summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2022-02-17xhci: dbc: refactor xhci_dbc_init()Mathias Nyman
Refactor xhci_dbc_init(), splitting it into logical parts closer to the Linux device model. - Create the fake dbc device, depends on xhci strucure - Allocate a dbc structure, xhci agnostic - Call xhci_dbc_tty_probe(), similar to actual probe. Adjustments to xhci_dbc_exit and xhci_dbc_remove are also needed as a result to the xhci_dbc_init() changes Mostly non-functional changes, except for creating the dbc sysfs entry earlier, together with the dbc structure. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220216095153.1303105-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17usb: dwc3: drd: Don't check against CONFIG_OFThinh Nguyen
The CONFIG_OF maybe set, but it may not be applicable to a device. In such case, checking against that can cause the device fail to initialize. Check against the device node (device->of_node) instead. Fixes: a102f07e4edf ("usb: dwc3: drd: Add support for usb-conn-gpio based usb-role-switch") Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/9f15580ad5810b1e5f31c241b35ebedfbfc30a3f.1644964864.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17usb: host: xhci-mtk: Simplify supplies handling with regulator_bulkAngeloGioacchino Del Regno
Remove the custom functions xhci_mtk_ldos_{enable,disable}() by switching to using regulator_bulk to perform the very same thing, as the regulators are always either both enabled or both disabled. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220214111905.77903-1-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17usb: dwc2: drd: fix soft connect when gadget is unconfiguredFabrice Gasnier
When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so the HOST tries to enumerate it. At the host side, this can result in a stuck USB port or worse. When getting lucky, some dmesg can be observed at the host side: new high-speed USB device number ... device descriptor read/64, error -110 Fix it in drd, by checking the enabled flag before calling dwc2_hsotg_core_connect(). It will be called later, once configured, by the normal flow: - udc_bind_to_driver - usb_gadget_connect - dwc2_hsotg_pullup - dwc2_hsotg_core_connect Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Cc: stable <stable@vger.kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1644999135-13478-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17usb: dwc3: pci: Fix Bay Trail phy GPIO mappingsHans de Goede
When the Bay Trail phy GPIO mappings where added cs and reset were swapped, this did not cause any issues sofar, because sofar they were always driven high/low at the same time. Note the new mapping has been verified both in /sys/kernel/debug/gpio output on Android factory images on multiple devices, as well as in the schematics for some devices. Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources") Cc: stable <stable@vger.kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220213130524.18748-3-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17tps6598x: clear int mask on probe failureJens Axboe
The interrupt mask is enabled before any potential failure points in the driver, which can leave a failure path where we exit with interrupts enabled but the device not live. This causes an infinite stream of interrupts on an Apple M1 Pro laptop on USB-C. Add a failure label that's used post enabling interrupts, where we mask them again before returning an error. Suggested-by: Sven Peter <sven@svenpeter.dev> Cc: stable <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/e6b80669-20f3-06e7-9ed5-8951a9c6db6f@kernel.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-15xhci: Prevent futile URB re-submissions due to incorrect return value.Hongyu Xie
The -ENODEV return value from xhci_check_args() is incorrectly changed to -EINVAL in a couple places before propagated further. xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0. xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if the return value of xhci_check_args <= 0. This causes problems for example r8152_submit_rx, calling usb_submit_urb in drivers/net/usb/r8152.c. r8152_submit_rx will never get -ENODEV after submiting an urb when xHC is halted because xhci_urb_enqueue returns -EINVAL in the very beginning. [commit message and header edit -Mathias] Fixes: 203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.") Cc: stable@vger.kernel.org Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220215123320.1253947-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-15xhci: re-initialize the HC during resume if HCE was setPuma Hsu
When HCE(Host Controller Error) is set, it means an internal error condition has been detected. Software needs to re-initialize the HC, so add this check in xhci resume. Cc: stable@vger.kernel.org Signed-off-by: Puma Hsu <pumahsu@google.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220215123320.1253947-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-15usb: dwc3: pci: Add "snps,dis_u2_susphy_quirk" for Intel Bay TrailHans de Goede
Commit e0082698b689 ("usb: dwc3: ulpi: conditionally resume ULPI PHY") fixed an issue where ULPI transfers would timeout if any requests where send to the phy sometime after init, giving it enough time to auto-suspend. Commit e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression") changed the behavior to instead of clearing the DWC3_GUSB2PHYCFG_SUSPHY bit, add an extra sleep when it is set. But on Bay Trail devices, when phy_set_mode() gets called during init, this leads to errors like these: [ 28.451522] tusb1210 dwc3.ulpi: error -110 writing val 0x01 to reg 0x0a [ 28.464089] tusb1210 dwc3.ulpi: error -110 writing val 0x01 to reg 0x0a Add "snps,dis_u2_susphy_quirk" to the settings for Bay Trail devices to fix this. This restores the old behavior for Bay Trail devices, since previously the DWC3_GUSB2PHYCFG_SUSPHY bit would get cleared on the first ulpi_read/_write() and then was never set again. Fixes: e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression") Cc: stable@kernel.org Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220213130524.18748-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-15usb: dwc3: pci: add support for the Intel Raptor Lake-SHeikki Krogerus
This patch adds the necessary PCI ID for Intel Raptor Lake-S devices. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220214141948.18637-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-15usb: host: ehci-platform: Update brcm, xgs-iproc-ehci workaroundChris Packham
The original workaround was added prior to commit e4788edc730a ("USB: EHCI: Add alias for Broadcom INSNREG"). Now that brcm_insnreg exists in struct ehci_regs we can use that instead of having a local definition. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20220215000813.1779032-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-15usb: host: {e|o}hci-dbg: kill useless 'ret' variable initializersSergey Shtylyov
The 'ret' local variables are often initialized to 0 but this value is unused, thus we can kill those initializers... Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/901b7478-45b6-d8b3-f5c6-555712485232@omp.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-14usbip: vudc: Make use of the helper macro LIST_HEAD()Cai Huoqing
Replace "struct list_head head = LIST_HEAD_INIT(head)" with "LIST_HEAD(head)" to simplify the code. LIST_HEAD() helps to clean up the code "struct list_head vudc_devices =", only to care about the variable 'vudc_devices'. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Link: https://lore.kernel.org/r/20220211012807.7415-1-cai.huoqing@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-14usb: ulpi: Add debugfs supportSean Anderson
This adds a debugfs file for ULPI devices which contains a dump of their registers. This is useful for debugging basic connectivity problems. The file is created in ulpi_register because many devices will never have a driver bound (as they are managed in hardware by the USB controller device). The root directory of this subsystem is created before we register the bus to ensure that devices can always create their directories. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220127190004.1446909-4-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-14Merge 5.17-rc4 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-12Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"Greg Kroah-Hartman
This reverts commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87. It causes build errors as reported by the kernel test robot. Link: https://lore.kernel.org/r/202202112236.AwoOTtHO-lkp@intel.com Reported-by: kernel test robot <lkp@intel.com> Fixes: 269cbcf7b72d ("usb: dwc2: drd: fix soft connect when gadget is unconfigured") Cc: stable@kernel.org Cc: Amelie Delaunay <amelie.delaunay@foss.st.com> Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-11Merge tag 'usb-serial-5.17-rc4' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.17-rc4 Here are some new device ids for 5.17-rc4. All have been in linux-next with no reported issues. * tag 'usb-serial-5.17-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: cp210x: add CPI Bulk Coin Recycler id USB: serial: cp210x: add NCR Retail IO box id USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320 USB: serial: option: add ZTE MF286D modem USB: serial: ch341: add support for GW Instek USB2.0-Serial devices
2022-02-11usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)Souradeep Chowdhury
Add support for control peripheral of EUD (Embedded USB Debugger) to listen to events such as USB attach/detach, pet EUD to indicate software is functional.Reusing the platform device kobj, sysfs entry 'enable' is created to enable or disable EUD. To enable the eud the following needs to be done echo 1 > /sys/bus/platform/.../enable To disable eud, following is the command echo 0 > /sys/bus/platform/.../enable Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com> Link: https://lore.kernel.org/r/0ac5c2b2c8e4ce4f4f342a08b48cfc61aeaf7ee8.1644339918.git.quic_schowdhu@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-11usb: typec: rt1719: Add support for Richtek RT1719ChiYuan Huang
Richtek RT1719 is a sink-only Type-C PD controller it complies with latest USB Type-C and PD standards. It integrates the physical layer of USB power delivery protocol to allow up to 100W of power. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1644421362-32104-3-git-send-email-u0084500@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-11usb: xhci-mtk: add support ip-sleep wakeup for mt8195Chunfeng Yun
Add support ip-sleep wakeup for mt8195, it's a specific revision for each USB controller, and not following IPM rule. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220128062902.26273-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-11usb: dwc2: Add platform specific data for Intel's AgilexDinh Nguyen
The DWC2 IP on the Agilex platform does not support clock-gating. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20220125161821.1951906-2-dinguyen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-11USB: usbfs: Use a spinlock instead of atomic accesses to tally used memory.Ingo Rohloff
While the existing code code imposes a limit on the used memory, it might be over pessimistic (even if this is unlikely). Example scenario: 8 threads running in parallel, all entering "usbfs_increase_memory_usage()" at the same time. The atomic accesses in "usbfs_increase_memory_usage()" could be serialized like this: 8 x "atomic64_add" 8 x "atomic64_read" If the 8 x "atomic64_add" raise "usbfs_memory_usage" above the limit, then all 8 calls of "usbfs_increase_memory_usage()" will return with -ENOMEM. If you instead serialize over the whole access to "usbfs_memory_usage" by using a spinlock, some of these calls will succeed. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ingo Rohloff <ingo.rohloff@lauterbach.com> Link: https://lore.kernel.org/r/20220209123303.103340-2-ingo.rohloff@lauterbach.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-11usb: dwc2: drd: fix soft connect when gadget is unconfiguredFabrice Gasnier
When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so the HOST tries to enumerate it. At the host side, this can result in a stuck USB port or worse. When getting lucky, some dmesg can be observed at the host side: new high-speed USB device number ... device descriptor read/64, error -110 Fix it in drd, by checking the enabled flag before calling dwc2_hsotg_core_connect(). It will be called later, once configured, by the normal flow: - udc_bind_to_driver - usb_gadget_connect - dwc2_hsotg_pullup - dwc2_hsotg_core_connect Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Cc: stable@kernel.org Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1644423353-17859-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-11usb: gadget: rndis: check size of RNDIS_MSG_SET commandGreg Kroah-Hartman
Check the size of the RNDIS_MSG_SET command given to us before attempting to respond to an invalid message size. Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com> Cc: stable@kernel.org Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-11USB: gadget: validate interface OS descriptor requestsSzymon Heidrich
Stall the control endpoint in case provided index exceeds array size of MAX_CONFIG_INTERFACES or when the retrieved function pointer is null. Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-11usb: core: Unregister device on component_add() failureFabio M. De Francesco
Commit 8c67d06f3fd9 ("usb: Link the ports to the connectors they are attached to") creates a link to the USB Type-C connector for every new port that is added when possible. If component_add() fails, usb_hub_create_port_device() prints a warning but does not unregister the device and does not return errors to the callers. Syzbot reported a "WARNING in component_del()". Fix this issue in usb_hub_create_port_device by calling device_unregister() and returning the errors from component_add(). Fixes: 8c67d06f3fd9 ("usb: Link the ports to the connectors they are attached to") Reported-and-tested-by: syzbot+60df062e1c41940cae0f@syzkaller.appspotmail.com Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Link: https://lore.kernel.org/r/20220209164500.8769-1-fmdefrancesco@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-09spi: make remove callback a void functionUwe Kleine-König
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-08usb: ehci: add pci device support for Aspeed platformsNeal Liu
Enable Aspeed quirks in commit 7f2d73788d90 ("usb: ehci: handshake CMD_RUN instead of STS_HALT") to support Aspeed ehci-pci device. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Link: https://lore.kernel.org/r/20220208101657.76459-1-neal_liu@aspeedtech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08usb: dwc3: gadget: Prevent core from processing stale TRBsUdipto Goswami
With CPU re-ordering on write instructions, there might be a chance that the HWO is set before the TRB is updated with the new mapped buffer address. And in the case where core is processing a list of TRBs it is possible that it fetched the TRBs when the HWO is set but before the buffer address is updated. Prevent this by adding a memory barrier before the HWO is updated to ensure that the core always process the updated TRBs. Fixes: f6bafc6a1c9d ("usb: dwc3: convert TRBs into bitshifts") Cc: stable <stable@vger.kernel.org> Reviewed-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com> Link: https://lore.kernel.org/r/1644207958-18287-1-git-send-email-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08usb: dwc3: Program GFLADJSean Anderson
GUCTL.REFCLKPER can only account for clock frequencies with integer periods. To address this, program REFCLK_FLADJ with the relative error caused by period truncation. The formula given in the register reference has been rearranged to allow calculation based on rate (instead of period), and to allow for fixed-point arithmetic. Additionally, calculate a value for 240MHZDECR. This configures a simulated 240Mhz clock using a counter with one fractional bit (PLS1). This register is programmed only for versions >= 2.50a, since this is the check also used by commit db2be4e9e30c ("usb: dwc3: Add frame length adjustment quirk"). Tested-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127200636.1456175-5-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08usb: dwc3: Calculate REFCLKPER based on reference clockSean Anderson
Instead of using a special property to determine the reference clock period, use the rate of the reference clock. When we have a legacy snps,ref-clock-period-ns property and no reference clock, use it instead. Fractional clocks are not currently supported, and will be dealt with in the next commit. Tested-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127200636.1456175-4-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08usb: dwc3: Get clocks individuallySean Anderson
Instead of grabbing all clocks in bulk, grab them individually. This will allow us to get the frequency or otherwise deal with discrete clocks. This may break some platforms if they use a clock which doesn't use one of the documented names. Reviewed-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127200636.1456175-3-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-07scsi: usb: storage: Complete the SCSI request directlySebastian Andrzej Siewior
The USB storage driver can complete its requests directly from a kernel thread. Use scsi_done_direct() to avoid waking ksoftirqd. Link: https://lore.kernel.org/r/20220201210954.570896-3-sebastian@breakpoint.cc Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-04usb: gadget: f_uac2: Neaten and reduce size of afunc_validate_optsJoe Perches
Remove the repetition and reduce the object size a bit. $ size drivers/usb/gadget/function/f_uac2.o* (x86-64 defconfig with gadget) text data bss dec hex filename 24515 3136 16 27667 6c13 drivers/usb/gadget/function/f_uac2.o.new 24817 3136 16 27969 6d41 drivers/usb/gadget/function/f_uac2.o.old Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/2132d97ca8d4dd5ac9426cc23af95e819079b02c.camel@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04usb: gadget: f_uac2: change maxpctksize/maxpcktsize to wMaxPacketSizeColin Ian King
The spelling of maxpctksize and maxpcktsize is inconsistent, rename them both to wMaxPacketSize instead. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220202104058.590312-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01USB: serial: cp210x: add CPI Bulk Coin Recycler idJohan Hovold
Add the device id for the Crane Payment Innovation / Money Controls Bulk Coin Recycler: https://www.cranepi.com/en/system/files/Support/OM_BCR_EN_V1-04_0.pdf Reported-by: Scott Russell <Scott.Russell2@ncr.com> Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2022-02-01USB: serial: cp210x: add NCR Retail IO box idJohan Hovold
Add the device id for NCR's Retail IO box (CP2105) used in NCR FastLane SelfServ Checkout - R6C: https://www.ncr.com/product-catalog/ncr-fastlane-selfserv-checkout-r6c Reported-by: Scott Russell <Scott.Russell2@ncr.com> Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2022-02-01USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320Cameron Williams
This patch adds support for the Brainboxes US-159, US-235 and US-320 USB-to-Serial devices. Signed-off-by: Cameron Williams <cang1@live.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-01-31usb: gadget: f_uac2: Add speed names to bInterval dbg/warnPavel Hofman
Add speed names for better clarity of dgb/warn messages from max packet size/bInterval checks. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220127114331.41367-5-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: gadget: f_uac2: Optionally determine bInterval for HS and SSPavel Hofman
Allow setting configfs params p_hs_bint/c_hs_bint to 0. If they are set to 0, determine the largest bInterval (4 to 1) for which the required bandwidth of the max samplerate fits the max allowed packet size. If the required bandwidth exceeds max bandwidth for single-packet mode (ep->mc=1), keep bInterval at 1. The FS speed is left at fixed bInterval=1. If for any speed the required bandwidth exceeds the max bandwidth corresponding to the selected/determined bInterval, print a warning. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220127114331.41367-4-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: gadget: audio: Add HS/SS bInterval params for UAC2Pavel Hofman
Allow configuring the existing f_uac2 configfs bInterval params through parameters of the gaudio module. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220127114331.41367-3-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: gadget: f_uac2: Add HS/SS bInterval to configfsPavel Hofman
Allow configuring the HS/SS bInterval through configfs, via parameters p_hs_bint/c_hs_bint separately for playback/capture. The default param values are left at the original 4. Suggested-by: John Keeping <john@metanate.com> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220127114331.41367-2-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: udc: Fix typo in commenttangmeng
Replace disbale with disable Signed-off-by: tangmeng <tangmeng@uniontech.com> Link: https://lore.kernel.org/r/20220127071619.31812-1-tangmeng@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31USB: ACPI: Replace acpi_bus_get_device()Rafael J. Wysocki
Replace acpi_bus_get_device() that is going to be dropped with acpi_fetch_acpi_dev(). No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/1899393.PYKUYFuaPT@kreacher Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: gadget: f_uac2: Define specific wTerminalTypePavel Hofman
Several users have reported that their Win10 does not enumerate UAC2 gadget with the existing wTerminalType set to UAC_INPUT_TERMINAL_UNDEFINED/UAC_INPUT_TERMINAL_UNDEFINED, e.g. https://github.com/raspberrypi/linux/issues/4587#issuecomment-926567213. While the constant is officially defined by the USB terminal types document, e.g. XMOS firmware for UAC2 (commonly used for Win10) defines no undefined output terminal type in its usbaudio20.h header. Therefore wTerminalType of EP-IN is set to UAC_INPUT_TERMINAL_MICROPHONE and wTerminalType of EP-OUT to UAC_OUTPUT_TERMINAL_SPEAKER for the UAC2 gadget. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220131071813.7433-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transitionAdam Ford
The support the external role switch a variety of situations were addressed, but the transition from USB_ROLE_HOST to USB_ROLE_NONE leaves the host up which can cause some error messages when switching from host to none, to gadget, to none, and then back to host again. xhci-hcd ee000000.usb: Abort failed to stop command ring: -110 xhci-hcd ee000000.usb: xHCI host controller not responding, assume dead xhci-hcd ee000000.usb: HC died; cleaning up usb 4-1: device not accepting address 6, error -108 usb usb4-port1: couldn't allocate usb_device After this happens it will not act as a host again. Fix this by releasing the host mode when transitioning to USB_ROLE_NONE. Fixes: 0604160d8c0b ("usb: gadget: udc: renesas_usb3: Enhance role switch support") Cc: stable <stable@vger.kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20220128223603.2362621-1-aford173@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: raw-gadget: fix handling of dual-direction-capable endpointsJann Horn
Under dummy_hcd, every available endpoint is *either* IN or OUT capable. But with some real hardware, there are endpoints that support both IN and OUT. In particular, the PLX 2380 has four available endpoints that each support both IN and OUT. raw-gadget currently gets confused and thinks that any endpoint that is usable as an IN endpoint can never be used as an OUT endpoint. Fix it by looking at the direction in the configured endpoint descriptor instead of looking at the hardware capabilities. With this change, I can use the PLX 2380 with raw-gadget. Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface") Cc: stable <stable@vger.kernel.org> Tested-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20220126205214.2149936-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: usb251xb: add boost-up property supportTommaso Merciai
Add support for boost-up register of usb251xb hub. boost-up property control USB electrical drive strength This register can be set: - Normal mode -> 0x00 - Low -> 0x01 - Medium -> 0x10 - High -> 0x11 (Normal Default) References: - http://www.mouser.com/catalog/specsheets/2514.pdf p29 Reviewed-by: Richard Leitner <richard.leitner@linux.dev> Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> Link: https://lore.kernel.org/r/20220128181713.96856-1-tomm.merciai@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: ulpi: Call of_node_put correctlySean Anderson
of_node_put should always be called on device nodes gotten from of_get_*. Additionally, it should only be called after there are no remaining users. To address the first issue, call of_node_put if later steps in ulpi_register fail. To address the latter, call put_device if device_register fails, which will call ulpi_dev_release if necessary. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127190004.1446909-3-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: ulpi: Move of_node_put to ulpi_dev_releaseSean Anderson
Drivers are not unbound from the device when ulpi_unregister_interface is called. Move of_node-freeing code to ulpi_dev_release which is called only after all users are gone. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127190004.1446909-2-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 00:19:33 +0000