summaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)Author
2015-10-16usb/host/fotg210: Fix coding style issuesPeter Senna Tschudin
This patch fix coding style issues reported by checkpatch that do not change semantics of the code. Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-16usb-host: Remove fusbh200 driverPeter Senna Tschudin
fusbh200 and fotg210 are very similar. The initial idea was to consolidate both drivers but I'm afraid fusbh200 is not being used. This patch remove the fusbh200 source code, update Kconfig and two Makefiles. Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: John Chiang <john453@faraday-tech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-16usb: xhci: configure 32-bit DMA if the controller does not support 64-bit DMADuc Dang
This change avoids DMA error in the cases where dma_mask and coherent_dma_mask of a 32-bit controller get configured as DMA_BIT_MASK(64) when running on a 64-bit system. Signed-off-by: Duc Dang <dhdang@apm.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-16usb: Add support for ACPI identification to xhci-platformDuc Dang
Provide the methods to let ACPI identify the need to use xhci-platform. Change the Kconfig files so the xhci-plat.o file is selectable during kernel config. This has been tested on an ARM64 machine with platform XHCI, an x86_64 machine with XHCI, and an x86_64 machine without XHCI. There were no regressions or error messages on the machines without platform XHCI. [dhdang: regenerate the patch over v4.3-rc1 and address new comments] Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com> Signed-off-by: Duc Dang <dhdang@apm.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-16usb: make xhci platform driver use 64 bit or 32 bit DMADuc Dang
The xhci platform driver needs to work on systems that either only support 64-bit DMA or only support 32-bit DMA. Attempt to set a coherent dma mask for 64-bit DMA, and attempt again with 32-bit DMA if that fails. [dhdang: regenerate the patch over v4.3-rc1 and address new comments] Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com> Tested-by: Mark Salter <msalter@redhat.com> Signed-off-by: Duc Dang <dhdang@apm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-16usb: xhci: Makefile: move xhci-pci and xhci-plat-hcd after xhci-hcdLu, Baolu
Module xhci-pci and xhci-plat-hcd depend on xhci-hcd. Module xhci-hcd should be put at a place before xhci-pci and xhci-plat-hcd. Otherwise, xhci_hcd_init() might be executed after other functions in xhci-hcd if they are all selected to be built in. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-16xhci: replace custom implementation of readq / writeqAndy Shevchenko
The readq() and writeq() helpers are available in the asm-generic/io-64-nonatomic-hi-lo.h and asm-generic/io-64-nonatomic-lo-hi.h headers. Replace custom implementation by the generic helpers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-16xhci: create one unified function to calculate TRB TD remainder.Mathias Nyman
xhci versions 1.0 and later report the untransferred data remaining in a TD a bit differently than older hosts. We used to have separate functions for these, and needed to check host version before calling the right function. Now Mediatek host has an additional quirk on how it uses the TD Size field for remaining data. To prevent yet another function for calculating remainder we instead want to make one quirk friendly unified function. Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05USB: u132-hcd: Fix seperate word in printk messageMasanari Iida
This patch fix seperated word in printk message. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: host: ehci-msm: fix handling platform_get_irq resultAndrzej Hajda
The function can return negative values. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: host: fotg210: remove unreachable codeLuis de Bethencourt
Before running the platform_driver_unregister() the code will either return retval or jump to clean. Removing this line that is unreachable. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: host: uhci-platform: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: host: ohci-spear: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: host: fsl-mph-dr-of: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: host: ehci-spear: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04USB: ehci-platform: Add ACPI bindings for the EHCI platform driver.Jeremy Linton
This enables USB on the ARM juno board when booted with an ACPI kernel. The PNP id comes from the PNP/ACPI registry and describes an EHCI controller without debug. Tested-by: Huang Shijie <shijie.huang@arm.com> Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04USB: ehci-platform: Display a DMA configuration error messageJeremy Linton
If the ehci driver fails to configure the dma settings then display a dev error instead of simply failing. This is triggered in an ACPI world if the user fails to set the _CCA on the device. Tested-by: Huang Shijie <shijie.huang@arm.com> Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: ehci-orion: fix probe for !GENERIC_PHYJonas Gorski
Commit d445913ce0ab7f ("usb: ehci-orion: add optional PHY support") added support for optional phys, but devm_phy_optional_get returns -ENOSYS if GENERIC_PHY is not enabled. This causes probe failures, even when there are no phys specified: [ 1.443365] orion-ehci f1058000.usb: init f1058000.usb fail, -38 [ 1.449403] orion-ehci: probe of f1058000.usb failed with error -38 Similar to dwc3, treat -ENOSYS as no phy. Fixes: d445913ce0ab7f ("usb: ehci-orion: add optional PHY support") Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04xhci: drop null test before destroy functionsJulia Lawall
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04whci: drop null test before destroy functionsJulia Lawall
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: host: drop null test before destroy functionsJulia Lawall
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); @@ expression x; @@ -if (x != NULL) { \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); x = NULL; -} // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04xhci: support new USB 3.1 hub request to get extended port statusMathias Nyman
USB 3.1 adds different types of Get Port Status request. The Get Extended Port Status request returns 4 additional bytes after the normal portstatus and portchange words containing link speed and lane information about a connected enhanced super speed device Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04xhci: check xhci hardware for USB 3.1 supportMathias Nyman
Set the controller speed to HCD_USB31 to if host hardware supports USB 3.1 For PCI xhci controllers the USB 3.1 support is checked from SBRN bits in pci config space. Platform controllers will need to set xhci->sbrn == 0x31 to indicate USB 3.1 support before calling xhci_gen_setup(). Also make sure xhci driver works correctly with speed set to HCD_USB31 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04xhci: define the new default speed ID for SuperSpeedPlus used by xhci hwMathias Nyman
USB 3.1 capable xhci controllers use a new default speed ID "5" in the PORTSC register to represent a 10Gbps connection speed of a SuperSpeedPlus device Make sure the xhci driver can handle the returned SuperSpeedPlus speed ID properly Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04xhci: Add a SuperSpeedPlus capability descriptor for xhci USB 3.1 roothubMathias Nyman
All usb devices that support USB 3.1 Gen2 speeds need to provide a SuperSpeedPlus device capability descriptor as part of their BOS descriptor. If the xhci controller supports USB 3.1 enhanced SuperSpeed, meaning it can handle both Gen1 SuperSpeed 5Gbps and Gen2 SuperSpeedPlus 10Gbps devices, then we need to provide a SuperSpeedPlus capability descriptor for the USB 3.1 roothub as well. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04xhci: parse xhci protocol speed ID list for usb 3.1 usageMathias Nyman
xhci 1.1 controllers that support USB 3.1 must provide a protocol speed ID (PSI) list to inform the driver of the supported speeds. The PSI list can be read from the xhci supported protocol extended capabilities. The PSI values will be used to create a USB 3.1 SuperSpeedPlus capability descriptor for the xhci USB 3.1 roothub. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04xhci: Read and parse new xhci 1.1 capability registerLu Baolu
xhci 1.1 capable controllers have a new HCCPARAMS2 registers with bits indicating support for new xhci 1.1 capabilities. Also add support for the new xhci 1.1 bits in the config operational opertational register that used to be reserved Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> [modified and left out parts not related to HCCPARAMS2 -Mathias] Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21xhci: init command timeout timer earlier to avoid deleting it uninitializedMathias Nyman
Don't check if timer is running with a timer_pending() before deleting it with del_timer_sync(), this defies the whole point of the sync part and can cause a possible race. Instead we just want to make sure the timer is initialized early enough before we have a chance to delete it. Cc: <stable@vger.kernel.org> Reported-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21xhci: change xhci 1.0 only restrictions to support xhci 1.1Mathias Nyman
Some changes between xhci 0.96 and xhci 1.0 specifications forced us to check the hci version in code, some of these checks were implemented as hci_version == 1.0, which will not work with new xhci 1.1 controllers. xhci 1.1 behaves similar to xhci 1.0 in these cases, so change these checks to hci_version >= 1.0 Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21usb: xhci: exit early in xhci_setup_device() if we're halted or dyingRoger Quadros
During quick plug/removal of OTG adapter during dual-role testing it can happen that xhci_alloc_device() is called for the newly detected device after the DRD library has called xhci_stop to remove the HCD. If that is the case, just fail early to prevent the following warning. [ 154.732649] hub 4-0:1.0: USB hub found [ 154.742204] hub 4-0:1.0: 1 port detected [ 154.824458] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000 [ 154.854609] hub 4-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 154.944430] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 154.951009] xhci-hcd xhci-hcd.0.auto: xhci_setup_device [ 155.038191] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 155.043315] usb usb4: USB disconnect, device number 1 [ 155.055270] xhci-hcd xhci-hcd.0.auto: xhci_stop [ 155.060094] xhci-hcd xhci-hcd.0.auto: USB bus 4 deregistered [ 155.066576] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 155.071710] usb usb3: USB disconnect, device number 1 [ 155.077124] xhci-hcd xhci-hcd.0.auto: xhci_setup_device [ 155.082389] ------------[ cut here ]------------ [ 155.087690] WARNING: CPU: 0 PID: 72 at drivers/usb/host/xhci.c:3800 xhci_setup_device+0x410/0x484 [xhci_hcd]() [ 155.097861] Modules linked in: sd_mod usb_storage scsi_mod usb_f_ss_lb g_zero libcomposite ipv6 xhci_plat_hcd xhci_hcd usbcore dwc3 udc_core evdev ti_am335x_adc joydev kfifo_buf industrialio snd_soc_simple_cc [ 155.146734] CPU: 0 PID: 72 Comm: kworker/0:3 Tainted: G W 4.1.4-00834-gcd9380b-dirty #50 [ 155.156073] Hardware name: Generic AM43 (Flattened Device Tree) [ 155.162117] Workqueue: usb_hub_wq hub_event [usbcore] [ 155.167249] Backtrace: [ 155.169751] [<c0012af0>] (dump_backtrace) from [<c0012c8c>] (show_stack+0x18/0x1c) [ 155.177390] r6:c089d4a4 r5:ffffffff r4:00000000 r3:ee46c000 [ 155.183137] [<c0012c74>] (show_stack) from [<c05f7c14>] (dump_stack+0x84/0xd0) [ 155.190446] [<c05f7b90>] (dump_stack) from [<c00439ac>] (warn_slowpath_common+0x80/0xbc) [ 155.198605] r7:00000009 r6:00000ed8 r5:bf27eb70 r4:00000000 [ 155.204348] [<c004392c>] (warn_slowpath_common) from [<c0043a0c>] (warn_slowpath_null+0x24/0x2c) [ 155.213202] r8:ee49f000 r7:ee7c0004 r6:00000000 r5:ee7c0158 r4:ee7c0000 [ 155.220051] [<c00439e8>] (warn_slowpath_null) from [<bf27eb70>] (xhci_setup_device+0x410/0x484 [xhci_hcd]) [ 155.229816] [<bf27e760>] (xhci_setup_device [xhci_hcd]) from [<bf27ec10>] (xhci_address_device+0x14/0x18 [xhci_hcd]) [ 155.240415] r10:ee598200 r9:00000001 r8:00000002 r7:00000001 r6:00000003 r5:00000002 [ 155.248363] r4:ee49f000 [ 155.250978] [<bf27ebfc>] (xhci_address_device [xhci_hcd]) from [<bf20cb94>] (hub_port_init+0x1b8/0xa9c [usbcore]) [ 155.261403] [<bf20c9dc>] (hub_port_init [usbcore]) from [<bf2101e0>] (hub_event+0x738/0x1020 [usbcore]) [ 155.270874] r10:ee598200 r9:ee7c0000 r8:ee7c0038 r7:ee518800 r6:ee49f000 r5:00000001 [ 155.278822] r4:00000000 [ 155.281426] [<bf20faa8>] (hub_event [usbcore]) from [<c005754c>] (process_one_work+0x128/0x340) [ 155.290196] r10:00000000 r9:00000003 r8:00000000 r7:fedfa000 r6:eeec5400 r5:ee598314 [ 155.298151] r4:ee434380 [ 155.300718] [<c0057424>] (process_one_work) from [<c00578f8>] (worker_thread+0x158/0x49c) [ 155.308963] r10:ee434380 r9:00000003 r8:eeec5400 r7:00000008 r6:ee434398 r5:eeec5400 [ 155.316913] r4:eeec5414 [ 155.319482] [<c00577a0>] (worker_thread) from [<c005cc40>] (kthread+0xdc/0xf8) [ 155.326765] r10:00000000 r9:00000000 r8:00000000 r7:c00577a0 r6:ee434380 r5:ee4441c0 [ 155.334713] r4:00000000 r3:00000000 [ 155.338341] [<c005cb64>] (kthread) from [<c000fc08>] (ret_from_fork+0x14/0x2c) [ 155.345626] r7:00000000 r6:00000000 r5:c005cb64 r4:ee4441c0 [ 155.356108] ---[ end trace a58d34c223b190e6 ]--- [ 155.360783] xhci-hcd xhci-hcd.0.auto: Virt dev invalid for slot_id 0x1! [ 155.574404] xhci-hcd xhci-hcd.0.auto: xhci_setup_device [ 155.579667] ------------[ cut here ]------------ Cc: <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21usb: xhci: stop everything on the first call to xhci_stopRoger Quadros
xhci_stop will be called twice, once for the shared hcd and again for the primary hcd. We stop the XHCI controller in any case so clean up everything on the first call else we can timeout waiting for pending requests to complete. Cc: <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21usb: xhci: Clear XHCI_STATE_DYING on startRoger Quadros
For whatever reason if XHCI died in the previous instant then it will never recover on the next xhci_start unless we clear the DYING flag. Cc: <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21usb: xhci: lock mutex on xhci_stopRoger Quadros
Else it races with xhci_setup_device Cc: <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21xhci: Move xhci_pme_quirk() behind #ifdef CONFIG_PMTomer Barletz
xhci_pme_quirk() is only used when CONFIG_PM is defined. Compiling a kernel without PM complains about this function [reworded commit message -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: Tomer Barletz <barletz@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21xhci: give command abortion one more chance before killing xhciMathias Nyman
We want to give the command abortion an additional try to stop the command ring before we completely hose xhci. Cc: <stable@vger.kernel.org> Tested-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18usb: host: ehci-sys: delete useless bus_to_hcd conversionPeter Chen
The ehci platform device's drvdata is the pointer of struct usb_hcd already, so we doesn't need to call bus_to_hcd conversion again. Cc: <stable@vger.kernel.org> Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14USB: host: ohci-at91: merge loops in ohci_hcd_at91_drv_probeAlexandre Belloni
ohci_hcd_at91_drv_probe() has four at91_for_each_port. They can be merged into two loops without changing the driver behaviour. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14USB: host: ohci-at91: merge ohci_at91_of_init in ohci_hcd_at91_drv_probeAlexandre Belloni
As device tree support is now mandatory, merge ohci_at91_of_init() in ohci_hcd_at91_drv_probe(). Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14USB: host: ohci-at91: depend on OFAlexandre Belloni
Make the driver depend on CONFIG_OF and remove the now useless #ifdef Also, fix the Kconfig indentation. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14USB: host: ohci-at91: move at91_usbh_data definition in c fileAlexandre Belloni
Move struct at91_usbh_data back in ohci-at91.c as this is the only user left after switching all at91 platforms to DT only. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14drivers: usb: fsl: Workaround for USB erratum-A005275Nikhil Badola
Incoming packets in high speed are randomly corrupted by h/w resulting in multiple errors. This workaround makes FS as default mode in all affected socs by disabling HS chirp signalling.This errata does not affect FS and LS mode. Forces all HS devices to connect in FS mode for all socs affected by this erratum: P3041 and P2041 rev 1.0 and 1.1 P5020 and P5010 rev 1.0 and 2.0 P5040, P1010 and T4240 rev 1.0 Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-10Merge 4.2-rc6 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-08xhci: xHCI 1.1: Stopped - Short Packet Capability (SPC)Lu Baolu
This patch enables xhci driver to support SPC by handling Stopped - Short Packet event in transfer event path. If SPC = '1' and the stop endpoint command is executed, after a Short Packet condition has been detected, but before the end of the TD has been reached, (i.e. the TD is in progress for pipe), then a Transfer Event TRB with its Completion Code set to Stopped - Short Packet and its TRB Transfer Length set to value of the EDTLA shall be forced for the interrupted TRB, irrespective of whether its IOC or ISP flags are set. This Transfer Event TRB will precede the Command Completion Event TRB for the command, and is referred to as a Stopped Transfer Event. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-08xhci: xHCI 1.1: Contiguous Frame ID Capability (CFC)Lu Baolu
If the Contiguous Frame ID Capability is supported (CFC = 1), then the xHC shall match the Frame ID in every Isoch TD with SIA = 0 against the Frame Index of the MFINDEX register. This rule ensures resynchronization of Isoch TDs even if some are dropped due to Missed Service Errors or Stopping the endpoint. This patch enables xHCI driver to support CFC by calculating and setting the Frame ID field of an Isoch TRB. [made some dbg messages checkpatch friendly -Mathias] Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-08usb: xhci: Add support for URB_ZERO_PACKET to bulk/sg transfersReyad Attiyat
This commit checks for the URB_ZERO_PACKET flag and creates an extra zero-length td if the urb transfer length is a multiple of the endpoint's max packet length. Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-08usb: xhci: make USB_XHCI_PLATFORM selectableRafał Miłecki
Right now xhci-plat-hcd can be built when using one of platform specific drivers only (mvebu/rcar). There shouldn't be such limitation as some platforms may not require any quirks and may want to just use a generic driver ("generic-xhci" / "xhci-hcd"). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05usb: host: xhci: Simplify return statementSaurabh Karajgaonkar
Replace redundant variable use in return statement. Signed-off-by: Saurabh Karajgaonkar <skarajga@visteon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05usb: host: u132-hcd: Simplify return statementSaurabh Karajgaonkar
Replace redundant variable use in return statement. Signed-off-by: Saurabh Karajgaonkar <skarajga@visteon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05usb: host: oxu210hp-hcd: Simplify return statementSaurabh Karajgaonkar
Replace redundant variable use in return statement. Signed-off-by: Saurabh Karajgaonkar <skarajga@visteon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05usb: host: ehci-st: Simplify return statementSaurabh Karajgaonkar
Replace redundant variable use in return statement. Signed-off-by: Saurabh Karajgaonkar <skarajga@visteon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-12 04:18:45 +0000