summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2014-11-12scsi: return EAGAIN when resetting a device under EHChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12osst: call scsi_set_medium_removal directlyChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12st: call scsi_set_medium_removal directlyChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12sd: fix up ->compat_ioctlChristoph Hellwig
No need to verify the passthrough ioctls, the real handler will take care of that. Also make sure not to block for resets on O_NONBLOCK fds. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: split scsi_nonblockable_ioctlChristoph Hellwig
The calling conventions for this function are bad as it could return -ENODEV both for a device not currently online and a not recognized ioctl. Add a new scsi_ioctl_block_when_processing_errors function that wraps scsi_block_when_processing_errors with the a special case for the SG_SCSI_RESET ioctl command, and handle the SG_SCSI_RESET case itself in scsi_ioctl. All callers of scsi_ioctl now must call the above helper to check for the EH state, so that the ioctl handler itself doesn't have to. Reported-by: Robert Elliott <Elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: refactor scsi_reset_provider handlingChristoph Hellwig
Pull the common code from the two callers into the function, and rename it to scsi_ioctl_reset. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: add support for multiple hardware queuesBart Van Assche
Allow a SCSI LLD to declare how many hardware queues it supports by setting Scsi_Host.nr_hw_queues before calling scsi_add_host(). Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: ratelimit I/O error messagesHannes Reinecke
There can be quite a lot of I/O error messages, even on smaller machines. So we need to ratelimit them to not overwhelm logging. Signed-off-by: Hannes Reinecke <hare@suse.de> Tested-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: correct return values for .eh_abort_handler implementationsHannes Reinecke
The .eh_abort_handler needs to return SUCCESS, FAILED, or FAST_IO_FAIL. So fixup all callers to adhere to this requirement. Reviewed-by: Robert Elliott <elliott@hp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: document scsi_try_to_abort_cmdHannes Reinecke
scsi_try_to_abort_cmd() should only return SUCCESS, FAILED, or FAST_IO_FAIL. So document that in the function description and simplify the logging message. Signed-off-by: Hannes Reinecke <hare@suse.de> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: use shost argument in scsi_eh_prt_fail_statsHannes Reinecke
The EH statistics are per host, so we should be using shost_printk() here. Signed-off-by: Hannes Reinecke <hare@suse.de> Suggested-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: fixup logging messages in scsi_error.cHannes Reinecke
Use the matching scope for logging messages to allow for better command tracing. Signed-off-by: Hannes Reinecke <hare@suse.de> Suggested-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: simplify scsi_log_(send|completion)Hannes Reinecke
Simplify scsi_log_(send|completion) by externalizing scsi_mlreturn_string() and always print the command address. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: remove scsi_show_result()Hannes Reinecke
Open-code scsi_print_result in sd.c, and cleanup logging to not print duplicate informations. Also remove the call to scsi_show_result() in ufshcd.c to be consistent with other callers of scsi_execute(). With that we can remove scsi_show_result in constants.c Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: separate out scsi_(host|driver)byte_string()Hannes Reinecke
Export functions for later use. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: Remove scsi_print_command when calling abortHannes Reinecke
Calling scsi_print_command should not be necessary during abort; if the information is required one should enable scsi logging. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: repurpose the last argument from print_opcode_name()Hannes Reinecke
print_opcode_name() was only ever called with a '0' argument from LLDDs and ULDs which were _not_ supporting variable length CDBs, so the 'if' clause was never triggered. Instead we should be using the last argument to specify the cdb length to avoid accidental overflow when reading the cdb buffer. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: consolidate opcode lookup in scsi_opcode_sa_name()Hannes Reinecke
Consolidate the CDB opcode lookup in scsi_opcode_sa_name(), so that we don't have to call several functions to figure out the CDB opcode string. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: merge print_opcode_name()Hannes Reinecke
Instead of having two versions of print_opcode_name() we should be consolidating them into one version. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: implement scsi_opcode_sa_nameHannes Reinecke
Implement a lookup array for SERVICE ACTION commands instead of hardcoding it in a large switch statement. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: remove scsi_print_status()Hannes Reinecke
Last caller is gone, so we can remove it. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: use 'bool' as return value for scsi_normalize_sense()Hannes Reinecke
Convert scsi_normalize_sense() and friends to return 'bool' instead of an integer. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Reviewed-by: Yoshihiro Yunomae <yoshihiro.yunomae.ez@hitachi.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: do not decode sense extrasHannes Reinecke
Currently we're only decoding sense extras for tape devices. And even there only for fixed format sense formats. As this is of rather limited use in the general case we should be stop trying to decode sense extras; the tape driver does its own decoding anyway. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: stop decoding if scsi_normalize_sense() failsHannes Reinecke
If scsi_normalize_sense() fails we couldn't decode the sense buffer, and the scsi_sense_hdr fields are invalid. For those cases we should rather dump the sense buffer and not try to decode invalid fields. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-1253c700: remove scsi_print_sense() usageHannes Reinecke
The 53c700 driver would be using scsi_print_sense() in a debug statement, which was never compiled in. Plus the same information can get retrieved with logging. So remove it. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12fas216: update logging messagesHannes Reinecke
Update logging messages to use dev_printk() variants for correct device annotations. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12fas216: return DID_ERROR for incomplete data transferHannes Reinecke
fas216 returns DID_BAD_TARGET for an incomplete data transfer. The midlayer uses DID_BAD_TARGET to signal a non-existing or not reachable target. So we should rather be using DID_ERROR here. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12acornscsi: use scsi_print_command()Hannes Reinecke
Update acornscsi to use scsi_print_command() instead of the underscore version and use scmd_printk() in acornscsi_done(). This will add correct device annotations in the resulting message. And we should be using set_host_byte() for setting the final result. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: use sdev as argument for sense code printingHannes Reinecke
We should be using the standard dev_printk() variants for sense code printing. [hch: remove __scsi_print_sense call in xen-scsiback, Acked by Juergen] [hch: folded bracing fix from Dan Carpenter] Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: introduce sdev_prefix_printk()Hannes Reinecke
Like scmd_printk(), but the device name is passed in as a string. Can be used by eg ULDs which do not have access to the scsi_cmnd structure. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12aha152x: debug output update and whitespace cleanupHannes Reinecke
Remove all uncommented debugging code and move all printk() statements over to dev_printk(). And while we're at it we should be doing a whitespace cleanup, too. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12sd: remove scsi_print_sense() in sd_done()Hannes Reinecke
sd_done() was calling scsi_print_sense() for a sense code of 'NO_SENSE'. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: remove scsi_cmd_print_sense_hdr()Hannes Reinecke
Unused. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12st: add a debug_flag module parameter requestLaurence Oberman
This patch adds a debug_flag parameter that can be set on module load, and allows the DEBUG facility without a module recompile. Note that now DEBUG 1 is the default with this patch. Usage: modprobe st debug_flag=1 Signed-off-by: Laurence Oberman <loberman@redhat.com> Acked-by: Kai M??kisara <kai.makisara@kolumbus.fi> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: add SG_SCSI_RESET_NO_ESCALATE flag to SG_SCSI_RESET ioctlDouglas Gilbert
Further to a January 2013 thread titled: "[PATCH] SG_SCSI_RESET ioctl should only perform requested operation" by Jeremy Linton a patch (v3) is presented that expands the existing ioctl to include "no_escalate" versions to the existing resets. This requires no changes to SCSI low level drivers (LLDs); it adds several more finely tuned reset options to the user space. For example: /* This call remains the same, with the same escalating semantics * if the device (LU) reset fail. That is: on failure to try a * target reset and if that fails, try a bus reset, and if that fails * try a host (i.e. LLD) reset. */ val = SG_SCSI_RESET_DEVICE; res = ioctl(<sg_or_block_fd>, SG_SCSI_RESET, &val); /* What follows is a new option introduced by this patch series. Only * a device reset is attempted. If that fails then an appropriate * error code is provided. N.B. There is no reset escalation. */ val = SG_SCSI_RESET_DEVICE | SG_SCSI_RESET_NO_ESCALATE; res = ioctl(<sg_or_block_fd>, SG_SCSI_RESET, &val); Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Jeremy Linton <jlinton@tributary.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: PC partition tables are little endianChristoph Hellwig
As sparse correctly pointed out, scsi_partsize should use get_unaligned_le32 to read PC partition tables from disk, as they are little endian. The result of this bug is that we returned incorrect geometries on big endian systems when using the scsicam variant. Which probably doesn't matter as only old x86 systems every cared about the geometry. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: resolve some missing-field-initializers warningsMark Rustad
Resolve some missing-field-initializers warnings by using designated initialization. [hch: W=2 with modern gcc warns about this. Pretty pointless to me, but I'd prefer to keep us warning free] Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: fix off-by-one LUN check in scsi_scan_host_selected()Mark Knibbs
The Scsi_Host structure max_lun field is the maximum allowed LUN plus 1. So a LUN value is invalid if >= max_lun. Signed-off-by: Mark Knibbs <markk@clara.co.uk> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: fix trivial typos in scsi_scan.c commentMark Knibbs
Signed-off-by: Mark Knibbs <markk@clara.co.uk> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-10cxgb4: Cleanup macros so they follow the same style and look consistent, part 2Hariprasad Shenai
Various patches have ended up changing the style of the symbolic macros/register defines to different style. As a result, the current kernel.org files are a mix of different macro styles. Since this macro/register defines is used by different drivers a few patch series have ended up adding duplicate macro/register define entries with different styles. This makes these register define/macro files a complete mess and we want to make them clean and consistent. This patch cleans up a part of it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10cxgb4: Cleanup macros so they follow the same style and look consistentHariprasad Shenai
Various patches have ended up changing the style of the symbolic macros/register to different style. As a result, the current kernel.org files are a mix of different macro styles. Since this macro/register defines is used by different drivers a few patch series have ended up adding duplicate macro/register define entries with different styles. This makes these register define/macro files a complete mess and we want to make them clean and consistent. This patch cleans up a part of it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10bnx2fc: fix tgt spinlock lockingMaurizio Lombardi
bnx2fc_queuecommand(): when allocating a new io_req, the tgt_lock spinlock must be locked before calling bnx2fc_cmd_alloc(). The spinlock should also be kept locked until bnx2fc_post_io_req() has been completed. If not, a kernel thread may call bnx2fc_process_cq_compl() that extracts the newly allocated io_req from hba->cmd_mgr->cmds and destroys it while it is still being used by bnx2fc_post_io_req(). BUG: unable to handle kernel NULL pointer dereference at 000000000000004c IP: [<ffffffffa03130da>] bnx2fc_init_task+0x6a/0x230 [bnx2fc] PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/0000:04:00.3/net/eth3/type CPU 33 Modules linked in: autofs4 target_core_iblock target_core_file target_core_pscsi target_core_mod configfs bnx2fc cnic uio fcoe libfcoe libfc scsi_transport_fc 8021q garp scsi_tgt stp llc cpufreq_ondemand freq_table pcc_cpufreq ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 power_meter microcode iTCO_wdt iTCO_vendor_support hpilo hpwdt sg bnx2x libcrc32c mdio serio_raw lpc_ich mfd_core shpchp ext4 jbd2 mbcache sd_mod crc_t10dif hpsa video output dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 7355, comm: bnx2fc_thread/3 Not tainted 2.6.32-431.el6.x86_64 #1 HP ProLiant BL460c Gen8 RIP: 0010:[<ffffffffa03130da>] [<ffffffffa03130da>] bnx2fc_init_task+0x6a/0x230 [bnx2fc] RSP: 0018:ffff8820b0da3b68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff882003801080 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff882003801100 RBP: ffff8820b0da3bc8 R08: ffffffff8160d4e8 R09: 0000000000000040 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88400e600e00 R13: ffff8840108fbe40 R14: ffff88200ffe5400 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8820b0da0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 000000000000004c CR3: 0000002010b67000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process bnx2fc_thread/3 (pid: 7355, threadinfo ffff88401f940000, task ffff884012f5f540) Stack: ffff8820b0da3bc8 ffffffff81527303 ffff884000000020 ffff8820b0da3bd8 <d> ffff8820b0da3b98 000000028138931a ffff88400f506078 ffff88400e600e00 <d> ffff88200ffe5400 ffff88200ffe5590 0000000000000021 0000000000000002 Call Trace: <IRQ> [<ffffffff81527303>] ? printk+0x41/0x46 [<ffffffffa03169bc>] bnx2fc_post_io_req+0x11c/0x440 [bnx2fc] [<ffffffff812825b9>] ? cpumask_next_and+0x29/0x50 [<ffffffff8137ffd0>] ? scsi_done+0x0/0x60 [<ffffffffa0316df7>] bnx2fc_queuecommand+0x117/0x140 [bnx2fc] [<ffffffff81380245>] scsi_dispatch_cmd+0xe5/0x310 [<ffffffff81388b9e>] scsi_request_fn+0x5ee/0x7a0 [<ffffffff812658f1>] __blk_run_queue+0x31/0x40 [<ffffffff81265a40>] blk_run_queue+0x30/0x50 [<ffffffff81387da6>] scsi_run_queue+0xc6/0x270 [<ffffffff81260f92>] ? elv_requeue_request+0x52/0xa0 [<ffffffff813897a0>] scsi_requeue_command+0x90/0xb0 [<ffffffff81389b84>] scsi_io_completion+0x154/0x6c0 [<ffffffff8137ff62>] scsi_finish_command+0xc2/0x130 [<ffffffff8138a255>] scsi_softirq_done+0x145/0x170 [<ffffffff8126e865>] blk_done_softirq+0x85/0xa0 [<ffffffff8107a8e1>] __do_softirq+0xc1/0x1e0 [<ffffffff8100c30c>] ? call_softirq+0x1c/0x30 [<ffffffff8100c30c>] call_softirq+0x1c/0x30 <EOI> [<ffffffff8100fa75>] ? do_softirq+0x65/0xa0 [<ffffffff8107a40a>] local_bh_enable_ip+0x9a/0xb0 [<ffffffff8152a4eb>] _spin_unlock_bh+0x1b/0x20 [<ffffffffa0313937>] bnx2fc_process_cq_compl+0x257/0x2b0 [bnx2fc] [<ffffffffa03114ea>] bnx2fc_percpu_io_thread+0xea/0x160 [bnx2fc] [<ffffffffa0311400>] ? bnx2fc_percpu_io_thread+0x0/0x160 [bnx2fc] [<ffffffff8109aef6>] kthread+0x96/0xa0 [<ffffffff8100c20a>] child_rip+0xa/0x20 [<ffffffff8109ae60>] ? kthread+0x0/0xa0 [<ffffffff8100c200>] ? child_rip+0x0/0x20 Code: 89 df 45 8b 7e 30 0f 85 75 01 00 00 89 d1 31 c0 c1 e9 03 83 e2 04 89 c9 f3 48 ab 74 06 c7 07 00 00 00 00 49 89 9c 24 88 01 00 00 <83> 7e 4c 01 b8 01 00 00 00 0f 84 e7 00 00 00 89 c2 0a 53 38 41 RIP [<ffffffffa03130da>] bnx2fc_init_task+0x6a/0x230 [bnx2fc] RSP <ffff8820b0da3b68> CR2: 000000000000004c Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-10megaraid_sas: fix bug in handling return value of pci_enable_msix_range()Jiang Liu
Function pci_enable_msix_range() may return negative values for error conditions. So it's a bug by checking (pci_enable_msix_range() != 0) for success and causes failure to megaraid driver when MSI is disabled. [ 16.487267] megaraid_sas 0000:02:00.0: Controller type: iMR [ 16.487275] genirq: Flags mismatch irq 0. 00000000 (megasas) vs. 00015a00 (tii mer) [ 16.487347] megasas: Failed to register IRQ for vector 0. Fixes: 8ae80ed1734b "megaraid: Use pci_enable_msix_range() instead of pci_enable_msix()" Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> # 3.17
2014-11-10cxgb4i: send abort_rpl correctlyAnish Bhatt
Connection retries were not being cleaned up correctly if they failed as a result of link down. Applies on top of drivers-for-3.18. Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-10scsi: TUR path is down after adapter gets reset with multipathwenxiong@linux.vnet.ibm.com
This patch fixes an issue with multipath ipr SAS devices which require a start unit command to be issued following an adapter reset. Without this patch, paths get marked failed following an adapter reset and since the error handler never gets invoked to issue the start unit, the paths are never recovered. Returning FAILED for this case ensures the error handler wakes up to issue the start unit. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-10scsi: call device handler for failed TUR commandChristoph Hellwig
Multipath devices using the TUR path checker need to see the sense code for a failed TUR command in their device handler. Since commit 14216561e164671ce147458653b1fea06a we always return success for mid layer issued TUR commands before calling the device handler, which stopped the TUR path checker from working. Move the call to the device handler check sense method before the early return for TUR commands to give the device handler a chance to intercept them. Signed-off-by: Christoph Hellwig <hch@infradead.org> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-10scsi: only re-lock door after EH on devices that were resetChristoph Hellwig
Setups that use the blk-mq I/O path can lock up if a host with a single device that has its door locked enters EH. Make sure to only send the command to re-lock the door to devices that actually were reset and thus might have lost their state. Otherwise the EH code might be get blocked on blk_get_request as all requests for non-reset devices might be in use. Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Meelis Roos <meelis.roos@ut.ee> Tested-by: Meelis Roos <meelis.roos@ut.ee> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-11-05libsas: use ata_dev_classify()Hannes Reinecke
Use the ata device class from libata in libsas instead of checking the supported command set and switch to using ata_dev_classify() instead of our own method. Cc: Tejun Heo <tj@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-10-29blk-mq: add a 'list' parameter to ->queue_rq()Jens Axboe
Since we have the notion of a 'last' request in a chain, we can use this to have the hardware optimize the issuing of requests. Add a list_head parameter to queue_rq that the driver can use to temporarily store hw commands for issue when 'last' is true. If we are doing a chain of requests, pass in a NULL list for the first request to force issue of that immediately, then batch the remainder for deferred issue until the last request has been sent. Instead of adding yet another argument to the hot ->queue_rq path, encapsulate the passed arguments in a blk_mq_queue_data structure. This is passed as a constant, and has been tested as faster than passing 4 (or even 3) args through ->queue_rq. Update drivers for the new ->queue_rq() prototype. There are no functional changes in this patch for drivers - if they don't use the passed in list, then they will just queue requests individually like before. Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit (git 2.34.1) at 2025-09-14 15:46:42 +0000