summaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)Author
2023-02-02xhci: Refactor interrupter code for initial multi interrupter support.Mathias Nyman
xHC supports several interrupters, each with its own mmio register set, event ring and MSI/MSI-X vector. Transfers can be assigned different interrupters when queued. See xhci 4.17 for details. Current driver only supports one interrupter. Create a xhci_interrupter structure containing an event ring, pointer to mmio registers for this interrupter, variables to store registers over s3 suspend, erst, etc. Add functions to create and free an interrupter, and pass an interrupter pointer to functions that deal with events. Secondary interrupters are also useful without having an interrupt vector. One use case is the xHCI audio sideband offloading where a DSP can take care of specific audio endpoints. When all transfer events of an offloaded endpoint can be mapped to a separate interrupter event ring the DSP can poll this ring, and we can mask these events preventing waking up the CPU. Only minor functional changes such as clearing some of the interrupter registers when freeing the interrupter. Still create only one primary interrupter. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230202150505.618915-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-02xhci: remove xhci_test_trb_in_td_math early development checkMathias Nyman
Time to remove this test trb in td math check that was added in early stage of xhci driver development. It verified that the size, alignment and boundaries of the event and command rings allocated by the driver itself are correct. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230202150505.618915-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-02xhci: fix event ring segment table related masks and variables in headerMathias Nyman
xHC controller can supports up to 1024 interrupters. To fit these change the max_interrupters varable from u8 to u16. Add a separate mask for the reserve and preserve bits [5:0] in the erst base register and use it instead of the ERST_PRT_MASK. ERSR_PTR_MASK [3:0] is intended for masking bits in the event ring dequeue pointer register. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230202150505.618915-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-02xhci: split out rcar/rz support from xhci-plat.cArnd Bergmann
The USB_XHCI_RZV2M and USB_RENESAS_USB3 select other drivers based on the enabled SoC types, which leads to build failures when the dependencies are not met: WARNING: unmet direct dependencies detected for USB_RZV2M_USB3DRD Depends on [n]: USB_SUPPORT [=y] && USB_GADGET [=n] && (ARCH_R9A09G011 [=n] || COMPILE_TEST [=y]) Selected by [m]: - USB_XHCI_RZV2M [=m] && USB_SUPPORT [=y] && USB [=y] && USB_XHCI_HCD [=m] && USB_XHCI_PLATFORM [=m] && (ARCH_R9A09G011 [=n] || COMPILE_TEST [=y]) ERROR: modpost: "rzv2m_usb3drd_reset" [drivers/usb/host/xhci-plat-hcd.ko] undefined! The xhci-rcar driver has a reverse dependency with the xhci core, and it depends on the UDC driver in turn. To untangle this, make the xhci-rcar.ko driver a standalone module that just calls into the xhci-plat.ko module like other drivers do. This allows handling the dependency on the USB_RZV2M_USB3DRD driver to only affect the xhci-rcar module and simplify the xhci-plat module. It also allows leaving out the hacks for broken dma mask and nested devices from the rcar side and keep that only in the generic xhci driver. As a future cleanup, the marvell and dwc3 specific bits of xhci-plat.c could be moved out as well, but that is not required for this bugfix. Fixes: c52c9acc415e ("xhci: host: Add Renesas RZ/V2M SoC support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230131150531.12347-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-01usb: ohci-omap: avoid unused-variable warningArnd Bergmann
The dead code removal has led to 'need_transceiver' not being used at all when OTG support is disabled: drivers/usb/host/ohci-omap.c: In function 'ohci_omap_reset': drivers/usb/host/ohci-omap.c:99:33: error: unused variable 'need_transceiver' [-Werror=unused-variable] 99 | int need_transceiver = (config->otg != 0); Change the #ifdef check into an IS_ENABLED() check to make the code more readable and let the compiler see where it is used. Fixes: 8825acd7cc8a ("ARM: omap1: remove dead code") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-01usb: remove ohci-tmio driverArnd Bergmann
The TMIO MFD driver is getting removed, so its OHCI portion is not used any more either. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-31USB: MAX3421: Handle USB NAK correctlyMark Tomlinson
A USB peripheral can respond with a NAK if it is not yet ready to send/receive data. In this case, the transaction should be retried. The MAX3421 driver did do this, and switched to a different type of retry after a number of 'fast' retries. On at least some USB flash devices, this second type of retry never succeeds. This patch changes the behaviour so that 'fast' retries continue. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20230127024734.8777-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-25xhci: host: Add Renesas RZ/V2M SoC supportBiju Das
RZ/V2M is similar to R-Car XHCI but it doesn't require any firmware, we need to reset the USB Host reset release in DRD Module before accessing host registers. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230121145853.4792-10-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-25usb: host: xhci-plat: Add reset supportBiju Das
Add optional reset support. This is in preparation to adding USB xHCI support for RZ/V2M SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230121145853.4792-9-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-25usb: host: xhci-plat: Improve clock handling in probe()Biju Das
It is always better to acquire all the clock resources first and then do the clock operations. This patch acquires all the optional clocks first and then calls corresponding prepare_enable(). There is no functional change. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230121145853.4792-8-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24usb: host: ehci-fsl: Use DRV_NAMEAlexander Stein
"fsl-ehci" is used for both MODULE_ALIAS and driver name. As they have to match use DRV_NAME in both locations. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230123100007.1479090-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-23Merge 6.2-rc5 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here and this resolves merge conflicts as reported in linux-next in the following files: drivers/usb/host/xhci.c drivers/usb/host/xhci.h drivers/usb/typec/ucsi/ucsi.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-21Merge tag 'usb-6.2-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt fixes from Greg KH: "Here are a number of small USB and Thunderbolt driver fixes and new device id changes for 6.2-rc5. Included in here are: - thunderbolt bugfixes for reported problems - new usb-serial driver ids added - onboard_hub usb driver fixes for much-reported problems - xhci bugfixes - typec bugfixes - ehci-fsl driver module alias fix - iowarrior header size fix - usb gadget driver fixes All of these, except for the iowarrior fix, have been in linux-next with no reported issues. The iowarrior fix passed the 0-day testing and is a one digit change based on a reported problem in the driver (which was written to a spec, not the real device that is now available)" * tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits) USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100 usb: host: ehci-fsl: Fix module alias usb: dwc3: fix extcon dependency usb: core: hub: disable autosuspend for TI TUSB8041 USB: fix misleading usb_set_intfdata() kernel doc usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate() USB: gadget: Add ID numbers to configfs-gadget driver names usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail usb: gadget: g_webcam: Send color matching descriptor per frame usb: typec: altmodes/displayport: Use proper macro for pin assignment check usb: typec: altmodes/displayport: Fix pin assignment calculation usb: typec: altmodes/displayport: Add pin assignment helper usb: gadget: f_fs: Ensure ep0req is dequeued before free_request usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait usb: misc: onboard_hub: Move 'attach' work to the driver usb: misc: onboard_hub: Invert driver registration order usb: ucsi: Ensure connector delayed work items are flushed usb: musb: fix error return code in omap2430_probe() usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch) xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables ...
2023-01-20usb: host: ehci-fsl: Fix module aliasAlexander Stein
Commit ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module") changed DRV_NAME which was used for MODULE_ALIAS as well. Starting from this the module alias didn't match the platform device name created in fsl-mph-dr-of.c Change DRV_NAME to match the driver name for host mode in fsl-mph-dr-of. This is needed for module autoloading on ls1021a. Fixes: ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module") Cc: stable <stable@kernel.org> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230120122714.3848784-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20ARM: pxa: remove unused pxa3xx-ulpiArnd Bergmann
This was only used by the cm-x300 board, which is now gone. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-17xhci: tegra: USB2 pad power controlsPetlozu Pravareshwar
Program USB2 pad PD controls during port connect/disconnect, port suspend/resume, and test mode, to reduce power consumption on disconnect or suspend. Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com> Co-developed-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Jim Lin <jilin@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221111101813.32482-4-jilin@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: hub: export symbol on xhci_hub_controlJim Lin
XHCI host drivers may override the default xhci_hub_control() with their own device specific function. To allow these host drivers to call the xhci_hub_control() function from within their own hub_control() callback and be built as a module, export the symbol for xhci_hub_control. Signed-off-by: Jim Lin <jilin@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221111101813.32482-3-jilin@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Add hub_control to xhci_driver_overridesJim Lin
Add a hub_control() callback to the xhci_driver_overrides structure to allow host drivers to override the default hub_control function. This is required for Tegra which requires device specific actions for power management to be executed during USB state transitions. Signed-off-by: Jim Lin <jilin@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221111101813.32482-2-jilin@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: host: xhci-tegra: Add Tegra234 XHCI supportSing-Han Chen
This change adds Tegra234 XUSB host mode controller support. In Tegra234, some of the registers have moved to bar2 space. The new soc variable has_bar2 indicates the chip with bar2 area. This patch adds new reg helper to let the driver reuse the same code for those chips with bar2 support. Signed-off-by: Sing-Han Chen <singhanc@nvidia.com> Co-developed-by: Wayne Chang <waynec@nvidia.com> Signed-off-by: Wayne Chang <waynec@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20230111110450.24617-7-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tablesMathias Nyman
USB3 ports on xHC hosts may have retimers that cause too long exit latency to work with native USB3 U1/U2 link power management states. For now only use usb_acpi_port_lpm_incapable() to evaluate if port lpm should be disabled while setting up the USB3 roothub. Other ways to identify lpm incapable ports can be added here later if ACPI _DSM does not exist. Limit this to Intel hosts for now, this is to my knowledge only an Intel issue. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Add a flag to disable USB3 lpm on a xhci root port level.Mathias Nyman
One USB3 roothub port may support link power management, while another root port on the same xHC can't due to different retimers used for the ports. This is the case with Intel Alder Lake, and possible future platforms where retimers used for USB4 ports cause too long exit latecy to enable native USB3 lpm U1 and U2 states. Add a flag in the xhci port structure to indicate if the port is lpm_incapable, and check it while calculating exit latency. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Add update_hub_device override for PCI xHCI hostsMathias Nyman
Allow PCI hosts to check and tune roothub and port settings before the hub is up and running. This override is needed to turn off U1 and U2 LPM for some ports based on per port ACPI _DSM, _UPC, or possibly vendor specific mmio values for Intel xHC hosts. Usb core calls the host update_hub_device once it creates a hub. Entering U1 or U2 link power save state on ports with this limitation will cause link to fail, turning the usb device unusable in that setup. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Fix null pointer dereference when host diesMathias Nyman
Make sure xhci_free_dev() and xhci_kill_endpoint_urbs() do not race and cause null pointer dereference when host suddenly dies. Usb core may call xhci_free_dev() which frees the xhci->devs[slot_id] virt device at the same time that xhci_kill_endpoint_urbs() tries to loop through all the device's endpoints, checking if there are any cancelled urbs left to give back. hold the xhci spinlock while freeing the virt device Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: xhci: Check endpoint is valid before dereferencing itJimmy Hu
When the host controller is not responding, all URBs queued to all endpoints need to be killed. This can cause a kernel panic if we dereference an invalid endpoint. Fix this by using xhci_get_virt_ep() helper to find the endpoint and checking if the endpoint is valid before dereferencing it. [233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead [233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8 [233311.853964] pc : xhci_hc_died+0x10c/0x270 [233311.853971] lr : xhci_hc_died+0x1ac/0x270 [233311.854077] Call trace: [233311.854085] xhci_hc_died+0x10c/0x270 [233311.854093] xhci_stop_endpoint_command_watchdog+0x100/0x1a4 [233311.854105] call_timer_fn+0x50/0x2d4 [233311.854112] expire_timers+0xac/0x2e4 [233311.854118] run_timer_softirq+0x300/0xabc [233311.854127] __do_softirq+0x148/0x528 [233311.854135] irq_exit+0x194/0x1a8 [233311.854143] __handle_domain_irq+0x164/0x1d0 [233311.854149] gic_handle_irq.22273+0x10c/0x188 [233311.854156] el1_irq+0xfc/0x1a8 [233311.854175] lpm_cpuidle_enter+0x25c/0x418 [msm_pm] [233311.854185] cpuidle_enter_state+0x1f0/0x764 [233311.854194] do_idle+0x594/0x6ac [233311.854201] cpu_startup_entry+0x7c/0x80 [233311.854209] secondary_start_kernel+0x170/0x198 Fixes: 50e8725e7c42 ("xhci: Refactor command watchdog and fix split string.") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Hu <hhhuuu@google.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Message-ID: <0fe978ed-8269-9774-1c40-f8a98c17e838@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci-pci: set the dma max_seg_sizeRicardo Ribalda
Allow devices to have dma operations beyond 64K, and avoid warnings such as: xhci_hcd 0000:00:14.0: mapping sg segment longer than device claims to support [len=98304] [max=65536] Cc: stable@vger.kernel.org Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-16ARM: s3c: remove s3c24xx specific hacksArnd Bergmann
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12Merge tag 'for-linus-6.2-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - two cleanup patches - a fix of a memory leak in the Xen pvfront driver - a fix of a locking issue in the Xen hypervisor console driver * tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvcalls: free active map buffer on pvcalls_front_free_map hvc/xen: lock console list traversal x86/xen: Remove the unused function p2m_index() xen: make remove callback of xen driver void returned
2023-01-12ARM: sa1100: remove unused board filesArnd Bergmann
The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and Simpad machines were all marked as unused as there are no known users left. Remove all of these, along with references to them in defconfig files and drivers. Four machines remain now: Assabet, Collie (Zaurus SL5500), iPAQ H3600 and Jornada 720, each of which had one person still using them, with Collie also being supported in Qemu. Cc: Peter Chubb <peter.chubb@unsw.edu.au> Cc: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12ARM: omap1: remove dead codeArnd Bergmann
After the removal of the unused board files, I went through the omap1 code to look for code that no longer has any callers and remove that. In particular, support for the omap7xx/omap8xx family is now completely unused, so I'm only leaving omap15xx/omap16xx/omap59xx. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: linux-omap@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12ARM: omap1: remove unused board filesArnd Bergmann
All board support that was marked as 'unused' earlier can now be removed, leaving the five machines that that still had someone using them in 2022, or that are supported in qemu. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-10ARM: cns3xxx: remove entire platformArnd Bergmann
cns3xxx was marked as unused a while ago, and gets removed entirely now. Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-06xhci: Convert to use list_count_nodes()Andy Shevchenko
The list API provides the list_count_nodes() to help with counting existing nodes in the list. Utilise it. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221130134838.23805-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-16Merge tag 'usb-6.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt driver updates from Greg KH: "Here is the large set of USB and Thunderbolt driver changes for 6.2-rc1. Overall, thanks to the removal of a driver, more lines were removed than added, a nice change. Highlights include: - removal of the sisusbvga driver that was not used by anyone anymore - minor thunderbolt driver changes and tweaks - chipidea driver updates - usual set of typec driver features and hardware support added - musb minor driver fixes - fotg210 driver fixes, bringing that hardware back from the "dead" - minor dwc3 driver updates - addition, and then removal, of a list.h helper function for many USB and other subsystem drivers, that ended up breaking the build. That will come back for 6.3-rc1, it missed this merge window. - usual xhci updates and enhancements - usb-serial driver updates and support for new devices - other minor USB driver updates All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (153 commits) usb: gadget: uvc: Rename bmInterfaceFlags -> bmInterlaceFlags usb: dwc2: power on/off phy for peripheral mode in dual-role mode usb: dwc2: disable lpm feature on Rockchip SoCs dt-bindings: usb: mtk-xhci: add support for mt7986 usb: dwc3: core: defer probe on ulpi_read_id timeout usb: ulpi: defer ulpi_register on ulpi_read_id timeout usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller dt-bindings: vendor-prefixes: add Genesys Logic usb: fotg210-udc: fix potential memory leak in fotg210_udc_probe() usb: typec: tipd: Set mode of operation for USB Type-C connector usb: gadget: udc: drop obsolete dependencies on COMPILE_TEST usb: musb: remove extra check in musb_gadget_vbus_draw usb: gadget: uvc: Prevent buffer overflow in setup handler usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe() usb: storage: Add check for kcalloc USB: sisusbvga: use module_usb_driver() USB: sisusbvga: rename sisusb.c to sisusbvga.c USB: sisusbvga: remove console support ...
2022-12-15xen: make remove callback of xen driver void returnedDawei Li
Since commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. This change is for xen bus based drivers. Acked-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dawei Li <set_pte_at@outlook.com> Link: https://lore.kernel.org/r/TYCP286MB23238119AB4DF190997075C9CAE39@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Juergen Gross <jgross@suse.com>
2022-12-12Merge tag 'soc-drivers-6.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are few major updates in the SoC specific drivers, mainly the usual reworks and support for variants of the existing SoC. While this remains Arm centric for the most part, the branch now also contains updates to risc-v and loongarch specific code in drivers/soc/. Notable changes include: - Support for the newly added Qualcomm Snapdragon variants (MSM8956, MSM8976, SM6115, SM4250, SM8150, SA8155 and SM8550) in the soc ID, rpmh, rpm, spm and powerdomain drivers. - Documentation for the somewhat controversial qcom,board-id properties that are required for booting a number of machines - A new SoC identification driver for the loongson-2 (loongarch) platform - memory controller updates for stm32, tegra, and renesas. - a new DT binding to better describe LPDDR2/3/4/5 chips in the memory controller subsystem - Updates for Tegra specific drivers across multiple subsystems, improving support for newer SoCs and better identification - Minor fixes for Broadcom, Freescale, Apple, Renesas, Sifive, TI, Mediatek and Marvell SoC drivers" * tag 'soc-drivers-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (137 commits) soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155 dt-bindings: soc: qcom: apr: document generic qcom,apr compatible soc: qcom: Select REMAP_MMIO for ICC_BWMON driver soc: qcom: Select REMAP_MMIO for LLCC driver soc: qcom: rpmpd: Add SM4250 support dt-bindings: power: rpmpd: Add SM4250 support dt-bindings: soc: qcom: aoss: Add compatible for SM8550 soc: qcom: llcc: Add configuration data for SM8550 dt-bindings: arm: msm: Add LLCC compatible for SM8550 soc: qcom: llcc: Add v4.1 HW version support soc: qcom: socinfo: Add SM8550 ID soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets soc: qcom: rpmhpd: Add SM8550 power domains dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976 ...
2022-12-05soc: fsl: qe: request pins non-exclusivelyDmitry Torokhov
Commit 84582f9ed090 ("soc: fsl: qe: Avoid using gpio_to_desc()") changed qe_pin_request() to request and hold GPIO corresponding to a given pin. Unfortunately this does not work, as fhci-hcd requests these GPIOs first, befor calling qe_pin_request() (see drivers/usb/host/fhci-hcd.c::of_fhci_probe()). To fix it change qe_pin_request() to request GPIOs non-exclusively, and free them once the code determines GPIO controller and offset for each GPIO/pin. Also reaching deep into gpiolib implementation is not the best idea. We should either export gpio_chip_hwgpio() or keep converting to the global gpio numbers space until we fix the driver to implement proper pin control. Fixes: 84582f9ed090 ("soc: fsl: qe: Avoid using gpio_to_desc()") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/Y400YXnWBdz1e/L5@google.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-30xhci: remove unused stream_id parameter from xhci_handle_halted_endpoint()Mathias Nyman
The stream_id parameter is no longer used when handling halted endpoints. Remove it Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221130091944.2171610-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30xhci: Prevent infinite loop in transaction errors recovery for streamsMathias Nyman
Make sure to also limit the amount of soft reset retries for transaction errors on streams in cases where the transaction error event doesn't point to any specific TRB. In these cases we don't know the TRB or stream ring, but we do know which endpoint had the error. To keep error counting simple and functional, move the current err_count from ring structure to endpoint structure. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221130091944.2171610-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30xhci: disable U3 suspended ports in S4 hibernate poweroff_late stageMathias Nyman
Disable U3 suspended ports in hibernate S4 poweroff_late for systems with XHCI_RESET_TO_DEFAULT quirk, if wakeup is not enabled. This reduces the number of self-powered usb devices from surviving in U3 suspended state into next reboot. Bootloader/firmware on these systems can't handle usb ports in U3, and will timeout, causing extra delay during reboot/restore from S4. Add pci_poweroff_late() callback to struct usb_hcd to get this done at the correct stage in hibernate. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221130091944.2171610-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30xhci: export two xhci_hub functions for xhci-pci module usageMathias Nyman
some Intel Alder Lake xHC hosts on ChromeOS platforms need special workarounds touching port registers at xHC pci host hibernate. Export xhci_port_state_to_neutral() and xhci_find_slot_id_by_port() so they can be called from xhci-pci.c and thus the xhci-pci module. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221130091944.2171610-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-NReka Norman
ADL-N systems have the same issue as ADL-P, where a large boot firmware delay is seen if USB ports are left in U3 at shutdown. So apply the XHCI_RESET_TO_DEFAULT quirk to ADL-N as well. This patch depends on commit 34cd2db408d5 ("xhci: Add quirk to reset host back to default state at shutdown"). The issue it fixes is a ~20s boot time delay when booting from S5. It affects ADL-N devices, and ADL-N support was added starting from v5.16. Cc: stable@vger.kernel.org Signed-off-by: Reka Norman <rekanorman@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221130091944.2171610-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30xhci: print warning when HCE was setLongfang Liu
When HCE(Host Controller Error) is set, it means that the xhci hardware controller has an error at this time, but the current xhci driver software does not log this event. By adding an HCE event detection in the xhci interrupt processing interface, a warning log is output to the system, which is convenient for system device status tracking. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221130091944.2171610-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30Revert "xhci: Convert to use list_count()"Greg Kroah-Hartman
This reverts commit b47ec9727f47d1dce4e8cbc9aef01c80b2332535 as it breaks the build. Link: https://lore.kernel.org/r/20221130131854.35b58b16@canb.auug.org.au Link: https://lore.kernel.org/r/202211301628.iwMjPVMp-lkp@intel.com Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29xhci: Convert to use list_count()Andy Shevchenko
The list API now provides the list_count() to help with counting existing nodes in the list. Utilise it. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221123144901.40493-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irqChunfeng Yun
Can not set the @shared_hcd to NULL before decrease the usage count by usb_put_hcd(), this will cause the shared hcd not released. Fixes: 04284eb74e0c ("usb: xhci-mtk: add support runtime PM") Cc: <stable@vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20221128063337.18124-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29usb: host: fix a typo in ehci.hXu Yang
Change "ehci_hq" to "ehci_qh" in this comment. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20221128081306.2772729-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-22usb: host: xhci-mtk: omit shared hcd if either root hub has no portsChunfeng Yun
There is error log when add a usb3 root hub without ports: "hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)" so omit the shared hcd if either of the root hubs has no ports, but usually there is no usb3 port. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221118110116.20165-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-21Merge 6.1-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-11usb: Check !irq instead of irq == NO_IRQChristophe Leroy
NO_IRQ is a relic from the old days. It is not used anymore in core functions. By the way, function irq_of_parse_and_map() returns value 0 on error. In some drivers, NO_IRQ is erroneously used to check the return of irq_of_parse_and_map(). It is not a real bug today because the only architectures using the drivers being fixed by this patch define NO_IRQ as 0, but there are architectures which define NO_IRQ as -1. If one day those architectures start using the non fixed drivers, there will be a problem. Long time ago Linus advocated for not using NO_IRQ, see https://lkml.org/lkml/2005/11/21/221 . He re-iterated the same view recently in https://lkml.org/lkml/2022/10/12/622 So test !irq instead of tesing irq == NO_IRQ. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/13feefdf6b240817944e6441e26a8ddc1d81ced1.1668102802.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09usb: fotg210: Collect pieces of dual mode controllerLinus Walleij
The Faraday FOTG210 is a dual-mode OTG USB controller that can act as host, peripheral or both. To be able to probe from one hardware description and to follow the pattern of other dual- mode controllers such as MUSB or MTU3 we need to collect the two, currently completely separate drivers in the same directory. After this, users need to select the main symbol USB_FOTG210 and then each respective subdriver. We pave the road to compile both drivers into the same kernel and select the one we want to use at probe() time, and possibly add OTG support in the end. This patch doesn't do much more than create the new symbol and collect the drivers in one place. We also add a comment for the section of dual-mode controllers in the Kconfig file so people can see what these selections are about. Also add myself as maintainer as there has been little response on my patches to these drivers. Cc: Fabian Vogt <fabian@ritter-vogt.de> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221023144708.3596563-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-11 14:56:27 +0000