summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
AgeCommit message (Collapse)Author
2024-06-04serial: imx: stop casting struct uart_port to struct imx_portRasmus Villemoes
struct imx_port does have a struct uart_port as its first member, so the current code works, but it is not how kernel code is usually written. Similar to many other serial drivers, introduce and use a to_imx_port() helper based on container_of(). No functional change. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20240528094022.2161066-1-linux@rasmusvillemoes.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04tty: sunsu: Simplify device_node cleanup by using __freeShresth Prasad
Add `__free` function attribute to `ap` and `match` pointer initialisations which ensure that the pointers are freed as soon as they go out of scope, thus removing the need to manually free them using `of_node_put`. This also removes the need for the `goto` statement and the `rc` variable. Suggested-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Shresth Prasad <shresthprasad7@gmail.com> Link: https://lore.kernel.org/r/20240518114051.18125-3-shresthprasad7@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-24Merge tag 'tty-6.10-rc1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small TTY and Serial driver fixes that missed the 6.9-final merge window, but have been in my tree for weeks (my fault, travel caused me to miss this) These fixes include: - more n_gsm fixes for reported problems - 8520_mtk driver fix - 8250_bcm7271 driver fix - sc16is7xx driver fix All of these have been in linux-next for weeks without any reported problems" * tag 'tty-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescaler serial: 8250_bcm7271: use default_mux_rate if possible serial: 8520_mtk: Set RTS on shutdown for Rx in-band wakeup tty: n_gsm: fix missing receive state reset after mode switch tty: n_gsm: fix possible out-of-bounds in gsm0_receive()
2024-05-22Merge tag 'tty-6.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty/serial driver changes for 6.10-rc1. Included in here are: - Usual good set of api cleanups and evolution by Jiri Slaby to make the serial interfaces move out of the 1990's by using kfifos instead of hand-rolling their own logic. - 8250_exar driver updates - max3100 driver updates - sc16is7xx driver updates - exar driver updates - sh-sci driver updates - tty ldisc api addition to help refuse bindings - other smaller serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits) serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev() serial: imx: Raise TX trigger level to 8 serial: 8250_pnp: Simplify "line" related code serial: sh-sci: simplify locking when re-issuing RXDMA fails serial: sh-sci: let timeout timer only run when DMA is scheduled serial: sh-sci: describe locking requirements for invalidating RXDMA serial: sh-sci: protect invalidating RXDMA on shutdown tty: add the option to have a tty reject a new ldisc serial: core: Call device_set_awake_path() for console port dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema tty: serial: uartps: Add support for uartps controller reset arm64: zynqmp: Add resets property for UART nodes dt-bindings: serial: cdns,uart: Add optional reset property serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS() serial: 8250_exar: Keep the includes sorted serial: 8250_exar: Make type of bit the same in exar_ee_*_bit() serial: 8250_exar: Use BIT() in exar_ee_read() serial: 8250_exar: Switch to use dev_err_probe() serial: 8250_exar: Return directly from switch-cases serial: 8250_exar: Decrease indentation level ...
2024-05-21Merge tag 'pci-v6.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...
2024-05-19Merge tag 'kgdb-6.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux Pull kgdb updates from Daniel Thompson: "Nine patches this cycle and they split into just three topics: - Adopt coccinelle's recommendation to adopt str_plural() - A set of seven patches to refactor kdb_read() to improve both code clarity and its discipline with respect to fixed size buffers. This isn't just a refactor. Between them these also fix a cursor movement redraw problem and two buffer overflows (one latent and one real, albeit difficult to tickle). - Fix an NMI-safety problem when enqueuing kdb's keyboard reset code I wrote eight of the nine patches in this collection so many thanks to Doug Anderson for the reviews. The changes that affects drivers/tty/serial is acked by Greg KH" * tag 'kgdb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: serial: kgdboc: Fix NMI-safety problems from keyboard reset code kdb: Simplify management of tmpbuffer in kdb_read() kdb: Replace double memcpy() with memmove() in kdb_read() kdb: Use format-specifiers rather than memset() for padding in kdb_read() kdb: Merge identical case statements in kdb_read() kdb: Fix console handling when editing and tab-completing commands kdb: Use format-strings rather than '\0' injection in kdb_read() kdb: Fix buffer overflow during tab-complete kdb: Use str_plural() to fix Coccinelle warning
2024-05-13Merge tag 'asm-generic-alpha' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull alpha updates from Arnd Bergmann: "I had investigated dropping support for alpha EV5 and earlier a while ago after noticing that this is the only supported CPU family in the kernel without native byte access and that Debian has already dropped support for this generation last year [1] in order to improve performance for the newer machines. This topic came up again when Paul McKenney noticed that parts of the RCU code already rely on byte access and do not work on alpha EV5 reliably, so we decided on using my series to avoid the problem entirely. Al Viro did another series for alpha to address all the known build issues. I rebased his patches without any further changes and included it as a baseline for my work here to avoid conflicts and allow backporting the fixes to stable kernels for the now removed hardware support as well" [ I dearly loved alpha back in the days, but the lack of byte and word operations was a horrible mistake and made everything worse - including very much the crazy IO contortions that resulted from it. It certainly wasn't the only mistake in the architecture, but it's the first-order issue. So while it's a bit sad to see the support for my first alpha go away, if you want to run museum hardware, maybe you should use museum kernels.. - Linus ] * tag 'asm-generic-alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: alpha: drop pre-EV56 support alpha: cabriolet: remove EV5 CPU support alpha: remove LCA and APECS based machines alpha: sable: remove early machine support alpha: remove DECpc AXP150 (Jensen) support alpha: trim the unused stuff from asm-offsets.c alpha: jensen, t2 - make __EXTERN_INLINE same as for the rest alpha: core_lca: take the unused functions out alpha: missing includes alpha: sys_sio: fix misspelled ifdefs alpha: don't make functions public without a reason alpha: add clone3() support alpha: fix modversions for strcpy() et.al. alpha: sort scr_mem{cpy,move}w() out
2024-05-10serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()Hans de Goede
If a serdev_device_driver is already loaded for a serdev_tty_port when it gets registered by tty_port_register_device_attr_serdev() then that driver's probe() method will be called immediately. The serdev_device_driver's probe() method should then be able to call serdev_device_open() successfully, but because UPF_DEAD is still dead serdev_device_open() will fail with -ENXIO in this scenario: serdev_device_open() ctrl->ops->open() /* this callback being ttyport_open() */ tty->ops->open() /* this callback being uart_open() */ tty_port_open() port->ops->activate() /* this callback being uart_port_activate() */ Find bit UPF_DEAD is set in uport->flags and fail with errno -ENXIO. Fix this be clearing UPF_DEAD before tty_port_register_device_attr_serdev() note this only moves up the UPD_DEAD clearing a small bit, before: tty_port_register_device_attr_serdev(); mutex_unlock(&tty_port.mutex); uart_port.flags &= ~UPF_DEAD; mutex_unlock(&port_mutex); after: uart_port.flags &= ~UPF_DEAD; tty_port_register_device_attr_serdev(); mutex_unlock(&tty_port.mutex); mutex_unlock(&port_mutex); Reported-by: Weifeng Liu <weifeng.liu.z@gmail.com> Closes: https://lore.kernel.org/platform-driver-x86/20240505130800.2546640-1-weifeng.liu.z@gmail.com/ Tested-by: Weifeng Liu <weifeng.liu.z@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240509141549.63704-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10serial: imx: Raise TX trigger level to 8Matthias Schiffer
At the default TX trigger level of 2 in non-DMA mode (meaning that an interrupt is generated when less than 2 characters are left in the FIFO), we have observed frequent buffer underruns at 115200 Baud on an i.MX8M Nano. This can cause communication issues if the receiving side expects a continuous transfer. Increasing the level to 8 makes the UART trigger an interrupt earlier, giving the kernel enough time to refill the FIFO, at the cost of triggering one interrupt per ~24 instead of ~30 bytes of transmitted data (as the i.MX UART has a 32 byte FIFO). Signed-off-by: Michael Krummsdorf <michael.krummsdorf@tq-group.com> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20240508133744.35858-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10serial: 8250_pnp: Simplify "line" related codeIlpo Järvinen
8250_pnp sets drvdata to line + 1 if the probe is successful. The users of drvdata are in remove, suspend and resume callbacks, none of which will be called if probe failed. The line acquired from drvdata can never be zero in those functions and the checks for that can be removed. Eliminate also +/-1 step because all users of line subtract 1 from the value. These might have been leftover from legacy PM callbacks that could be called without probe being successful. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240506121202.11253-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10serial: sh-sci: simplify locking when re-issuing RXDMA failsWolfram Sang
Avoid a superfluous unlock/lock-pair by simply moving the printout to the end of bailing out. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20240506114016.30498-10-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10serial: sh-sci: let timeout timer only run when DMA is scheduledWolfram Sang
The hrtimer for RXDMA timeout was unconditionally restarted in the RXDMA complete handler ignoring the fact that setting up DMA may fail and PIO is used instead. Explicitly stop the timer when DMA is completed and only restart it when setting up DMA was successful. This makes the intention of the timer much clearer, the driver easier to understand and simplifies assumptions about the timer. The latter avoids race conditions if these assumptions were not met or confused. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20240506114016.30498-9-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10serial: sh-sci: describe locking requirements for invalidating RXDMAWolfram Sang
Make sure everyone knows that calling this function needs protection. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20240506114016.30498-8-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10serial: sh-sci: protect invalidating RXDMA on shutdownWolfram Sang
The to-be-fixed commit removed locking when invalidating the DMA RX descriptors on shutdown. It overlooked that there is still a rx_timer running which may still access the protected data. So, re-add the locking. Reported-by: Dirk Behme <dirk.behme@de.bosch.com> Closes: https://lore.kernel.org/r/ee6c9e16-9f29-450e-81da-4a8dceaa8fc7@de.bosch.com Fixes: 2c4ee23530ff ("serial: sh-sci: Postpone DMA release when falling back to PIO") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20240506114016.30498-7-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescalerHugo Villeneuve
When using a high speed clock with a low baud rate, the 4x prescaler is automatically selected if required. In that case, sc16is7xx_set_baud() properly configures the chip registers, but returns an incorrect baud rate by not taking into account the prescaler value. This incorrect baud rate is then fed to uart_update_timeout(). For example, with an input clock of 80MHz, and a selected baud rate of 50, sc16is7xx_set_baud() will return 200 instead of 50. Fix this by first changing the prescaler variable to hold the selected prescaler value instead of the MCR bitfield. Then properly take into account the selected prescaler value in the return value computation. Also add better documentation about the divisor value computation. Fixes: dfeae619d781 ("serial: sc16is7xx") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20240430200431.4102923-1-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_bcm7271: use default_mux_rate if possibleDoug Berger
There is a scenario when resuming from some power saving states with no_console_suspend where console output can be generated before the 8250_bcm7271 driver gets the opportunity to restore the baud_mux_clk frequency. Since the baud_mux_clk is at its default frequency at this time the output can be garbled until the driver gets the opportunity to resume. Since this is only an issue with console use of the serial port during that window and the console isn't likely to use baud rates that require alternate baud_mux_clk frequencies, allow the driver to select the default_mux_rate if it is accurate enough. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Cc: stable@vger.kernel.org Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240424222559.1844045-1-opendmb@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8520_mtk: Set RTS on shutdown for Rx in-band wakeupPin-yen Lin
When Rx in-band wakeup is enabled, set RTS to true in mtk8250_shutdown() so the connected device can still send message and trigger IRQ when the system is suspended. Fixes: 18c9d4a3c249 ("serial: When UART is suspended, set RTS to false") Cc: stable <stable@kernel.org> Signed-off-by: Pin-yen Lin <treapking@chromium.org> Link: https://lore.kernel.org/r/20240424130619.2924456-1-treapking@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: core: Call device_set_awake_path() for console portClaudiu Beznea
In case the UART port is used as a console, no_console_suspend is available in bootargs and UART port is part of a software-controlled power domain we need to call device_set_awake_path(). This lets the power domain core code know that this domain should not be powered off during system suspend. Otherwise, the UART port power domain is turned off, nothing is printed while suspending and the suspend/resume process is blocked. This was detected on the Renesas RZ/G3S SoC while adding support for power domains. Based on code investigation (on v6.9-rc5), this issue is present on other SoCs (e.g., Renesas R-Mobile A1 [1], IMX8QXP [2]) and different SoCs have particular implementation to handle it. Due to this the patch added the call of device_set_awake_path() in uart_suspend_port() instead of having it in the platform specific UART driver. [1] drivers/pmdomain/renesas/rmobile-sysc.c:116 [2] drivers/pmdomain/imx/scu-pd.c:357 Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20240430095930.2806067-1-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04tty: serial: uartps: Add support for uartps controller resetManikanta Guntupalli
Add support for an optional reset for the uartps controller using the reset driver. If the uartps node contains the "resets" property, then cdns_uart_startup performs uartps controller non-pulse out of reset and reset in exit path. Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Link: https://lore.kernel.org/r/20240425062358.1347684-4-manikanta.guntupalli@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()Andy Shevchenko
The SIMPLE_DEV_PM_OPS() is deprecated, replace it with the DEFINE_SIMPLE_DEV_PM_OPS() and use pm_sleep_ptr() for setting the driver's PM routines. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20240422083237.207447-1-andy.shevchenko@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Keep the includes sortedAndy Shevchenko
Keep the includes sorted. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-14-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()Andy Shevchenko
Make type of bit parameter and returned one the same in exar_ee_*_bit(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-13-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Use BIT() in exar_ee_read()Andy Shevchenko
Use BIT() in exar_ee_read() like other functions do. While at it, explain the EEPROM type and the dummy bit requirement. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-12-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Switch to use dev_err_probe()Andy Shevchenko
Switch to use dev_err_probe() to simplify the error path and unify a message template. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-11-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Return directly from switch-casesAndy Shevchenko
There are two similar switch-cases which use different style. Unify them and one more to return from the cases directly. While at it, add missing default in another switch-case. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-10-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Decrease indentation levelAndy Shevchenko
Decrease indentation level in some places. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-9-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Kill unneeded ->board_init()Andy Shevchenko
We may reuse ->setup() for the same purpose as it was done before. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-8-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Extract cti_board_init_osc_freq() helperAndy Shevchenko
Extract cti_board_init_osc_freq() helper to avoid code duplication. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-7-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Trivia typo fixesAndy Shevchenko
Trivia typo fixes: interupts --> interrupts and others. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-6-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Use PCI_SUBVENDOR_ID_IBM for subvendor IDAndy Shevchenko
Use PCI_SUBVENDOR_ID_IBM for subvendor ID instead of vendor one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-5-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Kill CTI_PCI_DEVICE()Andy Shevchenko
The CTI_PCI_DEVICE() duplicates EXAR_DEVICE(). Kill the former. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Describe all parameters in kernel docAndy Shevchenko
Kernel doc validator is not happy: warning: Function parameter or struct member 'pcidev' not described in 'cti_get_port_type_xr17c15x_xr17v25x' warning: Function parameter or struct member 'pcidev' not described in 'cti_get_port_type_fpga' warning: Function parameter or struct member 'pcidev' not described in 'cti_get_port_type_xr17v35x' Add missed descriptions. Fixes: f7ce07062988 ("serial: exar: add CTI specific setup code") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Don't return positive values as error codesAndy Shevchenko
PCI core may return positive codes for the specific errors. There is a special API to convert them to negative stanrard ones. Use that API to avoid returning positive values as error codes. Fixes: f7ce07062988 ("serial: exar: add CTI specific setup code") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-03alpha: remove DECpc AXP150 (Jensen) supportArnd Bergmann
This is one of the hackiest Alpha machines, and the only one without PCI support. Removing this allows cleaning up code in eise and tty drivers in addition to the architecture code. Acked-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-04-26serial: kgdboc: Fix NMI-safety problems from keyboard reset codeDaniel Thompson
Currently, when kdb is compiled with keyboard support, then we will use schedule_work() to provoke reset of the keyboard status. Unfortunately schedule_work() gets called from the kgdboc post-debug-exception handler. That risks deadlock since schedule_work() is not NMI-safe and, even on platforms where the NMI is not directly used for debugging, the debug trap can have NMI-like behaviour depending on where breakpoints are placed. Fix this by using the irq work system, which is NMI-safe, to defer the call to schedule_work() to a point when it is safe to call. Reported-by: Liuye <liu.yeC@h3c.com> Closes: https://lore.kernel.org/all/20240228025602.3087748-1-liu.yeC@h3c.com/ Cc: stable@vger.kernel.org Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240424-kgdboc_fix_schedule_work-v2-1-50f5a490aec5@linaro.org Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2024-04-25tty: 8250_pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACYDamien Le Moal
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro. Link: https://lore.kernel.org/r/20240325070944.3600338-7-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23Merge 6.9-rc5 into tty-nextGreg Kroah-Hartman
We want the tty fixes in here as well, and it resolves a merge conflict in: drivers/tty/serial/serial_core.c as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-20serial: msm: check dma_map_sg() return value properlyJiri Slaby (SUSE)
The -next commit f8fef2fa419f (tty: msm_serial: use dmaengine_prep_slave_sg()), switched to using dma_map_sg(). But the return value of dma_map_sg() is special: it returns number of elements mapped. And not a standard error value. The commit also forgot to reset dma->tx_sg in case of this failure. Fix both these mistakes. Thanks to Marek who helped debugging this. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20240419080931.30949-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: fix checkpach warningsParker Newman
-Fix several "missing identifier name" warnings from checkpatch in struct exar8250_platform and struct exar8250_board. Example: WARNING: function definition argument <arg> should also have an identifier name - Fix space before tab warning from checkpatch: WARNING: please, no space before tabs + * 0^I^I2 ^IMode bit 0$ Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/f7fa6c16cb5f2c8c1c7cb7d29f80bc7be53f91ab.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: add CTI specific setup codeParker Newman
This is a large patch but is only additions. All changes and removals are made in previous patches in this series. - Add CTI board_init and port setup functions for each UART type - Add CTI_EXAR_DEVICE() and CTI_PCI_DEVICE() macros - Add support for reading a word from the Exar EEPROM. - Add support for configuring and setting a single MPIO - Add various helper functions for CTI boards. - Add osc_freq to struct exar8250 Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/ae4a66e7342b686cb8d4b15317585dfb37222cf4.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: add CTI cards to exar_get_nr_portsParker Newman
Add code for getting number of ports of CTI cards to exar_get_nr_ports(). Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/0c64bdf852f39aec966b38696695d951e485d7e6.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: moved generic_rs485 further up in 8250_exar.cParker Newman
Preparatory patch moving generic_rs485_config and generic_rs485_supported higher in the file to allow for CTI setup functions to use them. Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/a7bf2a42de759908c058246ec15f60bde9a5dc65.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: add optional board_init functionParker Newman
Add an optional "board_init()" function pointer to struct exar8250_board which is called once during probe prior to setting up the ports. It will be used in subsequent patches of this series. Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/0e72a3154114c733283ff273bc1e31456ee101f4.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: added a exar_get_nr_ports functionParker Newman
Moved code for getting number of ports from exar_pci_probe() to a separate exar_get_nr_ports() function. CTI specific code will be added in another patch in this series. Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/33f2bf66bc334573c10cf670a299ecef0b7264bc.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: remove old Connect Tech setupParker Newman
Preparatory patch removing existing Connect Tech setup code and CONNECT_DEVICE macro. Subsequent patches in this series will add in new UART family specific setup code and new device definition macros to allow for supporting CTI serial cards with Exar PCI IDs and CTI PCI IDs. Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/06a04b6c683ca20c50646cc0836be869c2dacd87.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: stm32: Reset .throttled state in .startup()Uwe Kleine-König
When an UART is opened that still has .throttled set from a previous open, the RX interrupt is enabled but the irq handler doesn't consider it. This easily results in a stuck irq with the effect to occupy the CPU in a tight loop. So reset the throttle state in .startup() to ensure that RX irqs are handled. Fixes: d1ec8a2eabe9 ("serial: stm32: update throttle and unthrottle ops for dma mode") Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/a784f80d3414f7db723b2ec66efc56e1ad666cbf.1713344161.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: stm32: Return IRQ_NONE in the ISR if no handling happendUwe Kleine-König
If there is a stuck irq that the handler doesn't address, returning IRQ_HANDLED unconditionally makes it impossible for the irq core to detect the problem and disable the irq. So only return IRQ_HANDLED if an event was handled. A stuck irq is still problematic, but with this change at least it only makes the UART nonfunctional instead of occupying the (usually only) CPU by 100% and so stall the whole machine. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/5f92603d0dfd8a5b8014b2b10a902d91e0bb881f.1713344161.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: exar: adding missing CTI and Exar PCI idsParker Newman
- Added Connect Tech and Exar IDs not already in pci_ids.h Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/7c3d8e795a864dd9b0a00353b722060dc27c4e09.1713270624.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: 8250_pnp: Support configurable reg shift propertyGuanbing Huang
The 16550a serial port based on the ACPI table requires obtaining the reg-shift attribute. In the ACPI scenario, If the reg-shift property is not configured like in DTS, the 16550a serial driver cannot read or write controller registers properly during initialization. Signed-off-by: Guanbing Huang <albanhuang@tencent.com> Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bing Fan <tombinfan@tencent.com> Tested-by: Linheng Du <dylanlhdu@tencent.com> Link: https://lore.kernel.org/r/4726ecea8f7bfbfe42501b4f6ad9fe5b38994574.1713234515.git.albanhuang@tencent.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: port: Add support of PNP IRQ to __uart_read_properties()Guanbing Huang
The function __uart_read_properties doesn't cover PNP devices, so add IRQ processing for PNP devices in the branch. Signed-off-by: Guanbing Huang <albanhuang@tencent.com> Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bing Fan <tombinfan@tencent.com> Tested-by: Linheng Du <dylanlhdu@tencent.com> Link: https://lore.kernel.org/r/7f4ca31ef1cab4c6ecad22fafd82117686b696be.1713234515.git.albanhuang@tencent.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 09:46:49 +0000