summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2012-08-27Merge 3.6-rc3 into tty-nextGreg Kroah-Hartman
This picks up all of the different fixes in Linus's tree that we also need here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-26ARM: mach-pnx4008: Remove architectureRoland Stigge
This patch removes the ARM architecture mach-pnx4008. No direct support or user feedback since 2006. Acknowledgements from NXP/Philips and Linux arm-soc maintainers. Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-08-23usb: renesas_usbhs: modify the irq handler for sharing irqShimoda, Yoshihiro
When IORESOURCE_IRQ_SHAREABLE is set, the irq handler may be called even if the interupt of the USB module doesn't happen. So, it may clear the interrupt flags by mistake. This patch fixes it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: use %pm to print mac addressesAndy Shevchenko
%pm already provides pretty print for mac addresses, let's use that and drop homebrew mac address printing. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: udc-core: Race between disconnect/unbind and setupKevin Cernekee
usb_gadget_remove_driver() runs through a four-step sequence to shut down the gadget driver. For the case of a composite gadget + at91 UDC, this would look like: udc->driver->disconnect(udc->gadget); // composite_disconnect() usb_gadget_disconnect(udc->gadget); // at91_pullup(gadget, 0) udc->driver->unbind(udc->gadget); // composite_unbind() usb_gadget_udc_stop(udc->gadget, udc->driver); // at91_stop() The UDC driver can receive SETUP packets from the host up until the point when usb_gadget_disconnect() returns. On rare occasions, the gadget driver may see this sequence: udc->driver->disconnect(udc->gadget); // composite_disconnect() udc->driver->setup(udc->gadget, &ctrl); // composite_setup() udc->driver->unbind(udc->gadget); // composite_unbind() Some gadget drivers, such as composite, assume this will never happen and crash as a result. The fix is to quiesce the UDC hardware (via usb_gadget_disconnect) before running the gadget driver through the disconnect/unbind sequence. Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: use native print_hex_dump_bytes()Andy Shevchenko
Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: s3c-hsotg: fix core reset timeout failureDu, Changbin
The timeout values were 1000 and timeout issue occured many times on my s3c6410 Soc based board (mostly when booting whith USB cable not connected). This patch increase the values to 10000 to guarantee the success of reset. Having set timeout to 10000, I printed the remained timeout values which could cause timeout issue before this change (tested several times). the first timeout value remained: timeout = 8079 timeout = 8079 timeout = 8078 timeout = 8081 the second timeout value remained: timeout = 7940 timeout = 7945 timeout = 7940 timeout = 7938 Seeing from above values, I think the value 10000 is big enough. Signed-off-by: Du, Changbin <changbin.du@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb composite: fix locking in usb_function_activateMichael Grzeschik
The lockdep hunter mentions a non consistent usage of spin_lock and spin_lock_irqsafe in the composite_disconnect and usb_function_activate function: [ 15.700897] ================================= [ 15.705255] [ INFO: inconsistent lock state ] [ 15.709617] 3.5.0-rc5+ #413 Not tainted [ 15.713453] --------------------------------- [ 15.717812] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 15.723822] uvc-gadget/116 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 15.729222] (&(&cdev->lock)->rlock){?.+...}, at: [<7f0049e8>] composite_disconnect+0x2c/0x74 [g_webcam] [ 15.738797] {HARDIRQ-ON-W} state was registered at: [ 15.743677] [<8006de3c>] mark_lock+0x148/0x688 [ 15.748325] [<8006ecb0>] __lock_acquire+0x934/0x1b74 [ 15.753481] [<8007047c>] lock_acquire+0x98/0x138 [ 15.758288] [<804c776c>] _raw_spin_lock+0x4c/0x84 [ 15.763188] [<7f006ae4>] usb_function_activate+0x28/0x94 [g_webcam] [ 15.769652] [<7f00820c>] usb_ep_autoconfig_reset+0x78/0x98 [g_webcam] [ 15.776287] [<7f0082a4>] uvc_v4l2_open+0x78/0x94 [g_webcam] [ 15.782054] [<80366a38>] v4l2_open+0x104/0x130 [ 15.786697] [<800efd30>] chrdev_open+0xa0/0x170 [ 15.791423] [<800e9718>] do_dentry_open.isra.13+0x1e8/0x264 [ 15.797186] [<800ea5d4>] nameidata_to_filp+0x58/0x94 [ 15.802340] [<800fa29c>] do_last.isra.31+0x2a0/0x808 [ 15.807497] [<800faa40>] path_openat+0xc8/0x3e8 [ 15.812216] [<800fae90>] do_filp_open+0x3c/0x90 [ 15.816936] [<800ea6fc>] do_sys_open+0xec/0x184 [ 15.821655] [<800ea7c4>] sys_open+0x30/0x34 [ 15.826027] [<8000e5c0>] ret_fast_syscall+0x0/0x48 [ 15.831015] irq event stamp: 6048 [ 15.834330] hardirqs last enabled at (6047): [<804c81b8>] _raw_spin_unlock_irqrestore+0x40/0x54 [ 15.843132] hardirqs last disabled at (6048): [<8000e174>] __irq_svc+0x34/0x60 [ 15.850370] softirqs last enabled at (5940): [<80028380>] __do_softirq+0x188/0x270 [ 15.858043] softirqs last disabled at (5935): [<80028944>] irq_exit+0xa0/0xa8 [ 15.865195] [ 15.865195] other info that might help us debug this: [ 15.871724] Possible unsafe locking scenario: [ 15.871724] [ 15.877645] CPU0 [ 15.880091] ---- [ 15.882537] lock(&(&cdev->lock)->rlock); [ 15.886659] <Interrupt> [ 15.889278] lock(&(&cdev->lock)->rlock); [ 15.893573] [ 15.893573] *** DEADLOCK *** [ 15.893573] [ 15.899496] no locks held by uvc-gadget/116. [ 15.903765] [ 15.903765] stack backtrace: [ 15.908125] Backtrace: [ 15.910604] [<80012038>] (dump_backtrace+0x0/0x114) from [<804bf8a4>] (dump_stack+0x20/0x24) [ 15.919043] r6:dfb8e6f0 r5:dfb8e400 r4:809717ec r3:60000193 [ 15.924766] [<804bf884>] (dump_stack+0x0/0x24) from [<804c0c0c>] (print_usage_bug+0x258/0x2c0) [ 15.933388] [<804c09b4>] (print_usage_bug+0x0/0x2c0) from [<8006e240>] (mark_lock+0x54c/0x688) [ 15.942006] [<8006dcf4>] (mark_lock+0x0/0x688) from [<8006edb8>] (__lock_acquire+0xa3c/0x1b74) [ 15.950625] [<8006e37c>] (__lock_acquire+0x0/0x1b74) from [<8007047c>] (lock_acquire+0x98/0x138) [ 15.959418] [<800703e4>] (lock_acquire+0x0/0x138) from [<804c78fc>] (_raw_spin_lock_irqsave+0x58/0x94) [ 15.968736] [<804c78a4>] (_raw_spin_lock_irqsave+0x0/0x94) from [<7f0049e8>] (composite_disconnect+0x2c/0x74 [g_webcam]) [ 15.979605] r7:00000012 r6:df82b0c4 r5:ded755bc r4:ded75580 [ 15.985331] [<7f0049bc>] (composite_disconnect+0x0/0x74 [g_webcam]) from [<8033c170>] (_gadget_stop_activity+0xc4/0x120) [ 15.996200] r6:df82b0c4 r5:df82b0c8 r4:df82b0d0 r3:7f0049bc [ 16.001919] [<8033c0ac>] (_gadget_stop_activity+0x0/0x120) from [<8033e390>] (udc_irq+0x724/0xcb8) [ 16.010877] r6:df82b010 r5:00000000 r4:df82b010 r3:00000000 [ 16.016595] [<8033dc6c>] (udc_irq+0x0/0xcb8) from [<8033baec>] (ci_irq+0x64/0xdc) [ 16.024086] [<8033ba88>] (ci_irq+0x0/0xdc) from [<80086538>] (handle_irq_event_percpu+0x74/0x298) [ 16.032958] r5:807fd414 r4:df38fdc0 [ 16.036566] [<800864c4>] (handle_irq_event_percpu+0x0/0x298) from [<800867a8>] (handle_irq_event+0x4c/0x6c) [ 16.046315] [<8008675c>] (handle_irq_event+0x0/0x6c) from [<80089318>] (handle_level_irq+0xbc/0x11c) [ 16.055447] r6:def04000 r5:807fd414 r4:807fd3c0 r3:00020000 [ 16.061166] [<8008925c>] (handle_level_irq+0x0/0x11c) from [<80085cc8>] (generic_handle_irq+0x38/0x4c) [ 16.070472] r5:807f7f64 r4:8081e9f8 [ 16.074082] [<80085c90>] (generic_handle_irq+0x0/0x4c) from [<8000ef98>] (handle_IRQ+0x5c/0xbc) [ 16.082788] [<8000ef3c>] (handle_IRQ+0x0/0xbc) from [<800085cc>] (tzic_handle_irq+0x6c/0x9c) [ 16.091225] r8:00000000 r7:def059b0 r6:00000001 r5:00000000 r4:00000000 r3:00000012 [ 16.099141] [<80008560>] (tzic_handle_irq+0x0/0x9c) from [<8000e184>] (__irq_svc+0x44/0x60) [ 16.107494] Exception stack(0xdef059b0 to 0xdef059f8) [ 16.112550] 59a0: 00000001 00000001 00000000 dfb8e400 [ 16.120732] 59c0: 40000013 81a2e500 00000000 81a2e500 00000000 00000000 80862418 def05a0c [ 16.128912] 59e0: def059c8 def059f8 80070e24 804c81bc 20000013 ffffffff [ 16.135542] [<804c8178>] (_raw_spin_unlock_irqrestore+0x0/0x54) from [<8003d0ec>] (__queue_work+0x108/0x470) [ 16.145369] r5:dfb1a30c r4:81b93c00 [ 16.148978] [<8003cfe4>] (__queue_work+0x0/0x470) from [<8003d4e0>] (queue_work_on+0x4c/0x54) [ 16.157511] [<8003d494>] (queue_work_on+0x0/0x54) from [<8003d544>] (queue_work+0x30/0x34) [ 16.165774] r6:df2e6900 r5:80e0c2f8 r4:dfb1a2c8 r3:def04000 [ 16.171495] [<8003d514>] (queue_work+0x0/0x34) from [<80493284>] (rpc_make_runnable+0x9c/0xac) [ 16.180113] [<804931e8>] (rpc_make_runnable+0x0/0xac) from [<80493c88>] (rpc_execute+0x40/0xa8) [ 16.188811] r5:def05ad4 r4:dfb1a2c8 [ 16.192426] [<80493c48>] (rpc_execute+0x0/0xa8) from [<8048c734>] (rpc_run_task+0xa8/0xb4) [ 16.200690] r8:00000001 r7:df74f520 r6:ded75700 r5:def05ad4 r4:dfb1a2c8 r3:00000002 [ 16.208618] [<8048c68c>] (rpc_run_task+0x0/0xb4) from [<801f1608>] (nfs_initiate_read+0xb4/0xd4) [ 16.217403] r5:df3e86c0 r4:00000000 [ 16.221015] [<801f1554>] (nfs_initiate_read+0x0/0xd4) from [<801f1c64>] (nfs_generic_pg_readpages+0x9c/0x114) [ 16.230937] [<801f1bc8>] (nfs_generic_pg_readpages+0x0/0x114) from [<801f0744>] (__nfs_pageio_add_request+0xe8/0x214) [ 16.241545] r8:000bf000 r7:00000000 r6:00000000 r5:deef4640 r4:def05c1c r3:801f1bc8 [ 16.249463] [<801f065c>] (__nfs_pageio_add_request+0x0/0x214) from [<801f0e3c>] (nfs_pageio_add_request+0x28/0x54) [ 16.259818] [<801f0e14>] (nfs_pageio_add_request+0x0/0x54) from [<801f1394>] (readpage_async_filler+0x114/0x170) [ 16.269992] r5:def05c58 r4:80fd7300 [ 16.273607] [<801f1280>] (readpage_async_filler+0x0/0x170) from [<800bb418>] (read_cache_pages+0xa0/0x108) [ 16.283259] r8:00200200 r7:00100100 r6:df74f654 r5:def05cd0 r4:80fd7300 [ 16.290034] [<800bb378>] (read_cache_pages+0x0/0x108) from [<801f218c>] (nfs_readpages+0xc4/0x168) [ 16.298999] [<801f20c8>] (nfs_readpages+0x0/0x168) from [<800bb1d0>] (__do_page_cache_readahead+0x254/0x354) [ 16.308833] [<800baf7c>] (__do_page_cache_readahead+0x0/0x354) from [<800bb5d0>] (ra_submit+0x38/0x40) [ 16.318145] [<800bb598>] (ra_submit+0x0/0x40) from [<800bb6b0>] (ondemand_readahead+0xd8/0x3b0) [ 16.326851] [<800bb5d8>] (ondemand_readahead+0x0/0x3b0) from [<800bba20>] (page_cache_async_readahead+0x98/0xa8) [ 16.337043] [<800bb988>] (page_cache_async_readahead+0x0/0xa8) from [<800b2118>] (generic_file_aio_read+0x5b4/0x7c4) [ 16.347565] r6:00000000 r5:df74f654 r4:80fd70a0 [ 16.352231] [<800b1b64>] (generic_file_aio_read+0x0/0x7c4) from [<801e82c0>] (nfs_file_read+0x7c/0xcc) [ 16.361544] [<801e8244>] (nfs_file_read+0x0/0xcc) from [<800eab80>] (do_sync_read+0xb4/0xf4) [ 16.369981] r9:00000000 r8:def05f70 r7:00000000 r6:00000000 r5:dec34900 r4:fffffdee [ 16.377896] [<800eaacc>] (do_sync_read+0x0/0xf4) from [<800eb548>] (vfs_read+0xb4/0x144) [ 16.385987] r8:00000000 r7:def05f70 r6:76a95008 r5:003e3dd6 r4:dec34900 [ 16.392761] [<800eb494>] (vfs_read+0x0/0x144) from [<800eb624>] (sys_read+0x4c/0x78) [ 16.400504] r8:00000000 r7:00000003 r6:003e3dd6 r5:76a95008 r4:dec34900 [ 16.407279] [<800eb5d8>] (sys_read+0x0/0x78) from [<8000e5c0>] (ret_fast_syscall+0x0/0x48) [ 16.415543] r9:def04000 r8:8000e864 r6:000086b4 r5:00000000 r4:00000000 [ 20.872729] gadget: high-speed config #1: Video [ 20.877368] gadget: uvc_function_set_alt(0, 0) [ 20.881908] gadget: uvc_function_set_alt(1, 0) [ 20.891464] gadget: uvc_function_set_alt(1, 0) Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: mv_udc: fix boot up hangNeil Zhang
Fix boot up hang when enable udc without otg enabled. The root cause is that the clock will be shut down when probe routine is finished because of clock gating. When a gadget driver is registered at this time, it will call mv_udc_start which in turn will call mv_udc_vbus_session. If there is no cable attached at the boot up time, the vbus is low, so it will call stop_activity path without clock enabled which will cause system hang then. Actually, we need't go this path when clock is disabled, what we need to do is just jump out. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: mv_udc: fix hang when shutdownYunfan Zhang
Fix system hang in udc shutdown routine which caused by accessing usb register when clock is disabled. So enable usb clock before access register. Signed-off-by: Yunfan Zhang <yfzhang@marvell.com> Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: mv_udc: add iso supportChao Xie
In order to support iso, we need do the following things: 1. fix length for one dtd 2. allow req contains multiple packets for a ISO transfer Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Yu Xu <yuxu@marvell.com> Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: mv_udc: enable stream modeNeil Zhang
According to ChipIdea's reference manual in section 8.5.2 "Non-streaming operational mode in device mode", we'd better enable stream mode, especially that ISO endpoints are not supported when the SDIS bit is set. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: mv_udc: avoid sleeping on spinlockNeil Zhang
build_dtd() can be called when hold a spinlock, but GFP_KERNEL may cause dma_pool_alloc() sleep, So we need use GFP_ATOMIC instead of GFP_KERNEL. But using GFP_ATOMIC may cause failure when allocating memory, add error handler to handle it. Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: mv_udc: remove unused codeNeil Zhang
Clean unused code for mv_udc driver. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: mv_udc: reduce the delay intervalNeil Zhang
There are several places use udelay(LOOPS_USEC) to wait the status to be changed, but the delay interval is a bit too long, so reduce it to enhance the performance. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-20workqueue: deprecate flush[_delayed]_work_sync()Tejun Heo
flush[_delayed]_work_sync() are now spurious. Mark them deprecated and convert all users to flush[_delayed]_work(). If you're cc'd and wondering what's going on: Now all workqueues are non-reentrant and the regular flushes guarantee that the work item is not pending or running on any CPU on return, so there's no reason to use the sync flushes at all and they're going away. This patch doesn't make any functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mattia Dongili <malattia@linux.it> Cc: Kent Yoder <key@linux.vnet.ibm.com> Cc: David Airlie <airlied@linux.ie> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: Anton Vorontsov <cbou@mail.ru> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Avi Kivity <avi@redhat.com>
2012-08-20usb: convert USB_QUIRK_RESET_MORPHS to USB_QUIRK_RESETLan Tianyu
Since the attribute avoid_reset_quirk is work for all devices including those devices that can't morph, convert USB_QUIRK_RESET_MORPHS to USB_QUIRK_RESET. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-20usb/endpoint: Set release callback in the struct device_type instead of in ↵Lan Tianyu
the device itself directly For following the way the rest of the usb core does, this patch is to change the place of setting release callback. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-20Merge tag 'usb-3.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull more USB patches from Greg Kroah-Hartman: "Here are 10 more USB patches for 3.6-rc3. They all fix reported problems (build problems for one of them, and easily repeatable oopses for the others.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: gpu/mfd/usb: Fix USB randconfig problems USB: CDC ACM: Fix NULL pointer dereference USB: emi62: remove __devinit* from the struct usb_device_id table USB: winbond: remove __devinit* from the struct usb_device_id table USB: vt6656: remove __devinit* from the struct usb_device_id table USB: rtl8187: remove __devinit* from the struct usb_device_id table USB: p54usb: remove __devinit* from the struct usb_device_id table USB: spca506: remove __devinit* from the struct usb_device_id table USB: jl2005bcd: remove __devinit* from the struct usb_device_id table USB: smsusb: remove __devinit* from the struct usb_device_id table
2012-08-20gpu/mfd/usb: Fix USB randconfig problemsGuenter Roeck
Fix config warning: warning: ( ... && DRM_USB) selects USB which has unmet direct dependencies (USB_SUPPORT && USB_ARCH_HAS_HCD) and build error: ERROR: "usb_speed_string" [drivers/usb/core/usbcore.ko] undefined! by adding the missing dependency on USB_ARCH_HAS_HCD to DRM_UDL and DRM_USB. This exposes: drivers/video/Kconfig:36:error: recursive dependency detected! drivers/video/Kconfig:36: symbol FB is selected by DRM_KMS_HELPER drivers/gpu/drm/Kconfig:28: symbol DRM_KMS_HELPER is selected by DRM_UDL drivers/gpu/drm/udl/Kconfig:1: symbol DRM_UDL depends on USB_ARCH_HAS_HCD drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI drivers/usb/Kconfig:16: symbol USB_ARCH_HAS_OHCI depends on I2C drivers/i2c/Kconfig:5: symbol I2C is selected by FB_DDC drivers/video/Kconfig:86: symbol FB_DDC is selected by FB_CYBER2000_DDC drivers/video/Kconfig:385: symbol FB_CYBER2000_DDC depends on FB_CYBER2000 drivers/video/Kconfig:373: symbol FB_CYBER2000 depends on FB which is due to drivers/usb/Kconfig: config USB_ARCH_HAS_OHCI ... default y if ARCH_PNX4008 && I2C Fix by dropping I2C from the above dependency; logic is that this is not a platform dependency but a configuration dependency: the _architecture_ still supports USB even is I2C is not selected. This exposes: drivers/video/Kconfig:36:error: recursive dependency detected! drivers/video/Kconfig:36: symbol FB is selected by DRM_KMS_HELPER drivers/gpu/drm/Kconfig:28: symbol DRM_KMS_HELPER is selected by DRM_UDL drivers/gpu/drm/udl/Kconfig:1: symbol DRM_UDL depends on USB_ARCH_HAS_HCD drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI drivers/usb/Kconfig:17: symbol USB_ARCH_HAS_OHCI depends on MFD_TC6393XB drivers/mfd/Kconfig:396: symbol MFD_TC6393XB depends on GPIOLIB drivers/gpio/Kconfig:35: symbol GPIOLIB is selected by FB_VIA drivers/video/Kconfig:1560: symbol FB_VIA depends on FB which can be fixed by having MFD_TC6393XB select GPIOLIB instead of depending on it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-20usb: musb: fix spelling of families in KconfigPeter Meerwald
Trivial patch fixin spelling of families in Kconfig [ balbi@ti.com : added the obvious commit log ] Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-20usb: musb: omap2430.c delete unused variable.Matthias Brugger
Variable ret is always evaluated as true, so we don't need to check it. Signed-off-by: Matthias Brugger <mbrugger@iseebcn.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-20usb: phy: isp1301: Remove unused static array and defineRoland Stigge
This patch removes an unused statically defined array and an associated #define. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-17USB: CDC ACM: Fix NULL pointer dereferenceSven Schnelle
If a device specifies zero endpoints in its interface descriptor, the kernel oopses in acm_probe(). Even though that's clearly an invalid descriptor, we should test wether we have all endpoints. This is especially bad as this oops can be triggered by just plugging a USB device in. Signed-off-by: Sven Schnelle <svens@stackframe.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-17USB: emi62: remove __devinit* from the struct usb_device_id tableGreg Kroah-Hartman
This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-17Merge tag 'usb-3.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here are a number of small USB patches for 3.6-rc3. The "large" one is just a number of device id updates to the option driver, done by the manufacturer, properly fixing up the device ids based on shipping devices. Other than that, some gadget driver fixes, the obligitary XHCI patches, and some other device ids and bugs fixed. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) USB: qcserial: fix port handling on Gobi 1K and 2K+ USB: serial: Fix mos7840 timeout USB: option: add ZTE K5006-Z usb: gadget: u_ether: fix kworker 100% CPU issue with still used interfaces in eth_stop usb: host: tegra: fix warning messages in ehci_remove usb: host: mips: sead3: Update for EHCI register structure. usb: renesas_usbhs: fixup resume method for autonomy mode usb: renesas_usbhs: mod_host: add missing .bus_suspend/resume update MAINTAINERS for Oliver Neukum usb: usb_wwan: resume/suspend can be called after port is gone usb: serial: prevent suspend/resume from racing against probe/remove usb: usb_wwan: replace release and disconnect with a port_remove hook usb: serial: mos7840: Fixup mos7840_chars_in_buffer() USB: isp1362-hcd.c: usb message always saved in case of underrun OMAP: USB : Fix the EHCI enumeration and core retention issue usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module USB: support the new interfaces of Huawei Data Card devices in option driver USB: ftdi_sio: Add VID/PID for Kondo Serial USB xhci: Switch PPT ports to EHCI on shutdown. xhci: Fix bug after deq ptr set to link TRB. ...
2012-08-16ARM: vt8500: Add support for UHCI companion controllerTony Prisk
Add support for a generic non-pci UHCI companion controller. Existing board files for arch-vt8500 updated to include UHCI support. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16ARM: vt8500: Update vt8500-ehci driver to support device tree.Tony Prisk
Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16USB: qcserial: fix port handling on Gobi 1K and 2K+Dan Williams
Bjorn's latest patchset does break Gobi 1K and 2K because on both devices as it claims usb interface 0. That's because usbif 0 is not handled in the switch statement, and thus the if0 gets claimed when it should not. So let's just make things even simpler yet, and handle both the 1K and 2K+ cases separately. This patch should not affect the new Sierra device support, because those devices are matched via interface-specific matching and thus should never hit the composite code. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15drivers/usb/gadget/s3c-hsotg.c: fix error return codeJulia Lawall
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15drivers/usb/wusbcore/wa-hc.c: fix error return codeJulia Lawall
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15drivers/usb/host/ohci-platform.c: fix error return codeJulia Lawall
Convert a possibly 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15drivers/usb/host/ehci-platform.c: fix error return codeJulia Lawall
Convert a possibly 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15USB: atm: ueagle-atm: Declare MODULE_FIRMWARE usageTim Gardner
Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Matthieu Castet <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15USB: storage: ene_ub6250: Use macros for firmware namesTim Gardner
Advertise firmware files using MODULE_FIRMWARE macros. Fix a debug string: SD_RDWR_PATTERN --> SD_RW_PATTERN Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15USB: qcserial: fix port handling on Gobi 1K and 2K+Dan Williams
Bjorn's latest patchset does break Gobi 1K and 2K because on both devices as it claims usb interface 0. That's because usbif 0 is not handled in the switch statement, and thus the if0 gets claimed when it should not. So let's just make things even simpler yet, and handle both the 1K and 2K+ cases separately. This patch should not affect the new Sierra device support, because those devices are matched via interface-specific matching and thus should never hit the composite code. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15USB: whci-hcd: fix NULL dereference on allocation failureDan Carpenter
If usb_create_hcd() fails here then we dereference "whc" inside the call to whc_clean_up() before it has been set. The compiler would have warned about this if we hadn't initialized all the pointers to NULL at the start of the function. I've cleaned that up as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15USB: legousbtower.c: remove a bogus NULL checkDan Carpenter
"udev" can't be NULL here. The debugging printk() makes static checkers complain when we dereference it later in the function inside the call to usb_rcvctrlpipe(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15USB: serial: Fix mos7840 timeoutMark Ferrell
* mos7840 driver was using multiple of HZ for the timeout handed off to usb_control_msg(). Changed the timeout to use msecs instead. * Remove unused WAIT_FOR_EVER definition Signed-off-by: Mark Ferrell <mferrell@uplogix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15USB: option: add ZTE K5006-ZBjørn Mork
The ZTE (Vodafone) K5006-Z use the following interface layout: 00 DIAG 01 secondary 02 modem 03 networkcard 04 storage Ignoring interface #3 which is handled by the qmi_wwan driver. Cc: Thomas Schäfer <tschaefer@t-online.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15usb: dwc3: gadget: warn about endpoint already enabled before changing ep nameFelipe Balbi
In case some gadget driver tries to enable an endpoint which is already enabled, we print a nice WARN so we can track broken gadget drivers. The only problem is that we're printing the WARN when we already changed endpoint's name, which would result in endpoints named as: ep1in-bulk-bulk-bulk-bulk-bulk-bulk-bulk To prevent that, we will continue to print the WARN, but do so before changing endpoint's name and return early. Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-14usb: musb: omap2430: don't loop indefinitely in interrupt.NeilBrown
When called during resume_irqs, omap2430_musb_set_vbus() is run with interrupts disabled, In that case 'jiffies' never changes so the loop can loop forever. So impose a maximum loop count and add an 'mdelay' to ensure we wait a reasonable amount of time for bit to be cleared. This fixes a hang on resume. Signed-of-by: NeilBrown <neilb@suse.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-13TTY: use tty_port_register_deviceJiri Slaby
Currently we have no way to assign tty->port while performing tty installation. There are two ways to provide the link tty_struct => tty_port. Either by calling tty_port_install from tty->ops->install or tty_port_register_device called instead of tty_register_device when the device is being set up after connected. In this patch we modify most of the drivers to do the latter. When the drivers use tty_register_device and we have tty_port already, we switch to tty_port_register_device. So we have the tty_struct => tty_port link for free for those. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-12Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc bug fixes from Arnd Bergmann: "These are a bunch of bug fixes that came in after the merge window and one update for the MAINTAINERS file. The largest part of the fixes are patches that address bugs found by building all the ARM defconfig files. There are a lot more warnings that we have patches for, but the others are either still under discussion or are harmless and do not cause actual problems besides making the build slightly noisy." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits) ARM: davinci: remove broken ntosd2_init_i2c ARM: s3c24xx: enable CONFIG_BUG for tct_hammer omap-rng: fix use of SIMPLE_DEV_PM_OPS spi/s3c64xx: improve error handling mtd/omap2: fix dmaengine_slave_config error handling gpio: em: do not discard em_gio_irq_domain_cleanup ARM: exynos: exynos_pm_add_dev_to_genpd may be unused ARM: imx: gpmi-nand depends on mxs-dma ARM: integrator: include <linux/export.h> ARM: s3c24xx: use new PWM driver ARM: sa1100: include linux/io.h in hackkit leds code Input: eeti_ts: pass gpio value instead of IRQ ARM: pxa: remove irq_to_gpio from ezx-pcap driver ARM: tegra: more regulator fixes for Harmony usb/ohci-omap: remove unused variable mfd/asic3: fix asic3_mfd_probe return value ARM: kirkwood: fix typo in Makefile.boot i.MX27: Fix emma-prp and csi clocks. ARM: integrator: use clk_prepare_enable() for timer MAINTAINERS: update entry for Linus Walleij ...
2012-08-10tty: fix the metro-usb change I messed upAlan Cox
Fixes the leak of a tty kref that Jiri pointed out. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10tty: fix up usb serial console for termios change.Stephen Rothwell
fixes these errors: drivers/usb/serial/console.c: In function 'usb_console_setup': drivers/usb/serial/console.c:168:16: error: invalid type argument of '->' (have 'struct ktermios') drivers/usb/serial/console.c:169:4: error: incompatible type for argument 1 of 'tty_termios_encode_baud_rate' include/linux/tty.h:449:13: note: expected 'struct ktermios *' but argument is of type 'struct ktermios' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10usb: Rename temp variable "config" to "val" in the set_avoid_reset_quirk()Lan Tianyu
In USB, the word "config" already has aseparate meaning. So it will cause confusion if use "config" as variable's name for other purposes. This patch is to convert the "config" to "val" Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10USB: whci-hcd: Fix potential memory leak in qset_add_urb_sg()Alexey Khoroshilov
Do not leak memory by updating pointer with potentially NULL realloc return value. By the way remove unused local variable: struct whc_page_list_entry *entry; More precisely, it was used to increment uninitialized value within one of cycles. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10wusb: Fix potential memory leak in wusb_dev_sec_add()Alexey Khoroshilov
Do not leak memory by updating pointer with potentially NULL realloc return value. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10usb: host: ohci-platform: add platform specific power callbackKuninori Morimoto
This patch enables to call platform specific power callback function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 22:11:57 +0000