Age | Commit message (Collapse) | Author |
|
Add support for Fabric-Device Management Interface (FDMI) by introducing
PCI device IDs for Cisco Hardware.
Introduce a module parameter to enable/disable FDMI support.
Integrate support for FDMI.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406110734.p2v8dq9v-lkp@intel.com/
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Co-developed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Signed-off-by: Gian Carlo Boffa <gcboffa@cisco.com>
Co-developed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Arun Easi <aeasi@cisco.com>
Signed-off-by: Arun Easi <aeasi@cisco.com>
Co-developed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20241212020312.4786-8-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add model IDs for Cisco VIC.
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Co-developed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Signed-off-by: Gian Carlo Boffa <gcboffa@cisco.com>
Co-developed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Arun Easi <aeasi@cisco.com>
Signed-off-by: Arun Easi <aeasi@cisco.com>
Co-developed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20241212020312.4786-7-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for unsolicited requests and responses.
Add support to accept and reject frames.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409291705.MugERX98-lkp@intel.com/
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Co-developed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Signed-off-by: Gian Carlo Boffa <gcboffa@cisco.com>
Co-developed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Arun Easi <aeasi@cisco.com>
Signed-off-by: Arun Easi <aeasi@cisco.com>
Co-developed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20241212020312.4786-6-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for target based solicited requests and responses.
Add support for tport definitions and processing.
Add support for restarting the IT nexus.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406120146.xchlZbqX-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202412081427.SlsFIJY4-lkp@intel.com/
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Co-developed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Signed-off-by: Gian Carlo Boffa <gcboffa@cisco.com>
Co-developed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Arun Easi <aeasi@cisco.com>
Signed-off-by: Arun Easi <aeasi@cisco.com>
Co-developed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20241212020312.4786-5-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add fdls_disc.c to support fabric based solicited requests and responses.
Clean up obsolete code but keep the function template so as to not break
compilation.
Remove duplicate definitions from header files.
Modify definitions of data members.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406112309.8GiDUvIM-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202406120201.VakI9Dly-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202412080837.2JU0r2Ny-lkp@intel.com/
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Co-developed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Signed-off-by: Gian Carlo Boffa <gcboffa@cisco.com>
Co-developed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Arun Easi <aeasi@cisco.com>
Signed-off-by: Arun Easi <aeasi@cisco.com>
Co-developed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20241212020312.4786-4-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add headers and definitions for FDLS (Fabric Discovery and Login Services).
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Co-developed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Signed-off-by: Gian Carlo Boffa <gcboffa@cisco.com>
Co-developed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Arun Easi <aeasi@cisco.com>
Signed-off-by: Arun Easi <aeasi@cisco.com>
Co-developed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20241212020312.4786-3-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Sending host information to shost_printk() prior to host initialization in
fnic is unnecessary. Replace shost_printk() and a printk() prior to this
initialization with dev_info() and dev_err() accordingly.
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20241212020312.4786-2-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Skip the reset settle delay during error handling since the scsi_debug
driver doesn't need this delay.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241216184852.2626339-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Thomas Weißschuh <linux@weissschuh.net> says:
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-0-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-11-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-10-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-9-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-8-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-7-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-6-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-5-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-4-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-3-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-2-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-1-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.7
This patch set contains fixes related to smatch, clean up of obsolete code
and global spinlocks, changes to ADISC and LS_RJT handling, and support for
large fw object reads used in proprietary applications.
The patches were cut against Martin's 6.14/scsi-queue tree.
Link: https://lore.kernel.org/r/20241212233309.71356-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update copyrights to 2024 for files modified in the 14.4.0.7 patch set.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-11-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update lpfc version to 14.4.0.7
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-10-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Current lpfc bsg implementation allows a maximum fw read object size of
30KB. Implementation and support for read object mailbox commands for fw
objects larger than 30KB are now required for proprietary applications.
Thus, update the lpfc_sli_config_emb0_subsys structure and its associated
submission and completion paths to accommodate for an alternative form of
read object command that supports large fw objects.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are unused fields in mailbox commands that query for firmware
configuration information. As such, update the struct definitions by
correcting the name of certain fields and removing the unused fields.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In attempt to reduce the amount of unnecessary ndlp->lock acquisitions in
the lpfc driver, change save_flags into an unsigned long bitmask and use
clear_bit/test_bit bitwise atomic APIs instead of reliance on ndlp->lock
for synchronization.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When a LS_RJT is received with reason explanation authentication required,
current driver logic is to retry the PLOGI up to 48 times. In the worse
case scenario, 48 retries can take longer than dev_loss_tmo and if there is
an RSCN received indicating an authentication requirement change, the
driver may miss processing it. Fix by adding logic to specifically handle
reason explanation authentication required and set the max retry count to 8
times.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In lpfc_check_adisc, remove the requirement that the ndlp object must have
been RPI registered. Whether or not the ndlp is RPI registered is
unrelated to verifying that the received ADISC is intended for that ndlp
rport object.
After ADISC receipt, there's no need to put the ndlp state into NPR. Let
the cmpl routines from the actions taken earlier in ADISC handling set the
proper ndlp state.
Also, refactor when a RESUME_RPI mailbox command should be sent. It should
only be sent if the RPI registered flag is set.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove the NLP_TARGET_REMOVE flag as its usage is obsolete. The current
framework is to rely on the lpfc_dev_loss_tmo_callbk from upper layer to
notify final ndlp kref release. There's no need to specifically set
NLP_EVT_DEVICE_RM when a LOGO completes. The dev_loss_tmo_callbk is
responsible for the final kref put.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Qualify setting the REG_FCFI MAM field to FCoE adapters only by keying off
HBA_FCOE_MODE phba->hba_flag. The field is not applicable to FC adapters.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix smatch warning by redefining local variable memory_flags from int to
gfp_t.
lpfc_scsi.c: warning: incorrect type in argument 2 (different base types)
lpfc_scsi.c: expected restricted gfp_t [usertype] gfp_mask
lpfc_scsi.c: got int memory_flags
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
* reported by Coverity ID 1602240
* ldev_info is always true, therefore the branch statement is never called.
Fixes: 081ff398c56c ("scsi: myrb: Add Mylex RAID controller (block interface)")
Cc: Hannes Reinecke <hare@kernel.org>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ariel Otilibili <ariel.otilibili-anieli@eurecom.fr>
Link: https://lore.kernel.org/r/20241213225852.62741-2-ariel.otilibili-anieli@eurecom.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the code does:
if (x == 0) {
x &= ~0x3;
x |= 0x1;
}
Zeroing bits 0 and 1 of a variable that is 0 is not necessary. So directly
set the variable to 1.
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20241212221817.78940-2-pmenzel@molgen.mpg.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Linux 5.15 logs the error below
mpt3sas_cm0: overriding NVDATA EEDPTagMode setting
on a Dell PowerEdge T440 with the card below.
5e:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS3008 PCI-Express Fusion-MPT SAS-3 [1000:0097] (rev 02)
It’s not clear to a user what this error is about. As a first step to
improve this, add the values to the error message.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20241212221817.78940-1-pmenzel@molgen.mpg.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Renamed ESP_CONGIG4_TEST to ESP_CONFIG4_TEST
Signed-off-by: Siddharth Menon <simeddon@gmail.com>
Link: https://lore.kernel.org/r/20241210040202.11112-1-simeddon@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
isci_remote_device_reset_complete() last use was removed in 2012 by commit
14aaa9f0a318 ("isci: Redesign device suspension, abort, cleanup.")
Remove it.
It was the last user of sci_remote_device_reset_complete().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241223180218.50426-1-linux@treblig.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
iscsi_create_session() last use was removed in 2008 by commit 756135215ec7
("[SCSI] iscsi: remove session and host binding in libiscsi")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241223180110.50266-1-linux@treblig.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the proper API instead of open coding it.
However it looks like qedi_percpu_io_thread() kthread could be replaced by
the use of a high prio workqueue instead.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20241211154035.75565-6-frederic@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the proper API instead of open coding it.
However it looks like bnx2i_percpu_io_thread() kthread could be replaced by
the use of a high prio workqueue instead.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20241211154035.75565-5-frederic@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the proper API instead of open coding it.
However it looks like bnx2fc_percpu_io_thread() kthread could be replaced
by the use of a high prio workqueue instead.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20241211154035.75565-4-frederic@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
BLK_MQ_F_SHOULD_MERGE is set for all tag_sets except those that purely
process passthrough commands (bsg-lib, ufs tmf, various nvme admin
queues) and thus don't even check the flag. Remove it to simplify the
driver interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241219060214.1928848-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace all users of blk_mq_virtio_map_queues with the more generic
blk_mq_map_hw_queues. This in preparation to retire
blk_mq_virtio_map_queues.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20241202-refactor-blk-affinity-helpers-v6-7-27211e9c2cd5@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace all users of blk_mq_pci_map_queues with the more generic
blk_mq_map_hw_queues. This in preparation to retire
blk_mq_pci_map_queues.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20241202-refactor-blk-affinity-helpers-v6-5-27211e9c2cd5@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for sending user-meta buffer. Set tags to be checked
using flags specified by user/block-layer.
With this change, BIP_CTRL_NOCHECK becomes unused. Remove it.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241128112240.8867-10-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We intend to remove the cxlflash driver in an upcoming release. It is
already marked as Obsolete in MAINTAINERS.
The cxlflash driver has received minimal maintenance for some time, and
the CAPI Flash hardware that uses it is no longer commercially available.
Add a warning message on probe and change Kconfig to label the driver as
deprecated and not build the driver by default.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241210054055.144813-3-ajd@linux.ibm.com
|
|
'struct pci_device_id' is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
70237 9137 320 79694 1374e drivers/scsi/3w-9xxx.o
After:
=====
text data bss dec hex filename
70461 8913 320 79694 1374e drivers/scsi/3w-9xxx.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/fc61b1946488c1ea8f7a17a06cf40fbd05dcc6de.1733590049.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Current code allocates the stor_chns array with size num_possible_cpus().
This code assumes cpu_possible_mask is dense, which is not true in the
general case per [1]. If cpu_possible_mask is sparse, the array might be
indexed by a value beyond the size of the array.
However, the configurations that Hyper-V provides to guest VMs on x86 and
ARM64 hardware, in combination with how architecture specific code assigns
Linux CPU numbers, *does* always produce a dense cpu_possible_mask. So the
dense assumption is not currently causing failures. But for robustness
against future changes in how cpu_possible_mask is populated, update the
code to no longer assume dense.
The correct approach is to allocate and initialize the array using size
"nr_cpu_ids". While this leaves unused array entries corresponding to holes
in cpu_possible_mask, the holes are assumed to be minimal and hence the
amount of memory wasted by unused entries is minimal.
[1] https://lore.kernel.org/lkml/SN6PR02MB4157210CC36B2593F8572E5ED4692@SN6PR02MB4157.namprd02.prod.outlook.com/
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20241003035333.49261-5-mhklinux@outlook.com
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_mid_low_api.rst refers to scsi_register() and scsi_unregister() but
these functions don't exist. They have been replaced by more meaningful
names.
Update one driver (megaraid_mbox.c) that uses "scsi_unregister" in a
warning message. Update scsi_mid_low_api.rst to eliminate references to
scsi_register() and scsi_unregister().
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20241205041839.164404-1-rdunlap@infradead.org
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Cc: megaraidlinux.pdl@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
The text "slave_" in multiple function names does not make it clear what
the purpose of these functions is. Hence this patch series that renames all
SCSI functions that have the word "slave" in their function name. Please
consider this patch series for the next merge window.
Thanks,
Bart.
Link: https://lore.kernel.org/r/20241022180839.2712439-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Now that all SCSI drivers have been converted from .slave_configure() to
.sdev_configure(), remove support for .slave_configure() from the SCSI
core.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|