summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2017-03-23USB: ftdi-elan: refactor endpoint retrievalJohan Hovold
Use the new endpoint helpers to lookup the required bulk-in and bulk-out endpoints. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: chaoskey: refactor endpoint retrievalJohan Hovold
Use the new endpoint helpers to lookup the required bulk-in endpoint. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: appledisplay: refactor endpoint retrievalJohan Hovold
Use the new endpoint helpers to lookup the required interrupt-in endpoint. Note that the default retval was never used. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: adutux: refactor endpoint retrievalJohan Hovold
Use the new endpoint helpers to lookup the required interrupt-in and interrupt-out endpoints. Note that the descriptors are searched in reverse order to avoid any regressions. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: adutux: fix up error pathsJohan Hovold
Make sure to return -ENOMEM on all allocation failures and -EIO on a string-retrieval error (instead of returning -ENODEV for some such errors). Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: adutux: drop redundant sanity checkJohan Hovold
Drop a redundant sanity check for a NULL parent usb device, which is never true. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: core: add helpers to retrieve endpoints in reverse orderJohan Hovold
Several drivers have implemented their endpoint look-up loops in such a way that they have picked the last endpoint descriptor of the specified type should more than one such descriptor exist. To avoid any regressions, add corresponding helpers to lookup endpoints by searching the endpoint descriptors in reverse order. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: core: add helpers to retrieve endpointsJohan Hovold
Many USB drivers iterate over the available endpoints to find required endpoints of a specific type and direction. Typically the endpoints are required for proper function and a missing endpoint should abort probe. To facilitate code reuse, add a helper to retrieve common endpoints (bulk or interrupt, in or out) and four wrappers to find a single endpoint. Note that the helpers are marked as __must_check to serve as a reminder to always verify that all expected endpoints are indeed present. This also means that any optional endpoints, typically need to be looked up through separate calls. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23usb: phy: Remove unused configBaolin Wang
Since the old common Samsung USB PHY code has been removed by commit ea2fdf8423 ("usb: phy: samsung: remove old common USB PHY code"), thus remove the unused config. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHYHeikki Krogerus
This adds driver for the USB Type-C PHY on Intel WhiskeyCove PMIC which is available on some of the Intel Broxton SoC based platforms. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-and-Tested-by: Felipe Balbi <felipe.balbi@linux.intel.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23usb: USB Type-C connector classHeikki Krogerus
The purpose of USB Type-C connector class is to provide unified interface for the user space to get the status and basic information about USB Type-C connectors on a system, control over data role swapping, and when the port supports USB Power Delivery, also control over power role swapping and Alternate Modes. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-and-Tested-by: Felipe Balbi <felipe.balbi@linux.intel.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23usb: dwc3: pci: Switch to devm_acpi_dev_add_driver_gpios()Andy Shevchenko
Switch to use managed variant of acpi_dev_add_driver_gpios() to simplify error path and fix potentially wrong assignment if ->probe() fails. While here, add a debug message in case assignment fails to allow user see the cause of a potential issue. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23usb: ehci: use bus->sysdev for DMA configurationPeter Chen
Set the dma for ehci from sysdev. The sysdev is pointing to device that is known to the system firmware or hardware. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23usb: xhci: use bus->sysdev for DMA configurationArnd Bergmann
For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. So, set the dma for xhci from sysdev. sysdev is pointing to device that is known to the system firmware or hardware. Cc: Baolin Wang <baolin.wang@linaro.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23usb: ehci: fsl: use bus->sysdev for DMA configurationArnd Bergmann
For the dual role ehci fsl driver, sysdev will handle the dma config. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23usb: chipidea: use bus->sysdev for DMA configurationArnd Bergmann
Set the dma for chipidea from sysdev. This is inherited from its parent node. Also, do not set dma mask for child as it is not required now. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23usb: separate out sysdev pointer from usb_busArnd Bergmann
For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23usb: hub: Do not attempt to autosuspend disconnected devicesGuenter Roeck
While running a bind/unbind stress test with the dwc3 usb driver on rk3399, the following crash was observed. Unable to handle kernel NULL pointer dereference at virtual address 00000218 pgd = ffffffc00165f000 [00000218] *pgd=000000000174f003, *pud=000000000174f003, *pmd=0000000001750003, *pte=00e8000001751713 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat rfcomm xt_mark fuse bridge stp llc zram btusb btrtl btbcm btintel bluetooth ip6table_filter mwifiex_pcie mwifiex cfg80211 cdc_ether usbnet r8152 mii joydev snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun CPU: 1 PID: 29814 Comm: kworker/1:1 Not tainted 4.4.52 #507 Hardware name: Google Kevin (DT) Workqueue: pm pm_runtime_work task: ffffffc0ac540000 ti: ffffffc0af4d4000 task.ti: ffffffc0af4d4000 PC is at autosuspend_check+0x74/0x174 LR is at autosuspend_check+0x70/0x174 ... Call trace: [<ffffffc00080dcc0>] autosuspend_check+0x74/0x174 [<ffffffc000810500>] usb_runtime_idle+0x20/0x40 [<ffffffc000785ae0>] __rpm_callback+0x48/0x7c [<ffffffc000786af0>] rpm_idle+0x1e8/0x498 [<ffffffc000787cdc>] pm_runtime_work+0x88/0xcc [<ffffffc000249bb8>] process_one_work+0x390/0x6b8 [<ffffffc00024abcc>] worker_thread+0x480/0x610 [<ffffffc000251a80>] kthread+0x164/0x178 [<ffffffc0002045d0>] ret_from_fork+0x10/0x40 Source: (gdb) l *0xffffffc00080dcc0 0xffffffc00080dcc0 is in autosuspend_check (drivers/usb/core/driver.c:1778). 1773 /* We don't need to check interfaces that are 1774 * disabled for runtime PM. Either they are unbound 1775 * or else their drivers don't support autosuspend 1776 * and so they are permanently active. 1777 */ 1778 if (intf->dev.power.disable_depth) 1779 continue; 1780 if (atomic_read(&intf->dev.power.usage_count) > 0) 1781 return -EBUSY; 1782 w |= intf->needs_remote_wakeup; Code analysis shows that intf is set to NULL in usb_disable_device() prior to setting actconfig to NULL. At the same time, usb_runtime_idle() does not lock the usb device, and neither does any of the functions in the traceback. This means that there is no protection against a race condition where usb_disable_device() is removing dev->actconfig->interface[] pointers while those are being accessed from autosuspend_check(). To solve the problem, synchronize and validate device state between autosuspend_check() and usb_disconnect(). Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23usb: hub: Fix error loop seen after hub communication errorsGuenter Roeck
While stress testing a usb controller using a bind/unbind looop, the following error loop was observed. usb 7-1.2: new low-speed USB device number 3 using xhci-hcd usb 7-1.2: hub failed to enable device, error -108 usb 7-1-port2: cannot disable (err = -22) usb 7-1-port2: couldn't allocate usb_device usb 7-1-port2: cannot disable (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) ** 57 printk messages dropped ** hub 7-1:1.0: activate --> -22 ** 82 printk messages dropped ** hub 7-1:1.0: hub_ext_port_status failed (err = -22) This continues forever. After adding tracebacks into the code, the call sequence leading to this is found to be as follows. [<ffffffc0007fc8e0>] hub_activate+0x368/0x7b8 [<ffffffc0007fceb4>] hub_resume+0x2c/0x3c [<ffffffc00080b3b8>] usb_resume_interface.isra.6+0x128/0x158 [<ffffffc00080b5d0>] usb_suspend_both+0x1e8/0x288 [<ffffffc00080c9c4>] usb_runtime_suspend+0x3c/0x98 [<ffffffc0007820a0>] __rpm_callback+0x48/0x7c [<ffffffc00078217c>] rpm_callback+0xa8/0xd4 [<ffffffc000786234>] rpm_suspend+0x84/0x758 [<ffffffc000786ca4>] rpm_idle+0x2c8/0x498 [<ffffffc000786ed4>] __pm_runtime_idle+0x60/0xac [<ffffffc00080eba8>] usb_autopm_put_interface+0x6c/0x7c [<ffffffc000803798>] hub_event+0x10ac/0x12ac [<ffffffc000249bb8>] process_one_work+0x390/0x6b8 [<ffffffc00024abcc>] worker_thread+0x480/0x610 [<ffffffc000251a80>] kthread+0x164/0x178 [<ffffffc0002045d0>] ret_from_fork+0x10/0x40 kick_hub_wq() is called from hub_activate() even after failures to communicate with the hub. This results in an endless sequence of hub event -> hub activate -> wq trigger -> hub event -> ... Provide two solutions for the problem. - Only trigger the hub event queue if communication with the hub is successful. - After a suspend failure, only resume already suspended interfaces if the communication with the device is still possible. Each of the changes fixes the observed problem. Use both to improve robustness. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23ohci-pci: add qemu quirkGerd Hoffmann
On a loaded virtualization host (dozen guests booting at the same time) it may happen that the ohci controller emulation doesn't manage to do timely frame processing, with the result that the io watchdog fires and considers the controller being dead, even though it's only the emulation being unusual slow due to the load peak. So, add a quirk for qemu and don't use the watchdog in case we figure we are running on emulated ohci. The virtual ohci controller masquerades as apple ohci controller, but we can identify it by subsystem id. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-22of: Add function for generating a DT modalias with a newlineRob Herring
The modalias sysfs attr is lacking a newline for DT aliases on platform devices. The macio and ibmebus correctly add the newline, but open code it. Introduce a new function, of_device_modalias(), that fills the buffer with the modalias including the newline and update users of the old of_device_get_modalias function. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Frank Rowand <frowand.list@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-22usb: gadget: f_hid: fix: Don't access hidg->req without spinlock heldKrzysztof Opasiak
hidg->req should be accessed only with write_spinlock held as it is set to NULL when we get disabled by host. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-22usb: gadget: udc: remove pointer dereference after freeGustavo A. R. Silva
Remove pointer dereference after free. Addresses-Coverity-ID: 1091173 Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-22usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeedRoger Quadros
As per USB3.0 Specification "Table 9-20. Standard Endpoint Descriptor", for interrupt and isochronous endpoints, wMaxPacketSize must be set to 1024 if the endpoint defines bMaxBurst to be greater than zero. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-22usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerIntervalRoger Quadros
The streaming_maxburst module parameter is 0 offset (0..15) so we must add 1 while using it for wBytesPerInterval calculation for the SuperSpeed companion descriptor. Without this host uvcvideo driver will always see the wrong wBytesPerInterval for SuperSpeed uvc gadget and may not find a suitable video interface endpoint. e.g. for streaming_maxburst = 0 case it will always fail as wBytePerInterval was evaluating to 0. Cc: stable@vger.kernel.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-22usb: gadget: acm: fix endianness in notificationsOliver Neukum
The gadget code exports the bitfield for serial status changes over the wire in its internal endianness. The fix is to convert to little endian before sending it over the wire. Signed-off-by: Oliver Neukum <oneukum@suse.com> Tested-by: 家瑋 <momo1208@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-22usb: dwc3: gadget: delay unmap of bounced requestsJanusz Dziedzic
In the case of bounced ep0 requests, we must delay DMA operation until after ->complete() otherwise we might overwrite contents of req->buf. This caused problems with RNDIS gadget. Signed-off-by: Janusz Dziedzic <januszx.dziedzic@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-21usb/serial: Add DBC debug device support to usb_debugLu Baolu
This patch adds DBC debug device support to the usb_debug driver. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Johan Hovold <johan@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/1490083293-3792-5-git-send-email-baolu.lu@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-21usb/early: Add driver for xhci debug capabilityLu Baolu
XHCI debug capability (DbC) is an optional but standalone functionality provided by an xHCI host controller. Software learns this capability by walking through the extended capability list of the host. XHCI specification describes DbC in section 7.6. This patch introduces the code to probe and initialize the debug capability hardware during early boot. With hardware initialized, the debug target (system on which this code is running) will present a debug device through the debug port (normally the first USB3 port). The debug device is fully compliant with the USB framework and provides the equivalent of a very high performance (USB3) full-duplex serial link between the debug host and target. The DbC functionality is independent of the xHCI host. There isn't any precondition from the xHCI host side for the DbC to work. One use for this feature is kernel debugging, for example when your machine crashes very early before the regular console code is initialized. Other uses include simpler, lockless logging instead of a full-blown printk console driver and klogd. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/1490083293-3792-3-git-send-email-baolu.lu@linux.intel.com [ Small fix to the Kconfig help text. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-18USB: serial: qcserial: add Dell DW5811eBjørn Mork
This is a Dell branded Sierra Wireless EM7455. Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-17usb: hub: Fix crash after failure to read BOS descriptorGuenter Roeck
If usb_get_bos_descriptor() returns an error, usb->bos will be NULL. Nevertheless, it is dereferenced unconditionally in hub_set_initial_usb2_lpm_policy() if usb2_hw_lpm_capable is set. This results in a crash. usb 5-1: unable to get BOS descriptor ... Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = ffffffc00165f000 [00000008] *pgd=000000000174f003, *pud=000000000174f003, *pmd=0000000001750003, *pte=00e8000001751713 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac [ ... ] CPU: 5 PID: 3353 Comm: kworker/5:3 Tainted: G B 4.4.52 #480 Hardware name: Google Kevin (DT) Workqueue: events driver_set_config_work task: ffffffc0c3690000 ti: ffffffc0ae9a8000 task.ti: ffffffc0ae9a8000 PC is at hub_port_init+0xc3c/0xd10 LR is at hub_port_init+0xc3c/0xd10 ... Call trace: [<ffffffc0007fbbfc>] hub_port_init+0xc3c/0xd10 [<ffffffc0007fbe2c>] usb_reset_and_verify_device+0x15c/0x82c [<ffffffc0007fc5e0>] usb_reset_device+0xe4/0x298 [<ffffffbffc0e3fcc>] rtl8152_probe+0x84/0x9b0 [r8152] [<ffffffc00080ca8c>] usb_probe_interface+0x244/0x2f8 [<ffffffc000774a24>] driver_probe_device+0x180/0x3b4 [<ffffffc000774e48>] __device_attach_driver+0xb4/0xe0 [<ffffffc000772168>] bus_for_each_drv+0xb4/0xe4 [<ffffffc0007747ec>] __device_attach+0xd0/0x158 [<ffffffc000775080>] device_initial_probe+0x24/0x30 [<ffffffc0007739d4>] bus_probe_device+0x50/0xe4 [<ffffffc000770bd0>] device_add+0x414/0x738 [<ffffffc000809fe8>] usb_set_configuration+0x89c/0x914 [<ffffffc00080a120>] driver_set_config_work+0xc0/0xf0 [<ffffffc000249bb8>] process_one_work+0x390/0x6b8 [<ffffffc00024abcc>] worker_thread+0x480/0x610 [<ffffffc000251a80>] kthread+0x164/0x178 [<ffffffc0002045d0>] ret_from_fork+0x10/0x40 Since we don't know anything about LPM capabilities without BOS descriptor, don't attempt to enable LPM if it is not available. Fixes: 890dae886721 ("xhci: Enable LPM support only for hardwired ...") Cc: stable <stable@vger.kernel.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usb: host: ohci-platform: set hcd->phy to avoid phy_get() in usb_add_hcd()Yoshihiro Shimoda
This patch sets hcd->phy from own phy context to avoid phy_get() in usb_add_hcd(). Since core/hcd.c manages the phy only in usb_add_hcd() and usb_remove_hcd(), there is difficult to manage the phy in suspend/resume. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usb: host: ehci-platform: set hcd->phy to avoid phy_get() in usb_add_hcd()Yoshihiro Shimoda
This patch sets hcd->phy from own phy context to avoid phy_get() in usb_add_hcd(). Since core/hcd.c manages the phy only in usb_add_hcd() and usb_remove_hcd(), there is difficult to manage the phy in suspend/resume. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usb: host: Allow to build ehci orion with mvebu SoCsGregory CLEMENT
The mvebu ARM64 SoCs no longer select PLAT_ORION. However Armada 37xx use the Orion EHCI controller. This patch allows the Orion EHCI driver to be built when ARCH_MVEBU is selected. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usb: orion-ehci: Add support for the Armada 3700Hua Jing
- Add a new compatible string for the Armada 3700 SoCs - add sbuscfg support for orion usb controller driver. For the SoCs without hlock, need to program BAWR/BARD/AHBBRST fields in the sbuscfg register to guarantee the AHB master's burst would not overrun or underrun the FIFO. - the sbuscfg register has to be set after the usb controller reset, otherwise the value would be overridden to 0. In order to do this, the reset callback is registered. [gregory.clement@free-electrons.com: - reword commit and comments - fix error path in ehci_orion_drv_reset() - fix checkpatch warning] Signed-off-by: Hua Jing <jinghua@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17drivers, usb: convert ep_data.count from atomic_t to refcount_tElena Reshetova
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17drivers, usb: convert dev_data.count from atomic_t to refcount_tElena Reshetova
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17drivers, usb: convert ffs_data.ref from atomic_t to refcount_tElena Reshetova
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17USB: misc: sisusb_con: fix coccinelle warningJiri Slaby
After commit d705ff3818 (tty: vt, cleanup and document con_scroll), in the coccinelle output, we can see: drivers/usb/misc/sisusbvga/sisusb_con.c:852:8-9: WARNING: return of 0/1 in function 'sisusbcon_scroll_area' with return type bool Return true instead of 1 in the function returning bool which was intended to do in d705ff3818 but omitted. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Fixes: d705ff3818 (tty: vt, cleanup and document con_scroll) Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: cocci@systeme.lip6.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usb: storage: karma: remove useless variablePierre-Yves Kerbrat
Remove the useless variable 'partial' storing the actual length transferred. Nothing was done with it, so simply get rid of it as usb_stor_bulk_transfer_buf can handle having NULL instead. This also fixes the following sparse issues (-Wtypesign): drivers/usb/storage/karma.c:122:51: warning: incorrect type in argument 5 (different signedness) drivers/usb/storage/karma.c:122:51: expected unsigned int *act_len drivers/usb/storage/karma.c:122:51: got int *<noident> drivers/usb/storage/karma.c:127:52: warning: incorrect type in argument 5 (different signedness) drivers/usb/storage/karma.c:127:52: expected unsigned int *act_len drivers/usb/storage/karma.c:127:52: got int *<noident> Signed-off-by: Pierre-Yves Kerbrat <pkerbrat@free.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17USB: misc: ldusb: changed '*' location to fit coding StyleMilian Reichardt
Changed the location of '*' to fit the current coding style and easy readability. Signed-of-by: Milian Reichardt <mreichardt95@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17USB: misc: ldusb: Added Space after ',' to fit the coding styleMilian Reichardt
Added a Space after ',' to get rid of an error message in checkpatch.pl and improve readability Signed-of-by: Milian Reichardt <mreichardt95@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17USB: misc: ldusb: fixed decimal permission coding issueMilian Reichardt
Fixed ERROR: Use 4 digit octal (0777) not decimal permissions to fulfill the current coding-style. Signed-of-by: Milian Reichardt <mreichardt95@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usb: misc: remove unnecessary codeGustavo A. R. Silva
'val' is an unsigned variable, and less-than-zero comparison of an unsigned variable is never true. Addresses-Coverity-ID: 1230257 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usb: host: ehci-platform: fix usb 1.1 device is not connected in system resumeYoshihiro Shimoda
This patch fixes an issue that a usb 1.1 device is not connected in system resume and then the following message appeared if debug messages are enabled: usb 2-1: Waited 2000ms for CONNECT To resolve this issue, the EHCI controller must be resumed after its companion controllers. So, this patch adds such code on the driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usb: of: add functions to bind a companion controllerYoshihiro Shimoda
EHCI controllers will have a companion controller. However, on platform bus, there was difficult to bind them in previous code. So, this patch adds helper functions to bind them using a "companion" property. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17ACM gadget: fix endianness in notificationsOliver Neukum
The gadget code exports the bitfield for serial status changes over the wire in its internal endianness. The fix is to convert to little endian before sending it over the wire. Signed-off-by: Oliver Neukum <oneukum@suse.com> Tested-by: 家瑋 <momo1208@gmail.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17USB: usbtmc: fix probe error pathJohan Hovold
Make sure to initialise the return value to avoid having allocation failures going unnoticed when allocating interrupt-endpoint resources. This prevents use-after-free or worse when the device is later unbound. Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.") Cc: stable <stable@vger.kernel.org> # 4.6 Cc: Dave Penkler <dpenkler@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17USB: usbtmc: add missing endpoint sanity checkJohan Hovold
USBTMC devices are required to have a bulk-in and a bulk-out endpoint, but the driver failed to verify this, something which could lead to the endpoint addresses being taken from uninitialised memory. Make sure to zero all private data as part of allocation, and add the missing endpoint sanity check. Note that this also addresses a more recently introduced issue, where the interrupt-in-presence flag would also be uninitialised whenever the optional interrupt-in endpoint is not present. This in turn could lead to an interrupt urb being allocated, initialised and submitted based on uninitialised values. Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.") Fixes: 5b775f672cc9 ("USB: add USB test and measurement class driver") Cc: stable <stable@vger.kernel.org> # 2.6.28 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HWyuan linyu
a lot of embeded system SOC (e.g. freescale T2080) have both PCI and USB modules. But USB module is controlled by registers directly, it have no relationship with PCI module. when say N here it will not build PCI related code in USB driver. Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-13 09:18:32 +0000