summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2020-09-02scsi: hisi_sas: Add BIST support for phy FFELuo Jiaxing
Add BIST support for phy FFE (Feed forward equalizer) setting. The user can configure FFE through the new debugfs interface. FFE is a parameter used for link layer control. It will affect the link quality between the SAS controller and the backplane. In the BIST test, the FFE interface is provided to assist board testers in optimizing link parameters. The modification of the FFE parameter will affect the test after BIST or the normal running of the board. The user should save the initial FFE values and restore them after BIST test is complete. Link: https://lore.kernel.org/r/1598958790-232272-6-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: hisi_sas: Make phy index variable name consistentLuo Jiaxing
We use "phy_id" to identify phy in the BIST code but the rest of code always uses "phy_no". Change it for consistency. Link: https://lore.kernel.org/r/1598958790-232272-5-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: hisi_sas: Do not modify upper fields of PROG_PHY_LINK_RATE regLuo Jiaxing
When updating PROG_PHY_LINK_RATE to set linkrate for a phy we used a hard-coded initial value instead of getting the current value from the register. The assumption was that this register would not be modified, but in fact it was partially modified in a new version of hardware. The hard-coded value we used changed the default value of the register to a an incorrect setting and as a result the SAS controller could not change linkrate for the phy. Delete hard-coded value and always read the latest value of register before updating it. Link: https://lore.kernel.org/r/1598958790-232272-4-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: hisi_sas: Modify macro name for OOB phy linkrateLuo Jiaxing
The macro for OOB phy linkrate is named CFG_PROG_PHY_LINK_RATE_* but that is inaccurate. For clarification, include OOB in macro name. Link: https://lore.kernel.org/r/1598958790-232272-3-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: hisi_sas: Avoid accessing to SSP task for SMP I/OsXiang Chen
hisi_sas_slot_task_free() attempts to dereference SSP task for non-ATA tasks. If the task is SMP, the code may reference the wrong structure although this may not cause any problems. To avoid this, only access to SSP task when slot->n_elem_dif is not 0 which indicates this is an SSP task. Link: https://lore.kernel.org/r/1598958790-232272-2-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: fc: Add 256GBit speed setting to SCSI FC transportJames Smart
Add 256GBit speed setting to the SCSI FC transport. This speed can be reached via FC trunking techniques. Link: https://lore.kernel.org/r/20200831213518.48409-1-james.smart@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: fnic: Remove set but not used 'eth_hdrs_stripped'Jason Yan
This addresses the following gcc warning with "make W=1": drivers/scsi/fnic/fnic_fcs.c: In function ‘fnic_rq_cmpl_frame_recv’: drivers/scsi/fnic/fnic_fcs.c:840:15: warning: variable ‘eth_hdrs_stripped’ set but not used [-Wunused-but-set-variable] 840 | unsigned int eth_hdrs_stripped; | ^~~~~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/20200831081126.3251288-5-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: fnic: Remove set but not used 'fr_len'Jason Yan
This addresses the following gcc warning with "make W=1": drivers/scsi/fnic/fnic_fcs.c: In function ‘fnic_fcoe_send_vlan_req’: drivers/scsi/fnic/fnic_fcs.c:379:6: warning: variable ‘fr_len’ set but not used [-Wunused-but-set-variable] 379 | int fr_len; | ^~~~~~ Link: https://lore.kernel.org/r/20200831081126.3251288-4-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: fnic: Remove set but not used variable in is_fnic_fip_flogi_reject()Jason Yan
This addresses the following gcc warning with "make W=1": drivers/scsi/fnic/fnic_fcs.c: In function ‘is_fnic_fip_flogi_reject’: drivers/scsi/fnic/fnic_fcs.c:317:9: warning: variable ‘els_len’ set but not used [-Wunused-but-set-variable] 317 | size_t els_len = 0; | ^~~~~~~ drivers/scsi/fnic/fnic_fcs.c:312:21: warning: variable ‘els_dtype’ set but not used [-Wunused-but-set-variable] 312 | enum fip_desc_type els_dtype = 0; | ^~~~~~~~~ Link: https://lore.kernel.org/r/20200831081126.3251288-3-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: fnic: Remove set but not used 'old_vlan'Jason Yan
This addresses the following gcc warning with "make W=1": drivers/scsi/fnic/fnic_main.c: In function ‘fnic_set_vlan’: drivers/scsi/fnic/fnic_main.c:555:6: warning: variable ‘old_vlan’ set but not used [-Wunused-but-set-variable] 555 | u16 old_vlan; | ^~~~~~~~ Link: https://lore.kernel.org/r/20200831081126.3251288-2-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: fdomain_isa: Merge branches in fdomain_isa_match()Sergey Shtylyov
The *else* branch of the *if* (base) statement in fdomain_isa_match() is immediately followed by the *if* (!base) statement. Simplify the code by removing the unneeded *if*. Link: https://lore.kernel.org/r/df68e341-5113-4cf2-b64c-dc1ad0b686ac@omprussia.ru Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: qla2xxx: Fix the return valueXianting Tian
A negative error code should be returned. Link: https://lore.kernel.org/r/20200829075746.19166-1-tian.xianting@h3c.com Acked-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Xianting Tian <tian.xianting@h3c.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: arm: Avoid comma separated statementsJoe Perches
Use semicolons and braces. Link: https://lore.kernel.org/r/be30bb0f24a5fb4f70ca8ed7027ca7555816a3fb.1598331149.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: ufs: Handle LINERESET indication in err handlerCan Guo
PA Layer issues a LINERESET to the PHY at the recovery step in the Power Mode change operation. If it happens during auto or manual hibern8 enter, even if hibern8 enter succeeds, UFS power mode shall be set to PWM-G1 mode and kept in that mode after exit from hibern8, leading to bad performance. Handle the LINERESET in the eh_work by restoring power mode to HS mode after all pending reqs and tasks are cleared from doorbell. Link: https://lore.kernel.org/r/1598321228-21093-3-git-send-email-cang@codeaurora.org Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: ufs: Abort tasks before clearing them from doorbellCan Guo
To recover non-fatal errors, no full reset is required, err_handler only clears those pending TRs/TMRs so that SCSI layer can re-issue them. In current err_handler, TRs are directly cleared from UFS host's doorbell but not aborted from device side. However, according to the UFSHCI JEDEC spec, the host software shall use UTP Transfer Request List Clear Register to clear a task from UFS host's doorbell only when a UTP Transfer Request is expected to not be completed, e.g. when the host software receives a “FUNCTION COMPLETE” Task Management response which means a Transfer Request was aborted. To follow the UFSHCI JEDEC spec, in err_handler, abort one TR before clearing it from doorbell. Link: https://lore.kernel.org/r/1598321228-21093-2-git-send-email-cang@codeaurora.org Acked-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: smartpqi: Update copyrightDon Brace
Update driver copyright. Link: https://lore.kernel.org/r/159864896224.13630.9798419111015060967.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: hpsa: Update copyrightDon Brace
Add entry for Microchip. Link: https://lore.kernel.org/r/159864166227.12131.3427629298809272795.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: mpt3sas: Don't call disable_irq from IRQ poll handlerTomas Henzl
disable_irq() might sleep, replace it with disable_irq_nosync(). For synchronisation 'irq_poll_scheduled' is sufficient Fixes: 320e77acb3 scsi: mpt3sas: Irq poll to avoid CPU hard lockups Link: https://lore.kernel.org/r/20200901145026.12174-1-thenzl@redhat.com Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: megaraid_sas: Don't call disable_irq from process IRQ pollTomas Henzl
disable_irq() might sleep. Replace it with disable_irq_nosync() which is sufficient as irq_poll_scheduled protects against concurrently running complete_cmd_fusion() from megasas_irqpoll() and megasas_isr_fusion(). Link: https://lore.kernel.org/r/20200827165332.8432-1-thenzl@redhat.com Fixes: a6ffd5bf681 scsi: megaraid_sas: Call disable_irq from process IRQ poll Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02sd: open code revalidate_diskChristoph Hellwig
Instead of calling revalidate_disk just do the work directly by calling sd_revalidate_disk, and revalidate_disk_size where needed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01scsi: isci: Remove set but not used 'index'Jason Yan
This addresses the following gcc warning with "make W=1": drivers/scsi/isci/host.c: In function ‘sci_controller_complete_io’: drivers/scsi/isci/host.c:2674:6: warning: variable ‘index’ set but not used [-Wunused-but-set-variable] 2674 | u16 index; | ^~~~~ Link: https://lore.kernel.org/r/20200827125851.428071-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-01scsi: dpt_i2o: Remove set but not used 'pHba'Jason Yan
This addresses the following gcc warning with "make W=1": drivers/scsi/dpt_i2o.c: In function ‘adpt_slave_configure’: drivers/scsi/dpt_i2o.c:411:12: warning: variable ‘pHba’ set but not used [-Wunused-but-set-variable] 411 | adpt_hba* pHba; | ^~~~ Link: https://lore.kernel.org/r/20200827125812.427753-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-01scsi: qedi: Remove redundant NULL checkXu Wang
kfree_skb() handles a NULL skb argument so the additional check is unnecessary. Remove it. Link: https://lore.kernel.org/r/20200827092606.32148-1-vulab@iscas.ac.cn Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-01scsi: ufs: Make ufshcd_print_trs() consider UFSHCD_QUIRK_PRDT_BYTE_GRANEric Biggers
Fix ufshcd_print_trs() to consider UFSHCD_QUIRK_PRDT_BYTE_GRAN when using utp_transfer_req_desc::prd_table_length, so that it doesn't treat the number of bytes as the number of entries. Originally from Kiwoong Kim (https://lkml.kernel.org/r/20200218233115.8185-1-kwmad.kim@samsung.com). Link: https://lore.kernel.org/r/20200826021040.152148-1-ebiggers@kernel.org Fixes: 26f968d7de82 ("scsi: ufs: Introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk") Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-01scsi: aacraid: Remove erroneous fallthrough annotationDan Carpenter
This fallthrough annotation is unreachable so we can delete it. Link: https://lore.kernel.org/r/20200825112003.GD285523@mwanda Fixes: c4e2fbca374b ("scsi: aacraid: Reworked scsi command submission path") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-01scsi: scsi_debug: Implement lun_formatDouglas Gilbert
Implement 'flat space LUN addressing', which allows us to raise the max_lun limitation to 16384. The maximum number of LUNs prior to this patch was 256. Link: https://lore.kernel.org/r/20200821042249.5097-1-dgilbert@interlog.com Suggested-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-01scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATALuo Jiaxing
It was discovered that sdparm will fail when attempting to disable write cache on a SATA disk connected via libsas. In the ATA command set the write cache state is controlled through the SET FEATURES operation. This is roughly corresponds to MODE SELECT in SCSI and the latter command is what is used in the SCSI-ATA translation layer. A subtle difference is that a MODE SELECT carries data whereas SET FEATURES is defined as a non-data command in ATA. Set the DMA data direction to DMA_NONE if the requested ATA command is identified as non-data. [mkp: commit desc] Fixes: fa1c1e8f1ece ("[SCSI] Add SATA support to libsas") Link: https://lore.kernel.org/r/1598426666-54544-1-git-send-email-luojiaxing@huawei.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-01Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three minor fixes, all in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_debug: Remove superfluous close zone in resp_open_zone() scsi: libcxgbi: Fix a use after free in cxgbi_conn_xmit_pdu() scsi: qedf: Fix null ptr reference in qedf_stag_change_work
2020-08-31scsi: ufs: exynos: Enable UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRLKiwoong Kim
For Exynos, flush during hibern8 is sufficient. Manual flush will cause an increase in power usage. Link: https://lore.kernel.org/r/ef94af8f273316d50d7f50a0cac9c7be9b9316a1.1598319701.git.kwmad.kim@samsung.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-31scsi: ufs: Introduce skipping manual flush for Write BoosterKiwoong Kim
We have two knobs to control flush for write booster, fWriteBoosterBufferFlushDuringHibernate and fWriteBoosterBufferFlushEn. Some vendors use only fWriteBoosterBufferFlushDuringHibernate because this can reportedly cover most scenarios. Also, there have been some reports that flush by fWriteBoosterBufferFlushEn could lead to increased power consumption thanks to unexpected internal operations. Consequently, we need a way to enable or disable fWriteBoosterEn operations. Add quirk to bypass manual flush. Link: https://lore.kernel.org/r/ffdb0eda30515809f0ad9ee936b26917ee9b4593.1598319701.git.kwmad.kim@samsung.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-31scsi: lpfc: Update lpfc version to 12.8.0.4James Smart
Update lpfc version to 12.8.0.4 Link: https://lore.kernel.org/r/20200828175332.130300-5-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-31scsi: lpfc: Extend the RDF FPIN Registration descriptor for additional eventsJames Smart
Currently the driver registers for Link Integrity events only. This patch adds registration for the following FPIN types: - Delivery Notifications - Congestion Notification - Peer Congestion Notification Link: https://lore.kernel.org/r/20200828175332.130300-4-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-31scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discoveryJames Smart
The driver is unable to successfully login with remote device. During pt2pt login, the driver completes its FLOGI request with the remote device having WWN precedence. The remote device issues its own (delayed) FLOGI after accepting the driver's and, upon transmitting the FLOGI, immediately recognizes it has already processed the driver's FLOGI thus it transitions to sending a PLOGI before waiting for an ACC to its FLOGI. In the driver, the FLOGI is received and an ACC sent, followed by the PLOGI being received and an ACC sent. The issue is that the PLOGI reception occurs before the response from the adapter from the FLOGI ACC is received. Processing of the PLOGI sets state flags to perform the REG_RPI mailbox command and proceed with the rest of discovery on the port. The same completion routine used by both FLOGI and PLOGI is generic in nature. One of the things it does is clear flags, and those flags happen to drive the rest of discovery. So what happened was the PLOGI processing set the flags, the FLOGI ACC completion cleared them, thus when the PLOGI ACC completes it doesn't see the flags and stops. Fix by modifying the generic completion routine to not clear the rest of discovery flag (NLP_ACC_REGLOGIN) unless the completion is also associated with performing a mailbox command as part of its handling. For things such as FLOGI ACC, there isn't a subsequent action to perform with the adapter, thus there is no mailbox cmd ptr. PLOGI ACC though will perform REG_RPI upon completion, thus there is a mailbox cmd ptr. Link: https://lore.kernel.org/r/20200828175332.130300-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-31scsi: lpfc: Fix setting IRQ affinity with an empty CPU maskJames Smart
Some systems are reporting the following log message during driver unload or system shutdown: ics_rtas_set_affinity: No online cpus in the mask A prior commit introduced the writing of an empty affinity mask in calls to irq_set_affinity_hint() when disabling interrupts or when there are no remaining online CPUs to service an eq interrupt. At least some ppc64 systems are checking whether affinity masks are empty or not. Do not call irq_set_affinity_hint() with an empty CPU mask. Fixes: dcaa21367938 ("scsi: lpfc: Change default IRQ model on AMD architectures") Link: https://lore.kernel.org/r/20200828175332.130300-2-james.smart@broadcom.com Cc: <stable@vger.kernel.org> # v5.5+ Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-31scsi: qla2xxx: Fix regression on sparc64René Rebe
Commit 98aee70d19a7 ("qla2xxx: Add endianizer to max_payload_size modifier.") in 2014 broke qla2xxx on sparc64, e.g. as in the Sun Blade 1000 / 2000. Unbreak by partial revert to fix endianness in nvram firmware default initialization. Also mark the second frame_payload_size in nvram_t __le16 to avoid new sparse warnings. Link: https://lore.kernel.org/r/20200827.222729.1875148247374704975.rene@exactcode.com Fixes: 98aee70d19a7 ("qla2xxx: Add endianizer to max_payload_size modifier.") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Arun Easi <aeasi@marvell.com> Signed-off-by: René Rebe <rene@exactcode.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-31scsi: libfc: Fix for double free()Javed Hasan
Fix for '&fp->skb' double free. Link: https://lore.kernel.org/r/20200825093940.19612-1-jhasan@marvell.com Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-31scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abortDinghao Liu
When pm8001_tag_alloc() fails, task should be freed just like it is done in the subsequent error paths. Link: https://lore.kernel.org/r/20200823091453.4782-1-dinghao.liu@zju.edu.cn Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: esas2r: Remove unnecessary castsAlex Dewar
In a number of places in esas2r_ioctl.c, the void* returned from pci_alloc_consistent() is cast unnecessarily. Remove casts. Issue identified with Coccinelle. Link: https://lore.kernel.org/r/20200820181411.866057-1-alex.dewar90@gmail.com Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: csiostor: Fix wrong return value in csio_hw_prep_fw()Tianjia Zhang
On an error exit path, a negative error code should be returned instead of a positive return value. Link: https://lore.kernel.org/r/20200802111531.5065-1-tianjia.zhang@linux.alibaba.com Fixes: f40e74ffa3de ("csiostor:firmware upgrade fix") Cc: Praveen Madhavan <praveenm@chelsio.com> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: qla2xxx: Fix wrong return value in qla_nvme_register_hba()Tianjia Zhang
On an error exit path, a negative error code should be returned instead of a positive return value. Link: https://lore.kernel.org/r/20200802111530.5020-1-tianjia.zhang@linux.alibaba.com Fixes: 8777e4314d39 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine") Cc: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: qla2xxx: Fix wrong return value in qlt_chk_unresolv_exchg()Tianjia Zhang
In the case of a failed retry, a positive value EIO is returned here. I think this is a typo error. It is necessary to return an error value. [mkp: caller checks != 0 but the rest of the file uses -Exxx so fix this up to be consistent] Link: https://lore.kernel.org/r/20200802111528.4974-1-tianjia.zhang@linux.alibaba.com Fixes: 0691094ff3f2 ("scsi: qla2xxx: Add logic to detect ABTS hang and response completion") Cc: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: qla2xxx: Remove redundant variable initializationTianjia Zhang
The initialization value of `rc` is wrong. It is unnecessary to initialize `rc` variables, so remove its initialization operation. Link: https://lore.kernel.org/r/20200802111527.4928-1-tianjia.zhang@linux.alibaba.com Fixes: 84905dfe78d2 ("scsi: qla2xxx: Fix TMF and Multi-Queue config") Cc: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: aic7xxx: Fix error code handlingTong Zhang
ahc_linux_queue_recovery_cmd returns SUCCESS(0x2002) or FAIL(0x2003), but the caller is checking error case using != 0. Link: https://lore.kernel.org/r/20200816070242.978839-1-ztong0001@gmail.com Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: lpfc: Fix spelling mistake "Cant" -> "Can't"Colin Ian King
There is a spelling mistake in an error message. Fix it. Link: https://lore.kernel.org/r/20200810101238.61787-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: csiostor: Fix spelling mistake "couldnt" -> "couldn't"Colin Ian King
There are spelling mistakes in two comments and a csio_err error message. Fix these. Link: https://lore.kernel.org/r/20200810090843.49553-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: bnx2fc: Fix spelling mistake "couldnt" -> "couldn't"Colin Ian King
There are spelling mistakes in various printk messages. Fix these. Link: https://lore.kernel.org/r/20200810085057.49039-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: snic: Fix spelling mistakes of "Queueing"Colin Ian King
There are two different spelling mistakes of "Queueing" in error and debug messages. Fix these. Link: https://lore.kernel.org/r/20200810080745.47314-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: scsi_debug: Remove superfluous close zone in resp_open_zone()Niklas Cassel
resp_open_zone() always calls zbc_open_zone() with parameter explicit set to true. If zbc_open_zone() is called with parameter explicit set to true, and the current zone state is implicit open, it will call zbc_close_zone() on the zone before proceeding. Therefore, there is no need for resp_open_zone() to call zbc_close_zone() on an implicitly open zone before calling zbc_open_zone(). Remove superfluous close zone in resp_open_zone(). Link: https://lore.kernel.org/r/20200821130007.39938-1-niklas.cassel@wdc.com Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: libcxgbi: Fix a use after free in cxgbi_conn_xmit_pdu()Dan Carpenter
We accidentally move this logging printk after the free, but that leads to a use after free. Link: https://lore.kernel.org/r/20200824085933.GD208317@mwanda Fixes: e33c2482289b ("scsi: cxgb4i: Add support for iSCSI segmentation offload") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: qedf: Fix null ptr reference in qedf_stag_change_workYe Bin
Link: https://lore.kernel.org/r/20200824033436.45570-1-yebin10@huawei.com Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-10 15:16:50 +0000