summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2020-07-24scsi: ppa: Remove superfluous breaksLiao Pingfang
Remove superfluous breaks, as there is a "return" before them. Link: https://lore.kernel.org/r/1594724371-11677-1-git-send-email-wang.yi59@zte.com.cn Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: imm: Remove superfluous breaksLiao Pingfang
Remove superfluous breaks, as there is a "return" before them. Link: https://lore.kernel.org/r/1594724367-11593-1-git-send-email-wang.yi59@zte.com.cn Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: block: pm: Simplify resume handlingAlan Stern
Commit 05d18ae1cc8a ("scsi: pm: Balance pm_only counter of request queue during system resume") fixed a problem in the block layer's runtime-PM code: blk_set_runtime_active() failed to call blk_clear_pm_only(). However, the commit's implementation was awkward; it forced the SCSI system-resume handler to choose whether to call blk_post_runtime_resume() or blk_set_runtime_active(), depending on whether or not the SCSI device had previously been runtime suspended. This patch simplifies the situation considerably by adding the missing function call directly into blk_set_runtime_active() (under the condition that the queue is not already in the RPM_ACTIVE state). This allows the SCSI routine to revert back to its original form. Furthermore, making this change reveals that blk_post_runtime_resume() (in its success pathway) does exactly the same thing as blk_set_runtime_active(). The duplicate code is easily removed by making one routine call the other. No functional changes are intended. Link: https://lore.kernel.org/r/20200706151436.GA702867@rowland.harvard.edu CC: Can Guo <cang@codeaurora.org> CC: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: ufs-qcom: Add Inline Crypto Engine supportEric Biggers
Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom. The standards-compliant parts, such as querying the crypto capabilities and enabling crypto for individual UFS requests, are already handled by ufshcd-crypto.c, which itself is wired into the blk-crypto framework. However, ICE requires vendor-specific init, enable, and resume logic, and it requires that keys be programmed and evicted by vendor-specific SMC calls. Make the ufs-qcom driver handle these details. I tested this on Dragonboard 845c, which is a publicly available development board that uses the Snapdragon 845 SoC and runs the upstream Linux kernel. This is the same SoC used in the Pixel 3 and Pixel 3 XL phones. This testing included (among other things) verifying that the expected ciphertext was produced, both manually using ext4 encryption and automatically using a block layer self-test I've written. I've also tested that this driver works nearly as-is on the Snapdragon 765 and Snapdragon 865 SoCs. And others have tested it on Snapdragon 850, Snapdragon 855, and Snapdragon 865 (see the Tested-by tags). This is based very loosely on the vendor-provided driver in the kernel source code for the Pixel 3, but I've greatly simplified it. Also, for now I've only included support for major version 3 of ICE, since that's all I have the hardware to test with the mainline kernel. Plus it appears that version 3 is easier to use than older versions of ICE. For now, only allow using AES-256-XTS. The hardware also declares support for AES-128-XTS, AES-{128,256}-ECB, and AES-{128,256}-CBC (BitLocker variant). But none of these others are really useful, and they'd need to be individually tested to be sure they worked properly. This commit also changes the name of the loadable module from "ufs-qcom" to "ufs_qcom", as this is necessary to compile it from multiple source files (unless we were to rename ufs-qcom.c). Link: https://lore.kernel.org/r/20200710072013.177481-6-ebiggers@kernel.org Tested-by: Steev Klimaszewski <steev@kali.org> # Lenovo Yoga C630 Tested-by: Thara Gopinath <thara.gopinath@linaro.org> # db845c, sm8150-mtp, sm8250-mtp Reviewed-by: Avri Altman <avri.altman@wdc.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: ufs: Add program_key() variant opEric Biggers
On Snapdragon SoCs, the Linux kernel isn't permitted to directly access the standard UFS crypto configuration registers. Instead, programming and evicting keys must be done through vendor-specific SMC calls. To support this hardware, add a ->program_key() method to 'struct ufs_hba_variant_ops'. This allows overriding the UFS standard key programming / eviction procedure. Link: https://lore.kernel.org/r/20200710072013.177481-5-ebiggers@kernel.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: ufs-qcom: Name the dev_ref_clk_ctrl registersEric Biggers
In preparation for adding another optional register range to the ufs-qcom driver, name the existing optional register range "dev_ref_clk_ctrl_mem". This allows the driver to refer to the optional register ranges by name rather than index. No device-tree files actually have to be updated due to this change, since none of them actually declares these registers. Link: https://lore.kernel.org/r/20200710072013.177481-3-ebiggers@kernel.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: aic79xx: Restore modes when exiting ahd_linux_queue_abort_cmd()Hannes Reinecke
ahd_linux_queue_abort_cmd() calls ahd_save_modes() without calling ahd_restore_modes() before exiting. Link: https://lore.kernel.org/r/20200714160301.4482-1-hare@suse.de Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: megaraid_sas: Clear affinity hintTomas Henzl
To avoid a warning in free_irq, clear the affinity hint. Link: https://lore.kernel.org/r/20200709133144.8363-1-thenzl@redhat.com Fixes: f0b9e7bdc309 ("scsi: megaraid_sas: Set affinity for high IOPS reply queues") Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: hpsa: Bump versionDon Brace
Link: https://lore.kernel.org/r/159528198909.24772.9189002306398058371.stgit@brunhilda Reviewed-by: Gerry Morong <gerry.morong@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: hpsa: Increase controller error handling timeoutDon Brace
The controller can become slow to respond to SCSI INQUIRY requests resulting in the SCSI midlayer offlining the controller device. Increase the timeout value for commands sent to the controller device. Link: https://lore.kernel.org/r/159528198335.24772.7963614374905470122.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: hpsa: Increase queue depth for external LUNsDon Brace
Increase queue_depth for PTRAID devices to improve performance. Link: https://lore.kernel.org/r/159528197765.24772.15623281371636788406.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: hpsa: Correct rare oob conditionDon Brace
There are some rare conditions where a spare is first in the device list causing an array out-of-bounds condition. Link: https://lore.kernel.org/r/159528197176.24772.14659026352708896249.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: scsi_transport_sas: Add missing newline in sysfs 'enable' attributeXiongfeng Wang
Add newline when formatting SAS transport class phy 'enable' attribute. [root@localhost ~]# cat /sys/devices/pci0000:00/0000:00:0d.0/0000:0f:00.0/host3/phy-3:2/sas_phy/phy-3:2/enable 1[root@localhost ~]# Link: https://lore.kernel.org/r/1594975472-12486-1-git-send-email-wangxiongfeng2@huawei.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Bart van Assche <bvanassche@acm.org> Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: sd_zbc: Don't limit max_zone_append sectors to max_hw_sectorsJohannes Thumshirn
Don't clamp the maximum number of zone append sectors to the maximum number of hardware sectors in sd as the block layer is already enforcing this limit when setting max_zone_append_sectors. Link: https://lore.kernel.org/r/20200716091606.38316-1-johannes.thumshirn@wdc.com Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-20scsi: core: Run queue in case of I/O resource contention failureMing Lei
I/O requests may be held in scheduler queue because of resource contention. The starvation scenario was handled properly in the regular completion path but we failed to account for it during I/O submission. This lead to the hang captured below. Make sure we run the queue when resource contention is encountered in the submission path. [ 39.054963] scsi 13:0:0:0: rejecting I/O to dead device [ 39.058700] scsi 13:0:0:0: rejecting I/O to dead device [ 39.087855] sd 13:0:0:1: [sdd] Synchronizing SCSI cache [ 39.088909] scsi 13:0:0:1: rejecting I/O to dead device [ 39.095351] scsi 13:0:0:1: rejecting I/O to dead device [ 39.096962] scsi 13:0:0:1: rejecting I/O to dead device [ 247.021859] INFO: task scsi-stress-rem:813 blocked for more than 122 seconds. [ 247.023258] Not tainted 5.8.0-rc2 #8 [ 247.024069] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.025331] scsi-stress-rem D 0 813 802 0x00004000 [ 247.025334] Call Trace: [ 247.025354] __schedule+0x504/0x55f [ 247.027987] schedule+0x72/0xa8 [ 247.027991] blk_mq_freeze_queue_wait+0x63/0x8c [ 247.027994] ? do_wait_intr_irq+0x7a/0x7a [ 247.027996] blk_cleanup_queue+0x4b/0xc9 [ 247.028000] __scsi_remove_device+0xf6/0x14e [ 247.028002] scsi_remove_device+0x21/0x2b [ 247.029037] sdev_store_delete+0x58/0x7c [ 247.029041] kernfs_fop_write+0x10d/0x14f [ 247.031281] vfs_write+0xa2/0xdf [ 247.032670] ksys_write+0x6b/0xb3 [ 247.032673] do_syscall_64+0x56/0x82 [ 247.034053] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 247.034059] RIP: 0033:0x7f69f39e9008 [ 247.036330] Code: Bad RIP value. [ 247.036331] RSP: 002b:00007ffdd8116498 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 247.037613] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f69f39e9008 [ 247.039714] RDX: 0000000000000002 RSI: 000055cde92a0ab0 RDI: 0000000000000001 [ 247.039715] RBP: 000055cde92a0ab0 R08: 000000000000000a R09: 00007f69f3a79e80 [ 247.039716] R10: 000000000000000a R11: 0000000000000246 R12: 00007f69f3abb780 [ 247.039717] R13: 0000000000000002 R14: 00007f69f3ab6740 R15: 0000000000000002 Link: https://lore.kernel.org/r/20200720025435.812030-1-ming.lei@redhat.com Cc: linux-block@vger.kernel.org Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-20qed, qede, qedf: convert link mode from u32 to ETHTOOL_LINK_MODEAlexander Lobakin
Currently qed driver already ran out of 32 bits to store link modes, and this doesn't allow to add and support more speeds. Convert custom link mode to generic Ethtool bitmap and definitions (convenient Phylink shorthands are used for elegance and readability). This allowed us to drop all conversions/mappings between the driver and Ethtool. This involves changes in qede and qedf as well, as they used definitions from shared "qed_if.h". Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-15scsi: aic7xxx: Fix 'amount_xferred' set but not used issueLee Jones
'amount_xferred' is used, but only in certain circumstances. Place the same stipulations on the defining/allocating of 'amount_xferred' as is placed when using it. We've been careful not to change any of the ordering semantics here. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic7xxx/aic79xx_osm.c: In function ‘ahd_done’: drivers/scsi/aic7xxx/aic79xx_osm.c:1796:12: warning: variable ‘amount_xferred’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200713080001.128044-24-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aic7xxx: Remove unused variables 'wait' and 'paused'Lee Jones
It looks like they have never actually been used. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic7xxx/aic79xx_osm.c: In function ‘ahd_linux_dev_reset’: drivers/scsi/aic7xxx/aic79xx_osm.c:782:9: warning: variable ‘wait’ set but not used [-Wunused-but-set-variable] drivers/scsi/aic7xxx/aic79xx_osm.c:781:9: warning: variable ‘paused’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200713080001.128044-23-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aic7xxx: Remove unused variable 'ahd'Lee Jones
Hasn't been used since 2005. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic7xxx/aic79xx_osm.c: In function ‘ahd_linux_slave_configure’: drivers/scsi/aic7xxx/aic79xx_osm.c:703:20: warning: variable ‘ahd’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200713080001.128044-22-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: lpfc: Correct some pretty obvious misdocumentationLee Jones
Either due to API slippage before the driver was mainlined or copy/paste errors. Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_nvme.c:254: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_create_queue' drivers/scsi/lpfc/lpfc_nvme.c:254: warning: Function parameter or member 'qsize' not described in 'lpfc_nvme_create_queue' drivers/scsi/lpfc/lpfc_nvme.c:254: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_create_queue' drivers/scsi/lpfc/lpfc_nvme.c:311: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_delete_queue' drivers/scsi/lpfc/lpfc_nvme.c:311: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_delete_queue' drivers/scsi/lpfc/lpfc_nvme.c:689: warning: Function parameter or member 'gen_req_cmp' not described in '__lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Function parameter or member 'pnvme_lsreq' not described in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_ls_abort' drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_ls_abort' drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Function parameter or member 'pnvme_lsreq' not described in 'lpfc_nvme_ls_abort' drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_ls_abort' drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_ls_abort' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Function parameter or member 'phba' not described in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Function parameter or member 'pwqeIn' not described in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Function parameter or member 'wcqe' not described in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'lpfc_ncmd' not described in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'pnode' not described in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'cstat' not described in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'hw_queue_handle' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Function parameter or member 'lpfc_ncmd' not described in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'hw_queue_handle' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1598: warning: bad line: indicated in @lpfc_nvme_rport. drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Function parameter or member 'pnvme_fcreq' not described in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1856: warning: Function parameter or member 'abts_cmpl' not described in 'lpfc_nvme_abort_fcreq_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1856: warning: Excess function parameter 'rspiocb' description in 'lpfc_nvme_abort_fcreq_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Function parameter or member 'pnvme_fcreq' not described in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:2093: warning: Function parameter or member 'ndlp' not described in 'lpfc_get_nvme_buf' drivers/scsi/lpfc/lpfc_nvme.c:2093: warning: Function parameter or member 'idx' not described in 'lpfc_get_nvme_buf' drivers/scsi/lpfc/lpfc_nvme.c:2093: warning: Function parameter or member 'expedite' not described in 'lpfc_get_nvme_buf' drivers/scsi/lpfc/lpfc_nvme.c:2197: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_create_localport' drivers/scsi/lpfc/lpfc_nvme.c:2330: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_destroy_localport' drivers/scsi/lpfc/lpfc_nvme.c:2330: warning: Excess function parameter 'pnvme' description in 'lpfc_nvme_destroy_localport' drivers/scsi/lpfc/lpfc_nvme.c:2543: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_rescan_port' drivers/scsi/lpfc/lpfc_nvme.c:2543: warning: Function parameter or member 'ndlp' not described in 'lpfc_nvme_rescan_port' Link: https://lore.kernel.org/r/20200713080001.128044-21-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: be2iscsi: Add missing function parameter descriptionLee Jones
Also promote fully documented function header to kerneldoc. Fixes the following W=1 kernel build warning(s): drivers/scsi/be2iscsi/be_mgmt.c:112: warning: Function parameter or member 'phba' not described in 'mgmt_open_connection' Link: https://lore.kernel.org/r/20200713080001.128044-20-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: linux-drivers@broadcom.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: be2iscsi: Fix misdocumentation of 'pcontext'Lee Jones
Also demote unintentional kerneldoc header. Fixes the following W=1 kernel build warning(s): drivers/scsi/be2iscsi/be_main.c:986: warning: Function parameter or member 'pcontext' not described in 'alloc_wrb_handle' drivers/scsi/be2iscsi/be_main.c:986: warning: Excess function parameter 'pwrb_context' description in 'alloc_wrb_handle' drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'beiscsi_conn' not described in 'beiscsi_complete_pdu' drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'phdr' not described in 'beiscsi_complete_pdu' drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'pdata' not described in 'beiscsi_complete_pdu' drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'dlen' not described in 'beiscsi_complete_pdu' Link: https://lore.kernel.org/r/20200713080001.128044-19-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: linux-drivers@broadcom.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: be2iscsi: Fix API/documentation slipLee Jones
And add descriptions for a couple of missing function parameters. Fixes the following W=1 kernel build warning(s): drivers/scsi/be2iscsi/be_iscsi.c:38: warning: Function parameter or member 'ep' not described in 'beiscsi_session_create' drivers/scsi/be2iscsi/be_iscsi.c:173: warning: Function parameter or member 'is_leading' not described in 'beiscsi_conn_bind' drivers/scsi/be2iscsi/be_iscsi.c:998: warning: Function parameter or member 'beiscsi_ep' not described in 'beiscsi_free_ep' drivers/scsi/be2iscsi/be_iscsi.c:998: warning: Excess function parameter 'ep' description in 'beiscsi_free_ep' drivers/scsi/be2iscsi/be_iscsi.c:1039: warning: Function parameter or member 'non_blocking' not described in 'beiscsi_open_conn' drivers/scsi/be2iscsi/be_iscsi.c:1135: warning: Function parameter or member 'shost' not described in 'beiscsi_ep_connect' drivers/scsi/be2iscsi/be_iscsi.c:1135: warning: Excess function parameter 'scsi_host' description in 'beiscsi_ep_connect' drivers/scsi/be2iscsi/be_iscsi.c:1236: warning: Function parameter or member 'beiscsi_ep' not described in 'beiscsi_conn_close' drivers/scsi/be2iscsi/be_iscsi.c:1236: warning: Excess function parameter 'ep' description in 'beiscsi_conn_close' Link: https://lore.kernel.org/r/20200713080001.128044-18-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: linux-drivers@broadcom.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: myrs: Demote obvious misuse of kerneldoc to standard comment blocksLee Jones
No attempt has been made to document any of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/scsi/myrs.c:94: warning: Function parameter or member 'cmd_blk' not described in 'myrs_reset_cmd' drivers/scsi/myrs.c:105: warning: Function parameter or member 'cs' not described in 'myrs_qcmd' drivers/scsi/myrs.c:105: warning: Function parameter or member 'cmd_blk' not described in 'myrs_qcmd' drivers/scsi/myrs.c:130: warning: Function parameter or member 'cs' not described in 'myrs_exec_cmd' drivers/scsi/myrs.c:130: warning: Function parameter or member 'cmd_blk' not described in 'myrs_exec_cmd' drivers/scsi/myrs.c:149: warning: Function parameter or member 'cs' not described in 'myrs_report_progress' drivers/scsi/myrs.c:149: warning: Function parameter or member 'ldev_num' not described in 'myrs_report_progress' drivers/scsi/myrs.c:149: warning: Function parameter or member 'msg' not described in 'myrs_report_progress' drivers/scsi/myrs.c:149: warning: Function parameter or member 'blocks' not described in 'myrs_report_progress' drivers/scsi/myrs.c:149: warning: Function parameter or member 'size' not described in 'myrs_report_progress' drivers/scsi/myrs.c:160: warning: Function parameter or member 'cs' not described in 'myrs_get_ctlr_info' drivers/scsi/myrs.c:222: warning: Function parameter or member 'cs' not described in 'myrs_get_ldev_info' drivers/scsi/myrs.c:222: warning: Function parameter or member 'ldev_num' not described in 'myrs_get_ldev_info' drivers/scsi/myrs.c:222: warning: Function parameter or member 'ldev_info' not described in 'myrs_get_ldev_info' drivers/scsi/myrs.c:310: warning: Function parameter or member 'cs' not described in 'myrs_get_pdev_info' drivers/scsi/myrs.c:310: warning: Function parameter or member 'channel' not described in 'myrs_get_pdev_info' drivers/scsi/myrs.c:310: warning: Function parameter or member 'target' not described in 'myrs_get_pdev_info' drivers/scsi/myrs.c:310: warning: Function parameter or member 'lun' not described in 'myrs_get_pdev_info' drivers/scsi/myrs.c:310: warning: Function parameter or member 'pdev_info' not described in 'myrs_get_pdev_info' drivers/scsi/myrs.c:353: warning: Function parameter or member 'cs' not described in 'myrs_dev_op' drivers/scsi/myrs.c:353: warning: Function parameter or member 'opcode' not described in 'myrs_dev_op' drivers/scsi/myrs.c:353: warning: Function parameter or member 'opdev' not described in 'myrs_dev_op' drivers/scsi/myrs.c:379: warning: Function parameter or member 'cs' not described in 'myrs_translate_pdev' drivers/scsi/myrs.c:379: warning: Function parameter or member 'channel' not described in 'myrs_translate_pdev' drivers/scsi/myrs.c:379: warning: Function parameter or member 'target' not described in 'myrs_translate_pdev' drivers/scsi/myrs.c:379: warning: Function parameter or member 'lun' not described in 'myrs_translate_pdev' drivers/scsi/myrs.c:379: warning: Function parameter or member 'devmap' not described in 'myrs_translate_pdev' drivers/scsi/myrs.c:422: warning: Function parameter or member 'cs' not described in 'myrs_get_event' drivers/scsi/myrs.c:422: warning: Function parameter or member 'event_num' not described in 'myrs_get_event' drivers/scsi/myrs.c:422: warning: Function parameter or member 'event_buf' not described in 'myrs_get_event' drivers/scsi/myrs.c:484: warning: Function parameter or member 'cs' not described in 'myrs_enable_mmio_mbox' drivers/scsi/myrs.c:484: warning: Function parameter or member 'enable_mbox_fn' not described in 'myrs_enable_mmio_mbox' drivers/scsi/myrs.c:584: warning: Function parameter or member 'cs' not described in 'myrs_get_config' drivers/scsi/myrs.c:688: warning: cannot understand function prototype: 'struct ' drivers/scsi/myrs.c:1967: warning: Function parameter or member 'dev' not described in 'myrs_is_raid' drivers/scsi/myrs.c:1980: warning: Function parameter or member 'dev' not described in 'myrs_get_resync' drivers/scsi/myrs.c:2005: warning: Function parameter or member 'dev' not described in 'myrs_get_state' drivers/scsi/myrs.c:2343: warning: bad line: the Error Status Register when the driver performs the BIOS handshaking. drivers/scsi/myrs.c:2344: warning: bad line: It returns true for fatal errors and false otherwise. drivers/scsi/myrs.c:2349: warning: Function parameter or member 'cs' not described in 'myrs_err_status' drivers/scsi/myrs.c:2349: warning: Function parameter or member 'status' not described in 'myrs_err_status' drivers/scsi/myrs.c:2349: warning: Function parameter or member 'parm0' not described in 'myrs_err_status' drivers/scsi/myrs.c:2349: warning: Function parameter or member 'parm1' not described in 'myrs_err_status' Link: https://lore.kernel.org/r/20200713080001.128044-16-lee.jones@linaro.org Cc: Hannes Reinecke <hare@kernel.org> Cc: Linux GmbH <hare@suse.com> Cc: "Leonard N. Zubkoff" <lnz@dandelion.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: ipr: Fix struct packed-not-aligned issuesLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/ipr.h:1687:1: warning: alignment 1 of ‘struct ipr_dump_location_entry’ is less than 4 [-Wpacked-not-aligned] 1687 | }__attribute__((packed)); | ^ drivers/scsi/ipr.h:1711:1: warning: alignment 1 of ‘struct ipr_driver_dump’ is less than 4 [-Wpacked-not-aligned] 1711 | }__attribute__((packed)); | ^ Link: https://lore.kernel.org/r/20200713080001.128044-15-lee.jones@linaro.org Cc: Brian King <brking@us.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: ipr: Remove a bunch of set but checked variablesLee Jones
Fixes the following W=1 kernel build warning(s): In file included from drivers/scsi/ipr.c:73: drivers/scsi/ipr.c: In function ‘ipr_mask_and_clear_interrupts’: drivers/scsi/ipr.c:740:15: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_cancel_op’: drivers/scsi/ipr.c:5497:13: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_iopoll’: drivers/scsi/ipr.c:5765:22: warning: variable ‘ioa_cfg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_reset_restore_cfg_space’: drivers/scsi/ipr.c:8662:6: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_test_msi’: Link: https://lore.kernel.org/r/20200713080001.128044-14-lee.jones@linaro.org Cc: Brian King <brking@us.ibm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: virtio_scsi: Demote seemingly unintentional kerneldoc headerLee Jones
This is the only use of kerneldoc in the sourcefile and no descriptions are provided. Fixes the following W=1 kernel build warning(s): drivers/scsi/virtio_scsi.c:109: warning: Function parameter or member 'vscsi' not described in 'virtscsi_complete_cmd' drivers/scsi/virtio_scsi.c:109: warning: Function parameter or member 'buf' not described in 'virtscsi_complete_cmd' Link: https://lore.kernel.org/r/20200713080001.128044-13-lee.jones@linaro.org Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: virtualization@lists.linux-foundation.org Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: ipr: Fix a mountain of kerneldoc misdemeanoursLee Jones
Mainly misspellings and/or missing function parameter descriptions. Fixes the following W=1 kernel build warning(s): drivers/scsi/ipr.c:10100:15: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c:679: warning: Function parameter or member 'fast_done' not described in 'ipr_init_ipr_cmnd' drivers/scsi/ipr.c:697: warning: Function parameter or member 'hrrq' not described in '__ipr_get_free_ipr_cmnd' drivers/scsi/ipr.c:697: warning: Excess function parameter 'ioa_cfg' description in '__ipr_get_free_ipr_cmnd' drivers/scsi/ipr.c:1297: warning: Function parameter or member 'buffer' not described in '__ipr_format_res_path' drivers/scsi/ipr.c:1297: warning: Excess function parameter 'buf' description in '__ipr_format_res_path' drivers/scsi/ipr.c:1321: warning: Function parameter or member 'buffer' not described in 'ipr_format_res_path' drivers/scsi/ipr.c:1321: warning: Excess function parameter 'buf' description in 'ipr_format_res_path' drivers/scsi/ipr.c:1400: warning: Excess function parameter 'cfgtew' description in 'ipr_clear_res_target' drivers/scsi/ipr.c:2679: warning: Function parameter or member 't' not described in 'ipr_timeout' drivers/scsi/ipr.c:2679: warning: Excess function parameter 'ipr_cmd' description in 'ipr_timeout' drivers/scsi/ipr.c:2712: warning: Function parameter or member 't' not described in 'ipr_oper_timeout' drivers/scsi/ipr.c:2712: warning: Excess function parameter 'ipr_cmd' description in 'ipr_oper_timeout' drivers/scsi/ipr.c:3494: warning: Function parameter or member 'attr' not described in 'ipr_show_fw_version' drivers/scsi/ipr.c:3528: warning: Function parameter or member 'attr' not described in 'ipr_show_log_level' drivers/scsi/ipr.c:3551: warning: Function parameter or member 'attr' not described in 'ipr_store_log_level' drivers/scsi/ipr.c:3551: warning: Function parameter or member 'count' not described in 'ipr_store_log_level' drivers/scsi/ipr.c:3586: warning: Function parameter or member 'attr' not described in 'ipr_store_diagnostics' drivers/scsi/ipr.c:3642: warning: Function parameter or member 'dev' not described in 'ipr_show_adapter_state' drivers/scsi/ipr.c:3642: warning: Function parameter or member 'attr' not described in 'ipr_show_adapter_state' drivers/scsi/ipr.c:3642: warning: Excess function parameter 'class_dev' description in 'ipr_show_adapter_state' drivers/scsi/ipr.c:3671: warning: Function parameter or member 'attr' not described in 'ipr_store_adapter_state' drivers/scsi/ipr.c:3722: warning: Function parameter or member 'attr' not described in 'ipr_store_reset_adapter' drivers/scsi/ipr.c:3783: warning: Function parameter or member 'attr' not described in 'ipr_store_iopoll_weight' drivers/scsi/ipr.c:3783: warning: Function parameter or member 'count' not described in 'ipr_store_iopoll_weight' drivers/scsi/ipr.c:3883: warning: Function parameter or member 'sglist' not described in 'ipr_free_ucode_buffer' drivers/scsi/ipr.c:3883: warning: Excess function parameter 'p_dnld' description in 'ipr_free_ucode_buffer' drivers/scsi/ipr.c:4074: warning: Function parameter or member 'dev' not described in 'ipr_store_update_fw' drivers/scsi/ipr.c:4074: warning: Function parameter or member 'attr' not described in 'ipr_store_update_fw' drivers/scsi/ipr.c:4074: warning: Excess function parameter 'class_dev' description in 'ipr_store_update_fw' drivers/scsi/ipr.c:4149: warning: Function parameter or member 'attr' not described in 'ipr_show_fw_type' drivers/scsi/ipr.c:4489: warning: Excess function parameter 'reason' description in 'ipr_change_queue_depth' drivers/scsi/ipr.c:4660: warning: Function parameter or member 'attr' not described in 'ipr_show_raw_mode' drivers/scsi/ipr.c:4688: warning: Function parameter or member 'attr' not described in 'ipr_store_raw_mode' drivers/scsi/ipr.c:4688: warning: Function parameter or member 'count' not described in 'ipr_store_raw_mode' drivers/scsi/ipr.c:5069: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_cmnd_is_free' drivers/scsi/ipr.c:5108: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_wait_for_ops' drivers/scsi/ipr.c:5108: warning: Excess function parameter 'ipr_cmd' description in 'ipr_wait_for_ops' drivers/scsi/ipr.c:5272: warning: Function parameter or member 'deadline' not described in 'ipr_sata_reset' drivers/scsi/ipr.c:5453: warning: Function parameter or member 't' not described in 'ipr_abort_timeout' drivers/scsi/ipr.c:5453: warning: Excess function parameter 'ipr_cmd' description in 'ipr_abort_timeout' drivers/scsi/ipr.c:5578: warning: Function parameter or member 'shost' not described in 'ipr_scan_finished' drivers/scsi/ipr.c:5578: warning: Function parameter or member 'elapsed_time' not described in 'ipr_scan_finished' drivers/scsi/ipr.c:5578: warning: Excess function parameter 'scsi_cmd' description in 'ipr_scan_finished' drivers/scsi/ipr.c:5704: warning: Function parameter or member 'number' not described in 'ipr_isr_eh' drivers/scsi/ipr.c:6278: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_gen_sense' drivers/scsi/ipr.c:6278: warning: Excess function parameter 'ioasa' description in 'ipr_gen_sense' drivers/scsi/ipr.c:6278: warning: Excess function parameter 'sense_buf' description in 'ipr_gen_sense' drivers/scsi/ipr.c:6711: warning: Function parameter or member 'host' not described in 'ipr_ioa_info' drivers/scsi/ipr.c:6711: warning: Excess function parameter 'scsi_host' description in 'ipr_ioa_info' drivers/scsi/ipr.c:7606: warning: Function parameter or member 'res_handle' not described in 'ipr_build_mode_sense' drivers/scsi/ipr.c:7606: warning: Excess function parameter 'res' description in 'ipr_build_mode_sense' drivers/scsi/ipr.c:7947: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_ioafp_set_caching_parameters' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'flags' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'page' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'dma_addr' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'xfer_len' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:8280: warning: Function parameter or member 't' not described in 'ipr_reset_timer_done' drivers/scsi/ipr.c:8280: warning: Excess function parameter 'ipr_cmd' description in 'ipr_reset_timer_done' drivers/scsi/ipr.c:9486: warning: bad line: drivers/scsi/ipr.c:9609: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_free_all_resources' drivers/scsi/ipr.c:9609: warning: Excess function parameter 'ipr_cmd' description in 'ipr_free_all_resources' drivers/scsi/ipr.c:10071: warning: Function parameter or member 'irq' not described in 'ipr_test_intr' drivers/scsi/ipr.c:10071: warning: Function parameter or member 'devp' not described in 'ipr_test_intr' drivers/scsi/ipr.c:10071: warning: Excess function parameter 'pdev' description in 'ipr_test_intr' drivers/scsi/ipr.c:10098: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_test_msi' drivers/scsi/ipr.c:10538: warning: Function parameter or member 'pdev' not described in 'ipr_probe' drivers/scsi/ipr.c:10538: warning: Function parameter or member 'dev_id' not described in 'ipr_probe' drivers/scsi/ipr.c:10794: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_halt_done' drivers/scsi/ipr.c:10805: warning: Function parameter or member 'nb' not described in 'ipr_halt' drivers/scsi/ipr.c:10805: warning: Function parameter or member 'event' not described in 'ipr_halt' drivers/scsi/ipr.c:10805: warning: Function parameter or member 'buf' not described in 'ipr_halt' Link: https://lore.kernel.org/r/20200713080001.128044-12-lee.jones@linaro.org Cc: Brian King <brking@us.ibm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: pm8001: Provide descriptions for the many undocumented 'attr'sLee Jones
... even if they are completely unused. Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_ctl.c:56: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_mpi_interface_rev_show' drivers/scsi/pm8001/pm8001_ctl.c:81: warning: Function parameter or member 'attr' not described in 'controller_fatal_error_show' drivers/scsi/pm8001/pm8001_ctl.c:100: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_fw_version_show' drivers/scsi/pm8001/pm8001_ctl.c:130: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ila_version_show' drivers/scsi/pm8001/pm8001_ctl.c:155: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_inactive_fw_version_show' drivers/scsi/pm8001/pm8001_ctl.c:181: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_max_out_io_show' drivers/scsi/pm8001/pm8001_ctl.c:204: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_max_devices_show' drivers/scsi/pm8001/pm8001_ctl.c:230: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_max_sg_list_show' drivers/scsi/pm8001/pm8001_ctl.c:274: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_sas_spec_support_show' drivers/scsi/pm8001/pm8001_ctl.c:303: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_host_sas_address_show' drivers/scsi/pm8001/pm8001_ctl.c:322: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_logging_level_show' drivers/scsi/pm8001/pm8001_ctl.c:355: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_aap_log_show' drivers/scsi/pm8001/pm8001_ctl.c:390: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ib_queue_log_show' drivers/scsi/pm8001/pm8001_ctl.c:423: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ob_queue_log_show' drivers/scsi/pm8001/pm8001_ctl.c:454: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_bios_version_show' drivers/scsi/pm8001/pm8001_ctl.c:492: warning: Function parameter or member 'attr' not described in 'event_log_size_show' drivers/scsi/pm8001/pm8001_ctl.c:510: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_iop_log_show' drivers/scsi/pm8001/pm8001_ctl.c:548: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_fatal_log_show' drivers/scsi/pm8001/pm8001_ctl.c:566: warning: Function parameter or member 'attr' not described in 'non_fatal_log_show' drivers/scsi/pm8001/pm8001_ctl.c:609: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_gsm_log_show' Link: https://lore.kernel.org/r/20200713080001.128044-11-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Fill in the very parameter descriptions for rx_sync_cmd()Lee Jones
... and document aac_rx_ioremap() 'dev' param. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p2' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p3' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p4' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p5' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p6' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'status' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r1' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r2' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r3' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r4' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Excess function parameter 'ret' description in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:450: warning: Function parameter or member 'dev' not described in 'aac_rx_ioremap' Link: https://lore.kernel.org/r/20200713080001.128044-10-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aic94xx: Fix a couple of formatting and bitrot issuesLee Jones
Kerneldoc format should be '@.*: ', else the checker gets confused. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic94xx/aic94xx_scb.c:137: warning: Function parameter or member 'phy' not described in 'asd_get_attached_sas_addr' drivers/scsi/aic94xx/aic94xx_scb.c:137: warning: Function parameter or member 'sas_addr' not described in 'asd_get_attached_sas_addr' drivers/scsi/aic94xx/aic94xx_scb.c:860: warning: Function parameter or member 't' not described in 'asd_ascb_timedout' drivers/scsi/aic94xx/aic94xx_scb.c:860: warning: Excess function parameter 'data' description in 'asd_ascb_timedout' Link: https://lore.kernel.org/r/20200713080001.128044-9-lee.jones@linaro.org Cc: Luben Tuikov <luben_tuikov@adaptec.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Fix a bunch of function header issuesLee Jones
Some parameters not documented. Others misspelled. Also, functions must follow directly after the header that documents them. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/commsup.c:223: warning: Function parameter or member 'scmd' not described in 'aac_fib_alloc_tag' drivers/scsi/aacraid/commsup.c:421: warning: Function parameter or member 'qid' not described in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:421: warning: Function parameter or member 'hw_fib' not described in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:421: warning: Excess function parameter 'priority' description in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:421: warning: Excess function parameter 'fib' description in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:943: warning: Function parameter or member 'fibptr' not described in 'aac_fib_complete' drivers/scsi/aacraid/commsup.c:943: warning: Excess function parameter 'fib' description in 'aac_fib_complete' drivers/scsi/aacraid/commsup.c:1061: warning: Excess function parameter 'dev' description in 'AIF_SNIFF_TIMEOUT' drivers/scsi/aacraid/commsup.c:1061: warning: Excess function parameter 'fibptr' description in 'AIF_SNIFF_TIMEOUT' drivers/scsi/aacraid/commsup.c:2428: warning: Function parameter or member 'data' not described in 'aac_command_thread' drivers/scsi/aacraid/commsup.c:2428: warning: Excess function parameter 'dev' description in 'aac_command_thread' Link: https://lore.kernel.org/r/20200713080001.128044-8-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aic94xx: Document 'lseq' and repair asd_update_port_links() headerLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/aic94xx/aic94xx_seq.c:587: warning: Function parameter or member 'lseq' not described in 'asd_init_lseq_mip' drivers/scsi/aic94xx/aic94xx_seq.c:674: warning: Function parameter or member 'lseq' not described in 'asd_init_lseq_mdp' drivers/scsi/aic94xx/aic94xx_seq.c:958: warning: Function parameter or member 'lseq' not described in 'asd_init_lseq_cio' drivers/scsi/aic94xx/aic94xx_seq.c:1364: warning: Function parameter or member 'asd_ha' not described in 'asd_update_port_links' drivers/scsi/aic94xx/aic94xx_seq.c:1364: warning: Function parameter or member 'phy' not described in 'asd_update_port_links' drivers/scsi/aic94xx/aic94xx_seq.c:1364: warning: Excess function parameter 'sas_phy' description in 'asd_update_port_links' Link: https://lore.kernel.org/r/20200713080001.128044-7-lee.jones@linaro.org Cc: Luben Tuikov <luben_tuikov@adaptec.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Demote partially documented function headerLee Jones
This should be populated by someone who knows the meaning of all the params. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/dpcsup.c:272: warning: Function parameter or member 'isAif' not described in 'aac_intr_normal' drivers/scsi/aacraid/dpcsup.c:272: warning: Function parameter or member 'isFastResponse' not described in 'aac_intr_normal' drivers/scsi/aacraid/dpcsup.c:272: warning: Function parameter or member 'aif_fib' not described in 'aac_intr_normal' Link: https://lore.kernel.org/r/20200713080001.128044-6-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Remove unused variable 'status'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/dpcsup.c: In function ‘aac_aif_callback’: drivers/scsi/aacraid/dpcsup.c:232:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] 232 | int status; | ^~~~~~ Link: https://lore.kernel.org/r/20200713080001.128044-5-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Fix logical bug when !DBGLee Jones
When DBG is not enabled FIB_COUNTER_INCREMENT() results in an empty statement, leaving the contents of if() and else() empty. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/dpcsup.c: In function ‘aac_response_normal’: drivers/scsi/aacraid/dpcsup.c:105:50: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 105 | FIB_COUNTER_INCREMENT(aac_config.AsyncRecved); | ^ drivers/scsi/aacraid/dpcsup.c: In function ‘aac_intr_normal’: drivers/scsi/aacraid/dpcsup.c:411:30: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 411 | aac_config.AsyncRecved); | ^ Link: https://lore.kernel.org/r/20200713080001.128044-4-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Fix a few kerneldoc issuesLee Jones
Functions must follow imediately after the header documenting them and all parameters must be present. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/commctrl.c:43: warning: Excess function parameter 'dev' description in 'AAC_DEBUG_PREAMBLE' drivers/scsi/aacraid/commctrl.c:43: warning: Excess function parameter 'arg' description in 'AAC_DEBUG_PREAMBLE' drivers/scsi/aacraid/commctrl.c:167: warning: Function parameter or member 'dev' not described in 'open_getadapter_fib' drivers/scsi/aacraid/commctrl.c:167: warning: Function parameter or member 'arg' not described in 'open_getadapter_fib' drivers/scsi/aacraid/commctrl.c:458: warning: Cannot understand * on line 458 - I thought it was a doc line Link: https://lore.kernel.org/r/20200713080001.128044-3-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Repair two kerneldoc headersLee Jones
The function headers for aac_get_config_status() and aac_get_containers() have suffered bitrot where the documentation hasn't kept up with the API. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'dev' not described in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'commit_flag' not described in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:358: warning: Excess function parameter 'common' description in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:450: warning: Function parameter or member 'dev' not described in 'aac_get_containers' drivers/scsi/aacraid/aachba.c:450: warning: Excess function parameter 'common' description in 'aac_get_containers' Link: https://lore.kernel.org/r/20200713080001.128044-2-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15block: add max_active_zones to blk-sysfsNiklas Cassel
Add a new max_active zones definition in the sysfs documentation. This definition will be common for all devices utilizing the zoned block device support in the kernel. Export max_active_zones according to this new definition for NVMe Zoned Namespace devices, ZAC ATA devices (which are treated as SCSI devices by the kernel), and ZBC SCSI devices. Add the new max_active_zones member to struct request_queue, rather than as a queue limit, since this property cannot be split across stacking drivers. For SCSI devices, even though max active zones is not part of the ZBC/ZAC spec, export max_active_zones as 0, signifying "no limit". Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-15block: add max_open_zones to blk-sysfsNiklas Cassel
Add a new max_open_zones definition in the sysfs documentation. This definition will be common for all devices utilizing the zoned block device support in the kernel. Export max open zones according to this new definition for NVMe Zoned Namespace devices, ZAC ATA devices (which are treated as SCSI devices by the kernel), and ZBC SCSI devices. Add the new max_open_zones member to struct request_queue, rather than as a queue limit, since this property cannot be split across stacking drivers. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-15scsi: megaraid_sas: Remove undefined ENABLE_IRQ_POLL macroChandrakanth Patil
As the ENABLE_IRQ_POLL macro is undefined, the check for ENABLE_IRQ_POLL macro in ISR will always be false. This leads to irq polling being non-functional. Remove ENABLE_IRQ_POLL check from ISR. Link: https://lore.kernel.org/r/20200715120153.20512-1-chandrakanth.patil@broadcom.com Fixes: a6ffd5bf6819 ("scsi: megaraid_sas: Call disable_irq from process IRQ") Cc: <stable@vger.kernel.org> # v5.3+ Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: qla2xxx: Address a set of sparse warningsShyam Sundar
Fix the following sparse warnings: drivers/scsi/qla2xxx/qla_isr.c:881:23: warning: restricted __le16 degrades to integer drivers/scsi/qla2xxx/qla_isr.c:881:23: warning: cast to restricted __le16 Link: https://lore.kernel.org/r/20200715043358.21668-1-njavali@marvell.com Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: sd_zbc: Remove unused inline functionsYueHaibing
These are no longer used and can be removed. Link: https://lore.kernel.org/r/20200715025523.34620-1-yuehaibing@huawei.com Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: lpfc: NVMe remote port devloss_tmo from llddJames Smart
nvme-fc allows the driver to specify a default devloss_tmo value when registering the remote port. The lpfc driver is currently not doing so, although it is implementing a driver internal node loss value of 30s which also is used on the SCSI FC remote port. As no devloss_tmo is set, the nvme-fc transport defaults to 60s. So there are competing timers. Additionally, due to the competing timers, it is possible the NVMe rport is removed but the SCSI rport remains. It is possible that the SCSI FC rport, which was registered for the NVMe port even if it doesn't utilize the SCSI protocol, had been tuned to not match either the 60s (nvme-fc default) or 30s (lldd default), it gets out of whack. The lldd will defer to the SCSI FC rport as long as the SCSI FC rport has not had its devloss_tmo expire. Correct the situation by specifying a default devloss_tmo to the nvme-fc transport when registering the rport. Take the value from the SCSI FC rport if it exists, otherwise use the driver default. Link: https://lore.kernel.org/r/20200714211412.11773-1-jsmart2021@gmail.com Tested-by: Martin George <Martin.George@netapp.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: cxgb4i: Remove an unnecessary NULL check for 'cconn' pointerVarun Prakash
'cconn' will never be NULL in cxgbi_conn_alloc_pdu() so remove NULL check. Link: https://lore.kernel.org/r/1594741751-3323-1-git-send-email-varun@chelsio.com Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: lpfc: Quieten some printksAnton Blanchard
On a big box the lpfc driver emits a few thousand "Set Affinity" lines to the console. Reduce the priority of these from KERN_ERR to KERN_INFO, and also fix a few printks that had no log level. Link: https://lore.kernel.org/r/20200713083908.1104927-1-anton@ozlabs.org Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Anton Blanchard <anton@ozlabs.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: qla4xxx: Provide a missing function param description and fix formattingLee Jones
Kerneldoc function parameter references need to be in the format '@.*: ', else the kerneldoc checker gets confused. Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_init.c: In function ‘ql4xxx_set_mac_number’: drivers/scsi/qla4xxx/ql4_init.c:17:10: warning: variable ‘func_number’ set but not used [-Wunused-but-set-variable] drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’: drivers/scsi/qla4xxx/ql4_init.c:664:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] from drivers/scsi/qla4xxx/ql4_init.c:9: from drivers/scsi/qla4xxx/ql4_init.c:9: drivers/scsi/qla4xxx/ql4_init.c:953: warning: Function parameter or member 'is_reset' not described in 'qla4xxx_initialize_adapter' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'ha' not described in 'qla4xxx_process_ddb_changed' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'fw_ddb_index' not described in 'qla4xxx_process_ddb_changed' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'state' not described in 'qla4xxx_process_ddb_changed' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'conn_err' not described in 'qla4xxx_process_ddb_changed' Link: https://lore.kernel.org/r/20200713074645.126138-30-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Fix a bunch of function doc formatting errorsLee Jones
And a few missing/excessive parameter descriptions. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'dev' not described in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'commit_flag' not described in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:358: warning: Excess function parameter 'common' description in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:450: warning: Function parameter or member 'dev' not described in 'aac_get_containers' drivers/scsi/aacraid/aachba.c:450: warning: Excess function parameter 'common' description in 'aac_get_containers' drivers/scsi/aacraid/aachba.c:568: warning: Function parameter or member 'scsicmd' not described in 'aac_get_container_name' drivers/scsi/aacraid/aachba.c:796: warning: Function parameter or member 'scsicmd' not described in 'aac_probe_container_callback1' drivers/scsi/aacraid/aachba.c:796: warning: Excess function parameter 'dev' description in 'aac_probe_container_callback1' drivers/scsi/aacraid/aachba.c:796: warning: Excess function parameter 'cid' description in 'aac_probe_container_callback1' drivers/scsi/aacraid/aachba.c:1105: warning: Function parameter or member 'scsicmd' not described in 'aac_get_container_serial' drivers/scsi/aacraid/aachba.c:1961: warning: Excess function parameter 'phys_luns' description in 'aac_set_safw_attr_all_targets' drivers/scsi/aacraid/aachba.c:1961: warning: Excess function parameter 'rescan' description in 'aac_set_safw_attr_all_targets' drivers/scsi/aacraid/aachba.c:3394: warning: Cannot understand * on line 3394 - I thought it was a doc line drivers/scsi/aacraid/aachba.c:3687: warning: Cannot understand * on line 3687 - I thought it was a doc line drivers/scsi/aacraid/aachba.c:3752: warning: Cannot understand * on line 3752 - I thought it was a doc line drivers/scsi/aacraid/aachba.c:3795: warning: Cannot understand * on line 3795 - I thought it was a doc line Link: https://lore.kernel.org/r/20200713074645.126138-29-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aic94xx: Repair kerneldoc formatting error and remove extra paramLee Jones
Function parameters need to be documented with format '@.*: '. 'to' is not longer asd_start_timers()'s function parameter. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic94xx/aic94xx_hwi.c:589: warning: Function parameter or member 'asd_ha' not described in 'asd_init_ctxmem' drivers/scsi/aic94xx/aic94xx_hwi.c:1157: warning: Excess function parameter 'to' description in 'asd_start_scb_timers' Link: https://lore.kernel.org/r/20200713074645.126138-28-lee.jones@linaro.org Cc: Luben Tuikov <luben_tuikov@adaptec.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-11 14:47:23 +0000