summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2022-10-27USB: serial: option: add Sierra Wireless EM9191Benoît Monin
Add support for the AT and diag ports, similar to other qualcomm SDX55 modems. In QDL mode, the modem uses a different device ID and support is provided by qcserial in commit 11c52d250b34 ("USB: serial: qcserial: add EM9191 QDL support"). T: Bus=08 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=1199 ProdID=90d3 Rev=00.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM9191 S: SerialNumber=xxxxxxxxxxxxxxxx C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) Signed-off-by: Benoît Monin <benoit.monin@gmx.fr> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-10-26usb: dwc3: gadget: Don't set IMI for no_interruptThinh Nguyen
The gadget driver may have a certain expectation of how the request completion flow should be from to its configuration. Make sure the controller driver respect that. That is, don't set IMI (Interrupt on Missed Isoc) when usb_request->no_interrupt is set. Also, the driver should only set IMI to the last TRB of a chain. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Jeff Vanhoof <jdv1029@gmail.com> Tested-by: Jeff Vanhoof <jdv1029@gmail.com> Link: https://lore.kernel.org/r/ced336c84434571340c07994e3667a0ee284fefe.1666735451.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26usb: dwc3: gadget: Stop processing more requests on IMIThinh Nguyen
When servicing a transfer completion event, the dwc3 driver will reclaim TRBs of started requests up to the request associated with the interrupt event. Currently we don't check for interrupt due to missed isoc, and the driver may attempt to reclaim TRBs beyond the associated event. This causes invalid memory access when the hardware still owns the TRB. If there's a missed isoc TRB with IMI (interrupt on missed isoc), make sure to stop servicing further. Note that only the last TRB of chained TRBs has its status updated with missed isoc. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable@vger.kernel.org Reported-by: Jeff Vanhoof <jdv1029@gmail.com> Reported-by: Dan Vacura <w36195@motorola.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Jeff Vanhoof <jdv1029@gmail.com> Tested-by: Jeff Vanhoof <jdv1029@gmail.com> Link: https://lore.kernel.org/r/b29acbeab531b666095dfdafd8cb5c7654fbb3e1.1666735451.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26Revert "usb: gadget: uvc: limit isoc_sg to super speed gadgets"Greg Kroah-Hartman
This reverts commit 19905240aef0181d1e6944070eb85fce75f75bcd. It was a new feature, and it doesn't even work properly yet, so revert it from this branch as it is not needed for 6.1-final. Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: stable <stable@kernel.org> Fixes: 19905240aef0 ("usb: gadget: uvc: limit isoc_sg to super speed gadgets") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25xhci: Remove device endpoints from bandwidth list when freeing the deviceMathias Nyman
Endpoints are normally deleted from the bandwidth list when they are dropped, before the virt device is freed. If xHC host is dying or being removed then the endpoints aren't dropped cleanly due to functions returning early to avoid interacting with a non-accessible host controller. So check and delete endpoints that are still on the bandwidth list when freeing the virt device. Solves a list_del corruption kernel crash when unbinding xhci-pci, caused by xhci_mem_cleanup() when it later tried to delete already freed endpoints from the bandwidth list. This only affects hosts that use software bandwidth checking, which currenty is only the xHC in intel Panther Point PCH (Ivy Bridge) Cc: stable@vger.kernel.org Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-5-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devicesMario Limonciello
For optimal power consumption of USB4 routers the XHCI PCIe endpoint used for tunneling must be in D3. Historically this is accomplished by a long list of PCIe IDs that correspond to these endpoints because the xhci_hcd driver will not default to allowing runtime PM for all devices. As both AMD and Intel have released new products with new XHCI controllers this list continues to grow. In reviewing the XHCI specification v1.2 on page 607 there is already a requirement that the PCI power management states D3hot and D3cold must be supported. In the quirk list, use this to indicate that runtime PM should be allowed on XHCI controllers. The following controllers are known to be xHC 1.2 and dropped explicitly: * AMD Yellow Carp * Intel Alder Lake * Intel Meteor Lake * Intel Raptor Lake [keep PCI ID for Alder Lake PCH for recently added quirk -Mathias] Cc: stable@vger.kernel.org Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-4-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25xhci: Add quirk to reset host back to default state at shutdownMathias Nyman
Systems based on Alder Lake P see significant boot time delay if boot firmware tries to control usb ports in unexpected link states. This is seen with self-powered usb devices that survive in U3 link suspended state over S5. A more generic solution to power off ports at shutdown was attempted in commit 83810f84ecf1 ("xhci: turn off port power in shutdown") but it caused regression. Add host specific XHCI_RESET_TO_DEFAULT quirk which will reset host and ports back to default state in shutdown. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-3-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controllerJens Glathe
This appears to fix the error: "xhci_hcd <address>; ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13" that appear spuriously (or pretty often) when using a r8152 USB3 ethernet adapter with integrated hub. ASM1042 reports as a 0.96 controller, but appears to behave more like 1.0 Inspired by this email thread: https://markmail.org/thread/7vzqbe7t6du6qsw3 Cc: stable@vger.kernel.org Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-2-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25usb: dwc3: st: Rely on child's compatible instead of namePatrice Chotard
To ensure that child node is found, don't rely on child's node name which can take different value, but on child's compatible name. Fixes: f5c5936d6b4d ("usb: dwc3: st: Fix node's child name") Cc: stable <stable@kernel.org> Cc: Jerome Audu <jerome.audu@st.com> Reported-by: Felipe Balbi <felipe@balbi.sh> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20220930142018.890535-1-patrice.chotard@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25usb: gadget: uvc: limit isoc_sg to super speed gadgetsMichael Grzeschik
The overhead of preparing sg data is high for transfers with limited payload. When transferring isoc over high-speed usb the maximum payload is rather small which is a good argument no to use sg. This patch is changing the uvc_video_encode_isoc_sg encode function only to be used for super speed gadgets. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20221017221141.3134818-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-24fbdev: sisfb: use explicitly signed charJason A. Donenfeld
With char becoming unsigned by default, and with `char` alone being ambiguous and based on architecture, signed chars need to be marked explicitly as such. This fixes warnings like: drivers/video/fbdev/sis/init301.c:3549 SiS_GetCRT2Data301() warn: 'SiS_Pr->SiS_EModeIDTable[ModeIdIndex]->ROMMODEIDX661' is unsigned Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Helge Deller <deller@gmx.de> Cc: linux-usb@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-10-23usb: chipidea: usbmisc: add power lost check for imx7ulpLi Jun
imx7ulp can shutdown domain power supply if none of peripheral in this domain is registered as wakeup source, this patch add related power lost check API. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-9-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: usbmisc: add power lost check for imx7dLi Jun
imx7d can shutdown domain power supply if none of peripheral in this domain is registered as wakeup source, this patch add related codes to check if power is lost. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-8-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: usbmisc: add power lost check for imx6sxLi Jun
imx6sx mega off can shutdown domain power supply if none of peripheral in this domain is registered as wakeup source, this patch add related codes to check if power is lost. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-7-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: usbmisc: group usbmisc operations for PMLi Jun
As there maybe more APIs of usbmisc for suspend and resume, group them into imx_usbmisc_suspend/resume. Besides, introduced .power_lost_check API, so that proper resume operations can be performed in power lost case. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-6-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: udc: add suspend/resume support for device controllerXu Yang
The controller's power may be powered off during system suspend. This will add suspend/resume support when the controller suffers power lost. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20221013151442.3262951-5-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: host: add suspend/resume support for host controllerXu Yang
The controller's power may be powered off during system suspend. This will add suspend/resume support when the controller suffers power lost. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-4-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: core: handle suspend/resume for each roleXu Yang
There may be a need to handle suspend/resume per role. This patch will add this support. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20221013151442.3262951-3-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: core: add controller resume support when controller is ↵Xu Yang
powered off For some SoCs, the controler's power will be off during the system suspend, and it needs some recovery operation to let the system back to workable. We add this support in this patch. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20221013151442.3262951-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: core: handle usb role switch in a common wayXu Yang
Currently, ci_usb_role_switch_set() may be called before system resume stage when suspended. Worse yet, ci_hdrc device may stay at RPM_ACTIVE state which will cause pm_runtime_get_sync() fail to resume the device. In this case, role-switch may unable to complete transition process due to not exit from lpm state or due to lack some means after system resume. Same as ci_cable_notifier(), usb_role_switch could handle its events based on ci_hdrc_cable mechanism. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20221009155336.766960-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: phy: generic: make vcc regulator optionalSascha Hauer
phy-generic uses the existance of the property "vcc-supply" to see if a regulator is optional or not. Use devm_regulator_get_optional() instead which exists for this purpose. Using devm_regulator_get_optional() avoids "supply vcc not found, using dummy regulator" messages. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20221012132754.292151-1-s.hauer@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22device property: Constify fwnode connection match APIsAndy Shevchenko
The fwnode and device parameters are not altered in the fwnode connection match APIs, constify them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lore.kernel.org/r/20221004092129.19412-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: dwc2: platform: Improve error reporting for problems during .remove()Uwe Kleine-König
Returning an error value in a platform driver's remove callback results in a generic error message being emitted by the driver core, but otherwise it doesn't make a difference. The device goes away anyhow. For each case where ret is non-zero the driver already emits an error message, so suppress the generic error message by returning zero unconditionally. (Side note: The return value handling was unreliable anyhow as the value returned by dwc2_exit_hibernation() was overwritten anyhow if hsotg->in_ppd was non-zero.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20221017195914.1426297-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: musb: remove unused davinci supportArnd Bergmann
The musb-davinci driver was only used on dm644x, which got removed in linux-6.0. The only remaining davinci machines are da8xx devicetree based and do not use this hardware. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20221019152947.3857217-6-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: typec: retimer: Use device type for matchingHeikki Krogerus
Device name is not reliable so using the type instead in retimer_fwnode_match(). This will also introduce is_typec_retimer() helper, and remove the static keyword from the retimer device type. That will make it accessible also in the main typec class. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221019145552.32493-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: gadget: uvc: default the ctrl request interface offsetsMichael Grzeschik
For the userspace it is needed to distinguish between requests for the control or streaming interface. The userspace would have to parse the configfs to know which interface index it has to compare the ctrl requests against. Since the interface numbers are not fixed, e.g. for composite gadgets, the interface offset depends on the setup. The kernel has this information when handing over the ctrl request to the userspace. This patch removes the offset from the interface numbers and expose the default interface defines in the uapi g_uvc.h. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20221011075348.1786897-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22USB: usbip: missing lock in stub downJose Ignacio Tornos Martinez
Missing lock in sysfs operation when we want to close the connection in order to check the status and send the down event in a safe way. Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20221003091016.641900-1-jtornosm@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22USB: host: Kconfig: Fix spelling mistake "firwmare" -> "firmware"Colin Ian King
There is a spelling mistake in a Kconfig description. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20221007203210.2756505-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: cdns3: adjust the partial logic of cdnsp_pci_removeDongliang Mu
In cdnsp_pci_remove, if pci_is_enabled returns true, it will call cdns_remove; else it will call kfree. Then both control flow goes to pci_dev_put. Adjust this logic by modifying it to an if else. Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn> Acked-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20221009072305.1593707-1-dzm91@hust.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usbip: convert sysfs snprintf to sysfs_emitXuezhi Zhang
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20221014110606.599352-1-zhangxuezhi3@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usbip: vudc: Convert snprintf() to sysfs_emit()Jules Irenge
Coccinnelle reports a warning Warning: Use scnprintf or sprintf Following the advice on kernel documentation https://www.kernel.org/doc/html/latest/filesystems/sysfs.html For show(device *...) functions we should only use sysfs_emit() or sysfs_emit_at() especially when formatting the value to be returned to user space. Convert snprintf() to sysfs_emit() Signed-off-by: Jules Irenge <jules.irenge@postgrad.manchester.ac.uk> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/YzhVIaNGdM33pcts@octinomon Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: ftdi-elan: remove variable err_countColin Ian King
Variable err_count is just being incremented and it's never used anywhere else. The variable and the increment are redundant so remove it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20221020130649.1546112-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: bdc: change state when port disconnectedJustin Chen
When port is connected and then disconnected, the state stays as configured. Which is incorrect as the port is no longer configured, but in a not attached state. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/1664997235-18198-1-git-send-email-justinpopo6@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: typec: ucsi: acpi: Implement resume callbackHeikki Krogerus
The ACPI driver needs to resume the interface by calling ucsi_resume(). Otherwise we may fail to detect connections and disconnections that happen while the system is suspended. Link: https://bugzilla.kernel.org/show_bug.cgi?id=210425 Fixes: a94ecde41f7e ("usb: typec: ucsi: ccg: enable runtime pm support") Cc: <stable@vger.kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221007100951.43798-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: typec: ucsi: Check the connection on resumeHeikki Krogerus
Checking the connection status of every port on resume. This fixes an issue where the partner device is not unregistered properly after resume if it was unplugged while the system was suspended. The function ucsi_check_connection() is also modified so that it can be used also for registering the connection on top of unregistering it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=210425 Fixes: a94ecde41f7e ("usb: typec: ucsi: ccg: enable runtime pm support") Cc: <stable@vger.kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221007100951.43798-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: gadget: aspeed: Fix probe regressionJoel Stanley
Since commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets"), the gadget devices are proper driver core devices, which caused each device to request pinmux settings: aspeed_vhub 1e6a0000.usb-vhub: Initialized virtual hub in USB2 mode aspeed-g5-pinctrl 1e6e2080.pinctrl: pin A7 already requested by 1e6a0000.usb-vhub; cannot claim for gadget.0 aspeed-g5-pinctrl 1e6e2080.pinctrl: pin-232 (gadget.0) status -22 aspeed-g5-pinctrl 1e6e2080.pinctrl: could not request pin 232 (A7) from group USB2AD on device aspeed-g5-pinctrl g_mass_storage gadget.0: Error applying setting, reverse things back The vhub driver has already claimed the pins, so prevent the gadgets from requesting them too by setting the magic of_node_reused flag. This causes the driver core to skip the mux request. Reported-by: Zev Weiss <zev@bewilderbeest.net> Reported-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Fixes: fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") Cc: stable@vger.kernel.org Signed-off-by: Joel Stanley <joel@jms.id.au> Tested-by: Zev Weiss <zev@bewilderbeest.net> Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Link: https://lore.kernel.org/r/20221017053006.358520-1-joel@jms.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: gadget: uvc: fix sg handling during video encodeJeff Vanhoof
In uvc_video_encode_isoc_sg, the uvc_request's sg list is incorrectly being populated leading to corrupt video being received by the remote end. When building the sg list the usage of buf->sg's 'dma_length' field is not correct and instead its 'length' field should be used. Fixes: e81e7f9a0eb9 ("usb: gadget: uvc: add scatter gather support") Cc: <stable@vger.kernel.org> Signed-off-by: Jeff Vanhoof <qjv001@motorola.com> Signed-off-by: Dan Vacura <w36195@motorola.com> Link: https://lore.kernel.org/r/20221018215044.765044-5-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: gadget: uvc: fix sg handling in error caseDan Vacura
If there is a transmission error the buffer will be returned too early, causing a memory fault as subsequent requests for that buffer are still queued up to be sent. Refactor the error handling to wait for the final request to come in before reporting back the buffer to userspace for all transfer types (bulk/isoc/isoc_sg). This ensures userspace knows if the frame was successfully sent. Fixes: e81e7f9a0eb9 ("usb: gadget: uvc: add scatter gather support") Cc: <stable@vger.kernel.org> Signed-off-by: Dan Vacura <w36195@motorola.com> Link: https://lore.kernel.org/r/20221018215044.765044-4-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: gadget: uvc: fix dropped frame after missed isocDan Vacura
With the re-use of the previous completion status in 0d1c407b1a749 ("usb: dwc3: gadget: Return proper request status") it could be possible that the next frame would also get dropped if the current frame has a missed isoc error. Ensure that an interrupt is requested for the start of a new frame. Fixes: fc78941d8169 ("usb: gadget: uvc: decrease the interrupt load to a quarter") Cc: <stable@vger.kernel.org> Signed-off-by: Dan Vacura <w36195@motorola.com> Link: https://lore.kernel.org/r/20221018215044.765044-2-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: dwc3: gadget: Don't delay End Transfer on delayed_statusThinh Nguyen
The gadget driver may wait on the request completion when it sets the USB_GADGET_DELAYED_STATUS. Make sure that the End Transfer command can go through if the dwc->delayed_status is set so that the request can complete. When the delayed_status is set, the Setup packet is already processed, and the next phase should be either Data or Status. It's unlikely that the host would cancel the control transfer and send a new Setup packet during End Transfer command. But if that's the case, we can try again when ep0state returns to EP0_SETUP_PHASE. Fixes: e1ee843488d5 ("usb: dwc3: gadget: Force sending delayed status during soft disconnect") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/3f9f59e5d74efcbaee444cf4b30ef639cc7b124e.1666146954.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: dwc3: Don't switch OTG -> peripheral if extcon is presentAndrey Smirnov
If the extcon device exists, get the mode from the extcon device. If the controller is DRD and the driver is unable to determine the mode, only then default the dr_mode to USB_DR_MODE_PERIPHERAL. Reported-by: Steev Klimaszewski <steev@kali.org> Fixes: 7a84e7353e23 ("Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"") Cc: stable <stable@kernel.org> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Steev Klimaszewski <steev@kali.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20221017233510.53336-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-20USB: make devnode() callback in usb_class_driver take a const *Greg Kroah-Hartman
With the changes to the driver core to make more pointers const, the USB subsystem also needs to be modified to take a const * for the devnode callback so that the driver core's constant pointer will also be properly propagated. Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Juergen Stuber <starblue@users.sourceforge.net> Reviewed-by: Johan Hovold <johan@kernel.org> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Link: https://lore.kernel.org/r/20221001165128.2688526-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-10Merge tag 'mm-stable-2022-10-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ...
2022-10-07Merge tag 'usb-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1. Nothing major in here, lots of little things with new devices supported and updates for a few drivers. Highlights include: - thunderbolt/USB4 devices supported a bit better than before, and some new ids to enable new hardware devices - USB gadget uvc updates for newer video formats and better v4l integration (the v4l portions were acked by those maintainers) - typec updates for tiny issues and more typec drivers for new chips. - xhci tiny updates for minor issues - big usb-serial ftdi_sio driver update to handle new devices better - lots of tiny dwc3 fixes and updates for the IP block that is showing up everywhere these days - dts updates for new devices being supported - other tiny janitorial and cleanups fixes for lots of different USB drivers. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: gadget: uvc: don't put item still in use usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video() usb: host: ehci-exynos: switch to using gpiod API Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present" Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"" dt-bindings: usb: Convert FOTG210 to dt schema usb: mtu3: fix failed runtime suspend in host only mode USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl" usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra usb: typec: Replace custom implementation of device_match_fwnode() usb: typec: ucsi: Don't warn on probe deferral usb: add quirks for Lenovo OneLink+ Dock MAINTAINERS: switch dwc3 to Thinh usb: idmouse: fix an uninit-value in idmouse_open USB: PHY: JZ4770: Switch to use dev_err_probe() helper usb: phy: generic: Switch to use dev_err_probe() helper usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs usb: cdns3: remove dead code usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair usb: musb: sunxi: Switch to use dev_err_probe() helper ...
2022-10-07Merge tag 'tty-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...
2022-10-07Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr, mpt3sas, target). The biggest change (from my biased viewpoint) being that the mpi3mr now attached to the SAS transport class, making it the first fusion type device to do so. Beyond the usual bug fixing and security class reworks, there aren't a huge number of core changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername() scsi: mpi3mr: Remove unnecessary cast scsi: stex: Properly zero out the passthrough command structure scsi: mpi3mr: Update driver version to 8.2.0.3.0 scsi: mpi3mr: Fix scheduling while atomic type bug scsi: mpi3mr: Scan the devices during resume time scsi: mpi3mr: Free enclosure objects during driver unload scsi: mpi3mr: Handle 0xF003 Fault Code scsi: mpi3mr: Graceful handling of surprise removal of PCIe HBA scsi: mpi3mr: Schedule IRQ kthreads only on non-RT kernels scsi: mpi3mr: Support new power management framework scsi: mpi3mr: Update mpi3 header files scsi: mpt3sas: Revert "scsi: mpt3sas: Fix ioc->base_readl() use" scsi: mpt3sas: Revert "scsi: mpt3sas: Fix writel() use" scsi: wd33c93: Remove dead code related to the long-gone config WD33C93_PIO scsi: core: Add I/O timeout count for SCSI device scsi: qedf: Populate sysfs attributes for vport scsi: pm8001: Replace one-element array with flexible-array member scsi: 3w-xxxx: Replace one-element array with flexible-array member scsi: hptiop: Replace one-element array with flexible-array member in struct hpt_iop_request_ioctl_command() ...
2022-10-05Merge tag 'sound-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The majority of changes are ASoC drivers (SOF, Intel, AMD, Mediatek, Qualcomm, TI, Apple Silicon, etc), while we see a few small fixes in ALSA / ASoC core side, too. Here are highlights: Core: - A new string helper parse_int_array_user() and cleanups with it - Continued cleanup of memory allocation helpers - PCM core optimization and hardening - Continued ASoC core code cleanups ASoC: - Improvements to the SOF IPC4 code, especially around trace - Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silicon systems, Everest ES8326, Intel Sky Lake and Kaby Lake, Mediatek MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450 and Texas Instruments SRC4392 HD- and USB-audio: - Cleanups for unification of hda-ext bus - HD-audio HDMI codec driver cleanups - Continued endpoint management fixes for USB-audio - New quirks as usual" * tag 'sound-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (422 commits) ALSA: hda: Fix position reporting on Poulsbo ALSA: hda/hdmi: Don't skip notification handling during PM operation ASoC: rockchip: i2s: use regmap_read_poll_timeout_atomic to poll I2S_CLR ASoC: dt-bindings: Document audio OF graph dai-tdm-slot-num dai-tdm-slot-width props ASoC: qcom: fix unmet direct dependencies for SND_SOC_QDSP6 ALSA: usb-audio: Fix potential memory leaks ALSA: usb-audio: Fix NULL dererence at error path ASoC: mediatek: mt8192-mt6359: Set the driver name for the card ALSA: hda/realtek: More robust component matching for CS35L41 ASoC: Intel: sof_rt5682: remove SOF_RT1015_SPEAKER_AMP_100FS flag ASoC: nau8825: Add TDM support ASoC: core: clarify the driver name initialization ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe ASoC: wcd-mbhc-v2: Revert "ASoC: wcd-mbhc-v2: use pm_runtime_resume_and_get()" ASoC: mediatek: mt8186: Fix spelling mistake "slect" -> "select" ALSA: hda/realtek: Add quirk for HP Zbook Firefly 14 G9 model ALSA: asihpi - Remove unused struct hpi_subsys_response ...
2022-10-04Merge tag 'i2c-for-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - 'remove' callback converted to return void. Big change with trivial fixes all over the tree. Other subsystems depending on this change have been asked to pull an immutable topic branch for this. - new driver for Microchip PCI1xxxx switch - heavy refactoring of the Mellanox BlueField driver - we prefer async probe in the i801 driver now - the rest is usual driver updates (support for more SoCs, some refactoring, some feature additions) * tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: pci1xxxx: prevent signed integer overflow i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper i2c: i801: Prefer async probe i2c: designware-pci: Use standard pattern for memory allocation i2c: designware-pci: Group AMD NAVI quirk parts together i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED i2c: mlxbf: remove device tree support i2c: mlxbf: support BlueField-3 SoC i2c: cadence: Add standard bus recovery support i2c: mlxbf: add multi slave functionality i2c: mlxbf: support lock mechanism macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change i2c: riic: Use devm_platform_ioremap_resource() i2c: mlxbf: remove IRQF_ONESHOT dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support i2c: tegra: Add GPCDMA support i2c: scmi: Convert to be a platform driver i2c: rk3x: Add rv1126 support ...
2022-10-03kmsan: handle memory sent to/from USBAlexander Potapenko
Depending on the value of is_out kmsan_handle_urb() KMSAN either marks the data copied to the kernel from a USB device as initialized, or checks the data sent to the device for being initialized. Link: https://lkml.kernel.org/r/20220915150417.722975-24-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-03Merge tag 'acpi-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "ACPI and PNP updates for 6.1-rc1. These rearrange the ACPI device object initialization code (to get rid of a redundant parent pointer from struct acpi_device among other things), unify the _UID handling, drop support for some _OSI strings that should not be necessary any more, add new IDs to support more hardware and some more quirks, fix a few issues and clean up code all over. Specifics: - Reimplement acpi_get_pci_dev() using the list of physical devices associated with the given ACPI device object (Rafael Wysocki) - Rename ACPI device object reference counting functions (Rafael Wysocki) - Rearrange ACPI device object initialization code (Rafael Wysocki) - Drop parent field from struct acpi_device (Rafael Wysocki) - Extend the the int3472-tps68470 driver to support multiple consumers of a single TPS68470 along with the requisite framework-level support (Daniel Scally) - Filter out non-memory resources in is_memory(), add a helper function to find all memory type resources of an ACPI device object and use that function in 3 places (Heikki Krogerus) - Add IRQ override quirks for Asus Vivobook K3402ZA/K3502ZA and ASUS model S5402ZA (Tamim Khan, Kellen Renshaw) - Fix acpi_dev_state_d0() kerneldoc (Sakari Ailus) - Fix up suspend-to-idle support on ASUS Rembrandt laptops (Mario Limonciello) - Clean up ACPI platform devices support code (Andy Shevchenko, John Garry) - Clean up ACPI bus management code (Andy Shevchenko, ye xingchen) - Add support for multiple DMA windows with different offsets to the ACPI device enumeration code and use it on LoongArch (Jianmin Lv) - Clean up the ACPI LPSS (Intel SoC) driver (Andy Shevchenko) - Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable (Mario Limonciello) - Drop unused dev_fmt() and redundant 'HMAT' prefix from the HMAT parsing code (Liu Shixin) - Make ACPI FPDT parsing code avoid calling acpi_os_map_memory() on invalid physical addresses (Hans de Goede) - Silence missing-declarations warning related to Apple device properties management (Lukas Wunner) - Disable frequency invariance in the CPPC library if registers used by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton) - Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan) - Fix Tx acknowledge in the PCC address space handler (Huisong Li) - Use wait_for_completion_timeout() for PCC mailbox operations (Huisong Li) - Release resources on PCC address space setup failure path (Rafael Mendonca) - Remove unneeded result variables from APEI code (ye xingchen) - Print total number of records found during BERT log parsing (Dmitry Monakhov) - Drop support for 3 _OSI strings that should not be necessary any more and update documentation on custom _OSI strings so that adding new ones is not encouraged any more (Mario Limonciello) - Drop unneeded result variable from ec_write() (ye xingchen) - Remove the leftover struct acpi_ac_bl from the ACPI AC driver (Hanjun Guo) - Reorder symbols to get rid of a few forward declarations in the ACPI fan driver (Uwe Kleine-König) - Add Toshiba Satellite/Portege Z830 ACPI backlight quirk (Arvid Norlander) - Add ARM DMA-330 controller to the supported list in the ACPI AMBA driver (Vijayenthiran Subramaniam) - Drop references to non-functional 01.org/linux-acpi web site from MAINTAINERS and Kconfig help texts (Rafael Wysocki) - Replace strlcpy() with unused retval with strscpy() in the ACPI support code (Wolfram Sang) - Do not initialize ret in main() in the pfrut utility (Shi junming) - Drop useless ACPI DSDT override documentation (Rafael Wysocki) - Fix a few typos and wording mistakes in the ACPI device enumeration documentation (Jean Delvare) - Introduce acpi_dev_uid_to_integer() to convert a _UID string into an integer value (Andy Shevchenko) - Use acpi_dev_uid_to_integer() in several places to unify _UID handling (Andy Shevchenko) - Drop unused pnpid32_to_pnpid() declaration from PNP code (Gaosheng Cui)" * tag 'acpi-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (79 commits) ACPI: LPSS: Deduplicate skipping device in acpi_lpss_create_device() ACPI: LPSS: Replace loop with first entry retrieval ACPI: x86: s2idle: Add another ID to s2idle_dmi_table ACPI: x86: s2idle: Fix a NULL pointer dereference MAINTAINERS: Drop records pointing to 01.org/linux-acpi ACPI: Kconfig: Drop link to https://01.org/linux-acpi ACPI: docs: Drop useless DSDT override documentation ACPI: DPTF: Drop stale link from Kconfig help ACPI: x86: s2idle: Add a quirk for ASUSTeK COMPUTER INC. ROG Flow X13 ACPI: x86: s2idle: Add a quirk for Lenovo Slim 7 Pro 14ARH7 ACPI: x86: s2idle: Add a quirk for ASUS ROG Zephyrus G14 ACPI: x86: s2idle: Add a quirk for ASUS TUF Gaming A17 FA707RE ACPI: x86: s2idle: Add module parameter to prefer Microsoft GUID ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt ACPI: x86: s2idle: Move _HID handling for AMD systems into structures platform/x86: int3472: Add board data for Surface Go2 IR camera platform/x86: int3472: Support multiple gpio lookups in board data platform/x86: int3472: Support multiple clock consumers ACPI: bus: Add iterator for dependent devices ACPI: scan: Add acpi_dev_get_next_consumer_dev() ...
generated by cgit (git 2.34.1) at 2025-09-11 22:57:47 +0000