summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-04-23ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failureMarc Zyngier
When failing the driver probe because of invalid firmware properties, the GTDT driver unmaps the interrupt that it mapped earlier. However, it never checks whether the mapping of the interrupt actially succeeded. Even more, should the firmware report an illegal interrupt number that overlaps with the GIC SGI range, this can result in an IPI being unmapped, and subsequent fireworks (as reported by Dann Frazier). Rework the driver to have a slightly saner behaviour and actually check whether the interrupt has been mapped before unmapping things. Reported-by: dann frazier <dann.frazier@canonical.com> Fixes: ca9ae5ec4ef0 ("acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver") Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/YH87dtTfwYgavusz@xps13.dannf Cc: <stable@vger.kernel.org> Cc: Fu Wei <wefu@redhat.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: dann frazier <dann.frazier@canonical.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20210421164317.1718831-2-maz@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-23pwm: mediatek: Remove unused functionJiapeng Chong
Fix the following clang warning: drivers/pwm/pwm-mediatek.c:110:19: warning: unused function 'pwm_mediatek_readl' [-Wunused-function]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-04-23pwm: pca9685: Improve runtime PM behaviorClemens Gruber
The chip does not come out of POR in active state but in sleep state. To be sure (in case the bootloader woke it up) we force it to sleep in probe. If runtime PM is disabled, we instead wake the chip in .probe and put it to sleep in .remove. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-04-23pwm: pca9685: Support hardware readoutClemens Gruber
Implement .get_state to read-out the current hardware state. The hardware readout may return slightly different values than those that were set in apply due to the limited range of possible prescale and counter register values. Also note that although the datasheet mentions 200 Hz as default frequency when using the internal 25 MHz oscillator, the calculated period from the default prescaler register setting of 30 is 5079040ns. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-04-23pwm: pca9685: Switch to atomic APIClemens Gruber
The switch to the atomic API goes hand in hand with a few fixes to previously experienced issues: - The duty cycle is no longer lost after disable/enable (previously the OFF registers were cleared in disable and the user was required to call config to restore the duty cycle settings) - If one sets a period resulting in the same prescale register value, the sleep and write to the register is now skipped - Previously, only the full ON bit was toggled in GPIO mode (and full OFF cleared if set to high), which could result in both full OFF and full ON not being set and on=0, off=0, which is not allowed according to the datasheet - The OFF registers were reset to 0 in probe, which could lead to the forbidden on=0, off=0. Fixed by resetting to POR default (full OFF) Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-04-23md/raid1: properly indicate failure when ending a failed write requestPaul Clements
This patch addresses a data corruption bug in raid1 arrays using bitmaps. Without this fix, the bitmap bits for the failed I/O end up being cleared. Since we are in the failure leg of raid1_end_write_request, the request either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded). Fixes: eeba6809d8d5 ("md/raid1: end bio when the device faulty") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Paul Clements <paul.clements@us.sios.com> Signed-off-by: Song Liu <song@kernel.org>
2021-04-23md-cluster: fix use-after-free issue when removing rdevHeming Zhao
md_kick_rdev_from_array will remove rdev, so we should use rdev_for_each_safe to search list. How to trigger: env: Two nodes on kvm-qemu x86_64 VMs (2C2G with 2 iscsi luns). ``` node2=192.168.0.3 for i in {1..20}; do echo ==== $i `date` ====; mdadm -Ss && ssh ${node2} "mdadm -Ss" wipefs -a /dev/sda /dev/sdb mdadm -CR /dev/md0 -b clustered -e 1.2 -n 2 -l 1 /dev/sda \ /dev/sdb --assume-clean ssh ${node2} "mdadm -A /dev/md0 /dev/sda /dev/sdb" mdadm --wait /dev/md0 ssh ${node2} "mdadm --wait /dev/md0" mdadm --manage /dev/md0 --fail /dev/sda --remove /dev/sda sleep 1 done ``` Crash stack: ``` stack segment: 0000 [#1] SMP ... ... RIP: 0010:md_check_recovery+0x1e8/0x570 [md_mod] ... ... RSP: 0018:ffffb149807a7d68 EFLAGS: 00010207 RAX: 0000000000000000 RBX: ffff9d494c180800 RCX: ffff9d490fc01e50 RDX: fffff047c0ed8308 RSI: 0000000000000246 RDI: 0000000000000246 RBP: 6b6b6b6b6b6b6b6b R08: ffff9d490fc01e40 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff9d494c180818 R14: ffff9d493399ef38 R15: ffff9d4933a1d800 FS: 0000000000000000(0000) GS:ffff9d494f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe68cab9010 CR3: 000000004c6be001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: raid1d+0x5c/0xd40 [raid1] ? finish_task_switch+0x75/0x2a0 ? lock_timer_base+0x67/0x80 ? try_to_del_timer_sync+0x4d/0x80 ? del_timer_sync+0x41/0x50 ? schedule_timeout+0x254/0x2d0 ? md_start_sync+0xe0/0xe0 [md_mod] ? md_thread+0x127/0x160 [md_mod] md_thread+0x127/0x160 [md_mod] ? wait_woken+0x80/0x80 kthread+0x10d/0x130 ? kthread_park+0xa0/0xa0 ret_from_fork+0x1f/0x40 ``` Fixes: dbb64f8635f5d ("md-cluster: Fix adding of new disk with new reload code") Fixes: 659b254fa7392 ("md-cluster: remove a disk asynchronously from cluster environment") Cc: stable@vger.kernel.org Reviewed-by: Gang He <ghe@suse.com> Signed-off-by: Heming Zhao <heming.zhao@suse.com> Signed-off-by: Song Liu <song@kernel.org>
2021-04-23iavf: redefine the magic number for FDIR GTP-U header fieldsHaiyue Wang
The flex-byte for GTP-U protocol header fields uses the magic number, which is hard to maintain and understand, define the interested fields with meaningful macro name, based on the GTP-U protocol stack: GTP-U header +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 0x1 |1|0|1|0|0| 0xff | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | TEID = 1654 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Sequence Number = 0 |N-PDU Number=0 |NextExtHdr=0x85| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ GTP-U Extension Header (PDU Session Container) +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ExtHdrLen=2 |Type=0 | Spare |0|0| QFI | PPI | Spare | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Padding |NextExtHdr=0x0 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23iavf: enhance the duplicated FDIR list scan handlingHaiyue Wang
When the FDIR entry is found, just return the result directly to break the loop. Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23iavf: change the flex-byte support number to macro definitionHaiyue Wang
The maximum number (2) of flex-byte support is derived from ethtool use-def data size (8 byte). Change the magic number 2 to macro definition, and add the comment to track the design thinking, so the code is clear and easily maintained. Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23iavf: remove duplicate free resources callsStefan Assmann
Both iavf_free_all_tx_resources() and iavf_free_all_rx_resources() have already been called in the very same function. Remove the duplicate calls. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: use minimal admin queue for kdumpCoiby Xu
The minimum size of admin send/receive queue is 1 and 2 respectively. The admin send queue can't be set to 1 because in that case, the firmware would fail to init. Signed-off-by: Coiby Xu <coxu@redhat.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: use minimal Rx and Tx ring buffers for kdumpCoiby Xu
Use the minimum of the number of descriptors thus we will allocate the minimal ring buffers for kdump. Signed-off-by: Coiby Xu <coxu@redhat.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: use minimal Tx and Rx pairs for kdumpCoiby Xu
Set the number of the MSI-X vectors to 1. When MSI-X is enabled, it's not allowed to use more TC queue pairs than MSI-X vectors (pf->num_lan_msix) exist. Thus the number of Tx and Rx pairs (vsi->num_queue_pairs) will be equal to the number of MSI-X vectors, i.e., 1. Signed-off-by: Coiby Xu <coxu@redhat.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: refactor repeated link state reporting codeAleksandr Loktionov
Refactor repeated link state reporting code into a separate helper functions: i40e_set_vf_link_state() i40e_vc_link_speed2mbps(). Add support of VIRTCHNL_VF_CAP_ADV_LINK_SPEED; Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23spi: Rename enable1 to activate in spi_set_cs()Andy Shevchenko
The enable1 is confusing name. Change it to clearly show what is the intention behind it. No functional changes. Fixes: 25093bdeb6bc ("spi: implement SW control for CS times") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210420131846.75983-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23regulator: fan53555: Add TCS4525 DCDC supportJoseph Chen
TCS4525 main features: - 2.7V to 5.5V Input Voltage Range; - 3MHz Constant Switching Frequency; - 5A Available Load Current; - Programmable Output Voltage: 0.6V to 1.4V in 6.25mV Steps; - PFM/PWM Operation for Optimum Increased Efficiency; Signed-off-by: Joseph Chen <chenjh@rock-chips.com> [Ezequiel: Forward port] Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Link: https://lore.kernel.org/r/20210421210338.43819-3-ezequiel@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23drm/ttm: fix error handling if no BO can be swapped out v4Shiwu Zhang
In case that all pre-allocated BOs are busy, just continue to populate BOs since likely half of system memory in total is still free. v4 (chk): fix code moved to VMWGFX as well Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210422115757.3946-1-christian.koenig@amd.com
2021-04-23irqchip/gic-v3: Do not enable irqs when handling spurious interrupsHe Ying
We triggered the following error while running our 4.19 kernel with the pseudo-NMI patches backported to it: [ 14.816231] ------------[ cut here ]------------ [ 14.816231] kernel BUG at irq.c:99! [ 14.816232] Internal error: Oops - BUG: 0 [#1] SMP [ 14.816232] Process swapper/0 (pid: 0, stack limit = 0x(____ptrval____)) [ 14.816233] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.19.95.aarch64 #14 [ 14.816233] Hardware name: evb (DT) [ 14.816234] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 14.816234] pc : asm_nmi_enter+0x94/0x98 [ 14.816235] lr : asm_nmi_enter+0x18/0x98 [ 14.816235] sp : ffff000008003c50 [ 14.816235] pmr_save: 00000070 [ 14.816237] x29: ffff000008003c50 x28: ffff0000095f56c0 [ 14.816238] x27: 0000000000000000 x26: ffff000008004000 [ 14.816239] x25: 00000000015e0000 x24: ffff8008fb916000 [ 14.816240] x23: 0000000020400005 x22: ffff0000080817cc [ 14.816241] x21: ffff000008003da0 x20: 0000000000000060 [ 14.816242] x19: 00000000000003ff x18: ffffffffffffffff [ 14.816243] x17: 0000000000000008 x16: 003d090000000000 [ 14.816244] x15: ffff0000095ea6c8 x14: ffff8008fff5ab40 [ 14.816244] x13: ffff8008fff58b9d x12: 0000000000000000 [ 14.816245] x11: ffff000008c8a200 x10: 000000008e31fca5 [ 14.816246] x9 : ffff000008c8a208 x8 : 000000000000000f [ 14.816247] x7 : 0000000000000004 x6 : ffff8008fff58b9e [ 14.816248] x5 : 0000000000000000 x4 : 0000000080000000 [ 14.816249] x3 : 0000000000000000 x2 : 0000000080000000 [ 14.816250] x1 : 0000000000120000 x0 : ffff0000095f56c0 [ 14.816251] Call trace: [ 14.816251] asm_nmi_enter+0x94/0x98 [ 14.816251] el1_irq+0x8c/0x180 (IRQ C) [ 14.816252] gic_handle_irq+0xbc/0x2e4 [ 14.816252] el1_irq+0xcc/0x180 (IRQ B) [ 14.816253] arch_timer_handler_virt+0x38/0x58 [ 14.816253] handle_percpu_devid_irq+0x90/0x240 [ 14.816253] generic_handle_irq+0x34/0x50 [ 14.816254] __handle_domain_irq+0x68/0xc0 [ 14.816254] gic_handle_irq+0xf8/0x2e4 [ 14.816255] el1_irq+0xcc/0x180 (IRQ A) [ 14.816255] arch_cpu_idle+0x34/0x1c8 [ 14.816255] default_idle_call+0x24/0x44 [ 14.816256] do_idle+0x1d0/0x2c8 [ 14.816256] cpu_startup_entry+0x28/0x30 [ 14.816256] rest_init+0xb8/0xc8 [ 14.816257] start_kernel+0x4c8/0x4f4 [ 14.816257] Code: 940587f1 d5384100 b9401001 36a7fd01 (d4210000) [ 14.816258] Modules linked in: start_dp(O) smeth(O) [ 15.103092] ---[ end trace 701753956cb14aa8 ]--- [ 15.103093] Kernel panic - not syncing: Fatal exception in interrupt [ 15.103099] SMP: stopping secondary CPUs [ 15.103100] Kernel Offset: disabled [ 15.103100] CPU features: 0x36,a2400218 [ 15.103100] Memory Limit: none which is cause by a 'BUG_ON(in_nmi())' in nmi_enter(). From the call trace, we can find three interrupts (noted A, B, C above): interrupt (A) is preempted by (B), which is further interrupted by (C). Subsequent investigations show that (B) results in nmi_enter() being called, but that it actually is a spurious interrupt. Furthermore, interrupts are reenabled in the context of (B), and (C) fires with NMI priority. We end-up with a nested NMI situation, something we definitely do not want to (and cannot) handle. The bug here is that spurious interrupts should never result in any state change, and we should just return to the interrupted context. Moving the handling of spurious interrupts as early as possible in the GICv3 handler fixes this issue. Fixes: 3f1f3234bc2d ("irqchip/gic-v3: Switch to PMR masking before calling IRQ handler") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: He Ying <heying24@huawei.com> [maz: rewrote commit message, corrected Fixes: tag] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210423083516.170111-1-heying24@huawei.com Cc: stable@vger.kernel.org
2021-04-23regulator: core: Fix off_on_delay handlingVincent Whitchurch
The jiffies-based off_on_delay implementation has a couple of problems that cause it to sometimes not actually delay for the required time: (1) If, for example, the off_on_delay time is equivalent to one jiffy, and the ->last_off_jiffy is set just before a new jiffy starts, then _regulator_do_enable() does not wait at all since it checks using time_before(). (2) When jiffies overflows, the value of "remaining" becomes higher than "max_delay" and the code simply proceeds without waiting. Fix these problems by changing it to use ktime_t instead. [Note that since jiffies doesn't start at zero but at INITIAL_JIFFIES ("-5 minutes"), (2) above also led to the code not delaying if the first regulator_enable() is called when the ->last_off_jiffy is not initialised, such as for regulators with ->constraints->boot_on set. It's not clear to me if this was intended or not, but I've preserved this behaviour explicitly with the check for a non-zero ->last_off.] Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20210423114524.26414-1-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23Merge branch 'for-5.12' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-5.13
2021-04-23Merge tag 'kvmarm-5.13' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for Linux 5.13 New features: - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler - Alexandru is now a reviewer (not really a new feature...) Fixes: - Proper emulation of the GICR_TYPER register - Handle the complete set of relocation in the nVHE EL2 object - Get rid of the oprofile dependency in the PMU code (and of the oprofile body parts at the same time) - Debug and SPE fixes - Fix vcpu reset
2021-04-23usb: dwc3: gadget: Handle DEV_TXF_FLUSH_BYPASS capabilityThinh Nguyen
DWC_usb32 IP introduces a new behavior when handling NoStream event for IN endpoints. If the controller is capable of DEV_TXF_FLUSH_BYPASS, then the driver does not need to force to restart stream for IN endpoints. The controller will generate ERDY and restart the stream periodically. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/65c3070c666cd6b8beeee62d7f8e3e704ebf2d32.1619134559.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-23usb: dwc3: Capture new capability register GHWPARAMS9Thinh Nguyen
DWC_usb32 introduces a new HW capability register GHWPARAMS9. Capture this in the dwc->hwparams.hwparams9 field. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/f76cc4a9c8c4ab325f5babe03c57b039166360b0.1619134559.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-23soc: aspeed: fix a ternary sign expansion bugDan Carpenter
The intent here was to return negative error codes but it actually returns positive values. The problem is that type promotion with ternary operations is quite complicated. "ret" is an int. "copied" is a u32. And the snoop_file_read() function returns long. What happens is that "ret" is cast to u32 and becomes positive then it's cast to long and it's still positive. Fix this by removing the ternary so that "ret" is type promoted directly to long. Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Patrick Venture <venture@google.com> Link: https://lore.kernel.org/r/YIE90PSXsMTa2Y8n@mwanda Link: https://lore.kernel.org/r/20210423000919.1249474-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-23mmc: block: Update ext_csd.cache_ctrl if it was writtenAvri Altman
The cache function can be turned ON and OFF by writing to the CACHE_CTRL byte (EXT_CSD byte [33]). However, card->ext_csd.cache_ctrl is only set on init if cache size > 0. Fix that by explicitly setting ext_csd.cache_ctrl on ext-csd write. Signed-off-by: Avri Altman <avri.altman@wdc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210420134641.57343-3-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23xen-pciback: simplify vpci's find hookJan Beulich
There's no point in comparing SBDF - we can simply compare the struct pci_dev pointers. If they weren't the same for a given device, we'd have bigger problems from having stored a stale pointer. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/158273a2-d1b9-3545-b25d-affca867376c@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-04-23xen-blkfront: Fix 'physical' typosBjorn Helgaas
Fix misspelling of "physical". Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20210126205509.2917606-1-helgaas@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-04-23xen-blkback: fix compatibility bug with single page ringsPaul Durrant
Prior to commit 4a8c31a1c6f5 ("xen/blkback: rework connect_ring() to avoid inconsistent xenstore 'ring-page-order' set by malicious blkfront"), the behaviour of xen-blkback when connecting to a frontend was: - read 'ring-page-order' - if not present then expect a single page ring specified by 'ring-ref' - else expect a ring specified by 'ring-refX' where X is between 0 and 1 << ring-page-order This was correct behaviour, but was broken by the afforementioned commit to become: - read 'ring-page-order' - if not present then expect a single page ring (i.e. ring-page-order = 0) - expect a ring specified by 'ring-refX' where X is between 0 and 1 << ring-page-order - if that didn't work then see if there's a single page ring specified by 'ring-ref' This incorrect behaviour works most of the time but fails when a frontend that sets 'ring-page-order' is unloaded and replaced by one that does not because, instead of reading 'ring-ref', xen-blkback will read the stale 'ring-ref0' left around by the previous frontend will try to map the wrong grant reference. This patch restores the original behaviour. Fixes: 4a8c31a1c6f5 ("xen/blkback: rework connect_ring() to avoid inconsistent xenstore 'ring-page-order' set by malicious blkfront") Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20210202175659.18452-1-paul@xen.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-04-23xen: Remove support for PV ACPI cpu/memory hotplugBoris Ostrovsky
Commit 76fc253723ad ("xen/acpi-stub: Disable it b/c the acpi_processor_add is no longer called.") declared as BROKEN support for Xen ACPI stub (which is required for xen-acpi-{cpu|memory}-hotplug) and suggested that this is temporary and will be soon fixed. This was in March 2013. Further, commit cfafae940381 ("xen: rename dom0_op to platform_op") renamed an interface used by memory hotplug code without updating that code (as it was BROKEN and therefore not compiled). This was in November 2015 and has gone unnoticed for over 5 year. It is now clear that this code is of no interest to anyone and therefore should be removed. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/1618336344-3162-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-04-23mmc: mmc_spi: Make of_mmc_spi.c resource provider agnosticAndy Shevchenko
In order to use the same driver on non-OF platforms, make of_mmc_spi.c resource provider agnostic. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-6-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23mmc: mmc_spi: Use already parsed IRQAndy Shevchenko
SPI core already parses and maps IRQ for us if provided. Use it instead of double parsing in mmc_spi_get_pdata(). Due to above, change condition, since SPI core can hold an error pointer as invalid IRQ. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-5-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23mmc: mmc_spi: Drop unused NO_IRQ definitionAndy Shevchenko
After the commit 073350f7b562 ("mmc: mmc_spi: Fix return value evaluation of irq_of_parse_and_map()") the NO_IRQ is not used anymore, drop it for good. Fixes: 073350f7b562 ("mmc: mmc_spi: Fix return value evaluation of irq_of_parse_and_map()") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-4-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23mmc: mmc_spi: Set up polling even if voltage-ranges is not presentAndy Shevchenko
When voltage-ranges property is not present the driver assumes that it is 3.3v (3.2v..3.4v). But at the same time it disallows polling. Fix that by dropping the comparison to 0 when no property is provided. While at it, mark voltage-ranges property optional as it was initially. Fixes: 9c43df57910b ("mmc_spi: Add support for OpenFirmware bindings") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-3-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23mmc: core: Convert mmc_of_parse_voltage() to use device property APIAndy Shevchenko
mmc_of_parse() for a few years has been using device property API. Convert mmc_of_parse_voltage() as well. At the same time switch users to new API. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-2-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23mmc: core: Correct descriptions in mmc_of_parse()Andy Shevchenko
Since it has been converted to use device property API, the function and field descriptions become outdated. Correct them. Fixes: 73a47a9bb3e2 ("mmc: core: Use device_property_read instead of of_property_read") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23xen/pciback: Fix incorrect type warningsMuhammad Usama Anjum
Correct enum pci_channel_io_normal should be used instead of putting integer value 1. Fix following smatch warnings: drivers/xen/xen-pciback/pci_stub.c:805:40: warning: incorrect type in argument 2 (different base types) drivers/xen/xen-pciback/pci_stub.c:805:40: expected restricted pci_channel_state_t [usertype] state drivers/xen/xen-pciback/pci_stub.c:805:40: got int drivers/xen/xen-pciback/pci_stub.c:862:40: warning: incorrect type in argument 2 (different base types) drivers/xen/xen-pciback/pci_stub.c:862:40: expected restricted pci_channel_state_t [usertype] state drivers/xen/xen-pciback/pci_stub.c:862:40: got int drivers/xen/xen-pciback/pci_stub.c:973:31: warning: incorrect type in argument 2 (different base types) drivers/xen/xen-pciback/pci_stub.c:973:31: expected restricted pci_channel_state_t [usertype] state drivers/xen/xen-pciback/pci_stub.c:973:31: got int Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210326181442.GA1735905@LEGION Signed-off-by: Juergen Gross <jgross@suse.com>
2021-04-23Merge tag 'drm-misc-next-fixes-2021-04-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next A few fixes for the next merge window, with some build fixes for anx7625 and lt8912b bridges, incorrect error handling for lt8912b and TTM, and one fix for TTM page limit accounting. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210422163329.dvbuwre3akwdmzjt@gilmour
2021-04-23Merge tag 'drm-intel-fixes-2021-04-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - GVT's BDW regression fix for cmd parser (Zhenyu) - Fix modesetting in case of unexpected AUX timeouts (Imre) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YIGZ3pQPgPQtZtyI@intel.com
2021-04-23Merge tag 'amd-drm-fixes-5.12-2021-04-21' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.12-2021-04-21: amdgpu: - Fix gpuvm page table update issue - Modifier fixes - Register fix for dimgrey cavefish Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210421220456.3839-1-alexander.deucher@amd.com
2021-04-22Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "Very late in the cycle but both risky if left unfixed and more or less obvious.." * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails vhost-vdpa: protect concurrent access to vhost device iotlb
2021-04-22vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs failsEli Cohen
Set err = -ENOMEM if dma_map_sg_attrs() fails so the function reutrns error. Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code") Signed-off-by: Eli Cohen <elic@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210411083646.910546-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2021-04-22vhost-vdpa: protect concurrent access to vhost device iotlbXie Yongji
Protect vhost device iotlb by vhost_dev->mutex. Otherwise, it might cause corruption of the list and interval tree in struct vhost_iotlb if userspace sends the VHOST_IOTLB_MSG_V2 message concurrently. Fixes: 4c8cf318("vhost: introduce vDPA-based backend") Cc: stable@vger.kernel.org Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210412095512.178-1-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-22stmmac: intel: Enable HW descriptor prefetch by defaultMohammad Athari Bin Ismail
Enable HW descriptor prefetch by default by setting plat->dma_cfg->dche = true in intel_mgbe_common_data(). Need to be noted that this capability only be supported in DWMAC core version 5.20 onwards. In stmmac, there is a checking to check the core version. If the core version is below 5.20, this capability wouldn`t be configured. Below is the iperf result comparison between HW descriptor prefetch disabled(DCHE=0b) and enabled(DCHE=1b). Tested on Intel Elkhartlake platform with DWMAC Core 5.20. Observed line rate performance improvement with HW descriptor prefetch enabled. DCHE = 0b [ 5] local 169.254.1.162 port 42123 connected to 169.254.244.142 port 5201 [ ID] Interval Transfer Bitrate Total Datagrams [ 5] 0.00-1.00 sec 96.7 MBytes 811 Mbits/sec 70050 [ 5] 1.00-2.00 sec 96.5 MBytes 809 Mbits/sec 69850 [ 5] 2.00-3.00 sec 96.3 MBytes 808 Mbits/sec 69720 [ 5] 3.00-4.00 sec 95.9 MBytes 804 Mbits/sec 69450 [ 5] 4.00-5.00 sec 96.0 MBytes 806 Mbits/sec 69530 [ 5] 5.00-6.00 sec 96.8 MBytes 812 Mbits/sec 70080 [ 5] 6.00-7.00 sec 96.9 MBytes 813 Mbits/sec 70140 [ 5] 7.00-8.00 sec 96.8 MBytes 812 Mbits/sec 70080 [ 5] 8.00-9.00 sec 97.0 MBytes 814 Mbits/sec 70230 [ 5] 9.00-10.00 sec 96.9 MBytes 813 Mbits/sec 70170 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-10.00 sec 966 MBytes 810 Mbits/sec 0.000 ms 0/699300 (0%) sender [ 5] 0.00-10.00 sec 966 MBytes 810 Mbits/sec 0.011 ms 0/699265 (0%) receiver DCHE = 1b [ 5] local 169.254.1.162 port 49740 connected to 169.254.244.142 port 5201 [ ID] Interval Transfer Bitrate Total Datagrams [ 5] 0.00-1.00 sec 97.9 MBytes 821 Mbits/sec 70880 [ 5] 1.00-2.00 sec 98.1 MBytes 823 Mbits/sec 71060 [ 5] 2.00-3.00 sec 98.2 MBytes 824 Mbits/sec 71140 [ 5] 3.00-4.00 sec 98.2 MBytes 824 Mbits/sec 71090 [ 5] 4.00-5.00 sec 98.1 MBytes 823 Mbits/sec 71050 [ 5] 5.00-6.00 sec 98.1 MBytes 823 Mbits/sec 71040 [ 5] 6.00-7.00 sec 98.1 MBytes 823 Mbits/sec 71050 [ 5] 7.00-8.00 sec 98.2 MBytes 824 Mbits/sec 71140 [ 5] 8.00-9.00 sec 98.2 MBytes 824 Mbits/sec 71120 [ 5] 9.00-10.00 sec 98.3 MBytes 824 Mbits/sec 71150 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-10.00 sec 981 MBytes 823 Mbits/sec 0.000 ms 0/710720 (0%) sender [ 5] 0.00-10.00 sec 981 MBytes 823 Mbits/sec 0.041 ms 0/710650 (0%) receiver Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22net: stmmac: Add HW descriptor prefetch setting for DWMAC Core 5.20 onwardsMohammad Athari Bin Ismail
DWMAC Core 5.20 onwards supports HW descriptor prefetching. Additionally, it also depends on platform specific RTL configuration. This capability could be enabled by setting DMA_Mode bit-19 (DCHE). So, to enable this cability, platform must set plat->dma_cfg->dche = true and the DWMAC core version must be 5.20 onwards. Else, this capability wouldn`t be configured Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22net/mlx4: Treat VFs fair when handling comm_channel_eventsHans Westgaard Ry
Handling comm_channel_event in mlx4_master_comm_channel uses a double loop to determine which slaves have requested work. The search is always started at lowest slave. This leads to unfairness; lower VFs tends to be prioritized over higher VFs. The patch uses find_next_bit to determine which slaves to handle. Fairness is implemented by always starting at the next to the last start. An MPI program has been used to measure improvements. It runs 500 ibv_reg_mr, synchronizes with all other instances and then runs 500 ibv_dereg_mr. The results running 500 processes, time reported is for running 500 calls: ibv_reg_mr: Mod. Org. mlx4_1 403.356ms 424.674ms mlx4_2 403.355ms 424.674ms mlx4_3 403.354ms 424.674ms mlx4_4 403.355ms 424.674ms mlx4_5 403.357ms 424.677ms mlx4_6 403.354ms 424.676ms mlx4_7 403.357ms 424.675ms mlx4_8 403.355ms 424.675ms ibv_dereg_mr: Mod. Org. mlx4_1 116.408ms 142.818ms mlx4_2 116.434ms 142.793ms mlx4_3 116.488ms 143.247ms mlx4_4 116.679ms 143.230ms mlx4_5 112.017ms 107.204ms mlx4_6 112.032ms 107.516ms mlx4_7 112.083ms 184.195ms mlx4_8 115.089ms 190.618ms Suggested-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22bnxt_en: fix ternary sign extension bug in bnxt_show_temp()Dan Carpenter
The problem is that bnxt_show_temp() returns long but "rc" is an int and "len" is a u32. With ternary operations the type promotion is quite tricky. The negative "rc" is first promoted to u32 and then to long so it ends up being a high positive value instead of a a negative as we intended. Fix this by removing the ternary. Fixes: d69753fa1ecb ("bnxt_en: return proper error codes in bnxt_show_temp") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22thermal/drivers/mtk_thermal: Remove redundant initializations of several ↵Colin Ian King
variables Several variables are being initialized with values that is never read and being updated later with a new value. The initializations are redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422120412.246291-1-colin.king@canonical.com
2021-04-22thermal/core/power allocator: Use the lockless __thermal_cdev_update() functionLukasz Luba
Use the new helper function and avoid unnecessery second lock/unlock, which was present in old approach with thermal_cdev_update(). Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422153624.6074-4-lukasz.luba@arm.com
2021-04-22thermal/core/fair share: Use the lockless __thermal_cdev_update() functionLukasz Luba
Use the new helper function and avoid unnecessery second lock/unlock, which was present in old approach with thermal_cdev_update(). Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422153624.6074-3-lukasz.luba@arm.com
generated by cgit (git 2.34.1) at 2025-09-14 17:25:40 +0000