summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2021-10-16scsi: core: pm: Rely on the device driver core for async power managementBart Van Assche
Instead of implementing asynchronous resume support in the SCSI core, rely on the device driver core for resuming SCSI devices asynchronously. Instead of only supporting asynchronous resumes, also support asynchronous suspends. Link: https://lore.kernel.org/r/20211006215453.3318929-2-bvanassche@acm.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/testing/selftests/net/ioam6.sh 7b1700e009cc ("selftests: net: modify IOAM tests for undef bits") bf77b1400a56 ("selftests: net: Test for the IOAM encapsulation with IPv6") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12scsi: hisi_sas: Disable SATA disk phy for severe I_T nexus reset failureLuo Jiaxing
If the softreset fails in the I_T reset, libsas will then continue to issue a controller reset to try to recover. However a faulty disk may cause the softreset to fail, and resetting the controller will not help this scenario. Indeed, we will just continue the cycle of error handle handling to try to recover. So if the softreset fails upon certain conditions, just disable the phy associated with the disk. The user needs to handle this problem. Link: https://lore.kernel.org/r/1634041588-74824-5-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12scsi: libsas: Export sas_phy_enable()Luo Jiaxing
Export sas_phy_enable() so LLDDs can directly use it to control remote phys. We already do this for companion function sas_phy_reset(). Link: https://lore.kernel.org/r/1634041588-74824-4-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12scsi: hisi_sas: Wait for phyup in hisi_sas_control_phy()Xiang Chen
When issuing a hardreset/linkreset/phy_set_linkrate from sysfs, the phy will be disabled and re-enabled for the directly attached scenario. It takes some time for the phy to come back up after re-enabling the phy. If the controller becomes suspended while waiting for the phy to come back, the phy up may be lost (along with the disk). To solve this problem, wait for the phy up to occur with a timeout. Indeed this is already done in hisi_sas_debug_I_T_nexus_reset() for local phys, so just relocate the functionality to hisi_sas_control_phy(). Since the HA workqueue is drained when suspending the controller, and the phy control function is called from the same workqueue, we can guarantee that the controller will not be suspended during this period. Link: https://lore.kernel.org/r/1634041588-74824-3-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12scsi: hisi_sas: Initialise devices in .slave_alloc callbackXiang Chen
Perform driver-specific SCSI device initialization in the designated SCSI midlayer callback instead of relying on the libsas "device found" callback. The SCSI midlayer .slave_alloc interface is called prior to sending any I/O to the device. Link: https://lore.kernel.org/r/1634041588-74824-2-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12scsi: core: Put LLD module refcnt after SCSI device is releasedMing Lei
SCSI host release is triggered when SCSI device is freed. We have to make sure that the low-level device driver module won't be unloaded before SCSI host instance is released because shost->hostt is required in the release handler. Make sure to put LLD module refcnt after SCSI device is released. Fixes a kernel panic of 'BUG: unable to handle page fault for address' reported by Changhui and Yi. Link: https://lore.kernel.org/r/20211008050118.1440686-1-ming.lei@redhat.com Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reported-by: Changhui Zhong <czhong@redhat.com> Reported-by: Yi Zhang <yi.zhang@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12scsi: storvsc: Fix validation for unsolicited incoming packetsAndrea Parri (Microsoft)
The validation on the length of incoming packets performed in storvsc_on_channel_callback() does not apply to unsolicited packets with ID of 0 sent by Hyper-V. Adjust the validation for such unsolicited packets. Link: https://lore.kernel.org/r/20211007122828.469289-1-parri.andrea@gmail.com Fixes: 91b1b640b834b2 ("scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()") Reported-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12scsi: ufs: core: Fix synchronization between scsi_unjam_host() and ↵Adrian Hunter
ufshcd_queuecommand() The SCSI error handler calls scsi_unjam_host() which can call the queue function ufshcd_queuecommand() indirectly. The error handler changes the state to UFSHCD_STATE_RESET while running, but error interrupts that happen while the error handler is running could change the state to UFSHCD_STATE_EH_SCHEDULED_NON_FATAL which would allow requests to go through ufshcd_queuecommand() even though the error handler is running. Block that hole by checking whether the error handler is in progress. Link: https://lore.kernel.org/r/20211008084048.257498-1-adrian.hunter@intel.com Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12scsi: ufs: mediatek: Support vops pre suspend to disable auto-hibern8Peter Wang
Mediatek UFS needs auto-hibern8 disabled before suspend. Introduce a solution to do pre-suspend before SSU (sleep). Link: https://lore.kernel.org/r/20211006054705.21885-1-peter.wang@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12scsi: iscsi: Fix set_param() handlingMike Christie
In commit 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread") we meant to add a check where before we call ->set_param() we make sure the iscsi_cls_connection is bound. The problem is that between versions 4 and 5 of the patch the deletion of the unchecked set_param() call was dropped so we ended up with 2 calls. As a result we can still hit a crash where we access the unbound connection on the first call. This patch removes that first call. Fixes: 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread") Link: https://lore.kernel.org/r/20211010161904.60471-1-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Li Feng <fengli@smartx.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12scsi: core: Fix shost->cmd_per_lun calculation in scsi_add_host_with_dma()Dexuan Cui
After commit ea2f0f77538c ("scsi: core: Cap scsi_host cmd_per_lun at can_queue"), a 416-CPU VM running on Hyper-V hangs during boot because the hv_storvsc driver sets scsi_driver.can_queue to an integer value that exceeds SHRT_MAX, and hence scsi_add_host_with_dma() sets shost->cmd_per_lun to a negative "short" value. Use min_t(int, ...) to work around the issue. Link: https://lore.kernel.org/r/20211008043546.6006-1-decui@microsoft.com Fixes: ea2f0f77538c ("scsi: core: Cap scsi_host cmd_per_lun at can_queue") Cc: stable@vger.kernel.org Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12scsi: csiostor: Uninitialized data in csio_ln_vnp_read_cbfn()Dan Carpenter
This variable is just a temporary variable, used to do an endian conversion. The problem is that the last byte is not initialized. After the conversion is completely done, the last byte is discarded so it doesn't cause a problem. But static checkers and the KMSan runtime checker can detect the uninitialized read and will complain about it. Link: https://lore.kernel.org/r/20211006073242.GA8404@kili Fixes: 5036f0a0ecd3 ("[SCSI] csiostor: Fix sparse warnings.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12Merge branch '5.15/scsi-fixes' into 5.16/scsi-stagingMartin K. Petersen
Merge the 5.15/scsi-fixes branch into the staging tree to resolve UFS conflict reported by sfr. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-05scsi: smartpqi: Update version to 2.1.12-055Don Brace
Update driver version to reflect changes. Link: https://lore.kernel.org/r/20210928235442.201875-12-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Add 3252-8i PCI idMike McGowen
Add PCI ID information for the Adaptec SmartRAID 3252-8i controller: 9005 / 028F / 9005 / 14A2 Link: https://lore.kernel.org/r/20210928235442.201875-11-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Fix duplicate device nodes for tape changersKevin Barnett
Stop the OS from re-discovering multiple LUNs for tape drive and medium changer. Duplicate device nodes for Ultrium tape drive and medium changer are being created. The Ultrium tape drive is a multi-LUN SCSI target. It presents a LUN for the tape drive and a 2nd LUN for the medium changer. Our controller FW lists both LUNs in the RPL results. As a result, the smartpqi driver exposes both devices to the OS. Then the OS does its normal device discovery via the SCSI REPORT LUNS command, which causes it to re-discover both devices a 2nd time, which results in the duplicate device nodes. Link: https://lore.kernel.org/r/20210928235442.201875-10-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Fix boot failure during LUN rebuildMike McGowen
Move the delay in the register polling loop to the beginning of the loop to ensure there is always a delay between writing the register and reading it. Link: https://lore.kernel.org/r/20210928235442.201875-9-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Add extended report physical LUNsMike McGowen
Add support for the new extended formats in the data returned from the Report Physical LUNs command for controllers that enable this feature. The new formats allow the reporting of 16-byte WWIDs. Link: https://lore.kernel.org/r/20210928235442.201875-8-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Avoid failing I/Os for offline devicesMahesh Rajashekhara
Prevent kernel crash by failing outstanding I/O request when the OS takes device offline. When posted I/Os to the controller's inbound queue are not picked by the controller, the driver will halt the controller and take the controller offline. When the driver takes the controller offline, the driver will fail all the outstanding requests which can sometimes lead to an OS crash. Link: https://lore.kernel.org/r/20210928235442.201875-7-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Add TEST UNIT READY check for SANITIZE operationDon Brace
Send a TEST UNIT READY to HBA disks and do not present them to the OS if 0x02/0x04/0x1b (SANITIZE IN PROGRESS) is returned. During boot-up, some OSes appear to hang when there are one or more disks undergoing a sanitize operation. According to SCSI SBC4 specification section 4.11.2 "Commands allowed during SANITIZE", some SCSI commands are permitted, but read/write operations are not. When the OS attempts to read the disk partition table a CHECK CONDITION ASC 0x04 ASCQ 0x1b is returned which causes the OS to retry the read until SANITIZE has completed. This can take hours. According to document HPE Smart Storage Administrator User Guide, during the sanitize erase operation, the drive is unusable. I.e. the expected behavior for SANITIZE is the that disk remains offline even after SANITIZE has completed. The customer is expected to re-enable the disk using the management utility. Link: https://lore.kernel.org/r/20210928235442.201875-6-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Update LUN reset handlerKevin Barnett
Enhance check for commands queued to the controller. Add new function pqi_nonempty_inbound_queue_count() that will wait for all I/O queued for submission to controller across all queue groups to drain. Add helper functions to obtain queue command counts for each queue group. These queues should drain quickly as they are already staged to be submitted down to the controller's IB queue. Enhance check for outstanding command completion. Update the count of outstanding commands while waiting. This value was not re-obtained and was potentially causing infinite wait for all completions. Link: https://lore.kernel.org/r/20210928235442.201875-5-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Capture controller reason codesMurthy Bhat
In some rare cases, the driver can halt the controller. Add a reason code describing why the controller was halted. Store this reason code in a controller register to aid in debugging the issue. Link: https://lore.kernel.org/r/20210928235442.201875-4-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Add controller handshake during kdumpMahesh Rajashekhara
Correct kdump hangs when controller is locked up. There are occasions when a controller reboot (controller soft reset) is issued when a controller firmware crash dump is in progress. This leads to incomplete controller firmware crash dump: - When the controller crash dump is in progress, and a kdump is initiated, the driver issues inbound doorbell reset to bring back the controller in SIS mode. - If the controller is in locked up state, the inbound doorbell reset does not work causing controller initialization failures. This results in the driver hanging waiting for SIS mode. To avoid an incomplete controller crash dump, add in a controller crash dump handshake: - Controller will indicate start and end of the controller crash dump by setting some register bits. - Driver will look these bits when a kdump is initiated. If a controller crash dump is in progress, the driver will wait for the controller crash dump to complete before issuing the controller soft reset then complete driver initialization. Link: https://lore.kernel.org/r/20210928235442.201875-3-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Update device removal managementDon Brace
Update device removal path to handle issues for: - rmmod: Correct stack trace when removing devices. - rmmod: Synchronize SCSI cache. - Update handling for removing devices using sysfs. Link: https://lore.kernel.org/r/20210928235442.201875-2-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: mpi3mr: Clean up mpi3mr_print_ioc_info()Dan Carpenter
This function is more complicated than necessary. If we change from scnprintf() to snprintf() that lets us remove the if bytes_wrote < sizeof(protocol) checks. Also, we can use bytes_wrote ? "," : "" to print the comma and remove the separate if statement and the "is_string_nonempty" variable. [mkp: a few formatting cleanups and s/wrote/written/] Link: https://lore.kernel.org/r/20210916132605.GF25094@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: iscsi: Fix iscsi_task use after freeMike Christie
Commit d39df158518c ("scsi: iscsi: Have abort handler get ref to conn") added iscsi_get_conn()/iscsi_put_conn() calls during abort handling but then also changed the handling of the case where we detect an already completed task where we now end up doing a goto to the common put/cleanup code. This results in a iscsi_task use after free, because the common cleanup code will do a put on the iscsi_task. This reverts the goto and moves the iscsi_get_conn() to after we've checked if the iscsi_task is valid. Link: https://lore.kernel.org/r/20211004210608.9962-1-michael.christie@oracle.com Fixes: d39df158518c ("scsi: iscsi: Have abort handler get ref to conn") Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: lpfc: Fix memory overwrite during FC-GS I/O abort handlingJames Smart
When an FC-GS I/O is aborted by lpfc, the driver requires a node pointer for a dereference operation. In the abort I/O routine, the driver miscasts a context pointer to the wrong data type and overwrites a single byte outside of the allocated space. This miscast is done in the abort I/O function handler because the handler works on both FC-GS and FC-LS commands. However, the code neglected to get the correct job location for the node. Fix this by acquiring the necessary node pointer from the correct job structure depending on the I/O type. Link: https://lore.kernel.org/r/20211004231210.35524-1-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: elx: efct: Delete stray unlock statementDan Carpenter
It's not holding the lock at this stage and the IRQ "flags" are not correct so it would restore something bogus. Delete the unlock statement. Link: https://lore.kernel.org/r/20211004103851.GE25015@kili Fixes: 3e6414003bf9 ("scsi: elx: efct: SCSI I/O handling routines") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: pm80xx: Fix misleading log statement in pm8001_mpi_get_nvmd_resp()Igor Pylypiv
pm8001_mpi_get_nvmd_resp() handles a GET_NVMD_DATA response, not a SET_NVMD_DATA response, as the log statement implies. Fixes: 1f889b58716a ("scsi: pm80xx: Fix pm8001_mpi_get_nvmd_resp() race condition") Link: https://lore.kernel.org/r/20210929025847.646999-1-ipylypiv@google.com Reviewed-by: Changyuan Lyu <changyuanl@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: pm80xx: Replace open coded check with dev_is_expander()Igor Pylypiv
This is a follow up cleanup to the commit 924a3541eab0 ("scsi: libsas: aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander()") Link: https://lore.kernel.org/r/20210929025807.646589-1-ipylypiv@google.com Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: target: ibm_vscsi: Replace enable attr with ops.enableDmitry Bogdanov
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-7-d.bogdanov@yadro.com Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: target: qla2xxx: Replace enable attr with ops.enableDmitry Bogdanov
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-4-d.bogdanov@yadro.com Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: megaraid_sas: Driver version update to 07.719.03.00-rc1Sumit Saxena
Link: https://lore.kernel.org/r/20210929124022.24605-4-sumit.saxena@broadcom.com Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: megaraid_sas: Add helper functions for irq_contextSumit Saxena
Adding helper functions for ISR access and release to improve readability. Link: https://lore.kernel.org/r/20210929124022.24605-3-sumit.saxena@broadcom.com Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: megaraid_sas: Fix concurrent access to ISR between IRQ polling and ↵Sumit Saxena
real interrupt IRQ polling thread calls ISR after enable_irq() to handle any missed I/O completion. The atomic flag "in_used" was added to have the synchronization between the IRQ polling thread and the interrupt context. There is a bug around it leading to a race condition. Below is the sequence: - IRQ polling thread accesses ISR, fetches the reply descriptor. - Real interrupt arrives and pre-empts polling thread (enable_irq() is already called). - Interrupt context picks the same reply descriptor as fetched by polling thread, processes it, and exits. - Polling thread resumes and processes the descriptor which is already processed by interrupt thread leads to kernel crash. Setting the "in_used" flag before fetching the reply descriptor ensures synchronized access to ISR. Link: https://www.spinics.net/lists/linux-scsi/msg159440.html Link: https://lore.kernel.org/r/20210929124022.24605-2-sumit.saxena@broadcom.com Fixes: 9bedd36e9146 ("scsi: megaraid_sas: Handle missing interrupts while re-enabling IRQs") Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: advansys: Fix kernel pointer leakGuo Zhi
Pointers should be printed with %p or %px rather than cast to 'unsigned long' and printed with %lx. Change %lx to %p to print the hashed pointer. Link: https://lore.kernel.org/r/20210929122538.1158235-1-qtxuning1999@sjtu.edu.cn Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: ufs: core: Do not exit ufshcd_err_handler() unless operational or deadAdrian Hunter
Callers of ufshcd_err_handler() expect it to return in an operational state. However, the code does not check the state before exiting. Add a check for the state and perform retries until either success or the maximum number of retries is reached. Link: https://lore.kernel.org/r/20211002154550.128511-3-adrian.hunter@intel.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: ufs: core: Do not exit ufshcd_reset_and_restore() unless operational ↵Adrian Hunter
or dead Callers of ufshcd_reset_and_restore() expect it to return in an operational state. However, the code only checks direct errors and so the ufshcd_state may not be UFSHCD_STATE_OPERATIONAL due to error interrupts. Fix by also checking ufshcd_state, still allowing non-fatal errors which are left for the error handler to deal with. Link: https://lore.kernel.org/r/20211002154550.128511-2-adrian.hunter@intel.com Reviewed-by: Avri altman <avri.altman@wdc.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: ufs: core: Stop clearing UNIT ATTENTIONSBart Van Assche
Commit aa53f580e67b ("scsi: ufs: Minor adjustments to error handling") introduced a ufshcd_clear_ua_wluns() call in ufshcd_err_handling_unprepare(). As explained in detail by Adrian Hunter, this can trigger a deadlock. Avoid that deadlock by removing the code that clears the unit attention. This is safe because the only software that relies on clearing unit attentions is the Android Trusty software and because support for handling unit attentions has been added in the Trusty software. See also https://lore.kernel.org/linux-scsi/20210930124224.114031-2-adrian.hunter@intel.com/ Note that "scsi: ufs: Retry START_STOP on UNIT_ATTENTION" is a prerequisite for this commit. Link: https://lore.kernel.org/r/20211001182015.1347587-3-jaegeuk@kernel.org Fixes: aa53f580e67b ("scsi: ufs: Minor adjustments to error handling") Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Bart Van Assche <bvanassche@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: ufs: core: Retry START_STOP on UNIT_ATTENTIONJaegeuk Kim
Commit 57d104c153d3 ("ufs: add UFS power management support") made the UFS driver submit a REQUEST SENSE command before submitting a power management command to a WLUN to clear the POWER ON unit attention. Instead of submitting a REQUEST SENSE command before submitting a power management command, retry the power management command until it succeeds. This is the preparation to get rid of all UNIT ATTENTION code which should be handled by users. Link: https://lore.kernel.org/r/20211001182015.1347587-2-jaegeuk@kernel.org Cc: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: ufs: core: Remove return statement in void functionBean Huo
Return statement is not useful at the end of "void" function. Link: https://lore.kernel.org/r/20210929200640.828611-4-huobean@gmail.com Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: ufs: core: Fix ufshcd_probe_hba() prototype to match the definitionBean Huo
Since commit 568dd9959611 ("scsi: ufs: Rename the second ufshcd_probe_hba() argument"), the second ufshcd_probe_hba() argument has been changed to init_dev_params. Link: https://lore.kernel.org/r/20210929200640.828611-3-huobean@gmail.com Fixes: 568dd9959611 ("scsi: ufs: Rename the second ufshcd_probe_hba() argument") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: ufs: core: Fix NULL pointer dereferenceBean Huo
Calling ufshcd_rpm_{get/put}_sync() prior to ufshcd_scsi_add_wlus() being called will trigger a NULL pointer dereference. This is because hba->sdev_ufs_device is initialized in ufshcd_scsi_add_wlus(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000348 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000348] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 91 Comm: kworker/u16:1 Not tainted 5.15.0-rc1-beanhuo-linaro-1423 Hardware name: MicronRB (DT) Workqueue: events_unbound async_run_entry_fn pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : pm_runtime_drop_link+0x128/0x338 lr : ufshpb_get_dev_info+0x8c/0x148 sp : ffff800012573c10 x29: ffff800012573c10 x28: 0000000000000000 x27: 0000000000000003 x26: ffff000001d21298 x25: 000000005abcea60 x24: ffff800011d89000 x23: 0000000000000001 x22: ffff000001d21880 x21: ffff000001ec9300 x20: 0000000000000004 x19: 0000000000000198 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000041400 x14: 5eee00201100200a x13: 000000000000bb03 x12: 0000000000000000 x11: 0000000000000100 x10: 0200000000000000 x9 : bb0000021a162c01 x8 : 0302010021021003 x7 : 0000000000000000 x6 : ffff800012573af0 x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000200 x2 : 0000000000000348 x1 : 0000000000000348 x0 : ffff80001095308c Call trace: pm_runtime_drop_link+0x128/0x338 ufshpb_get_dev_info+0x8c/0x148 ufshcd_probe_hba+0xda0/0x11b8 ufshcd_async_scan+0x34/0x330 async_run_entry_fn+0x38/0x180 process_one_work+0x1f4/0x498 worker_thread+0x48/0x480 kthread+0x140/0x158 ret_from_fork+0x10/0x20 Code: 88027c01 35ffffa2 17fff6c4 f9800051 (885f7c40) ---[ end trace 2ba541335f595c95 ] ufshpb_get_dev_info() is only called during asynchronous scanning and at that time pm_runtime_get_sync() has been called: ... /* Hold auto suspend until async scan completes */ pm_runtime_get_sync(dev); atomic_set(&hba->scsi_block_reqs_cnt, 0); ... ufshcd_async_scan() ufshcd_probe_hba(hba, true); ufshcd_device_params_init(hba); ufshpb_get_dev_info(); ... pm_runtime_put_sync(hba->dev); Remove ufshcd_rpm_{get/put}_sync() from ufshpb_get_dev_info() to fix this problem. Link: https://lore.kernel.org/r/20210929200640.828611-2-huobean@gmail.com Fixes: 351b3a849ac7 ("scsi: ufs: ufshpb: Use proper power management API") Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: ufs: core: Fix task management completionAdrian Hunter
The UFS driver uses blk_mq_tagset_busy_iter() when identifying task management requests to complete, however blk_mq_tagset_busy_iter() doesn't work. blk_mq_tagset_busy_iter() only iterates requests dispatched by the block layer. That appears as if it might have started since commit 37f4a24c2469 ("blk-mq: centralise related handling into blk_mq_get_driver_tag") which removed 'data->hctx->tags->rqs[rq->tag] = rq' from blk_mq_rq_ctx_init() which gets called: blk_get_request blk_mq_alloc_request __blk_mq_alloc_request blk_mq_rq_ctx_init Since UFS task management requests are not dispatched by the block layer, hctx->tags->rqs[rq->tag] remains NULL, and since blk_mq_tagset_busy_iter() relies on finding requests using hctx->tags->rqs[rq->tag], UFS task management requests are never found by blk_mq_tagset_busy_iter(). By using blk_mq_tagset_busy_iter(), the UFS driver was relying on internal details of the block layer, which was fragile and subsequently got broken. Fix by removing the use of blk_mq_tagset_busy_iter() and having the driver keep track of task management requests. Link: https://lore.kernel.org/r/20210922091059.4040-1-adrian.hunter@intel.com Fixes: 1235fc569e0b ("scsi: ufs: core: Fix task management request completion timeout") Fixes: 69a6c269c097 ("scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs") Cc: stable@vger.kernel.org Tested-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: acornscsi: Remove scsi_cmd_to_tag() referenceJohn Garry
Commit 756fb6a895af ("scsi: acornscsi: Remove tagged queuing vestiges") mistakenly introduced a reference to function scsi_cmd_to_tag(). This function does not exist as it was removed from an earlier series version when I upstreamed the named commit - originally authored By Hannes - but this reference still remained. Fix by replacing the reference to scsi_cmd_to_tag() with scsi_cmd_to_rq(scsi_scmd)->tag, which scsi_cmd_to_tag() was a wrapper for. Link: https://lore.kernel.org/r/1633002717-79765-1-git-send-email-john.garry@huawei.com Fixes: 756fb6a895af ("scsi: acornscsi: Remove tagged queuing vestiges") Reported-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: core: Fix spelling in a source code commentBart Van Assche
The typo in this source code comment makes the comment confusing. Clear up the confusion by fixing the typo. Link: https://lore.kernel.org/r/20210929182318.2060489-1-bvanassche@acm.org Fixes: bc85dc500f9d ("scsi: remove scsi_end_request") Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04qed: Update the TCP active termination 2 MSL timer ("TIME_WAIT")Prabhakar Kushwaha
Initialize 2 MSL timeout value used for the TCP TIME_WAIT state to non-zero default. This patch also removes magic number from qedi/qedi_main.c. Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nikolay Assa <nassa@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Update TCP silly-window-syndrome timeout for iwarp, scsiNikolay Assa
Update TCP silly-window-syndrome timeout, for the cases where initiator's small TCP window size prevents FW from transmitting packets on the connection. Timeout causes FW to retransmit window probes if needed, preventing I/O stall if initiator ignores first window probe. Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nikolay Assa <nassa@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 16:55:55 +0000