| Age | Commit message (Collapse) | Author |
|---|
|
'regulator/fix/mt6311' into regulator-linus
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into late/tegra
ARM: tegra: Core SoC changes for v4.5-rc1
The big thing here is Tegra210 support, which is really only the Kconfig
symbol. Other than that there's a few miscellaneous fixes.
* tag 'tegra-for-4.5-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: select USB_ULPI from EHCI rather than platform
ARM: tegra: Ensure entire dcache is flushed on entering LP0/1
amba: Hide TEGRA_AHB symbol
soc/tegra: Add Tegra210 support
soc/tegra: Provide per-SoC Kconfig symbols
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The offset inside the fragment was not used for the dma address and
silent data corruption resulted because TSO makes the checksum match.
Fixes: 077742dac2c7 ("dwc_eth_qos: Add support for Synopsys DWC Ethernet QoS")
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It used to be that bus->irq was a pointer but after e7f4dc3536a4
('mdio: Move allocation of interrupts into core') it's an array inside
the mdio struct, so it can never be NULL. Let's remove the check.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It used to be that mdio->irq was a pointer but after e7f4dc3536a4
('mdio: Move allocation of interrupts into core') it's an array inside
the mdio struct so it can never be NULL.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If bus = kzalloc() fails then we end up dereferencing bus when we do
"bus->irq[i] = PHY_POLL;". The code is a little simpler if we reverse
the NULL check and return directly on failure.
Fixes: e7f4dc3536a4 ('mdio: Move allocation of interrupts into core')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that a device can be managed using the system blocks, a method to
reset the device is necessary as well. This patch introduces logic to
reset the device easily to factory state and exposes it through an
ioctl.
The ioctl takes the following flags:
NVM_FACTORY_ERASE_ONLY_USER
By default all blocks, except host-reserved blocks are erased upon
factory reset. Instead of this, only erase host-reserved blocks.
NVM_FACTORY_RESET_HOST_BLKS
Mark host-reserved blocks to be erased and set their type to free.
NVM_FACTORY_RESET_GRWN_BBLKS
Mark "grown bad blocks" to be erased and set their type to free.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Use system block information to register the appropriate media manager.
This enables the LightNVM subsystem to instantiate a media manager
selected by the user, instead of relying on automatic detection by each
media manager loaded in the kernel.
A device must now be initialized before it can proceed to initialize its
media manager. Upon initialization, the configured media manager is
automatically initialized as well.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Based on the previous patch, we now introduce an ioctl to initialize the
device using nvm_init_sysblock and create the necessary system blocks.
The user may specify the media manager that they wish to instantiate on
top. Default from user-space will be "gennvm".
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
An Open-Channel SSD shall be initialized before use. To initialize, we
define an on-disk format, that keeps a small set of metadata to bring up
the media manager on top of the device.
The initial step is introduced to allow a user to format the disks for a
given media manager. During format, a system block is stored on one to
three separate luns on the device. Each lun has the system block
duplicated. During initialization, the system block can be retrieved and
the appropriate media manager can initialized.
The on-disk format currently covers (struct nvm_system_block):
- Magic value "NVMS".
- Monotonic increasing sequence number.
- The physical block erase count.
- Version of the system block format.
- Media manager type.
- Media manager superblock physical address.
The interface provides three functions to manage the system block:
int nvm_init_sysblock(struct nvm_dev *, struct nvm_sb_info *)
int nvm_get_sysblock(struct nvm *dev, struct nvm_sb_info *)
int nvm_update_sysblock(struct nvm *dev, struct nvm_sb_info *)
Each implement a part of the logic to manage the system block. The
initialization creates the first system blocks and mark them on the
device. Get retrieves the latest system block by scanning all pages in
the associated system blocks. The update sysblock writes new metadata
and allocates new block if necessary.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
NAND MLC memories have both lower and upper pages. When programming,
both of these must be written, before data can be read. However,
these lower and upper pages might not placed at even and odd flash
pages, but can be skipped. Therefore each flash memory has its lower
pages defined, which can then be used when programming and to know when
padding are necessary.
This patch implements the lower page definition in the specification,
and exposes it through a simple lookup table at dev->lptbl.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Some flash media has extended capabilities, such as programming SLC
pages on MLC/TLC flash, erase/program suspend, scramble and encryption.
MCCAP is introduced to detect support for these capabilities in the
command set.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
LightNVM targets need to know the state of the flash block when doing
flash optimizations. An example is implementing a write buffer to
respect the flash page size. Currently, block state is not accounted
for; the media manager only differentiates among free, bad and in-use
blocks.
This patch adds the logic in the generic media manager to enable
targets manage blocks into open and close separately, and it implements
such management in rrpc. It also adds a set of flags to describe the
state of the block (open, closed, free, bad).
In order to avoid taking two locks (nvm_lun and rrpc_lun) consecutively,
we introduce lockless get_/put_block primitives so that the open and
close list locks and future common logic is handled within the nvm_lun
lock.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Currently, a rrpc block only points to its nvm_lun. If a user wants to
find the associated rrpc lun, it will have to calculate the index and
look it up manually. By referencing the rrpc lun directly, this step can
be omitted, at the cost of a larger memory footprint.
This is important for upcoming patches that implement write buffering in
rrpc.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Internal logic for both core and media managers, does not have a
backing bio for issuing I/Os. Introduce nvm_submit_ppa to allow raw
I/Os to be submitted to the underlying device driver.
The function request the device, ppa, data buffer and its length and
will submit the I/O synchronously to the device. The return value may
therefore be used to detect any errors regarding the issued I/O.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Instead of passing request error into the LightNVM modules, incorporate
it into the nvm_rq.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Sometimes a user want to erase multiple PPAs at the same time. Extend
nvm_erase_ppa to take multiple ppas and number of ppas to be erased.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
There is no need to check whether dev's pages per block is
beyond rrpc support every time we init a lun, we only need
to check it once before enter the lun init loop.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The Westlake controller requires that the PPA list has sectors defined
sequentially. Currently, the PPA list is created with planes first, then
sectors. Change this to sectors first, then planes.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This patch fix two issues in rrpc_lun_gc
1. prio_list is protected by rrpc_lun's lock not nvm_lun's, so
acquire rlun's lock instead of lun's before operate on the list.
2. we delete block from prio_list before allocating gcb, but gcb
allocation may fail, we end without putting it back to the list,
this makes the block won't get reclaimed in the future. To solve
this issue, delete block after gcb allocation.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
We delete a block from the gc list before reclaim it, so
put it back to the list on its reclaim fail, otherwise
this block will not get reclaimed and be programmable
in the future.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
We should check last io completion status before
starting another one.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
During get_bb_tbl, a callback is used to allow an user-specific scan
function to be called. The callback may return an error, and in that
case, the return value is overridden. However, the callback error is
needed when the fault is a user error and not a kernel error. For
example, when a user tries to initialize the same device twice. The
get_bb_tbl callback should be able to communicate this.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
To implement sync I/O support within the LightNVM core, the end_io
functions are refactored to take an end_io function pointer instead of
testing for initialized media manager, followed by calling its end_io
function.
Sync I/O can then be implemented using a callback that signal I/O
completion. This is similar to the logic found in blk_to_execute_io().
By implementing it this way, the underlying device I/Os submission logic
is abstracted away from core, targets, and media managers.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
A device may be driven in single, double or quad plane mode. In that
case, the rqd must have either one, two, or four PPAs set for a single
PPA sent to the device. Refactor this logic into their own
functions to be shared by program/erase/read in the core.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
A device may function in single, dual or quad plane mode. The gennvm
media manager manages this with explicit helpers. They convert a single
ppa to 1, 2 or 4 separate ppas in a ppa list. To aid implementation of
recovery and system blocks, this functionality can be moved directly
into the core.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
When rrpc_write_ppalist_rq and rrpc_read_ppalist_rq succeed, we setup
rq correctly, but nvm_submit_io may afterward fail since it cannot
allocate request or nvme_nvm_command, we return error but forget to
cleanup the previous work.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The mempool allocation might fail. Make sure to return error when it
does, instead of causing a kernel panic.
Signed-off-by: Javier Gonzalez <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
When initing bad block list in gennvm_block_bb, once we move bad block
from free_list to bb_list, we should maintain both stat info
nr_free_blocks and nr_bad_blocks. So this patch fixes to add missing
operation related to nr_free_blocks.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Put bio when submission fails, since we get it
before submission. And return error when backend
device driver doesn't provide a submit_io method,
thus we can end IO properly.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This patch fixes a kernel panic issue which happened
when drm driver is closed while modetest.
This issue could be reproduced easily by launching modetest
with page flip repeatedly.
The reason is that invalid drm_file object could be accessed by
send_vblank_event function when finishing page flip if the drm_file
object was removed by drm_release and there was a pended page
flip event which was already committed to hardware.
So this patch makes the pended page flip event to be cancelled by
preclose callback which is called at front of drm_release function.
Changelog v2:
- free vblank event objects belonging to the request process,
increment event space and decrease pending_update when cancelling
the event
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
|
|
This patch removes exynos_drm_crtc_complete_scanout function call
which makes sure for overlay data to be updated to real hardware
when drm driver is released.
With atomic modeset support, it doesn't need the funtion anymore
because atomic modeset interface makes sure that.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch also moves mixer_vsync_set_update() to newly introduced
mixer_atomic_begin/flush callbacks. This ensures that all mixer planes
will be updated on the same vsync event.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Some CRTC drivers (like Exynos DRM Mixer) can handle blocking register
updates only on per-device level, not per-plane level. This patch changes
exynos_crts atomic_begin/atomic_flush callbacks to handle the entire crtc,
instead of given planes, so driver can handle both cases on their own.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Always use macro instead of hard-coded '2' value in conditions related
to video processor window. Additional checks are not needed, because
video layer is registered only when video processor is available.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Allow the remaining alpha formats now that blending
is properly setup.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Properly configure blending properties of given hardware layer based on
the selected pixel format. Currently only per-pixel-based alpha is possible
when respective pixel format has been selected. Configuration of global,
per-plane alpha value, color key and background color will be added later.
This patch is heavily inspired by earlier work done by Tobias Jakobi
<tjakobi@math.uni-bielefeld.de>.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Previously blending setup was static and most of it was
done in mixer_win_reset().
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
'zpos' plane property is configurable, so adjust hardware layers
priority based on the zpos value. 'zpos' value shifted by one can be
used directly as hw priority value and stored to the registers, because
mixer accepts priority values from 1 to 15 (0 means that layer is
disabled).
This patch also changes the default layer priority to match already
exposed initial zpos values. The initial configuration is now:
[top] video > gfx layer1 > gfx layer0 [bottom].
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch adds all infrastructure to make zpos plane property
configurable from userspace.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch renames zpos entry to index, because in most places it is
used as index for selecting hardware layer/window instead of
configurable layer position. This will later enable to make the zpos
property configurable.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
|
|
Pavel noted that lguest maps the switcher code executable and
read-write. This is a bad idea for any kernel text, but
particularly for text mapped at a fixed address.
Create two vmas, one for the text (PAGE_KERNEL_RX) and another
for the stacks (PAGE_KERNEL). Use VM_NO_GUARD to map them
adjacent (as expected by the rest of the code).
Reported-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
http://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull in fixes from Daniel Lezcano:
- Fix the vt8500 timer leading to a system lock up when dealing with too
small delta (Roman Volkov)
- Select the CLKSRC_MMIO when the fsl_ftm_timer is enabled with COMPILE_TEST
(Daniel Lezcano)
- Prevent to compile timers using the 'iomem' API when the architecture has
not HAS_IOMEM set (Richard Weinberger)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- The most significant set of changes this cycle is the Forward Error
Correction (FEC) support that has been added to the DM verity target.
Google uses DM verity on all Android devices and it is believed that
this FEC support will enable DM verity to recover from storage
failures seen since DM verity was first deployed as part of Android.
- A stable fix for a race in the destruction of DM thin pool's
workqueue
- A stable fix for hung IO if a DM snapshot copy hit an error
- A few small cleanups in DM core and DM persistent data.
- A couple DM thinp range discard improvements (address atomicity of
finding a range and the efficiency of discarding a partially mapped
thin device)
- Add ability to debug DM bufio leaks by recording stack trace when a
buffer is allocated. Upon detected leak the recorded stack is
dumped.
* tag 'dm-4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm snapshot: fix hung bios when copy error occurs
dm thin: bump thin and thin-pool target versions
dm thin: fix race condition when destroying thin pool workqueue
dm space map metadata: remove unused variable in brb_pop()
dm verity: add ignore_zero_blocks feature
dm verity: add support for forward error correction
dm verity: factor out verity_for_bv_block()
dm verity: factor out structures and functions useful to separate object
dm verity: move dm-verity.c to dm-verity-target.c
dm verity: separate function for parsing opt args
dm verity: clean up duplicate hashing code
dm btree: factor out need_insert() helper
dm bufio: use BUG_ON instead of conditional call to BUG
dm bufio: store stacktrace in buffers to help find buffer leaks
dm bufio: return NULL to improve code clarity
dm block manager: cleanup code that prints stacktrace
dm: don't save and restore bi_private
dm thin metadata: make dm_thin_find_mapped_range() atomic
dm thin metadata: speed up discard of partially mapped volumes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"The part of patches for Kernel 4.5. There's nothing really big here:
- driver-specific headers for media devices were moved to separate
directories, in order to make clear what headers belong to the core
kABI and require documentation
- Platform data for media drivers were moved from include/media to
include/linux/platform_data/media
- add a driver for cs3308 8-channel volume control, used on some
high-end capture boards
- lirc.h kAPI header were added at include/uapi/linux
- Driver cleanups, new board additions and improvements"
* tag 'media/v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (204 commits)
[media] rc: sunxi-cir: Initialize the spinlock properly
[media] rtl2832: do not filter out slave TS null packets
[media] rtl2832: print reg number on error case
[media] rtl28xxu: return demod reg page from driver cache
[media] coda: enable MPEG-2 ES decoding
[media] coda: don't start streaming without queued buffers
[media] coda: hook up vidioc_prepare_buf
[media] coda: relax coda_jpeg_check_buffer for trailing bytes
[media] coda: make to_coda_video_device static
[media] s5p-mfc: remove volatile attribute from MFC register addresses
[media] s5p-mfc: merge together s5p_mfc_hw_call and s5p_mfc_hw_call_void
[media] s5p-mfc: use spinlock to protect MFC context
[media] s5p-mfc: remove unnecessary callbacks
[media] s5p-mfc: make queue cleanup code common
[media] s5p-mfc: use one implementation of s5p_mfc_get_new_ctx
[media] s5p-mfc: constify s5p_mfc_codec_ops structures
[media] au8522: Avoid memory leak for device config data
[media] ir-lirc-codec.c: don't leak lirc->drv-rbuf
[media] uvcvideo: small cleanup in uvc_video_clock_update()
[media] uvcvideo: Fix reading the current exposure value of UVC
...
|
|
Conflicts:
drivers/net/bonding/bond_main.c
drivers/net/ethernet/mellanox/mlxsw/spectrum.h
drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
The bond_main.c and mellanox switch conflicts were cases of
overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED subsystem updates from Jacek Anaszewski:
"Besides regular driver updates, we introduce a portion of LED core
improvements, that allow to avoid the need for using work queues in
the LED class drivers, that set brightness in a blocking way.
Affected LED class drivers are being optimized accordingly.
- LED core improvements:
- use EXPORT_SYMBOL_GPL consistently,
- add two new LED_BLINK_ flags,
- rename brightness_set_sync op to brightness_set_blocking,
- add led_set_brightness_nosleep{nopm} functions,
- use set_brightness_work for the blocking op,
- drivers shouldn't enforce SYNC/ASYNC brightness setting,
- turn off the LED and wait for completion on unregistering LED
class device,
- add managed version of led_trigger_register,
- add description of brightness setting API to the LED class doc.
- Remove work queues from drivers: leds-tlc591xx, leds-88pm860x, leds-adp5520,
leds-bd2802, leds-blinkm, leds-lm3533, leds-lm3642, leds-pca9532,
leds-lp3944, leds-lp55xx, leds-lp8788, leds-lp8860, leds-pca955x,
leds-pca963x, leds-wm831x, leds-da903x, leds-da9052, leds-dac124d085,
leds-lt3593, leds-max8997, leds-mc13783, leds-regulator, leds-wm8350,
leds-max77693, leds-aat1290, leds-ktd2692, leds-gpio, leds-pwm,
leds-lm355x, leds-ns2.
- Replace brightness_set op with a new brightness_set_blocking op to
make the drivers compatible with led triggers: leds-ipaq-micro,
leds-powernv.
- Add missing of_node_put: leds-ktd2692, leds-aat1290, leds-max77693.
- Make the driver explicitly non-modular: ledtrig-cpu,
ledtrig-ide-disk, leds-syscon.
- Improvements to leds-bcm6328:
- reuse bcm6328_led_set() instead of copying its functionality,
- swap LED ON and OFF definitions,
- improve blink support,
- simplify duplicated unlock in bcm6328_blink_set,
- add little endian support,
- remove unneded lock when checking initial LED status,
- add HAS_IOMEM dependency,
- code cleaning.
- Improvements to leds-bcm6358:
- use bcm6358_led_set() in order to get rid of the lock,
- merge bcm6358_led_mode and bcm6358_led_set,
- add little endian support,
- remove unneded lock when checking initial LED status,
- add HAS_IOMEM dependency,
- remove unneeded busy status check.
- Call led_pwm_set() in leds-pwm to enforce default LED_OFF.
- Fix duration to be msec instead of jiffies: ledtrig-transient.
- Removing NULL check: leds-powernv.
- Use platform_register/unregister_drivers(): leds-sunfire.
- Fix module license specification: ledtrig-oneshot.
- Fix driver description and make license match the header: leds-pwm.
- Remove checking for state < 1 in flash_strobe_store():
led-class-flash.
- Use led_set_brightness_sync for torch brightness:
v4l2-flash-led-class"
* tag 'leds-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (68 commits)
leds: add HAS_IOMEM dependency to LEDS_BCM6328/LEDS_BCM6358
leds: core: add managed version of led_trigger_register
leds: bcm6358: remove unneeded busy status check
leds: bcm6328: improve blink support
leds: bcm6358: merge bcm6358_led_mode and bcm6358_led_set
leds: bcm6328: simplify duplicated unlock in bcm6328_blink_set
leds: bcm6358: add little endian support
leds: bcm6328: add little endian support
leds: bcm6358: remove unneded lock when checking initial LED status
leds: bcm6358: Use bcm6358_led_set() in order to get rid of the lock
leds: bcm6328: remove unneded lock when checking initial LED
leds: bcm6328: code cleaning
leds: syscon: Make the driver explicitly non-modular
leds: ledtrig-ide-disk: Make the driver explicitly non-modular
leds: ledtrig-cpu: Make the driver explicitly non-modular
leds: sunfire: Use platform_register/unregister_drivers()
leds: max77693: Add missing of_node_put
leds: aat1290: Add missing of_node_put
leds: powernv: Implement brightness_set_blocking op
leds: ipaq-micro: Implement brightness_set_blocking op
...
|
|
Pull EDAC updates from Borislav Petkov:
- hide EDAC workqueue from users (Borislav Petkov)
- edac_subsys init/teardown cleanup (Borislav Petkov)
- make mpc85xx-pci-edac a platform device (Scott Wood)
- sb_edac KNL gen2 support (Jim Snow)
- other small cleanups all over the place
* tag 'edac_for_4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, i5100: Use to_delayed_work()
MAINTAINERS: Fix EDAC repo URLs format
EDAC, sb_edac: Set fixed DIMM width on Xeon Knights Landing
EDAC: Rework workqueue handling
EDAC: Make edac_device workqueue setup/teardown functions static
EDAC: Remove edac_get_sysfs_subsys() error handling
EDAC: Unexport and make edac_subsys static
EDAC: Rip out the edac_subsys reference counting
EDAC: Robustify workqueues destruction
EDAC, mc_sysfs: Fix freeing bus' name
EDAC, mpc85xx: Make mpc85xx-pci-edac a platform device
EDAC, sb_edac: Add Knights Landing (Xeon Phi gen 2) support
EDAC, sb_edac: Add support for duplicate device IDs
EDAC, sb_edac: Virtualize several hard-coded functions
EDAC, mv64x60: Use platform_register/unregister_drivers()
EDAC, mpc85xx: Use platform_register/unregister_drivers()
EDAC: Add DDR4 flag
EDAC: Remove references to bluesmoke.sourceforge.net
EDAC, pci: Remove old disabled code
|
