summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-05-14media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*()Takashi Iwai
Using a semaphore in the wait_event*() condition is no good idea. It hits a kernel WARN_ON() at prepare_to_wait_event() like: do not call blocking ops when !TASK_RUNNING; state=1 set at prepare_to_wait_event+0x6d/0x690 For avoiding the potential deadlock, rewrite to an open-coded loop instead. Unlike the loop in wait_event*(), this uses wait_woken() after the condition check, hence the task state stays consistent. CVE-2023-31084 was assigned to this bug. Link: https://lore.kernel.org/r/CA+UBctCu7fXn4q41O_3=id1+OdyQ85tZY1x+TkT-6OVBL6KAUw@mail.gmail.com/ Link: https://lore.kernel.org/linux-media/20230512151800.1874-1-tiwai@suse.de Reported-by: Yu Hao <yhao016@ucr.edu> Closes: https://nvd.nist.gov/vuln/detail/CVE-2023-31084 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-core: Fix use-after-free due to race at dvb_register_device()Hyunwoo Kim
dvb_register_device() dynamically allocates fops with kmemdup() to set the fops->owner. And these fops are registered in 'file->f_ops' using replace_fops() in the dvb_device_open() process, and kfree()d in dvb_free_device(). However, it is not common to use dynamically allocated fops instead of 'static const' fops as an argument of replace_fops(), and UAF may occur. These UAFs can occur on any dvb type using dvb_register_device(), such as dvb_dvr, dvb_demux, dvb_frontend, dvb_net, etc. So, instead of kfree() the fops dynamically allocated in dvb_register_device() in dvb_free_device() called during the .disconnect() process, kfree() it collectively in exit_dvbdev() called when the dvbdev.c module is removed. Link: https://lore.kernel.org/linux-media/20221117045925.14297-4-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-core: Fix use-after-free due on race condition at dvb_netHyunwoo Kim
A race condition may occur between the .disconnect function, which is called when the device is disconnected, and the dvb_device_open() function, which is called when the device node is open()ed. This results in several types of UAFs. The root cause of this is that you use the dvb_device_open() function, which does not implement a conditional statement that checks 'dvbnet->exit'. So, add 'remove_mutex` to protect 'dvbnet->exit' and use locked_dvb_net_open() function to check 'dvbnet->exit'. [mchehab: fix a checkpatch warning] Link: https://lore.kernel.org/linux-media/20221117045925.14297-3-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-core: Fix use-after-free on race condition at dvb_frontendHyunwoo Kim
If the device node of dvb_frontend is open() and the device is disconnected, many kinds of UAFs may occur when calling close() on the device node. The root cause of this is that wake_up() for dvbdev->wait_queue is implemented in the dvb_frontend_release() function, but wait_event() is not implemented in the dvb_frontend_stop() function. So, implement wait_event() function in dvb_frontend_stop() and add 'remove_mutex' which prevents race condition for 'fe->exit'. [mchehab: fix a couple of checkpatch warnings and some mistakes at the error handling logic] Link: https://lore.kernel.org/linux-media/20221117045925.14297-2-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: mn88443x: fix !CONFIG_OF error by drop of_match_ptr from ID tableKrzysztof Kozlowski
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/dvb-frontends/mn88443x.c:782:34: error: ‘mn88443x_of_match’ defined but not used [-Werror=unused-const-variable=] Link: https://lore.kernel.org/linux-media/20230312131318.351173-28-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()Hyunwoo Kim
Since dvb_frontend_detach() is not called in ttusb_dec_exit_dvb(), which is called when the device is disconnected, dvb_frontend_free() is not finally called. This causes a memory leak just by repeatedly plugging and unplugging the device. Fix this issue by adding dvb_frontend_detach() to ttusb_dec_exit_dvb(). Link: https://lore.kernel.org/linux-media/20221117045925.14297-5-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb_ca_en50221: fix a size write bugYongSu Yoo
The function of "dvb_ca_en50221_write_data" at source/drivers/media /dvb-core/dvb_ca_en50221.c is used for two cases. The first case is for writing APDU data in the function of "dvb_ca_en50221_io_write" at source/drivers/media/dvb-core/ dvb_ca_en50221.c. The second case is for writing the host link buf size on the Command Register in the function of "dvb_ca_en50221_link_init" at source/drivers/media/dvb-core/dvb_ca_en50221.c. In the second case, there exists a bug like following. In the function of the "dvb_ca_en50221_link_init", after a TV host calculates the host link buf_size, the TV host writes the calculated host link buf_size on the Size Register. Accroding to the en50221 Spec (the page 60 of https://dvb.org/wp-content/uploads/2020/02/En50221.V1.pdf), before this writing operation, the "SW(CMDREG_SW)" flag in the Command Register should be set. We can see this setting operation in the function of the "dvb_ca_en50221_link_init" like below. ... if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SW)) != 0) return ret; ... But, after that, the real writing operation is implemented using the function of the "dvb_ca_en50221_write_data" in the function of "dvb_ca_en50221_link_init", and the "dvb_ca_en50221_write_data" includes the function of "ca->pub->write_cam_control", and the function of the "ca->pub->write_cam_control" in the function of the "dvb_ca_en50221_wrte_data" does not include "CMDREG_SW" flag like below. ... if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_HC)) != 0) ... In the above source code, we can see only the "IRQEN | CMDREG_HC", but we cannot see the "CMDREG_SW". The "CMDREG_SW" flag which was set in the function of the "dvb_ca_en50221_link_init" was rollbacked by the follwoing function of the "dvb_ca_en50221_write_data". This is a bug. and this bug causes that the calculated host link buf_size is not properly written in the CI module. Through this patch, we fix this bug. Link: https://lore.kernel.org/linux-media/20220818125027.1131-1-yongsuyoo0215@gmail.com Signed-off-by: YongSu Yoo <yongsuyoo0215@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: netup_unidvb: fix irq init by register it at the end of probeWei Chen
IRQ handler netup_spi_interrupt() takes spinlock spi->lock. The lock is initialized in netup_spi_init(). However, irq handler is registered before initializing the lock. Spinlock dma->lock and i2c->lock suffer from the same problem. Fix this by registering the irq at the end of probe. Link: https://lore.kernel.org/linux-media/20230315134518.1074497-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_addressWei Chen
In su3000_read_mac_address, if i2c_transfer fails to execute two messages, array mac address will not be initialized. Without handling such error, later in function dvb_usb_adapter_dvb_init, proposed_mac is accessed before initialization. Fix this error by returning a negative value if message execution fails. Link: https://lore.kernel.org/linux-media/20230328124416.560889-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer()Wei Chen
In digitv_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach digitv_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Link: https://lore.kernel.org/linux-media/20230313095008.1039689-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xferZhang Shurong
In rtl28xxu_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach rtl28xxu_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Link: https://lore.kernel.org/linux-media/tencent_3623572106754AC2F266B316798B0F6CCA05@qq.com Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer()Wei Chen
In ce6230_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach ce6230_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Link: https://lore.kernel.org/linux-media/20230313092751.209496-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer()Wei Chen
In ec168_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. If accessing msg[i].buf[0] without sanity check, null pointer deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Link: https://lore.kernel.org/linux-media/20230313085853.3252349-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer()Wei Chen
In az6027_i2c_xfer, msg is controlled by user. When msg[i].buf is null, commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") fix the null-ptr-deref bug when msg[i].addr is 0x99. However, null-ptr-deref also happens when msg[i].addr is 0xd0 and 0xc0. We add check on msg[i].len to prevent null-ptr-deref. Link: https://lore.kernel.org/linux-media/20230310165604.3093483-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: netup_unidvb: fix use-after-free at del_timer()Duoming Zhou
When Universal DVB card is detaching, netup_unidvb_dma_fini() uses del_timer() to stop dma->timeout timer. But when timer handler netup_unidvb_dma_timeout() is running, del_timer() could not stop it. As a result, the use-after-free bug could happen. The process is shown below: (cleanup routine) | (timer routine) | mod_timer(&dev->tx_sim_timer, ..) netup_unidvb_finidev() | (wait a time) netup_unidvb_dma_fini() | netup_unidvb_dma_timeout() del_timer(&dma->timeout); | | ndev->pci_dev->dev //USE Fix by changing del_timer() to del_timer_sync(). Link: https://lore.kernel.org/linux-media/20230308125514.4208-1-duoming@zju.edu.cn Fixes: 52b1eaf4c59a ("[media] netup_unidvb: NetUP Universal DVB-S/S2/T/T2/C PCI-E card driver") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-13Merge tag 'fbdev-for-6.4-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes from Helge Deller: - use after free fix in imsttfb (Zheng Wang) - fix error handling in arcfb (Zongjie Li) - lots of whitespace cleanups (Thomas Zimmermann) - add 1920x1080 modedb entry (me) * tag 'fbdev-for-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: stifb: Fix info entry in sti_struct on error path fbdev: modedb: Add 1920x1080 at 60 Hz video mode fbdev: imsttfb: Fix use after free bug in imsttfb_probe fbdev: vfb: Remove trailing whitespaces fbdev: valkyriefb: Remove trailing whitespaces fbdev: stifb: Remove trailing whitespaces fbdev: sa1100fb: Remove trailing whitespaces fbdev: platinumfb: Remove trailing whitespaces fbdev: p9100: Remove trailing whitespaces fbdev: maxinefb: Remove trailing whitespaces fbdev: macfb: Remove trailing whitespaces fbdev: hpfb: Remove trailing whitespaces fbdev: hgafb: Remove trailing whitespaces fbdev: g364fb: Remove trailing whitespaces fbdev: controlfb: Remove trailing whitespaces fbdev: cg14: Remove trailing whitespaces fbdev: atmel_lcdfb: Remove trailing whitespaces fbdev: 68328fb: Remove trailing whitespaces fbdev: arcfb: Fix error handling in arcfb_probe()
2023-05-13Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "A single small fix for the UFS driver to fix a power management failure" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Fix I/O hang that occurs when BKOPS fails in W-LUN suspend
2023-05-13iio: dac: mcp4725: Fix i2c_master_send() return value handlingMarek Vasut
The i2c_master_send() returns number of sent bytes on success, or negative on error. The suspend/resume callbacks expect zero on success and non-zero on error. Adapt the return value of the i2c_master_send() to the expectation of the suspend and resume callbacks, including proper validation of the return value. Fixes: cf35ad61aca2 ("iio: add mcp4725 I2C DAC driver") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230511004330.206942-1-marex@denx.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: accel: kx022a fix irq gettingMatti Vaittinen
The fwnode_irq_get_byname() was returning 0 at device-tree mapping error. If this occurred, the KX022A driver did abort the probe but errorneously directly returned the return value from fwnode_irq_get_byname() from probe. In case of a device-tree mapping error this indicated success. The fwnode_irq_get_byname() has since been fixed to not return zero on error so the check for fwnode_irq_get_byname() can be relaxed to only treat negative values as errors. This will also do decent fix even when backported to branches where fwnode_irq_get_byname() can still return zero on error because KX022A probe should later fail at IRQ requesting and a prober error handling should follow. Relax the return value check for fwnode_irq_get_byname() to only treat negative values as errors. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202305110245.MFxC9bUj-lkp@intel.com/ Link: https://lore.kernel.org/r/202305110245.MFxC9bUj-lkp@intel.com/ Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: 7c1d1677b322 ("iio: accel: Support Kionix/ROHM KX022A accelerometer") Link: https://lore.kernel.org/r/b45b4b638db109c6078d243252df3a7b0485f7d5.1683875389.git.mazziesaccount@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: bu27034: Ensure reset is writtenMatti Vaittinen
The reset bit must be always written to the hardware no matter what value is in a cache or register. Ensure this by using regmap_write_bits() instead of the regmap_update_bits(). Furthermore, the SWRESET bit may be self-clearing, so mark the SYSTEM_CONTROL register volatile to guarantee we do also read the right state - should we ever need to read it. Finally, writing the SWRESET bit will restore the default register values. This can cause register cache to be outdated if there are any register values cached. Rebuild register cache after SWRESET and use regmap_update_bits() when performing the reset. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: e52afbd61039 ("iio: light: ROHM BU27034 Ambient Light Sensor") Link: https://lore.kernel.org/r/ZFjWhbfuN5XcKty+@fedora Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: dac: build ad5758 driver when AD5758 is selectedLukas Bulwahn
Commit 28d1a7ac2a0d ("iio: dac: Add AD5758 support") adds the config AD5758 and the corresponding driver ad5758.c. In the Makefile, the ad5758 driver is however included when AD5755 is selected, not when AD5758 is selected. Probably, this was simply a mistake that happened by copy-and-paste and forgetting to adjust the actual line. Surprisingly, no one has ever noticed that this driver is actually only included when AD5755 is selected and that the config AD5758 has actually no effect on the build. Fixes: 28d1a7ac2a0d ("iio: dac: Add AD5758 support") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20230508040208.12033-1-lukas.bulwahn@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: addac: ad74413: fix resistance input processingRasmus Villemoes
On success, ad74413r_get_single_adc_result() returns IIO_VAL_INT aka 1. So currently, the IIO_CHAN_INFO_PROCESSED case is effectively equivalent to the IIO_CHAN_INFO_RAW case, and we never call ad74413r_adc_to_resistance_result() to convert the adc measurement to ohms. Check ret for being negative rather than non-zero. Fixes: fea251b6a5dbd (iio: addac: add AD74413R driver) Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230503095817.452551-1-linux@rasmusvillemoes.dk Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: light: vcnl4035: fixed chip ID checkFrank Li
VCNL4035 register(0xE) ID_L and ID_M define as: ID_L: 0x80 ID_H: 7:6 (0:0) 5:4 (0:0) slave address = 0x60 (7-bit) (0:1) slave address = 0x51 (7-bit) (1:0) slave address = 0x40 (7-bit) (1:0) slave address = 0x41 (7-bit) 3:0 Version code default (0:0:0:0) So just check ID_L. Fixes: 55707294c4eb ("iio: light: Add support for vishay vcnl4035") Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20230501143605.1615549-1-Frank.Li@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: adc: stm32-adc: skip adc-channels setup if none is presentSean Nyekjaer
If only adc differential channels are defined driver will fail with stm32-adc: probe of 48003000.adc:adc@0 failed with error -22 Fix this by skipping the initialization if no channels are defined. This applies only to the legacy way of initializing adc channels. Fixes: d7705f35448a ("iio: adc: stm32-adc: convert to device properties") Signed-off-by: Sean Nyekjaer <sean@geanix.com> Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com> Link: https://lore.kernel.org/r/20230503162029.3654093-2-sean@geanix.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: adc: stm32-adc: skip adc-diff-channels setup if none is presentSean Nyekjaer
If no adc differential channels are defined driver will fail with EINVAL: stm32-adc: probe of 48003000.adc:adc@0 failed with error -22 Fix this by skipping the initialization if no channels are defined. This applies only to the legacy way of initializing adc channels. Fixes: d7705f35448a ("iio: adc: stm32-adc: convert to device properties") Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20230503162029.3654093-1-sean@geanix.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: adc: ad7192: Change "shorted" channels to differentialPaul Cercueil
The AD7192 provides a specific channel configuration where both negative and positive inputs are connected to AIN2. This was represented in the ad7192 driver as a IIO channel with .channel = 2 and .extended_name set to "shorted". The problem with this approach, is that the driver provided two IIO channels with the identifier .channel = 2; one "shorted" and the other not. This goes against the IIO ABI, as a channel identifier should be unique. Address this issue by changing "shorted" channels to being differential instead, with channel 2 vs. itself, as we're actually measuring AIN2 vs. itself. Note that the fix tag is for the commit that moved the driver out of staging. The bug existed before that, but backporting would become very complex further down and unlikely to happen. Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Co-developed-by: Alisa Roman <alisa.roman@analog.com> Signed-off-by: Alisa Roman <alisa.roman@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230330102100.17590-1-paul@crapouillou.net Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: accel: st_accel: Fix invalid mount_matrix on devices without ACPI _ONT ↵Hans de Goede
method When apply_acpi_orientation() fails, st_accel_common_probe() will fall back to iio_read_mount_matrix(), which checks for a mount-matrix device property and if that is not set falls back to the identity matrix. But when a sensor has no ACPI companion fwnode, or when the ACPI fwnode does not have a "_ONT" method apply_acpi_orientation() was returning 0, causing iio_read_mount_matrix() to never get called resulting in an invalid mount_matrix: [root@fedora ~]# cat /sys/bus/iio/devices/iio\:device0/mount_matrix (null), (null), (null); (null), (null), (null); (null), (null), (null) Fix this by making apply_acpi_orientation() always return an error when it did not set the mount_matrix. Fixes: 3d8ad94bb175 ("iio: accel: st_sensors: Support generic mounting matrix") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Marius Hoch <mail@mariushoch.de> Link: https://lore.kernel.org/r/20230416212409.310936-1-hdegoede@redhat.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: gts-helpers: fix integration time unitsMatti Vaittinen
The IIO ABI mandates expressing integration times in seconds. The GTS helper errorneously uses micro seconds in integration_times_available. Fix this by converting the lists to IIO_VAL_INT_PLUS_MICRO. Fixes: 38416c28e168 ("iio: light: Add gain-time-scale helpers") Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/eeacd192c259e885850b5a2dd8b776bccfc44fa8.1681722914.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: bu27034: Fix integration timeMatti Vaittinen
The bu27034 uses micro seconds for integration time configuration. This is incorrect as the ABI mandates use of seconds. Change BU27034 driver to use seconds for integration time. Fixes: e52afbd61039 ("iio: light: ROHM BU27034 Ambient Light Sensor") Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/a05647669af22ba919c7c87dccb43975e3235a87.1681722914.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: adc: palmas: fix off by one bugsDan Carpenter
Valid values for "adc_chan" are zero to (PALMAS_ADC_CH_MAX - 1). Smatch detects some buffer overflows caused by this: drivers/iio/adc/palmas_gpadc.c:721 palmas_gpadc_read_event_value() error: buffer overflow 'adc->thresholds' 16 <= 16 drivers/iio/adc/palmas_gpadc.c:758 palmas_gpadc_write_event_value() error: buffer overflow 'adc->thresholds' 16 <= 16 The effect of this bug in other functions is more complicated but obviously we should fix all of them. Fixes: a99544c6c883 ("iio: adc: palmas: add support for iio threshold events") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/14fee94a-7db7-4371-b7d6-e94d86b9561e@kili.mountain Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: adc: mxs-lradc: fix the order of two cleanup operationsJiakai Luo
Smatch reports: drivers/iio/adc/mxs-lradc-adc.c:766 mxs_lradc_adc_probe() warn: missing unwind goto? the order of three init operation: 1.mxs_lradc_adc_trigger_init 2.iio_triggered_buffer_setup 3.mxs_lradc_adc_hw_init thus, the order of three cleanup operation should be: 1.mxs_lradc_adc_hw_stop 2.iio_triggered_buffer_cleanup 3.mxs_lradc_adc_trigger_remove we exchange the order of two cleanup operations, introducing the following differences: 1.if mxs_lradc_adc_trigger_init fails, returns directly; 2.if trigger_init succeeds but iio_triggered_buffer_setup fails, goto err_trig and remove the trigger. In addition, we also reorder the unwind that goes on in the remove() callback to match the new ordering. Fixes: 6dd112b9f85e ("iio: adc: mxs-lradc: Add support for ADC driver") Signed-off-by: Jiakai Luo <jkluo@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230422133407.72908-1-jkluo@hust.edu.cn Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: ad4130: Make sure clock provider gets removedLars-Peter Clausen
The ad4130 driver registers a clock provider, but never removes it. This leaves a stale clock provider behind that references freed clocks when the device is unbound. Register a managed action to remove the clock provider when the device is removed. Fixes: 62094060cf3a ("iio: adc: ad4130: add AD4130 driver") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230414150702.518441-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: tmag5273: Fix runtime PM leak on measurement errorLars-Peter Clausen
The tmag5273 gets a runtime PM reference before reading a measurement and releases it when done. But if the measurement fails the tmag5273_read_raw() function exits before releasing the reference. Make sure that this error path also releases the runtime PM reference. Fixes: 866a1389174b ("iio: magnetometer: add ti tmag5273 driver") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Gerald Loacker <gerald.loacker@wolfvision.net> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230414013752.498767-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: adc: mt6370: Fix ibus and ibat scaling value of some specific vendor ID ↵ChiaEn Wu
chips The scale value of ibus and ibat on the datasheet is incorrect due to the customer report after the experimentation with some specific vendor ID chips. Fixes: c1404d1b659f ("iio: adc: mt6370: Add MediaTek MT6370 support") Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/1681122862-1994-1-git-send-email-chiaen_wu@richtek.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: adc: imx93: fix a signedness bug in imx93_adc_read_raw()Dan Carpenter
The problem is these lines: ret = vref_uv = regulator_get_voltage(adc->vref); if (ret < 0) The "ret" variable is type long and "vref_uv" is u32 so that means the condition can never be true on a 64bit system. A negative error code from regulator_get_voltage() would be cast to a high positive u32 value and then remain a high positive value when cast to a long. The "ret" variable only ever stores ints so it should be declared as an int. We can delete the "vref_uv" variable and use "ret" directly. Fixes: 7d02296ac8b8 ("iio: adc: add imx93 adc support") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/Y+utEvjfjQRQo2QB@kili Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13net: hns3: fix reset timeout when enable full VFJijie Shao
The timeout of the cmdq reset command has been increased to resolve the reset timeout issue in the full VF scenario. The timeout of other cmdq commands remains unchanged. Fixes: 8d307f8e8cf1 ("net: hns3: create new set of unified hclge_comm_cmd_send APIs") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: hns3: fix reset delay time to avoid configuration timeoutJie Wang
Currently the hns3 vf function reset delays 5000ms before vf rebuild process. In product applications, this delay is too long for application configurations and causes configuration timeout. According to the tests, 500ms delay is enough for reset process except PF FLR. So this patch modifies delay to 500ms in these scenarios. Fixes: 6988eb2a9b77 ("net: hns3: Add support to reset the enet/ring mgmt layer") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: hns3: fix sending pfc frames after reset issueJijie Shao
To prevent the system from abnormally sending PFC frames after an abnormal reset. The hns3 driver notifies the firmware to disable pfc before reset. Fixes: 35d93a30040c ("net: hns3: adjust the process of PF reset") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: hns3: fix output information incomplete for dumping tx queue info with ↵Jie Wang
debugfs In function hns3_dump_tx_queue_info, The print buffer is not enough when the tx BD number is configured to 32760. As a result several BD information wouldn't be displayed. So fix it by increasing the tx queue print buffer length. Fixes: 630a6738da82 ("net: hns3: adjust string spaces of some parameters of tx bd info in debugfs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: dsa: rzn1-a5psw: disable learning for standalone portsClément Léger
When ports are in standalone mode, they should have learning disabled to avoid adding new entries in the MAC lookup table which might be used by other bridge ports to forward packets. While adding that, also make sure learning is enabled for CPU port. Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: dsa: rzn1-a5psw: fix STP states handlingAlexis Lothoré
stp_set_state() should actually allow receiving BPDU while in LEARNING mode which is not the case. Additionally, the BLOCKEN bit does not actually forbid sending forwarded frames from that port. To fix this, add a5psw_port_tx_enable() function which allows to disable TX. However, while its name suggest that TX is totally disabled, it is not and can still allow to send BPDUs even if disabled. This can be done by using forced forwarding with the switch tagging mechanism but keeping "filtering" disabled (which is already the case in the rzn1-a5sw tag driver). With these fixes, STP support is now functional. Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: dsa: rzn1-a5psw: enable management frames for CPU portClément Léger
Currently, management frame were discarded before reaching the CPU port due to a misconfiguration of the MGMT_CONFIG register. Enable them by setting the correct value in this register in order to correctly receive management frame and handle STP. Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13Merge tag 'block-6.4-2023-05-13' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "Just a few minor fixes for drivers, and a deletion of a file that is woefully out-of-date these days" * tag 'block-6.4-2023-05-13' of git://git.kernel.dk/linux: Documentation/block: drop the request.rst file ublk: fix command op code check block/rnbd: replace REQ_OP_FLUSH with REQ_OP_WRITE nbd: Fix debugfs_create_dir error checking
2023-05-13binder: add lockless binder_alloc_(set|get)_vma()Carlos Llamas
Bring back the original lockless design in binder_alloc to determine whether the buffer setup has been completed by the ->mmap() handler. However, this time use smp_load_acquire() and smp_store_release() to wrap all the ordering in a single macro call. Also, add comments to make it evident that binder uses alloc->vma to determine when the binder_alloc has been fully initialized. In these scenarios acquiring the mmap_lock is not required. Fixes: a43cfc87caaf ("android: binder: stop saving a pointer to the VMA") Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: stable@vger.kernel.org Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20230502201220.1756319-3-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13Revert "android: binder: stop saving a pointer to the VMA"Carlos Llamas
This reverts commit a43cfc87caaf46710c8027a8c23b8a55f1078f19. This patch fixed an issue reported by syzkaller in [1]. However, this turned out to be only a band-aid in binder. The root cause, as bisected by syzkaller, was fixed by commit 5789151e48ac ("mm/mmap: undo ->mmap() when mas_preallocate() fails"). We no longer need the patch for binder. Reverting such patch allows us to have a lockless access to alloc->vma in specific cases where the mmap_lock is not required. This approach avoids the contention that caused a performance regression. [1] https://lore.kernel.org/all/0000000000004a0dbe05e1d749e0@google.com [cmllamas: resolved conflicts with rework of alloc->mm and removal of binder_alloc_set_vma() also fixed comment section] Fixes: a43cfc87caaf ("android: binder: stop saving a pointer to the VMA") Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: stable@vger.kernel.org Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20230502201220.1756319-2-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13Revert "binder_alloc: add missing mmap_lock calls when using the VMA"Carlos Llamas
This reverts commit 44e602b4e52f70f04620bbbf4fe46ecb40170bde. This caused a performance regression particularly when pages are getting reclaimed. We don't need to acquire the mmap_lock to determine when the binder buffer has been fully initialized. A subsequent patch will bring back the lockless approach for this. [cmllamas: resolved trivial conflicts with renaming of alloc->mm] Fixes: 44e602b4e52f ("binder_alloc: add missing mmap_lock calls when using the VMA") Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: stable@vger.kernel.org Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20230502201220.1756319-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13binder: fix UAF caused by faulty buffer cleanupCarlos Llamas
In binder_transaction_buffer_release() the 'failed_at' offset indicates the number of objects to clean up. However, this function was changed by commit 44d8047f1d87 ("binder: use standard functions to allocate fds"), to release all the objects in the buffer when 'failed_at' is zero. This introduced an issue when a transaction buffer is released without any objects having been processed so far. In this case, 'failed_at' is indeed zero yet it is misinterpreted as releasing the entire buffer. This leads to use-after-free errors where nodes are incorrectly freed and subsequently accessed. Such is the case in the following KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in binder_thread_read+0xc40/0x1f30 Read of size 8 at addr ffff4faf037cfc58 by task poc/474 CPU: 6 PID: 474 Comm: poc Not tainted 6.3.0-12570-g7df047b3f0aa #5 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x48/0x60 print_report+0xf8/0x5b8 kasan_report+0xb8/0xfc __asan_load8+0x9c/0xb8 binder_thread_read+0xc40/0x1f30 binder_ioctl+0xd9c/0x1768 __arm64_sys_ioctl+0xd4/0x118 invoke_syscall+0x60/0x188 [...] Allocated by task 474: kasan_save_stack+0x3c/0x64 kasan_set_track+0x2c/0x40 kasan_save_alloc_info+0x24/0x34 __kasan_kmalloc+0xb8/0xbc kmalloc_trace+0x48/0x5c binder_new_node+0x3c/0x3a4 binder_transaction+0x2b58/0x36f0 binder_thread_write+0x8e0/0x1b78 binder_ioctl+0x14a0/0x1768 __arm64_sys_ioctl+0xd4/0x118 invoke_syscall+0x60/0x188 [...] Freed by task 475: kasan_save_stack+0x3c/0x64 kasan_set_track+0x2c/0x40 kasan_save_free_info+0x38/0x5c __kasan_slab_free+0xe8/0x154 __kmem_cache_free+0x128/0x2bc kfree+0x58/0x70 binder_dec_node_tmpref+0x178/0x1fc binder_transaction_buffer_release+0x430/0x628 binder_transaction+0x1954/0x36f0 binder_thread_write+0x8e0/0x1b78 binder_ioctl+0x14a0/0x1768 __arm64_sys_ioctl+0xd4/0x118 invoke_syscall+0x60/0x188 [...] ================================================================== In order to avoid these issues, let's always calculate the intended 'failed_at' offset beforehand. This is renamed and wrapped in a helper function to make it clear and convenient. Fixes: 32e9f56a96d8 ("binder: don't detect sender/target during buffer cleanup") Reported-by: Zi Fan Tan <zifantan@google.com> Cc: stable@vger.kernel.org Signed-off-by: Carlos Llamas <cmllamas@google.com> Acked-by: Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20230505203020.4101154-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAFGeorge Kennedy
After a call to console_unlock() in vcs_write() the vc_data struct can be freed by vc_port_destruct(). Because of that, the struct vc_data pointer must be reloaded in the while loop in vcs_write() after console_lock() to avoid a UAF when vcs_size() is called. Syzkaller reported a UAF in vcs_size(). BUG: KASAN: slab-use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215) Read of size 4 at addr ffff8880beab89a8 by task repro_vcs_size/4119 Call Trace: <TASK> __asan_report_load4_noabort (mm/kasan/report_generic.c:380) vcs_size (drivers/tty/vt/vc_screen.c:215) vcs_write (drivers/tty/vt/vc_screen.c:664) vfs_write (fs/read_write.c:582 fs/read_write.c:564) ... <TASK> Allocated by task 1213: kmalloc_trace (mm/slab_common.c:1064) vc_allocate (./include/linux/slab.h:559 ./include/linux/slab.h:680 drivers/tty/vt/vt.c:1078 drivers/tty/vt/vt.c:1058) con_install (drivers/tty/vt/vt.c:3334) tty_init_dev (drivers/tty/tty_io.c:1303 drivers/tty/tty_io.c:1415 drivers/tty/tty_io.c:1392) tty_open (drivers/tty/tty_io.c:2082 drivers/tty/tty_io.c:2128) chrdev_open (fs/char_dev.c:415) do_dentry_open (fs/open.c:921) vfs_open (fs/open.c:1052) ... Freed by task 4116: kfree (mm/slab_common.c:1016) vc_port_destruct (drivers/tty/vt/vt.c:1044) tty_port_destructor (drivers/tty/tty_port.c:296) tty_port_put (drivers/tty/tty_port.c:312) vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2)) vt_ioctl (drivers/tty/vt/vt_ioctl.c:903) tty_ioctl (drivers/tty/tty_io.c:2778) ... The buggy address belongs to the object at ffff8880beab8800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 424 bytes inside of freed 1024-byte region [ffff8880beab8800, ffff8880beab8c00) The buggy address belongs to the physical page: page:00000000afc77580 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbeab8 head:00000000afc77580 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 000fffffc0010200 ffff888100042dc0 ffffea000426de00 dead000000000002 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880beab8880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880beab8900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880beab8980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880beab8a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880beab8a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint Fixes: ac751efa6a0d ("console: rename acquire/release_console_sem() to console_lock/unlock()") Cc: stable <stable@kernel.org> Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/1683889728-10411-1-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13serial: qcom-geni: fix enabling deactivated interruptKrzysztof Kozlowski
The driver have a race, experienced only with PREEMPT_RT patchset: CPU0 | CPU1 ================================================================== qcom_geni_serial_probe | uart_add_one_port | | serdev_drv_probe | qca_serdev_probe | serdev_device_open | uart_open | uart_startup | qcom_geni_serial_startup | enable_irq | __irq_startup | WARN_ON() | IRQ not activated request_threaded_irq | irq_domain_activate_irq | The warning: 894000.serial: ttyHS1 at MMIO 0x894000 (irq = 144, base_baud = 0) is a MSM serial serial0: tty port ttyHS1 registered WARNING: CPU: 7 PID: 107 at kernel/irq/chip.c:241 __irq_startup+0x78/0xd8 ... qcom_geni_serial 894000.serial: serial engine reports 0 RX bytes in! Adding UART port triggers probe of child serial devices - serdev and eventually Qualcomm Bluetooth hci_qca driver. This opens UART port which enables the interrupt before it got activated in request_threaded_irq(). The issue originates in commit f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup") and discussion on mailing list [1]. However the above commit does not explain why the uart_add_one_port() is moved above requesting interrupt. [1] https://lore.kernel.org/all/5d9f3dfa.1c69fb81.84c4b.30bf@mx.google.com/ Fixes: f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup") Cc: <stable@vger.kernel.org> Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20230505152301.2181270-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13serial: 8250_bcm7271: fix leak in `brcmuart_probe`Doug Berger
Smatch reports: drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn: 'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032. The issue is fixed by using a managed clock. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Reported-by: XuDong Liu <m202071377@hust.edu.cn> Link: https://lore.kernel.org/lkml/20230424125100.4783-1-m202071377@hust.edu.cn/ Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230427181916.2983697-3-opendmb@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-24 23:14:40 +0000