summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2006-04-11[PATCH] sata_sil24: use ata_wait_register()Tejun Heo
Replace hard-coded waiting loops in sata_sil24 to ata_wait_register(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11[PATCH] ahci: use ata_wait_register()Tejun Heo
Replace ahci_poll_register() with ata_wait_register(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11[PATCH] libata: implement ata_wait_register()Tejun Heo
As waiting for some register bits to change seems to be a common operation shared by some controllers, implement helper function ata_wait_register(). This function also takes care of register write flushing. Note that the condition is inverted, the wait is over when the masked value does NOT match @val. As we're waiting for bits to change, this test is more powerful and allows the function to be used in more places. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11[PATCH] sata_sil24: better error message from softresetTejun Heo
Improve softreset error message. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11[PATCH] sata_sil24: fix timeout calculation in sil24_softresetTejun Heo
sil24_softreset calculated timeout by adding ATA_TMOUT_BOOT * HZ to jiffies; however, as ATA_TMOUT_BOOT is already in jiffies, multiplying by HZ makes the value way off. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11[PATCH] libata: make reset methods complain when they failTejun Heo
Make reset methods complain loud when they fail. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11[PATCH] libata: kill @verbose from ata_reset_fn_tTejun Heo
@verbose was added to ata_reset_fn_t because AHCI complained during probing if no device was attached to the port. However, muting failure message isn't the correct approach. Reset methods are responsible for detecting no device condition and finishing successfully. Now that AHCI softreset is fixed, kill @verbose. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11[PATCH] libata: set default cbl in probeinitTejun Heo
Make setting CBL type responsibility of probeinit. This allows using only ap->cbl == ATA_CBL_SATA test in all other parts. Without this, ata_down_sata_spd_limit() doesn't work during probe reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11libata: Add helper ata_shost_to_port()Jeff Garzik
2006-04-11libata: Fix EH merge difference between this branch and upstream.Jeff Garzik
2006-04-11Merge branch 'master'Jeff Garzik
Conflicts: drivers/scsi/libata-scsi.c include/linux/libata.h
2006-04-11[PATCH] 3ware: kmap_atomic() fixAndrew Morton
We must disable local IRQs while holding KM_IRQ0 or KM_IRQ1. Otherwise, an IRQ handler could use those kmap slots while this code is using them, resulting in memory corruption. Thanks to Nick Orlov <bugfixer@list.ru> for reporting. Cc: <linuxraid@amcc.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-10[libata] sata_mv: fix can_queue line accidentally removed in scsi-eh patchJeff Garzik
2006-04-10[PATCH] move ->eh_strategy_handler to the transport classChristoph Hellwig
Overriding the whole EH code is a per-transport, not per-host thing. Move ->eh_strategy_handler to the transport class, same as ->eh_timed_out. Downside is that scsi_host_alloc can't check for the total lack of EH anymore, but the transition period from old EH where we needed it is long gone already. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-04Merge branch 'upstream'Jeff Garzik
2006-04-04[PATCH] ahci: do not fail softreset if PHY reports no deviceTejun Heo
All softreset methods are responsible for detecting device presence and succeed softreset in such cases. AHCI didn't use to check for device presence before proceeding with softreset and this caused unnecessary reset retrials during probing. This patch adds presence detection to AHCI softreset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-04[PATCH] libata: convert ATAPI_ENABLE_DMADIR to module parameterAlbert Lee
Convert the ATAPI_ENABLE_DMADIR compile time option needed by some SATA-PATA bridge to runtime module parameter. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-04[PATCH] libata-dev: irq-pio minor fix 2Albert Lee
irq-pio minor fix 2: - Use qc as data for ata_pio_task(). Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-04[PATCH] libata-dev: irq-pio minor fixAlbert Lee
irq-pio minor fix: - remove the redundant hsm_task_state = HSM_ST_IDLE - add devno to printk() as done in upstream Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-04Merge branch 'upstream'Jeff Garzik
2006-04-04Merge branch 'master'Jeff Garzik
2006-04-02Merge branch 'upstream'Jeff Garzik
2006-04-02[libata] bump versionsJeff Garzik
2006-04-02[libata] kill bogus cut-n-pasted comments in three driversJeff Garzik
2006-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (48 commits) Documentation: fix minor kernel-doc warnings BUG_ON() Conversion in drivers/net/ BUG_ON() Conversion in drivers/s390/net/lcs.c BUG_ON() Conversion in mm/slab.c BUG_ON() Conversion in mm/highmem.c BUG_ON() Conversion in kernel/signal.c BUG_ON() Conversion in kernel/signal.c BUG_ON() Conversion in kernel/ptrace.c BUG_ON() Conversion in ipc/shm.c BUG_ON() Conversion in fs/freevxfs/ BUG_ON() Conversion in fs/udf/ BUG_ON() Conversion in fs/sysv/ BUG_ON() Conversion in fs/inode.c BUG_ON() Conversion in fs/fcntl.c BUG_ON() Conversion in fs/dquot.c BUG_ON() Conversion in md/raid10.c BUG_ON() Conversion in md/raid6main.c BUG_ON() Conversion in md/raid5.c Fix minor documentation typo BFP->BPF in Documentation/networking/tuntap.txt ...
2006-04-02Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (33 commits) [PATCH] pcmcia: declare pccard_iodyn_ops (fix m8xx_pcmcia.c compilation error) [PATCH] pcmcia: fix pcmcia_device_remove oops [PATCH] pcmcia: Add support for Possio GCC AKA PCMCIA Siemens MC45 [PATCH] pcmcia: pseudo device handling update [PATCH] pcmcia: convert DEV_OK to pcmcia_dev_present [PATCH] pcmcia: use bitfield instead of p_state and state [PATCH] pcmcia: remove unused p_dev->state flags [PATCH] pcmcia: make pcmcia_release_{io,irq} static [PATCH] pcmcia: add return value to _config() functions [PATCH] pcmcia: remove dev_link_t and client_handle_t indirection [PATCH] pcmcia: embed dev_link_t into struct pcmcia_device [PATCH] pcmcia: rename pcmcia_device.state [PATCH] pcmcia: remove unneeded Vcc pseudo setting [PATCH] pcmcia: remove export of pcmcia_release_configuration [PATCH] pcmcia: default suspend and resume handling [PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irq [PATCH] pcmcia: add pcmcia_disable_device [PATCH] serial_cs: add Merlin U630 IDs [PATCH] pcmcia: AT91RM9200 Compact Flash driver [PATCH] pcmcia: socket.functions starts with 1 ...
2006-04-02Merge branch 'upstream'Jeff Garzik
2006-04-02[PATCH] libata: print SControl in SATA link status info messageTejun Heo
Now that libata mangles with SControl, it's helpful to print out SControl in link status message. Add it. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[libata] irq-pio: Fix merge mistakeJeff Garzik
2006-04-02Merge branch 'upstream'Jeff Garzik
Conflicts: drivers/scsi/libata-core.c drivers/scsi/pdc_adma.c drivers/scsi/sata_mv.c drivers/scsi/sata_nv.c drivers/scsi/sata_promise.c drivers/scsi/sata_qstor.c drivers/scsi/sata_sx4.c drivers/scsi/sata_vsc.c include/linux/libata.h
2006-04-02[PATCH] libata: make some libata-core routines externTejun Heo
Make libata-core routines which will be used by EH implementation extern. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: separate out libata-eh.cTejun Heo
A lot of EH codes are about to be added to libata. Separate out libata-eh.c. ata_scsi_timed_out(), ata_scsi_error(), ata_qc_timeout(), ata_eng_timeout(), ata_eh_qc_complete() and ata_eh_qc_retry() are moved. No code is changed by this patch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: dec scmd->retries for qcs with zero err_maskTejun Heo
qcs might get retried because of unrelated failure. e.g. NCQ command failure causes the whole command set to be aborted. Decrement scmd->retries for such retrials to avoid unnecessarily failing commands. Note that scmd->retries will be incremented the first time. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: add @cdb to ata_exec_internal()Tejun Heo
Add @cdb to ata_exec_internal(). It will be used by new EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: don't read TF directly from sense generation functionsTejun Heo
TF register might not be directly accessible depending on errors. e.g. TF of failed NCQ command is in log page 10h. Make reading TF responsibility of error handlers. For the current EH, simply push TF reading into qc completion functions as they are practically part of EH. New EH will fill qc->tf with status registers before complting qcs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: always generate sense if qc->err_mask is non-zeroTejun Heo
Current sense generation code does not generate sense error if status register value doesn't indicate error condition. However, LLDD's may indicate errors which 't show up in status register. Completing such qc's without generating sense results in successful completion of failed commands. Invoke ata_to_sense_error() regardless of status register if qc->err_mask is not zero such that ata_to_sense_error() generates default sense error. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: pass qc around intead of ap during PIOTejun Heo
The current code passes pointer to ap around and repeatedly performs ata_qc_from_tag() to access the ongoing qc. This is unnatural and makes EH synchronization cumbersome. Make PIO codes deal with qc instead of ap. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: add ATA_QCFLAG_IOTejun Heo
Add a new qc flag ATA_QCFLAG_IO. This flag gets set for normal IO commands originating from SCSI midlayer. This information will be used by EH to determine transfer speed reconfiguration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: clear ATA_DFLAG_PIO before setting itTejun Heo
ata_dev_set_mode() is now responsible for managing ATA_DFLAG_PIO. Clear it before setting it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: clear only affected flags during ata_dev_configure()Tejun Heo
ata_dev_configure() should not clear dynamic device flags determined elsewhere. Lower eight bits are reserved for feature flags, define ATA_DFLAG_CFG_MASK and clear only those bits before configuring device. Without this patch, ATA_DFLAG_PIO gets turned off during revalidation making PIO mode unuseable. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLEDTejun Heo
Rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED for consistency. (ATA_FLAG_* are always about ports). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: ATA_FLAG_IN_EH is not used, kill itTejun Heo
Kill unused flag ATA_FLAG_IN_EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: ata_dev_revalidate() printk updateTejun Heo
Make sure ata_dev_revalidate() complains on failures and kill revalidation failure message printed from ata_dev_set_mode(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: report device number when PIO failsTejun Heo
Report device number on PIO failure. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: consider disabled devices in ata_dev_xfermask()Tejun Heo
ata_bus_probe() now marks failed devices properly and leaves meaningful transfer mode masks. This patch makes ata_dev_xfermask() consider disable devices when determining PIO mode to avoid violating device selection timing. While at it, move port-wide resttriction out of device iteration loop and try to make the function look a bit prettier. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: improve ata_bus_probe()Tejun Heo
Improve ata_bus_probe() such that configuration failures are handled better. Each device is given ATA_PROBE_MAX_TRIES chances, but any non-transient error (revalidation failure with -ENODEV, configuration failure with -EINVAL...) disables the device directly. Any IO error results in SATA PHY speed down and ata_set_mode() failure lowers transfer mode. The last try always puts a device into PIO-0. After each failure, the whole port is reset to make sure that the controller and all the devices are in a known and stable state. The reset also applies SATA SPD configuration if necessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: implement ata_down_xfermask_limit()Tejun Heo
Implement ata_down_xfermask_limit(). This function manipulates @dev->pio/mwdma/udma_mask such that the next lower transfer mode is selected. This will be used to improve ata_bus_probe() failure handling and later by EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: add 5s sleep between resetsTejun Heo
Some devices react badly if resets are performed back-to-back. Give devices some time to breath and tell user that we're taking a nap. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: use SATA speed down in ata_drive_probe_reset()Tejun Heo
Make ata_drive_probe_reset() use SATA SPD configuration. Hardreset will be force if speed renegotiation is necessary. Also, if a hardreset fails, PHY speed is stepped down and hardreset is retried until the lowest speed is reached. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[PATCH] libata: implement ap->sata_spd_limit and helpersTejun Heo
ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit (git 2.34.1) at 2025-09-23 23:31:31 +0000