summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2014-05-19fnic: NoFIP solicitation frame in NONFIP mode and changed IO Throttle countHiral Shah
This patch contains following three minor fixes. 1) During Probe, fnic was sending FIP solicitation in Non FIP mode which is not expected, setting the internal fip state to Non FIP mode explicitly, avoids sending FIP frame. 2) When target goes offline, all outstanding IOs belong to the target will be terminated by driver, If the termination count is high, then it influences firmware responsiveness. To improve the responsiveness, default IO throttle count is reduced to 256. 3) Accessing Virtual Fabric Id (vfid) and fc_map of Fibre-Channel Forwarder(FCF) is invalid in fnic driver when Clear Virtual Link(CVL) is received prior to receiving flogi reject from switch. As CVL clears all FCFs. Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Anantha Tungarakodi <atungara@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Update the driver version to 8.07.00.08-k.Saurav Kashyap
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Remove wait for online from host reset handler.Chad Dupuis
This can block progress of the SCSI error handler thread and cause long I/O outages. Instead just fail immediately if another reset is going on or we are accessing flash memory. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Do logins from a chip reset in DPC thread instead of the error ↵Chad Dupuis
handler thread. Attempting to do any logins from the SCSI reset handler can lead to a deadlock scenario if a rport times out and the FC transport layer. Move doing any port logins to the DPC thread so as not to impede the progress of the SCSI error handler thread and avoid deadlock situations. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: ABTS cause double free of qla_tgt_cmd +.Quinn Tran
Fix double free problem within qla2xxx driver where current code prematurely free qla_tgt_cmd while firmware still has the command. When firmware release the command after abort, the code attempt a second free as part of command completion processing. When TCM start the free process, NULL pointer was hit. ------ WARNING: CPU: 8 PID: 43613 at lib/list_debug.c:62 __list_del_entry+0x82/0xd0() list_del corruption. next->prev should be ffff88082b5cfb08, but was 6b6b6b6b6b6b6b6b CPU: 8 PID: 43613 Comm: kworker/8:0 Tainted: GF W O 3.13.0-rc3-nab_t10dif+ #6 Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 Workqueue: events cache_reap 000000000000003e ffff88081b2e3c78 ffffffff815a051f 000000000000003e ffff88081b2e3cc8 ffff88081b2e3cb8 ffffffff8104fc2c 0000000000000000 ffff88082b5cfb00 ffff88081c788d00 ffff88082b5d7200 ffff88082b5d3080 Call Trace: [<ffffffff815a051f>] dump_stack+0x49/0x62 [<ffffffff8104fc2c>] warn_slowpath_common+0x8c/0xc0 [<ffffffff8104fd16>] warn_slowpath_fmt+0x46/0x50 [<ffffffff812b6592>] __list_del_entry+0x82/0xd0 [<ffffffff8106d48c>] process_one_work+0x12c/0x510 [<ffffffff8106d4d3>] ? process_one_work+0x173/0x510 [<ffffffff8106ebdf>] worker_thread+0x11f/0x3a0 [<ffffffff8106eac0>] ? manage_workers+0x170/0x170 [<ffffffff81074f26>] kthread+0xf6/0x120 [<ffffffff8109f103>] ? __lock_release+0x133/0x1b0 [<ffffffff81074e30>] ? __init_kthread_worker+0x70/0x70 [<ffffffff815aec2c>] ret_from_fork+0x7c/0xb0 [<ffffffff81074e30>] ? __init_kthread_worker+0x70/0x70 ---[ end trace dfc05c3f7caf8ebe ]--- BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff8106d391>] process_one_work+0x31/0x510 ------- Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: T10-Dif: add T10-PI supportQuinn Tran
Add support for T10-Dif for Target Mode to qla driver. The driver will look for firmware attribute that support this feature. When the feature is present, the capabilities will be report to TCM layer. Add CTIO CRC2 iocb to build T10-Dif commands. Add support routines to process good & error cases. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Remove mapped vp index iterator macro dead code.Himanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Add MBC option for fast SFP data access.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Fix beacon blink logic for ISP26xx/83xx.Himanshu Madani
Signed-off-by: Himanshu Madani <himanshu.madani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Don't check for firmware hung during the reset context for ISP82XX.Tej Prakash
Signed-off-by: Tej Prakash <tej.prakash@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Delay driver unload if there is any pending activity going on.Sawan Chandak
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: ISP27xx queue index shadow registers.Joe Carnuccio
For ISP27xx use the request/response queue index shadow registers to avoid directly access them on the PCI bus. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: ISP27xx firmware dump template spec updates (including T274).Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Reduce the time we wait for a command to complete during SCSI error ↵Chad Dupuis
handling. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Check the QLA8044_CRB_DRV_ACTIVE_INDEX register when we are not the ↵Hiral Patel
owner of the reset. Signed-off-by: Hiral Patel <hiral.patel@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Clear loop_id for ports that are marked lost during fabric scanning.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Adjust adapter reset routine to the changes in firmware ↵Armen Baloyan
specification for ISPFx00. Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Avoid escalating the SCSI error handler if the command is not found ↵Chad Dupuis
in firmware. If the firmware cannot find the command specified then return SUCCESS to the error handler so as not to needlessly escalate. Also cleanup the resources for the command since we cannot expect the original command to returned in interrupt context. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: IOCB data should be copied to I/O mem using memcpy_toio.Atul Deshmukh
Signed-off-by: Atul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: ISP8044 poll ipmdio bus timeout improvement.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Remove unnecessary printk_ratelimited from qla_nx2.cChad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Include <delay.h> file for msleep declartion in qla_nx2.c file.Atul Deshmukh
Signed-off-by: Atul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Use proper log message for flash lock failed error.Atul Deshmukh
Signed-off-by: Atul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Decrease pci access for response queue processing for ISPFX00.Armen Baloyan
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Change copyright year to 2014 in all the source files.Armen Baloyan
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Update entry type 270 to match spec update.Joe Carnuccio
Increment the address by 4 on each iteration. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Enable fw_dump_size for ISP8044.Hiral Patel
Signed-off-by: Hiral Patel <hiral.patel@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Introduce fw_dump_flag to track fw dump progress.Hiral Patel
Signed-off-by: Hiral Patel <hiral.patel@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Remove unnecessary delays from fw dump code path.Hiral Patel
Signed-off-by: Hiral Patel <hiral.patel@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Track the process when the ROM_LOCK failure happensHiral Patel
Signed-off-by: Hiral Patel <hiral.patel@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Correction to ISP27xx template entry types 256 and 258.Joe Carnuccio
The window address inserted into the dump should be have been incremented by 1 rather than 4. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Add ISP8044 serdes bsg interface.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Check for peg alive counter and clear any outstanding mailbox command.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Support of new firmware dump opcodes QLA8044_RDDFE(38), ↵Pratik Mohanty
QLA8044_RDMDIO(39),QLA8044_POLLWR(40). Signed-off-by: Pratik Mohanty <pratik.mohanty@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Allow the next firmware dump if the previous dump capture fails for ↵Saurav Kashyap
ISP8044. Signed-off-by: Giridhar Malavali <giridhar.malvali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Add pci device id 0x2271.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Issue abort command for outstanding commands during cleanup when ↵Giridhar Malavali
only firmware is alive. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Log when device state is moved to failed state.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Correct ISP83xx/ISP27xx mislogic in setting out_mb in ↵Joe Carnuccio
qla25xx_init_req_que(). Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Allow ISP83XX and ISP27XX both to write req_q_out register.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Correct operations for ISP27xx template types 270 and 271.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Do not schedule reset when one is already active when receiving an ↵Chad Dupuis
invalid status handle. If an adapter reset is already in progress, do not schedule another one when we receive an invalid status handle. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Wait for reset completion without lock for ISPFX00.Saurav Kashyap
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19megaraid_sas: fix a small problem when reading state value from hwTomas Henzl
When the driver reads state values from the hw it might happen that different values are read in subsequent reads and this can cause problems, this may lead to a timeout in this function and a non working adapter. Cc: Adam Radford <aradford@gmail.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Shintaro Minemoto <fj3207hq@aa.jp.fujitsu.com> Acked-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19sd: medium access timeout counter fails to resetDavid Jeffery
There is an error with the medium access timeout feature of the sd driver. The sdkp->medium_access_timed_out value is reset to zero in sd_done() in the wrong place. Currently it is reset to zero only when a command returns sense data. This can result in cases where the medium access check falsely triggers from timed out commands which are hours or days apart. For example, an I/O command times out and is aborted. It then retries and succeeds. But with no sense data generated and returned, the medium_access_timed_out value is not reset. If no sd command returns sense data, then the next command to time out (however far in time from the first failure) will trigger the medium access timeout and put the device offline. The resetting of sdkp->medium_access_timed_out should occur before the check for sense data. To reproduce using scsi_debug, use SCSI_DEBUG_OPT_TIMEOUT or SCSI_DEBUG_OPT_MAC_TIMEOUT to force an I/O command to timeout. Then, remove the opt value so the I/O will succeed on retry. Perform more I/O as desired. Finally, repeat the process to make a new I/O command time out. Without the patch, the device will be marked offline even though many I/O commands have succeeded between the 2 instances of timed out commands. Signed-off-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19scsi: set correct completion code in scsi_send_eh_cmnd()Hannes Reinecke
->queuecommand returns '0' for successful command submission, so we need to set the correct SCSI midlayer return value when calling scsi_log_completion(). Signed-off-by: Hannes Reinecke <hare@suse.de> Reported-by: Robert Elliott <elliott@hp.com> Cc: Stephen Cameron <scameron@beardog.cce.hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19scsi: handle command allocation failure in scsi_reset_providerChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-05-19scsi: reintroduce scsi_driver.init_commandChristoph Hellwig
Instead of letting the ULD play games with the prep_fn move back to the model of a central prep_fn with a callback to the ULD. This already cleans up and shortens the code by itself, and will be required to properly support blk-mq in the SCSI midlayer. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-05-19scsi: remove scsi_end_requestChristoph Hellwig
By folding scsi_end_request into its only caller we can significantly clean up the completion logic. We can use simple goto labels now to only have a single place to finish or requeue command there instead of the previous convoluted logic. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-05-19scsi: explicitly release bidi buffersChristoph Hellwig
Instead of trying to guess when we have a BIDI buffer in scsi_release_buffers add a function to explicitly free the BIDI ressoures in the one place that handles them. This avoids needing a special __scsi_release_buffers for the case where we already have freed the request as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
generated by cgit (git 2.34.1) at 2025-09-26 21:00:53 +0000