summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2023-07-23scsi: qla2xxx: Fix session hang in gnlQuinn Tran
Connection does not resume after a host reset / chip reset. The cause of the blockage is due to the FCF_ASYNC_ACTIVE left on. The gnl command was interrupted by the chip reset. On exiting the command, this flag should be turn off to allow relogin to reoccur. Clear this flag to prevent blockage. Cc: stable@vger.kernel.org Fixes: 17e64648aa47 ("scsi: qla2xxx: Correct fcport flags handling") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230714070104.40052-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: qla2xxx: Fix erroneous link up failureQuinn Tran
Link up failure occurred where driver failed to see certain events from FW indicating link up (AEN 8011) and fabric login completion (AEN 8014). Without these 2 events, driver would not proceed forward to scan the fabric. The cause of this is due to delay in the receive of interrupt for Mailbox 60 that causes qla to set the fw_started flag late. The late setting of this flag causes other interrupts to be dropped. These dropped interrupts happen to be the link up (AEN 8011) and fabric login completion (AEN 8014). Set fw_started flag early to prevent interrupts being dropped. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230714070104.40052-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: qla2xxx: Fix command flush during TMFQuinn Tran
For each TMF request, driver iterates through each qpair and flushes commands associated to the TMF. At the end of the qpair flush, a Marker is used to complete the flush transaction. This process was repeated for each qpair. The multiple flush and marker for this TMF request seems to cause confusion for FW. Instead, 1 flush is sent to FW. Driver would wait for FW to go through all the I/Os on each qpair to be read then return. Driver then closes out the transaction with a Marker. Cc: stable@vger.kernel.org Fixes: d90171dd0da5 ("scsi: qla2xxx: Multi-que support for TMF") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230714070104.40052-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: qla2xxx: Limit TMF to 8 per functionQuinn Tran
Per FW recommendation, 8 TMF's can be outstanding for each function. Previously, it allowed 8 per target. Limit TMF to 8 per function. Cc: stable@vger.kernel.org Fixes: 6a87679626b5 ("scsi: qla2xxx: Fix task management cmd fail due to unavailable resource") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230714070104.40052-4-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: qla2xxx: Adjust IOCB resource on qpair createQuinn Tran
During NVMe queue creation, a new qpair is created. FW resource limit needs to be re-adjusted to take into account the new qpair. Otherwise, NVMe command can not go through. This issue was discovered while testing/forcing FW execution to fail at load time. Add call to readjust IOCB and exchange limit. In addition, get FW state command and require FW to be running. Otherwise, error is generated. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230714070104.40052-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: qla2xxx: Fix deletion race conditionQuinn Tran
System crash when using debug kernel due to link list corruption. The cause of the link list corruption is due to session deletion was allowed to queue up twice. Here's the internal trace that show the same port was allowed to double queue for deletion on different cpu. 20808683956 015 qla2xxx [0000:13:00.1]-e801:4: Scheduling sess ffff93ebf9306800 for deletion 50:06:0e:80:12:48:ff:50 fc4_type 1 20808683957 027 qla2xxx [0000:13:00.1]-e801:4: Scheduling sess ffff93ebf9306800 for deletion 50:06:0e:80:12:48:ff:50 fc4_type 1 Move the clearing/setting of deleted flag lock. Cc: stable@vger.kernel.org Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230714070104.40052-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23Merge patch series "lpfc: Update lpfc to revision 14.2.0.14"Martin K. Petersen
Justin Tee <justintee8345@gmail.com> says: Update lpfc to revision 14.2.0.14 This patch set contains logging improvements, kref handling fixes, discovery bug fixes, and refactoring of repeated code. The patches were cut against Martin's 6.6/scsi-queue tree. Link: https://lore.kernel.org/r/20230712180522.112722-1-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: lpfc: Copyright updates for 14.2.0.14 patchesJustin Tee
Update copyrights to 2023 for files modified in the 14.2.0.14 patch set. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230712180522.112722-13-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: lpfc: Update lpfc version to 14.2.0.14Justin Tee
Update lpfc version to 14.2.0.14 Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230712180522.112722-12-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: lpfc: Clean up SLI-4 sysfs resource reportingJustin Tee
Currently, we have dated logic to work around the differences between SLI-4 and SLI-3 resource reporting through sysfs. Leave the SLI-3 path untouched, but for SLI4 path, retrieve resource values from the phba->sli4_hba->max_cfg_param structure. Max values are populated during ACQE events right after READ_CONFIG mbox cmd is sent. Instead of the dated subtraction logic, used resource calculation is directly fed into sysfs for display. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230712180522.112722-11-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: lpfc: Refactor cpu affinity assignment pathsJustin Tee
During initialization, a lot of the same logic is used on MSI-X vector CPU affinity assignment. Create a lpfc_next_present_cpu() helper routine, and apply its usage for refactoring purposes. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230712180522.112722-10-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: lpfc: Abort outstanding ELS cmds when mailbox timeout error is detectedJustin Tee
A mailbox timeout error usually indicates something has gone wrong, and a follow up reset of the HBA is a typical recovery mechanism. Introduce a MBX_TMO_ERR flag to detect such cases and have lpfc_els_flush_cmd abort ELS commands if the MBX_TMO_ERR flag condition was set. This ensures all of the registered SGL resources meant for ELS traffic are not leaked after an HBA reset. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230712180522.112722-9-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: lpfc: Make fabric zone discovery more robust when handling unsolicited ↵Justin Tee
LOGO This patch provides better target rport recovery when a target rport is running in initiator mode to discover the fabric. Such a target will issue a LOGO before switching back to strict target mode and changes are made to recover the login. Log messages are also updated accordingly. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230712180522.112722-8-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: lpfc: Set Establish Image Pair service parameter only for Target FunctionsJustin Tee
Previously, Establish Image Pair was set in all PRLI_ACC responses regardless if the received PRLI was from an initiator or target function. Specific target vendors that can operate in both initiator and target mode, may view the PRLI_ACC with Establish Image Pair set as an invalid service parameter when operating in initiator only mode. This causes discovery issues later when the target switches on its target mode function. Revise logic that determines an rport's role as an initiator or target and set the Establish Image Pair service parameter bit only if the Target Function bit is set. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230712180522.112722-7-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: lpfc: Revise ndlp kref handling for dev_loss_tmo_callbk and lpfc_drop_nodeJustin Tee
The ndlp kref count implementation in lpfc_dev_loss_tmo_callbk() removes the initial node reference when a vport is unloading. When lpfc_cleanup() sends a DEVICE_RM event and is in NPR state, the driver calls lpfc_drop_node(). Subsequently, lpfc_drop_node() also removes an ndlp kref thinking it is the initial reference. This unintentionally introduces an extra kref decrement on the ndlp object. Fix by using the NLP_DROPPED node flag in lpfc_dev_loss_tmo_callbk() and lpfc_drop_node() to coordinate the removal of the initial node reference. In lpfc_dev_loss_tmo_callbk(), remove the SCSI transport reference provided the node is registered in the dev_loss context because the driver cannot call the SCSI transport in dev_loss context or afterwards. And, have lpfc_drop_node() not remove a reference if another thread is acting or has already acted on it. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230712180522.112722-6-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: lpfc: Qualify ndlp discovery state when processing RSCNJustin Tee
Conditionalize when to put an ndlp into recovery mode when processing RSCNs. As long as an ndlp state is beyond a PLOGI issue and has been mapped to a transport layer before, the ndlp qualifies to be put into recovery mode. Otherwise, treat the ndlp rport normally through the discovery engine. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230712180522.112722-5-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: lpfc: Remove extra ndlp kref decrement in FLOGI cmpl for loop topologyJustin Tee
In lpfc_cmpl_els_flogi(), the return out: label decrements the ndlp kref signaling that FLOGI processing on the ndlp is complete. In loop topology path, there is an unnecessary ndlp put because it also branches to the out: label. This also signals ndlp usage completion too soon. As such, remove the extra lpfc_nlp_put() when in loop topology. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230712180522.112722-4-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: lpfc: Simplify fcp_abort transport callback log messageJustin Tee
The driver is reaching into a nvme_fc_cmd_iu ptr that belongs to the transport during an abort. This could cause an unintentional ptr dereference into memory that the driver does not own. Since the nvme_fc_cmd_iu ptr was for logging purposes only, simplify the log message such that the nvme_fc_cmd_iu reference is no longer needed. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230712180522.112722-3-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: lpfc: Pull out fw diagnostic dump log message from driver's trace bufferJustin Tee
The firmware diagnostic dump log message does not need to be a part of the driver's log trace buffer because it is an expected user triggered event. Change LOG_TRACE_EVENT verbose flag to LOG_SLI. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230712180522.112722-2-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: sun_esp: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230714175052.4066150-1-robh@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: qlogicpti: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230714175052.4066150-1-robh@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: storvsc: Limit max_sectors for virtual Fibre Channel devicesMichael Kelley
The Hyper-V host is queried to get the max transfer size that it supports, and this value is used to set max_sectors for the synthetic SCSI controller. However, this max transfer size may be too large for virtual Fibre Channel devices, which are limited to 512 Kbytes. If a larger transfer size is used with a vFC device, Hyper-V always returns an error, and storvsc logs a message like this where the SRB status and SCSI status are both zero: hv_storvsc <GUID>: tag#197 cmd 0x8a status: scsi 0x0 srb 0x0 hv 0xc0000001 Add logic to limit the max transfer size to 512 Kbytes for vFC devices. Fixes: 1d3e0980782f ("scsi: storvsc: Correct reporting of Hyper-V I/O size limits") Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1689887102-32806-1-git-send-email-mikelley@microsoft.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: hisi_sas: Delete unused lock in hisi_sas_port_notify_formed()Yihang Li
Currently spinlock hisi_hba->lock is used by both interrupts and threads which requires the use of spin_lock_irqsave()/spin_unlock_irqrestore(). However, some places still use spin_lock()/spin_unlock(). Reviewing the code revealed that it is unnecessary to use hisi_hba->lock in the function hisi_sas_port_notify_formed() which is the only place that uses the spinlock in interrupt context. So delete unused lock in hisi_sas_port_notify_formed(). Signed-off-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1689045300-44318-4-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: hisi_sas: Block requests before a debugfs snapshotYihang Li
When FIO and debugfs snapshot occur concurrently, some SATA I/Os are failed to return to the upper layer due to the setting of HISI_SAS_REJECT_CMD_BIT. Then the SCSI layer invokes the error processing thread. However, sas_ata_hard_reset() in EH also fails to be reset due to the setting of HISI_SAS_REJECT_CMD_BIT. As a result, the device is disabled. Calling scsi_block_requests() in the front of a debugfs snapshot and wait command complete before setting HISI_SAS_REJECT_CMD_BIT to avoid SATA I/O failures. Signed-off-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1689045300-44318-3-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-23scsi: hisi_sas: Fix normally completed I/O analysed as failedXingui Yang
The PIO read command has no response frame and the struct iu[1024] won't be filled. I/Os which are normally completed will be treated as failed in sas_ata_task_done() when iu contains abnormal dirty data. Consequently ending_fis should not be filled by iu when the response frame hasn't been written to memory. Fixes: d380f55503ed ("scsi: hisi_sas: Don't bother clearing status buffer IU in task prep") Signed-off-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1689045300-44318-2-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-19scsi: sg: Fix checking return value of blk_get_queue()Yu Kuai
Commit fcaa174a9c99 ("scsi/sg: don't grab scsi host module reference") make a mess how blk_get_queue() is called, blk_get_queue() returns true on success while the caller expects it returns 0 on success. Fix this problem and also add a corresponding error message on failure. Fixes: fcaa174a9c99 ("scsi/sg: don't grab scsi host module reference") Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Closes: https://lore.kernel.org/all/87lefv622n.fsf@linux.ibm.com/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20230705024001.177585-1-yukuai1@huaweicloud.com Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-11scsi: storvsc: Handle SRB status value 0x30Michael Kelley
In response to a disk I/O request, Hyper-V has been observed to return SRB status value 0x30. This indicates the request was not processed by Hyper-V because low memory conditions on the host caused an internal error. The 0x30 status is not recognized by storvsc, so the I/O operation is not flagged as an error. The request is treated as if it completed normally but with zero data transferred, causing a flood of retries. Add a definition for this SRB status value and handle it like other error statuses from the Hyper-V host. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1688788886-94279-1-git-send-email-mikelley@microsoft.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-11Merge branch '6.5/scsi-staging' into 6.5/scsi-fixesMartin K. Petersen
Pull in the currently staged SCSI fixes for 6.5. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-08Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "A few late arriving patches that missed the initial pull request. It's mostly bug fixes (the dt-bindings is a fix for the initial pull)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Remove unused function declaration scsi: target: docs: Remove tcm_mod_builder.py scsi: target: iblock: Quiet bool conversion warning with pr_preempt use scsi: dt-bindings: ufs: qcom: Fix ICE phandle scsi: core: Simplify scsi_cdl_check_cmd() scsi: isci: Fix comment typo scsi: smartpqi: Replace one-element arrays with flexible-array members scsi: target: tcmu: Replace strlcpy() with strscpy() scsi: ncr53c8xx: Replace strlcpy() with strscpy() scsi: lpfc: Fix lpfc_name struct packing
2023-07-05Merge patch series "Improve checks in blk_revalidate_disk_zones()"Martin K. Petersen
Damien Le Moal <dlemoal@kernel.org> says: blk_revalidate_disk_zones() implements checks of the zones of a zoned block device, verifying that the zone size is a power of 2 number of sectors, that all zones (except possibly the last one) have the same size and that zones cover the entire addressing space of the device. While these checks are appropriate to verify that well tested hardware devices have an adequate zone configurations, they lack in certain areas which may result in issues with potentially buggy emulated devices implemented with user drivers such as ublk or tcmu. Specifically, this function does not check if the device driver indicated support for the mandatory zone append writes, that is, if the device max_zone_append_sectors queue limit is set to a non-zero value. Additionally, invalid zones such as a zero length zone with a start sector equal to the device capacity will not be detected and result in out of bounds use of the zone bitmaps prepared with the callback function blk_revalidate_zone_cb(). This series address these issues by modifying the 4 block device drivers that currently support zoned block devices to ensure that they all set a zoned device zone size and max zone append sectors limit before executing blk_revalidate_disk_zones(). With these changes in place, patch 5 improves blk_revalidate_disk_zones() to address the missing checks, relying on the fact that the zone size and zone append limit are normally set when this function is called. Link: https://lore.kernel.org/r/20230703024812.76778-1-dlemoal@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-05scsi: sd_zbc: Set zone limits before revalidating zonesDamien Le Moal
In sd_zbc_revalidate_zones(), execute blk_queue_chunk_sectors() and blk_queue_max_zone_append_sectors() to respectively set a ZBC device zone size and maximum zone append sector limit before executing blk_revalidate_disk_zones(). This is to allow the block layer zone reavlidation to check these device characteristics prior to checking all zones of the device. Since blk_queue_max_zone_append_sectors() already caps the device maximum zone append limit to the zone size and to the maximum command size, the max_append value passed to blk_queue_max_zone_append_sectors() is simplified to the maximum number of segments times the number of sectors per page. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230703024812.76778-2-dlemoal@kernel.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-05scsi: aacraid: Avoid -Warray-bounds warningArnd Bergmann
The one-element array in aac_aifcmd is actually meant as a flexible array, and causes an overflow warning that can be avoided using the normal flex arrays: drivers/scsi/aacraid/commsup.c:1166:17: error: array index 1 is past the end of the array (that has type 'u8[1]' (aka 'unsigned char[1]'), cast to '__le32 *' (aka 'unsigned int *')) [-Werror,-Warray-bounds] (((__le32 *)aifcmd->data)[1] == cpu_to_le32(3)); ^ ~ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230703114851.1194510-1-arnd@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-05scsi: scsi_debug: Remove dead codeMaurizio Lombardi
The ramdisk rwlocks are not used anymore. Fixes: 87c715dcde63 ("scsi: scsi_debug: Add per_host_store option") Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20230628150638.53218-1-mlombard@redhat.com Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-05scsi: qla2xxx: Use vmalloc_array() and vcalloc()Julia Lawall
Use vmalloc_array() and vcalloc() to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-25-Julia.Lawall@inria.fr Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-05scsi: fnic: Use vmalloc_array() and vcalloc()Julia Lawall
Use vmalloc_array() and vcalloc() to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-8-Julia.Lawall@inria.fr Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-05scsi: qla2xxx: Fix error code in qla2x00_start_sp()Dan Carpenter
This should be negative -EAGAIN instead of positive. The callers treat non-zero error codes the same so it doesn't really impact runtime beyond some trivial differences to debug output. Fixes: 80676d054e5a ("scsi: qla2xxx: Fix session cleanup hang") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/49866d28-4cfe-47b0-842b-78f110e61aab@moroto.mountain Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-05scsi: qla2xxx: Silence a static checker warningDan Carpenter
Smatch and Clang both complain that LOGIN_TEMPLATE_SIZE is more than sizeof(ha->plogi_els_payld.fl_csp). Smatch warning: drivers/scsi/qla2xxx/qla_iocb.c:3075 qla24xx_els_dcmd2_iocb() warn: '&ha->plogi_els_payld.fl_csp' sometimes too small '16' size = 112 Clang warning: include/linux/fortify-string.h:592:4: error: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror,-Wattribute-warning] __read_overflow2_field(q_size_field, size); When I was reading this code I assumed the "- 4" meant that we were skipping the last 4 bytes but actually it turned out that we are skipping the first four bytes. I have re-written it remove the magic numbers, be more clear and silence the static checker warnings. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/4aa0485e-766f-4b02-8d5d-c6781ea8f511@moroto.mountain Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-05scsi: lpfc: Fix a possible data race in lpfc_unregister_fcf_rescan()Tuo Li
The variable phba->fcf.fcf_flag is often protected by the lock phba->hbalock() when is accessed. Here is an example in lpfc_unregister_fcf_rescan(): spin_lock_irq(&phba->hbalock); phba->fcf.fcf_flag |= FCF_INIT_DISC; spin_unlock_irq(&phba->hbalock); However, in the same function, phba->fcf.fcf_flag is assigned with 0 without holding the lock, and thus can cause a data race: phba->fcf.fcf_flag = 0; To fix this possible data race, a lock and unlock pair is added when accessing the variable phba->fcf.fcf_flag. Reported-by: BassCheck <bass@buaa.edu.cn> Signed-off-by: Tuo Li <islituo@gmail.com> Link: https://lore.kernel.org/r/20230630024748.1035993-1-islituo@gmail.com Reviewed-by: Justin Tee <justin.tee@broadcom.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-30Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi, lpfc, qla2xxx). We have a couple of major core changes impacting other systems: - Command Duration Limits, which spills into block and ATA - block level Persistent Reservation Operations, which touches block, nvme, target and dm Both of these are added with merge commits containing a cover letter explaining what's going on" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits) scsi: core: Improve warning message in scsi_device_block() scsi: core: Replace scsi_target_block() with scsi_block_targets() scsi: core: Don't wait for quiesce in scsi_device_block() scsi: core: Don't wait for quiesce in scsi_stop_queue() scsi: core: Merge scsi_internal_device_block() and device_block() scsi: sg: Increase number of devices scsi: bsg: Increase number of devices scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue scsi: ufs: ufs-pci: Add support for Intel Arrow Lake scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT scsi: ufs: wb: Add explicit flush_threshold sysfs attribute scsi: ufs: ufs-qcom: Switch to the new ICE API scsi: ufs: dt-bindings: qcom: Add ICE phandle scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR scsi: ufs: core: Remove dedicated hwq for dev command scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes ...
2023-06-30Merge tag 'ata-6.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata updates from Damien Le Moal: - Add support for the .remove_new callback to the ata_platform code to simplify device removal interface (Uwe) - Code simplification in ata_dev_revalidate() (Yahu) - Fix code indentation and coding style in the pata_parport protocol modules to avoid warnings from static code analyzers (me) - Clarify ata_eh_qc_retry() behavior with better comments (Niklas) - Simplify and improve ata_change_queue_depth() behavior to have a consistent behavior between libsas managed devices and libata managed devices (e.g. AHCI connected devices) (me) - Cleanup libata-scsi and libata-eh code to use the ata_ncq_enabled() and ata_ncq_supported() helpers instead of open coding flags tests (me) - Cleanup ahci_reset_controller() code (me) - Change the pata_octeon_cf and sata_svw drivers to use of_property_read_reg() to simplify the code (Rob, me) - Remove unnecessary include files from ahci_octeon driver (me) - Modify the DesignWare ahci dt bindings to add support for the Rockchip RK3588 AHCI (Sebastian) * tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (29 commits) dt-bindings: phy: rockchip: rk3588 has two reset lines dt-bindings: ata: dwc-ahci: add Rockchip RK3588 dt-bindings: ata: dwc-ahci: add PHY clocks ata: ahci_octeon: Remove unnecessary include ata: pata_octeon_cf: Add missing header include ata: ahci: Cleanup ahci_reset_controller() ata: Use of_property_read_reg() to parse "reg" ata: libata-scsi: Use ata_ncq_supported in ata_scsi_dev_config() ata: libata-eh: Use ata_ncq_enabled() in ata_eh_speed_down() ata: libata-sata: Improve ata_change_queue_depth() ata: libata-sata: Simplify ata_change_queue_depth() ata: libata-eh: Clarify ata_eh_qc_retry() behavior at call site ata: pata_parport: Fix on26 module code indentation and style ata: pata_parport: Fix on20 module code indentation and style ata: pata_parport: Fix ktti module code indentation and style ata: pata_parport: Fix kbic module code indentation and style ata: pata_parport: Fix friq module code indentation and style ata: pata_parport: Fix fit3 module code indentation and style ata: pata_parport: Fix fit2 module code indentation and style ata: pata_parport: Fix epia module code indentation and style ...
2023-06-28scsi: core: Simplify scsi_cdl_check_cmd()Damien Le Moal
Reading the 800+ pages of SPC often leads to a brain shutdown and to less than ideal code... This resulted in the checks of the rwcdlp and cdlp fields in scsi_cdl_check_cmd() to have identical if-else branches. Replace this with a comment describing the cases we are interested in and replace the if-else code block with a simple test of the cdlp field that is used as the function return value. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@inria.fr> Closes: https://lore.kernel.org/r/202306221657.BJHEADkz-lkp@intel.com/ Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230623073057.816199-1-dlemoal@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-28scsi: isci: Fix comment typoYueh-Shun Li
Spell "transmitting" properly. Found by searching for keyword "tranm". Signed-off-by: Yueh-Shun Li <shamrocklee@posteo.net> Link: https://lore.kernel.org/r/20230622012627.15050-5-shamrocklee@posteo.net Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-28Merge tag 'net-next-6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking changes from Jakub Kicinski: "WiFi 7 and sendpage changes are the biggest pieces of work for this release. The latter will definitely require fixes but I think that we got it to a reasonable point. Core: - Rework the sendpage & splice implementations Instead of feeding data into sockets page by page extend sendmsg handlers to support taking a reference on the data, controlled by a new flag called MSG_SPLICE_PAGES Rework the handling of unexpected-end-of-file to invoke an additional callback instead of trying to predict what the right combination of MORE/NOTLAST flags is Remove the MSG_SENDPAGE_NOTLAST flag completely - Implement SCM_PIDFD, a new type of CMSG type analogous to SCM_CREDENTIALS, but it contains pidfd instead of plain pid - Enable socket busy polling with CONFIG_RT - Improve reliability and efficiency of reporting for ref_tracker - Auto-generate a user space C library for various Netlink families Protocols: - Allow TCP to shrink the advertised window when necessary, prevent sk_rcvbuf auto-tuning from growing the window all the way up to tcp_rmem[2] - Use per-VMA locking for "page-flipping" TCP receive zerocopy - Prepare TCP for device-to-device data transfers, by making sure that payloads are always attached to skbs as page frags - Make the backoff time for the first N TCP SYN retransmissions linear. Exponential backoff is unnecessarily conservative - Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO) - Avoid waking up applications using TLS sockets until we have a full record - Allow using kernel memory for protocol ioctl callbacks, paving the way to issuing ioctls over io_uring - Add nolocalbypass option to VxLAN, forcing packets to be fully encapsulated even if they are destined for a local IP address - Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure in-kernel ECMP implementation (e.g. Open vSwitch) select the same link for all packets. Support L4 symmetric hashing in Open vSwitch - PPPoE: make number of hash bits configurable - Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client (ipconfig) - Add layer 2 miss indication and filtering, allowing higher layers (e.g. ACL filters) to make forwarding decisions based on whether packet matched forwarding state in lower devices (bridge) - Support matching on Connectivity Fault Management (CFM) packets - Hide the "link becomes ready" IPv6 messages by demoting their printk level to debug - HSR: don't enable promiscuous mode if device offloads the proto - Support active scanning in IEEE 802.15.4 - Continue work on Multi-Link Operation for WiFi 7 BPF: - Add precision propagation for subprogs and callbacks. This allows maintaining verification efficiency when subprograms are used, or in fact passing the verifier at all for complex programs, especially those using open-coded iterators - Improve BPF's {g,s}setsockopt() length handling. Previously BPF assumed the length is always equal to the amount of written data. But some protos allow passing a NULL buffer to discover what the output buffer *should* be, without writing anything - Accept dynptr memory as memory arguments passed to helpers - Add routing table ID to bpf_fib_lookup BPF helper - Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands - Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark maps as read-only) - Show target_{obj,btf}_id in tracing link fdinfo - Addition of several new kfuncs (most of the names are self-explanatory): - Add a set of new dynptr kfuncs: bpf_dynptr_adjust(), bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size() and bpf_dynptr_clone(). - bpf_task_under_cgroup() - bpf_sock_destroy() - force closing sockets - bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs Netfilter: - Relax set/map validation checks in nf_tables. Allow checking presence of an entry in a map without using the value - Increase ip_vs_conn_tab_bits range for 64BIT builds - Allow updating size of a set - Improve NAT tuple selection when connection is closing Driver API: - Integrate netdev with LED subsystem, to allow configuring HW "offloaded" blinking of LEDs based on link state and activity (i.e. packets coming in and out) - Support configuring rate selection pins of SFP modules - Factor Clause 73 auto-negotiation code out of the drivers, provide common helper routines - Add more fool-proof helpers for managing lifetime of MDIO devices associated with the PCS layer - Allow drivers to report advanced statistics related to Time Aware scheduler offload (taprio) - Allow opting out of VF statistics in link dump, to allow more VFs to fit into the message - Split devlink instance and devlink port operations New hardware / drivers: - Ethernet: - Synopsys EMAC4 IP support (stmmac) - Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches - Marvell 88E6250 7 port switches - Microchip LAN8650/1 Rev.B0 PHYs - MediaTek MT7981/MT7988 built-in 1GE PHY driver - WiFi: - Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps - Realtek RTL8723DS (SDIO variant) - Realtek RTL8851BE - CAN: - Fintek F81604 Drivers: - Ethernet NICs: - Intel (100G, ice): - support dynamic interrupt allocation - use meta data match instead of VF MAC addr on slow-path - nVidia/Mellanox: - extend link aggregation to handle 4, rather than just 2 ports - spawn sub-functions without any features by default - OcteonTX2: - support HTB (Tx scheduling/QoS) offload - make RSS hash generation configurable - support selecting Rx queue using TC filters - Wangxun (ngbe/txgbe): - add basic Tx/Rx packet offloads - add phylink support (SFP/PCS control) - Freescale/NXP (enetc): - report TAPRIO packet statistics - Solarflare/AMD: - support matching on IP ToS and UDP source port of outer header - VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6 - add devlink dev info support for EF10 - Virtual NICs: - Microsoft vNIC: - size the Rx indirection table based on requested configuration - support VLAN tagging - Amazon vNIC: - try to reuse Rx buffers if not fully consumed, useful for ARM servers running with 16kB pages - Google vNIC: - support TCP segmentation of >64kB frames - Ethernet embedded switches: - Marvell (mv88e6xxx): - enable USXGMII (88E6191X) - Microchip: - lan966x: add support for Egress Stage 0 ACL engine - lan966x: support mapping packet priority to internal switch priority (based on PCP or DSCP) - Ethernet PHYs: - Broadcom PHYs: - support for Wake-on-LAN for BCM54210E/B50212E - report LPI counter - Microsemi PHYs: support RGMII delay configuration (VSC85xx) - Micrel PHYs: receive timestamp in the frame (LAN8841) - Realtek PHYs: support optional external PHY clock - Altera TSE PCS: merge the driver into Lynx PCS which it is a variant of - CAN: Kvaser PCIEcan: - support packet timestamping - WiFi: - Intel (iwlwifi): - major update for new firmware and Multi-Link Operation (MLO) - configuration rework to drop test devices and split the different families - support for segmented PNVM images and power tables - new vendor entries for PPAG (platform antenna gain) feature - Qualcomm 802.11ax (ath11k): - Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID Advertisement (EMA) support in AP mode - support factory test mode - RealTek (rtw89): - add RSSI based antenna diversity - support U-NII-4 channels on 5 GHz band - RealTek (rtl8xxxu): - AP mode support for 8188f - support USB RX aggregation for the newer chips" * tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits) net: scm: introduce and use scm_recv_unix helper af_unix: Skip SCM_PIDFD if scm->pid is NULL. net: lan743x: Simplify comparison netlink: Add __sock_i_ino() for __netlink_diag_dump(). net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses Revert "af_unix: Call scm_recv() only after scm_set_cred()." phylink: ReST-ify the phylink_pcs_neg_mode() kdoc libceph: Partially revert changes to support MSG_SPLICE_PAGES net: phy: mscc: fix packet loss due to RGMII delays net: mana: use vmalloc_array and vcalloc net: enetc: use vmalloc_array and vcalloc ionic: use vmalloc_array and vcalloc pds_core: use vmalloc_array and vcalloc gve: use vmalloc_array and vcalloc octeon_ep: use vmalloc_array and vcalloc net: usb: qmi_wwan: add u-blox 0x1312 composition perf trace: fix MSG_SPLICE_PAGES build error ipvlan: Fix return value of ipvlan_queue_xmit() netfilter: nf_tables: fix underflow in chain reference counter netfilter: nf_tables: unbind non-anonymous set if rule construction fails ...
2023-06-27Merge tag 'hardening-v6.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "There are three areas of note: A bunch of strlcpy()->strscpy() conversions ended up living in my tree since they were either Acked by maintainers for me to carry, or got ignored for multiple weeks (and were trivial changes). The compiler option '-fstrict-flex-arrays=3' has been enabled globally, and has been in -next for the entire devel cycle. This changes compiler diagnostics (though mainly just -Warray-bounds which is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_ coverage. In other words, there are no new restrictions, just potentially new warnings. Any new FORTIFY warnings we've seen have been fixed (usually in their respective subsystem trees). For more details, see commit df8fc4e934c12b. The under-development compiler attribute __counted_by has been added so that we can start annotating flexible array members with their associated structure member that tracks the count of flexible array elements at run-time. It is possible (likely?) that the exact syntax of the attribute will change before it is finalized, but GCC and Clang are working together to sort it out. Any changes can be made to the macro while we continue to add annotations. As an example of that last case, I have a treewide commit waiting with such annotations found via Coccinelle: https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b Also see commit dd06e72e68bcb4 for more details. Summary: - Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko) - Convert strreplace() to return string start (Andy Shevchenko) - Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook) - Add missing function prototypes seen with W=1 (Arnd Bergmann) - Fix strscpy() kerndoc typo (Arne Welzel) - Replace strlcpy() with strscpy() across many subsystems which were either Acked by respective maintainers or were trivial changes that went ignored for multiple weeks (Azeem Shaikh) - Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers) - Add KUnit tests for strcat()-family - Enable KUnit tests of FORTIFY wrappers under UML - Add more complete FORTIFY protections for strlcat() - Add missed disabling of FORTIFY for all arch purgatories. - Enable -fstrict-flex-arrays=3 globally - Tightening UBSAN_BOUNDS when using GCC - Improve checkpatch to check for strcpy, strncpy, and fake flex arrays - Improve use of const variables in FORTIFY - Add requested struct_size_t() helper for types not pointers - Add __counted_by macro for annotating flexible array size members" * tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits) netfilter: ipset: Replace strlcpy with strscpy uml: Replace strlcpy with strscpy um: Use HOST_DIR for mrproper kallsyms: Replace all non-returning strlcpy with strscpy sh: Replace all non-returning strlcpy with strscpy of/flattree: Replace all non-returning strlcpy with strscpy sparc64: Replace all non-returning strlcpy with strscpy Hexagon: Replace all non-returning strlcpy with strscpy kobject: Use return value of strreplace() lib/string_helpers: Change returned value of the strreplace() jbd2: Avoid printing outside the boundary of the buffer checkpatch: Check for 0-length and 1-element arrays riscv/purgatory: Do not use fortified string functions s390/purgatory: Do not use fortified string functions x86/purgatory: Do not use fortified string functions acpi: Replace struct acpi_table_slit 1-element array with flex-array clocksource: Replace all non-returning strlcpy with strscpy string: use __builtin_memcpy() in strlcpy/strlcat staging: most: Replace all non-returning strlcpy with strscpy drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy ...
2023-06-27Merge tag 'wq-for-6.5-cleanup-ordered' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull ordered workqueue creation updates from Tejun Heo: "For historical reasons, unbound workqueues with max concurrency limit of 1 are considered ordered, even though the concurrency limit hasn't been system-wide for a long time. This creates ambiguity around whether ordered execution is actually required for correctness, which was actually confusing for e.g. btrfs (btrfs updates are being routed through the btrfs tree). There aren't that many users in the tree which use the combination and there are pending improvements to unbound workqueue affinity handling which will make inadvertent use of ordered workqueue a bigger loss. This clarifies the situation for most of them by updating the ones which require ordered execution to use alloc_ordered_workqueue(). There are some conversions being routed through subsystem-specific trees and likely a few stragglers. Once they're all converted, workqueue can trigger a warning on unbound + @max_active==1 usages and eventually drop the implicit ordered behavior" * tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: rxrpc: Use alloc_ordered_workqueue() to create ordered workqueues net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues net: wwan: t7xx: Use alloc_ordered_workqueue() to create ordered workqueues dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues media: amphion: Use alloc_ordered_workqueue() to create ordered workqueues scsi: NCR5380: Use default @max_active for hostdata->work_q media: coda: Use alloc_ordered_workqueue() to create ordered workqueues crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues wifi: mwifiex: Use default @max_active for workqueues wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues greybus: Use alloc_ordered_workqueue() to create ordered workqueues powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues
2023-06-26Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linuxLinus Torvalds
Pull block updates from Jens Axboe: - NVMe pull request via Keith: - Various cleanups all around (Irvin, Chaitanya, Christophe) - Better struct packing (Christophe JAILLET) - Reduce controller error logs for optional commands (Keith) - Support for >=64KiB block sizes (Daniel Gomez) - Fabrics fixes and code organization (Max, Chaitanya, Daniel Wagner) - bcache updates via Coly: - Fix a race at init time (Mingzhe Zou) - Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye) - use page pinning in the block layer for dio (David) - convert old block dio code to page pinning (David, Christoph) - cleanups for pktcdvd (Andy) - cleanups for rnbd (Guoqing) - use the unchecked __bio_add_page() for the initial single page additions (Johannes) - fix overflows in the Amiga partition handling code (Michael) - improve mq-deadline zoned device support (Bart) - keep passthrough requests out of the IO schedulers (Christoph, Ming) - improve support for flush requests, making them less special to deal with (Christoph) - add bdev holder ops and shutdown methods (Christoph) - fix the name_to_dev_t() situation and use cases (Christoph) - decouple the block open flags from fmode_t (Christoph) - ublk updates and cleanups, including adding user copy support (Ming) - BFQ sanity checking (Bart) - convert brd from radix to xarray (Pankaj) - constify various structures (Thomas, Ivan) - more fine grained persistent reservation ioctl capability checks (Jingbo) - misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan, Jordy, Li, Min, Yu, Zhong, Waiman) * tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits) scsi/sg: don't grab scsi host module reference ext4: Fix warning in blkdev_put() block: don't return -EINVAL for not found names in devt_from_devname cdrom: Fix spectre-v1 gadget block: Improve kernel-doc headers blk-mq: don't insert passthrough request into sw queue bsg: make bsg_class a static const structure ublk: make ublk_chr_class a static const structure aoe: make aoe_class a static const structure block/rnbd: make all 'class' structures const block: fix the exclusive open mask in disk_scan_partitions block: add overflow checks for Amiga partition support block: change all __u32 annotations to __be32 in affs_hardblocks.h block: fix signed int overflow in Amiga partition support block: add capacity validation in bdev_add_partition() block: fine-granular CAP_SYS_ADMIN for Persistent Reservation block: disallow Persistent Reservation on partitions reiserfs: fix blkdev_put() warning from release_journal_dev() block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions() block: document the holder argument to blkdev_get_by_path ...
2023-06-24scsi: iscsi_tcp: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpageDavid Howells
Use sendmsg() with MSG_SPLICE_PAGES rather than sendpage. This allows multiple pages and multipage folios to be passed through. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> cc: Lee Duncan <lduncan@suse.com> cc: Chris Leech <cleech@redhat.com> cc: "James E.J. Bottomley" <jejb@linux.ibm.com> cc: "Martin K. Petersen" <martin.petersen@oracle.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: Al Viro <viro@zeniv.linux.org.uk> cc: open-iscsi@googlegroups.com Link: https://lore.kernel.org/r/20230623225513.2732256-12-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-23scsi/sg: don't grab scsi host module referenceYu Kuai
In order to prevent request_queue to be freed before cleaning up blktrace debugfs entries, commit db59133e9279 ("scsi: sg: fix blktrace debugfs entries leakage") use scsi_device_get(), however, scsi_device_get() will also grab scsi module reference and scsi module can't be removed. It's reported that blktests can't unload scsi_debug after block/001: blktests (master) # ./check block block/001 (stress device hotplugging) [failed] +++ /root/blktests/results/nodev/block/001.out.bad 2023-06-19 Running block/001 Stressing sd +modprobe: FATAL: Module scsi_debug is in use. Fix this problem by grabbing request_queue reference directly, so that scsi host module can still be unloaded while request_queue will be pinged by sg device. Reported-by: Chaitanya Kulkarni <chaitanyak@nvidia.com> Link: https://lore.kernel.org/all/1760da91-876d-fc9c-ab51-999a6f66ad50@nvidia.com/ Fixes: db59133e9279 ("scsi: sg: fix blktrace debugfs entries leakage") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230621160111.1433521-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-21scsi: smartpqi: Replace one-element arrays with flexible-array membersGustavo A. R. Silva
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element arrays with flexible-array members in a couple of structures, and refactor the rest of the code, accordingly. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy(). This results in no differences in binary output. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/204 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/ZJNdKDkuRbFZpASS@work Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-21scsi: ncr53c8xx: Replace strlcpy() with strscpy()Azeem Shaikh
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Link: https://lore.kernel.org/r/20230621030033.3800351-2-azeemshaikh38@gmail.com Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-15 07:03:10 +0000