summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-10-12Merge branch 'for-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Dmitry writes: "Input updates for v4.19-rc7 - we added a few scheduling points into various input interfaces to ensure that large writes will not cause RCU stalls - fixed configuring PS/2 keyboards as wakeup devices on newer platforms - added a new Xbox gamepad ID." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: uinput - add a schedule point in uinput_inject_events() Input: evdev - add a schedule point in evdev_write() Input: mousedev - add a schedule point in mousedev_write() Input: i8042 - enable keyboard wakeups by default when s2idle is used Input: xpad - add support for Xbox1 PDP Camo series gamepad
2018-10-12mtd: spi-nor: fsl-quadspi: fix read error for flash size larger than 16MBLiu Xiang
If the size of spi-nor flash is larger than 16MB, the read_opcode is set to SPINOR_OP_READ_1_1_4_4B, and fsl_qspi_get_seqid() will return -EINVAL when cmd is SPINOR_OP_READ_1_1_4_4B. This can cause read operation fail. Fixes: e46ecda764dc ("mtd: spi-nor: Add Freescale QuadSPI driver") Cc: <stable@vger.kernel.org> Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-12mtd: spi-nor: intel-spi: Add support for Intel Ice Lake SPI serial flashMika Westerberg
Intel Ice Lake exposes the SPI serial flash controller as a PCI device in the same way than Intel Denverton. Add Ice Lake SPI serial flash PCI ID to the driver list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-12pinctrl: bcm: ns: Use uintptr_t for casting dataRafał Miłecki
Fix up a compiler error on 64bit architectures where pointers and integers differ in size. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-12pinctrl: madera: Fix uninitialized variable bug in madera_mux_set_muxGustavo A. R. Silva
There is a potential execution path in which variable *ret* is checked in an IF statement, and then its value is used to report an error at line 659 without being properly initialized previously: 659 if (ret) 660 dev_err(priv->dev, "Failed to write to 0x%x (%d)\n", reg, ret); Fix this by initializing variable *ret* to 0 in order to avoid unpredictable or unintended results. Addresses-Coverity-ID: 1471969 ("Uninitialized scalar variable") Fixes: 218d72a77b0b ("pinctrl: madera: Add driver for Cirrus Logic Madera codecs") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-12cpuidle: menu: Simplify checks related to the polling stateRafael J. Wysocki
After some recent menu governor changes, the promotion of the "polling" state to a physical one is mostly controlled by the latency limit (resulting from the "interactivity" factor) and not by the time to the closest timer event, so it should be sufficient to check the exit latency of that state for this purpose (of course, its target residency still needs to be within the next timer event range for energy-efficiency). Also, the physical state the "polling" one is promoted to need not be the next one in principle (in case the next state is disabled, for example). For these reasons, simplify the checks made to decide whether or not to promote the "polling" state to a physical one and update the target idle duration when it is promoted in case the residency of the new state turns out to be above the tick boundary (in which case there is no reason to stop the tick). Tested-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-12ACPI: remove redundant 'default n' from KconfigBartlomiej Zolnierkiewicz
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-12gpiolib: Initialize gdev field before is usedRicardo Ribalda Delgado
gpio_hog depends on gdev field being initialized. This patch fixes an OOPs during initialization of TI's AM335x-ICEv2. Fixes: 3edfb7bd76bd1cba ("gpiolib: Show correct direction from the beginning") Tested-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netGreg Kroah-Hartman
David writes: "Networking 1) RXRPC receive path fixes from David Howells. 2) Re-export __skb_recv_udp(), from Jiri Kosina. 3) Fix refcounting in u32 classificer, from Al Viro. 4) Userspace netlink ABI fixes from Eugene Syromiatnikov. 5) Don't double iounmap on rmmod in ena driver, from Arthur Kiyanovski. 6) Fix devlink string attribute handling, we must pull a copy into a kernel buffer if the lifetime extends past the netlink request. From Moshe Shemesh. 7) Fix hangs in RDS, from Ka-Cheong Poon. 8) Fix recursive locking lockdep warnings in tipc, from Ying Xue. 9) Clear RX irq correctly in socionext, from Ilias Apalodimas. 10) bcm_sf2 fixes from Florian Fainelli." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) net: dsa: bcm_sf2: Call setup during switch resume net: dsa: bcm_sf2: Fix unbind ordering net: phy: sfp: remove sfp_mutex's definition r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chips net: socionext: clear rx irq correctly net/mlx4_core: Fix warnings during boot on driverinit param set failures tipc: eliminate possible recursive locking detected by LOCKDEP selftests: udpgso_bench.sh explicitly requires bash selftests: rtnetlink.sh explicitly requires bash. qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface tipc: queue socket protocol error messages into socket receive buffer tipc: set link tolerance correctly in broadcast link net: ipv4: don't let PMTU updates increase route MTU net: ipv4: update fnhe_pmtu when first hop's MTU changes net/ipv6: stop leaking percpu memory in fib6 info rds: RDS (tcp) hangs on sendto() to unresponding address net: make skb_partial_csum_set() more robust against overflows devlink: Add helper function for safely copy string param devlink: Fix param cmode driverinit for string type devlink: Fix param set handling for string type ...
2018-10-11hwmon: (pmbus) remove redundant 'default n' from KconfigBartlomiej Zolnierkiewicz
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-10-11hwmon: (core) Add trace events to _attr_show/store functionsNicolin Chen
Trace events are useful for people who collect data from the Ftrace outputs. There're people who analyse the relationship of cpufreq, thermal and hwmon (power/voltage/current) using the convenient and timestamped Ftrace outputs, while unlike cpufreq and thermal subsystems the hwmon does not have trace events supported yet. So this patch adds initial trace events for the hwmon core. To call hwmon_attr_base() for aligned attr index numbers, it also moves the function upward. Ftrace outputs: ...: hwmon_attr_show_string: index=2, attr_name=in2_label, val=VDD_5V ...: hwmon_attr_show: index=2, attr_name=in2_input, val=5112 ...: hwmon_attr_show: index=2, attr_name=curr2_input, val=440 Note that the _attr_show and _attr_store functions are tied to the _with_info API. So a hwmon driver requiring the trace events feature should use _with_info API to register a hwmon device. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-10-11ipmi: Fix timer race with module unloadJan Glauber
Please note that below oops is from an older kernel, but the same race seems to be present in the upstream kernel too. ---8<--- The following panic was encountered during removing the ipmi_ssif module: [ 526.352555] Unable to handle kernel paging request at virtual address ffff000006923090 [ 526.360464] Mem abort info: [ 526.363257] ESR = 0x86000007 [ 526.366304] Exception class = IABT (current EL), IL = 32 bits [ 526.372221] SET = 0, FnV = 0 [ 526.375269] EA = 0, S1PTW = 0 [ 526.378405] swapper pgtable: 4k pages, 48-bit VAs, pgd = 000000008ae60416 [ 526.385185] [ffff000006923090] *pgd=000000bffcffe803, *pud=000000bffcffd803, *pmd=0000009f4731a003, *pte=0000000000000000 [ 526.396141] Internal error: Oops: 86000007 [#1] SMP [ 526.401008] Modules linked in: nls_iso8859_1 ipmi_devintf joydev input_leds ipmi_msghandler shpchp sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear i2c_smbus hid_generic usbhid uas hid usb_storage ast aes_ce_blk i2c_algo_bit aes_ce_cipher qede ttm crc32_ce ptp crct10dif_ce drm_kms_helper ghash_ce syscopyarea sha2_ce sysfillrect sysimgblt pps_core fb_sys_fops sha256_arm64 sha1_ce mpt3sas qed drm raid_class ahci scsi_transport_sas libahci gpio_xlp i2c_xlp9xx aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 [last unloaded: ipmi_ssif] [ 526.468085] CPU: 125 PID: 0 Comm: swapper/125 Not tainted 4.15.0-35-generic #38~lp1775396+build.1 [ 526.476942] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL022 08/14/2018 [ 526.484932] pstate: 00400009 (nzcv daif +PAN -UAO) [ 526.489713] pc : 0xffff000006923090 [ 526.493198] lr : call_timer_fn+0x34/0x178 [ 526.497194] sp : ffff000009b0bdd0 [ 526.500496] x29: ffff000009b0bdd0 x28: 0000000000000082 [ 526.505796] x27: 0000000000000002 x26: ffff000009515188 [ 526.511096] x25: ffff000009515180 x24: ffff0000090f1018 [ 526.516396] x23: ffff000009519660 x22: dead000000000200 [ 526.521696] x21: ffff000006923090 x20: 0000000000000100 [ 526.526995] x19: ffff809eeb466a40 x18: 0000000000000000 [ 526.532295] x17: 000000000000000e x16: 0000000000000007 [ 526.537594] x15: 0000000000000000 x14: 071c71c71c71c71c [ 526.542894] x13: 0000000000000000 x12: 0000000000000000 [ 526.548193] x11: 0000000000000001 x10: ffff000009b0be88 [ 526.553493] x9 : 0000000000000000 x8 : 0000000000000005 [ 526.558793] x7 : ffff80befc1f8528 x6 : 0000000000000020 [ 526.564092] x5 : 0000000000000040 x4 : 0000000020001b20 [ 526.569392] x3 : 0000000000000000 x2 : ffff809eeb466a40 [ 526.574692] x1 : ffff000006923090 x0 : ffff809eeb466a40 [ 526.579992] Process swapper/125 (pid: 0, stack limit = 0x000000002eb50acc) [ 526.586854] Call trace: [ 526.589289] 0xffff000006923090 [ 526.592419] expire_timers+0xc8/0x130 [ 526.596070] run_timer_softirq+0xec/0x1b0 [ 526.600070] __do_softirq+0x134/0x328 [ 526.603726] irq_exit+0xc8/0xe0 [ 526.606857] __handle_domain_irq+0x6c/0xc0 [ 526.610941] gic_handle_irq+0x84/0x188 [ 526.614679] el1_irq+0xe8/0x180 [ 526.617822] cpuidle_enter_state+0xa0/0x328 [ 526.621993] cpuidle_enter+0x34/0x48 [ 526.625564] call_cpuidle+0x44/0x70 [ 526.629040] do_idle+0x1b8/0x1f0 [ 526.632256] cpu_startup_entry+0x2c/0x30 [ 526.636174] secondary_start_kernel+0x11c/0x130 [ 526.640694] Code: bad PC value [ 526.643800] ---[ end trace d020b0b8417c2498 ]--- [ 526.648404] Kernel panic - not syncing: Fatal exception in interrupt [ 526.654778] SMP: stopping secondary CPUs [ 526.658734] Kernel Offset: disabled [ 526.662211] CPU features: 0x5800c38 [ 526.665688] Memory Limit: none [ 526.668768] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Prevent mod_timer from arming a timer that was already removed by del_timer during module unload. Signed-off-by: Jan Glauber <jglauber@cavium.com> Cc: <stable@vger.kernel.org> # 3.19 Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-10-11net: dsa: bcm_sf2: Call setup during switch resumeFlorian Fainelli
There is no reason to open code what the switch setup function does, in fact, because we just issued a switch reset, we would make all the register get their default values, including for instance, having unused port be enabled again and wasting power and leading to an inappropriate switch core clock being selected. Fixes: 8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: dsa: bcm_sf2: Fix unbind orderingFlorian Fainelli
The order in which we release resources is unfortunately leading to bus errors while dismantling the port. This is because we set priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now permissible to clock gate the switch. Later on, when dsa_slave_destroy() comes in from dsa_unregister_switch() and calls dsa_switch_ops::port_disable, we perform the same dismantling again, and this time we hit registers that are clock gated. Make sure that dsa_unregister_switch() is the first thing that happens, which takes care of releasing all user visible resources, then proceed with clock gating hardware. We still need to set priv->wol_ports_mask to 0 to make sure that an enabled port properly gets disabled in case it was previously used as part of Wake-on-LAN. Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11i2c: Fix kerneldoc for renamed i2c dma put functionStephen Boyd
This function was renamed in commit 82fe39a6bc7b ("i2c: refactor function to release a DMA safe buffer") but this kernel doc wasn't updated to point at the new function. Rename it. Fixes: 82fe39a6bc7b ("i2c: refactor function to release a DMA safe buffer") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-10-11HID: usbhid: Add quirk for Redragon/Dragonrise Seymur 2Kai-Heng Feng
Redragon Seymur 2 stops working since commit 190d7f02ce8e ("HID: input: do not increment usages when a duplicate is found"). Use quirk HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE suggested by the commit can solve the issue. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200995 BugLink: https://bugs.launchpad.net/bugs/1793846 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-10-11leds: sc27xx: Add pattern_set/clear interfaces for LED controllerBaolin Wang
This patch implements the 'pattern_set'and 'pattern_clear' interfaces to support SC27XX LED breathing mode. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Pavel Machek <pavel@ucw.c> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-10-11leds: core: Introduce LED pattern triggerBaolin Wang
This patch adds a new LED trigger that LED device can configure to employ software or hardware pattern engine. Consumers can write 'pattern' file to enable the software pattern which alters the brightness for the specified duration with one software timer. Moreover consumers can write 'hw_pattern' file to enable the hardware pattern for some LED controllers which can autonomously control brightness over time, according to some preprogrammed hardware patterns. Signed-off-by: Raphael Teysseyre <rteysseyre@gmail.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-10-11PCI/IOV: Remove unnecessary include of <linux/pci-ats.h>Bjorn Helgaas
iov.c uses nothing declared in <linux/pci-ats.h>, so remove the include of it. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-11nfp: replace long license headers with SPDXJakub Kicinski
Replace the repeated license text with SDPX identifiers. While at it bump the Copyright dates for files we touched this year. Signed-off-by: Edwin Peer <edwin.peer@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Nic Viljoen <nick.viljoen@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: phy: sfp: remove sfp_mutex's definitionSebastian Andrzej Siewior
The sfp_mutex variable is defined but never used in this file. Not even in the commit that introduced that variable. Remove sfp_mutex, it has no purpose. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chipsMaciej S. Szmigiero
It has been reported that since commit 05212ba8132b42 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices") at least RTL_GIGA_MAC_VER_38 NICs work erratically after a resume from suspend. The problem has been traced to a missing RX_MULTI_EN bit in the RxConfig register. We already set this bit for RTL_GIGA_MAC_VER_35 NICs of the same 8168F chip family so let's do it also for its other siblings: RTL_GIGA_MAC_VER_36 and RTL_GIGA_MAC_VER_38. Curiously, the NIC seems to work fine after a system boot without having this bit set as long as the system isn't suspended and resumed. Fixes: 05212ba8132b42 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices") Reported-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: cdc_ncm: use tasklet_init() for tasklet_struct initBen Dooks
The tasklet initialisation would be better done by tasklet_init() instead of assuming all the fields are in an ok state by default. This does not fix any actual know bug. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: socionext: clear rx irq correctlyIlias Apalodimas
commit 63ae7949e94a ("net: socionext: Use descriptor info instead of MMIO reads on Rx") removed constant mmio reads from the driver and started using a descriptor field to check if packet should be processed. This lead the napi rx handler being constantly called while no packets needed processing and ksoftirq getting 100% cpu usage. Issue one mmio read to clear the irq correcty after processing packets Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net/mlx4_core: Fix warnings during boot on driverinit param set failuresMoshe Shemesh
During boot, mlx4_core sets the driverinit configuration parameters and updates the devlink module on the initial values calling devlink_param_driverinit_value_set(). If devlink_param_driverinit_value_set() returns an error mlx4_core reports kernel module warning. This caused false alarm during boot in case kernel was compiled with CONFIG_NET_DEVLINK off. Fix by removing warning reported in case devlink_param_driverinit_value_set() fails. This actually makes the function mlx4_devlink_set_init_value() redundant to using directly devlink_param_driverinit_value_set() and so removed. It fixes the following kernel trace: mlx4_core 0000:00:06.0: devlink set parameter 0 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 1 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 4 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 5 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 3 value failed (err = -95) Fixes: bd1b51dc66df ("mlx4: Add mlx4 initial parameters table and register it") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11cxgb4: fix thermal configuration dependenciesArnd Bergmann
With CONFIG_THERMAL=m, we get a build error: drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c: In function 'cxgb4_thermal_get_trip_type': drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c:48:11: error: 'struct adapter' has no member named 'ch_thermal' Once that is fixed by using IS_ENABLED() checks, we get a link error against the thermal subsystem when cxgb4 is built-in: drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o: In function `cxgb4_thermal_init': cxgb4_thermal.c:(.text+0x180): undefined reference to `thermal_zone_device_register' drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o: In function `cxgb4_thermal_remove': cxgb4_thermal.c:(.text+0x1e0): undefined reference to `thermal_zone_device_unregister' Finally, since CONFIG_THERMAL can be =m, the Makefile fails to pick up the extra file into built-in.a, and we get another link failure against the cxgb4_thermal_init/cxgb4_thermal_remove files, so the Makefile has to be adapted as well to work for both CONFIG_THERMAL=y and =m. Fixes: b18719157762 ("cxgb4: Add thermal zone support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: fix indentations in ena_defs for better readabilityArthur Kiyanovski
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: update driver version to 2.0.1Arthur Kiyanovski
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: remove redundant parameter in ena_com_admin_init()Arthur Kiyanovski
Remove redundant spinlock acquire parameter from ena_com_admin_init() Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: change rx copybreak default to reduce kernel memory pressureArthur Kiyanovski
Improves socket memory utilization when receiving packets larger than 128 bytes (the previous rx copybreak) and smaller than 256 bytes. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: limit refill Rx threshold to 256 to avoid latency issuesArthur Kiyanovski
Currently Rx refill is done when the number of required descriptors is above 1/8 queue size. With a default of 1024 entries per queue the threshold is 128 descriptors. There is intention to increase the queue size to 8196 entries. In this case threshold of 1024 descriptors is too large and can hurt latency. Add another limitation to Rx threshold to be at most 256 descriptors. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: explicit casting and initialization, and clearer error handlingArthur Kiyanovski
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: use CSUM_CHECKED device indication to report skb's checksum statusArthur Kiyanovski
Set skb->ip_summed to the correct value as reported by the device. Add counter for the case where rx csum offload is enabled but device didn't check it. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: add functions for handling Low Latency Queues in ena_netdevArthur Kiyanovski
This patch includes all code changes necessary in ena_netdev to enable packet sending via the LLQ placemnt mode. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: add functions for handling Low Latency Queues in ena_comArthur Kiyanovski
This patch introduces APIs for detection, initialization, configuration and actual usage of low latency queues(LLQ). It extends transmit API with creation of LLQ descriptors in device memory (which include host buffers descriptors as well as packet header) Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: introduce Low Latency Queues data structures according to ENA specArthur Kiyanovski
Low Latency Queues(LLQ) allow usage of device's memory for descriptors and headers. Such queues decrease processing time since data is already located on the device when driver rings the doorbell. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: complete host info to match latest ENA specArthur Kiyanovski
Add new fields and definitions to host info and fill them according to the latest ENA spec version. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: minor performance improvementArthur Kiyanovski
Reduce fastpath overhead by making ena_com_tx_comp_req_id_get() inline. Also move it to ena_eth_com.h file with its dependency function ena_com_cq_inc_head(). Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11Merge tag 'alloc-args-v4.19-rc8' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Kees writes: "Fix open-coded multiplication arguments to allocators - Fixes several new open-coded multiplications added in the 4.19 merge window." * tag 'alloc-args-v4.19-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Replace more open-coded allocation size multiplications
2018-10-11mlxsw: spectrum: Add NVE packet trapsIdo Schimmel
The DECAP_ECN0 trap will be used to trap packets where the overlay packet is marked with Non-ECT, but the underlay packet is marked with either ECT(0), ECT(1) or CE. When trapped, such packets will be counted as errors by the VxLAN driver and thus provide better visibility. The NVE_ENCAP_ARP trap will be used to trap ARP packets undergoing NVE encapsulation. This is needed in order to support E-VPN ARP suppression, where the Linux bridge does not flood ARP packets through tunnel ports in case it can answer the ARP request itself. Note that all the packets trapped via these traps are marked with 'offload_fwd_mark', so as to not be re-flooded by the Linux bridge through the ASIC ports. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: resources: Add NVE resourcesIdo Schimmel
Add the following resources to be used by the NVE code: * Number of IPv4 underlay destination IPs in a single TNUMT record * Number of IPv6 underlay destination IPs in a single TNUMT record Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Monitoring Parsing State RegisterIdo Schimmel
This register is used for setting up the parsing for hash, policy-engine and routing. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add definition of unicast tunnel record for SFD registerIdo Schimmel
Will be used to program the device with FDB records pointing to a NVE tunnel. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Tunneling NVE QoS Default RegisterIdo Schimmel
The TNQDR register configures the default QoS settings for NVE encapsulation. It will be used to set the default DSCP of each port to 0, so that when DSCP is set to inherit and the overlay packet does not have an IP header the outer DSCP will be set to 0, in accordance with the software data path. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Tunneling NVE QoS Configuration RegisterIdo Schimmel
The register configures how QoS is set in Encapsulation into the underlay network. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Tunneling NVE Decapsulation ECN Mapping RegisterIdo Schimmel
This register configures the actions that are done during NVE decapsulation based on the ECN bits. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Tunneling NVE Encapsulation ECN Mapping RegisterIdo Schimmel
This register performs mapping from overlay ECN to underlay ECN during NVE encapsulation. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Tunneling NVE Underlay Multicast Table RegisterIdo Schimmel
This register builds the linked list of underlay destination IPs used for BUM traffic on the overlay. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Tunnel Port Configuration RegisterIdo Schimmel
This register enables / disables learning on different types of tunnel ports (e.g., NVE, VPLS). Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Tunneling NVE General Configuration RegisterIdo Schimmel
This register configures global NVE configuration such as source IP of the NVE tunnel and UDP source port calculation. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-30 10:10:17 +0000