summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2022-02-08usb: ehci: add pci device support for Aspeed platformsNeal Liu
Enable Aspeed quirks in commit 7f2d73788d90 ("usb: ehci: handshake CMD_RUN instead of STS_HALT") to support Aspeed ehci-pci device. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Link: https://lore.kernel.org/r/20220208101657.76459-1-neal_liu@aspeedtech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08usb: dwc3: gadget: Prevent core from processing stale TRBsUdipto Goswami
With CPU re-ordering on write instructions, there might be a chance that the HWO is set before the TRB is updated with the new mapped buffer address. And in the case where core is processing a list of TRBs it is possible that it fetched the TRBs when the HWO is set but before the buffer address is updated. Prevent this by adding a memory barrier before the HWO is updated to ensure that the core always process the updated TRBs. Fixes: f6bafc6a1c9d ("usb: dwc3: convert TRBs into bitshifts") Cc: stable <stable@vger.kernel.org> Reviewed-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com> Link: https://lore.kernel.org/r/1644207958-18287-1-git-send-email-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08usb: dwc3: Program GFLADJSean Anderson
GUCTL.REFCLKPER can only account for clock frequencies with integer periods. To address this, program REFCLK_FLADJ with the relative error caused by period truncation. The formula given in the register reference has been rearranged to allow calculation based on rate (instead of period), and to allow for fixed-point arithmetic. Additionally, calculate a value for 240MHZDECR. This configures a simulated 240Mhz clock using a counter with one fractional bit (PLS1). This register is programmed only for versions >= 2.50a, since this is the check also used by commit db2be4e9e30c ("usb: dwc3: Add frame length adjustment quirk"). Tested-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127200636.1456175-5-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08usb: dwc3: Calculate REFCLKPER based on reference clockSean Anderson
Instead of using a special property to determine the reference clock period, use the rate of the reference clock. When we have a legacy snps,ref-clock-period-ns property and no reference clock, use it instead. Fractional clocks are not currently supported, and will be dealt with in the next commit. Tested-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127200636.1456175-4-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08usb: dwc3: Get clocks individuallySean Anderson
Instead of grabbing all clocks in bulk, grab them individually. This will allow us to get the frequency or otherwise deal with discrete clocks. This may break some platforms if they use a clock which doesn't use one of the documented names. Reviewed-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127200636.1456175-3-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-07scsi: usb: storage: Complete the SCSI request directlySebastian Andrzej Siewior
The USB storage driver can complete its requests directly from a kernel thread. Use scsi_done_direct() to avoid waking ksoftirqd. Link: https://lore.kernel.org/r/20220201210954.570896-3-sebastian@breakpoint.cc Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-04usb: gadget: f_uac2: Neaten and reduce size of afunc_validate_optsJoe Perches
Remove the repetition and reduce the object size a bit. $ size drivers/usb/gadget/function/f_uac2.o* (x86-64 defconfig with gadget) text data bss dec hex filename 24515 3136 16 27667 6c13 drivers/usb/gadget/function/f_uac2.o.new 24817 3136 16 27969 6d41 drivers/usb/gadget/function/f_uac2.o.old Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/2132d97ca8d4dd5ac9426cc23af95e819079b02c.camel@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04usb: gadget: f_uac2: change maxpctksize/maxpcktsize to wMaxPacketSizeColin Ian King
The spelling of maxpctksize and maxpcktsize is inconsistent, rename them both to wMaxPacketSize instead. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220202104058.590312-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01USB: serial: cp210x: add CPI Bulk Coin Recycler idJohan Hovold
Add the device id for the Crane Payment Innovation / Money Controls Bulk Coin Recycler: https://www.cranepi.com/en/system/files/Support/OM_BCR_EN_V1-04_0.pdf Reported-by: Scott Russell <Scott.Russell2@ncr.com> Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2022-02-01USB: serial: cp210x: add NCR Retail IO box idJohan Hovold
Add the device id for NCR's Retail IO box (CP2105) used in NCR FastLane SelfServ Checkout - R6C: https://www.ncr.com/product-catalog/ncr-fastlane-selfserv-checkout-r6c Reported-by: Scott Russell <Scott.Russell2@ncr.com> Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2022-02-01USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320Cameron Williams
This patch adds support for the Brainboxes US-159, US-235 and US-320 USB-to-Serial devices. Signed-off-by: Cameron Williams <cang1@live.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-01-31usb: gadget: f_uac2: Add speed names to bInterval dbg/warnPavel Hofman
Add speed names for better clarity of dgb/warn messages from max packet size/bInterval checks. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220127114331.41367-5-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: gadget: f_uac2: Optionally determine bInterval for HS and SSPavel Hofman
Allow setting configfs params p_hs_bint/c_hs_bint to 0. If they are set to 0, determine the largest bInterval (4 to 1) for which the required bandwidth of the max samplerate fits the max allowed packet size. If the required bandwidth exceeds max bandwidth for single-packet mode (ep->mc=1), keep bInterval at 1. The FS speed is left at fixed bInterval=1. If for any speed the required bandwidth exceeds the max bandwidth corresponding to the selected/determined bInterval, print a warning. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220127114331.41367-4-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: gadget: audio: Add HS/SS bInterval params for UAC2Pavel Hofman
Allow configuring the existing f_uac2 configfs bInterval params through parameters of the gaudio module. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220127114331.41367-3-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: gadget: f_uac2: Add HS/SS bInterval to configfsPavel Hofman
Allow configuring the HS/SS bInterval through configfs, via parameters p_hs_bint/c_hs_bint separately for playback/capture. The default param values are left at the original 4. Suggested-by: John Keeping <john@metanate.com> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220127114331.41367-2-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: udc: Fix typo in commenttangmeng
Replace disbale with disable Signed-off-by: tangmeng <tangmeng@uniontech.com> Link: https://lore.kernel.org/r/20220127071619.31812-1-tangmeng@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31USB: ACPI: Replace acpi_bus_get_device()Rafael J. Wysocki
Replace acpi_bus_get_device() that is going to be dropped with acpi_fetch_acpi_dev(). No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/1899393.PYKUYFuaPT@kreacher Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: gadget: f_uac2: Define specific wTerminalTypePavel Hofman
Several users have reported that their Win10 does not enumerate UAC2 gadget with the existing wTerminalType set to UAC_INPUT_TERMINAL_UNDEFINED/UAC_INPUT_TERMINAL_UNDEFINED, e.g. https://github.com/raspberrypi/linux/issues/4587#issuecomment-926567213. While the constant is officially defined by the USB terminal types document, e.g. XMOS firmware for UAC2 (commonly used for Win10) defines no undefined output terminal type in its usbaudio20.h header. Therefore wTerminalType of EP-IN is set to UAC_INPUT_TERMINAL_MICROPHONE and wTerminalType of EP-OUT to UAC_OUTPUT_TERMINAL_SPEAKER for the UAC2 gadget. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220131071813.7433-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transitionAdam Ford
The support the external role switch a variety of situations were addressed, but the transition from USB_ROLE_HOST to USB_ROLE_NONE leaves the host up which can cause some error messages when switching from host to none, to gadget, to none, and then back to host again. xhci-hcd ee000000.usb: Abort failed to stop command ring: -110 xhci-hcd ee000000.usb: xHCI host controller not responding, assume dead xhci-hcd ee000000.usb: HC died; cleaning up usb 4-1: device not accepting address 6, error -108 usb usb4-port1: couldn't allocate usb_device After this happens it will not act as a host again. Fix this by releasing the host mode when transitioning to USB_ROLE_NONE. Fixes: 0604160d8c0b ("usb: gadget: udc: renesas_usb3: Enhance role switch support") Cc: stable <stable@vger.kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20220128223603.2362621-1-aford173@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: raw-gadget: fix handling of dual-direction-capable endpointsJann Horn
Under dummy_hcd, every available endpoint is *either* IN or OUT capable. But with some real hardware, there are endpoints that support both IN and OUT. In particular, the PLX 2380 has four available endpoints that each support both IN and OUT. raw-gadget currently gets confused and thinks that any endpoint that is usable as an IN endpoint can never be used as an OUT endpoint. Fix it by looking at the direction in the configured endpoint descriptor instead of looking at the hardware capabilities. With this change, I can use the PLX 2380 with raw-gadget. Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface") Cc: stable <stable@vger.kernel.org> Tested-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20220126205214.2149936-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: usb251xb: add boost-up property supportTommaso Merciai
Add support for boost-up register of usb251xb hub. boost-up property control USB electrical drive strength This register can be set: - Normal mode -> 0x00 - Low -> 0x01 - Medium -> 0x10 - High -> 0x11 (Normal Default) References: - http://www.mouser.com/catalog/specsheets/2514.pdf p29 Reviewed-by: Richard Leitner <richard.leitner@linux.dev> Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> Link: https://lore.kernel.org/r/20220128181713.96856-1-tomm.merciai@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: ulpi: Call of_node_put correctlySean Anderson
of_node_put should always be called on device nodes gotten from of_get_*. Additionally, it should only be called after there are no remaining users. To address the first issue, call of_node_put if later steps in ulpi_register fail. To address the latter, call put_device if device_register fails, which will call ulpi_dev_release if necessary. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127190004.1446909-3-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: ulpi: Move of_node_put to ulpi_dev_releaseSean Anderson
Drivers are not unbound from the device when ulpi_unregister_interface is called. Move of_node-freeing code to ulpi_dev_release which is called only after all users are gone. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127190004.1446909-2-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31USB: serial: option: add ZTE MF286D modemPawel Dembicki
Modem from ZTE MF286D is an Qualcomm MDM9250 based 3G/4G modem. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=19d2 ProdID=1485 Rev=52.87 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=MF286DZTED000000 C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-01-31USB: serial: ch341: add support for GW Instek USB2.0-Serial devicesStephan Brunner
Programmable lab power supplies made by GW Instek, such as the GPP-2323, have a USB port exposing a serial port to control the device. Stringing the supplied Windows driver, references to the ch341 chip are found. Binding the existing ch341 driver to the VID/PID of the GPP-2323 ("GW Instek USB2.0-Serial" as per the USB product name) works out of the box, communication and control is now possible. This patch should work with any GPP series power supply due to similarities in the product line. Signed-off-by: Stephan Brunner <s.brunner@stephan-brunner.net> Link: https://lore.kernel.org/r/4a47b864-0816-6f6a-efee-aa20e74bcdc6@stephan-brunner.net Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-01-31usb: f_fs: Fix use-after-free for epfileUdipto Goswami
Consider a case where ffs_func_eps_disable is called from ffs_func_disable as part of composition switch and at the same time ffs_epfile_release get called from userspace. ffs_epfile_release will free up the read buffer and call ffs_data_closed which in turn destroys ffs->epfiles and mark it as NULL. While this was happening the driver has already initialized the local epfile in ffs_func_eps_disable which is now freed and waiting to acquire the spinlock. Once spinlock is acquired the driver proceeds with the stale value of epfile and tries to free the already freed read buffer causing use-after-free. Following is the illustration of the race: CPU1 CPU2 ffs_func_eps_disable epfiles (local copy) ffs_epfile_release ffs_data_closed if (last file closed) ffs_data_reset ffs_data_clear ffs_epfiles_destroy spin_lock dereference epfiles Fix this races by taking epfiles local copy & assigning it under spinlock and if epfiles(local) is null then update it in ffs->epfiles then finally destroy it. Extending the scope further from the race, protecting the ep related structures, and concurrent accesses. Fixes: a9e6f83c2df1 ("usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable") Co-developed-by: Udipto Goswami <quic_ugoswami@quicinc.com> Reviewed-by: John Keeping <john@metanate.com> Signed-off-by: Pratham Pratap <quic_ppratap@quicinc.com> Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com> Link: https://lore.kernel.org/r/1643256595-10797-1-git-send-email-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: dwc3: xilinx: fix uninitialized return valueRobert Hancock
A previous patch to skip part of the initialization when a USB3 PHY was not present could result in the return value being uninitialized in that case, causing spurious probe failures. Initialize ret to 0 to avoid this. Fixes: 9678f3361afc ("usb: dwc3: xilinx: Skip resets and USB3 register settings for USB2.0 mode") Cc: <stable@vger.kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20220127221500.177021-1-robert.hancock@calian.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31Merge tag 'v5.17-rc2' into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: cdnsp: Fix segmentation fault in cdns_lost_power functionPawel Laszczak
CDNSP driver read not initialized cdns->otg_v0_regs which lead to segmentation fault. Patch fixes this issue. Fixes: 2cf2581cd229 ("usb: cdns3: add power lost support for system resume") cc: <stable@vger.kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20220111090737.10345-1-pawell@gli-login.cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: gadget: f_uac2: allow changing interface name via configfsYunhao Tian
This adds "function_name" configfs entry to change string value of the iInterface field. This field will be shown in Windows' audio settings panel, so being able to change it is useful. It will default to "Source/Sink" just as before. Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com> Link: https://lore.kernel.org/r/20220122112446.1415547-2-t123yh.xyz@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: gadget: f_uac1: allow changing interface name via configfsYunhao Tian
This adds "function_name" configfs entry to change string value of the iInterface field. This field will be shown in Windows' audio settings panel, so being able to change it is useful. It will default to "AC Interface" just as before if unchanged. Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com> Link: https://lore.kernel.org/r/20220122112446.1415547-1-t123yh.xyz@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: gadget: f_uac1: Add suspend callbackPavel Hofman
Add suspend callback to f_uac1 function, calling corresponding method of u_audio in order to stop the respective PCM streams and to notify subscribed clients about the stop. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220121155308.48794-11-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: gadget: f_uac2: Add suspend callbackPavel Hofman
When USB cable gets disconnected, the undergoing playback/capture stalls, without any notification to u_audio about the change. Experiments with a dwc2 gadget revealed that Suspend interrupt is thrown at cable disconnection, which the gadget framework translates to calling suspend callback of a function, if it is defined. Add the suspend callback to f_uac2 function, calling corresponding method of u_audio in order to stop the respective PCM streams and to notify subscribed clients at cable disconnection. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220121155308.48794-10-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: gadget: u_audio: Add suspend callPavel Hofman
Add exported method u_audio_suspend which sets stream status to inactive and sends notifications. The method does not free any resources. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220121155308.48794-9-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: gadget: u_audio: Rate ctl notifies about current srate (0=stopped)Pavel Hofman
The Playback/Capture ctl currently reports rate value set by USB control selector UAC2_CS_CONTROL_SAM_FREQ (fixed for UAC1). When the stops playback/capture, the reported value does not change. The gadget side has no information whether the host has started/stopped capture/playback. This patch sets the value reported by the respective rate ctl to zero when the host side has stopped playback/capture. Also, it calls snd_ctl_notify when start/stop occurs, so that a subscribed client can act appropriately. Tests have confirmed that USB hosts change UAC2_CS_CONTROL_SAM_FREQ before switching altsetting to activate playback/capture, resulting in correct order (params->c/p_srate is set to requested rate before u_audio_start_capture/playback is called). The gadget rate notifications are used by user-space audio gadget controller gaudio_ctl https://github.com/pavhofman/gaudio_ctl. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220121155308.48794-8-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: gadget: f_uac1: Support multiple sampling ratesJulian Scheel
A list of sampling rates can be specified via configfs. All enabled sampling rates are sent to the USB host on request. When the host selects a sampling rate the internal active rate is updated. Config strings with single value stay compatible with the previous version. Multiple samplerates passed as configuration arrays to g_audio module when built for f_uac1. Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220121155308.48794-7-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: gadget: f_uac2: Support multiple sampling ratesJulian Scheel
A list of sampling rates can be specified via configfs. All enabled sampling rates are sent to the USB host on request. When the host selects a sampling rate, the internal active rate (stored in struct f_uac2) is updated. The gadget no longer supports only one frequency. Therefore USB strings corresponding to the clock sources are renamed from specific Hz value to general names Input clock/Output clock. Config strings with single value stay compatible with the previous version. Multiple samplerates passed as configuration arrays to g_audio module when built for f_uac2. Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220121155308.48794-6-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: gadget: u_audio: Add capture/playback srate getterPavel Hofman
UAC1/UAC2 functions will need to query u_audio about the currently set srate. Add the getter functions. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220121155308.48794-5-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: gadget: u_audio: Move dynamic srate from params to rtdPavel Hofman
Parameters uac_params.p_srate/c_srate are dynamic now and are not part of parametric configuration anymore. Move them to the runtime struct uac_rtd_params for each stream. Suggested-by: John Keeping <john@metanate.com> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220121155308.48794-4-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: gadget: u_audio: Support multiple sampling ratesJulian Scheel
Implement support for multiple sampling rates in u_audio part of the audio gadget. The currently configured rates are exposed through read-only amixer controls 'Capture Rate' and 'Playback Rate'. Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220121155308.48794-3-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: gadget:audio: Replace deprecated macro S_IRUGOPavel Hofman
Use octal digits as suggested by checkpatch instead of the deprecated macro. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220121155308.48794-2-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: gadget: f_mass_storage: Make CD-ROM emulation work with Mac OS-XRoger Quadros
Mac OS-X expects CD-ROM TOC in raw format (i.e. format:2). It also sends the READ_TOC CDB in old style SFF8020i format. i.e. 2 format bits are encoded in MSBs of CDB byte 9. This patch will enable CD-ROM emulation to work with Mac OS-X. Tested on Mac OS X v10.6.3. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Jack Pham <quic_jackp@quicinc.com> Link: https://lore.kernel.org/r/20220124160150.19499-1-quic_jackp@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: xhci-mtk: Use struct_size() helper in create_sch_ep()Gustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/usb/host/xhci-mtk-sch.c:265:20: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/160 Link: https://github.com/KSPP/linux/issues/174 Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20220120015546.GA75917@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26USB: hcd-pci: Use PCI_STD_NUM_BARS when checking standard BARsBjorn Helgaas
usb_hcd_pci_probe() searches for an I/O BAR using a combination of PCI_STD_NUM_BARS (to control loop iteration) and PCI_ROM_RESOURCE (to check whether the loop exits without finding anything). Use PCI_STD_NUM_BARS consistently. No functional change since PCI_STD_NUM_BARS == PCI_ROM_RESOURCE, but this removes a dependency on that relationship and makes the code read better. Fixes: c9c13ba428ef ("PCI: Add PCI_STD_NUM_BARS for the number of standard BARs") Cc: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20220121183330.1141702-1-helgaas@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: gadget: f_fs: Use struct_size() and flex_array_size() helpersGustavo A. R. Silva
Make use of the struct_size() and flex_array_size() helpers instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/usb/gadget/function/f_fs.c:922:23: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/174 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20220120222933.GA35155@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: host: fotg210: Use struct_size() helper in kzalloc()Gustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/usb/host/fotg210-hcd.c:4017:20: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/174 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20220120222043.GA33559@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: core: Bail out when port is stuck in reset loopKai-Heng Feng
Unplugging USB device may cause an incorrect warm reset loop and the port can no longer be used: [ 143.039019] xhci_hcd 0000:00:14.0: Port change event, 2-3, id 19, portsc: 0x4202c0 [ 143.039025] xhci_hcd 0000:00:14.0: handle_port_status: starting usb2 port polling. [ 143.039051] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0008 [ 143.039058] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x4202c0, return 0x4102c0 [ 143.039092] xhci_hcd 0000:00:14.0: clear port3 connect change, portsc: 0x4002c0 [ 143.039096] usb usb2-port3: link state change [ 143.039099] xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0 [ 143.039101] usb usb2-port3: do warm reset [ 143.096736] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2b0, return 0x2b0 [ 143.096751] usb usb2-port3: not warm reset yet, waiting 50ms [ 143.131500] xhci_hcd 0000:00:14.0: Can't queue urb, port error, link inactive [ 143.138260] xhci_hcd 0000:00:14.0: Port change event, 2-3, id 19, portsc: 0x2802a0 [ 143.138263] xhci_hcd 0000:00:14.0: handle_port_status: starting usb2 port polling. [ 143.160756] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2802a0, return 0x3002a0 [ 143.160798] usb usb2-port3: not warm reset yet, waiting 200ms The port status is PP=1, CCS=0, PED=0, PLS=Inactive, which is Error state per "USB3 Root Hub Port State Machine". It's reasonable to perform warm reset several times, but if the port is still not enabled after many attempts, consider it's gone and treat it as disconnected. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220120070518.1643873-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: gadget: f_phonet: Use struct_size() helper in kzalloc()Gustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/usb/gadget/function/f_phonet.c:673:16: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/160 Link: https://github.com/KSPP/linux/issues/174 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20220120020155.GA76981@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: host: xhci-plat: Remove useless DMA-32 fallback configurationChristophe JAILLET
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. Simplify code and remove some dead code accordingly. [1]: https://lore.kernel.org/linux-kernel/YL3vSPK5DXTNvgdx@infradead.org/#t Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/178f859197bebb385609a7c9458fb972ed312e5d.1642233968.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: cdnsp: remove not used temp_64 variablesPawel Laszczak
Patch removes initialized but not used variables temp_64 from cdnsp_run function. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20220111114449.44402-1-pawell@gli-login.cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-11 16:39:27 +0000