summaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)Author
2022-06-21usb: host: ehci-platform: add TPL supportAmelie Delaunay
The Target Peripheral List (TPL) is used to identify targeted devices during Embedded Host compliance testing. The user can add "tpl-support" in the device tree to enable it. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220621152350.145745-3-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-21usb: host: ohci-platform: add TPL supportAmelie Delaunay
The Target Peripheral List (TPL) is used to identify targeted devices during Embedded Host compliance testing. The user can add "tpl-support" in the device tree to enable it. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220621152350.145745-2-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-21staging: octeon-usb: move driver out of stagingArtur Bujdoso
The Octeon usb driver has been in staging for a long time and used in Ubiquiti routers for a while now. It's been built and then tested on real hardware with several usb devices and it is proven to be stable and ready to be moved to its proper place in the kernel tree. Move it to drivers/usb/host and adjust its Makefile, Kconfig and defconfig dependencies. Many thanks to the developers who made it happen. Signed-off-by: Artur Bujdoso <artur.bujdoso@gmail.com> Link: https://lore.kernel.org/r/Yo0HBIlSXOBM+//9@crux Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-21usb: host: ehci-q: Fix ehci_submit_single_step_set_feature annotation typoHyunwoo Kim
I found the "argument" typo. It seems that "argument" is more correct than "arguement". Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Link: https://lore.kernel.org/r/20220621064242.GA698757@ubuntu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-21USB: ohci-sm501: Fix typo in commentXiang wangx
Delete the redundant word 'the'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20220620101556.2290-1-wangxiang@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-21usb: host: ohci-ppc-of: Fix refcount leak bugLiang He
In ohci_hcd_ppc_of_probe(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220617034637.4003115-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-20Merge v5.19-rc3 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10xhci: Fix null pointer dereference in resume if xhci has only one roothubMathias Nyman
In the re-init path xhci_resume() passes 'hcd->primary_hcd' to hci_init(), however this field isn't initialized by __usb_create_hcd() for a HCD without secondary controller. xhci_resume() is called once per xHC device, not per hcd, so the extra checking for primary hcd can be removed. Fixes: e0fe986972f5 ("usb: host: xhci-plat: prepare operation w/o shared hcd") Reported-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220610115338.863152-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10usb: xhci-mtk: add support optional controller resetChunfeng Yun
Add support controller reset via a reset-controller usually in infracfg, it's different with the software reset by IPPC which only used to reset MAC, and it will also reset IPPC meanwhile. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220523090449.14430-3-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10usb: xhci: tegra: Fix error checkTang Bin
In the function tegra_xusb_powerdomain_init(), dev_pm_domain_attach_by_name() may return NULL in some cases, so IS_ERR() doesn't meet the requirements. Thus fix it. Fixes: 6494a9ad86de ("usb: xhci: tegra: Add genpd support") Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20220524121404.18376-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10usb: host: ohci-at91: add support to enter suspend using SMCClément Léger
When Linux is running under OP-TEE, the SFR is set as secured and thus the AT91_OHCIICR_USB_SUSPEND register isn't accessible. Add a SMC to do the appropriate call to suspend the controller. The SMC id is fetched from the device-tree property "microchip,suspend-smc-id". if present, then the syscon regmap is not used to enter suspend and a SMC is issued. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Clément Léger <clement.leger@bootlin.com> Link: https://lore.kernel.org/r/20220607133454.727063-1-clement.leger@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10usb: ohci-nxp: Fix refcount leak in ohci_hcd_nxp_probeMiaoqian Lin
of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 73108aa90cbf ("USB: ohci-nxp: Use isp1301 driver") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220603141231.979-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10usb: host: Fix refcount leak in ehci_hcd_ppc_of_probeMiaoqian Lin
of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 796bcae7361c ("USB: powerpc: Workaround for the PPC440EPX USBH_23 errata [take 3]") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220602110849.58549-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-03Merge tag 'usb-5.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...
2022-06-02Merge tag 'arm-multiplatform-5.19-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ...
2022-05-26Merge tag 'arm-multiplatform-5.19-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARMv4T/v5 multiplatform support from Arnd Bergmann: "This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these" * tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: ixp4xx: Consolidate Kconfig fixing issue ARM: versatile: Add missing of_node_put in dcscb_init ARM: config: Refresh IXP4xx config after multiplatform ARM: omap1: add back omap_set_dma_priority() stub ARM: omap: fix missing declaration warnings ARM: omap: fix address space warnings from sparse ARM: spear: remove include/mach/ subdirectory ARM: davinci: remove include/mach/ subdirectory ARM: omap2: remove include/mach/ subdirectory integrator: remove empty ap_init_early() ARM: s3c: fix include path MAINTAINERS: omap1: Add Janusz as an additional maintainer ARM: omap1: htc_herald: fix typos in comments ARM: OMAP1: fix typos in comments ARM: OMAP1: clock: Remove noop code ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: omap1: fix build with no SoC selected ...
2022-05-19usb: Probe EHCI, OHCI controllers asynchronouslyDmitry Torokhov
initcall_debug shows that OHCI controllers take ~60ms to probe on Rockchip RK3399 systems: probe of fe3a0000.usb returned 1 after 58941 usecs A few of these can add up to waste non-trivial amounts of time at boot. These host controllers don't provide resources to other drivers, so this shouldn't contribute to exposing race conditions. Chrome OS kernels have carried this patch on some systems for a while without issues. Similar patches have been merged for a variety of (e)MMC host controllers for similar reasons. [Brian: rewrote commit message, refreshed, but retained dtor's original authorship ] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20220518150150.1.Ie8ea0e945a9c15066237014be219eed60066d493@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19xhci: Don't defer primary roothub registration if there is only one roothubMathias Nyman
The support for xHCI controllers with only one roothub, and the code to defer primary roothub registation until second roothub got merged to usb-next for 5.19 at the same time. commit 873f323618c2 ("xhci: prepare for operation w/o shared hcd") commit b7a4f9b5d0e4 ("xhci: Set HCD flag to defer primary roothub registration") These got merged in such a way that the flag to defer primary roothub registration is set even for xHC controllers with just one roothub. Fix this by setting the defer flag in a codepath taken only if we have two roothubs Fixes: 873f323618c2 ("xhci: prepare for operation w/o shared hcd") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220516094850.19788-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19xen/usbfront: use xenbus_setup_ring() and xenbus_teardown_ring()Juergen Gross
Simplify xen-hcd's ring creation and removal via xenbus_setup_ring() and xenbus_teardown_ring(). Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/usb: switch xen-hcd to use INVALID_GRANT_REFJuergen Gross
Instead of using a private macro for an invalid grant reference use the common one. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-12usb: xhci-mtk: remove bandwidth budget tableChunfeng Yun
The bandwidth budget table is introduced to trace ideal bandwidth used by each INT/ISOC endpoint, but in fact the endpoint may consume more bandwidth and cause data transfer error, so it's better to leave some margin. Obviously it's difficult to find the best margin for all cases, instead take use of the worst-case scenario. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220512064931.31670-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12usb: xhci-mtk: fix fs isoc's transfer errorChunfeng Yun
Due to the scheduler allocates the optimal bandwidth for FS ISOC endpoints, this may be not enough actually and causes data transfer error, so come up with an estimate that is no less than the worst case bandwidth used for any one mframe, but may be an over-estimate. Fixes: 451d3912586a ("usb: xhci-mtk: update fs bus bandwidth by bw_budget_table") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220512064931.31670-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12xhci: Allow host runtime PM as default for Intel Alder Lake N xHCIMathias Nyman
Alder Lake N TCSS xHCI needs to be runtime suspended whenever possible to allow the TCSS hardware block to enter D3 and thus save energy Cc: stable@kernel.org Suggested-by: Gopal Vamshi Krishna <vamshi.krishna.gopal@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220511220450.85367-10-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12xhci: Remove quirk for over 10 year old evaluation hardwareMathias Nyman
The XHCI_RESET_EP_QUIRK was added in 2009 to support prototype xHC hardware from Fresco Logic that needed an additional configure endpoint command after a reset endpoint. That hardware should not have made it to the market. Now, 13 years later its about time we get rid of it. quirk was added in commit ac9d8fe7c6a8 ("USB: xhci: Add quirk for Fresco Logic xHCI hardware.") Print a debug message about the removed quirk if against all odds we run into this controller. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220511220450.85367-9-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12xhci: prevent U2 link power state if Intel tier policy prevented U1Mathias Nyman
Don't enable U1 or U2 Link powermanagenet (LPM) states for USB3 devices connected to tier 2 or further hubs. For unknown reasons we previously only prevented U1. Be consistent, and prevent both U1/U2 states if tier policy doesn't allow LPM. Also check the tier policy a bit earlier, and return if U1/U2 is not allowed. This avoids unnecessary xhci MEL commands. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220511220450.85367-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12xhci: use generic command timer for stop endpoint commands.Mathias Nyman
The 'stop endpoint' command timer was started when a 'stop endpoint' command was added to the command queue. This can trigger unwanted timeouts if there are several pending commands in the queue that xHC needs to handle first. The generic command timer, which was added later than the 'stop endpoint' timeout timer, times each command currently being handled by xHC hardware. A timed out stop endpoint command was treated as a more severe issue than other failed commands, so the separate stop endpoint timer was left unchanged. Use the generic command timer for stop endpoint commands. Identify if the timed out command was a stop endpoint command in the generic handler, and treat it with the same severity as earlier. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220511220450.85367-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12usb: host: xhci-plat: omit shared hcd if either root hub has no portsHeiner Kallweit
Activate the just added extension for xhci-plat and omit the shared hcd if either of the root hubs has no ports. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220511220450.85367-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12usb: host: xhci-plat: prepare operation w/o shared hcdHeiner Kallweit
This patch prepares xhci-plat for the following scenario - If either of the root hubs has no ports, then omit shared hcd - Main hcd can be USB3 if there are no USB2 ports Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220511220450.85367-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12usb: host: xhci-plat: create shared hcd after having added main hcdHeiner Kallweit
This patch is in preparation of an extension where in case of a root hub with no ports no shared hcd will be created. Whether one of the root hubs has no ports we figure our in usb_add_hcd() for the primary hcd. Therefore create the shared hcd only after this call. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220511220450.85367-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12xhci: prepare for operation w/o shared hcdHeiner Kallweit
This patch prepares xhci for the following scenario: - If either of the root hubs has no ports, then omit shared hcd - Main hcd can be USB3 if there are no USB2 ports Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220511220450.85367-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12xhci: factor out parts of xhci_gen_setup()Heiner Kallweit
Factoring out parts of xhci_gen_setup() has two motivations: - When adding functionaliy to omit shared hcd if not needed in a subsequent patch, we'll have to call xhci_hcd_init_usb3_data() from two places. - It reduces size of xhci_gen_setup() and makes it better readable. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220511220450.85367-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12xhci: Set HCD flag to defer primary roothub registrationKishon Vijay Abraham I
Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer registering primary roothub in usb_add_hcd() if xhci has two roothubs. This will make sure both primary roothub and secondary roothub will be registered along with the second HCD. This is required for cold plugged USB devices to be detected in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM or J7200 EVM). This patch has been added and reverted earier as it triggered a race in usb device enumeration. That race is now fixed in 5.16-rc3, and in stable back to 5.4 commit 6cca13de26ee ("usb: hub: Fix locking issues with address0_mutex") commit 6ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race") [minor rebase change, and commit message update -Mathias] CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20220510091630.16564-3-kishon@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12usb: host: ehci-xilinx: adding description for return valuePiyush Mehta
This patch resolves kernel-doc warnings to add return value description in function comments. Addressed warnings: drivers/usb/host/ehci-xilinx-of.c:37: warning: No description found for return value of 'ehci_xilinx_port_handed_over' drivers/usb/host/ehci-xilinx-of.c:117: warning: No description found for return value of 'ehci_hcd_xilinx_of_probe' drivers/usb/host/ehci-xilinx-of.c:201: warning: No description found for return value of 'ehci_hcd_xilinx_of_remove' Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com> Link: https://lore.kernel.org/r/20220509170252.28271-1-piyush.mehta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12usb: host: ehci-xilinx: Fix quoted string split across linesPiyush Mehta
This patch resolves checkpatch warnings for xilinx EHCI driver. Addressed warnings: WARNING: quoted string split across lines 50: FILE: drivers/usb/host/ehci-xilinx-of.c:50: + "The USB host controller does not support full speed " + "nor low speed devices\n"); WARNING: quoted string split across lines 53: FILE: drivers/usb/host/ehci-xilinx-of.c:53: + "You can reconfigure the host controller to have " + "full speed support\n"); Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com> Link: https://lore.kernel.org/r/20220510132252.26001-1-piyush.mehta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05usb: ehci-omap: drop unused ehci_read() functionArnd Bergmann
After moving the omap1 platform into generalized multiplatform support on ARM, the kernel test robot points out a W=1 warning that now shows up in more configurations: drivers/usb/host/ehci-omap.c:64:19: warning: unused function 'ehci_read' The function was last used 9 years ago and can just be removed. Fixes: 87425ad36330 ("USB: ehci-omap: Remove PHY reset handling code") Reported-by: kernel test robot <lkp@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220428102314.950323-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-03Merge 5.18-rc5 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here, and this resolves a merge issue in drivers/usb/dwc3/drd.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-23usb: remove third argument of usb_maxpacket()Vincent Mailhol
The third argument of usb_maxpacket(): in_out has been deprecated because it could be derived from the second argument (e.g. using usb_pipeout(pipe)). N.B. function usb_maxpacket() was made variadic to accommodate the transition from the old prototype with three arguments to the new one with only two arguments (so that no renaming is needed). The variadic argument is to be removed once all users of usb_maxpacket() get migrated. CC: Duncan Sands <duncan.sands@free.fr> CC: Alan Stern <stern@rowland.harvard.edu> CC: Olav Kongas <ok@artecdesign.ee> CC: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20220317035514.6378-7-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-23drivers: usb: host: Fix deadlock in oxu_bus_suspend()Duoming Zhou
There is a deadlock in oxu_bus_suspend(), which is shown below: (Thread 1) | (Thread 2) | timer_action() oxu_bus_suspend() | mod_timer() spin_lock_irq() //(1) | (wait a time) ... | oxu_watchdog() del_timer_sync() | spin_lock_irq() //(2) (wait timer to stop) | ... We hold oxu->lock in position (1) of thread 1, and use del_timer_sync() to wait timer to stop, but timer handler also need oxu->lock in position (2) of thread 2. As a result, oxu_bus_suspend() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irq(), which could let timer handler to obtain the needed lock. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220417120305.64577-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: host: ohci-omap: Make it CCF clk API compatibleJanusz Krzysztofik
The driver, OMAP1 specific, now omits clk_prepare/unprepare() steps, not supported by OMAP1 custom implementation of clock API. However, non-CCF stubs of those functions exist for use on such platforms until converted to CCF. Update the driver to be compatible with CCF implementation of clock API. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Link: https://lore.kernel.org/r/20220402114353.130775-1-jmkrzyszt@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21USB: host: isp116x: check return value after calling platform_get_resource()Zhen Ni
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Zhen Ni <nizhen@uniontech.com> Link: https://lore.kernel.org/r/20220302033716.31272-1-nizhen@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb:oxu210hp-hcd: Use platform_get_irq() to get the interruptMinghao Chi
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ) for requesting IRQ's resources any more, as they can be not ready yet in case of DT-booting. platform_get_irq() instead is a recommended way for getting IRQ even if it was not retrieved earlier. It also makes code simpler because we're getting "int" value right away and no conversion from resource to int is required. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220309053611.2081191-1-chi.minghao@zte.com.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: Prepare cleanup of powerpc's asm/prom.hChristophe Leroy
powerpc's asm/prom.h brings some headers that it doesn't need itself. In order to clean it up in a further step, first clean all files that include asm/prom.h Some files don't need asm/prom.h at all. For those ones, just remove inclusion of asm/prom.h Some files don't need any of the items provided by asm/prom.h, but need some of the headers included by asm/prom.h. For those ones, add the needed headers that are brought by asm/prom.h at the moment, then remove asm/prom.h Some files really need asm/prom.h but also need some of the headers included by asm/prom.h. For those one, leave asm/prom.h but also add the needed headers so that they can be removed from asm/prom.h in a later step. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/295e87a3094a92784657f7060fb0927e762a2e3c.1650011506.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21xhci: Enable runtime PM on second Alderlake controllerEvan Green
Alderlake has two XHCI controllers with PCI IDs 0x461e and 0x51ed. We had previously added the quirk to default enable runtime PM for 0x461e, now add it for 0x51ed as well. Signed-off-by: Evan Green <evgreen@chromium.org> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220408114225.1.Ibcff6b86ed4eacfe4c4bc89c90e18416f3900a3e@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21USB: Fix ehci infinite suspend-resume loop issue in zhaoxinWeitao Wango
In zhaoxin platform, some ehci projects will latch a wakeup signal internal when plug in a device on port during system S0. This wakeup signal will turn on when ehci runtime suspend, which will trigger a system control interrupt that will resume ehci back to D0. As no device connect, ehci will be set to runtime suspend and turn on the internal latched wakeup signal again. It will cause a suspend-resume loop and generate system control interrupt continuously. Fixed this issue by clear wakeup signal latched in ehci internal when ehci resume callback is called. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> Link: https://lore.kernel.org/r/20220324121735.3803-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: xhci: tegra:Fix PM usage reference leak of ↵zhangqilong
tegra_xusb_unpowergate_partitions pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 41a7426d25fa ("usb: xhci: tegra: Unlink power domain devices") Cc: stable <stable@vger.kernel.org> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20220319023822.145641-1-zhangqilong3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21ARM: omap1: innovator: move ohci phy power handling to board fileArnd Bergmann
The innovator board needs a special case for its phy control. Move the corresponding code into the board file and out of the common code by adding another callback. Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-21usb: omap: avoid mach/*.h headersArnd Bergmann
The omap usb drivers still rely on mach/*.h headers that are explicitly or implicitly included, but all the required definitions are now in include/linux/soc/ti/, so use those instead and allow compile-testing on other architectures. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-21ARM: omap1: move mach/usb.h to include/linux/socArnd Bergmann
The register definitions in this header are used in at least four different places, with little hope of completely cleaning that up. Split up the file into a portion that becomes a linux-wide header under include/linux/soc/ti/, and the parts that are actually only needed by board files. Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-19ARM: pxa: split up mach/hardware.hArnd Bergmann
The mach/hardware.h is included in lots of places, and it provides three different things on pxa: - the cpu_is_pxa* macros - an indirect inclusion of mach/addr-map.h - the __REG() and io_pv2() helper macros Split it up into separate <linux/soc/pxa/cpu.h> and mach/pxa-regs.h headers, then change all the files that use mach/hardware.h to include the exact set of those three headers that they actually need, allowing for further more targeted cleanup. linux/soc/pxa/cpu.h can remain permanently exported and is now in a global location along with similar headers. pxa-regs.h and addr-map.h are only used in a very small number of drivers now and can be moved to arch/arm/mach-pxa/ directly when those drivers are to pass the necessary data as resources. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-rtc@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-09xhci: increase usb U3 -> U0 link resume timeout from 100ms to 500msMathias Nyman
The first U3 wake signal by the host may be lost if the USB 3 connection is tunneled over USB4, with a runtime suspended USB4 host, and firmware implemented connection manager. Specs state the host must wait 100ms (tU3WakeupRetryDelay) before resending a U3 wake signal if device doesn't respond, leading to U3 -> U0 link transition times around 270ms in the tunneled case. Fixes: 0200b9f790b0 ("xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220408134823.2527272-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-12 05:24:20 +0000