summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2012-09-06usb: gadget: s3c-hsotg.c: fix error return codeJulia Lawall
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: dwc3: ep0: correct cache sync issue in case of ep0_bouncedPratyush Anand
In case of ep0 out, if length is not aligned to maxpacket size then we use dwc->ep_bounce_addr for dma transfer and not request->dma. Since, we have alreday done memcpy from dwc->ep0_bounce to request->buf, so we do not need to issue cache sync function. In fact, cache sync function will bring wrong data in request->buf from request->dma in this scenario. So, cache sync function must not be executed in case of ep0 bounced. Cc: <stable@vger.kernel.org> # v3.4 v3.5 Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: gadget: add multiple definition guardsAndrzej Pietrasiewicz
If f_fs.c and u_serial.c are combined together using #include, which has been a common practice so far, the pr_vdebug macro is defined multiple times. Define it only once. Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-05Merge tag 'for-usb-linus-2012-09-05' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus xHCI 3.6 bug fixes. Hi Greg, Here's seven bugfixes for 3.6. All of them are marked for stable, and most are vendor-specific fixes. Details: -------- - Commits 052c7f9 and 2963657 fix a couple stupid mistakes I made in a Intel xHCI bug fix patch I pushed just before I left for vacation. - Commits 29d2145 and a96874a fix issues with the Intel Panther Point EHCI to xHCI port switchover. - Commit 71c731a adds the work-around for the TI redriver "dead port" issue. - Commit 319acdf adds a fix for non-PCI xHCI platform drivers. - Commit e955a1c works around the UEFI issue with the xHCI host sometimes returning 0xff's in the MMIO on boot. Sarah Sharp
2012-09-05usb: remove libusualSebastian Andrzej Siewior
The "Low Performance USB Block driver" has been removed which a user of libusual. Now we have only the usb-storage driver as the only driver in tree. This makes libusual needless. This patch removes libusal, fixes up all users. The usual-table is now linked into usb-storage. usb_usual.h remains in public include directory because some staging users seem to need it. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05USB: cp210x: remove useless set memory to zero use memset()Wei Yongjun
The memory return by kzalloc() or kmem_cache_zalloc() has already be set to zero, so remove useless memset(0). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05USB: add device quirk for Joss Optical touchboardAlan Stern
This patch (as1604) adds a CONFIG_INTF_STRINGS quirk for the Joss infrared touchboard device. The device doesn't like to be asked for its interface strings. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: adam ? <adam3337@wp.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05USB: ohci-at91: fix PIO handling in relation with number of portsNicolas Ferre
If the number of ports present on the SoC/board is not the maximum and that the platform data is not filled with all data, there is an easy way to mess the PIO setup for this interface. This quick fix addresses mis-configuration in USB host platform data that is common in at91 boards since commit 0ee6d1e (USB: ohci-at91: change maximum number of ports) that did not modified the associatd board files. Reported-by: Klaus Falkner <klaus.falkner@solectrix.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Stable <stable@vger.kernel.org> [3.4+] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05USB: FHCI: use list_move_tail instead of list_del/list_add_tailWei Yongjun
Using list_move_tail() instead of list_del() + list_add_tail(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05usb: cdc-acm: remove duplicated include from cdc-acm.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05drivers/usb/gadget/lpc32xx_udc.c: adjust inconsistent IS_ERR and PTR_ERRJulia Lawall
Change the call to PTR_ERR to access the value just tested by IS_ERR. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1; @@ ( if (IS_ERR(e)) { ... PTR_ERR(e) ... } | if (IS_ERR(e=e1)) { ... PTR_ERR(e) ... } | *if (IS_ERR(e)) { ... * PTR_ERR(e1) ... } ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05drivers/usb/host/ohci-nxp.c: adjust inconsistent IS_ERR and PTR_ERRJulia Lawall
Change the call to PTR_ERR to access the value just tested by IS_ERR. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1; @@ ( if (IS_ERR(e)) { ... PTR_ERR(e) ... } | if (IS_ERR(e=e1)) { ... PTR_ERR(e) ... } | *if (IS_ERR(e)) { ... * PTR_ERR(e1) ... } ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05usb: ohci: Fix Kconfig dependency on USB_ISP1301Roland Stigge
With "select USB_ISP1301 ...", it could happen that I2C isn't selected although USB_ISP1301 depends on it. Fixing with "depends on ..." and emulating the condition via "|| !()". Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05usb: renesas_usbhs: fixup DMA transport data alignmentKuninori Morimoto
renesas_usbhs dma can transport 8byte alignment data, not 4byte. This patch fixup it. Reported-by: Sugnan Prabhu S <sugnan.prabhu@renesasmobile.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05powerpc/usb: fix bug of CPU hang when missing USB PHY clockShengzhou Liu
when missing USB PHY clock, kernel booting up will hang during USB initialization. We should check USBGP[PHY_CLK_VALID] bit to avoid CPU hanging in this case. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05USB: mos7720: fix to use list_for_each_entry_safe() when delete itemsWei Yongjun
Since we will be removing items off the list using list_del() we need to use a safer version of the list_for_each_entry() macro aptly named list_for_each_entry_safe(). We should use the safe macro if the loop involves deletions of items. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05usb: renesas_usbhs: modify the irq handler for sharing irqShimoda, Yoshihiro
When IORESOURCE_IRQ_SHAREABLE is set, the irq handler may be called even if the interupt of the USB module doesn't happen. So, it may clear the interrupt flags by mistake. This patch fixes it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05USB: isp1301: Remove unused static array and defineRoland Stigge
This patch removes an unused statically defined array and an associated #define. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05usb host: fix spelling of provides in KconfigPeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05USB: ftdi_sio: PID for NZR SEM 16+ USBHorst Schirmeier
This adds the USB PID for the NZR SEM 16+ USB energy monitor device <http://www.nzr.de>. It works perfectly with the GPL software on <http://schou.dk/linux/sparometer/>. Signed-off-by: Horst Schirmeier <horst@schirmeier.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05USB: ftdi-sio: add support for more Physik Instrumente devicesÉric Piel
Commit b69cc672052540 added support for the E-861. After acquiring a C-867, I realised that every Physik Instrumente's device has a different PID. They are listed in the Windows device driver's .inf file. So here are all PIDs for the current (and probably future) USB devices from Physik Instrumente. Compiled, but only actually tested on the E-861 and C-867. Signed-off-by: Éric Piel <piel@delmic.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05usb: host: xhci: fix compilation error for non-PCI based stacksMoiz Sonasath
For non PCI-based stacks, this function call usb_disable_xhci_ports(to_pci_dev(hcd->self.controller)); made from xhci_shutdown is not applicable. Ideally, we wouldn't have any PCI-specific code on a generic driver such as the xHCI stack, but it looks like we should just stub usb_disable_xhci_ports() out for non-PCI devices. [ balbi@ti.com: slight improvement to commit log ] This patch should be backported to kernels as old as 3.0, since the commit it fixes (e95829f474f0db3a4d940cae1423783edd966027 "xhci: Switch PPT ports to EHCI on shutdown.") was marked for stable. Signed-off-by: Moiz Sonasath<m-sonasath@ti.com> Signed-off-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-09-05usb: host: xhci-plat: use ioremap_nocacheRuchika Kharwar
Use the ioremap_nocache variant of the ioremap API in order to make sure our memory will be marked uncachable. This patch should be backported to kernels as old as 3.4, that contain the commit 3429e91a661e1f383aecc86c6bbcf65afb15c892 "usb: host: xhci: add platform driver support". Signed-off-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-09-05usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP HardwareAlexis R. Cortes
This patch is intended to work around a known issue on the SN65LVPE502CP USB3.0 re-driver that can delay the negotiation between a device and the host past the usual handshake timeout. If that happens on the first insertion, the host controller port will enter in Compliance Mode and NO port status event will be generated (as per xHCI Spec) making impossible to detect this event by software. The port will remain in compliance mode until a warm reset is applied to it. As a result of this, the port will seem "dead" to the user and no device connections or disconnections will be detected. For solving this, the patch creates a timer which polls every 2 seconds the link state of each host controller's port (this by reading the PORTSC register) and recovers the port by issuing a Warm reset every time Compliance mode is detected. If a xHC USB3.0 port has previously entered to U0, the compliance mode issue will NOT occur only until system resumes from sleep/hibernate, therefore, the compliance mode timer is stopped when all xHC USB 3.0 ports have entered U0. The timer is initialized again after each system resume. Since the issue is being caused by a piece of hardware, the timer will be enabled ONLY on those systems that have the SN65LVPE502CP installed (this patch uses DMI strings for detecting those systems) therefore making this patch to act as a quirk (XHCI_COMP_MODE_QUIRK has been added to the xhci stack). This patch applies for these systems: Vendor: Hewlett-Packard. System Models: Z420, Z620 and Z820. This patch should be backported to kernels as old as 3.2, as that was the first kernel to support warm reset. The kernels will need to contain both commit 10d674a82e553cb8a1f41027bb3c3e309b3f6804 "USB: When hot reset for USB3 fails, try warm reset" and commit 8bea2bd37df08aaa599aa361a9f8b836ba98e554 "usb: Add support for root hub port status CAS". The first patch add warm reset support, and the second patch modifies the USB core to issue a warm reset when the port is in compliance mode. Signed-off-by: Alexis R. Cortes <alexis.cortes@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-09-05xhci: Make handover code more robustMatthew Garrett
My test platform (Intel DX79SI) boots reliably under BIOS, but frequently crashes when booting via UEFI. I finally tracked this down to the xhci handoff code. It seems that reads from the device occasionally just return 0xff, resulting in xhci_find_next_cap_offset generating a value that's larger than the resource region. We then oops when attempting to read the value. Sanity checking that value lets us avoid the crash. I've no idea what's causing the underlying problem, and xhci still doesn't actually *work* even with this, but the machine at least boots which will probably make further debugging easier. This should be backported to kernels as old as 2.6.31, that contain the commit 66d4eadd8d067269ea8fead1a50fe87c2979a80d "USB: xhci: BIOS handoff and HW initialization." Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-09-05xhci: Fix a logical vs bitwise AND bugDan Carpenter
The intent was to test whether the flag was set. This patch should be backported to stable kernels as old as 3.0, since it fixes a bug in commit e95829f474f0db3a4d940cae1423783edd966027 "xhci: Switch PPT ports to EHCI on shutdown.", which was marked for stable. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-09-05usb: move phy driver from mach-tegra to drivers/usbVenu Byravarasu
As part of this patch: 1. Moved existing tegra phy driver to drivers/USB directory. 2. Added standard USB phy driver APIs to tegra phy driver. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-05usb: gadget: bcm63xx UDC driverKevin Cernekee
Driver for the "USB20D" / "USBD" block on BCM6328, BCM6368, BCM6816, BCM6362, BCM3383, and others. The hardware block was designed to support networking applications (direct connection of a home router to a PC), and the endpoint configuration is fixed. [ balbi@ti.com : dropped USB_GADGET_DUALSPEED from Kconfig ] Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-04Intel xhci: Only switch the switchable portsKeng-Yu Lin
With a previous patch to enable the EHCI/XHCI port switching, it switches all the available ports. The assumption is not correct because the BIOS may expect some ports not switchable by the OS. There are two more registers that contains the information of the switchable and non-switchable ports. This patch adds the checking code for the two register so that only the switchable ports are altered. This patch should be backported to kernels as old as 3.0, that contain commit ID 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Keng-Yu Lin <kengyu@canonical.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-09-04xhci: Recognize USB 3.0 devices as superspeed at powerupManoj Iyer
On Intel Panther Point chipset USB 3.0 devices show up as high-speed devices on powerup, but after an s3 cycle they are correctly recognized as SuperSpeed. At powerup switch the port to xHCI so that USB 3.0 devices are correctly recognized. BugLink: http://bugs.launchpad.net/bugs/1000424 This patch should be backported to kernels as old as 3.0, that contain commit ID 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-09-03usb: gadget: s3c-hsotg: Use devm_clk_get functionSachin Kamat
devm_* functions are already used in this file. Hence convert clk_get to devm_clk_get for completeness. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-03usb: gadget: s3c-hsudc: Replace 0 with NULL for pointersSachin Kamat
Silences the following type of sparse warnings: warning: Using plain integer as NULL pointer Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-03usb: gadget: s3c-hsudc: Add missing braces around sizeofSachin Kamat
Silences the following checkpatch warning: WARNING: sizeof *hsreq should be sizeof(*hsreq) Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-03usb: gadget: s3c-hsudc: Use devm_* functionsSachin Kamat
devm_* functions are used to replace kzalloc, request_mem_region, ioremap clk_get and request_irq functions in probe call. With the usage of devm_* functions explicit freeing and unmapping is not required. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: musb: core: fix kernel-doc of musb_init_controller()Sergei Shtylyov
Some parameter names in this function's kernel-doc don't match the real parameters. While at it, give the 'nIrq' parameter slightly more verbose description. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: gadget: remove duplicated include from pxa25x_udc.cWei Yongjun
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: gadget: lpc32xx_udc.c: adjust inconsistent IS_ERR and PTR_ERRJulia Lawall
Change the call to PTR_ERR to access the value just tested by IS_ERR. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1; @@ ( if (IS_ERR(e)) { ... PTR_ERR(e) ... } | if (IS_ERR(e=e1)) { ... PTR_ERR(e) ... } | *if (IS_ERR(e)) { ... * PTR_ERR(e1) ... } ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: gadget: get rid of USB_GADGET_{DUAL,SUPER}SPEEDMichal Nazarewicz
This commit removes USB_GADGET_DUALSPEED and USB_GADGET_SUPERSPEED Kconfig options. Since now kernel allows many UDC drivers to be compiled, those options may turn to no longer be valid. For instance, if someone decides to build UDC that supports super speed and UDC that supports high speed only, the latter will be "assumed" to support super speed since USB_GADGET_SUPERSPEED will be selected by the former. The test of whether CONFIG_USB_GADGET_*SPEED was defined was just an optimisation which removed otherwise dead code (ie. if UDC is not dual speed, there is no need to handle cases that can happen if speed is high). This commit removes those checks. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: gadget: s3c2410_udc: Do not use integer for NULLSachin Kamat
'req' being a pointer shouldn't be equated with 0. Fixes the following compilation warning: drivers/usb/gadget/s3c2410_udc.c:1299:13: warning: Using plain integer as NULL pointer Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: gadget: s3c2410_udc: Move assignment outside if conditionSachin Kamat
Fixes the following checkpatch errors: ERROR: do not use assignment in if condition Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: gadget: s3c2410_udc: Silence checkpatch errors and warningsSachin Kamat
Silences about 75 errors and warnings related to - Spacing - Alignment of braces - Line over 80 characters Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: gadget: s3c2410_udc: Use pr_* and dev_err functionsSachin Kamat
Replace printk with corresponding pr_* and dev_err functions. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: gadget: s3c2410_udc: Replace <asm/io.h> with <linux/io.h>Sachin Kamat
Fixes the following warning: WARNING: Use #include <linux/io.h> instead of <asm/io.h> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: gadget: dummy-hcd: remember to update driver pointerAlan Stern
This patch (as1599) fixes dummy-hcd to make it update the appropriate driver pointer when a new gadget driver is bound or unbound. Without this change, the gadget driver's name doesn't appear in dev_printk output. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: gadget: lpc32xx_udc: Support multiple controllersRoland Stigge
The lpc32xx_udc driver supported only one controller by defining a global static struct for it. This patch enables multiple instances of the controller by dynamic allocation of the struct at probe(). A static struct is kept as a template on initialization since it does some complex preset, reflecting fixed hardware endpoint structure. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: gadget: lpc32xx_udc: Remove usb_endpoint_descriptorRoland Stigge
This patch removes the utilization of struct usb_endpoint_descriptor, as done by other drivers also. This was done on request by the USB gadget maintainers, since this API is obsoleted. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: gadget: lpc32xx_udc: Port to new start/stop interfaceRoland Stigge
This patch adjusts the LPC32xx USB gadget driver to the new udc_start / udc_stop interface. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: dwc3: set up burst size only superspeed modeChanho Park
When connection is established non-ss mode, endpoint.maxburst is correctly set to 0, this means that current code will set maxburst bitfield on DEPCFG's parameter 0 to the highest possible value (0x0f) which is wrong. Even though this hasn't caused any issues so far (HW seems to ignore that when not running in SS mode) we want to make sure maxburst bitfield is only set to anything other than zero if we're running on SuperSpeed mode. In order to achieve that, let's check for gadget's operating speed before setting maxburst bitfield when issuing DEPCFG command. [ balbi@ti.com : improved commit log a bit in order to clarify the situation ] Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: dwc3: core: memory ordering fix in closeOliver Neukum
As a bitmap is used for free/used. As a device freed all memory operations must be scheduled before the bitmap is manipulated. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-27Merge v3.6-rc3 into usb-nextGreg Kroah-Hartman
This picks up fixes that we need in this branch for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 20:27:16 +0000