summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2020-05-04scsi: scsi_debug: Re-arrange parameters alphabeticallyDouglas Gilbert
This module has a lot of parameters and when searching for one, the author prefers them in alphabetical order. This can lead to somewhat illogical ordering (e.g. inq_product before inq_vendor). However it is not clear what another sensible total logical ordering would be. Link: https://lore.kernel.org/r/20200421151424.32668-8-dgilbert@interlog.com Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-04scsi: scsi_debug: Implement PRE-FETCH commandsDouglas Gilbert
Many disks implement the SCSI PRE-FETCH commands. One use case might be a disk-to-disk compare, say between disks A and B. Then this sequence of commands might be used: PRE-FETCH(from B, IMMED), READ(from A), VERIFY (BYTCHK=1 on B with data returned from READ). The PRE-FETCH (which returns quickly due to the IMMED) fetches the data from the media into B's cache which should speed the trailing VERIFY command. The next chunk of the compare might be done in parallel, with A and B reversed. The implementation tries to bring the specified range in main memory into the cache(s) associated with this machine's CPU(s) using the prefetch_range() function. Link: https://lore.kernel.org/r/20200421151424.32668-7-dgilbert@interlog.com Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-04scsi: scsi_debug: Improve command duration calculationDouglas Gilbert
Previously the code did the work implied by the given SCSI command and after that it waited for a timer based on the user specified command duration to be exhausted before informing the mid-level that the command was complete. For short command durations, the time to complete the work implied by the SCSI command could be significant compared to the user specified command duration. For example a WRITE of 128 blocks (say 512 bytes each) on a machine that can copy from main memory to main memory at a rate of 10 GB/sec will take around 6.4 microseconds to do that copy. If the user specified a command duration of 5 microseconds (ndelay=5000), should the driver do a further delay of 5 microseconds after the copy or return immediately because 6.4 > 5 ? The action prior to this patch was to always do the timer based delay. After this patch, for ndelay values less than 1 millisecond, this driver will complete the command immediately. And in the case where the user specified delay was 7 microseconds, a timer delay of 600 nanoseconds will be set ((7 - 6.4) * 1000). Link: https://lore.kernel.org/r/20200421151424.32668-6-dgilbert@interlog.com Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-04scsi: scsi_debug: Weaken rwlock around ramdisk accessDouglas Gilbert
The design of this driver is to do any ramdisk access on the same thread that invoked the queuecommand() call. That is assumed to be user space context. The command duration is implemented by setting the delay with a high resolution timer. The hr timer's callback may well be in interrupt context, but it doesn't touch the ramdisk. So try removing the _irqsave()/_irqrestore() portion on the read-write lock that protects ramdisk access. Link: https://lore.kernel.org/r/20200421151424.32668-5-dgilbert@interlog.com Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-04scsi: scsi_debug: Implement VERIFY(10), add VERIFY(16)Douglas Gilbert
With the addition of the per_host_store option, the ability to check whether two different ramdisk images are the same or not becomes practical. Prior to this patch VERIFY(10) always returned true (i.e. the SCSI GOOD status) without checking. This option adds support for BYTCHK equal to 0, 1 and 3. If the comparison fails, then a sense key of MISCOMPARE is returned as per the T10 standards. Also add support for the VERIFY(16) command. Link: https://lore.kernel.org/r/20200421151424.32668-4-dgilbert@interlog.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-04scsi: scsi_debug: Add per_host_store optionDouglas Gilbert
The scsi_debug driver has always been restricted to using one ramdisk image (or none) for its storage. This means that thousands of scsi_debug devices can be created without exhausting the host machine's RAM. The downside is that all scsi_debug devices share the same ramdisk image. This option changes the way a following write to the add_host parameter (or an add_host in the module/driver invocation) operates. For each new host that is created while per_host_store is true, a new store (of dev-size_mb MiB) is created and associated with all the LUs that belong to that new host. The user (who will need root permissions) needs to take care not to exhaust all the machine's available RAM. One reason for doing this is to check that (partial) disk to disk copies based on scsi_debug devices have actually copied accurately. To test this the add_host=<n> parameter where <n> is 2 or greater can be used when the scsi_debug module is loaded. Let us assume that /dev/sdb and /dev/sg1 are the same scsi_debug device, while /dev/sdc and /dev/sg2 are the same scsi_debug device. With per_host_store=1 add_host=2 they will have different ramdisk images. Then the following pseudocode could be executed to check if the sgh_dd copy worked: dd if=/dev/urandom of=/dev/sdb sgh_dd if=/dev/sg1 of=/dev/sg2 [plus option(s) to test] cmp /dev/sdb /dev/sdc If the cmp fails then the copy has failed (or some other mechanism wrote to /dev/sdb or /dev/sdc in the interim). [mkp: use kstrtobool()] Link: https://lore.kernel.org/r/20200421151424.32668-3-dgilbert@interlog.com Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-04scsi: scsi_debug: Randomize command completion timeDouglas Gilbert
Add a new command line option (e.g. random=1) and sysfs attribute that causes subsequent command completion times to be between the current command delay setting and 0. A uniformly distributed 32 bit, kernel provided integer is used for this purpose. Since the existing 'delay' whose units are jiffies (typically milliseconds) and 'ndelay' (units: nanoseconds) options (and sysfs attributes) span a range greater than 32 bits, some scaling is required. The purpose of this patch is to widen the range of testing cases that are visited in long running tests. Put simply: rarely struct race conditions are more likely to be found when this facility is used. The default is the previous case in which all command completions were roughly equal to (if not, slightly longer) than the value given by the 'delay' or 'ndelay' settings (or their defaults). This option's default is equivalent to setting 'random=0' . [mkp: use kstrtobool()] Link: https://lore.kernel.org/r/20200421151424.32668-2-dgilbert@interlog.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-04block: add a cdrom_device_info pointer to struct gendiskChristoph Hellwig
Add a pointer to the CDROM information structure to struct gendisk. This will allow various removable media file systems to call directly into the CDROM layer instead of abusing ioctls with kernel pointers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-29scsi: dpt_i2o: Remove always false 'chan < 0' statementXiongfeng Wang
The channel index is represented by an unsigned variable 'u32 chan'. We don't need to check whether it is less than zero, the 'chan < 0' statement is always false. Remove it. Link: https://lore.kernel.org/r/1588162218-61757-1-git-send-email-wangxiongfeng2@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-29scsi: qedi: Check for buffer overflow in qedi_set_path()Dan Carpenter
Smatch complains that the "path_data->handle" variable is user controlled. It comes from iscsi_set_path() so that seems possible. It's harmless to add a limit check. The qedi->ep_tbl[] array has qedi->max_active_conns elements (which is always ISCSI_MAX_SESS_PER_HBA (4096) elements). The array is allocated in the qedi_cm_alloc_mem() function. Link: https://lore.kernel.org/r/20200428131939.GA696531@mwanda Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-29scsi: qla2xxx: make 1-bit bit-fields unsigned intColin Ian King
The bitfields mpi_fw_dump_reading and mpi_fw_dumped are currently signed which is not recommended as the representation is an implementation defined behaviour. Fix this by making the bit-fields unsigned ints. Link: https://lore.kernel.org/r/20200428102013.1040598-1-colin.king@canonical.com Fixes: cbb01c2f2f63 ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-29scsi: core: free sgtables in case command setup failsJohannes Thumshirn
In case scsi_setup_fs_cmnd() fails we're not freeing the sgtables allocated by scsi_init_io(), thus we leak the allocated memory. Free the sgtables allocated by scsi_init_io() in case scsi_setup_fs_cmnd() fails. Technically scsi_setup_scsi_cmnd() does not suffer from this problem as it can only fail if scsi_init_io() fails, so it does not have sgtables allocated. But to maintain symmetry and as a measure of defensive programming, free the sgtables on scsi_setup_scsi_cmnd() failure as well. scsi_mq_free_sgtables() has safeguards against double-freeing of memory so this is safe to do. While we're at it, rename scsi_mq_free_sgtables() to scsi_free_sgtables(). Link: https://bugzilla.kernel.org/show_bug.cgi?id=205595 Link: https://lore.kernel.org/r/20200428104605.8143-2-johannes.thumshirn@wdc.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-28scsi: ibmvscsi: Fix WARN_ON during event pool releaseTyrel Datwyler
While removing an ibmvscsi client adapter a WARN_ON like the following is seen in the kernel log: drmgr: drmgr: -r -c slot -s U9080.M9S.783AEC8-V11-C11 -w 5 -d 1 WARNING: CPU: 9 PID: 24062 at ../kernel/dma/mapping.c:311 dma_free_attrs+0x78/0x110 Supported: No, Unreleased kernel CPU: 9 PID: 24062 Comm: drmgr Kdump: loaded Tainted: G X 5.3.18-12-default NIP: c0000000001fa758 LR: c0000000001fa744 CTR: c0000000001fa6e0 REGS: c0000002173375d0 TRAP: 0700 Tainted: G X (5.3.18-12-default) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28088282 XER: 20000000 CFAR: c0000000001fbf0c IRQMASK: 1 GPR00: c0000000001fa744 c000000217337860 c00000000161ab00 0000000000000000 GPR04: 0000000000000000 c000011e12250000 0000000018010000 0000000000000000 GPR08: 0000000000000000 0000000000000001 0000000000000001 c0080000190f4fa8 GPR12: c0000000001fa6e0 c000000007fc2a00 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 000000011420e310 0000000000000000 0000000000000000 0000000018010000 GPR28: c00000000159de50 c000011e12250000 0000000000006600 c000011e5c994848 NIP [c0000000001fa758] dma_free_attrs+0x78/0x110 LR [c0000000001fa744] dma_free_attrs+0x64/0x110 Call Trace: [c000000217337860] [000000011420e310] 0x11420e310 (unreliable) [c0000002173378b0] [c0080000190f0280] release_event_pool+0xd8/0x120 [ibmvscsi] [c000000217337930] [c0080000190f3f74] ibmvscsi_remove+0x6c/0x160 [ibmvscsi] [c000000217337960] [c0000000000f3cac] vio_bus_remove+0x5c/0x100 [c0000002173379a0] [c00000000087a0a4] device_release_driver_internal+0x154/0x280 [c0000002173379e0] [c0000000008777cc] bus_remove_device+0x11c/0x220 [c000000217337a60] [c000000000870fc4] device_del+0x1c4/0x470 [c000000217337b10] [c0000000008712a0] device_unregister+0x30/0xa0 [c000000217337b80] [c0000000000f39ec] vio_unregister_device+0x2c/0x60 [c000000217337bb0] [c00800001a1d0964] dlpar_remove_slot+0x14c/0x250 [rpadlpar_io] [c000000217337c50] [c00800001a1d0bcc] remove_slot_store+0xa4/0x110 [rpadlpar_io] [c000000217337cd0] [c000000000c091a0] kobj_attr_store+0x30/0x50 [c000000217337cf0] [c00000000057c934] sysfs_kf_write+0x64/0x90 [c000000217337d10] [c00000000057be10] kernfs_fop_write+0x1b0/0x290 [c000000217337d60] [c000000000488c4c] __vfs_write+0x3c/0x70 [c000000217337d80] [c00000000048c648] vfs_write+0xd8/0x260 [c000000217337dd0] [c00000000048ca8c] ksys_write+0xdc/0x130 [c000000217337e20] [c00000000000b488] system_call+0x5c/0x70 Instruction dump: 7c840074 f8010010 f821ffb1 20840040 eb830218 7c8407b4 48002019 60000000 2fa30000 409e003c 892d0988 792907e0 <0b090000> 2fbd0000 419e0028 2fbc0000 ---[ end trace 5955b3c0cc079942 ]--- rpadlpar_io: slot U9080.M9S.783AEC8-V11-C11 removed This is tripped as a result of irqs being disabled during the call to dma_free_coherent() by release_event_pool(). At this point in the code path we have quiesced the adapter and it is overly paranoid to be holding the host lock. [mkp: fixed build warning reported by sfr] Link: https://lore.kernel.org/r/1588027793-17952-1-git-send-email-tyreld@linux.ibm.com Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-27scsi: ibmvfc: Don't send implicit logouts prior to NPIV loginBrian King
Commit ed830385a2b1 ("scsi: ibmvfc: Avoid loss of all paths during SVC node reboot") introduced a regression where when the client resets or re-enables its CRQ with the hypervisor there is a chance that if the server side doesn't issue its INIT handshake quick enough the client can issue an Implicit Logout prior to doing an NPIV Login. The server treats this scenario as a protocol violation and closes the CRQ on its end forcing the client through a reset that gets the client host state and next host action out of agreement leading to a BUG assert. ibmvfc 30000003: Partner initialization complete ibmvfc 30000002: Partner initialization complete ibmvfc 30000002: Host partner adapter deregistered or failed (rc=2) ibmvfc 30000002: Partner initialized ------------[ cut here ]------------ kernel BUG at ../drivers/scsi/ibmvscsi/ibmvfc.c:4489! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Supported: No, Unreleased kernel CPU: 16 PID: 1290 Comm: ibmvfc_0 Tainted: G OE X 5.3.18-12-default NIP: c00800000d84a2b4 LR: c00800000d84a040 CTR: c00800000d84a2a0 REGS: c00000000cb57a00 TRAP: 0700 Tainted: G OE X (5.3.18-12-default) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24000848 XER: 00000001 CFAR: c00800000d84a070 IRQMASK: 1 GPR00: c00800000d84a040 c00000000cb57c90 c00800000d858e00 0000000000000000 GPR04: 0000000000000000 0000000000000000 0000000000000000 00000000000000a0 GPR08: c00800000d84a074 0000000000000001 0000000000000014 c00800000d84d7d0 GPR12: 0000000000000000 c00000001ea28200 c00000000016cd98 0000000000000000 GPR16: c00800000d84b7b8 0000000000000000 0000000000000000 c00000542c706d68 GPR20: 0000000000000005 c00000542c706d88 5deadbeef0000100 5deadbeef0000122 GPR24: 000000000000000c 000000000000000b c00800000d852180 0000000000000001 GPR28: 0000000000000000 c00000542c706da0 c00000542c706860 c00000542c706828 NIP [c00800000d84a2b4] ibmvfc_work+0x3ac/0xc90 [ibmvfc] LR [c00800000d84a040] ibmvfc_work+0x138/0xc90 [ibmvfc] This scenario can be prevented by rejecting any attempt to send an Implicit Logout if the client adapter is not logged in yet. Link: https://lore.kernel.org/r/20200427214824.6890-1-tyreld@linux.ibm.com Fixes: ed830385a2b1 ("scsi: ibmvfc: Avoid loss of all paths during SVC node reboot") Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-27scsi: core: doc: Change function comments to kernel-doc styleAndré Almeida
Despite of functions being documented, they are not in the kernel-doc specification, and could not be included in kernel documentation. Change the style of functions comments to be compliant to the kernel-doc style. When the function comments are outdated, update then. [mkp: a few edits] Link: https://lore.kernel.org/r/20200419050148.33371-1-andrealmeid@collabora.com Signed-off-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-27scsi: ufs-qcom: Configure write booster typeAsutosh Das
Enable WriteBooster for Qualcomm platform. Link: https://lore.kernel.org/r/cd4cf745ea0b3a59c2075036e17316b97494fe65.1587591527.git.asutoshd@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-27scsi: ufs: sysfs: Add sysfs entries for write boosterAsutosh Das
Adds unit, device, geometry descriptor sysfs entries. Adds flags sysfs entries for write booster. Link: https://lore.kernel.org/r/98987ef17844292bd42c57613990a3a26c6de2b8.1587591527.git.asutoshd@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-27scsi: ufs: Add write booster feature supportAsutosh Das
The write performance of TLC NAND is considerably lower than SLC NAND. Using SLC NAND as a WriteBooster Buffer enables the write request to be processed with lower latency and improves the overall write performance. Adds support for shared-buffer mode WriteBooster. WriteBooster enable: SW enables it when clocks are scaled up, thus it's enabled only in high load conditions. WriteBooster disable: SW will disable the feature, when clocks are scaled down. Thus writes would go as normal writes. To keep the endurance of the WriteBooster Buffer at a maximum, this load-based toggling is adopted. Link: https://lore.kernel.org/r/2871444d9083b0e9323ef6d8ff1b544b7784adc9.1587591527.git.asutoshd@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-27scsi: ufs: Use true for bool variables in ufshcd_complete_dev_init()Jason Yan
Fix the following coccicheck warning: drivers/scsi/ufs/ufshcd.c:4140:6-14: WARNING: Assignment of 0/1 to bool variable. Link: https://lore.kernel.org/r/20200426094305.24083-1-yanaijie@huawei.com Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-27scsi: sr: Use {get,put}_unaligned_be*() instead of open-coding these functionsBart Van Assche
This patch makes the sr code slightly easier to read. Link: https://lore.kernel.org/r/20200427014844.12109-1-bvanassche@acm.org Cc: Merlijn Wajer <merlijn@archive.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-27scsi: aacraid: Fix error handling paths in aac_probe_one()Christophe JAILLET
If 'scsi_host_alloc()' or 'kcalloc()' fail, 'error' is known to be 0. Set it explicitly to -ENOMEM before branching to the error handling path. While at it, remove 2 useless assignments to 'error'. These values are overwridden a few lines later. Link: https://lore.kernel.org/r/20200412094039.8822-1-christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-25scsi_ioctl.c: switch SCSI_IOCTL_GET_IDLUN to copy_to_user()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-04-24scsi: sgiwd93: Remove unneeded semicolon in sgiwd93.cJason Yan
Fix the following coccicheck warning: drivers/scsi/sgiwd93.c:190:2-3: Unneeded semicolon Link: https://lore.kernel.org/r/20200421034029.28030-1-yanaijie@huawei.com Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: qla4xxx: Remove unneeded semicolon in ql4_os.cJason Yan
Fix the following coccicheck warning: drivers/scsi/qla4xxx/ql4_os.c:969:3-4: Unneeded semicolon Link: https://lore.kernel.org/r/20200421034038.28113-1-yanaijie@huawei.com Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: isci: Use true, false for bool variablesJason Yan
Fix the following coccicheck warning: drivers/scsi/isci/isci.h:515:1-12: WARNING: Assignment of 0/1 to bool variable drivers/scsi/isci/isci.h:503:1-12: WARNING: Assignment of 0/1 to bool variable drivers/scsi/isci/isci.h:509:1-12: WARNING: Assignment of 0/1 to bool variable Link: https://lore.kernel.org/r/20200421034050.28193-1-yanaijie@huawei.com Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: bnx2fc: Remove unneeded semicolon in bnx2fc_fcoe.cJason Yan
Fix the following coccicheck warning: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:948:4-5: Unneeded semicolon drivers/scsi/bnx2fc/bnx2fc_fcoe.c:968:4-5: Unneeded semicolon Link: https://lore.kernel.org/r/20200421034019.27949-1-yanaijie@huawei.com Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: bfa: Remove unneeded semicolon in bfa_fcs_rport.cJason Yan
Fix the following coccicheck warning: drivers/scsi/bfa/bfa_fcs_rport.c:2452:2-3: Unneeded semicolon drivers/scsi/bfa/bfa_fcs_rport.c:1578:3-4: Unneeded semicolon Link: https://lore.kernel.org/r/20200421033957.27783-1-yanaijie@huawei.com Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: bfa: Remove set but not used variable 'fchs'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/bfa/bfa_svc.c: In function 'uf_recv': drivers/scsi/bfa/bfa_svc.c:5520:17: warning: variable 'fchs' set but not used [-Wunused-but-set-variable] struct fchs_s *fchs; ^ Link: https://lore.kernel.org/r/20200418071057.96699-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: snic: Make snic_io_exch_ver_cmpl_handler() return voidJason Yan
This function does not need a return value since no callers depend on it. Make it return void. This also fixes the coccicheck warning: drivers/scsi/snic/snic_ctl.c:163:5-8: Unneeded variable: "ret". Return "0" on line 228 Link: https://lore.kernel.org/r/20200418070615.11603-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: mpt3sas: Remove NULL check before freeing functionJason Yan
Fix the following coccicheck warning: drivers/scsi/mpt3sas/mpt3sas_base.c:4906:3-19: WARNING: NULL check before some freeing functions is not needed. Link: https://lore.kernel.org/r/20200418095850.34883-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: ipr: Remove NULL check before freeing functionJason Yan
Fix the following coccicheck warning: drivers/scsi/ipr.c:9533:2-18: WARNING: NULL check before some freeing functions is not needed. Link: https://lore.kernel.org/r/20200418095903.35118-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: bfa: Remove unneeded semicolon in bfa_fcs_lport_ns_sm_online()Jason Yan
Fix the following coccicheck warning: drivers/scsi/bfa/bfa_fcs_lport.c:4361:3-4: Unneeded semicolon Link: https://lore.kernel.org/r/20200418070553.11262-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: pmcraid: Replace dma_pool_malloc with dma_pool_zallocWu Bo
Replace dma_pool_malloc with dma_pool_zalloc to make the code more concise in pmcraid_allocate_control_blocks() function. Link: https://lore.kernel.org/r/1587197241-274646-1-git-send-email-wubo40@huawei.com Signed-off-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: core: Avoid calling synchronize_rcu() for each device in scsi_host_block()Ming Lei
scsi_host_block() calls scsi_internal_device_block() for each scsi_device and scsi_internal_device_block() calls blk_mq_quiesce_queue() for each LUN. Since synchronize_rcu() is called from blk_mq_quiesce_queue(), this can cause substantial slowdowns on systems with many LUNs. Use scsi_internal_device_block_nowait() to implement scsi_host_block() so it is sufficient to run synchronize_rcu() once. This is safe since SCSI does not set the BLK_MQ_F_BLOCKING flag. [mkp: commit desc and comment tweaks] Link: https://lore.kernel.org/r/20200423020713.332743-1-ming.lei@redhat.com Cc: Steffen Maier <maier@linux.ibm.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dexuan Cui <decui@microsoft.com> Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: BusLogic: Remove conversion to bool in blogic_inquiry()Jason Yan
The '!=' expression itself is bool, no need to convert it to bool again. This fixes the following coccicheck warning: drivers/scsi/BusLogic.c:2240:46-51: WARNING: conversion to bool not needed here Link: https://lore.kernel.org/r/20200421034120.28433-1-yanaijie@huawei.com Acked-by: Khalid Aziz <khalid@gonehiking.org> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: megaraid: Use true, false for bool variablesJason Yan
Fix the following coccicheck warning: drivers/scsi/megaraid/megaraid_sas_fusion.c:4242:6-16: WARNING: Assignment of 0/1 to bool variable drivers/scsi/megaraid/megaraid_sas_fusion.c:4786:1-29: WARNING: Assignment of 0/1 to bool variable drivers/scsi/megaraid/megaraid_sas_fusion.c:4791:1-29: WARNING: Assignment of 0/1 to bool variable drivers/scsi/megaraid/megaraid_sas_fusion.c:4716:1-29: WARNING: Assignment of 0/1 to bool variable drivers/scsi/megaraid/megaraid_sas_fusion.c:4721:1-29: WARNING: Assignment of 0/1 to bool variable Link: https://lore.kernel.org/r/20200421034111.28353-1-yanaijie@huawei.com Acked-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: mpt3sas: Update mpt3sas version to 33.101.00.00Suganath Prabu
Update mpt3sas driver version from 33.100.00.00 to 33.101.00.00. Link: https://lore.kernel.org/r/1587626596-1044-6-git-send-email-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: mpt3sas: Handle RDPQ DMA allocation in same 4G regionSuganath Prabu
For INVADER_SERIES, each set of 8 reply queues (0 - 7, 8 - 15,..), and for VENTURA_SERIES, each set of 16 reply queues (0 - 15, 16 - 31,..) need to be within the same 4 GB boundary. Driver uses limitation of VENTURA_SERIES to manage INVADER_SERIES as well. The driver is allocating the DMA able memory for RDPQs accordingly. 1) At driver load, set DMA mask to 64 and allocate memory for RDPQs 2) Check if allocated resources for RDPQ are in the same 4GB range 3) If #2 is true, continue with 64 bit DMA and go to #6 4) If #2 is false, then free all the resources from #1 5) Set DMA mask to 32 and allocate RDPQs 6) Proceed with driver loading and other allocations Link: https://lore.kernel.org/r/1587626596-1044-5-git-send-email-suganath-prabu.subramani@broadcom.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: mpt3sas: Separate out RDPQ allocation to new functionSuganath Prabu
For readability separate out RDPQ allocations to new function base_alloc_rdpq_dma_pool(). Link: https://lore.kernel.org/r/1587626596-1044-4-git-send-email-suganath-prabu.subramani@broadcom.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: mpt3sas: Rename function name is_MSB_are_sameSuganath Prabu
Rename is_MSB_are_same() to mpt3sas_check_same_4gb_region() for better readability. Link: https://lore.kernel.org/r/1587626596-1044-3-git-send-email-suganath-prabu.subramani@broadcom.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: mpt3sas: Don't change the DMA coherent mask after allocationsChristoph Hellwig
The DMA layer does not allow changing the DMA coherent mask after there are outstanding allocations. Link: https://lore.kernel.org/r/1587626596-1044-2-git-send-email-suganath-prabu.subramani@broadcom.com Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: bnx2fc: Add missing annotation for bnx2fc_abts_cleanup()Jules Irenge
Sparse reports the following warning: warning: context imbalance in bnx2fc_abts_cleanup() - unexpected unlock The root cause is the missing annotation at bnx2fc_abts_cleanup(). Add the missing __must_hold(&tgt->tgt_lock) annotation. Link: https://lore.kernel.org/r/20200411001933.10072-8-jbi.octave@gmail.com Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: aic7xxx: Remove unnecessary NULL checks before kfreeAlex Dewar
There are a number of places in the aic7xxx driver where a NULL check is performed before a kfree(). However, kfree() already performs NULL checks so this is unnecessary. Remove the checks. Issue identified with Coccinelle. Link: https://lore.kernel.org/r/20200403164712.49579-1-alex.dewar@gmx.co.uk Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: aic7xxx: Use kzalloc() instead of kmalloc()+memset()Alex Dewar
There are a couple of places where kzalloc() could be used directly instead of calling kmalloc() then memset(). Replace them. Link: https://lore.kernel.org/r/20200403163611.46756-1-alex.dewar@gmx.co.uk Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: cxgb4i: Remove superfluous null checkXu Wang
In do_abort_rpl_rss, the null check of 'clk' is not needed. Link: https://lore.kernel.org/r/20200402110832.12712-1-vulab@iscas.ac.cn Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: qla2xxx: Delete all sessions before unregister local nvme portQuinn Tran
Delete all sessions before unregistering local nvme port. This allows nvme layer to decrement all active rport count down to zero. Once the count is down to zero, nvme would call qla to continue with the npiv port deletion. PID: 27448 TASK: ffff9e34b777c1c0 CPU: 0 COMMAND: "qaucli" 0 [ffff9e25e84abbd8] __schedule at ffffffff977858ca 1 [ffff9e25e84abc68] schedule at ffffffff97785d79 2 [ffff9e25e84abc78] schedule_timeout at ffffffff97783881 3 [ffff9e25e84abd28] wait_for_completion at ffffffff9778612d 4 [ffff9e25e84abd88] qla_nvme_delete at ffffffffc0e3024e [qla2xxx] 5 [ffff9e25e84abda8] qla24xx_vport_delete at ffffffffc0e024b9 [qla2xxx] 6 [ffff9e25e84abdf0] fc_vport_terminate at ffffffffc011c247 [scsi_transport_fc] 7 [ffff9e25e84abe28] store_fc_host_vport_delete at ffffffffc011cd94 [scsi_transport_fc] 8 [ffff9e25e84abe70] dev_attr_store at ffffffff974b376b 9 [ffff9e25e84abe80] sysfs_kf_write at ffffffff972d9a92 10 [ffff9e25e84abe90] kernfs_fop_write at ffffffff972d907b 11 [ffff9e25e84abec8] vfs_write at ffffffff9724c790 12 [ffff9e25e84abf08] sys_write at ffffffff9724d55f 13 [ffff9e25e84abf50] system_call_fastpath at ffffffff97792ed2 RIP: 00007fc0bd81a6fd RSP: 00007ffff78d9648 RFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000022 RCX: 00007ffff78d96e0 RDX: 0000000000000022 RSI: 00007ffff78d94e0 RDI: 0000000000000008 RBP: 00007ffff78d9440 R8: 0000000000000000 R9: 00007fc0bd48b2cd R10: 0000000000000017 R11: 0000000000000293 R12: 0000000000000000 R13: 00005624e4dac840 R14: 00005624e4da9a10 R15: 0000000000000000 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b Link: https://lore.kernel.org/r/20200331104015.24868-4-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: qla2xxx: Fix hang when issuing nvme disconnect-all in NPIVArun Easi
In NPIV environment, a NPIV host may use a queue pair created by base host or other NPIVs, so the check for a queue pair created by this NPIV is not correct, and can cause an abort to fail, which in turn means the NVME command not returned. This leads to hang in nvme_fc layer in nvme_fc_delete_association() which waits for all I/Os to be returned, which is seen as hang in the application. Link: https://lore.kernel.org/r/20200331104015.24868-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: qla2xxx: Fix MPI failure AEN (8200) handlingArun Easi
Today, upon an MPI failure AEN, on top of collecting an MPI dump, a regular firmware dump is also taken and then chip reset. This is disruptive to IOs and not required. Make the firmware dump collection, followed by chip reset, optional (not done by default). Firmware dump buffer and MPI dump buffer are independent of each other with this change and each can have dump that was taken at two different times for two different issues. The MPI dump is saved in a separate buffer and is retrieved differently from firmware dump. To collect full dump on MPI failure AEN, a module parameter is introduced: ql2xfulldump_on_mpifail (default: 0) Link: https://lore.kernel.org/r/20200331104015.24868-2-njavali@marvell.com Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-23esas2r: don't bother with __copy_to_user()Al Viro
sure, we'd done copy_from_user() on the same range, so we can skip access_ok()... and it's not worth bothering. Just use copy_to_user(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-04-22block: move dma_pad handling from blk_rq_map_sg into the callersChristoph Hellwig
There are only two callers of blk_rq_map_sg/__blk_rq_map_sg that set the dma_pad value in the queue. Move the handling into those callers instead of burdening the common code, and move the ->extra_len field from struct request to struct scsi_cmnd. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-13 11:50:56 +0000