summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2017-10-25scsi: megaraid_sas: Resize MFA frame used for IOC INIT to 4kShivasharan S
Older firmware version unconditionally pulls 4k frame for IOC INIT MFA frame. But driver allocates 1k or 4k max_chain_frame_sz based on FW capability. During boot time, this results in DMA read errors. Workaround fix in driver by allocating separate ioc_init frame of 4k size to support older firmware. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: megaraid_sas: Update current host time to FW during IOC InitShivasharan S
Driver needs to send current host time to firmware during init. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: megaraid_sas: Move controller memory allocations and DMA mask settings ↵Shivasharan S
from probe to megasas_init_fw Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: megaraid_sas: Move initialization of instance parameters inside newly ↵Shivasharan S
created function megasas_init_ctrl_params Code refactoring, no functional change. Create new function to initialize all the controller parameters during load time. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: megaraid_sas: remove instance->ctrl_infoShivasharan S
Re-use the pre-allocated ctrl_info DMA buffer. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: megaraid_sas: Pre-allocate frequently used DMA buffersShivasharan S
Pre-allocate few of the frequently used DMA buffers during load time. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: megaraid_sas: Create separate functions for allocating and freeing ↵Shivasharan S
controller DMA buffers Code refactoring - create separate functions to allocate and free controller DMA buffers Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: megaraid_sas: Create separate functions to allocate ctrl memoryShivasharan S
No functional change. Code refactoring to improve readability. Move the code to allocate and free controller memory into separate functions. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: megaraid_sas: reduce size of fusion_context and use kmalloc for allocationShivasharan S
fusion_context structure is very large around 180kB and most of the size is contributed by log_to_span array. Move log_to_span out of fusion context and have separate allocation for log_to_span. And use kmalloc to allocate fusion_context. Currently kmemleak reports 1000s of false positives for fusion->cmd_list[]. kmemleak does not track page allocation for fusion_context. This change will also fix the false positives reported by kmemleak. Ref: https://marc.info/?l=linux-scsi&m=150545293900917 Reported-by: Shu Wang <shuwang@redhat.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: megaraid_sas: replace is_ventura with adapter_type checksShivasharan S
No functional change. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: megaraid_sas: Remove redundant checks for ctrl_contextShivasharan S
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: megaraid_sas: replace instance->ctrl_context checks with ↵Shivasharan S
instance->adapter_type Increase code readability. No functional change. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: megaraid_sas: Add support for Crusader controllersShivasharan S
Add support for PCI VID/DID 0x1000/0x0015 based MegaRAID controllers. Since the DID 0x0015 conflicts with DELL PERC5 controllers, add vendor ID based check specific for DELL PERC5. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: megaraid_sas: use adapter_type for all gen controllersShivasharan S
No functional change. Refactor adapter_type to set for all generation controllers, not just for fusion controllers. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hpsa: bump driver versionDon Brace
Reviewed-by: Gerry Morong <gerry.morong@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hpsa: add enclosure logical identifierDon Brace
Add support for enclosure logical identifier Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hpsa: correct logical volume removalDon Brace
Suggested-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hpsa: reduce warning messages on device removalDon Brace
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hpsa: update queue depth for externalsDon Brace
Preserve external device queue depth during a scan operation. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hpsa: correct smart path enabledDon Brace
Correct re-enabling ioaccel after: 1) RAID transformations and 2) multi-path fail-overs. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hpsa: change timeout for internal cmdsDon Brace
There are times when the DEFAULT_TIMEOUT (30 seconds) is not enough. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hpsa: update discovery pollingBader Ali Saleh
Correct a corner case where newly created volumes are not detected automatically on an external RAID controller that has no configured volumes during initial device discovery. The fix is to set the discovery_polling flag when an external RAID controller is detected. This causes a device rescan every 20-30 seconds, so that newly created volumes will be detected automatically. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hpsa: add controller checkpointDon Brace
Tell hpsa controller to generate a checkpoint for rare lockup conditions. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hpsa: clear tmpdevice in scan threadScott Teel
clean up stale information. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hpsa: cleanup sas_phy structures in sysfs when unloadingMartin Wilck
I am resubmitting this patch on behalf of Martin Wilck with his permission. The original patch can be found here: https://www.spinics.net/lists/linux-scsi/msg102083.html This patch did not help until Hannes's commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod") was applied to the kernel. -------------------------------------- Original patch description from Martin: -------------------------------------- When the hpsa module is unloaded using rmmod, dangling symlinks remain under /sys/class/sas_phy. Fix this by calling sas_phy_delete() rather than sas_phy_free (which, according to comments, should not be called for PHYs that have been set up successfully, anyway). Tested-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin Wilck <mwilck@suse.de> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hpsa: destroy sas transport properties before scsi_hostMartin Wilck
This patch cleans up a lot of warnings when unloading the driver. A current example of the stack trace starts with: [ 142.570715] sysfs group 'power' not found for kobject 'port-5:0' There can be hundreds of these messages during a driver unload. I am resubmitting this patch on behalf of Martin Wilck with his permission. His original patch can be found here: https://www.spinics.net/lists/linux-scsi/msg102085.html This patch did not help until Hannes's commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod") was applied to the kernel. --------------------------- Original patch description: --------------------------- Unloading the hpsa driver causes warnings [ 1063.793652] WARNING: CPU: 1 PID: 4850 at ../fs/sysfs/group.c:237 device_del+0x54/0x240() [ 1063.793659] sysfs group ffffffff81cf21a0 not found for kobject 'port-2:0' with two different stacks: 1) [ 1063.793774] [<ffffffff81448af4>] device_del+0x54/0x240 [ 1063.793780] [<ffffffff8145178a>] transport_remove_classdev+0x4a/0x60 [ 1063.793784] [<ffffffff81451216>] attribute_container_device_trigger+0xa6/0xb0 [ 1063.793802] [<ffffffffa0105d46>] sas_port_delete+0x126/0x160 [scsi_transport_sas] [ 1063.793819] [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa] 2) [ 1063.797103] [<ffffffff81448af4>] device_del+0x54/0x240 [ 1063.797118] [<ffffffffa0105d4e>] sas_port_delete+0x12e/0x160 [scsi_transport_sas] [ 1063.797134] [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa] This is caused by the fact that host device hostX is deleted before the SAS transport devices hostX/port-a:b. This patch fixes this by reverting the order of device deletions. Tested-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin Wilck <mwilck@suse.de> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-23scsi: Suppress a kernel warning in case the prep function returns BLKPREP_DEFERBart Van Assche
The legacy block layer handles requests as follows: - If the prep function returns BLKPREP_OK, let blk_peek_request() return the pointer to that request. - If the prep function returns BLKPREP_DEFER, keep the RQF_STARTED flag and retry calling the prep function later. - If the prep function returns BLKPREP_KILL or BLKPREP_INVALID, end the request. In none of these cases it is correct to clear the SCMD_INITIALIZED flag from inside scsi_prep_fn(). Since scsi_prep_fn() already guarantees that scsi_init_command() will be called once even if scsi_prep_fn() is called multiple times, remove the code that clears SCMD_INITIALIZED from scsi_prep_fn(). The scsi-mq code handles requests as follows: - If scsi_mq_prep_fn() returns BLKPREP_OK, set the RQF_DONTPREP flag and submit the request to the SCSI LLD. - If scsi_mq_prep_fn() returns BLKPREP_DEFER, call blk_mq_delay_run_hw_queue() and return BLK_STS_RESOURCE. - If the prep function returns BLKPREP_KILL or BLKPREP_INVALID, call scsi_mq_uninit_cmd() and let the blk-mq core end the request. In none of these cases scsi_mq_prep_fn() should clear the SCMD_INITIALIZED flag. Hence remove the code from scsi_mq_prep_fn() function that clears that flag. This patch avoids that the following warning is triggered when using the legacy block layer: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4198 at drivers/scsi/scsi_lib.c:654 scsi_end_request+0x1de/0x220 CPU: 1 PID: 4198 Comm: mkfs.f2fs Not tainted 4.14.0-rc5+ #1 task: ffff91c147a4b800 task.stack: ffffb282c37b8000 RIP: 0010:scsi_end_request+0x1de/0x220 Call Trace: <IRQ> scsi_io_completion+0x204/0x5e0 scsi_finish_command+0xce/0xe0 scsi_softirq_done+0x126/0x130 blk_done_softirq+0x6e/0x80 __do_softirq+0xcf/0x2a8 irq_exit+0xab/0xb0 do_IRQ+0x7b/0xc0 common_interrupt+0x90/0x90 </IRQ> RIP: 0010:_raw_spin_unlock_irqrestore+0x9/0x10 __test_set_page_writeback+0xc7/0x2c0 __block_write_full_page+0x158/0x3b0 block_write_full_page+0xc4/0xd0 blkdev_writepage+0x13/0x20 __writepage+0x12/0x40 write_cache_pages+0x204/0x500 generic_writepages+0x48/0x70 blkdev_writepages+0x9/0x10 do_writepages+0x34/0xc0 __filemap_fdatawrite_range+0x6c/0x90 file_write_and_wait_range+0x31/0x90 blkdev_fsync+0x16/0x40 vfs_fsync_range+0x44/0xa0 do_fsync+0x38/0x60 SyS_fsync+0xb/0x10 entry_SYSCALL_64_fastpath+0x13/0x94 ---[ end trace 86e8ef85a4a6c1d1 ]--- Fixes: commit 64104f703212 ("scsi: Call scsi_initialize_rq() for filesystem requests") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-23ufs/phy: qcom: Refactor to use phy_init callVivek Gautam
Refactor ufs_qcom_power_up_sequence() to get rid of ugly exported phy APIs and use the phy_init() and phy_power_on() to do the phy initialization. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23scsi/ufs: qcom: Set phy mode based on the controllers HS MODEVivek Gautam
Set the phy mode based on the UFS HS PA mode. This lets the controller let phy know the mode in which the PHY Adapter is running and set the phy rates accordingly. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
There were quite a few overlapping sets of changes here. Daniel's bug fix for off-by-ones in the new BPF branch instructions, along with the added allowances for "data_end > ptr + x" forms collided with the metadata additions. Along with those three changes came veritifer test cases, which in their final form I tried to group together properly. If I had just trimmed GIT's conflict tags as-is, this would have split up the meta tests unnecessarily. In the socketmap code, a set of preemption disabling changes overlapped with the rename of bpf_compute_data_end() to bpf_compute_data_pointers(). Changes were made to the mv88e6060.c driver set addr method which got removed in net-next. The hyperv transport socket layer had a locking change in 'net' which overlapped with a change of socket state macro usage in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19qed: Fix iWARP out of order flowMichal Kalderon
Out of order flow is not working for iWARP. This patch got cut out from initial series that added out of order support for iWARP. Make out of order code common for iWARP and iSCSI. Add new configuration option CONFIG_QED_OOO. Set by qedr and qedi Kconfigs. Fixes: d1abfd0b4ee2 ("qed: Add iWARP out of order support") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18scsi: pm80xx: corrected linkrate value.Viswas G
Corrected the value defined for LINKRATE_60 (6 Gig). Signed-off-by: Raj Dinesh <Raj.Dinesh@microsemi.com> Signed-off-by: Viswas G <viswas.g@microsemi.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-18scsi: pm80xx: panic on ncq error cleaning up the read log.Viswas G
when there's an error in 'ncq mode' the host has to read the ncq error log (10h) to clear the error state. however, the ccb that is setup for doing this doesn't setup the ccb so that the previous state is cleared. if the ccb was previously used for an IO n_elems is set and pm8001_ccb_task_free() treats this as the signal to go free a scatter-gather list (that's already been freed). Signed-off-by: Deepak Ukey <deepak.ukey@microsemi.com> Signed-off-by: Viswas G <Viswas.G@microsemi.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-18scsi: pm80xx: corrected SATA abort handling sequence.Viswas G
Modified SATA abort handling with following steps: 1) Set device state as recovery. 2) Send phy reset. 3) Wait for reset completion. 4) After successful reset, abort all IO's to the device. 5) After aborting all IO's to device, set device state as operational. Signed-off-by: Deepak Ukey <deepak.ukey@microsemi.com> Signed-off-by: Viswas G <Viswas.G@microsemi.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-18scsi: pm80xx: modified port reset timer value for PM8006 cardViswas G
Added port reset timer value as 2000ms for PM8006 sata controller. Signed-off-by: Deepak Ukey <deepak.ukey@microsemi.com> Signed-off-by: Viswas G <Viswas.G@microsemi.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-18scsi: pm80xx: cleanup in pm8001_abort_task function.Viswas G
Signed-off-by: Deepak Ukey <deepak.ukey@microsemi.com> Signed-off-by: Viswas G <Viswas.G@microsemi.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-18scsi: pm80xx: tag allocation for phy control request.Viswas G
tag is taken from the tag pool instead of using the hardcoded tag value(1). Signed-off-by: Deepak Ukey <deepak.ukey@microsemi.com> Signed-off-by: Viswas G <Viswas.G@microsemi.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-18scsi: pm80xx: Different SAS addresses for phys.Viswas G
Different SAS addresses are assigned for each set of phys. Signed-off-by: Viswas G <Viswas.G@microsemi.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-18scsi: pm80xx: ILA and inactive firmware version through sysfsViswas G
Added support to read ILA version and inactive firmware version from MPI configuration table and export through sysfs. Signed-off-by: Deepak Ukey <deepak.ukey@microsemi.com> Signed-off-by: Viswas G <Viswas.G@microsemi.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-18scsi: pm80xx: redefine sas_identify_frame structureViswas G
sas_identify structure defined by pm80xx doesn't have CRC field. So added a new sas_identify structure without CRC. Signed-off-by: Raj Dinesh <Raj.Dinesh@microsemi.com> Signed-off-by: Viswas G <Viswas.G@microsemi.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-18scsi: scsi_error: Handle power-on reset unit attentionHannes Reinecke
As per SAM there is a status precedence, with any sense code 29/XX taking second place just after an ACA ACTIVE status. Additionally, each target might prefer to not queue any unit attention conditions, but just report one. Due to the above, this will be that one with the highest precedence. This results in the sense code 29/XX effectively overwriting any other unit attention. Hence we should report the power-on reset to userland so that it can take appropriate action. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-18scsi: scsi_error: Do not retry illegal function errorHannes Reinecke
Hitachi USP-V returns 'ILLEGAL FUNCTION' when the internal staging mechanism encountered an error. These errors should not be retried on another path. [mkp: s/invalid/illegal/] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-18scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entryKurt Garloff
All EMC SYMMETRIX support REPORT_LUNS, even if configured to report SCSI-2 for whatever reason. Signed-off-by: Kurt Garloff <garloff@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17scsi: scsi_devinfo: Add TRY_VPD_PAGES to HITACHI OPEN-V blacklist entryHannes Reinecke
HITACHI is always supporting VPD pages, even though it's claiming to support SCSI Revision 3 only. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17scsi: scsi_devinfo: Add 'AIX VDASD' to blacklistHannes Reinecke
The AIX VDASD devices do support VPD pages, but implement only SPC. So set BLIST_TRY_VPD_PAGES to correctly display the VPD information in sysfs. [mkp: typo] Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17scsi: sg: Re-fix off by one in sg_fill_request_table()Ben Hutchings
Commit 109bade9c625 ("scsi: sg: use standard lists for sg_requests") introduced an off-by-one error in sg_ioctl(), which was fixed by commit bd46fc406b30 ("scsi: sg: off by one in sg_ioctl()"). Unfortunately commit 4759df905a47 ("scsi: sg: factor out sg_fill_request_table()") moved that code, and reintroduced the bug (perhaps due to a botched rebase). Fix it again. Fixes: 4759df905a47 ("scsi: sg: factor out sg_fill_request_table()") Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four mostly error leg fixes and one more important regression in a prior commit (the qla2xxx one)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: fc: check for rport presence in fc_block_scsi_eh scsi: qla2xxx: Fix uninitialized work element scsi: libiscsi: fix shifting of DID_REQUEUE host byte scsi: libfc: fix a deadlock in fc_rport_work scsi: fixup kernel warning during rmmod()
2017-10-17scsi: sd: change manage_start_stop to bool in sysfs interfaceweiping zhang
/sys/class/scsi_disk/0:2:0:0/manage_start_stop can be changed to 0 unexpectly by writing an invalid string. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17scsi: sd: change allow_restart to bool in sysfs interfaceweiping zhang
/sys/class/scsi_disk/0:2:0:0/allow_restart can be changed to 0 unexpectedly by writing an invalid string such as the following: echo asdf > /sys/class/scsi_disk/0:2:0:0/allow_restart Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17cxlflash: get rid of pointless access_ok()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-21 21:30:34 +0000