summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-02-19drm/nouveau: use post-decrement in error handlingRasmus Villemoes
We need to use post-decrement to get the dma_map_page undone also for i==0, and to avoid some very unpleasant behaviour if dma_map_page failed already at i==0. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-19drm/atomic: Allow for holes in connector state, v2.Maarten Lankhorst
Because we record connector_mask using 1 << drm_connector_index now the connector_mask should stay the same even when other connectors are removed. This was not the case with MST, in that case when removing a connector all other connectors may change their index. This is fixed by waiting until the first get_connector_state to allocate connector_state, and force reallocation when state is too small. As a side effect connector arrays no longer have to be preallocated, and can be allocated on first use which means a less allocations in the page flip only path. Changes since v1: - Whitespace. (Ville) - Call ida_remove when destroying the connector. (Ville) - u32 alloc -> int. (Ville) Fixes: 14de6c44d149 ("drm/atomic: Remove drm_atomic_connectors_for_crtc.") Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-18hwmon: (ads1015) Handle negative conversion values correctlyPeter Rosin
Make the divisor signed as DIV_ROUND_CLOSEST is undefined for negative dividends when the divisor is unsigned. Signed-off-by: Peter Rosin <peda@axentia.se> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-02-18clk: gpio: Really allow an optional clock= DT propertyStephen Boyd
We mis-merged the original patch from Russell here and so the patch went almost all the way, except that we still failed to probe when there wasn't a clocks property in the DT node. Allow that case by making a negative value from of_clk_get_parent_count() into "no parents", like the original patch did. Fixes: 7ed88aa2efa5 ("clk: fix clk-gpio.c with optional clock= DT property") Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-19Merge tag 'drm-vc4-fixes-2016-02-17' of github.com:anholt/linux into drm-fixesDave Airlie
This pull request fixes GPU reset (which was disabled shortly after V3D integration due to build breakage) and waits for idle in the presence of signals (which X likes to do a lot). * tag 'drm-vc4-fixes-2016-02-17' of github.com:anholt/linux: drm/vc4: Use runtime PM to power cycle the device when the GPU hangs. drm/vc4: Enable runtime PM. drm/vc4: Fix spurious GPU resets due to BO reuse. drm/vc4: Drop error message on seqno wait timeouts. drm/vc4: Fix -ERESTARTSYS error return from BO waits. drm/vc4: Return an ERR_PTR from BO creation instead of NULL. drm/vc4: Fix the clear color for the first tile rendered. drm/vc4: Validate that WAIT_BO padding is cleared.
2016-02-19Merge branch 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Just two small fixes in the ttm_tt_populate error handling; one for radeon, one for amdgpu. * 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: use post-decrement in error handling drm/amdgpu: use post-decrement in error handling
2016-02-19Merge tag 'drm-intel-fixes-2016-02-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes single g4x hpd fix. * tag 'drm-intel-fixes-2016-02-18' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fix hpd live status bits for g4x
2016-02-18Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two simple fixes. One prevents a soft lockup on some target removal scenarios and the other prevents us trying to probe the marvell console device, which causes it to time out and need the bus resetting" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: fix soft lockup in scsi_remove_target() on module removal SCSI: Add Marvell configuration device to VPD blacklist
2016-02-18USB: cdc_subset: only build when one driver is enabledArnd Bergmann
This avoids a harmless randconfig warning I get when USB_NET_CDC_SUBSET is enabled, but all of the more specific drivers are not: drivers/net/usb/cdc_subset.c:241:2: #warning You need to configure some hardware for this driver The current behavior is clearly intentional, giving a warning when a user picks a configuration that won't do anything good. The only reason for even addressing this is that I'm getting close to eliminating all 'randconfig' warnings on ARM, and this came up a couple of times. My workaround is to not even build the module when none of the configurations are enable. Alternatively we could simply remove the #warning (nothing wrong for compile-testing), turn it into a runtime warning, or change the Kconfig options into a menu to hide CONFIG_USB_NET_CDC_SUBSET. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18vxlan: do not use fdb in metadata modeJiri Benc
In metadata mode, the vxlan interface is not supposed to use the fdb control plane but an external one (openvswitch or static routes). With the current code, packets may leak into the fdb handling code which usually causes them to be dropped anyway but may have strange side effects. Just drop the packets directly when in metadata mode if the destination data are not correctly provided on egress. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18mISDN: prevent possible NULL pointer dereferenceAnton Protopopov
A return value of the bchannel_get_rxbuf() function is compared with the positive ENOMEM value instead of the negative -ENOMEM value to detect a memory allocation problem. Thus, after a possible memory allocation failure the bc->bch.rx_skb will be NULL which will lead to a NULL pointer dereference. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18lance: Return correct error codeAmitoj Kaur Chawla
Failure of kzalloc should cause the enclosing function to return -ENOMEM, not -ENODEV. Additionally, removed the following checkpatch warnings: ERROR: spaces required around that '==' (ctx:VxV) ERROR: space required before the open parenthesis '(' CHECK: Comparison to NULL could be written "!lp" Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18geneve: clear IFF_TX_SKB_SHARINGJiri Benc
ether_setup sets IFF_TX_SKB_SHARING but this is not supported by geneve as it modifies the skb on xmit. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18vxlan: clear IFF_TX_SKB_SHARINGJiri Benc
ether_setup sets IFF_TX_SKB_SHARING but this is not supported by vxlan as it modifies the skb on xmit. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18geneve: Refine MTU limitDavid Wragg
Calculate the maximum MTU taking into account the size of headers involved in GENEVE encapsulation, as for other tunnel types. Changes in v3: - Correct comment style Changes in v2: - Conform more closely to ip_tunnel_change_mtu - Exclude GENEVE options from max MTU calculation Signed-off-by: David Wragg <david@weave.works> Acked-by: Jesse Gross <jesse@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18mlxsw: spectrum: Allow for PVID deletionIdo Schimmel
When PVID is toggled off on a port member in a VLAN filtering bridge or the PVID VLAN is deleted, make the port drop untagged packets. Reverse the operation when PVID is toggled back on. Set the PVID back to the default (1), when leaving the bridge so that untagged traffic will be directed to the CPU. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18mlxsw: reg: Add the Switch Port Acceptable Frame Types registerIdo Schimmel
When VLAN filtering is enabled on a bridge and PVID is deleted from a bridge port, then untagged frames are not allowed to ingress into the bridge from this port. Add the Switch Port Acceptable Frame Types (SPAFT) register, which configures the frame admittance of the port. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18i2c: i801: Adding Intel Lewisburg support for iTCOAlexandra Yates
Starting from Intel Sunrisepoint (Skylake PCH) the iTCO watchdog resources have been moved to reside under the i801 SMBus host controller whereas previously they were under the LPC device. This patch adds Intel lewisburg SMBus support for iTCO device. It allows to load watchdog dynamically when the hardware is present. Fixes: cdc5a3110e7c ("i2c: i801: add Intel Lewisburg device IDs") Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2016-02-18USB: option: add "4G LTE usb-modem U901"Bjørn Mork
Thomas reports: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=6001 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Cc: <stable@vger.kernel.org> Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-18USB: cp210x: add IDs for GE B650V3 and B850V3 boardsKen Lin
Add USB ID for cp2104/5 devices on GE B650v3 and B850v3 boards. Signed-off-by: Ken Lin <ken.lin@advantech.com.tw> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-18USB: option: add support for SIM7100EAndrey Skvortsov
$ lsusb: Bus 001 Device 101: ID 1e0e:9001 Qualcomm / Option $ usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=101 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 2 P: Vendor=1e0e ProdID=9001 Rev= 2.32 S: Manufacturer=SimTech, Incorporated S: Product=SimTech, Incorporated S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) The last interface (6) is used for Android Composite ADB interface. Serial port layout: 0: QCDM/DIAG 1: NMEA 2: AT 3: AT/PPP 4: audio Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-17et131x: check return value of dma_alloc_coherentInsu Yun
For error handling, dma_alloc_coherent's return value needs to be checked, not argument. Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net: thunderx: Fix receive packet statsSunil Goutham
Counting rx packets for every CQE_RX in CQ irq handler is incorrect. Synchronization is missing when multiple queues are receiving packets simultaneously. Like transmit packet stats use HW stats here. Also removed unused 'cqe_type' parameter in nicvf_rcv_pkt_handler(). Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net: thunderx: Fix for HW TSO not enabled for secondary qsetsSunil Goutham
For secondary Qsets 'hw_tso' is not getting set as probe() returns much earlier. Fixed it by moving silicon revision check. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net: thunderx: Fix for multiqset not configured upon interface toggleSunil Goutham
When a interface is assigned morethan 8 queues and the logical interface is toggled i.e down & up, additional queues or qsets are not initialized as secondary qset count is being set to zero while tearing down. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17Revert "PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed"Bjorn Helgaas
Revert 811a4e6fce09 ("PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed"). This is part of reverting 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") to fix regressions it introduced. Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211 Fixes: 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> CC: Jiang Liu <jiang.liu@linux.intel.com>
2016-02-17phy: marvell: Fix and unify reg-init behaviorClemens Gruber
For the Marvell 88E1510, marvell_of_reg_init was called too late, in the config_aneg function. Since commit 113c74d83eef ("net: phy: turn carrier off on phy attach"), this lead to the link not coming up at boot anymore, due to the phy state machine being stuck at waiting for interrupts (off by default on the 88E1510). For seven other Marvell PHYs, marvell_of_reg_init was not called at all. Add a generic marvell_config_init function, which in turn calls marvell_of_reg_init. PHYs, which already have a specific config_init function with a call to marvell_of_reg_init, are left untouched. The generic marvell_config_init function is called for all the others, to get consistent behavior across all Marvell PHYs. Fixes: 113c74d83eef ("net: phy: turn carrier off on phy attach") Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17pppoe: fix reference counting in PPPoE proxyGuillaume Nault
Drop reference on the relay_po socket when __pppoe_xmit() succeeds. This is already handled correctly in the error path. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17mlxsw: spectrum: Set STP state when leaving 802.1D bridgeIdo Schimmel
When a VLAN device leaves a bridge its STP state is set to DISABLED, which causes the hardware to discard any packets coming through the port with this VLAN. Fix that by setting STP state to FORWARDING when the device leaves its bridge and allow traffic to be directed to CPU. Fixes: 26f0e7fb15de ("mlxsw: spectrum: Add support for VLAN devices bridging") Reported-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17mlxsw: Treat local port 64 as validIdo Schimmel
MLXSW_PORT_MAX_PORTS represents the maximum number of local ports, which is 65 for both ASICs (SwitchX-2 and Spectrum) supported by this driver. Fixes: 93c1edb27f9e ("mlxsw: Introduce Mellanox switch driver core") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A collection of fixes from the past few weeks that should go into 4.5. This contains: - Overflow fix for sysfs discard show function from Alan. - A stacking limit init fix for max_dev_sectors, so we don't end up artificially capping some use cases. From Keith. - Have blk-mq proper end unstarted requests on a dying queue, instead of pushing that to the driver. From Keith. - NVMe: - Update to Kconfig description for NVME_SCSI, since it was vague and having it on is important for some SUSE distros. From Christoph. - Set of fixes from Keith, around surprise removal. Also kills the no-merge flag, so it supports merging. - Set of fixes for lightnvm from Matias, Javier, and Wenwei. - Fix null_blk oops when asked for lightnvm, but not available. From Matias. - Copy-to-user EINTR fix from Hannes, fixing a case where SG_IO fails if interrupted by a signal. - Two floppy fixes from Jiri, fixing signal handling and blocking open. - A use-after-free fix for O_DIRECT, from Mike Krinkin. - A block module ref count fix from Roman Pen. - An fs IO wait accounting fix for O_DSYNC from Stephane Gasparini. - Smaller reallo fix for xen-blkfront from Bob Liu. - Removal of an unused struct member in the deadline IO scheduler, from Tahsin. - Also from Tahsin, properly initialize inode struct members associated with cgroup writeback, if enabled. - From Tejun, ensure that we keep the superblock pinned during cgroup writeback" * 'for-linus' of git://git.kernel.dk/linux-block: (25 commits) blk: fix overflow in queue_discard_max_hw_show writeback: initialize inode members that track writeback history writeback: keep superblock pinned during cgroup writeback association switches bio: return EINTR if copying to user space got interrupted NVMe: Rate limit nvme IO warnings NVMe: Poll device while still active during remove NVMe: Requeue requests on suspended queues NVMe: Allow request merges NVMe: Fix io incapable return values blk-mq: End unstarted requests on dying queue block: Initialize max_dev_sectors to 0 null_blk: oops when initializing without lightnvm block: fix module reference leak on put_disk() call for cgroups throttle nvme: fix Kconfig description for BLK_DEV_NVME_SCSI kernel/fs: fix I/O wait not accounted for RW O_DSYNC floppy: refactor open() flags handling lightnvm: allow to force mm initialization lightnvm: check overflow and correct mlc pairs lightnvm: fix request intersection locking in rrpc lightnvm: warn if irqs are disabled in lock laddr ...
2016-02-17Merge tag 'devicetree-fixes-for-4.5-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - Fix irq msi-map calculation for nonzero rid-base. - Binding doc updates for GICv3, fsl-imx-uart, and S3C RTC. * tag 'devicetree-fixes-for-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: rtc: s3c: Document required clocks in the DT binding serial: fsl-imx-uart: Fix typo in fsl,dte-mode description dt-bindings: arm, gic-v3: require that reserved cells are always 0 of/irq: Fix msi-map calculation for nonzero rid-base
2016-02-17irqchip/gicv3-its: Avoid cache flush beyond ITS_BASERn memory sizeShanker Donthineni
Function its_alloc_tables() maintains two local variables, "order" and and "alloc_size", to hold memory size that has been allocated to ITS_BASEn. We don't always refresh the variable alloc_size whenever value of the variable order changes, causing the following two problems. - Cache flush operation with size more than required. - Information reported by pr_info is not correct. Use a helper macro that converts page order to size in bytes instead of variable "alloc_size" to fix both the problems. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-17drivers: net: cpsw-phy-sel: add dev_warn() for unsupported PHY modeDavid Rivshin
The cpsw-phy-sel driver supports only MII, RMII, and RGMII PHY modes, and silently handled any other values as if MII was specified. In a case where the PHY mode was incorrectly specified, or a bug elsewhere, there would be no indication of a problem. If MII was the correct mode, then this will go unnoticed, otherwise the symptom will be a failure to transmit/receive data over the RMII/RGMII link. Add a dev_warn() to make this condition obvious and provide a breadcrumb to follow. Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David Rivshin <drivshin@allworx.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17phy: keep pause flags in phy driver featuresWoojung.Huh@microchip.com
genphy_config_init() masked out pause flags set in phy driver structure. Pause flags needs to be preserved in phydev->supported & phydev->advertising. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net/mlx4_en: Avoid changing dev->features directly in run-timeEugenia Emantayev
It's forbidden to manually change dev->features in run-time. Currently, this is done in the driver to make sure that GSO_UDP_TUNNEL is advertized only when VXLAN tunnel is set. However, since the stack actually does features intersection with hw_enc_features, we can safely revert to advertizing features early when registering the netdevice. Fixes: f4a1edd56120 ('net/mlx4_en: Advertize encapsulation offloads [...]') Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net/mlx4_core: Set UAR page size to 4KB regardless of system page sizeHuy Nguyen
problem description: The current code sets UAR page size equal to system page size. The ConnectX-3 and ConnectX-3 Pro HWs require minimum 128 UAR pages. The mlx4 kernel drivers are not loaded if there is less than 128 UAR pages. solution: Always set UAR page to 4KB. This allows more UAR pages if the OS has PAGE_SIZE larger than 4KB. For example, PowerPC kernel use 64KB system page size, with 4MB uar region, there are 4MB/2/64KB = 32 uars (half for uar, half for blueflame). This does not meet minimum 128 UAR pages requirement. With 4KB UAR page, there are 4MB/2/4KB = 512 uars which meet the minimum requirement. Note that only codes in mlx4_core that deal with firmware know that uar page size is 4KB. Codes that deal with usr page in cq and qp context (mlx4_ib, mlx4_en and part of mlx4_core) still have the same assumption that uar page size equals to system page size. Note that with this implementation, on 64KB system page size kernel, there are 16 uars per system page but only one uars is used. The other 15 uars are ignored because of the above assumption. Regarding SR-IOV, mlx4_core in hypervisor will set the uar page size to 4KB and mlx4_core code in virtual OS will obtain the uar page size from firmware. Regarding backward compatibility in SR-IOV, if hypervisor has this new code, the virtual OS must be updated. If hypervisor has old code, and the virtual OS has this new code, the new code will be backward compatible with the old code. If the uar size is big enough, this new code in VF continues to work with 64 KB uar page size (on PowerPc kernel). If the uar size does not meet 128 uars requirement, this new code not loaded in VF and print the same error message as the old code in Hypervisor. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net/mlx4_core: Do not BUG_ON during reset when PCI is offlineDaniel Jurgens
The PCI channel could go offline during reset due to EEH. Don't bug on in this case, the error is recoverable. Fixes: f6bc11e42646 ('net/mlx4_core: Enhance the catas flow to support device reset') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net/mlx4_core: Fix potential corruption in counters databaseEran Ben Elisha
The error flow in procedure handle_existing_counter() is wrong. The procedure should exit after encountering the error, not continue as if everything is OK. Fixes: 68230242cdbc ('net/mlx4_core: Add port attribute when tracking counters') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net/mlx4_en: Choose time-stamping shift value according to HW frequencyEugenia Emantayev
Previously, the shift value used for time-stamping was constant and didn't depend on the HW chip frequency. Change that to take the frequency into account and calculate the maximal value in cycles per wraparound of ten seconds. This time slot was chosen since it gives a good accuracy in time synchronization. Algorithm for shift value calculation: * Round up the maximal value in cycles to nearest power of two * Calculate maximal multiplier by division of all 64 bits set to above result * Then, invert the function clocksource_khz2mult() to get the shift from maximal mult value Fixes: ec693d47010e ('net/mlx4_en: Add HW timestamping (TS) support') Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net/mlx4_en: Count HW buffer overrun only onceAmir Vadai
RdropOvflw counts overrun of HW buffer, therefore should be used for rx_fifo_errors only. Currently RdropOvflw counter is mistakenly also set into rx_missed_errors and rx_over_errors too, which makes the device total dropped packets accounting to show wrong results. Fix that. Use it for rx_fifo_errors only. Fixes: c27a02cd94d6 ('mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC') Signed-off-by: Amir Vadai <amir@vadai.me> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17IB/mlx4: Add support for the port info class for RoCE portsEran Ben Elisha
Report that driver supports IB_PMA_CLASS_CAP_EXT_WIDTH in respond for IB_MGMT_CLASS_PERF_MGMT mad with IB_PMA_CLASS_PORT_INFO attr id. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-17IB/mlx4: Add support for extended counters over RoCE portsEran Ben Elisha
When attribute IB_PMA_PORT_COUNTERS_EXT is set, we now return 64 bit values for the counters. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-17RDMA/ocrdma: Fix arm logic to align with new cq APIDevesh Sharma
Today ocrdma driver defer arming the CQ till poll is called. This was used to prevent calling poll-cq on an armed CQ. Recently a set of new CQ API has been introduced into the linux kernel. The implementation of this API guarantees that a given CQ is never armed before calling poll on it. Most of the kernel ULPs have already moved to use this new API or have a code where poll is called before arming the CQ. Thus, the above workaround in ocrdma is not needed anymore. This patch removes the additional logic to deffer arm till poll is called. This patch adds a simple scheme where ib_req_notify_cq() will actually arm the cq. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-17usb: musb: Fix DMA desired mode for Mentor DMA engineCristian Birsan
Commit 754fe4a92c07 ("usb: musb: Remove ifdefs for TX DMA for musb_host.c") introduces a problem setting the desired channel mode for the Mentor DMA engine. There is a case where an address is incorrectly assigned to the DMA channel desired mode when it should instead be assigned the actual mode value. This results in the value of channel->desired_mode not being correct. Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-17usb: gadget: fsl_qe_udc: fix IS_ERR_VALUE usageAndrzej Hajda
IS_ERR_VALUE macro should be used only with unsigned long type. Otherwise it can work incorrectly. The patch follows conclusion from discussion on LKML [1][2]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2120927 [2]: http://permalink.gmane.org/gmane.linux.kernel/2150581 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-17drm/i915: Fix hpd live status bits for g4xVille Syrjälä
Looks like g4x hpd live status bits actually agree with the spec. At least they do on the machine I have, and apparently on Nick Bowler's g4x as well. So gm45 may be the only platform where they don't agree. At least that seems to be the case based on the (somewhat incomplete) logs/dumps in [1], and Daniel has also tested this on his gm45 sometime in the past. So let's change the bits to match the spec on g4x. That actually makes the g4x bits identical to vlv/chv so we can just share the code between those platforms, leaving gm45 as the special case. [1] https://bugzilla.kernel.org/show_bug.cgi?id=52361 Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Sonika Jindal <sonika.jindal@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Nick Bowler <nbowler@draconx.ca> References: https://lists.freedesktop.org/archives/dri-devel/2016-February/100382.html Reported-by: Nick Bowler <nbowler@draconx.ca> Cc: stable@vger.kernel.org Fixes: 237ed86c693d ("drm/i915: Check live status before reading edid") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455127145-20087-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 0780cd36c7af70c55981ee624084f0f48cae9b95) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-02-17hpet: Drop stale URLsMichael S. Tsirkin
Looks like the HPET spec at intel.com got moved. It isn't hard to find so drop the link, just mention the revision assumed. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1455145462-3877-1-git-send-email-mst@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-17usb: dwc2: USB_DWC2 should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: ERROR: "usb_gadget_map_request" [drivers/usb/dwc2/dwc2.ko] undefined! ERROR: "usb_gadget_unmap_request" [drivers/usb/dwc2/dwc2.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/dwc2/dwc2.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-17usb: dwc2: host: fix the data toggle error in full speed descriptor dmaTang, Jianqiang
There will be data toggle error happen for full speed buld-out transfer. The data toggle bit is saved in qh for non-control transfers, it is wrong to check the qtd for that case. Also fix one static analysis tool issue after fix the data toggle error. John Youn: * Added WARN() to warn on improper usage of the dwc2_hcd_save_data_toggle() function. Signed-off-by: Dyson Lee <dyson.lee@intel.com> Signed-off-by: Tang, Jianqiang <jianqiang.tang@intel.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 11:56:51 +0000