summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2021-06-09usb: f_ncm: only first packet of aggregate needs to start timerMaciej Żenczykowski
The reasoning for this change is that if we already had a packet pending, then we also already had a pending timer, and as such there is no need to reschedule it. This also prevents packets getting delayed 60 ms worst case under a tiny packet every 290us transmit load, by keeping the timeout always relative to the first queued up packet. (300us delay * 16KB max aggregation / 80 byte packet =~ 60 ms) As such the first packet is now at most delayed by 300us. Under low transmit load, this will simply result in us sending a shorter aggregate, as originally intended. This patch has the benefit of greatly reducing (by ~10 factor with 1500 byte frames aggregated into 16 kiB) the number of (potentially pretty costly) updates to the hrtimer. Cc: Brooke Basile <brookebasile@gmail.com> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20210608085438.813960-1-zenczykowski@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09USB: f_ncm: ncm_bitrate (speed) is unsignedMaciej Żenczykowski
[ 190.544755] configfs-gadget gadget: notify speed -44967296 This is because 4250000000 - 2**32 is -44967296. Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added") Cc: Brooke Basile <brookebasile@gmail.com> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Yauheni Kaliuta <yauheni.kaliuta@nokia.com> Cc: Linux USB Mailing List <linux-usb@vger.kernel.org> Acked-By: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210608005344.3762668-1-zenczykowski@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09Merge tag 'usb-v5.13-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: Two bug fixes for cdns3 and cdnsp * tag 'usb-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: cdnsp: Fix deadlock issue in cdnsp_thread_irq_handler usb: cdns3: Enable TDL_CHK only for OUT ep
2021-06-09Merge tag 'usb-serial-5.13-rc5' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Jonah writes: USB-serial fixes for 5.13-rc5 Here's a fix for some pipe-direction mismatches in the quatech2 driver, and a couple of new device ids for ftdi_sio and omninet (and a related trivial cleanup). All but the ftdi_sio commit have been in linux-next, and with no reported issues. * tag 'usb-serial-5.13-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: ftdi_sio: add NovaTech OrionMX product ID USB: serial: omninet: update driver description USB: serial: omninet: add device id for Zyxel Omni 56K Plus USB: serial: quatech2: fix control-request directions
2021-06-05USB: serial: ftdi_sio: add NovaTech OrionMX product IDGeorge McCollister
Add PID for the NovaTech OrionMX so it can be automatically detected. Signed-off-by: George McCollister <george.mccollister@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-06-04USB: UDC: Implement udc_async_callbacks in net2272Alan Stern
This patch adds a udc_async_callbacks handler to the net2272 UDC driver, which will prevent a theoretical race during gadget unbinding. The net2272 driver is sufficiently complicated that I didn't want to mess around with IRQ settings. Instead, the patch simply adds a new flag to control async callbacks, and checks the flag before issuing any of them. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210520202206.GF1216852@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04USB: UDC: Implement udc_async_callbacks in net2280Alan Stern
This patch adds a udc_async_callbacks handler to the net2280 UDC driver, which will prevent a theoretical race during gadget unbinding. The net2280 driver is sufficiently complicated that I didn't want to mess around with IRQ settings. Instead, the patch simply adds a new flag to control async callbacks, and checks the flag before issuing any of them. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210520202200.GE1216852@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04USB: UDC: Implement udc_async_callbacks in dummy-hcdAlan Stern
This patch adds a udc_async_callbacks handler to the dummy-hcd UDC driver, which will prevent a theoretical race during gadget unbinding. The implementation is simple, since dummy-hcd already has a flag to keep track of whether emulated IRQs are enabled. All the handler has to do is store the enable value in the flag, and avoid setting the flag prematurely. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210520202152.GD1216852@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04USB: UDC core: Add udc_async_callbacks gadget opAlan Stern
The Gadget API has a theoretical race when a gadget driver is unbound. Although the pull-up is turned off before the driver's ->unbind callback runs, if the USB cable were to be unplugged at just the wrong moment there would be nothing to prevent the UDC driver from invoking the ->disconnect callback after the unbind has finished. In theory, other asynchronous callbacks could also happen during the time before the UDC driver's udc_stop routine is called, and the gadget driver would not be prepared to handle any of them. We need a way to tell UDC drivers to stop issuing asynchronous (that is, ->suspend, ->resume, ->disconnect, ->reset, or ->setup) callbacks at some point after the pull-up has been turned off and before the ->unbind callback runs. This patch adds a new ->udc_async_callbacks callback to the usb_gadget_ops structure for precisely this purpose, and it adds the corresponding support to the UDC core. Later patches in this series add support for udc_async_callbacks to several UDC drivers. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210520202144.GC1216852@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04usb: gadget: f_fs: Ensure io_completion_wq is idle during unbindWesley Cheng
During unbind, ffs_func_eps_disable() will be executed, resulting in completion callbacks for any pending USB requests. When using AIO, irrespective of the completion status, io_data work is queued to io_completion_wq to evaluate and handle the completed requests. Since work runs asynchronously to the unbind() routine, there can be a scenario where the work runs after the USB gadget has been fully removed, resulting in accessing of a resource which has been already freed. (i.e. usb_ep_free_request() accessing the USB ep structure) Explicitly drain the io_completion_wq, instead of relying on the destroy_workqueue() (in ffs_data_put()) to make sure no pending completion work items are running. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1621644261-1236-1-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04usb: typec: tcpm: cancel send discover hrtimer when unregister tcpm portLi Jun
Like the state_machine_timer, we should also cancel possible pending send discover identity hrtimer when unregister tcpm port. Fixes: c34e85fa69b9 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1622627829-11070-3-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04usb: typec: tcpm: cancel frs hrtimer when unregister tcpm portLi Jun
Like the state_machine_timer, we should also cancel possible pending frs hrtimer when unregister tcpm port. Fixes: 8dc4bd073663 ("usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)") Cc: stable <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1622627829-11070-2-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm portLi Jun
A pending hrtimer may expire after the kthread_worker of tcpm port is destroyed, see below kernel dump when do module unload, fix it by cancel the 2 hrtimers. [ 111.517018] Unable to handle kernel paging request at virtual address ffff8000118cb880 [ 111.518786] blk_update_request: I/O error, dev sda, sector 60061185 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 111.526594] Mem abort info: [ 111.526597] ESR = 0x96000047 [ 111.526600] EC = 0x25: DABT (current EL), IL = 32 bits [ 111.526604] SET = 0, FnV = 0 [ 111.526607] EA = 0, S1PTW = 0 [ 111.526610] Data abort info: [ 111.526612] ISV = 0, ISS = 0x00000047 [ 111.526615] CM = 0, WnR = 1 [ 111.526619] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041d75000 [ 111.526623] [ffff8000118cb880] pgd=10000001bffff003, p4d=10000001bffff003, pud=10000001bfffe003, pmd=10000001bfffa003, pte=0000000000000000 [ 111.526642] Internal error: Oops: 96000047 [#1] PREEMPT SMP [ 111.526647] Modules linked in: dwc3_imx8mp dwc3 phy_fsl_imx8mq_usb [last unloaded: tcpci] [ 111.526663] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc4-00927-gebbe9dbd802c-dirty #36 [ 111.526670] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 111.526674] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO BTYPE=--) [ 111.526681] pc : queued_spin_lock_slowpath+0x1a0/0x390 [ 111.526695] lr : _raw_spin_lock_irqsave+0x88/0xb4 [ 111.526703] sp : ffff800010003e20 [ 111.526706] x29: ffff800010003e20 x28: ffff00017f380180 [ 111.537156] buffer_io_error: 6 callbacks suppressed [ 111.537162] Buffer I/O error on dev sda1, logical block 60040704, async page read [ 111.539932] x27: ffff00017f3801c0 [ 111.539938] x26: ffff800010ba2490 x25: 0000000000000000 x24: 0000000000000001 [ 111.543025] blk_update_request: I/O error, dev sda, sector 60061186 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0 [ 111.548304] [ 111.548306] x23: 00000000000000c0 x22: ffff0000c2a9f184 x21: ffff00017f380180 [ 111.551374] Buffer I/O error on dev sda1, logical block 60040705, async page read [ 111.554499] [ 111.554503] x20: ffff0000c5f14210 x19: 00000000000000c0 x18: 0000000000000000 [ 111.557391] Buffer I/O error on dev sda1, logical block 60040706, async page read [ 111.561218] [ 111.561222] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 111.564205] Buffer I/O error on dev sda1, logical block 60040707, async page read [ 111.570887] x14: 00000000000000f5 x13: 0000000000000001 x12: 0000000000000040 [ 111.570902] x11: ffff0000c05ac6d8 [ 111.583420] Buffer I/O error on dev sda1, logical block 60040708, async page read [ 111.588978] x10: 0000000000000000 x9 : 0000000000040000 [ 111.588988] x8 : 0000000000000000 [ 111.597173] Buffer I/O error on dev sda1, logical block 60040709, async page read [ 111.605766] x7 : ffff00017f384880 x6 : ffff8000118cb880 [ 111.605777] x5 : ffff00017f384880 [ 111.611094] Buffer I/O error on dev sda1, logical block 60040710, async page read [ 111.617086] x4 : 0000000000000000 x3 : ffff0000c2a9f184 [ 111.617096] x2 : ffff8000118cb880 [ 111.622242] Buffer I/O error on dev sda1, logical block 60040711, async page read [ 111.626927] x1 : ffff8000118cb880 x0 : ffff00017f384888 [ 111.626938] Call trace: [ 111.626942] queued_spin_lock_slowpath+0x1a0/0x390 [ 111.795809] kthread_queue_work+0x30/0xc0 [ 111.799828] state_machine_timer_handler+0x20/0x30 [ 111.804624] __hrtimer_run_queues+0x140/0x1e0 [ 111.808990] hrtimer_interrupt+0xec/0x2c0 [ 111.813004] arch_timer_handler_phys+0x38/0x50 [ 111.817456] handle_percpu_devid_irq+0x88/0x150 [ 111.821991] __handle_domain_irq+0x80/0xe0 [ 111.826093] gic_handle_irq+0xc0/0x140 [ 111.829848] el1_irq+0xbc/0x154 [ 111.832991] arch_cpu_idle+0x1c/0x2c [ 111.836572] default_idle_call+0x24/0x6c [ 111.840497] do_idle+0x238/0x2ac [ 111.843729] cpu_startup_entry+0x2c/0x70 [ 111.847657] rest_init+0xdc/0xec [ 111.850890] arch_call_rest_init+0x14/0x20 [ 111.854988] start_kernel+0x508/0x540 [ 111.858659] Code: 910020e0 8b0200c2 f861d884 aa0203e1 (f8246827) [ 111.864760] ---[ end trace 308b9a4a3dcb73ac ]--- [ 111.869381] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 111.876258] SMP: stopping secondary CPUs [ 111.880185] Kernel Offset: disabled [ 111.883673] CPU features: 0x00001001,20000846 [ 111.888031] Memory Limit: none [ 111.891090] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Fixes: 3ed8e1c2ac99 ("usb: typec: tcpm: Migrate workqueue to RT priority for processing events") Cc: stable <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1622627829-11070-1-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04usb: typec: tcpm: Properly handle Alert and Status MessagesKyle Tso
When receiving Alert Message, if it is not unexpected but is unsupported for some reason, the port should return Not_Supported Message response. Also, according to PD3.0 Spec 6.5.2.1.4 Event Flags Field, the OTP/OVP/OCP flags in the Event Flags field in Status Message no longer require Get_PPS_Status Message to clear them. Thus remove it when receiving Status Message with those flags being set. In addition, add the missing AMS operations for Status Message. Fixes: 64f7c494a3c0 ("typec: tcpm: Add support for sink PPS related messages") Fixes: 0908c5aca31e ("usb: typec: tcpm: AMS and Collision Avoidance") Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210531164928.2368606-1-kyletso@google.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabledNeil Armstrong
When only PHY1 is used (for example on Odroid-HC4), the regmap init code uses the usb2 ports when doesn't initialize the PHY1 regmap entry. This fixes: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... pc : regmap_update_bits_base+0x40/0xa0 lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 ... Call trace: regmap_update_bits_base+0x40/0xa0 dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 dwc3_meson_g12a_usb2_init+0x7c/0xc8 dwc3_meson_g12a_usb_init+0x28/0x48 dwc3_meson_g12a_probe+0x298/0x540 platform_probe+0x70/0xe0 really_probe+0xf0/0x4d8 driver_probe_device+0xfc/0x168 ... Fixes: 013af227f58a97 ("usb: dwc3: meson-g12a: handle the phy and glue registers separately") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210601084830.260196-1-narmstrong@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04usb: dwc3: meson-g12a: Disable the regulator in the error handling path of ↵Christophe JAILLET
the probe If an error occurs after a successful 'regulator_enable()' call, 'regulator_disable()' must be called. Fix the error handling path of the probe accordingly. The remove function doesn't need to be fixed, because the 'regulator_disable()' call is already hidden in 'dwc3_meson_g12a_suspend()' which is called via 'pm_runtime_set_suspended()' in the remove function. Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/79df054046224bbb0716a8c5c2082650290eec86.1621616013.git.christophe.jaillet@wanadoo.fr Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04usb: typec: tcpm: Fix misuses of AMS invocationKyle Tso
tcpm_ams_start is used to initiate an AMS as well as checking Collision Avoidance conditions but not for flagging passive AMS (initiated by the port partner). Fix the misuses of tcpm_ams_start in tcpm_pd_svdm. ATTENTION doesn't need responses so the AMS flag is not needed here. Fixes: 0bc3ee92880d ("usb: typec: tcpm: Properly interrupt VDM AMS") Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210601123151.3441914-5-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04usb: typec: tcpm: Introduce snk_vdo_v1 for SVDM version 1.0Kyle Tso
The ID Header VDO and Product VDOs defined in USB PD Spec rev 2.0 and rev 3.1 are quite different. Add an additional array snk_vdo_v1 and send it as the response to the port partner if it only supports SVDM version 1.0. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210601123151.3441914-4-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04usb: typec: tcpm: Correct the responses in SVDM Version 2.0 DFPKyle Tso
In USB PD Spec Rev 3.1 Ver 1.0, section "6.12.5 Applicability of Structured VDM Commands", DFP is allowed and recommended to respond to Discovery Identity with ACK. And in section "6.4.4.2.5.1 Commands other than Attention", NAK should be returned only when receiving Messages with invalid fields, Messages in wrong situation, or unrecognize Messages. Still keep the original design for SVDM Version 1.0 for backward compatibilities. Fixes: 193a68011fdc ("staging: typec: tcpm: Respond to Discover Identity commands") Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210601123151.3441914-2-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04Revert "usb: dwc3: core: Add shutdown callback for dwc3"Alexandru Elisei
This reverts commit 568262bf5492a9bb2fcc4c204b8d38fd6be64e28. The commit causes the following panic when shutting down a rockpro64-v2 board: [..] [ 41.684569] xhci-hcd xhci-hcd.2.auto: USB bus 1 deregistered [ 41.686301] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 41.687096] Mem abort info: [ 41.687345] ESR = 0x96000004 [ 41.687615] EC = 0x25: DABT (current EL), IL = 32 bits [ 41.688082] SET = 0, FnV = 0 [ 41.688352] EA = 0, S1PTW = 0 [ 41.688628] Data abort info: [ 41.688882] ISV = 0, ISS = 0x00000004 [ 41.689219] CM = 0, WnR = 0 [ 41.689481] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000073b2000 [ 41.690046] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000 [ 41.690654] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 41.691143] Modules linked in: [ 41.691416] CPU: 5 PID: 1 Comm: shutdown Not tainted 5.13.0-rc4 #43 [ 41.691966] Hardware name: Pine64 RockPro64 v2.0 (DT) [ 41.692409] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 41.692937] pc : down_read_interruptible+0xec/0x200 [ 41.693373] lr : simple_recursive_removal+0x48/0x280 [ 41.693815] sp : ffff800011fab910 [ 41.694107] x29: ffff800011fab910 x28: ffff0000008fe480 x27: ffff0000008fe4d8 [ 41.694736] x26: ffff800011529a90 x25: 00000000000000a0 x24: ffff800011edd030 [ 41.695364] x23: 0000000000000080 x22: 0000000000000000 x21: ffff800011f23994 [ 41.695992] x20: ffff800011f23998 x19: ffff0000008fe480 x18: ffffffffffffffff [ 41.696620] x17: 000c0400bb44ffff x16: 0000000000000009 x15: ffff800091faba3d [ 41.697248] x14: 0000000000000004 x13: 0000000000000000 x12: 0000000000000020 [ 41.697875] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : 6f6c746364716e62 [ 41.698502] x8 : 7f7f7f7f7f7f7f7f x7 : fefefeff6364626d x6 : 0000000000000440 [ 41.699130] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000000a0 [ 41.699758] x2 : 0000000000000001 x1 : 0000000000000000 x0 : 00000000000000a0 [ 41.700386] Call trace: [ 41.700602] down_read_interruptible+0xec/0x200 [ 41.701003] debugfs_remove+0x5c/0x80 [ 41.701328] dwc3_debugfs_exit+0x1c/0x6c [ 41.701676] dwc3_remove+0x34/0x1a0 [ 41.701988] platform_remove+0x28/0x60 [ 41.702322] __device_release_driver+0x188/0x22c [ 41.702730] device_release_driver+0x2c/0x44 [ 41.703106] bus_remove_device+0x124/0x130 [ 41.703468] device_del+0x16c/0x424 [ 41.703777] platform_device_del.part.0+0x1c/0x90 [ 41.704193] platform_device_unregister+0x28/0x44 [ 41.704608] of_platform_device_destroy+0xe8/0x100 [ 41.705031] device_for_each_child_reverse+0x64/0xb4 [ 41.705470] of_platform_depopulate+0x40/0x84 [ 41.705853] __dwc3_of_simple_teardown+0x20/0xd4 [ 41.706260] dwc3_of_simple_shutdown+0x14/0x20 [ 41.706652] platform_shutdown+0x28/0x40 [ 41.706998] device_shutdown+0x158/0x330 [ 41.707344] kernel_power_off+0x38/0x7c [ 41.707684] __do_sys_reboot+0x16c/0x2a0 [ 41.708029] __arm64_sys_reboot+0x28/0x34 [ 41.708383] invoke_syscall+0x48/0x114 [ 41.708716] el0_svc_common.constprop.0+0x44/0xdc [ 41.709131] do_el0_svc+0x28/0x90 [ 41.709426] el0_svc+0x2c/0x54 [ 41.709698] el0_sync_handler+0xa4/0x130 [ 41.710045] el0_sync+0x198/0x1c0 [ 41.710342] Code: c8047c62 35ffff84 17fffe5f f9800071 (c85ffc60) [ 41.710881] ---[ end trace 406377df5178f75c ]--- [ 41.711299] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 41.712084] Kernel Offset: disabled [ 41.712391] CPU features: 0x10001031,20000846 [ 41.712775] Memory Limit: none [ 41.713049] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- As Felipe explained: "dwc3_shutdown() is just called dwc3_remove() directly, then we end up calling debugfs_remove_recursive() twice." Reverting the commit fixes the panic. Fixes: 568262bf5492 ("usb: dwc3: core: Add shutdown callback for dwc3") Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20210603151742.298243-1-alexandru.elisei@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03usb: dwc3: debugfs: Add and remove endpoint dirs dynamicallyJack Pham
The DWC3 DebugFS directory and files are currently created once during probe. This includes creation of subdirectories for each of the gadget's endpoints. This works fine for peripheral-only controllers, as dwc3_core_init_mode() calls dwc3_gadget_init() just prior to calling dwc3_debugfs_init(). However, for dual-role controllers, dwc3_core_init_mode() will instead call dwc3_drd_init() which is problematic in a few ways. First, the initial state must be determined, then dwc3_set_mode() will have to schedule drd_work and by then dwc3_debugfs_init() could have already been invoked. Even if the initial mode is peripheral, dwc3_gadget_init() happens after the DebugFS files are created, and worse so if the initial state is host and the controller switches to peripheral much later. And secondly, even if the gadget endpoints' debug entries were successfully created, if the controller exits peripheral mode, its dwc3_eps are freed so the debug files would now hold stale references. So it is best if the DebugFS endpoint entries are created and removed dynamically at the same time the underlying dwc3_eps are. Do this by calling dwc3_debugfs_create_endpoint_dir() as each endpoint is created, and conversely remove the DebugFS entry when the endpoint is freed. Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly") Cc: stable <stable@vger.kernel.org> Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210529192932.22912-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03usb: typec: intel_pmc_mux: Update IOM port status offset for AlderLakeAzhar Shaikh
Intel AlderLake(ADL) IOM has a different IOM port status offset than Intel TigerLake. Add a new ACPI ID for ADL and use the IOM port status offset as per the platform. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Link: https://lore.kernel.org/r/20210601035843.71150-1-azhar.shaikh@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03usb: phy: introduce usb_phy device type with its own uevent handlerGrzegorz Jaszczyk
The USB charger type and status was already propagated to userspace through kobject_uevent_env during charger notify work. Nevertheless the uevent could be lost e.g. because it could be fired at an early kernel boot stage, way before udev daemon or any other user-space app was able to catch it. Registering uevent hook for introduced usb_phy_dev_type will allow to query sysfs 'uevent' file to restore that information at any time. Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Link: https://lore.kernel.org/r/20210531122222.453628-1-grzegorz.jaszczyk@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03usb: mtu3: skip getting extcon when use manual drd switchChunfeng Yun
When use manual drd switch, extcon is not used in fact, so no need get it even it exists, just skip it like using role switch. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-5-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03usb: mtu3: use dev_err_probe to print error log about extconChunfeng Yun
Print an error log when the error number is not -EPROBE_DEFER Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03usb: mtu3: dump a status register of IPPCChunfeng Yun
Add a SSUSB_IP_PW_STS1 register to show ip sleep status Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03usb: mtu3: remove repeated setting of speedChunfeng Yun
mtu3_gadget_start() will set speed, no need set it again in mtu3_gadget_set_speed(), just save the desired speed. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03usb: mtu3: remove mtu3_ep0_setup() declaration in mtu3.hChunfeng Yun
It's defined and only used in the same file, so remove its declaration in mtu3.h, and make it static Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-02usb: musb: fix MUSB_QUIRK_B_DISCONNECT_99 handlingThomas Petazzoni
In commit 92af4fc6ec33 ("usb: musb: Fix suspend with devices connected for a64"), the logic to support the MUSB_QUIRK_B_DISCONNECT_99 quirk was modified to only conditionally schedule the musb->irq_work delayed work. This commit badly breaks ECM Gadget on AM335X. Indeed, with this commit, one can observe massive packet loss: $ ping 192.168.0.100 ... 15 packets transmitted, 3 received, 80% packet loss, time 14316ms Reverting this commit brings back a properly functioning ECM Gadget. An analysis of the commit seems to indicate that a mistake was made: the previous code was not falling through into the MUSB_QUIRK_B_INVALID_VBUS_91, but now it is, unless the condition is taken. Changing the logic to be as it was before the problematic commit *and* only conditionally scheduling musb->irq_work resolves the regression: $ ping 192.168.0.100 ... 64 packets transmitted, 64 received, 0% packet loss, time 64475ms Fixes: 92af4fc6ec33 ("usb: musb: Fix suspend with devices connected for a64") Cc: stable@vger.kernel.org Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Drew Fustini <drew@beagleboard.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Link: https://lore.kernel.org/r/20210528140446.278076-1-thomas.petazzoni@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-02usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULLJack Pham
There exists a possible scenario in which dwc3_gadget_init() can fail: during during host -> peripheral mode switch in dwc3_set_mode(), and a pending gadget driver fails to bind. Then, if the DRD undergoes another mode switch from peripheral->host the resulting dwc3_gadget_exit() will attempt to reference an invalid and dangling dwc->gadget pointer as well as call dma_free_coherent() on unmapped DMA pointers. The exact scenario can be reproduced as follows: - Start DWC3 in peripheral mode - Configure ConfigFS gadget with FunctionFS instance (or use g_ffs) - Run FunctionFS userspace application (open EPs, write descriptors, etc) - Bind gadget driver to DWC3's UDC - Switch DWC3 to host mode => dwc3_gadget_exit() is called. usb_del_gadget() will put the ConfigFS driver instance on the gadget_driver_pending_list - Stop FunctionFS application (closes the ep files) - Switch DWC3 to peripheral mode => dwc3_gadget_init() fails as usb_add_gadget() calls check_pending_gadget_drivers() and attempts to rebind the UDC to the ConfigFS gadget but fails with -19 (-ENODEV) because the FFS instance is not in FFS_ACTIVE state (userspace has not re-opened and written the descriptors yet, i.e. desc_ready!=0). - Switch DWC3 back to host mode => dwc3_gadget_exit() is called again, but this time dwc->gadget is invalid. Although it can be argued that userspace should take responsibility for ensuring that the FunctionFS application be ready prior to allowing the composite driver bind to the UDC, failure to do so should not result in a panic from the kernel driver. Fix this by setting dwc->gadget to NULL in the failure path of dwc3_gadget_init() and add a check to dwc3_gadget_exit() to bail out unless the gadget pointer is valid. Fixes: e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically") Cc: <stable@vger.kernel.org> Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210528160405.17550-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-02usb: dwc3: gadget: Disable gadget IRQ during pullup disableWesley Cheng
Current sequence utilizes dwc3_gadget_disable_irq() alongside synchronize_irq() to ensure that no further DWC3 events are generated. However, the dwc3_gadget_disable_irq() API only disables device specific events. Endpoint events can still be generated. Briefly disable the interrupt line, so that the cleanup code can run to prevent device and endpoint events. (i.e. __dwc3_gadget_stop() and dwc3_stop_active_transfers() respectively) Without doing so, it can lead to both the interrupt handler and the pullup disable routine both writing to the GEVNTCOUNT register, which will cause an incorrect count being read from future interrupts. Fixes: ae7e86108b12 ("usb: dwc3: Stop active transfers before halting the controller") Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1621571037-1424-1-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-02usb: dwc3: debugfs: Add and remove endpoint dirs dynamicallyJack Pham
The DWC3 DebugFS directory and files are currently created once during probe. This includes creation of subdirectories for each of the gadget's endpoints. This works fine for peripheral-only controllers, as dwc3_core_init_mode() calls dwc3_gadget_init() just prior to calling dwc3_debugfs_init(). However, for dual-role controllers, dwc3_core_init_mode() will instead call dwc3_drd_init() which is problematic in a few ways. First, the initial state must be determined, then dwc3_set_mode() will have to schedule drd_work and by then dwc3_debugfs_init() could have already been invoked. Even if the initial mode is peripheral, dwc3_gadget_init() happens after the DebugFS files are created, and worse so if the initial state is host and the controller switches to peripheral much later. And secondly, even if the gadget endpoints' debug entries were successfully created, if the controller exits peripheral mode, its dwc3_eps are freed so the debug files would now hold stale references. So it is best if the DebugFS endpoint entries are created and removed dynamically at the same time the underlying dwc3_eps are. Do this by calling dwc3_debugfs_create_endpoint_dir() as each endpoint is created, and conversely remove the DebugFS entry when the endpoint is freed. Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly") Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210529192932.22912-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-02USB: gr_udc: remove dentry storage for debugfs fileGreg Kroah-Hartman
There is no need to store the dentry pointer for a debugfs file that we only use to remove it when the device goes away. debugfs can do the lookup for us instead, saving us some trouble, and making things smaller overall. Cc: Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/20210527101426.3283214-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-02Revert "usb: typec: mux: Remove requirement for the "orientation-switch" ↵Heikki Krogerus
device property" This reverts commit acad3e9c7250c5fd20d9778a163f2adc95de38f5. The device property that can be used to identify the device class/type of the remote port parent when device graph is used is always needed after all. Without it there is no real way to know is the requested connection actually described in the device graph or not. If the connection is described in the device graph but the device instance is still missing for what ever reason, the code defers probe for now. Adding a comment to the code to explain this. Reviewed-by: Li Jun <jun.li@nxp.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210602112253.70200-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-31scsi: core: Kill DRIVER_SENSEHannes Reinecke
Replace the check for DRIVER_SENSE with a check for scsi_status_is_check_condition(). Audit all callsites to ensure the SAM status is set correctly. For backwards compability move the DRIVER_SENSE definition to sg.h, and update sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever SAM_STAT_CHECK_CONDITION is present. [mkp: fix zeroday srp warning] Link: https://lore.kernel.org/r/20210427083046.31620-10-hare@suse.de Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> fix
2021-05-31Merge 5.13-rc4 into usb-nextGreg Kroah-Hartman
We need the usb/thunderbolt fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-31Merge 5.13-rc4 into tty-nextGreg Kroah-Hartman
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27USB: core: Check buffer length matches wLength for control transfersAlan Stern
A type of inconsistency that can show up in control URBs is when the setup packet's wLength value does not match the URB's transfer_buffer_length field. The two should always be equal; differences could lead to information leaks or undefined behavior for OUT transfers or overruns for IN transfers. This patch adds a test for such mismatches during URB submission. If the test fails, the submission is rejected with a -EBADR error code (which is not used elsewhere in the USB core), and a debugging message is logged for people interested in tracking down these errors. Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210526153244.GA1400430@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: gadget: udc: udc-xilinx: Place correct function names into the headersLee Jones
Fixes the following W=1 kernel build warning(s): drivers/usb/gadget/udc/udc-xilinx.c:802: warning: expecting prototype for xudc_ep_enable(). Prototype was for __xudc_ep_enable() instead drivers/usb/gadget/udc/udc-xilinx.c:997: warning: expecting prototype for xudc_ep0_queue(). Prototype was for __xudc_ep0_queue() instead Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-usb@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-20-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: gadget: udc: pxa27x_udc: Fix documentation for 'pxa27x_udc_start()'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/usb/gadget/udc/pxa27x_udc.c:1749: warning: expecting prototype for pxa27x_start(). Prototype was for pxa27x_udc_start() instead Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-usb@vger.kernel.org Acked-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-19-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: typec: ucsi: Fix copy/paste issue for 'ucsi_set_drvdata()'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/usb/typec/ucsi/ucsi.c:1287: warning: expecting prototype for ucsi_get_drvdata(). Prototype was for ucsi_set_drvdata() instead Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-25-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: dwc2: gadget: Repair 'dwc2_hsotg_core_init_disconnected()'s documentationLee Jones
Fixes the following W=1 kernel build warning(s): drivers/usb/dwc2/gadget.c:3349: warning: expecting prototype for dwc2_hsotg_core_init(). Prototype was for dwc2_hsotg_core_init_disconnected() instead Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ben Dooks <ben@simtec.co.uk> Cc: linux-usb@vger.kernel.org Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-16-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: dwc2: pci: Fix possible copy/paste issueLee Jones
Fixes the following W=1 kernel build warning(s): drivers/usb/dwc2/pci.c:73: warning: expecting prototype for dwc2_pci_probe(). Prototype was for dwc2_pci_remove() instead Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-13-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: dwc2: hcd_queue: Fix typeo in function name 'dwc2_hs_pmap_unschedule()'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/usb/dwc2/hcd_queue.c:686: warning: expecting prototype for dwc2_ls_pmap_unschedule(). Prototype was for dwc2_hs_pmap_unschedule() instead Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-12-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: isp1760: isp1760-udc: Provide missing description for 'udc' paramLee Jones
Fixes the following W=1 kernel build warning(s): drivers/usb/isp1760/isp1760-udc.c:150: warning: Function parameter or member 'udc' not described in 'isp1760_udc_select_ep' Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rui Miguel Silva <rui.silva@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: linux-usb@vger.kernel.org Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-7-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: dwc2: params: Fix naming of 'dwc2_get_hwparams()' in the docsLee Jones
Fixes the following W=1 kernel build warning(s): drivers/usb/dwc2/params.c:787: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-6-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: common: ulpi: Add leading underscores for function name ↵Lee Jones
'__ulpi_register_driver()' Fixes the following W=1 kernel build warning(s): drivers/usb/common/ulpi.c:151: warning: expecting prototype for ulpi_register_driver(). Prototype was for __ulpi_register_driver() instead Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-4-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: dwc2: platform: Provide function name for 'dwc2_check_core_version()'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/usb/dwc2/platform.c:411: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matthijs Kooijman <matthijs@stdin.nl> Cc: linux-usb@vger.kernel.org Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-3-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: cdns3: cdnsp-gadget: Provide function name for 'cdnsp_find_next_ext_cap()'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/usb/cdns3/cdnsp-gadget.c:59: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Pawel Laszczak <pawell@cadence.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-24-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-11 16:38:52 +0000