summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2020-07-09usb: chipidea: core: Document hw_port_test_set()'s missing 'ci' argumentLee Jones
Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/core.c:163: warning: Function parameter or member 'ci' not described in 'hw_port_test_set' Cc: Peter Chen <Peter.Chen@nxp.com> Cc: David Lopo <dlopo@chipidea.mips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-8-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: misc: adutux: Demote obvious misuse of kerneldoc to standard comment blocksLee Jones
No attempt has been made to document any of the functions here. Fixes the following W=1 kernel build warning(s): drivers/usb/misc/adutux.c:117: warning: Function parameter or member 'dev' not described in 'adu_abort_transfers' drivers/usb/misc/adutux.c:653: warning: Function parameter or member 'interface' not described in 'adu_probe' drivers/usb/misc/adutux.c:653: warning: Function parameter or member 'id' not described in 'adu_probe' drivers/usb/misc/adutux.c:762: warning: Function parameter or member 'interface' not described in 'adu_disconnect' Cc: Johan Hovold <johan@kernel.org> Cc: David Glance <davidgsf@sourceforge.net> Cc: Juergen Stuber <stuber@loria.fr> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-7-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: atm: ueagle-atm: Demote obvious misuse of kerneldoc to standard comment ↵Lee Jones
blocks No attempt has been made to document any of the functions here. Fixes the following W=1 kernel build warning(s): drivers/usb/atm/ueagle-atm.c:578: warning: Function parameter or member 'usb' not described in 'uea_send_modem_cmd' drivers/usb/atm/ueagle-atm.c:578: warning: Function parameter or member 'addr' not described in 'uea_send_modem_cmd' drivers/usb/atm/ueagle-atm.c:578: warning: Function parameter or member 'size' not described in 'uea_send_modem_cmd' drivers/usb/atm/ueagle-atm.c:578: warning: Function parameter or member 'buff' not described in 'uea_send_modem_cmd' drivers/usb/atm/ueagle-atm.c:679: warning: Function parameter or member 'usb' not described in 'uea_load_firmware' drivers/usb/atm/ueagle-atm.c:679: warning: Function parameter or member 'ver' not described in 'uea_load_firmware' Cc: Matthieu CASTET <castet.matthieu@free.fr> Cc: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Damien Bergamini <damien.bergamini@free.fr> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-6-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: core: ledtrig-usbport: Demote obvious misuse of kerneldoc to standard ↵Lee Jones
comment blocks No attempt has been made to document any of the functions here. Fixes the following W=1 kernel build warning(s): drivers/usb/core/ledtrig-usbport.c:42: warning: Function parameter or member 'usbport_data' not described in 'usbport_trig_usb_dev_observed' drivers/usb/core/ledtrig-usbport.c:42: warning: Function parameter or member 'usb_dev' not described in 'usbport_trig_usb_dev_observed' drivers/usb/core/ledtrig-usbport.c:71: warning: Function parameter or member 'usbport_data' not described in 'usbport_trig_update_count' drivers/usb/core/ledtrig-usbport.c:131: warning: Function parameter or member 'usbport_data' not described in 'usbport_trig_port_observed' drivers/usb/core/ledtrig-usbport.c:131: warning: Function parameter or member 'usb_dev' not described in 'usbport_trig_port_observed' drivers/usb/core/ledtrig-usbport.c:131: warning: Function parameter or member 'port1' not described in 'usbport_trig_port_observed' Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-4-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: host: ohci-s3c2410: Demote obvious misuse of kerneldoc to standard ↵Lee Jones
comment block No attempt has been made to document the function here. Fixes the following W=1 kernel build warning(s): drivers/usb/host/ohci-s3c2410.c:356: warning: Function parameter or member 'dev' not described in 'ohci_hcd_s3c2410_probe' Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Roman Weissgaerber <weissg@vienna.at> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Christopher Hoover <ch@hpl.hp.com> Cc: Ben Dooks <ben@simtec.co.uk> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-3-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: mtu3: mtu3_debug: Add forward declaration of 'struct ssusb_mtk'Lee Jones
Without it, the build system complains that it was declared inside the parameter list. Fixes the following W=1 kernel build warning(s): In file included from drivers/usb/mtu3/mtu3_trace.c:11: drivers/usb/mtu3/mtu3_debug.h:29:36: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration 29 | void ssusb_dev_debugfs_init(struct ssusb_mtk *ssusb); | ^~~~~~~~~ drivers/usb/mtu3/mtu3_debug.h:30:35: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration 30 | void ssusb_dr_debugfs_init(struct ssusb_mtk *ssusb); | ^~~~~~~~~ drivers/usb/mtu3/mtu3_debug.h:31:39: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration 31 | void ssusb_debugfs_create_root(struct ssusb_mtk *ssusb); | ^~~~~~~~~ drivers/usb/mtu3/mtu3_debug.h:32:39: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration 32 | void ssusb_debugfs_remove_root(struct ssusb_mtk *ssusb); | ^~~~~~~~~ Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: linux-mediatek@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-2-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: ehci-omap: Drop surplus includeLinus Walleij
The EHCI OMAP driver includes <linux/gpio.h> but does not use any symbols from this file, so drop it. Cc: Roger Quadros <rogerq@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200703131059.515436-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09USB: serial: drop redundant transfer-buffer castsJohan Hovold
Drop redundant URB transfer-buffer casts. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09USB: serial: add sysrq break-handler dummyJohan Hovold
Add inline sysrq break-handler dummy to allow the compiler to eliminate further code when either console or sysrq support isn't enabled and to clearly mark the two sysrq functions as belonging together. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09USB: serial: inline sysrq dummy functionJohan Hovold
Inline the dummy sysrq character handling when either console support or magic-sysrq support isn't enabled to allow the compiler to eliminate unused code. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09USB: serial: only process sysrq when enabledJohan Hovold
Do not set the sysrq timestamp unless CONFIG_MAGIC_SYSRQ is enabled to avoid unnecessary per-character processing for consoles. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09USB: serial: only set sysrq timestamp for consolesJohan Hovold
Only set the sysrq timestamp for console ports to avoid having every driver also check the console flag when processing incoming data. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09USB: serial: ftdi_sio: fix break and sysrq handlingJohan Hovold
Only the last NUL in a packet should be flagged as a break character, for example, to avoid dropping unrelated characters when IGNBRK is set. Also make sysrq work by consuming the break character instead of having it immediately cancel the sysrq request, and by not processing it prematurely to avoid triggering a sysrq based on an unrelated character received in the same packet (which was received *before* the break). Note that the break flag can be left set also for a packet received immediately following a break and that and an ending NUL in such a packet will continue to be reported as a break as there's no good way to tell it apart from an actual break. Tested on FT232R and FT232H. Fixes: 72fda3ca6fc1 ("USB: serial: ftd_sio: implement sysrq handling on break") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09USB: serial: ftdi_sio: clean up receive processingJohan Hovold
Clean up receive processing by dropping the character pointer and keeping the length argument unchanged throughout the function. Also make it more apparent that sysrq processing can consume a characters by adding an explicit continue. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09USB: serial: ftdi_sio: make process-packet buffer unsignedJohan Hovold
Use an unsigned type for the process-packet buffer argument and give it a more apt name. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09usb: gadget: function: fix missing spinlock in f_uac1_legacyZhang Qiang
Add a missing spinlock protection for play_queue, because the play_queue may be destroyed when the "playback_work" work func and "f_audio_out_ep_complete" callback func operate this paly_queue at the same time. Fixes: c6994e6f067cf ("USB: gadget: add USB Audio Gadget driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Zhang Qiang <qiang.zhang@windriver.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: gadget: udc: atmel: fix uninitialized read in debug printkMichał Mirosław
Fixed commit moved the assignment of 'req', but did not update a reference in the DBG() call. Use the argument as it was renamed. Fixes: 5fb694f96e7c ("usb: gadget: udc: atmel: fix possible oops when unloading module") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: gadget: udc: atmel: remove outdated comment in usba_ep_disable()Michał Mirosław
Fixed commit removed the offending behaviour from the driver, but missed the comment and associated test. Remove them now. Fixes: 38e58986e6fc ("usb: gadget: udc: atmel: don't disable enpdoints we don't own") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: dwc2: Fix shutdown callback in platformMinas Harutyunyan
To avoid lot of interrupts from dwc2 core, which can be asserted in specific conditions need to disable interrupts on HW level instead of disable IRQs on Kernel level, because of IRQ can be shared between drivers. Cc: stable@vger.kernel.org Fixes: a40a00318c7fc ("usb: dwc2: add shutdown callback to platform variant") Tested-by: Frank Mori Hess <fmh6jj@gmail.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Frank Mori Hess <fmh6jj@gmail.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: cdns3: trace: fix some endian issuesPeter Chen
It is found by sparse. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: cdns3: ep0: fix some endian issuesPeter Chen
It is found by sparse. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()Evgeny Novikov
gr_ep_init() does not assign the allocated request anywhere if allocation of memory for the buffer fails. This is a memory leak fixed by the given patch. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: gadget: fix langid kernel-doc warning in usbstring.cRandy Dunlap
Fix spelling of the 'langid' function argument in the kernel-doc notation to quieten a kernel-doc warning. ../drivers/usb/gadget/usbstring.c:77: warning: Function parameter or member 'langid' not described in 'usb_validate_langid' ../drivers/usb/gadget/usbstring.c:77: warning: Excess function parameter 'lang' description in 'usb_validate_langid' Fixes: 17309a6a4356 ("usb: gadget: add "usb_validate_langid" function") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Tao Ren <rentao.bupt@gmail.com> Cc: Tao Ren <rentao.bupt@gmail.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: dwc3: pci: add support for the Intel Jasper LakeHeikki Krogerus
This patch adds the necessary PCI ID for Intel Jasper Lake devices. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variantHeikki Krogerus
This patch adds the necessary PCI ID for TGP-H devices. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-08Merge tag 'usb-serial-5.8-rc5' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.8-rc5 Here are some new device ids for 5.8. All have been in linux-next with no reported issues. * tag 'usb-serial-5.8-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Quectel EG95 LTE modem USB: serial: ch341: add new Product ID for CH340 USB: serial: option: add GosunCn GM500 series USB: serial: cypress_m8: enable Simply Automated UPB PIM
2020-07-08USB: serial: use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-07usb: correct kernel-doc inconsistencyColton Lewis
Silence documentation build warning by correcting kernel-doc comment for sub_validate_langid function. ./drivers/usb/gadget/usbstring.c:77: warning: Function parameter or member 'langid' not described in 'usb_validate_langid' ./drivers/usb/gadget/usbstring.c:77: warning: Excess function parameter 'lang' description in 'usb_validate_langid' Signed-off-by: Colton Lewis <colton.w.lewis@protonmail.com> Link: https://lore.kernel.org/r/20200707045207.235540-1-colton.w.lewis@protonmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-07usb: chipidea: core: add wakeup support for extconPeter Chen
If wakeup event occurred by extcon event, it needs to call ci_irq again since the first ci_irq calling at extcon notifier only wakes up controller, but do noop for event handling, it causes the extcon use case can't work well from low power mode. Cc: <stable@vger.kernel.org> Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Reported-by: Philippe Schenker <philippe.schenker@toradex.com> Tested-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200707060601.31907-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-07USB: serial: option: add Quectel EG95 LTE modemAceLan Kao
Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0195 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-07USB: serial: ch341: fix missing simulated-break marginMichael Hanselmann
On devices which do not support break signalling a break condition is simulated by sending a NUL byte at the lowest possible speed. The break condition will be 9 bit periods long (start bit and eight data bits), but the transmission itself also includes the stop bit. Add the missing safety margin of one bit which is intended to account for timing differences, and fix up the corresponding comment. Signed-off-by: Michael Hanselmann <public@hansmi.ch> Link: https://lore.kernel.org/r/9909b288-294d-16b9-9f14-51eb79c63b6c@msgid.hansmi.ch [ johan: amend commit message ] Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-06udc: lpc32xx: mark local function staticArnd Bergmann
The kernel test robot reports two functions that should be marked static: >> drivers/usb/gadget/udc/lpc32xx_udc.c:1928:6: warning: no previous prototype for 'udc_send_in_zlp' [-Wmissing-prototypes] 1928 | void udc_send_in_zlp(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) >> drivers/usb/gadget/udc/lpc32xx_udc.c:1942:6: warning: no previous prototype for 'udc_handle_eps' [-Wmissing-prototypes] 1942 | void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) This showed up after my commit 792e559e94bc ("udc: lpc32xx: fix 64-bit compiler warning") made it possible to build the driver on x86-64. Fix the warning as suggested. Reported-by: kernel test robot <lkp@intel.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-06USB: serial: cp210x: re-enable auto-RTS on openBrant Merryman
CP210x hardware disables auto-RTS but leaves auto-CTS when in hardware flow control mode and UART on cp210x hardware is disabled. When re-opening the port, if auto-CTS is enabled on the cp210x, then auto-RTS must be re-enabled in the driver. Signed-off-by: Brant Merryman <brant.merryman@silabs.com> Co-developed-by: Phu Luu <phu.luu@silabs.com> Signed-off-by: Phu Luu <phu.luu@silabs.com> Link: https://lore.kernel.org/r/ECCF8E73-91F3-4080-BE17-1714BC8818FB@silabs.com [ johan: fix up tags and problem description ] Fixes: 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control") Cc: stable <stable@vger.kernel.org> # 2.6.12 Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-06USB: serial: cp210x: enable usb generic throttle/unthrottleBrant Merryman
Assign the .throttle and .unthrottle functions to be generic function in the driver structure to prevent data loss that can otherwise occur if the host does not enable USB throttling. Signed-off-by: Brant Merryman <brant.merryman@silabs.com> Co-developed-by: Phu Luu <phu.luu@silabs.com> Signed-off-by: Phu Luu <phu.luu@silabs.com> Link: https://lore.kernel.org/r/57401AF3-9961-461F-95E1-F8AFC2105F5E@silabs.com [ johan: fix up tags ] Fixes: 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control") Cc: stable <stable@vger.kernel.org> # 2.6.12 Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-06USB: serial: ch341: simulate break condition if not supportedMichael Hanselmann
A subset of all CH341 devices don't support a real break condition. This fact is already used in the "ch341_detect_quirks" function. With this change a quirk is implemented to simulate a break condition by temporarily lowering the baud rate and sending a NUL byte. The primary drawbacks of this approach are that the duration of the break can't be controlled by userland and that data incoming during a simulated break is corrupted. The "TTY_DRIVER_HARDWARE_BREAK" serial driver flag was investigated as an alternative. It's a driver-wide flag and would've required significant changes to the serial and USB-serial driver frameworks to expose it for individual USB-serial adapters. Tested by sending a break condition and watching the TX pin using an oscilloscope. Signed-off-by: Michael Hanselmann <public@hansmi.ch> Link: https://lore.kernel.org/r/f34a9b6e-ec2a-0873-e97b-2d5b2170e2ff@msgid.hansmi.ch [ johan: condense info message ] Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-03usb: dwc2: gadget: Remove assigned but never used 'maxsize'Lee Jones
The value of 'maxsize' has not been checked since commit 729cac693eecf ("usb: dwc2: Change ISOC DDMA flow") back in 2018, so remove the set but unused variable, which fixes the following W=1 kernel build warning: drivers/usb/dwc2/gadget.c: In function ‘dwc2_gadget_fill_isoc_desc’: drivers/usb/dwc2/gadget.c:885:6: warning: variable ‘maxsize’ set but not used [-Wunused-but-set-variable] 885 | u32 maxsize = 0; | ^~~~~~~ Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-11-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03USB: phy: fsl-usb: remove character device usageGreg Kroah-Hartman
No idea why this driver is using a char device node, statically allocated, with no dynamic allocation or hook up with devtmpfs, along with a reserverd major number, for "special" operations, not all of which ever were implemented. So just rip it out, as no one must be using it because no modern system will ever actually create the /dev/ node it needs. Cc: Felipe Balbi <balbi@kernel.org> Reviewed-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200702072914.1072878-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03USB: phy: fsl-usb: remove sysfs abuseGreg Kroah-Hartman
This file has a HUGE debugging sysfs file that spews out a lot of information all at once, which violates the one-value-per-file rule for sysfs. If this is really needed, it should go into debugfs, but given the age of this driver, I strongly doubt anyone is using it anymore. So just remove the file entirely, it was never documented, so obviously, no one actually needed it :) Cc: Felipe Balbi <balbi@kernel.org> Reviewed-by: Ran Wang <ran.wang_1@nxp.com> Link: https://lore.kernel.org/r/20200702072914.1072878-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: host: oxu210hp-hcd: Move declaration of 'qtd' into 'ifdef OXU_URB_TRACE'Lee Jones
If we assign 'epnum' during the declaration we can also avoid "ISO C90 forbids mixed declarations" issues. So it does looks like we can have our cake and eat it in this scenario. Fixes the following W=1 kernel build warning(s): drivers/usb/host/oxu210hp-hcd.c: In function ‘submit_async’: drivers/usb/host/oxu210hp-hcd.c:2040:19: warning: variable ‘qtd’ set but not used [-Wunused-but-set-variable] 2040 | struct ehci_qtd *qtd; | ^~~ Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Rodolfo Giometti <giometti@linux.it> Cc: "Eurotech S.p.A" <info@eurtech.it> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-24-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: c67x00: c67x00-sched: Demote obvious misuse of kerneldoc to standard ↵Lee Jones
comment blocks No attempt has been made to document any of the functions here. Fixes the following W=1 kernel build warning(s): drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'queue' not described in 'c67x00_ep_data' drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'node' not described in 'c67x00_ep_data' drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'hep' not described in 'c67x00_ep_data' drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'dev' not described in 'c67x00_ep_data' drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'next_frame' not described in 'c67x00_ep_data' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'ly_base_addr' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'port_length' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'pid_ep' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'dev_addr' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'ctrl_reg' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'status' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'retry_cnt' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'residue' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'next_td_addr' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'td_list' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'td_addr' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'data' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'urb' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'privdata' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'ep_data' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'pipe' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:137: warning: Function parameter or member 'c67x00' not described in 'dbg_td' drivers/usb/c67x00/c67x00-sched.c:137: warning: Function parameter or member 'td' not described in 'dbg_td' drivers/usb/c67x00/c67x00-sched.c:137: warning: Function parameter or member 'msg' not described in 'dbg_td' drivers/usb/c67x00/c67x00-sched.c:169: warning: Function parameter or member 'a' not described in 'frame_add' drivers/usb/c67x00/c67x00-sched.c:169: warning: Function parameter or member 'b' not described in 'frame_add' drivers/usb/c67x00/c67x00-sched.c:177: warning: Function parameter or member 'a' not described in 'frame_after' drivers/usb/c67x00/c67x00-sched.c:177: warning: Function parameter or member 'b' not described in 'frame_after' drivers/usb/c67x00/c67x00-sched.c:186: warning: Function parameter or member 'a' not described in 'frame_after_eq' drivers/usb/c67x00/c67x00-sched.c:186: warning: Function parameter or member 'b' not described in 'frame_after_eq' drivers/usb/c67x00/c67x00-sched.c:199: warning: Function parameter or member 'c67x00' not described in 'c67x00_release_urb' drivers/usb/c67x00/c67x00-sched.c:199: warning: Function parameter or member 'urb' not described in 'c67x00_release_urb' drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'c67x00' not described in 'c67x00_create_td' drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'urb' not described in 'c67x00_create_td' drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'data' not described in 'c67x00_create_td' drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'len' not described in 'c67x00_create_td' drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'pid' not described in 'c67x00_create_td' drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'toggle' not described in 'c67x00_create_td' drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'privdata' not described in 'c67x00_create_td' drivers/usb/c67x00/c67x00-sched.c:692: warning: Function parameter or member 'c67x00' not described in 'c67x00_add_ctrl_urb' drivers/usb/c67x00/c67x00-sched.c:692: warning: Function parameter or member 'urb' not described in 'c67x00_add_ctrl_urb' drivers/usb/c67x00/c67x00-sched.c:830: warning: Function parameter or member 'c67x00' not described in 'c67x00_parse_td' drivers/usb/c67x00/c67x00-sched.c:830: warning: Function parameter or member 'td' not described in 'c67x00_parse_td' drivers/usb/c67x00/c67x00-sched.c:978: warning: Function parameter or member 'c67x00' not described in 'c67x00_check_td_list' drivers/usb/c67x00/c67x00-sched.c:1052: warning: Function parameter or member 'c67x00' not described in 'c67x00_send_td' drivers/usb/c67x00/c67x00-sched.c:1052: warning: Function parameter or member 'td' not described in 'c67x00_send_td' drivers/usb/c67x00/c67x00-sched.c:1088: warning: Function parameter or member 'c67x00' not described in 'c67x00_do_work' Cc: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-31-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: class: usbtmc: File headers are not good candidates for kerneldocLee Jones
Demote usbtmc's file header to a standard comment block. Fixes the following W=1 kernel build warning(s): drivers/usb/class/usbtmc.c:11: warning: Function parameter or member 'fmt' not described in 'pr_fmt' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-30-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: c67x00: c67x00-ll-hpi: Demote obvious misuse of kerneldoc to standard ↵Lee Jones
comment blocks No attempt has been made to document any of the functions here. Fixes the following W=1 kernel build warning(s): drivers/usb/c67x00/c67x00-ll-hpi.c:269: warning: Function parameter or member 'sie' not described in 'c67x00_ll_usb_clear_status' drivers/usb/c67x00/c67x00-ll-hpi.c:269: warning: Function parameter or member 'bits' not described in 'c67x00_ll_usb_clear_status' drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'dev' not described in 'c67x00_ll_write_mem_le16' drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'addr' not described in 'c67x00_ll_write_mem_le16' drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'data' not described in 'c67x00_ll_write_mem_le16' drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'len' not described in 'c67x00_ll_write_mem_le16' drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'dev' not described in 'c67x00_ll_read_mem_le16' drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'addr' not described in 'c67x00_ll_read_mem_le16' drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'data' not described in 'c67x00_ll_read_mem_le16' drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'len' not described in 'c67x00_ll_read_mem_le16' Cc: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-27-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: mtu3: mtu3_core: Demote obvious misuse of kerneldoc to standard comment ↵Lee Jones
block No attempt has been made to document the function. Fixes the following W=1 kernel build warning(s): drivers/usb/mtu3/mtu3_core.c:805: warning: Function parameter or member 'mtu' not described in 'mtu3_set_dma_mask' Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-26-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: cdns3: ep0: Move 'zlp' description to appropriate function headerLee Jones
'zlp' was documented, but in the wrong place. Fixes the following W=1 kernel build warning(s): drivers/usb/cdns3/ep0.c:36: warning: Function parameter or member 'zlp' not described in 'cdns3_ep0_run_transfer' drivers/usb/cdns3/ep0.c:705: warning: Excess function parameter 'zlp' description in 'cdns3_gadget_ep0_queue' Cc: Pawel Laszczak <pawell@cadence.com> Cc: Pawel Jez <pjez@cadence.com> Cc: Peter Chen <peter.chen@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-23-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: host: ohci: Mark cc_to_error as __maybe_unusedLee Jones
drivers/usb/host/ohci.h in included by a whole much of different sourcefiles. Not all of them make use of cc_to_error. So mark it as __maybe_used to convey that this behaviour is not only acceptable it's expected. Fixes the following kernel build warning(s): In file included from drivers/usb/host/ohci-pci.c:25: drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=] 165 | static const int cc_to_error 1 = { | ^~~~~~~~~~~ In file included from drivers/usb/host/ohci-platform.c:32: drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=] 165 | static const int cc_to_error 1 = { | ^~~~~~~~~~~ In file included from drivers/usb/host/ohci-exynos.c:20: drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=] 165 | static const int cc_to_error 1 = { | ^~~~~~~~~~~ In file included from drivers/usb/host/ohci-spear.c:22: drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=] 165 | static const int cc_to_error 1 = { | ^~~~~~~~~~~ In file included from drivers/usb/host/ohci-st.c:26: drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=] 165 | static const int cc_to_error 1 = { | ^~~~~~~~~~~ In file included from drivers/usb/host/ohci-at91.c:31: drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=] 165 | static const int cc_to_error 1 = { | ^~~~~~~~~~~ In file included from drivers/usb/host/ohci-s3c2410.c:32: drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=] 165 | static const int cc_to_error 1 = { | ^~~~~~~~~~~ Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Roman Weissgaerber <weissg@vienna.at> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-22-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: host: ohci-at91: Demote kerneldoc headers down to basic comment blocksLee Jones
Neither usb_hcd_at91_probe() nor usb_hcd_at91_remove()'s function headers reach the standards required of a kerneldoc entry. Only one attempt at describing an argument was made, as it is not correct (we're removing that too to save confusion). Fixes the following kernel build warning(s): drivers/usb/host/ohci-at91.c:166: warning: Function parameter or member 'driver' not described in 'usb_hcd_at91_probe' drivers/usb/host/ohci-at91.c:166: warning: Function parameter or member 'pdev' not described in 'usb_hcd_at91_probe' drivers/usb/host/ohci-at91.c:259: warning: Function parameter or member 'hcd' not described in 'usb_hcd_at91_remove' drivers/usb/host/ohci-at91.c:259: warning: Function parameter or member 'pdev' not described in 'usb_hcd_at91_remove' drivers/usb/host/ohci-at91.c:259: warning: Excess function parameter 'dev' description in 'usb_hcd_at91_remove' Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Thibaut VARENE <varenet@parisc-linux.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-21-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: host: isp1362: Mark the many unused ISP1362_REG entries as __maybe_unusedLee Jones
It would seem a shame to strip out all of the unused register entries, since they can act as a fair source of documentation. Instead, mark them all as __maybe_unused to show the build system that this behaviour is known and intentional. Fixes the following kernel build warning(s): In file included from drivers/usb/host/isp1362-hcd.c:96: drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGALTTMR’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:199:1: note: in expansion of macro ‘ISP1362_REG’ 199 | ISP1362_REG(OTGALTTMR, 0x6C, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGTIMER’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:198:1: note: in expansion of macro ‘ISP1362_REG’ 198 | ISP1362_REG(OTGTIMER, 0x6A, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGINTENB’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:197:1: note: in expansion of macro ‘ISP1362_REG’ 197 | ISP1362_REG(OTGINTENB, 0x69, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGINT’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:196:1: note: in expansion of macro ‘ISP1362_REG’ 196 | ISP1362_REG(OTGINT, 0x68, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGSTATUS’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:195:1: note: in expansion of macro ‘ISP1362_REG’ 195 | ISP1362_REG(OTGSTATUS, 0x67, REG_WIDTH_16, REG_ACCESS_R); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGCONTROL’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:194:1: note: in expansion of macro ‘ISP1362_REG’ 194 | ISP1362_REG(OTGCONTROL, 0x62, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCATLPORT’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:183:1: note: in expansion of macro ‘ISP1362_REG’ 183 | ISP1362_REG(HCATLPORT, 0x44, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCINTLPORT’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:175:1: note: in expansion of macro ‘ISP1362_REG’ 175 | ISP1362_REG(HCINTLPORT, 0x43, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCISTL1PORT’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:171:1: note: in expansion of macro ‘ISP1362_REG’ 171 | ISP1362_REG(HCISTL1PORT, 0x42, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCISTL0PORT’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:170:1: note: in expansion of macro ‘ISP1362_REG’ 170 | ISP1362_REG(HCISTL0PORT, 0x40, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCINTDIS’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:77:1: note: in expansion of macro ‘ISP1362_REG’ 77 | ISP1362_REG(HCINTDIS, 0x05, REG_WIDTH_32, REG_ACCESS_RW); | ^~~~~~~~~~~ Cc: "by L. Wassmann" <LW@KARO-electronics.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-20-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: dwc3: dwc3-of-simple: Function headers are not good candidates for ↵Lee Jones
kerneldoc Fixes the following kernel build warning(s): drivers/usb/dwc3/dwc3-of-simple.c:25: warning: cannot understand function prototype: 'struct dwc3_of_simple ' Cc: Felipe Balbi <balbi@kernel.org> Cc: iivanov@mm-sol.com Cc: Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-19-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: cdns3: gadget: Fix a bunch of kernel doc issuesLee Jones
Mainline misspelled function argument descriptions. Also one formatting issue with a missing '@' identifier. Fixes the following W=1 build warnings: drivers/usb/cdns3/gadget.c:653: warning: Function parameter or member 'priv_ep' not described in 'cdns3_wa2_descmissing_packet' drivers/usb/cdns3/gadget.c:653: warning: Excess function parameter 'priv_dev' description in 'cdns3_wa2_descmissing_packet' drivers/usb/cdns3/gadget.c:1088: warning: Function parameter or member 'request' not described in 'cdns3_ep_run_transfer' drivers/usb/cdns3/gadget.c:2574: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_set_halt' drivers/usb/cdns3/gadget.c:2574: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_set_halt' drivers/usb/cdns3/gadget.c:2595: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_clear_halt' drivers/usb/cdns3/gadget.c:2595: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_clear_halt' drivers/usb/cdns3/gadget.c:2898: warning: Function parameter or member 'priv_dev' not described in 'cdns3_init_eps' drivers/usb/cdns3/gadget.c:2898: warning: Excess function parameter 'cdns3' description in 'cdns3_init_eps' drivers/usb/cdns3/gadget.c:3210: warning: Function parameter or member 'cdns' not described in 'cdns3_gadget_init' Cc: Pawel Laszczak <pawell@cadence.com> Cc: Pawel Jez <pjez@cadence.com> Cc: Peter Chen <peter.chen@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-18-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: dwc3: dwc3-haps: Function headers are not suitable for kerneldocLee Jones
Fixes the following W=1 kernel build warnings: drivers/usb/dwc3/dwc3-haps.c:19: warning: Incorrect use of kernel-doc format: * struct dwc3_haps - Driver private structure drivers/usb/dwc3/dwc3-haps.c:23: warning: cannot understand function prototype: 'struct dwc3_haps ' Cc: Felipe Balbi <balbi@kernel.org> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: John Youn <johnyoun@synopsys.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-16-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-13 07:15:47 +0000