| Age | Commit message (Collapse) | Author |
|---|
|
Older cp210x devices only support a fixed set of line speeds to which a
requested speed is mapped. Reimplement this mapping using a table
instead of a long if-else construct.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The list [1] of commits doing endianness fixes in USB subsystem is long
due to below quote from USB spec Revision 2.0 from April 27, 2000:
------------
8.1 Byte/Bit Ordering
Multiple byte fields in standard descriptors, requests, and responses
are interpreted as and moved over the bus in little-endian order, i.e.
LSB to MSB.
------------
This commit belongs to the same family.
[1] Example of endianness fixes in USB subsystem:
commit 14e1d56cbea6 ("usb: gadget: f_uac2: endianness fixes.")
commit 42370b821168 ("usb: gadget: f_uac1: endianness fixes.")
commit 63afd5cc7877 ("USB: chaoskey: fix Alea quirk on big-endian hosts")
commit 74098c4ac782 ("usb: gadget: acm: fix endianness in notifications")
commit cdd7928df0d2 ("ACM gadget: fix endianness in notifications")
commit 323ece54e076 ("cdc-wdm: fix endianness bug in debug statements")
commit e102609f1072 ("usb: gadget: uvc: Fix endianness mismatches")
list goes on
Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Make sure only to copy any actual data rather than the whole buffer,
when releasing the temporary buffer used for unaligned non-isochronous
transfers.
Taken directly from commit 0efd937e27d5e ("USB: ehci-tegra: fix inefficient
copy of unaligned buffers")
Tested with Lantiq xRX200 (MIPS) and RPi Model B Rev 2 (ARM)
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
The commit 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more
supported way") introduced a common way to align DMA allocations.
The code in the commit aligns the struct dma_aligned_buffer but the
actual DMA address pointed by data[0] gets aligned to an offset from
the allocated boundary by the kmalloc_ptr and the old_xfer_buffer
pointers.
This is against the recommendation in Documentation/DMA-API.txt which
states:
Therefore, it is recommended that driver writers who don't take
special care to determine the cache line size at run time only map
virtual regions that begin and end on page boundaries (which are
guaranteed also to be cache line boundaries).
The effect of this is that architectures with non-coherent DMA caches
may run into memory corruption or kernel crashes with Unhandled
kernel unaligned accesses exceptions.
Fix the alignment by positioning the DMA area in front of the allocation
and use memory at the end of the area for storing the orginal
transfer_buffer pointer. This may have the added benefit of increased
performance as the DMA area is now fully aligned on all architectures.
Tested with Lantiq xRX200 (MIPS) and RPi Model B Rev 2 (ARM).
Fixes: 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more supported way")
Cc: <stable@vger.kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
The Aspeed SoC has a memory ordering issue that (thankfully)
only affects the USB gadget device. A read back is necessary
after writing to memory and before letting the device DMA
from it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Variable maxpacket is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'maxpacket' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
For unidirectional endpoints, the endpoint pointer will be NULL for the
unused direction. Check that the endpoint is active before
dereferencing this pointer.
Fixes: 1b4977c793d3 ("usb: dwc2: Update dwc2_handle_incomplete_isoc_in() function")
Fixes: 689efb2619b5 ("usb: dwc2: Update dwc2_handle_incomplete_isoc_out() function")
Fixes: d84845522d93 ("usb: dwc2: Update GINTSTS_GOUTNAKEFF interrupt handling")
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Fix build errors when built for PPC64:
These variables are only used on PPC32 so they don't need to be
initialized for PPC64.
../drivers/usb/phy/phy-fsl-usb.c: In function 'usb_otg_start':
../drivers/usb/phy/phy-fsl-usb.c:865:3: error: '_fsl_readl' undeclared (first use in this function); did you mean 'fsl_readl'?
_fsl_readl = _fsl_readl_be;
../drivers/usb/phy/phy-fsl-usb.c:865:16: error: '_fsl_readl_be' undeclared (first use in this function); did you mean 'fsl_readl'?
_fsl_readl = _fsl_readl_be;
../drivers/usb/phy/phy-fsl-usb.c:866:3: error: '_fsl_writel' undeclared (first use in this function); did you mean 'fsl_writel'?
_fsl_writel = _fsl_writel_be;
../drivers/usb/phy/phy-fsl-usb.c:866:17: error: '_fsl_writel_be' undeclared (first use in this function); did you mean 'fsl_writel'?
_fsl_writel = _fsl_writel_be;
../drivers/usb/phy/phy-fsl-usb.c:868:16: error: '_fsl_readl_le' undeclared (first use in this function); did you mean 'fsl_readl'?
_fsl_readl = _fsl_readl_le;
../drivers/usb/phy/phy-fsl-usb.c:869:17: error: '_fsl_writel_le' undeclared (first use in this function); did you mean 'fsl_writel'?
_fsl_writel = _fsl_writel_le;
and the sysfs "show" function return type should be ssize_t, not int:
../drivers/usb/phy/phy-fsl-usb.c:1042:49: error: initialization of 'ssize_t (*)(struct device *, struct device_attribute *, char *)' {aka 'long int (*)(struct device *, struct device_attribute *, char *)'} from incompatible pointer type 'int (*)(struct device *, struct device_attribute *, char *)' [-Werror=incompatible-pointer-types]
static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL);
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: linux-usb@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
When handling split transactions we will try to delay retry after
getting a NAK from the device. This works well for BULK transfers that
can be polled for essentially forever. Unfortunately, on slower systems
at boot time, when the kernel is busy enumerating all the devices (USB
or not), we issue a bunch of control requests (reading device
descriptors, etc). If we get a NAK for the IN part of the control
request and delay retry for too long (because the system is busy), we
may confuse the device when we finally get to reissue SSPLIT/CSPLIT IN
and the device will respond with STALL. As a result we end up with
failure to get device descriptor and will fail to enumerate the device:
[ 3.428801] usb 2-1.2.1: new full-speed USB device number 9 using dwc2
[ 3.508576] usb 2-1.2.1: device descriptor read/8, error -32
[ 3.699150] usb 2-1.2.1: device descriptor read/8, error -32
[ 3.891653] usb 2-1.2.1: new full-speed USB device number 10 using dwc2
[ 3.968859] usb 2-1.2.1: device descriptor read/8, error -32
...
Let's not delay retries of split CONTROL IN transfers, as this allows us
to reliably enumerate devices at boot time.
Fixes: 38d2b5fb75c1 ("usb: dwc2: host: Don't retry NAKed transactions right away")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
The change protects almost the whole body of u_audio_iso_complete()
function by PCM stream lock, this is mainly sufficient to avoid a race
between USB request completion and stream termination, the change
prevents a possibility of invalid memory access in interrupt context
by memcpy():
Unable to handle kernel paging request at virtual address 00004e80
pgd = c0004000
[00004e80] *pgd=00000000
Internal error: Oops: 817 [#1] PREEMPT SMP ARM
CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G C 3.14.54+ #117
task: da180b80 ti: da192000 task.ti: da192000
PC is at memcpy+0x50/0x330
LR is at 0xcdd92b0e
pc : [<c029ef30>] lr : [<cdd92b0e>] psr: 20000193
sp : da193ce4 ip : dd86ae26 fp : 0000b180
r10: daf81680 r9 : 00000000 r8 : d58a01ea
r7 : 2c0b43e4 r6 : acdfb08b r5 : 01a271cf r4 : 87389377
r3 : 69469782 r2 : 00000020 r1 : daf82fe0 r0 : 00004e80
Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c5387d Table: 2b70804a DAC: 00000015
Process ksoftirqd/0 (pid: 3, stack limit = 0xda192238)
Also added a check for potential !runtime condition, commonly it is
done by PCM_RUNTIME_CHECK(substream) in the beginning, however this
does not completely prevent from oopses in u_audio_iso_complete(),
because the proper protection scheme must be implemented in PCM
library functions.
An example of *not fixed* oops due to substream->runtime->*
dereference by snd_pcm_running(substream) from
snd_pcm_period_elapsed(), where substream->runtime is gone while
waiting the substream lock:
Unable to handle kernel paging request at virtual address 6b6b6b6b
pgd = db7e4000
[6b6b6b6b] *pgd=00000000
CPU: 0 PID: 193 Comm: klogd Tainted: G C 3.14.54+ #118
task: db5ac500 ti: db60c000 task.ti: db60c000
PC is at snd_pcm_period_elapsed+0x48/0xd8 [snd_pcm]
LR is at snd_pcm_period_elapsed+0x40/0xd8 [snd_pcm]
pc : [<>] lr : [<>] psr: 60000193
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
Control: 10c5387d Table: 2b7e404a DAC: 00000015
Process klogd (pid: 193, stack limit = 0xdb60c238)
[<>] (snd_pcm_period_elapsed [snd_pcm]) from [<>] (udc_irq+0x500/0xbbc)
[<>] (udc_irq) from [<>] (ci_irq+0x280/0x304)
[<>] (ci_irq) from [<>] (handle_irq_event_percpu+0xa4/0x40c)
[<>] (handle_irq_event_percpu) from [<>] (handle_irq_event+0x3c/0x5c)
[<>] (handle_irq_event) from [<>] (handle_fasteoi_irq+0xc4/0x110)
[<>] (handle_fasteoi_irq) from [<>] (generic_handle_irq+0x20/0x30)
[<>] (generic_handle_irq) from [<>] (handle_IRQ+0x80/0xc0)
[<>] (handle_IRQ) from [<>] (gic_handle_irq+0x3c/0x60)
[<>] (gic_handle_irq) from [<>] (__irq_svc+0x44/0x78)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
[erosca: W/o this patch, with minimal instrumentation [1], I can
consistently reproduce BUG: KASAN: use-after-free [2]]
[1] Instrumentation to reproduce issue [2]:
diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
index a72295c953bb..bd0b308024fe 100644
--- a/drivers/usb/gadget/function/u_audio.c
+++ b/drivers/usb/gadget/function/u_audio.c
@@ -16,6 +16,7 @@
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
+#include <linux/delay.h>
#include "u_audio.h"
@@ -147,6 +148,8 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req)
spin_unlock_irqrestore(&prm->lock, flags);
+ udelay(500); //delay here to increase probability of parallel activities
+
/* Pack USB load in ALSA ring buffer */
pending = prm->dma_bytes - hw_ptr;
[2] After applying [1], below BUG occurs on Rcar-H3-Salvator-X board:
==================================================================
BUG: KASAN: use-after-free in u_audio_iso_complete+0x24c/0x520 [u_audio]
Read of size 8 at addr ffff8006cafcc248 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G WC 4.14.47+ #160
Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT)
Call trace:
[<ffff2000080925ac>] dump_backtrace+0x0/0x364
[<ffff200008092924>] show_stack+0x14/0x1c
[<ffff200008f8dbcc>] dump_stack+0x108/0x174
[<ffff2000083c71b8>] print_address_description+0x7c/0x32c
[<ffff2000083c78e8>] kasan_report+0x324/0x354
[<ffff2000083c6114>] __asan_load8+0x24/0x94
[<ffff2000021d1b34>] u_audio_iso_complete+0x24c/0x520 [u_audio]
[<ffff20000152fe50>] usb_gadget_giveback_request+0x480/0x4d0 [udc_core]
[<ffff200001860ab8>] usbhsg_queue_done+0x100/0x130 [renesas_usbhs]
[<ffff20000185f814>] usbhsf_pkt_handler+0x1a4/0x298 [renesas_usbhs]
[<ffff20000185fb38>] usbhsf_irq_ready+0x128/0x178 [renesas_usbhs]
[<ffff200001859cc8>] usbhs_interrupt+0x440/0x490 [renesas_usbhs]
[<ffff2000081a0288>] __handle_irq_event_percpu+0x594/0xa58
[<ffff2000081a07d0>] handle_irq_event_percpu+0x84/0x12c
[<ffff2000081a0928>] handle_irq_event+0xb0/0x10c
[<ffff2000081a8384>] handle_fasteoi_irq+0x1e0/0x2ec
[<ffff20000819e5f8>] generic_handle_irq+0x2c/0x44
[<ffff20000819f0d0>] __handle_domain_irq+0x190/0x194
[<ffff20000808177c>] gic_handle_irq+0x80/0xac
Exception stack(0xffff200009e97c80 to 0xffff200009e97dc0)
7c80: 0000000000000000 0000000000000000 0000000000000003 ffff200008179298
7ca0: ffff20000ae1c180 dfff200000000000 0000000000000000 ffff2000081f9a88
7cc0: ffff200009eb5960 ffff200009e97cf0 0000000000001600 ffff0400041b064b
7ce0: 0000000000000000 0000000000000002 0000000200000001 0000000000000001
7d00: ffff20000842197c 0000ffff958c4970 0000000000000000 ffff8006da0d5b80
7d20: ffff8006d4678498 0000000000000000 000000126bde0a8b ffff8006d4678480
7d40: 0000000000000000 000000126bdbea64 ffff200008fd0000 ffff8006fffff980
7d60: 00000000495f0018 ffff200009e97dc0 ffff200008b6c4ec ffff200009e97dc0
7d80: ffff200008b6c4f0 0000000020000145 ffff8006da0d5b80 ffff8006d4678498
7da0: ffffffffffffffff ffff8006d4678498 ffff200009e97dc0 ffff200008b6c4f0
[<ffff200008084034>] el1_irq+0xb4/0x12c
[<ffff200008b6c4f0>] cpuidle_enter_state+0x818/0x844
[<ffff200008b6c59c>] cpuidle_enter+0x18/0x20
[<ffff20000815f2e4>] call_cpuidle+0x98/0x9c
[<ffff20000815f674>] do_idle+0x214/0x264
[<ffff20000815facc>] cpu_startup_entry+0x20/0x24
[<ffff200008fb09d8>] rest_init+0x30c/0x320
[<ffff2000095f1338>] start_kernel+0x570/0x5b0
---<-snip->---
Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Substream period size potentially can be changed in runtime, however
this is not accounted in the data copying routine, the change replaces
the cached value with an actual value from substream runtime.
As a side effect the change also removes a potential division by zero
in u_audio_iso_complete() function, if there is a race with
uac_pcm_hw_free(), which sets prm->period_size to 0.
Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
There is no necessity to copy PCM stream ring buffer area and size
properties to UAC private data structure, these values can be got
from substream itself.
The change gives more control on substream and avoid stale caching.
Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
In u_audio_iso_complete, the runtime hw_ptr is updated before the
data is actually copied over to/from the buffer/dma area. When
ALSA uses this hw_ptr, the data may not actually be available to
be used. This causes trash/stale audio to play/record. This
patch updates the hw_ptr after the data has been copied to avoid
this.
Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Joshua Frkuska <joshua_frkuska@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Fix below smatch (v0.5.0-4443-g69e9094e11c1) warnings:
drivers/usb/gadget/function/u_audio.c:607 g_audio_setup() warn: strcpy() 'pcm_name' of unknown size might be too large for 'pcm->name'
drivers/usb/gadget/function/u_audio.c:614 g_audio_setup() warn: strcpy() 'card_name' of unknown size might be too large for 'card->driver'
drivers/usb/gadget/function/u_audio.c:615 g_audio_setup() warn: strcpy() 'card_name' of unknown size might be too large for 'card->shortname'
Below commits performed a similar 's/strcpy/strlcpy/' rework:
* v2.6.31 commit 8372d4980fbc ("ALSA: ctxfi - Fix PCM device naming")
* v4.14 commit 003d3e70dbeb ("ALSA: ad1848: fix format string overflow warning")
* v4.14 commit 6d8b04de87e1 ("ALSA: cs423x: fix format string overflow warning")
Fixes: eb9fecb9e69b ("usb: gadget: f_uac2: split out audio core")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
If usb_ep_autoconfig() fails (i.e. returns a null endpoint descriptor),
we expect afunc_bind() to fail (i.e. return a negative error code).
However, due to v4.10-rc1 commit f1d3861d63a5 ("usb: gadget: f_uac2: fix
error handling at afunc_bind"), afunc_bind() returns zero, telling the
caller that it succeeded. This then generates NULL pointer dereference
in below scenario on Rcar H3-ES20-Salvator-X target:
rcar-gen3:/home/root# modprobe g_audio
[ 626.521155] g_audio gadget: afunc_bind:565 Error!
[ 626.526319] g_audio gadget: Linux USB Audio Gadget, version: Feb 2, 2012
[ 626.533405] g_audio gadget: g_audio ready
rcar-gen3:/home/root#
rcar-gen3:/home/root# modprobe -r g_audio
[ 728.256707] ==================================================================
[ 728.264293] BUG: KASAN: null-ptr-deref in u_audio_stop_capture+0x70/0x268 [u_audio]
[ 728.272244] Read of size 8 at addr 00000000000000a0 by task modprobe/2545
[ 728.279309]
[ 728.280849] CPU: 0 PID: 2545 Comm: modprobe Tainted: G WC 4.14.47+ #152
[ 728.288778] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT)
[ 728.296454] Call trace:
[ 728.299151] [<ffff2000080925ac>] dump_backtrace+0x0/0x364
[ 728.304808] [<ffff200008092924>] show_stack+0x14/0x1c
[ 728.310081] [<ffff200008f8d5cc>] dump_stack+0x108/0x174
[ 728.315522] [<ffff2000083c77c8>] kasan_report+0x1fc/0x354
[ 728.321134] [<ffff2000083c611c>] __asan_load8+0x24/0x94
[ 728.326600] [<ffff2000021e1618>] u_audio_stop_capture+0x70/0x268 [u_audio]
[ 728.333735] [<ffff2000021f8b7c>] afunc_disable+0x44/0x60 [usb_f_uac2]
[ 728.340503] [<ffff20000218177c>] usb_remove_function+0x9c/0x210 [libcomposite]
[ 728.348060] [<ffff200002183320>] remove_config.isra.2+0x1d8/0x218 [libcomposite]
[ 728.355788] [<ffff200002186c54>] __composite_unbind+0x104/0x1f8 [libcomposite]
[ 728.363339] [<ffff200002186d58>] composite_unbind+0x10/0x18 [libcomposite]
[ 728.370536] [<ffff20000152f158>] usb_gadget_remove_driver+0xc0/0x170 [udc_core]
[ 728.378172] [<ffff20000153154c>] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core]
[ 728.386274] [<ffff200002180de8>] usb_composite_unregister+0x10/0x18 [libcomposite]
[ 728.394116] [<ffff2000021d035c>] audio_driver_exit+0x14/0x28 [g_audio]
[ 728.400878] [<ffff200008213ed4>] SyS_delete_module+0x288/0x32c
[ 728.406935] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000)
[ 728.413624] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8
[ 728.421718] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000
[ 728.429792] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005
[ 728.437870] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000
[ 728.445952] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0
[ 728.454035] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428
[ 728.462114] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000
[ 728.470190] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010
[ 728.478281] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a
[ 728.486351] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 728.494434] [<ffff200008084780>] el0_svc_naked+0x34/0x38
[ 728.499957] ==================================================================
[ 728.507801] Unable to handle kernel NULL pointer dereference at virtual address 000000a0
[ 728.517742] Mem abort info:
[ 728.520993] Exception class = DABT (current EL), IL = 32 bits
[ 728.527375] SET = 0, FnV = 0
[ 728.530731] EA = 0, S1PTW = 0
[ 728.534361] Data abort info:
[ 728.537650] ISV = 0, ISS = 0x00000006
[ 728.541863] CM = 0, WnR = 0
[ 728.545167] user pgtable: 4k pages, 48-bit VAs, pgd = ffff8006c6100000
[ 728.552156] [00000000000000a0] *pgd=0000000716a8d003
[ 728.557519] , *pud=00000007116fc003
[ 728.561259] , *pmd=0000000000000000
[ 728.564985] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 728.570815] Modules linked in:
[ 728.574023] usb_f_uac2
[ 728.576560] u_audio
[ 728.578827] g_audio(-)
[ 728.581361] libcomposite
[ 728.584071] configfs
[ 728.586428] aes_ce_blk
[ 728.588960] sata_rcar
[ 728.591421] crypto_simd
[ 728.594039] cryptd
[ 728.596217] libata
[ 728.598396] aes_ce_cipher
[ 728.601188] crc32_ce
[ 728.603542] ghash_ce
[ 728.605896] gf128mul
[ 728.608250] aes_arm64
[ 728.610692] scsi_mod
[ 728.613046] sha2_ce
[ 728.615313] xhci_plat_hcd
[ 728.618106] sha256_arm64
[ 728.620811] sha1_ce
[ 728.623077] renesas_usbhs
[ 728.625869] xhci_hcd
[ 728.628243] renesas_usb3
[ 728.630948] sha1_generic
[ 728.633670] ravb_streaming(C)
[ 728.636814] udc_core
[ 728.639168] cpufreq_dt
[ 728.641697] rcar_gen3_thermal
[ 728.644840] usb_dmac
[ 728.647194] pwm_rcar
[ 728.649548] thermal_sys
[ 728.652165] virt_dma
[ 728.654519] mch_core(C)
[ 728.657137] pwm_bl
[ 728.659315] snd_soc_rcar
[ 728.662020] snd_aloop
[ 728.664462] snd_soc_generic_card
[ 728.667869] snd_soc_ak4613
[ 728.670749] ipv6
[ 728.672768] autofs4
[ 728.675052] CPU: 0 PID: 2545 Comm: modprobe Tainted: G B WC 4.14.47+ #152
[ 728.682973] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT)
[ 728.690637] task: ffff8006ced38000 task.stack: ffff8006cf6c0000
[ 728.696814] PC is at u_audio_stop_capture+0x70/0x268 [u_audio]
[ 728.702896] LR is at u_audio_stop_capture+0x70/0x268 [u_audio]
[ 728.708964] pc : [<ffff2000021e1618>] lr : [<ffff2000021e1618>] pstate: 60000145
[ 728.716620] sp : ffff8006cf6c7a50
[ 728.720154] x29: ffff8006cf6c7a50
[ 728.723760] x28: ffff8006ced38000
[ 728.727272] x27: ffff200008fd7000
[ 728.730857] x26: ffff2000021d2340
[ 728.734361] x25: 0000000000000000
[ 728.737948] x24: ffff200009e94b08
[ 728.741452] x23: 00000000000000a0
[ 728.745052] x22: 00000000000000a8
[ 728.748558] x21: 1ffff000d9ed8f7c
[ 728.752142] x20: ffff8006d671a800
[ 728.755646] x19: 0000000000000000
[ 728.759231] x18: 0000000000000000
[ 728.762736] x17: 0000ffffbc7c8f40
[ 728.766320] x16: ffff200008213c4c
[ 728.769823] x15: 0000000000000000
[ 728.773408] x14: 0720072007200720
[ 728.776912] x13: 0720072007200720
[ 728.780497] x12: ffffffffffffffff
[ 728.784001] x11: 0000000000000040
[ 728.787598] x10: 0000000000001600
[ 728.791103] x9 : ffff8006cf6c77a0
[ 728.794689] x8 : ffff8006ced39660
[ 728.798193] x7 : ffff20000811c738
[ 728.801794] x6 : 0000000000000000
[ 728.805299] x5 : dfff200000000000
[ 728.808885] x4 : ffff8006ced38000
[ 728.812390] x3 : ffff200008fb46e8
[ 728.815976] x2 : 0000000000000007
[ 728.819480] x1 : 3ba68643e7431500
[ 728.823066] x0 : 0000000000000000
[ 728.826574] Process modprobe (pid: 2545, stack limit = 0xffff8006cf6c0000)
[ 728.833704] Call trace:
[ 728.836292] Exception stack(0xffff8006cf6c7910 to 0xffff8006cf6c7a50)
[ 728.842987] 7900: 0000000000000000 3ba68643e7431500
[ 728.851084] 7920: 0000000000000007 ffff200008fb46e8 ffff8006ced38000 dfff200000000000
[ 728.859173] 7940: 0000000000000000 ffff20000811c738 ffff8006ced39660 ffff8006cf6c77a0
[ 728.867248] 7960: 0000000000001600 0000000000000040 ffffffffffffffff 0720072007200720
[ 728.875323] 7980: 0720072007200720 0000000000000000 ffff200008213c4c 0000ffffbc7c8f40
[ 728.883412] 79a0: 0000000000000000 0000000000000000 ffff8006d671a800 1ffff000d9ed8f7c
[ 728.891485] 79c0: 00000000000000a8 00000000000000a0 ffff200009e94b08 0000000000000000
[ 728.899561] 79e0: ffff2000021d2340 ffff200008fd7000 ffff8006ced38000 ffff8006cf6c7a50
[ 728.907636] 7a00: ffff2000021e1618 ffff8006cf6c7a50 ffff2000021e1618 0000000060000145
[ 728.915710] 7a20: 0000000000000008 0000000000000000 0000ffffffffffff 3ba68643e7431500
[ 728.923780] 7a40: ffff8006cf6c7a50 ffff2000021e1618
[ 728.928880] [<ffff2000021e1618>] u_audio_stop_capture+0x70/0x268 [u_audio]
[ 728.936032] [<ffff2000021f8b7c>] afunc_disable+0x44/0x60 [usb_f_uac2]
[ 728.942822] [<ffff20000218177c>] usb_remove_function+0x9c/0x210 [libcomposite]
[ 728.950385] [<ffff200002183320>] remove_config.isra.2+0x1d8/0x218 [libcomposite]
[ 728.958134] [<ffff200002186c54>] __composite_unbind+0x104/0x1f8 [libcomposite]
[ 728.965689] [<ffff200002186d58>] composite_unbind+0x10/0x18 [libcomposite]
[ 728.972882] [<ffff20000152f158>] usb_gadget_remove_driver+0xc0/0x170 [udc_core]
[ 728.980522] [<ffff20000153154c>] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core]
[ 728.988638] [<ffff200002180de8>] usb_composite_unregister+0x10/0x18 [libcomposite]
[ 728.996472] [<ffff2000021d035c>] audio_driver_exit+0x14/0x28 [g_audio]
[ 729.003231] [<ffff200008213ed4>] SyS_delete_module+0x288/0x32c
[ 729.009278] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000)
[ 729.015946] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8
[ 729.024022] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000
[ 729.032099] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005
[ 729.040172] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000
[ 729.048263] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0
[ 729.056337] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428
[ 729.064411] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000
[ 729.072484] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010
[ 729.080563] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a
[ 729.088636] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 729.096733] [<ffff200008084780>] el0_svc_naked+0x34/0x38
[ 729.102259] Code: 9597d1b3 aa1703e0 9102a276 958792b9 (f9405275)
[ 729.108617] ---[ end trace 7560c5fa3d100243 ]---
After this patch is applied, the issue is fixed:
rcar-gen3:/home/root# modprobe g_audio
[ 59.217127] g_audio gadget: afunc_bind:565 Error!
[ 59.222329] g_audio ee020000.usb: failed to start g_audio: -19
modprobe: ERROR: could not insert 'g_audio': No such device
rcar-gen3:/home/root# modprobe -r g_audio
rcar-gen3:/home/root#
Fixes: f1d3861d63a5 ("usb: gadget: f_uac2: fix error handling at afunc_bind")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
r8a66597_queue()
The driver may sleep in an interrupt handler.
The function call path (from bottom to top) in Linux-4.16.7 is:
[FUNC] r8a66597_queue(GFP_KERNEL)
drivers/usb/gadget/udc/r8a66597-udc.c, 1193:
r8a66597_queue in get_status
drivers/usb/gadget/udc/r8a66597-udc.c, 1301:
get_status in setup_packet
drivers/usb/gadget/udc/r8a66597-udc.c, 1381:
setup_packet in irq_control_stage
drivers/usb/gadget/udc/r8a66597-udc.c, 1508:
irq_control_stage in r8a66597_irq (interrupt handler)
To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.
This bug is found by my static analysis tool (DSAC-2) and checked by
my code review.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
init_controller()
The driver may sleep with holding a spinlock.
The function call paths (from bottom to top) in Linux-4.16.7 are:
[FUNC] msleep
drivers/usb/gadget/udc/r8a66597-udc.c, 839:
msleep in init_controller
drivers/usb/gadget/udc/r8a66597-udc.c, 96:
init_controller in r8a66597_usb_disconnect
drivers/usb/gadget/udc/r8a66597-udc.c, 93:
spin_lock in r8a66597_usb_disconnect
[FUNC] msleep
drivers/usb/gadget/udc/r8a66597-udc.c, 835:
msleep in init_controller
drivers/usb/gadget/udc/r8a66597-udc.c, 96:
init_controller in r8a66597_usb_disconnect
drivers/usb/gadget/udc/r8a66597-udc.c, 93:
spin_lock in r8a66597_usb_disconnect
To fix these bugs, msleep() is replaced with mdelay().
This bug is found by my static analysis tool (DSAC-2) and checked by
my code review.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
The current code is broken as it re-defines "req" inside the
if block, then goto out of it. Thus the request that ends
up being sent is not the one that was populated by the
code in question.
This fixes RNDIS driver autodetect by Windows 10 for me.
The bug was introduced by Chris rework to remove the local
queuing inside the if { } block of the redefined request.
Fixes: 636ba13aec8a ("usb: gadget: composite: remove duplicated code in OS desc handling")
Cc: <stable@vger.kernel.org> # v4.17
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
A couple of bugs in the driver are preventing SETUP packets
with an OUT data phase from working properly.
Interestingly those are incredibly rare (RNDIS typically
uses them and thus is broken without this fix).
The main problem was an incorrect register offset being
applied for arming RX on EP0. The other problem relates
to stalling such a packet before the data phase, in which
case we don't get an ACK cycle, and get the next SETUP
packet directly, so we shouldn't reject it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Drop redundant input-speed re-encoding at every open(). The output and
input speeds are initialised to the same value and are kept in sync on
termios updates.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Drop unused driver-data baud rate.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Variables iflag, mask and serial are being assigned but are never used
hence are redundant and can be removed.
Cleans up clang warnings:
warning: variable 'iflag' set but not used [-Wunused-but-set-variable]
warning: variable 'mask' set but not used [-Wunused-but-set-variable]
warning: variable 'serial' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The device (a POS terminal) implements CDC ACM, but has not union
descriptor.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus
Peter writes:
One regression fix causes imx51 board hang when using ULPI PHY
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Variable maxpacket is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'maxpacket' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pointer dev is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'dev' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Variable num_ports is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'num_ports' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Variable t is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 't' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pointer dbc is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
variable 'dbc' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Variable 'selector' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'selector' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Variable modey is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'modey' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pointer usbdev is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'usbdev' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pointer ep is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'ep' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver was apparently never tested with an actual KLSI device. In
fact, even the device-id entry which was supposed to allow for this had
a typo in it.
Tests now reveal that the predicted firmware differences with the
PalmConnect adapters are real and that the driver does not support KLSI
devices with PID 0x000c, so let's remove the broken entry.
Reported-by: Chris Jakob <chris.jakob@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
At over 4000 #includes, <linux/platform_device.h> is the 9th most
#included header file in the Linux kernel. It does not need
<linux/mod_devicetable.h>, so drop that header and explicitly add
<linux/mod_devicetable.h> to source files that need it.
4146 #include <linux/platform_device.h>
After this patch, there are 225 files that use <linux/mod_devicetable.h>,
for a reduction of around 3900 times that <linux/mod_devicetable.h>
does not have to be read & parsed.
225 #include <linux/mod_devicetable.h>
This patch was build-tested on 20 different arch-es.
It also makes these drivers SubmitChecklist#1 compliant.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/
Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In general, accessing userspace memory beyond the length of the supplied
buffer in VFS read/write handlers can lead to both kernel memory corruption
(via kernel_read()/kernel_write(), which can e.g. be triggered via
sys_splice()) and privilege escalation inside userspace.
Fix it by using simple_read_from_buffer() instead of custom logic.
Fixes: 6bc235a2e24a ("USB: add driver for Meywa-Denki & Kayac YUREX")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds a condition check about the PLL acvice of this
controller. Otherwise, the controller might cause hang when
any USB clocks are not supplied yet and accesses the xHCI registers.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch simplifies getting the firmware name for R-Car Gen3.
Almost all R-Car Gen3 USB3.0 Host controllers use "V3". But,
r8a7795 ES1.x SoCs only should use "V2". Since the xhci-plat already
has the firmware_name of R-Car Gen3 as "V3", the xhci-rcar doesn't
need some members of rcar_quirks_match.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To clean up the xhci-rcar.c code later, this patch adds firmware_name
"V3" for R-Car Gen3.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
gcc-8 points out that the fix-byte buffer might be too small if
desc->mode is a three-digit number:
drivers/usb/typec/class.c: In function 'typec_register_altmode':
drivers/usb/typec/class.c:502:32: error: '%d' directive writing between 1 and 3 bytes into a region of size 2 [-Werror=format-overflow=]
sprintf(alt->group_name, "mode%d", desc->mode);
^~
drivers/usb/typec/class.c:502:27: note: directive argument in the range [0, 255]
sprintf(alt->group_name, "mode%d", desc->mode);
^~~~~~~~
drivers/usb/typec/class.c:502:2: note: 'sprintf' output between 6 and 8 bytes into a destination of size 6
sprintf(alt->group_name, "mode%d", desc->mode);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I assume this cannot happen in practice, but we can simply make the
string long enough to avoid the warning. This uses the two padding
bytes that already exist after the string.
Fixes: 4ab8c18d4d67 ("usb: typec: Register a device for every mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
One of the error handling paths forgets to unlock dp->lock on the error
exit path leading to a potential lock-up. Also the return path for a
successful call to the function configuration_store can return an
uninitialized error return code if dp->alt->active is false, so ensure
ret is zeroed on the successful exit path to avoid garbage being returned.
Detected by CoverityScan, CID#1471597 ("Unitialized scalar variable")
Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pointer adev is being dereferenced before it is being sanity
checked with a null pointer check, hence it is possible for
a null pointer dereference to occur. Fix this by dereferencing
adev only once it is null checked.
Detected by CoverityScan, CID#1471598 ("Dereference before null check")
Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The USB completion callback does not disable interrupts while acquiring
the lock. We want to remove the local_irq_disable() invocation from
__usb_hcd_giveback_urb() and therefore it is required for the callback
handler to disable the interrupts while acquiring the lock.
The callback may be invoked either in IRQ or BH context depending on the
USB host controller.
Use the _irqsave() variant of the locking primitives.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Corsair Strafe appears to suffer from the same issues
as the Corsair Strafe RGB.
Apply the same quirks (control message delay and init delay)
that the RGB version has to 1b1c:1b15.
With these quirks in place the keyboard works correctly upon
booting the system, and no longer requires reattaching the device.
Signed-off-by: Nico Sneck <snecknico@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The > should be >= here so that we don't read one element beyond the end
of the ep->stream_info->stream_rings[] array.
Fixes: e9df17eb1408 ("USB: xhci: Correct assumptions about number of rings per endpoint.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Without that option, we run into a link failure:
drivers/usb/gadget/udc/aspeed-vhub/hub.o: In function `ast_vhub_std_hub_request':
hub.c:(.text+0x5b0): undefined reference to `usb_gadget_get_string'
Fixes: 7ecca2a4080c ("usb/gadget: Add driver for Aspeed SoC virtual hub")
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
USB-serial fixes for v4.18-rc4
Here are three fixes for broken control-transfer error handling, which
could lead to uninitialised slab data leaking to user space.
Included is also a new device id for cp210x.
All but the final two patches have been in linux-next with no reported
issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add missing version-request error handling and suppress printing of the
(zeroed) transfer-buffer content in case of errors.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
