summaryrefslogtreecommitdiff
path: root/drivers/soc
AgeCommit message (Collapse)Author
2020-10-26soc: qcom: rpmpd: Add MSM8916 power domainsStephan Gerhold
MSM8916 has two RPM power domains: VDDCX and VDDMX. Add the necessary definitions to manage them with rpmpd. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200916104135.25085-4-stephan@gerhold.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-26soc: qcom: rpmpd: Add MSM8939 power-domainsJun Nie
Add the shared modemcx/cx/mx power-domains found on MSM8939. Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Jun Nie <jun.nie@linaro.org> Link: https://lore.kernel.org/r/20200930100145.9457-3-jun.nie@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-26soc: qcom: rpmpd: Rename MAX_8996_RPMPD_STATE to MAX_CORNER_RPMPD_STATEStephan Gerhold
Older SoCs like MSM8916, MSM8939, MSM8974, MSM8996, ... use "voltage corners" instead of "voltage levels". It seems like they all use exactly the same set of corner values, a value from 0-6 where 6 is the maximum corner (super turbo). In preparation to add the power domains for MSM8916, rename MAX_8996_RPMPD_STATE to MAX_CORNER_RPMPD_STATE to make it clear that this is the max_state to be used for all SoCs using corners. - Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200916104135.25085-2-stephan@gerhold.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-26soc: qcom: rpmpd: Add SDM660 power-domainsKonrad Dybcio
Add the shared cx/mx and sensor sub-system's cx and mx power-domains found on SDM660. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Link: https://lore.kernel.org/r/20201018122620.9735-1-kholk11@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-26soc: qcom: rpmh: Allow RPMH driver to be loaded as a moduleJohn Stultz
This patch allow the rpmh driver to be loaded as a permenent module. Meaning it can be loaded from a module, but then cannot be unloaded. Ideally, it would include a remove hook and related logic, but the rpmh driver is fairly core to the system, so once its loaded with almost anything else to get the system to go, the dependencies are not likely to ever also be removed. So making it a permanent module at least improves things slightly over requiring it to be a built in driver. Cc: Todd Kjos <tkjos@google.com> Cc: Saravana Kannan <saravanak@google.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rajendra Nayak <rnayak@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [mkshah: Fix typos in commit message, send after removing _rcuidle trace] Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1601877596-32676-3-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-26Revert "drivers: qcom: rpmh-rsc: Use rcuidle tracepoints for rpmh"Maulik Shah
Commit efde2659b0fe ("drivers: qcom: rpmh-rsc: Use rcuidle tracepoints for rpmh") was written to fix a bug seen in an unmerged series that implemented a struct generic_pm_domain::power_off() callback calling rpmh_flush(). See stack trace below. Call trace: dump_backtrace+0x0/0x174 show_stack+0x20/0x2c dump_stack+0xc8/0x124 lockdep_rcu_suspicious+0xe4/0x104 __tcs_buffer_write+0x230/0x2d0 rpmh_rsc_write_ctrl_data+0x210/0x270 rpmh_flush+0x84/0x24c rpmh_domain_power_off+0x78/0x98 _genpd_power_off+0x40/0xc0 genpd_power_off+0x168/0x208 Later the final merged solution is to use CPU PM notification to invoke rpmh_flush() and power_off() callback of genpd is not implemented in the driver. CPU PM notifiers are run with RCU enabled/watching (see cpu_pm_notify() and how it calls rcu_irq_enter_irqson() before calling the notifiers). Remove this change since RCU will not be idle during CPU PM notifications hence not required to use _rcuidle tracepoint. Using _rcuidle tracepoint prevented rpmh driver to be loadable module as these are not exported symbols. This reverts commit efde2659b0fe835732047357b2902cca14f054d9. Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1601877596-32676-2-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-26soc: qcom: llcc: Support chipsets that can write to llccIsaac J. Manjarres
Older chipsets may not be allowed to configure certain LLCC registers as that is handled by the secure side software. However, this is not the case for newer chipsets and they must configure these registers according to the contents of the SCT table, while keeping in mind that older targets may not have these capabilities. So add support to allow such configuration of registers to enable capacity based allocation and power collapse retention for capable chipsets. Reason for choosing capacity based allocation rather than the default way based allocation is because capacity based allocation allows more finer grain partition and provides more flexibility in configuration. As for the retention through power collapse, it has an advantage where the cache hits are more when we wake up from power collapse although it does burn more power but the exact power numbers are not known at the moment. Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> [saiprakash.ranjan@codeaurora.org: use existing config and reword commit msg] Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Link: https://lore.kernel.org/r/dac7e11cf654fc6d75a6b5ca062ab87b01547810.1600151951.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-26soc: qcom: llcc: Move llcc configuration to its own functionSai Prakash Ranjan
Cleanup qcom_llcc_cfg_program() by moving llcc configuration to a separate function of its own. Also correct misspelled 'instance' caught by checkpatch. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Link: https://lore.kernel.org/r/51f9ad67333eedf326212dd1b040aade6978e5b1.1600151951.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-26soc: qcom: smp2p: Safely acquire spinlock without IRQsEvan Green
smp2p_update_bits() should disable interrupts when it acquires its spinlock. This is important because without the _irqsave, a priority inversion can occur. This function is called both with interrupts enabled in qcom_q6v5_request_stop(), and with interrupts disabled in ipa_smp2p_panic_notifier(). IRQ handling of spinlocks should be consistent to avoid the panic notifier deadlocking because it's sitting on the thread that's already got the lock via _request_stop(). Found via lockdep. Cc: stable@vger.kernel.org Fixes: 50e99641413e7 ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200929133040.RESEND.1.Ideabf6dcdfc577cf39ce3d95b0e4aa1ac8b38f0c@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-26soc: mediatek: Check if power domains can be powered on at boot timeNicolas Boichat
In the error case, where a power domain cannot be powered on successfully at boot time (in mtk_register_power_domains), pm_genpd_init would still be called with is_off=false, and the system would later try to disable the power domain again, triggering warnings as disabled clocks are disabled again (and other potential issues). Also print a warning splat in that case, as this should never happen. Fixes: c84e358718a66f7 ("soc: Mediatek: Add SCPSYS power domain driver") Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Link: https://lore.kernel.org/r/20200928113107.v2.1.I5e6f8c262031d0451fe7241b744f4f3111c1ce71@changeid Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-10-26soc: renesas: rmobile-sysc: Fix some leaks in rmobile_init_pm_domains()Dan Carpenter
This code needs to call iounmap() on one error path. Fixes: 2173fc7cb681 ("ARM: shmobile: R-Mobile: Add DT support for PM domains") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200923113142.GC1473821@mwanda Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-10-24Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ...
2020-10-24Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits) drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc soc: amlogic: pm-domains: use always-on flag reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() ...
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-24Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I had queued up a batch of fixes that got a bit close to the release for sending in before the merge window opened, so I'm including them in the merge window batch instead. Mostly smaller DT tweaks and fixes, the usual mix that we tend to have through the releases" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: iwg20d-q7-common: Fix touch controller probe failure ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2 soc: actions: include header to fix missing prototype arm64: dts: ti: k3-j721e: Rename mux header and update macro names soc: qcom: pdr: Fixup array type of get_domain_list_resp message arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells arm64: dts: qcom: kitakami: Temporarily disable SDHCI1 arm64: dts: sdm630: Temporarily disable SMMUs by default arm64: dts: sdm845: Fixup OPP table for all qup devices arm64: dts: allwinner: h5: remove Mali GPU PMU module ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator soc: xilinx: Fix error code in zynqmp_pm_probe()
2020-10-22PM: AVS: qcom-cpr: Move the driver to the qcom specific driversUlf Hansson
The avs drivers are all SoC specific drivers that doesn't share any code. Instead they are located in a directory, mostly to keep similar functionality together. From a maintenance point of view, it makes better sense to collect SoC specific drivers like these, into the SoC specific directories. Therefore, let's move the qcom-cpr driver to the qcom directory. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Niklas Cassel <nks@flawful.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-16PM: AVS: smartreflex Move driver to soc specific driversUlf Hansson
The avs drivers are all SoC specific drivers that doesn't share any code. Instead they are located in a directory, mostly to keep similar functionality together. From a maintenance point of view, it makes better sense to collect SoC specific drivers like these, into the SoC specific directories. Therefore, let's move the smartreflex driver for OMAP to the ti directory. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-16PM: AVS: rockchip-io: Move the driver to the rockchip specific driversUlf Hansson
The avs drivers are all SoC specific drivers that doesn't share any code. Instead they are located in a directory, mostly to keep similar functionality together. From a maintenance point of view, it makes better sense to collect SoC specific drivers like these, into the SoC specific directories. Therefore, let's move the rockchip-io driver to the rockchip directory. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-14Merge tag 'pm-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These rework the collection of cpufreq statistics to allow it to take place if fast frequency switching is enabled in the governor, rework the frequency invariance handling in the cpufreq core and drivers, add new hardware support to a couple of cpufreq drivers, fix a number of assorted issues and clean up the code all over. Specifics: - Rework cpufreq statistics collection to allow it to take place when fast frequency switching is enabled in the governor (Viresh Kumar). - Make the cpufreq core set the frequency scale on behalf of the driver and update several cpufreq drivers accordingly (Ionela Voinescu, Valentin Schneider). - Add new hardware support to the STI and qcom cpufreq drivers and improve them (Alain Volmat, Manivannan Sadhasivam). - Fix multiple assorted issues in cpufreq drivers (Jon Hunter, Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan Gerhold, Viresh Kumar). - Fix several assorted issues in the operating performance points (OPP) framework (Stephan Gerhold, Viresh Kumar). - Allow devfreq drivers to fetch devfreq instances by DT enumeration instead of using explicit phandles and modify the devfreq core code to support driver-specific devfreq DT bindings (Leonard Crestez, Chanwoo Choi). - Improve initial hardware resetting in the tegra30 devfreq driver and clean up the tegra cpuidle driver (Dmitry Osipenko). - Update the cpuidle core to collect state entry rejection statistics and expose them via sysfs (Lina Iyer). - Improve the ACPI _CST code handling diagnostics (Chen Yu). - Update the PSCI cpuidle driver to allow the PM domain initialization to occur in the OSI mode as well as in the PC mode (Ulf Hansson). - Rework the generic power domains (genpd) core code to allow domain power off transition to be aborted in the absence of the "power off" domain callback (Ulf Hansson). - Fix two suspend-to-idle issues in the ACPI EC driver (Rafael Wysocki). - Fix the handling of timer_expires in the PM-runtime framework on 32-bit systems and the handling of device links in it (Grygorii Strashko, Xiang Chen). - Add IO requests batching support to the hibernate image saving and reading code and drop a bogus get_gendisk() from there (Xiaoyi Chen, Christoph Hellwig). - Allow PCIe ports to be put into the D3cold power state if they are power-manageable via ACPI (Lukas Wunner). - Add missing header file include to a power capping driver (Pujin Shi). - Clean up the qcom-cpr AVS driver a bit (Liu Shixin). - Kevin Hilman steps down as designated reviwer of adaptive voltage scaling (AVS) drivers (Kevin Hilman)" * tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits) cpufreq: stats: Fix string format specifier mismatch arm: disable frequency invariance for CONFIG_BL_SWITCHER cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale() cpufreq: stats: Add memory barrier to store_reset() cpufreq: schedutil: Simplify sugov_fast_switch() ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe() ACPI: EC: PM: Flush EC work unconditionally after wakeup PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI PM: hibernate: remove the bogus call to get_gendisk() in software_resume() cpufreq: Move traces and update to policy->cur to cpufreq core cpufreq: stats: Enable stats for fast-switch as well cpufreq: stats: Mark few conditionals with unlikely() cpufreq: stats: Remove locking cpufreq: stats: Defer stats update to cpufreq_stats_record_transition() PM: domains: Allow to abort power off when no ->power_off() callback PM: domains: Rename power state enums for genpd PM / devfreq: tegra30: Improve initial hardware resetting PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function PM / devfreq: Add devfreq_get_devfreq_by_node function ...
2020-10-10soc/tegra: pmc: Don't create fake interrupt hierarchy levelsMarc Zyngier
The Tegra PMC driver does ungodly things with the interrupt hierarchy, repeatedly corrupting it by pulling hwirq numbers out of thin air, overriding existing IRQ mappings and changing the handling flow of unsuspecting users. All of this is done in the name of preserving the interrupt hierarchy even when these levels do not exist in the HW. Together with the use of proper IRQs for IPIs, this leads to an unbootable system as the rescheduling IPI gets repeatedly repurposed for random drivers... Instead, let's simply mark the level from which the hierarchy does not make sense for the HW, and let the core code trim the usused levels from the hierarchy. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-10soc/tegra: pmc: Allow optional irq parent callbacksMarc Zyngier
Make the PMC driver resistent to variable depth interrupt hierarchy, which we are about to introduce. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-05Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull opertaing performance points (OPP) framework fixes for 5.10-rc1 from Viresh Kumar: "- Return -EPROBE_DEFER properly from dev_pm_opp_get_opp_table() (Stephan Gerhold). - Minor cleanups around required-opps (Stephan Gerhold). - Extends opp-supported-hw property to contain multiple versions (Viresh Kumar). - Multiple cleanups around dev_pm_opp_attach_genpd() (Viresh Kumar). - Multiple fixes, cleanups in the OPP core for overall better design (Viresh Kumar)." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Allow opp-level to be set to 0 opp: Prevent memory leak in dev_pm_opp_attach_genpd() ARM: tegra: Pass multiple versions in opp-supported-hw property opp: Allow opp-supported-hw to contain multiple versions dt-bindings: opp: Allow opp-supported-hw to contain multiple versions opp: Set required OPPs in reverse order when scaling down opp: Reduce code duplication in _set_required_opps() opp: Drop unnecessary check from dev_pm_opp_attach_genpd() opp: Handle multiple calls for same OPP table in _of_add_opp_table_v1() opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER opp: Remove _dev_pm_opp_find_and_remove_table() wrapper opp: Split out _opp_set_rate_zero() opp: Reuse the enabled flag in !target_freq path opp: Rename regulator_enabled and use it as status of all resources
2020-10-03Merge tag 'v5.9-next-soc' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers cmdq helper: - add new functionality for writing and reading values to and from addresses * tag 'v5.9-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc Link: https://lore.kernel.org/r/ac672cc9-059c-b768-3a67-1f674d4a2b7a@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'amlogic-drivers' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers soc: amlogic: driver updates for v5.10 - misc. pm-domain updates * tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: soc: amlogic: pm-domains: use always-on flag soc: amlogic: meson-ee-pwrc: add support for the Meson AXG SoCs dt-bindings: power: amlogic, meson-ee-pwrc: add Amlogic AXG power controller bindings Link: https://lore.kernel.org/r/7hblhukjzx.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'qcom-drivers-for-5.10' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.10 Replace the busy wait for free tcs slots in the RPMh driver with a sleeping wait and use memory barriers when writing the command registers. Add a bunch of SoC ids to the socinfo driver, fix an erro printin the apr driver and migrate llcc to devm_platform_ioremap_resource_byname(). * tag 'qcom-drivers-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: llcc: use devm_platform_ioremap_resource_byname() soc: qcom: apr: Fixup the error displayed on lookup failure soc: qcom: socinfo: Add msm8992/4 and apq8094 SoC IDs soc: qcom: rpmh-rsc: Sleep waiting for tcs slots to be free soc: qcom-geni-se: Don't use relaxed writes when writing commands soc: qcom: socinfo: add SC7180 entry to soc_id array soc: qcom: socinfo: add soc id for IPQ6018 Link: https://lore.kernel.org/r/20200924040504.179708-1-bjorn.andersson@linaro.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'soc-fsl-next-v5.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers NXP/FSL SoC driver updates for v5.10 Fix various compile warnings and static analysis warnings for: - QBMan driver - DPIO driver - QE driver * tag 'soc-fsl-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() soc: fsl: dpio: remove set but not used 'addr_cena' soc: fsl: qbman: Fix return value on success soc: fsl: qman: fix -Wpacked-not-aligned warnings Link: https://lore.kernel.org/r/20200923224416.25788-1-leoyang.li@nxp.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'imx-drivers-5.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers update for 5.10: - Use dev_err_probe() to simplify error handling for i.MX GPCv2 driver. - Add a check in i.MX SCU power domain driver to ignore the power domains that are not owned by the current partition. * tag 'imx-drivers-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: firmware: imx: scu-pd: ignore power domain not owned soc: imx: gpcv2: Use dev_err_probe() to simplify error handling Link: https://lore.kernel.org/r/20200923073009.23678-1-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'sunxi-drivers-for-5.10-1' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers One small style fix for the Allwinner SRAM driver * tag 'sunxi-drivers-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: soc: sunxi: sram: remove unneeded semicolon Link: https://lore.kernel.org/r/175d36ad-bc98-4d5d-b035-ce467e932248.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03Merge tag 'zynqmp-soc-for-v5.9-v2' of https://github.com/Xilinx/linux-xlnx ↵Olof Johansson
into arm/fixes arm64: soc: ZynqMP SoC changes for v5.9-v2 - Fix error code in zynqmp_power driver * tag 'zynqmp-soc-for-v5.9-v2' of https://github.com/Xilinx/linux-xlnx: soc: xilinx: Fix error code in zynqmp_pm_probe() Link: https://lore.kernel.org/r/9b23dd60-45f4-cd7d-e81a-e8ab8e20af7c@xilinx.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-26Merge tag 'drivers_soc_for_5.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers ARM: soc: TI driver updates for v5.10 Consist of: - Add Ring accelerator support for AM65x - Add TI PRUSS platform driver and enable it on available platforms - Extend PRUSS driver for CORECLK_MUX/IEPCLK_MUX support - UDMA rx ring pair fix - Add socinfo entry for J7200 * tag 'drivers_soc_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: Add missing '#' to fix schema errors: soc: ti: Convert to DEFINE_SHOW_ATTRIBUTE dmaengine: ti: k3-udma-glue: Fix parameters for rx ring pair request soc: ti: k3-socinfo: Add entry for J7200 soc: ti: pruss: support CORECLK_MUX and IEPCLK_MUX dt-bindings: soc: ti: Update TI PRUSS bindings regarding clock-muxes firmware: ti_sci: allow frequency change for disabled clocks by default soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one soc: ti: pruss: Enable support for ICSSG subsystems on K3 J721E SoCs soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM65x SoCs soc: ti: pruss: Add support for PRU-ICSS subsystems on 66AK2G SoC soc: ti: pruss: Add support for PRU-ICSS subsystems on AM57xx SoCs soc: ti: pruss: Add support for PRU-ICSSs on AM437x SoCs soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs dt-bindings: soc: ti: Add TI PRUSS bindings bindings: soc: ti: soc: ringacc: remove ti,dma-ring-reset-quirk soc: ti: k3: ringacc: add am65x sr2.0 support Link: https://lore.kernel.org/r/1600656828-29267-1-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-26Merge tag 'samsung-soc-5.10' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung mach/soc changes for v5.10 1. Clear unneeded L2C-310 flag which presenc was triggering warning message. 2. Fix build of SAMSUNG_PM_DEBUG without MMU. 3. Minor cleanups and update of linux-samsung-soc mailing list in Maintainers. * tag 'samsung-soc-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: exynos: clear L310_AUX_CTRL_NS_LOCKDOWN in default l2c_aux_val Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-26Merge tag 'tegra-for-5.10-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers soc/tegra: Changes for v5.10-rc1 These changes contain a bit of cleanup and chip support for the upcoming Tegra234 SoC. * tag 'tegra-for-5.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Add Tegra234 support soc/tegra: pmc: Reorder reset sources/levels definitions soc/tegra: misc: Add Tegra234 support soc/tegra: fuse: Add Tegra234 support soc/tegra: fuse: Implement tegra_is_silicon() soc/tegra: fuse: Extract tegra_get_platform() Link: https://lore.kernel.org/r/20200918150303.3938852-2-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-26Merge tag 'renesas-drivers-for-v5.10-tag2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers Renesas driver updates for v5.10 (take two) - Add core support for the R-Car V3U (R8A779A0) SoC, including System Controller (SYSC) and Reset (RST) support, - Various Kconfig cleanups. * tag 'renesas-drivers-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: soc: renesas: r8a779a0-sysc: Add r8a779a0 support soc: renesas: rcar-rst: Add support for R-Car V3U soc: renesas: Identify R-Car V3U soc: renesas: Sort driver description title soc: renesas: Use ARM32/ARM64 for menu description dt-bindings: clock: Add r8a779a0 CPG Core Clock Definitions dt-bindings: power: Add r8a779a0 SYSC power domain definitions Link: https://lore.kernel.org/r/20200918124800.15555-4-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-26Merge tag 'actions-drivers-fixes-for-v5.9' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/fixes Actions Semi drivers fixes for v5.9 - Fix the missing prototype warning in owl-sps-helper driver by including owl-sps header * tag 'actions-drivers-fixes-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions: soc: actions: include header to fix missing prototype Link: https://lore.kernel.org/r/20200922114559.GD11251@Mani-XPS-13-9360 Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-26Merge tag 'qcom-drivers-fixes-for-5.9' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm driver fixes for v5.9 Fix the array type of the domain_list QMI response in PDR. * tag 'qcom-drivers-fixes-for-5.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: pdr: Fixup array type of get_domain_list_resp message Link: https://lore.kernel.org/r/20200921235241.36463-1-bjorn.andersson@linaro.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-26Merge tag 'tegra-for-5.10-arm64-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Changes for v5.10-rc1 This set of changes fixes some minor issues in existing device trees and adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled to allow them to be detected by software. It also adds support for the Tegra234 VDK board, which is a pre-silicon platform for the upcoming Orin SoC. * tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Initial Tegra234 VDK support arm64: tegra: Populate EEPROMs for Jetson Xavier NX arm64: tegra: Add label properties for EEPROMs arm64: tegra: Add DT binding for AHUB components arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano arm64: tegra: Properly size register regions for GPU on Tegra194 arm64: tegra: Use valid PWM period for VDD_GPU on Tegra210 arm64: tegra: Describe display controller outputs for Tegra210 arm64: tegra: Disable SD card write-protection on Jetson Nano arm64: tegra: Add VBUS supply for micro USB port on Jetson Nano arm64: tegra: Wire up pinctrl states for all DPAUX controllers arm64: tegra: Add ID EEPROMs on Jetson AGX Xavier Link: https://lore.kernel.org/r/20200918150303.3938852-5-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-25soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe apiDennis YC Hsieh
Add clear parameter to let client decide if event should be clear to 0 after GCE receive it. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://lore.kernel.org/r/1594136714-11650-9-git-send-email-dennis-yc.hsieh@mediatek.com [mb: fix commit message] Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-09-25soc: mediatek: cmdq: add jump functionDennis YC Hsieh
Add jump function so that client can jump to any address which contains instruction. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Link: https://lore.kernel.org/r/1594136714-11650-8-git-send-email-dennis-yc.hsieh@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-09-25soc: mediatek: cmdq: add write_s_mask value functionDennis YC Hsieh
add write_s_mask_value function in cmdq helper functions which writes a constant value to address with mask and large dma access support. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Link: https://lore.kernel.org/r/1594136714-11650-7-git-send-email-dennis-yc.hsieh@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-09-25soc: mediatek: cmdq: add write_s value functionDennis YC Hsieh
add write_s function in cmdq helper functions which writes a constant value to address with large dma access support. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Link: https://lore.kernel.org/r/1594136714-11650-6-git-send-email-dennis-yc.hsieh@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-09-25soc: mediatek: cmdq: add read_s functionDennis YC Hsieh
Add read_s function in cmdq helper functions which support read value from register or dma physical address into gce internal register. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Link: https://lore.kernel.org/r/1594136714-11650-5-git-send-email-dennis-yc.hsieh@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-09-25soc: mediatek: cmdq: add write_s_mask functionDennis YC Hsieh
add write_s_mask function in cmdq helper functions which writes value contains in internal register to address with mask and large dma access support. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Link: https://lore.kernel.org/r/1594136714-11650-4-git-send-email-dennis-yc.hsieh@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-09-25soc: mediatek: cmdq: add write_s functionDennis YC Hsieh
add write_s function in cmdq helper functions which writes value contains in internal register to address with large dma access support. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Link: https://lore.kernel.org/r/1594136714-11650-3-git-send-email-dennis-yc.hsieh@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-09-25soc: mediatek: cmdq: add address shift in jumpDennis YC Hsieh
Add address shift when compose jump instruction to compatible with 35bit format. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Link: https://lore.kernel.org/r/1594136714-11650-2-git-send-email-dennis-yc.hsieh@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-09-25soc: mediatek: mtk-infracfg: Fix kerneldocKrzysztof Kozlowski
Fix W=1 compile warnings (invalid kerneldoc): drivers/soc/mediatek/mtk-infracfg.c:34: warning: Function parameter or member 'infracfg' not described in 'mtk_infracfg_set_bus_protection' drivers/soc/mediatek/mtk-infracfg.c:34: warning: Excess function parameter 'regmap' description in 'mtk_infracfg_set_bus_protection' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200729074415.28393-1-krzk@kernel.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-09-25soc: aspeed-lpc-ctrl: Fix driver nameJoel Stanley
Clarify the string now that it supports the AST2600 too. Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-25soc: aspeed-lpc-ctrl: Fix whitespaceJoel Stanley
Some misaligned indentation I noticed when applying another patch. Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-25soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600Joel Stanley
The ast2600 disables the mapping of AHB memory regions by default, only allowing the LPC window to point to SPI NOR. In order to point the window to any AHB address, an ast2600 specific bit must be toggled. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20200312121413.294384-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-25soc: aspeed-lpc-ctrl: Fail probe of lpc-ctrl if reserved memory is not alignedAndrew Jeffery
Alignment is a hardware constraint of the LPC2AHB bridge, and misaligned reserved memory will present as corrupted data. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20191016233950.10100-1-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-25soc: aspeed: lpc: Add AST2600 compatible stringsBrad Bishop
The AST2600 has the same lpc-ctrl and lpc-snoop devices as the AST2500. Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190925125610.12096-4-bradleyb@fuzziesquirrel.com Signed-off-by: Joel Stanley <joel@jms.id.au>
generated by cgit (git 2.34.1) at 2025-09-16 12:11:16 +0000