summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
AgeCommit message (Collapse)Author
2014-09-03usb: gadget: fusb300_udc.h: Fix typo in include guardRasmus Villemoes
Clearly this was meant to be an include guard, but a trailing underscore was missing. It has been this way since the file was introduced in 0fe6f1d1 ("usb: udc: add Faraday fusb300 driver"). Fixes: 0fe6f1d1 ("usb: udc: add Faraday fusb300 driver") Cc: <stable@vger.kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-03usb: gadget: net2280: Fix invalid handling of Reset irqRicardo Ribalda Delgado
Without this patch, some hosts keep restarting indefinitely the target. Fixes: ae8e530 (usb: gadget: net2280: Code Cleanup) Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-02usb: gadget: f_uac2: send reasonably sized packetsDaniel Mack
The UAC2 function driver currently responds to all packets at all times with wMaxPacketSize packets. That results in way too fast audio playback as the function driver (which is in fact supposed to define the audio stream pace) delivers as fast as it can. Fix this by sizing each packet correctly with the following steps: a) Set the packet's size by dividing the nominal data rate by the playback endpoint's interval. b) If there is a residual value from the calculation in a), add it to a accumulator to keep track of it across packets. c) If the accumulator has gathered at least the number of bytes that are needed for one sample frame, increase the packet size. This way, the packet size calculation will get rid of any kind of imprecision that would otherwise occur with a simple division over time. Some of the variables that are needed while processing each packet are pre-computed for performance reasons. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-02usb: gadget: f_uac2: handle partial dma area wrapDaniel Mack
With packet sizes other than 512, payloads in the packets may wrap around the ALSA dma buffer partially, which leads to memory corruption and audible clicks and pops in the audio stream at the moment, because there is no boundary check before the memcpy(). In preparation to an implementation for smaller and dynamically sized packets, we have to address such cases, and copy the payload in two steps conditionally. The 'src' and 'dst' approach doesn't work here anymore, as different behavior is necessary in playback and capture cases. Thus, this patch open-codes the routine now. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-02usb: gadget: f_uac2: introduce agdev_to_uac2_optsDaniel Mack
Add a simple container_of() wrapper to get a struct f_uac2_opts from a struct struct audio_dev. Use it in two places where it is currently open-coded. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-02usb: gadget: f_uac2: add short-hand for 'dev'Daniel Mack
In afunc_bind() and afunc_set_alt(), &uac2->pdev.dev are used multiple times. Adding a short-hand for them makes lines shorter so we can remove some line wraps. No functional change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-02usb: gadget: f_uac2: restructure some code in afunc_set_alt()Daniel Mack
Restructure some code to make it easier to read. While at it, return -ENOMEM instead of -EINVAL if usb_ep_alloc_request() fails, and omit the logging in such cases (the mm core will complain loud enough). Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-02usb: gadget: f_mass_storage: simplify start_transfer slightlyMichal Nazarewicz
Flatten the start_transfer function by reversing the if condition and returning early out of the function if everything went fine. It makes the function look less complicated, at least to me, and easier to understand. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-02usb: gadget: composite: dequeue cdev->req before free its bufferLi Jun
commit f226708(usb: gadget: composite: dequeue cdev->req before free it in composite_dev_cleanup) fixed a bug: free the usb request(i.e. cdev->req) but does not dequeue it beforehand. This fix is not proper enough because it dequeues the request after free its data buffer, considering the hardware can access the buffer's memory anytime before the request's complettion rountine runs, and usb_ep_dequeue always call the complettion rountine before it returns, so the best way is to dequeue the request before free its buffer. Suggested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-02usb: gadget: USB_RENESAS_USBHS_UDC should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `usbhsg_dma_map_ctrl': mod_gadget.c:(.text+0x53b226): undefined reference to `usb_gadget_map_request' mod_gadget.c:(.text+0x53b242): undefined reference to `usb_gadget_unmap_request' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-29usb: gadget: use $(srctree) instead of $(PWD) for includesYegor Yefremov
Using $(PWD) breaks builds when make was invoked from outside of the kernel tree. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-29usb: gadget: udc: use USB API functions rather than constantsHimangi Saraogi
This patch introduces the use of the functions usb_endpoint_type and usb_endpoint_num. The Coccinelle semantic patch that makes these changes is as follows: @@ struct usb_endpoint_descriptor *epd; @@ - (epd->bEndpointAddress & \(USB_ENDPOINT_NUMBER_MASK\|0x0f\)) + usb_endpoint_num(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) + usb_endpoint_type(epd) Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-27f_ncm: Don't use netdev_start_xmit().David S. Miller
Unfortunately, the USB gadget layer has this weird things where NULL skbs are passed into ops->ndo_start_xmit() in order to trigger the dev->wrap() calls to build packets. This is completely outside of the allowable range of sane arguments for the ndo_start_xmit method. All invocations of ndo_start_xmit() should be with non-NULL SKB arguments. Put back the direct call, but with a comment explaining how this is not acceptable in the long term. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27usb: gadget: zero: Add support for interrupt EPAmit Virdi
Interrupt endpoints behave quite similar to the bulk endpoints with the difference that the endpoints expect data sending/reception request at particular intervals till the whole data has not been transmitted. The interrupt EP support is added to gadget zero. A new alternate setting (=2) has been added. It has 2 interrupt endpoints. The default parameters are set as: bInterval: 1 ms for FS and 8 uFrames (implying 1 ms) for HS/SS wMaxPacketSize: 64 bytes for FS and 1024 bytes for HS/SS However, the same can be overridden through the module parameter interface. The code is tested for HS and SS on a platform having DWC3 controller. Signed-off-by: Amit Virdi <amit.virdi@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-27usb: gadget: serial: remove PREFIX macroRichard Leitner
Remove the ttyGS PREFIX macro from u_serial.c and replace all occurences with the hardcoded ttyGS string. This macro was mostly used in a few debug/warning messages and a lot of hardcoded ttyGS existed beneath. It may have been used for renaming the tty, but if done so most debug messages would have ignored this. Due to the fact the usage of this PREFIX in all debug calls would have resulted in a hard to read/grep code it is removed completely. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-27usb: gadget: serial: replace {V,}DBG macro with dev_{v,}dbgRichard Leitner
Replace the VDBG and DBG macro with the kernels "proper" debug macros (dev_vdbg and dev_dbg) in f_acm.c, f_obex.c & f_serial.c Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-24net: Add ops->ndo_xmit_flush()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-21usb: gadget: uvc: remove DRIVER_VERSION{,_NUMBER}Michael Grzeschik
As the driver is in mainline we can remove the version numbers. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-21usb: gadget: f_uvc: fix potential memory leakAndrzej Pietrasiewicz
If uvc->control_buf is successfuly allocated but uvc->control_req is not, uvc->control_buf is not freed in the error recovery path. With this patch applied uvc->control_buf is freed unconditionally; if it happens to be NULL kfree on it is safe anyway. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-21usb: gadget: uvc: Add support for DMABUF importingPhilipp Zabel
Activate the videobuf2 DMABUF support. As vb2-vmalloc supports the importer role only, exporting buffers isn't supported yet. When the exporter role will be implemented in vb2-vmalloc the UVC gadget driver will automatically gain support for it. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-21usb: gadget: uvc: Change KERN_INFO to KERN_DEBUG on request shutdownMichael Grzeschik
The disconnect of the USB Device is a common pattern for an UVC Camera. In many cases this will give us an meaningless information for all buffers that couldn't be enqueued. That patch changes this to KERN_DEBUG. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: f_uac1: add configfs supportAndrzej Pietrasiewicz
Add support for using f_uac1 function as a component of a gadget composed with configfs. Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: f_uac1: use defined constants as defaultsAndrzej Pietrasiewicz
When configfs support is added the values in question will have to be used in two different places. Substitute them with defined constants to avoid duplicating magic numbers. Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: f_uac1: use usb_gstrings_attachAndrzej Pietrasiewicz
Use the new usb_gstring_attach interface. Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: f_uac1: remove compatibility layerAndrzej Pietrasiewicz
There are no users of the old interface left, so it can be removed. Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: audio: convert to new interface of f_uac1Andrzej Pietrasiewicz
Use the new interface so that the old one can be removed. Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: f_uac1: convert to new function interface with backward ↵Andrzej Pietrasiewicz
compatibility Converting uac1 to the new function interface requires converting the USB uac1's function code and its users. This patch converts the f_uac1.c to the new function interface. The file is now compiled into a separate usb_f_uac1.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: f_uac1: prepare for separate compilationAndrzej Pietrasiewicz
Integrating configfs requires converting f_uac1 to new function interface, which in turn requires converting it to the new function interface, which involves separate compilation of f_uac1.c into usb_f_uac1.ko. u_uac1.c contains some module parameters. After this patch is applied they are still a part of the resulting g_audio.ko, but can be guarded with a compatiblity flag which will be removed when no users of the old function interface of f_uac1 are left. Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: f_uac1: add function stringsAndrzej Pietrasiewicz
uac1 function is missing strings. Add them. Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: f_uac2: add configfs supportAndrzej Pietrasiewicz
Add support for using f_uac2 function as a component of a gadget composed with configfs. Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: f_uac2: use defined constants as defaultsAndrzej Pietrasiewicz
When configfs is integrated the same values will have to be used as defaults. Use symbolic names in order not to duplicate magic numbers. Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: f_uac2: use usb_gstrings_attachAndrzej Pietrasiewicz
Use the new usb_gstring_attach interface. Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: f_uac2: remove compatibility layerAndrzej Pietrasiewicz
There are no users of the old interface left, so it can be removed. Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: audio: convert to new interface of f_uac2Andrzej Pietrasiewicz
Use the new interface so that the old one can be removed. Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: f_uac2: convert to new function interface with backward ↵Andrzej Pietrasiewicz
compatibility Converting uac2 to the new function interface requires converting the USB uac2's function code and its users. This patch converts the f_uac2.c to the new function interface. The file is now compiled into a separate usb_f_uac2.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: audio: Use container_of to free audio_devAndrzej Pietrasiewicz
Eliminate static struct *agdev_g from f_uac2.c. It is used for freeing its memory, but the same address can be found by calling container_of in afunc_unbind(). This implies eliminating uac2_unbind_config(). The audio_config_driver in audio.c does not have its unbind method any more. It has been used only when uac2 is used, so uac2 itself can handle unbinding in afunc_unbind(). Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: Remove redundant dev_err call in r8a66597_sudmac_ioremap()Wei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: gadget: remove $(PWD) in ccflags-yPhilippe Reynes
The variable $(PWD) is useless, and it may break the compilation. For example, it breaks the kernel compilation when it's done with buildroot : /home/trem/Codes/armadeus/armadeus/buildroot/output/host/usr/bin/ccache /home/trem/Codes/armadeus/armadeus/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc -Wp,-MD,drivers/usb/gadget/legacy/.hid.o.d -nostdinc -isystem /home/trem/Codes/armadeus/armadeus/buildroot/output/host/usr/lib/gcc/arm-buildroot-linux-uclibcgnueabi/4.7.3/include -I./arch/arm/include -Iarch/arm/include/generated -Iinclude -I./arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I./include/uapi -Iinclude/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-dwarf2-cfi-asm -mabi=aapcs-linux -mno-thumb-interwork -mfpu=vfp -funwind-tables -marm -D__LINUX_ARM_ARCH__=5 -march=armv5te -mtune=arm9tdmi -msoft-float -Uarm -fno-delete-null-pointer-checks -O2 --param=allow-store-data-races=0 -Wframe-larger-than=1024 -fno-stack-protector -Wno-unused-but-set-variable -fomit-frame-pointer -fno-var-tracking-assignments -g -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -DCC_HAVE_ASM_GOTO -I/home/trem/Codes/armadeus/armadeus/buildroot/drivers/usb/gadget/ -I/home/trem/Codes/armadeus/armadeus/buildroot/drivers/usb/gadget/udc/ -I/home/trem/Codes/armadeus/armadeus/buildroot/drivers/usb/gadget/function/ -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(hid)" -D"KBUILD_MODNAME=KBUILD_STR(g_hid)" -c -o drivers/usb/gadget/legacy/hid.o drivers/usb/gadget/legacy/hid.c drivers/usb/gadget/epautoconf.c:23:26: erreur fatale: gadget_chips.h : Aucun fichier ou dossier de ce type This compilation line include : ..../buildroot/driver/usb/gadget but the real path is : ..../buildroot/output/build/linux-3.17-rc1/driver/usb/gadget Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: pch_udc: usb gadget device support for Intel Quark X1000Bryan O'Donoghue
This patch is to enable the USB gadget device for Intel Quark X1000 Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@intel.com> Signed-off-by: Bing Niu <bing.niu@intel.com> Signed-off-by: Alvin (Weike) Chen <alvin.chen@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-19usb: gadget: uvc: fix possible lockup in uvc gadgetMichael Grzeschik
If the pending buffers in the queue could not be pushed to the udc endpoint we have to cancel the uvc_queue. Otherwise the gadget will get stuck on this error. This patch calls uvc_queue_cancel if usb_ep_queue failed. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-19Revert "usb: gadget: u_ether: synchronize with transmit when stopping queue"Li RongQing
This reverts commit a9232076374334ca2bc2a448dfde96d38a54349a. It introduced a dead lock, and did not fix anything. it made netif_tx_lock() be called in IRQ context, but in softirq context, the same lock is locked without disabling IRQ. In fact, the commit a923207637 did not fix anything, since netif_stop_queue did not free the any resource [ 10.154920] ================================= [ 10.156026] [ INFO: inconsistent lock state ] [ 10.156026] 3.16.0-rc5+ #13 Not tainted [ 10.156026] --------------------------------- [ 10.156026] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 10.156026] swapper/1/0 [HC0[0]:SC1[5]:HE1:SE0] takes: [ 10.156026] (_xmit_ETHER){?.-...}, at: [<80948b6a>] sch_direct_xmit+0x7a/0x250 [ 10.156026] {IN-HARDIRQ-W} state was registered at: [ 10.156026] [<804811f0>] __lock_acquire+0x800/0x17a0 [ 10.156026] [<804828ba>] lock_acquire+0x6a/0xf0 [ 10.156026] [<809ed477>] _raw_spin_lock+0x27/0x40 [ 10.156026] [<8088d508>] gether_disconnect+0x68/0x280 [ 10.156026] [<8088e777>] eem_set_alt+0x37/0xc0 [ 10.156026] [<808847ce>] composite_setup+0x30e/0x1240 [ 10.156026] [<8088b8ae>] pch_udc_isr+0xa6e/0xf50 [ 10.156026] [<8048abe8>] handle_irq_event_percpu+0x38/0x1e0 [ 10.156026] [<8048adc1>] handle_irq_event+0x31/0x50 [ 10.156026] [<8048d94b>] handle_fasteoi_irq+0x6b/0x140 [ 10.156026] [<804040a5>] handle_irq+0x65/0x80 [ 10.156026] [<80403cfc>] do_IRQ+0x3c/0xc0 [ 10.156026] [<809ee6ae>] common_interrupt+0x2e/0x34 [ 10.156026] [<804668c5>] finish_task_switch+0x65/0xd0 [ 10.156026] [<809e89df>] __schedule+0x20f/0x7d0 [ 10.156026] [<809e94aa>] schedule_preempt_disabled+0x2a/0x70 [ 10.156026] [<8047bf03>] cpu_startup_entry+0x143/0x410 [ 10.156026] [<809e2e61>] rest_init+0xa1/0xb0 [ 10.156026] [<80ce2a3b>] start_kernel+0x336/0x33b [ 10.156026] [<80ce22ab>] i386_start_kernel+0x79/0x7d [ 10.156026] irq event stamp: 52070 [ 10.156026] hardirqs last enabled at (52070): [<809375de>] neigh_resolve_output+0xee/0x2a0 [ 10.156026] hardirqs last disabled at (52069): [<809375a8>] neigh_resolve_output+0xb8/0x2a0 [ 10.156026] softirqs last enabled at (52020): [<8044401f>] _local_bh_enable+0x1f/0x50 [ 10.156026] softirqs last disabled at (52021): [<80404036>] do_softirq_own_stack+0x26/0x30 [ 10.156026] [ 10.156026] other info that might help us debug this: [ 10.156026] Possible unsafe locking scenario: [ 10.156026] [ 10.156026] CPU0 [ 10.156026] ---- [ 10.156026] lock(_xmit_ETHER); [ 10.156026] <Interrupt> [ 10.156026] lock(_xmit_ETHER); [ 10.156026] [ 10.156026] *** DEADLOCK *** [ 10.156026] [ 10.156026] 4 locks held by swapper/1/0: [ 10.156026] #0: (((&idev->mc_ifc_timer))){+.-...}, at: [<8044b100>] call_timer_fn+0x0/0x190 [ 10.156026] #1: (rcu_read_lock){......}, at: [<a0577c40>] mld_sendpack+0x0/0x590 [ipv6] [ 10.156026] #2: (rcu_read_lock_bh){......}, at: [<a055680c>] ip6_finish_output2+0x4c/0x7f0 [ipv6] [ 10.156026] #3: (rcu_read_lock_bh){......}, at: [<8092e510>] __dev_queue_xmit+0x0/0x5f0 [ 10.156026] [ 10.156026] stack backtrace: [ 10.156026] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-rc5+ #13 [ 10.156026] 811dbb10 00000000 9e919d10 809e6785 9e8b8000 9e919d3c 809e561e 80b95511 [ 10.156026] 80b9545a 80b9543d 80b95450 80b95441 80b957e4 9e8b84e0 00000002 8047f7b0 [ 10.156026] 9e919d5c 8048043b 00000002 00000000 9e8b8000 00000001 00000004 9e8b8000 [ 10.156026] Call Trace: [ 10.156026] [<809e6785>] dump_stack+0x48/0x69 [ 10.156026] [<809e561e>] print_usage_bug+0x18f/0x19c [ 10.156026] [<8047f7b0>] ? print_shortest_lock_dependencies+0x170/0x170 [ 10.156026] [<8048043b>] mark_lock+0x53b/0x5f0 [ 10.156026] [<804810cf>] __lock_acquire+0x6df/0x17a0 [ 10.156026] [<804828ba>] lock_acquire+0x6a/0xf0 [ 10.156026] [<80948b6a>] ? sch_direct_xmit+0x7a/0x250 [ 10.156026] [<809ed477>] _raw_spin_lock+0x27/0x40 [ 10.156026] [<80948b6a>] ? sch_direct_xmit+0x7a/0x250 [ 10.156026] [<80948b6a>] sch_direct_xmit+0x7a/0x250 [ 10.156026] [<8092e6bf>] __dev_queue_xmit+0x1af/0x5f0 [ 10.156026] [<80947fc0>] ? ether_setup+0x80/0x80 [ 10.156026] [<8092eb0f>] dev_queue_xmit+0xf/0x20 [ 10.156026] [<8093764c>] neigh_resolve_output+0x15c/0x2a0 [ 10.156026] [<a0556927>] ip6_finish_output2+0x167/0x7f0 [ipv6] [ 10.156026] [<a0559b05>] ip6_finish_output+0x85/0x1c0 [ipv6] [ 10.156026] [<a0559cb7>] ip6_output+0x77/0x240 [ipv6] [ 10.156026] [<a0578163>] mld_sendpack+0x523/0x590 [ipv6] [ 10.156026] [<80480501>] ? mark_held_locks+0x11/0x90 [ 10.156026] [<a057947d>] mld_ifc_timer_expire+0x15d/0x280 [ipv6] [ 10.156026] [<8044b168>] call_timer_fn+0x68/0x190 [ 10.156026] [<a0579320>] ? igmp6_group_added+0x150/0x150 [ipv6] [ 10.156026] [<8044b3fa>] run_timer_softirq+0x16a/0x240 [ 10.156026] [<a0579320>] ? igmp6_group_added+0x150/0x150 [ipv6] [ 10.156026] [<80444984>] __do_softirq+0xd4/0x2f0 [ 10.156026] [<804448b0>] ? tasklet_action+0x100/0x100 [ 10.156026] [<80404036>] do_softirq_own_stack+0x26/0x30 [ 10.156026] <IRQ> [<80444d05>] irq_exit+0x65/0x70 [ 10.156026] [<8042d758>] smp_apic_timer_interrupt+0x38/0x50 [ 10.156026] [<809ee91f>] apic_timer_interrupt+0x2f/0x34 [ 10.156026] [<8048007b>] ? mark_lock+0x17b/0x5f0 [ 10.156026] [<8040a912>] ? default_idle+0x22/0xf0 [ 10.156026] [<8040b13e>] arch_cpu_idle+0xe/0x10 [ 10.156026] [<8047bfc6>] cpu_startup_entry+0x206/0x410 [ 10.156026] [<8042bfbd>] start_secondary+0x19d/0x1e0 Acked-by: Tony Lindgren <tony@atomide.com> Reported-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jeff Westfahl <jeff.westfahl@ni.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <linux-usb@vger.kernel.org> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-19usb: gadget: Fix return value check in r8a66597_probe()Wei Yongjun
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-19usb: gadget: Fix return value check in ep_write()Wei Yongjun
In case of error, the function memdup_user() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-19usb: atmel_usba_udc: fix it to deal with final dma channelBo Shen
As, the interrupt for DMA is counted from 1, so need to checked the USBA_NR_DMAS, in old way, it only check (USBA_NR_DMAS - 1), so fix it. Reported-by: Max Liao <liaops@embest-tech.com> Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-19usb: gadget: fix error return codeJulia Lawall
Convert a zero return value on error to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-19usb: dbgp gadget: fix use after free in dbgp_unbind()Alexey Khoroshilov
After dbgp_bind()-dbgp_unbind() cycle happens, static variable dbgp contains pointers to already deallocated memory (dbgp.serial and dbgp.req). If the next dbgp_bind() fails, for example in usb_ep_alloc_request(), dbgp_bind() calls dbgp_unbind() on failure path, and dbgp_unbind() frees dbgp.serial that still stores a pointer to already deallocated memory. The patch sets pointers to NULL in dbgp_unbind(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Steady transitioning of the BPF instructure to a generic spot so all kernel subsystems can make use of it, from Alexei Starovoitov. 2) SFC driver supports busy polling, from Alexandre Rames. 3) Take advantage of hash table in UDP multicast delivery, from David Held. 4) Lighten locking, in particular by getting rid of the LRU lists, in inet frag handling. From Florian Westphal. 5) Add support for various RFC6458 control messages in SCTP, from Geir Ola Vaagland. 6) Allow to filter bridge forwarding database dumps by device, from Jamal Hadi Salim. 7) virtio-net also now supports busy polling, from Jason Wang. 8) Some low level optimization tweaks in pktgen from Jesper Dangaard Brouer. 9) Add support for ipv6 address generation modes, so that userland can have some input into the process. From Jiri Pirko. 10) Consolidate common TCP connection request code in ipv4 and ipv6, from Octavian Purdila. 11) New ARP packet logger in netfilter, from Pablo Neira Ayuso. 12) Generic resizable RCU hash table, with intial users in netlink and nftables. From Thomas Graf. 13) Maintain a name assignment type so that userspace can see where a network device name came from (enumerated by kernel, assigned explicitly by userspace, etc.) From Tom Gundersen. 14) Automatic flow label generation on transmit in ipv6, from Tom Herbert. 15) New packet timestamping facilities from Willem de Bruijn, meant to assist in measuring latencies going into/out-of the packet scheduler, latency from TCP data transmission to ACK, etc" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits) cxgb4 : Disable recursive mailbox commands when enabling vi net: reduce USB network driver config options. tg3: Modify tg3_tso_bug() to handle multiple TX rings amd-xgbe: Perform phy connect/disconnect at dev open/stop amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask net: sun4i-emac: fix memory leak on bad packet sctp: fix possible seqlock seadlock in sctp_packet_transmit() Revert "net: phy: Set the driver when registering an MDIO bus device" cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine team: Simplify return path of team_newlink bridge: Update outdated comment on promiscuous mode net-timestamp: ACK timestamp for bytestreams net-timestamp: TCP timestamping net-timestamp: SCHED timestamp on entering packet scheduler net-timestamp: add key to disambiguate concurrent datagrams net-timestamp: move timestamp flags out of sk_flags net-timestamp: extend SCM_TIMESTAMPING ancillary data struct cxgb4i : Move stray CPL definitions to cxgb4 driver tcp: reduce spurious retransmits due to transient SACK reneging qlcnic: Initialize dcbnl_ops before register_netdev ...
2014-07-21Merge tag 'usb-for-v3.17' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.17 merge window Surprisingly enough, while a big set of patches, the majority is composed of cleanups (using devm_*, fixing sparse errors, moving code around, adding const, etc). The highlights are addition of new support for PLX USB338x devices, and support for USB 2.0-only configurations of the DWC3 IP core. Signed-of-by: Felipe Balbi <balbi@ti.com>
2014-07-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16usb: gadget: f_rndis: fix interface id for OS descriptorsAndrzej Pietrasiewicz
f->os_desc_table[0].if_id is zero by default. If the actual id happens to be different then no Feature Descriptors will be returned to the host for this interface, so assign if_id as soon as it is known. Cc: <stable@vger.kernel.org> # v3.16 Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit (git 2.34.1) at 2025-09-23 19:53:09 +0000