summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-12-22ath9k: Use pci_is_pcie()Hauke Mehrtens
Use function pci_is_pcie() instead of accessing struct member directly. CC: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22ath5k: Use pci_is_pcie()Hauke Mehrtens
Use function pci_is_pcie() instead of accessing struct member directly. CC: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22rt2x00: Use pci_is_pcie()Hauke Mehrtens
Use function pci_is_pcie() instead of accessing struct member directly. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22ssb: Use pci_is_pcie()Hauke Mehrtens
Use function pci_is_pcie() instead of accessing struct member directly. CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22wl12xx: remove unnecessary importHauke Mehrtens
No function declared in gpio.h is used here. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22wl1251: remove unnecessary importHauke Mehrtens
No function declared in gpio.h is used here. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22ath9k: fix aphy / wiphy idle mismatchLuis R. Rodriguez
ath9k supports its own set of virtual wiphys, and it uses the mac80211 idle notifications to know when a device needs to be idle or not. We recently changed ath9k to force idle on driver stop() and on resume but forgot to take into account ath9k's own virtual wiphy idle states. These are used internally by ath9k to check if the device's radio should be powered down on each idle call. Without this change its possible that the device could have been forced off but the virtual wiphy idle was left on. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22ath9k: Fix warnings on card removalRajkumar Manoharan
The recently added warning message on power change failure is not needed on device removal. ath: Failed to wakeup in 500us ------------[ cut here ]------------ WARNING: at drivers/net/wireless/ath/ath9k/hw.c:1618 ath9k_hw_setpower+0x61f/0x630 [ath9k_hw]() Hardware name: 64756D6 Pid: 540, comm: kworker/u:3 Not tainted 2.6.37-rc6-wl #37 Call Trace: [<ffffffff810501aa>] warn_slowpath_common+0x7a/0xb0 [<ffffffffa056e280>] ? ath9k_iowrite32+0x0/0x90 [ath9k] [<ffffffff810501f5>] warn_slowpath_null+0x15/0x20 [<ffffffffa05226ef>] ath9k_hw_setpower+0x61f/0x630 [ath9k_hw] [<ffffffffa05700e5>] ath9k_ps_wakeup+0x85/0xd0 [ath9k] [<ffffffffa0570685>] ath9k_configure_filter+0x25/0x80 [ath9k] [<ffffffffa04dde43>] ieee80211_configure_filter+0x133/0x190 [mac80211] [<ffffffffa04ee502>] ieee80211_do_stop+0x132/0x540 [mac80211] [<ffffffff813466ff>] ? _raw_spin_unlock_bh+0x1f/0x30 [<ffffffff812b6923>] ? dev_deactivate+0x1c3/0x1e0 [<ffffffffa04ee925>] ieee80211_stop+0x15/0x20 [mac80211] [<ffffffff8129d1b6>] __dev_close+0x56/0x90 Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22ath9k_htc: Fix warning on device removalSujith Manoharan
The commit "ath9k_hw: warn if we cannot change the power to the chip" introduced a new warning to indicate chip powerup failures, but this is not required for devices that have been removed. Handle USB device removal properly by checking for unplugged status. For PCI devices, this warning will still be seen when the card is pulled out, not sure how to check for card removal. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22USB: Merge 2.6.37-rc5 into usb-nextGreg Kroah-Hartman
This is to resolve the conflict in the file, drivers/usb/gadget/composite.c that was due to a revert in Linus's tree needed for the 2.6.37 release. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-22Merge branch 'integration-2.6.38-for-tony' of git://git.pwsan.com/linux-2.6 ↵Tony Lindgren
into omap-for-linus
2010-12-22Merge branches 'devel-gpmc' and 'devel-misc' into omap-for-linusTony Lindgren
2010-12-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-1000.c drivers/net/wireless/iwlwifi/iwl-6000.c drivers/net/wireless/iwlwifi/iwl-core.h
2010-12-22Keyboard: omap-keypad: use matrix_keypad.hJanusz Krzysztofik
Most keypad drivers make use of the <linux/input/matrix_keypad.h> defined macros, structures and inline functions. Convert omap-keypad driver to use those as well, as suggested by a compile time warning, hardcoded into the OMAP <palt/keypad.h>. Created against linux-2.6.37-rc5. Tested on Amstrad Delta. Compile tested with omap1_defconfig and omap2plus_defconfig shrinked to board-h4. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Reviewed-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22rtl818x: move rtl8180 and rtl8187 to separate subdirectoriesJohn W. Linville
These drivers share one header file, but nothing else. Worse, both drivers use the rtl8225 part with different register settings. The results has been some ugly naming -- let's simplify that. Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
2010-12-22mfd: Support additional parent IDs for wm831xMark Brown
Some newer device revisions add a second parent ID. Support this in the device validity checks done at startup. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-22mfd: Fix ab8500-core interrupt ffs bit bugMattias Wallin
We want to find the first set bit on value, not status. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-22mfd: Supply IRQ base for WM832x devicesMark Brown
Without this the IRQ base will not be correctly configured for the subdevices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-22watchdog: Fix null pointer dereference while accessing rdc321x platform_dataFlorian Fainelli
rdc321x-wdt currently fetches its driver specific data by using the platform_device->platform_data pointer, this is wrong because the mfd device which registers our platform_device has been added using mfd_add_device() which sets the platform_device->driver_data pointer instead. Signed-off-by: Florian Fainelli <florian@openwrt.org> CC: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-22gpio: Fix null pointer dereference while accessing rdc321x platform_dataFlorian Fainelli
rdc321x-gpio currently fetches its driver specific data by using the platform_device->platform_data pointer, this is wrong because the mfd device which registers our platform_device has been added using mfd_add_device() which sets the platform_device->driver_data pointer instead. Signed-off-by: Florian Fainelli <florian@openwrt.org> CC: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-22Merge commit 'v2.6.37-rc7' into perf/coreIngo Molnar
Merge reason: Pick up the latest -rc. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-22Input: synaptics - ignore bogus mt packetHenrik Rydberg
In multitouch mode, at least one device (fw: 7.4 id: 0x1c0b1) sometimes sends a final main packet with x == 1. Since the normal values are above 1472, this is clearly bogus. At the same time, a two-finger touch is signaled, even though only one finger was on the pad to begin with. This patch ignores the packet altogether, removing the problem. Acked-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-22ux500: rename modem IRQ and MBOX filesLinus Walleij
Suffix the U5500 modem IRQ and MBOX files with *-db5500* so that we clearly know the SoC they belong to, in line with the rest of the files in mach-ux500. Cc: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> Cc: Martin Persson <martin.persson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-22fbdev: sh-mobile: retrieve and propagate display sizes from EDIDGuennadi Liakhovetski
Monitor EDID contains information about physical display sizes. Retrieve it and propagate to the framebuffer driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22fbdev: sh-mobile: restore display size configurationGuennadi Liakhovetski
An earlier patch replaced open-coded video-mode configuration from platform data by a call to fb_videomode_to_var(), thereby setting ofdisplay sizes have been accidentally lost. Restore them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22Merge commit 'v2.6.37-rc7' into spi/nextGrant Likely
2010-12-21USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)Melchior FRANZ
So far the USBLED driver only supports Delcom's "USB Visual Signal Indicator" (http://www.delcomproducts.com/products_USBLMP.asp). The driver generates virtual files "red", "green", and "blue" under the device's /sys/ directory, where color values can be read from and written to. This patch adds support for Dream Cheeky's "DL100B Webmail Notifier" (http://www.dreamcheeky.com/webmail-notifier -- available from several shops, such as http://www.conrad.at/ce/de/product/777048/USB-WEBMAIL). This device isn't as pretty as Delcom's, but it's *far* cheaper, and its 3 LEDs can be set in 32 brightness steps each. The grey envelope contour can easily be removed, leaving a rather neutral white box (with a few small holes), which is useful for generic signalling purposes. Of course, the small circuit board can easily be put into a prettier case. The DL100B device pretends to be a HID, but the HID descriptor shows that it's not overly useful as such (see below). The patch therefore removes the "HID-ness" (hid-core.c, hid-ids.h), and adds the necessary commands to usbled.c. The protocol info comes from the developer's manual that Dream Cheeky kindly provided (815DeveloperManual.pdf). HID descriptor: 0: 05 01 Usage Page 'Generic Desktop Controls' 2: 09 10 Usage 'Reserved' 4: a1 01 Collection 'Application (mouse, keyboard)' 6: 05 00 Usage Page 'Undefined' 8: 19 10 Usage Minimum = 16 10: 29 11 Usage Maximum = 17 12: 15 00 Logical Minimum = 0 14: 25 0f Logical Maximum = 15 16: 75 08 Report Size = 8 18: 95 08 Report Count = 8 20: 91 02 Output data *var abs lin pref-state null-pos non-vol bit-field 22: 19 10 Usage Minimum = 16 24: 29 11 Usage Maximum = 17 26: 15 00 Logical Minimum = 0 28: 25 0f Logical Maximum = 15 30: 75 08 Report Size = 8 32: 95 08 Report Count = 8 34: 81 00 Input data array abs lin pref-state null-pos non-vol bit-field 36: c0 End Collection Signed-off-by: Melchior FRANZ <mfranz@aon.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-21OMAP2+: powerdomain: move header file from plat-omap to mach-omap2Paul Walmsley
The OMAP powerdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h to mach-omap2/powerdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access powerdomain code and data directly. As part of this process, remove the references to powerdomain data from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap. Change the DSPBridge code to point to the new location for the powerdomain headers. The DSPBridge code should not be including the powerdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com>
2010-12-21OMAP2+: clockdomain: move header file from plat-omap to mach-omap2Paul Walmsley
The OMAP clockdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/clockdomain.h to mach-omap2/clockdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access clockdomain code and data directly. DSPBridge also uses the clockdomain headers for some reason, so, modify it also. The DSPBridge code should not be including the clockdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22sisfb: eliminate compiler warningsAaro Koskinen
Convert some bit masks to 8-bit values to avoid the following compiler warnings: drivers/video/sis/sis_main.c:3858: warning: large integer implicitly truncated to unsigned type drivers/video/sis/init301.c:5855: warning: large integer implicitly truncated to unsigned type drivers/video/sis/init301.c:5869: warning: large integer implicitly truncated to unsigned type Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: delete unused register I/O macrosAaro Koskinen
Delete unused register I/O macros. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace setSISIDXREG with SiS_SetRegANDORAaro Koskinen
Replace setSISIDXREG() with SiS_SetRegANDOR(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace andSISIDXREG with SiS_SetRegANDAaro Koskinen
Replace andSISIDXREG() with SiS_SetRegAND(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace orSISIDXREG with SiS_SetRegORAaro Koskinen
Replace orSISIDXREG() with SiS_SetRegOR(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace outSISIDXREG with SiS_SetRegAaro Koskinen
Replace outSISIDXREG() with SiS_SetReg(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace inSISIDXREG with SiS_GetRegAaro Koskinen
Replace inSISIDXREG() with SiS_GetReg(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace outSISREG with SiS_SetRegByteAaro Koskinen
Replace outSISREG() with SiS_SetRegByte(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace inSISREG with SiS_GetRegByteAaro Koskinen
Replace inSISREG() with SiS_GetRegByte(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: change register I/O functions to use fixed size typesAaro Koskinen
Use fixed-sized types (u8, u16, u32) instead of plain C types. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: remove duplicate function declarationsAaro Koskinen
Remove duplicate register I/O function declarations by moving them into a common header file. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: delete HAVE_CONFIG_H checksAaro Koskinen
Delete unneeded HAVE_CONFIG_H checks. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: eliminate unused variable compiler warningAaro Koskinen
Eliminate the following compiler warning on non-x86 platforms by limiting the variable scope: drivers/video/sis/sis_main.c:4108: warning: unused variable 'temp' Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2010-12-21OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific filesPaul Walmsley
In preparation for adding OMAP4-specific PRCM accessor/mutator functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific files. Most of what was in mach-omap2/{cm,prm}.{c,h} has now been moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was OMAP2xxx/3xxx-specific. This process also requires the #includes in each of these files to be changed to reference the new file name. As part of doing so, add some comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use "sideways includes", to indicate that these users of the PRM/CM includes should not be doing so. Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-21Merge branch 'pm-next' of ↵Tony Lindgren
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2010-12-22drm: Include the connector name in the output_poll_execute() debug messageChris Wilson
Always useful to know just which connector was polled and had its status updated. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-22drm/radeon/kms: fix bug in r600_gpu_is_lockupAlex Deucher
We were using the lockup struct from the wrong union. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21Merge branch '20101221_static_const' of git://repo.or.cz/linux-2.6/trivial-modsDavid S. Miller
2010-12-21sundance: Program station address into HWDenis Kirjanov
Program adapter's StationAddress register when changing device MAC address Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-21sundance: Wrap up acceess to ASICCtrl high word with a macroDenis Kirjanov
Wrap up acceess to ASICCtrl high word with a macro Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 23:20:33 +0000