summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2016-10-27USB: OHCI: make ohci-da8xx a separate driverManjunath Goudar
Separate the Davinci OHCI host controller driver from ohci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> [Axel: adapted and rebased, fixed minor comments] Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: usbip:checkpatch; fix bare use of unsignedJai Krishna
This patch fixes the following checkpatch warning for usbip files WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by: Jai Krishna <rjk1024@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb/core: Added devspec sysfs entry for devices behind the usb hubVijay Kumar
Grub finds incorrect of_node path for devices behind usb hub. Added devspec sysfs entry for devices behind usb hub so that right of_node path is returned during grub sysfs walk for these devices. Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27tty: vgacon+sisusb, move scrolldelta to a common helperJiri Slaby
The code is mirrorred in scrolldelta implementations of both vgacon and sisusb. Let's move the code to a separate helper where we will perform a common cleanup and further changes. While we are moving the code, make it linear and save one indentation level. This is done by returning from the "!lines" then-branch immediatelly. This allows flushing the else-branch 1 level to the left, obviously. Few more new lines and comments were added too. And do not forget to export the helper function given sisusb can be built as module. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: <linux-fbdev@vger.kernel.org> Cc: <linux-usb@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27tty: vt, cleanup and document con_scrollJiri Slaby
Scrolling helpers scrup and scrdown both accept 'top' and 'bottom' as unsigned int. Number of lines 'nr' is accepted as int, but all callers pass down unsigned too. So change the type of 'nr' to unsigned too. Now, promote unsigned int from the helpers up to the con_scroll hook which actually accepted all those as signed int. Next, the 'dir' parameter can have only two values and we define constants for that: SM_UP and SM_DOWN. Switch them to enum and do proper type checking on 'dir' too. Finally, document the behaviour of the hook. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: <linux-fbdev@vger.kernel.org> Cc: <linux-usb@vger.kernel.org> Cc: <linux-parisc@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-25usb: chipidea: host: fix NULL ptr dereference during shutdownStefan Wahren
After commit b09b5224fe86 ("usb: chipidea: implement platform shutdown callback") and commit 43a404577a93 ("usb: chipidea: host: set host to be null after hcd is freed") a NULL pointer dereference is caused on i.MX23 during shutdown. So ensure that role is set to CI_ROLE_END and we finish interrupt handling before the hcd is deallocated. This avoids the NULL pointer dereference. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: b09b5224fe86 ("usb: chipidea: implement platform shutdown callback") Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-10-24USB: serial: ch341: add debug output for chip versionAidan Thornton
Will probably be helpful if there are any more compatibility issues. Signed-off-by: Aidan Thornton <makosoft@gmail.com> Reviewed-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-24USB: serial: ch341: add support for parity, frame length, stop bitsAidan Thornton
With the new reinitialization method, configuring parity, different frame lengths and different stop bit settings should work as expected on both CH340G and CH341A. Tested on a loopback-connected CH340G with a logic analyzer in a number of different configurations. Based on a patch by Grigori Goronzy Signed-off-by: Aidan Thornton <makosoft@gmail.com> Reviewed-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-24USB: serial: ch341: reinitialize chip on reconfigurationAidan Thornton
Changing the LCR register after initialization does not seem to be reliable on all chips (particularly not on CH341A). Restructure initialization and configuration to always reinit the chip on configuration changes instead and pass the LCR register value directly to the initialization command. (Note that baud rates above 500kbaud are incorrect, but they're incorrect in the same way both before and after this patch at least on the CH340G. Fixing this isn't a priority as higher baud rates don't seem that reliable anyway.) Cleaned-up version of a patch by Grigori Goronzy Signed-off-by: Aidan Thornton <makosoft@gmail.com> Reviewed-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-24USB: serial: ch341: add register and USB request definitionsAidan Thornton
No functional changes, this just gives names to some registers and USB requests based on Grigori Goronzy's work and WinChipTech's Linux driver (which reassuringly agree), then uses them in place of magic numbers. This also renames the misnamed BREAK2 register (actually UART config) Signed-off-by: Aidan Thornton <makosoft@gmail.com> Reviewed-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-24usb: ohci-da8xx: Remove code that references machDavid Lechner
Including mach/* is frowned upon in device drivers, so get rid of it. This replaces usb20_clk and code that pokes CFGCHIP2 with a proper phy driver. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24hwrng: chaoskey - drop workaround for old hwrng core limitationJulien Cristau
The hwrng core used to mask 'quality' with 1023; that has been removed in commit 506bf0c0464ace57169aadcf02ae397999c57bdd ("hwrng: core - allow perfect entropy from hardware devices"), so we can now just set quality to 1024. Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24usb: ohci-at91: Use descriptor-based gpio APIsWenyou Yang
Use the descriptor-based interface to manipulate GPIOs, instead of the legacy integer-based interface. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24USB: EHCI: merge all cases that disable the IO watchdogLucas Stach
This merges the vendor NEC case with the INTEL and AMD one, as those 3 do exactly the same thing: disabling of the IO watchdog. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24USB: EHCI: elide I/O watchdog on AMD partsLucas Stach
This removes 10 timer wakeups per second. I'm running this patch for a while now and haven't spotted any adverse effects. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24usb: Convert pr_warning to pr_warnJoe Perches
Use the more common logging mechanism. Miscellanea: o Realign multiline statements o Coalesce format Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24usbtmc: Add, clarify and fix commentsDave Penkler
Add information regarding lifespan of kref protection: Clarify comment on kref_get for interrupt in urb in usbtmc_probe() Add comment on kref_get in usbtmc_open() Fix endpoint reference in documentation for send_request_dev_dep_msg_in() Signed-off-by: Dave Penkler <dpenkler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24usb: renesas_usbhs: add wait after initialization for R-Car Gen3Yoshihiro Shimoda
Since the controller on R-Car Gen3 doesn't have any status registers to detect initialization (LPSTS.SUSPM = 1) and the initialization needs up to 45 usec, this patch adds wait after the initialization. Otherwise, writing other registers (e.g. INTENB0) will fail. Fixes: de18757e272d ("usb: renesas_usbhs: add R-Car Gen3 power control") Cc: <stable@vger.kernel.org> # v4.6+ Cc: <balbi@kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24usb: increase ohci watchdog delay to 275 msecBryan Paluch
Increase ohci watchout delay to 275 ms. Previous delay was 250 ms with 20 ms of slack, after removing slack time some ohci controllers don't respond in time. Logs from systems with controllers that have the issue would show "HcDoneHead not written back; disabled" Signed-off-by: Bryan Paluch <bryanpaluch@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24usb: musb: Call pm_runtime from musb_gadget_queueTony Lindgren
If we're booting pandaboard using NFSroot over built-in g_ether, we can get the following after booting once and doing a warm reset: g_ether gadget: ecm_open g_ether gadget: notify connect true ... WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x220/0x34c 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4CFG (Read): Data Access in User mode du ring Functional access ... Fix the issue by calling pm_runtime functions from musb_gadget_queue. Note that in the long run we should be able to queue the pending transfers if pm_runtime is not active, and flush the queue from pm_runtime_resume. Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24usb: musb: Fix hardirq-safe hardirq-unsafe lock order errorTony Lindgren
If we configure musb with 2430 glue as a peripheral, and then rmmod omap2430 module, we'll get the following error: [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] ... rmmod/413 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (&phy->mutex){+.+.+.}, at: [<c04b9fd0>] phy_power_off+0x1c/0xb8 [ 204.678710] and this task is already holding: (&(&musb->lock)->rlock){-.-...}, at: [<bf3a482c>] musb_gadget_stop+0x24/0xec [musb_hdrc] which would create a new lock dependency: (&(&musb->lock)->rlock){-.-...} -> (&phy->mutex){+.+.+.} ... This is because some glue layers expect musb_platform_enable/disable to be called with spinlock held, and 2430 glue layer has USB PHY on the I2C bus using a mutex. We could fix the glue layers to take the spinlock, but we still have a problem of musb_plaform_enable/disable being called in an unbalanced manner. So that would still lead into USB PHY enable/disable related problems for omap2430 glue layer. While it makes sense to only enable USB PHY when needed from PM point of view, in this case we just can't do it yet without breaking things. So let's just revert phy_enable/disable related changes instead and reconsider this after we have fixed musb_platform_enable/disable to be balanced. Fixes: a83e17d0f73b ("usb: musb: Improve PM runtime and phy handling for 2430 glue layer") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24usb: ehci-platform: increase EHCI_MAX_RSTS to 4Masahiro Yamada
Socionext LD11 SoC (arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi) needs to handle 4 reset lines for EHCI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24usb: ohci-at91: Set RemoteWakeupConnected bit explicitly.Wenyou Yang
The reset value of RWC is 0, set RemoteWakeupConnected bit explicitly before calling ohci_run, it also fixes the issue that the mass storage stick connected wasn't suspended when the system suspend. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24USB: serial: cp210x: use bool for registered flagJohan Hovold
Use bool rather than u8 for the gpio-chip-registered flag. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-24USB: serial: cp210x: Adding GPIO support for CP2105Martyn Welch
This patch adds support for the GPIO found on the CP2105. Unlike the GPIO provided by some of the other devices supported by the cp210x driver, the GPIO on the CP2015 is muxed on pins otherwise used for serial control lines. The GPIO have been configured in 2 separate banks as the choice to configure the pins for GPIO is made separately for pins shared with each of the 2 serial ports this device provides, though the choice is made for all pins associated with that port in one go. The choice of whether to use the pins for GPIO or serial is made by adding configuration to a one-time programable PROM in the chip and can not be changed at runtime. The device defaults to GPIO. This device supports either push-pull or open-drain modes, it doesn't provide an explicit input mode, though the state of the GPIO can be read when used in open-drain mode. Like with pin use, the mode is configured in the one-time programable PROM and can't be changed at runtime. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-24USB: serial: cp210x: return -EIO on short control transfersJohan Hovold
Return -EIO on short control transfers rather than -EPROTO which is used for lower-level transfer errors. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-24USB: serial: cp210x: clean up CSIZE handlingJohan Hovold
CSIZE is two-bit wide and only CS5 through CS8 are possible values. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-22Merge tag 'usb-serial-4.9-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.9-rc2 Here's a fix for a NULL-deref during probe which could be triggered by a malicious device, and a fix for some missing error handling in cp210x that also leaked some bits from the stack. Included is also a new device id for ftdi_sio. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-21USB: serial: fix potential NULL-dereference at probeJohan Hovold
Make sure we have at least one port before attempting to register a console. Currently, at least one driver binds to a "dummy" interface and requests zero ports for it. Should such an interface also lack endpoints, we get a NULL-deref during probe. Fixes: e5b1e2062e05 ("USB: serial: make minor allocation dynamic") Cc: stable <stable@vger.kernel.org> # 3.11 Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-20net: use core MTU range checking in misc driversJarod Wilson
firewire-net: - set min/max_mtu - remove fwnet_change_mtu nes: - set max_mtu - clean up nes_netdev_change_mtu xpnet: - set min/max_mtu - remove xpnet_dev_change_mtu hippi: - set min/max_mtu - remove hippi_change_mtu batman-adv: - set max_mtu - remove batadv_interface_change_mtu - initialization is a little async, not 100% certain that max_mtu is set in the optimal place, don't have hardware to test with rionet: - set min/max_mtu - remove rionet_change_mtu slip: - set min/max_mtu - streamline sl_change_mtu um/net_kern: - remove pointless ndo_change_mtu hsi/clients/ssi_protocol: - use core MTU range checking - remove now redundant ssip_pn_set_mtu ipoib: - set a default max MTU value - Note: ipoib's actual max MTU can vary, depending on if the device is in connected mode or not, so we'll just set the max_mtu value to the max possible, and let the ndo_change_mtu function continue to validate any new MTU change requests with checks for CM or not. Note that ipoib has no min_mtu set, and thus, the network core's mtu > 0 check is the only lower bounds here. mptlan: - use net core MTU range checking - remove now redundant mpt_lan_change_mtu fddi: - min_mtu = 21, max_mtu = 4470 - remove now redundant fddi_change_mtu (including export) fjes: - min_mtu = 8192, max_mtu = 65536 - The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to get past the core net MTU range checks so fjes_change_mtu can validate a new MTU against what it supports (see fjes_support_mtu in fjes_hw.c) hsr: - min_mtu = 0 (calls ether_setup, max_mtu is 1500) f_phonet: - min_mtu = 6, max_mtu = 65541 u_ether: - min_mtu = 14, max_mtu = 15412 phonet/pep-gprs: - min_mtu = 576, max_mtu = 65530 - remove redundant gprs_set_mtu CC: netdev@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: Stefan Richter <stefanr@s5r6.in-berlin.de> CC: Faisal Latif <faisal.latif@intel.com> CC: linux-rdma@vger.kernel.org CC: Cliff Whickman <cpw@sgi.com> CC: Robin Holt <robinmholt@gmail.com> CC: Jes Sorensen <jes@trained-monkey.org> CC: Marek Lindner <mareklindner@neomailbox.ch> CC: Simon Wunderlich <sw@simonwunderlich.de> CC: Antonio Quartulli <a@unstable.cc> CC: Sathya Prakash <sathya.prakash@broadcom.com> CC: Chaitra P B <chaitra.basappa@broadcom.com> CC: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> CC: MPT-FusionLinux.pdl@broadcom.com CC: Sebastian Reichel <sre@kernel.org> CC: Felipe Balbi <balbi@kernel.org> CC: Arvid Brodin <arvid.brodin@alten.se> CC: Remi Denis-Courmont <courmisch@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20xhci: use default USB_RESUME_TIMEOUT when resuming ports.Mathias Nyman
USB2 host inititated resume, and system suspend bus resume need to use the same USB_RESUME_TIMEOUT as elsewhere. This resolves a device disconnect issue at system resume seen on Intel Braswell and Apollolake, but is in no way limited to those platforms. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-20xhci: workaround for hosts missing CAS bitMathias Nyman
If a device is unplugged and replugged during Sx system suspend some Intel xHC hosts will overwrite the CAS (Cold attach status) flag and no device connection is noticed in resume. A device in this state can be identified in resume if its link state is in polling or compliance mode, and the current connect status is 0. A device in this state needs to be warm reset. Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 Observed on Cherryview and Apollolake as they go into compliance mode if LFPS times out during polling, and re-plugged devices are not discovered at resume. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-20xhci: add restart quirk for Intel Wildcatpoint PCHMathias Nyman
xHC in Wildcatpoint-LP PCH is similar to LynxPoint-LP and need the same quirks to prevent machines from spurious restart while shutting them down. Reported-by: Hasan Mahmood <hasan.mahm@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-20USB: serial: cp210x: fix tiocmget error handlingJohan Hovold
The current tiocmget implementation would fail to report errors up the stack and instead leaked a few bits from the stack as a mask of modem-status flags. Fixes: 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-19wusb: fix error return code in wusb_prf()Wei Yongjun
Fix to return error code -ENOMEM from the kmalloc() error handling case instead of 0, as done elsewhere in this function. Fixes: a19b882c07a6 ("wusb: Stop using the stack for sg crypto scratch space") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-19Merge tag 'fixes-for-v4.9-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.9-rc2 First set of fixes for v4.9-rc cycle. Nothing major this time around. The most important patches are the 3 fixes in dwc3 (dma_free_coheren() size fix, queued request accounting fix and Isochronous StartTransfer fix) and the 3 reverts on dwc2. We're also including the late atmel UDC fix which didn't make it into v4.8-final.
2016-10-18Revert "usb: dwc2: gadget: fix TX FIFO size and address initialization"John Youn
This reverts commit aa381a7259c3 ("usb: dwc2: gadget: fix TX FIFO size and address initialization"). The original commit removed the FIFO size programming per endpoint. The DPTXFSIZn register is also used for DIEPTXFn and the SIZE field is r/w in dedicated fifo mode. So it isn't appropriate to simply remove this initialization as it might break existing behavior. Also, some cores might not have enough fifo space to handle the programming method used in the reverted patch, resulting in fifo initialization failure. Signed-off-by: John Youn <johnyoun@synopsys.com> Cc: Robert Baldyga <r.baldyga@samsung.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-18Revert "usb: dwc2: gadget: change variable name to more meaningful"John Youn
This reverts commit ba48eab8866c ("usb: dwc2: gadget: change variable name to more meaningful"). This is needed to cleanly revert commit aa381a7259c3 ("usb: dwc2: gadget: fix TX FIFO size and address initialization") which may cause regressions on some platforms. Signed-off-by: John Youn <johnyoun@synopsys.com> Cc: Robert Baldyga <r.baldyga@samsung.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-17USB: serial: ftdi_sio: add support for Infineon TriBoard TC2X7Stefan Tauner
This adds support to ftdi_sio for the Infineon TriBoard TC2X7 engineering board for first-generation Aurix SoCs with Tricore CPUs. Mere addition of the device IDs does the job. Signed-off-by: Stefan Tauner <stefan.tauner@technikum-wien.at> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-17wusb: Stop using the stack for sg crypto scratch spaceAndy Lutomirski
Pointing an sg list at the stack is verboten and, with CONFIG_VMAP_STACK=y, will malfunction. Use kmalloc for the wusb crypto stack space instead. Untested -- I'm not entirely convinced that this hardware exists in the wild. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-17usb: dwc3: Fix size used in dma_free_coherent()Christophe JAILLET
In commit 2abd9d5fa60f9 ("usb: dwc3: ep0: Add chained TRB support"), the size of the memory allocated with 'dma_alloc_coherent()' has been modified but the corresponding calls to 'dma_free_coherent()' have not been updated accordingly. This has been spotted with coccinelle, using the following script: //////////////////// @r@ expression x0, x1, y0, y1, z0, z1, t0, t1, ret; @@ * ret = dma_alloc_coherent(x0, y0, z0, t0); ... * dma_free_coherent(x1, y1, ret, t1); @script:python@ y0 << r.y0; y1 << r.y1; @@ if y1.find(y0) == -1: print "WARNING: sizes look different: '%s' vs '%s'" % (y0, y1) //////////////////// Fixes: 2abd9d5fa60f9 ("usb: dwc3: ep0: Add chained TRB support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-17usb: gadget: f_fs: stop sleeping in ffs_func_eps_disableMichal Nazarewicz
ffs_func_eps_disable is called from atomic context so it cannot sleep thus cannot grab a mutex. Change the handling of epfile->read_buffer to use non-sleeping synchronisation method. Reported-by: Chen Yu <chenyu56@huawei.com> Signed-off-by: Michał Nazarewicz <mina86@mina86.com> Fixes: 9353afbbfa7b ("buffer data from ‘oversized’ OUT requests") Tested-by: John Stultz <john.stultz@linaro.org> Tested-by: Chen Yu <chenyu56@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-17usb: gadget: f_fs: edit epfile->ep under lockMichal Nazarewicz
epfile->ep is protected by ffs->eps_lock (not epfile->mutex) so clear it while holding the spin lock. Tested-by: John Stultz <john.stultz@linaro.org> Tested-by: Chen Yu <chenyu56@huawei.com> Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-17usb: dwc2: Add msleep for host-onlyHeiko Stuebner
Although a host-only controller should not have any associated delay, some rockchip SOC platforms will not show the correct host-values of registers until after a delay. So add a 50 ms sleep when in host-only mode. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-17usb: dwc3: gadget: never pre-start Isochronous endpointsFelipe Balbi
We cannot pre-start isochronous endpoints because we rely on the micro-frame number passed via XferNotReady command for proper Isochronous scheduling. Fixes: 08a36b543803 ("usb: dwc3: gadget: simplify __dwc3_gadget_ep_queue()") Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-17usb: dwc3: gadget: properly account queued requestsFelipe Balbi
Some requests could be accounted for multiple times. Let's fix that so each and every requests is accounted for only once. Cc: <stable@vger.kernel.org> # v4.8 Fixes: 55a0237f8f47 ("usb: dwc3: gadget: use allocated/queued reqs for LST bit") Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-17usb: gadget: function: u_ether: don't starve tx request queueFelipe Balbi
If we don't guarantee that we will always get an interrupt at least when we're queueing our very last request, we could fall into situation where we queue every request with 'no_interrupt' set. This will cause the link to get stuck. The behavior above has been triggered with g_ether and dwc3. Cc: <stable@vger.kernel.org> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-17usb: gadget: udc: atmel: fix endpoint nameAlexandre Belloni
Since commit c32b5bcfa3c4 ("ARM: dts: at91: Fix USB endpoint nodes"), atmel_usba_udc fails with: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at include/linux/usb/gadget.h:405 ecm_do_notify+0x188/0x1a0 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.7.0+ #15 Hardware name: Atmel SAMA5 [<c010ccfc>] (unwind_backtrace) from [<c010a7ec>] (show_stack+0x10/0x14) [<c010a7ec>] (show_stack) from [<c0115c10>] (__warn+0xe4/0xfc) [<c0115c10>] (__warn) from [<c0115cd8>] (warn_slowpath_null+0x20/0x28) [<c0115cd8>] (warn_slowpath_null) from [<c04377ac>] (ecm_do_notify+0x188/0x1a0) [<c04377ac>] (ecm_do_notify) from [<c04379a4>] (ecm_set_alt+0x74/0x1ac) [<c04379a4>] (ecm_set_alt) from [<c042f74c>] (composite_setup+0xfc0/0x19f8) [<c042f74c>] (composite_setup) from [<c04356e8>] (usba_udc_irq+0x8f4/0xd9c) [<c04356e8>] (usba_udc_irq) from [<c013ec9c>] (handle_irq_event_percpu+0x9c/0x158) [<c013ec9c>] (handle_irq_event_percpu) from [<c013ed80>] (handle_irq_event+0x28/0x3c) [<c013ed80>] (handle_irq_event) from [<c01416d4>] (handle_fasteoi_irq+0xa0/0x168) [<c01416d4>] (handle_fasteoi_irq) from [<c013e3f8>] (generic_handle_irq+0x24/0x34) [<c013e3f8>] (generic_handle_irq) from [<c013e640>] (__handle_domain_irq+0x54/0xa8) [<c013e640>] (__handle_domain_irq) from [<c010b214>] (__irq_svc+0x54/0x70) [<c010b214>] (__irq_svc) from [<c0107eb0>] (arch_cpu_idle+0x38/0x3c) [<c0107eb0>] (arch_cpu_idle) from [<c0137300>] (cpu_startup_entry+0x9c/0xdc) [<c0137300>] (cpu_startup_entry) from [<c0900c40>] (start_kernel+0x354/0x360) [<c0900c40>] (start_kernel) from [<20008078>] (0x20008078) ---[ end trace e7cf9dcebf4815a6 ]--- Fixes: c32b5bcfa3c4 ("ARM: dts: at91: Fix USB endpoint nodes") Cc: <stable@vger.kernel.org> Reported-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ...
2016-10-11treewide: remove redundant #include <linux/kconfig.h>Masahiro Yamada
Kernel source files need not include <linux/kconfig.h> explicitly because the top Makefile forces to include it with: -include $(srctree)/include/linux/kconfig.h This commit removes explicit includes except the following: * arch/s390/include/asm/facilities_src.h * tools/testing/radix-tree/linux/kernel.h These two are used for host programs. Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-16 16:54:23 +0000