summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
AgeCommit message (Collapse)Author
2014-11-20usb: gadget: at91_udc: move prepare clk into process contextRonald Wahl
Commit 7628083227b6bc4a7e33d7c381d7a4e558424b6b (usb: gadget: at91_udc: prepare clk before calling enable) added clock preparation in interrupt context. This is not allowed as it might sleep. Also setting the clock rate is unsafe to call from there for the same reason. Move clock preparation and setting clock rate into process context (at91udc_probe). Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Felipe Balbi <balbi@ti.com> Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-20usb: gadget: atmel_usba_udc: remove release functionBo Shen
As the driver call usb_add_gadget_udc --> usb_add_gadget_udc_release with NULL as release parameter, so it will use usb_udc_no_release. So, the release in driver won't used, remove it. And at the same time, in the usb_add_gadget_udc_release will set the gadget name, so remove it also in driver. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-20usb: gadget: at91_udc: remove unused release functionBo Shen
As the driver call usb_add_gadget_udc --> usb_add_gadget_udc_release with NULL as release parameter, so it will use usb_udc_no_release. So, the release in driver won't used, remove it. And at the same time, in the usb_add_gadget_udc_release will set the gadget name, so remove it also in driver. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-20usb: gadget: add USB3 support to the printer driverJorge Ramirez-Ortiz
Add SS descriptors to support the capabilities provided by USB3 controller drivers; unit tests run using a PLX 3380 [max transfer speed measured of 1Gbps] This driver shall fallback to lower operating modes when the higher ones are not available. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-20treewide: fix typo in printk and KconfigMasanari Iida
This patch fix spelling typo in printk and Kconfig within various part of kernel sources. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-20Merge Linus' tree to be be to apply submitted patches to newer code thanJiri Kosina
current trivial.git base
2014-11-18usb: gadget: f_hid: fix error handling in ghid_setup()Dan Carpenter
There were a two issues here. 1) We returned PTR_ERR(NULL) which means success if class_create() failed. 2) If alloc_chrdev_region() failed then we should clean up before returning. Also kernel style is to have "error handling" as opposed to "success handling". In the original code checking for "if (!status) " is confusing and this bad style is what lead to bug #2. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-18usb: gadget: f_hid: use after free in hidg_alloc_inst()Dan Carpenter
We free "opts" on the error path and then dereference it. Fixes: 21a9476a7ba8 ('usb: gadget: hid: add configfs support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-18usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDCAshwini Pahuja
This patch adds a UDC driver for Broadcom's USB3.0 Peripheral core named BDC. BDC supports control traffic on ep0 and bulk/Int/Isoch traffic on all other endpoints. [ balbi@ti.com : fix build error on randconfig due to lack of <linux/dmapool.h> ] Signed-off-by: Ashwini Pahuja <ashwini.linux@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/chelsio/cxgb4vf/sge.c drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c sge.c was overlapping two changes, one to use the new __dev_alloc_page() in net-next, and one to use s->fl_pg_order in net. ixgbe_phy.c was a set of overlapping whitespace changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12usb: gadget: midi: f_midi_alloc() can be staticFengguang Wu
drivers/usb/gadget/function/f_midi.c:1072:21: sparse: symbol 'f_midi_alloc' was not declared. Should it be static? drivers/usb/gadget/legacy/gmidi.c:118:30: sparse: symbol 'fi_midi' was not declared. Should it be static? drivers/usb/gadget/legacy/gmidi.c:119:21: sparse: symbol 'f_midi' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12usb: gadget: f_hid: hidg_alloc() can be staticFengguang Wu
drivers/usb/gadget/function/f_hid.c:852:21: sparse: symbol 'hidg_alloc' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12phonet: Replace calls to __skb_alloc_page with __dev_alloc_pageAlexander Duyck
Replace the calls to __skb_alloc_page that are passed NULL with calls to __dev_alloc_page. In addition remove __GFP_COLD flag from allocations as we only want it for the Rx buffer which is taken care of by __dev_alloc_skb, not for any secondary allocations such as the queue element transmit descriptors. Cc: Oliver Neukum <oliver@neukum.org> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10usb: gadget: atmel_usba_udc: use udc-core's reset notifierPeter Chen
Replace usb_gadget_driver's disconnect with udc-core's reset notifier at bus reset handler. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10usb: gadget: bcm63xx_udc: use udc-core's reset notifierPeter Chen
Replace usb_gadget_driver's disconnect with udc-core's reset notifier at bus reset handler. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10usb: gadget: r8a66597-udc: use udc-core's reset notifierPeter Chen
Replace usb_gadget_driver's disconnect with udc-core's reset notifier at bus reset handler. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10usb: gadget: amd5536udc: use udc-core's reset notifierPeter Chen
Replace usb_gadget_driver's disconnect with udc-core's reset notifier at bus reset handler. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10usb: gadget: pch_udc: use udc-core's reset notifierPeter Chen
Replace usb_gadget_driver's disconnect with udc-core's reset notifier at bus reset handler. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10usb: gadget: fsl_qe_udc: use udc-core's reset notifierPeter Chen
Replace usb_gadget_driver's disconnect with udc-core's reset notifier at bus reset handler. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10usb: gadget: mv_udc_core: use udc-core's reset notifierPeter Chen
Replace usb_gadget_driver's disconnect with udc-core's reset notifier at bus reset handler. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10usb: gadget: at91_udc: use udc-core's reset notifierPeter Chen
Replace usb_gadget_driver's disconnect with udc-core's reset notifier at bus reset handler. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10usb: gadget: fsl_udc_core: use udc-core's reset notifierPeter Chen
Replace usb_gadget_driver's disconnect with udc-core's reset notifier at bus reset handler. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10usb: gadget: m66592-udc: use udc-core's reset notifierPeter Chen
Replace usb_gadget_driver's disconnect with udc-core's reset notifier at bus reset handler. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10usb: gadget: pxa25x_udc: use udc-core's reset notifierPeter Chen
Replace usb_gadget_driver's disconnect with udc-core's reset notifier at bus reset handler. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10usb: gadget: net2272: use udc-core's reset notifierAlan Stern
This patch adds support for the new udc-core reset notifier to the net2272 driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10usb: gadget: net2280: use udc-core's reset notifierAlan Stern
This patch adds support for the new udc-core reset notifier to the net2280 driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10usb: gadget: dummy-hcd: use udc-core's reset notifierAlan Stern
Replace usb_gadget_driver's disconnect with udc-core's reset notifier at bus reset handler. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Peter chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10usb: gadget: dbgp: Fix endpoint config after USB disconnectKyösti Mälkki
SET_FEATURE request with DEBUG_MODE only worked the first time after module initialisation. Per the USB 2.0 debug device specification, said request is to be treated as if it were a SET_CONFIGURATION request, i.e. endpoint must be re-configured. As configure_endpoints() may now get called multiple times, move it outside __init and move serial_alloc_tty() call into __init. Code has assumption that endpoint mapping remains unchanged with consecutive calls of configure_endpoints(). Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-10usb: gadget: pxa27x_udc: fix warning in non device-tree buildRobert Jarzmik
The recent change bringing device-tree support triggers a warning in a non device-tree build : drivers/usb/gadget/udc/pxa27x_udc.c:2405:28: warning: 'udc_pxa_dt_ids' defined but not used [-Wunused-variable] Fix the warning with a preprocessor condition. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-06usb: gadget: hid: add configfs supportAndrzej Pietrasiewicz
Make the hid function available for gadgets composed with configfs. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-06usb: gadget: f_hid: use usb_gstrings_attachAndrzej Pietrasiewicz
Before configfs is integrated the usb_gstrings_attach() interface must be used. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-06usb: gadget: f_hid: remove compatibility layerAndrzej Pietrasiewicz
There are no old function interface users left, so remove it. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-06usb: gadget: hid: convert to new interface of f_hidAndrzej Pietrasiewicz
Use the new f_hid interface in order for the old to be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-06usb: gadget: f_hid: convert to new function interface with backward ↵Andrzej Pietrasiewicz
compatibility Converting hid to the new function interface requires converting the USB hid's function code and its users. This patch converts the f_hid.c to the new function interface. The file can now be compiled into a separate usb_f_hid.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-06usb: gadget: hid: mirror init operations in module cleanupAndrzej Pietrasiewicz
So far platform driver has been unregistered first, so just after that the usb composite is still available, but there is no hid data any more. Reverse the order so that first the usb composite becomes unavailable and second the hid data goes away. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-06usb: gadget: f_hid: check return value of device_createAndrzej Pietrasiewicz
device_create() might fail, so check its return value and react appropriately. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-06usb: gadget: f_hid: check return value of class_createAndrzej Pietrasiewicz
class_create() might fail, so check its return value and react appropriately. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-05usb: gadget: f_midi: add configfs supportAndrzej Pietrasiewicz
Make the midi function available for gadgets composed with configfs. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-05usb: gadget: f_midi: use usb_gstrings_attachAndrzej Pietrasiewicz
In order to add configfs support the usb_gstrings_attach must be used. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-05usb: gadget: f_midi: remove compatibility layerAndrzej Pietrasiewicz
There are no old f_midi interface users left, so remove it. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-05usb: gadget: midi: convert to new interface of f_midiAndrzej Pietrasiewicz
Use the new f_midi interface so that the old can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-05usb: gadget: f_midi: convert to new function interface with backward ↵Andrzej Pietrasiewicz
compatibility Converting midi to the new function interface requires converting the USB midi's function code and its users. This patch converts the f_midi.c to the new function interface. The file can now be compiled into a separate usb_f_midi.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-05usb: gadget: f_midi: check kstrdup() return valueAndrzej Pietrasiewicz
kstrdup() might fail, so check its return value and react appropriately. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-05usb: gadget: f_midi: enable use of the index parameterAndrzej Pietrasiewicz
The soundcard index to use for the ALSA device creation is passed as a parameter to f_midi_bind_config(), but is assigned to midi->index only after the call to f_midi_register_card(midi). So no matter what is passed to f_midi_bind_config(), the actual index for snd_card_new() is always 0. This probably works ok if at the moment of f_midi's bind there are no other snd_cards, but if there are, it is not possible to bind f_midi. This patch moves the assignment to a place before the call to f_midi_register_card(midi). Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-05usb: gadget: Kconfig: enable separate compilation of uac1/uac2 functionsAndrzej Pietrasiewicz
uac1 and uac2 functions are available through the configfs interface and it should be possible to build them without building their legacy gadgets. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-11-03usb: gadget: fix ptr_ret.cocci warningsFengguang Wu
drivers/usb/gadget/udc/r8a66597-udc.c:1849:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03usb: gadget: function: Added usb_assign_descriptors failure checkPavitrakumar Managutte
Added failure check for usb_assign_descriptors call in bind function. Acked-By: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Pavitrakumar Managutte <pavitra1729@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03usb: gadget: udc: pxa27x: do not call usb_gadget_unregister_driver()Felipe Balbi
that call is completely unnecessary because usb_del_gadget_udc() already makes sure the gadget driver is properly unregistered from the UDC. Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03usb: gadget: udc: net2272: do not call usb_gadget_unregister_driver()Felipe Balbi
that call is completely unnecessary because usb_del_gadget_udc() already makes sure the gadget driver is properly unregistered from the UDC. Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit (git 2.34.1) at 2025-09-23 01:14:40 +0000