summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-01-30intel-hid: fix incorrect entries in intel_hid_keymapAlex Hung
intel_hid_keymap contains a duplicate entry for KEY_HOME and an incorrect HID index for KEY_PAGEDOWN Reported-by: Pavel Bludov <pbludov@gmail.com> Signed-off-by: Alex Hung <alex.hung@canonical.com>
2016-01-30dmaengine: IOATDMA: fix timer code that continues to restart channels during ↵Dave Jiang
idle The timer_event() function seems to have a bug where it ends up marking the last entry as non-responding and eventually attempts to restart the channel. This also continuously happen when idle. What needs to happen is for us to make sure there are no descriptors active and then handle that case properly. We should only hit the "cleanup" stage if there are still active descriptors. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-01-30iio: ade7753: avoid uninitialized dataArnd Bergmann
The ade7753_spi_read_reg_16() will either successfully read a value from SPI, or return a failure code without delivering data. However, the ade7753_stop_device() and ade7753_reset() functions use the returned data without checking for an error condition first. Gcc detects this as a possible bug and warns about it: drivers/staging/iio/meter/ade7753.c: In function 'ade7753_remove': drivers/staging/iio/meter/ade7753.c:348:6: error: 'val' may be used uninitialized in this function [-Werror=maybe-uninitialized] val |= BIT(4); /* AD converters can be turned off */ ^ drivers/staging/iio/meter/ade7753.c:345:6: note: 'val' was declared here u16 val; ^ drivers/staging/iio/meter/ade7753.c: In function 'ade7753_probe': drivers/staging/iio/meter/ade7753.c:222:6: error: 'val' may be used uninitialized in this function [-Werror=maybe-uninitialized] In both cases, we can avoids the warning by checking the return code before using the data. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30iio: pressure: mpl115: fix temperature offset signAkinobu Mita
According to the datasheet, the resolusion of temperature sensor is -5.35 counts/C. Temperature ADC is 472 counts at 25C. (https://www.sparkfun.com/datasheets/Sensors/Pressure/MPL115A1.pdf NOTE: This is older revision, but this information is removed from the latest datasheet from nxp somehow) Temp [C] = (Tadc - 472) / -5.35 + 25 = (Tadc - 605.750000) * -0.186915888 So the correct offset is -605.750000. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30iio: imu: Fix dependencies for !HAS_IOMEM archsRichard Weinberger
Not every arch has io memory. While the driver has correct dependencies the select statement will bypass the HAS_IOMEM dependency. So, unbreak the build by rendering it into a real dependency. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30staging: iio: Fix dependencies for !HAS_IOMEM archsRichard Weinberger
Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30iio: adc: Fix dependencies for !HAS_IOMEM archsRichard Weinberger
Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30iio: inkern: fix a NULL dereference on errorDan Carpenter
In twl4030_bci_probe() there are some failure paths where we call iio_channel_release() with a NULL pointer. (Apparently, that driver can opperate without a valid channel pointer). Let's fix it by adding a NULL check in iio_channel_release(). Fixes: 2202e1fc5a29 ('drivers: power: twl4030_charger: fix link problems when building as module') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30crypto: atmel-aes - remove calls of clk_prepare() from atomic contextsCyrille Pitchen
clk_prepare()/clk_unprepare() must not be called within atomic context. This patch calls clk_prepare() once for all from atmel_aes_probe() and clk_unprepare() from atmel_aes_remove(). Then calls of clk_prepare_enable()/clk_disable_unprepare() were replaced by calls of clk_enable()/clk_disable(). Cc: stable@vger.kernel.org Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reported-by: Matthias Mayr <matthias.mayr@student.kit.edu> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-29net: tg3: avoid uninitialized variable warningArnd Bergmann
The tg3_set_eeprom() function correctly initializes the 'start' variable, but gcc generates a false warning: drivers/net/ethernet/broadcom/tg3.c: In function 'tg3_set_eeprom': drivers/net/ethernet/broadcom/tg3.c:12057:4: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized] I have not come up with a way to restructure the code in a way that avoids the warning without making it less readable, so this adds an initialization for the declaration to shut up that warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29net: nb8800: avoid uninitialized variable warningArnd Bergmann
The nb8800_poll() function initializes the 'next' variable in the loop looking for new input data. We know this will be called at least once because 'budget' is a guaranteed to be a positive number when we enter the function, but the compiler doesn't know that and warns when the variable is used later: drivers/net/ethernet/aurora/nb8800.c: In function 'nb8800_poll': drivers/net/ethernet/aurora/nb8800.c:350:21: warning: 'next' may be used uninitialized in this function [-Wmaybe-uninitialized] Changing the 'while() {}' loop to 'do {} while()' makes it obvious to the compiler what is going on so it no longer warns. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29net: vxge: avoid unused function warningsArnd Bergmann
When CONFIG_PCI_MSI is disabled, we get warnings about unused functions in the vxge driver: drivers/net/ethernet/neterion/vxge/vxge-main.c:2121:13: warning: 'adaptive_coalesce_tx_interrupts' defined but not used [-Wunused-function] drivers/net/ethernet/neterion/vxge/vxge-main.c:2149:13: warning: 'adaptive_coalesce_rx_interrupts' defined but not used [-Wunused-function] We could add another #ifdef here, but it's nicer to avoid those warnings for good by converting the existing #ifdef to if(IS_ENABLED()), which has the same effect but provides better compile-time coverage in general, and lets the compiler understand better when the function is intentionally unused. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29net: bgmac: clarify CONFIG_BCMA dependencyArnd Bergmann
The bgmac driver depends on BCMA_HOST_SOC, which is only used when CONFIG_BCMA is enabled. However, it is a bool option and can be set when CONFIG_BCMA=m, and then bgmac can be built-in, leading to an obvious link error: drivers/built-in.o: In function `bgmac_init': :(.init.text+0x7f2c): undefined reference to `__bcma_driver_register' drivers/built-in.o: In function `bgmac_exit': :(.exit.text+0x110a): undefined reference to `bcma_driver_unregister' To avoid this case, we need to depend on both BCMA and BCMA_SOC, as this patch does. I'm also trying to make the dependency more readable by splitting it into three lines, and adding a COMPILE_TEST alternative so we can test-build it in all configurations that support BCMA. The added dependency on FIXED_PHY addresses a related issue where we cannot call fixed_phy_register() when CONFIG_FIXED_PHY=m and CONFIG_BGMAC=y. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29net: hp100: remove unnecessary #ifdefsArnd Bergmann
Building the hp100 ethernet driver causes warnings when both the PCI and EISA drivers are disabled: ethernet/hp/hp100.c: In function 'hp100_module_init': ethernet/hp/hp100.c:3047:2: warning: label 'out3' defined but not used [-Wunused-label] ethernet/hp/hp100.c: At top level: ethernet/hp/hp100.c:2828:13: warning: 'cleanup_dev' defined but not used [-Wunused-function] We can easily avoid the warnings and make the driver look slightly nicer by removing the #ifdefs that check for the CONFIG_PCI and CONFIG_EISA, as all the registration functions are designed to have no effect when the buses are disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29net: davinci_cpdma: use dma_addr_t for DMA addressArnd Bergmann
The davinci_cpdma mixes up physical addresses as seen from the CPU and DMA addresses as seen from a DMA master, since it can operate on both normal memory or an on-chip buffer. If dma_addr_t is different from phys_addr_t, this means we get a compile-time warning about the type mismatch: ethernet/ti/davinci_cpdma.c: In function 'cpdma_desc_pool_create': ethernet/ti/davinci_cpdma.c:182:48: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys, In file included from ethernet/ti/davinci_cpdma.c:21:0: dma-mapping.h:398:21: note: expected 'dma_addr_t * {aka long long unsigned int *}' but argument is of type 'phys_addr_t * {aka unsigned int *}' static inline void *dma_alloc_coherent(struct device *dev, size_t size, This slightly restructures the code so the address we use for mapping RAM into a DMA address is always a dma_addr_t, avoiding the warning. The code is correct even if both types are 32-bit because the DMA master in this device only supports 32-bit addressing anyway, independent of the types that are used. We still assign this value to pool->phys, and that is wrong if the driver is ever used with an IOMMU, but that value appears to be never used, so there is no problem really. I've added a couple of comments about where we do things that are slightly violating the API. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29Merge tag 'wireless-drivers-for-davem-2016-01-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi * Fix support for 3168 device: * NVM version * firmware file name * device IDs * Fix a compilation warning in dvm calibration code * Fix the TPC (reduced Tx Power) code. This fixes performance issues * Add device IDs for 8265 rtx2x00 * fix monitor mode regression dating back to 4.1 brcmfmac * fix sdio initialisation related crash rtlwifi * rtl8821ae: Fix 5G failure when EEPROM is incorrectly encoded ath9k * ignore eeprom magic mismatch on flash based devices ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29vxlan: fix a out of bounds access in __vxlan_find_macLi RongQing
The size of all_zeros_mac is 6 byte, but eth_hash() will access the 8 byte, and KASan reported the below bug: [ 8596.479031] BUG: KASan: out of bounds access in __vxlan_find_mac+0x24/0x100 at addr ffffffff841514c0 [ 8596.487647] Read of size 8 by task ip/52820 [ 8596.490818] Address belongs to variable all_zeros_mac+0x0/0x40 [ 8596.496051] CPU: 0 PID: 52820 Comm: ip Tainted: G WC 4.1.15 #1 [ 8596.503520] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 02/10/2014 [ 8596.509365] ffffffff841514c0 ffff88007450f0b8 ffffffff822fa5e1 0000000000000032 [ 8596.516112] ffff88007450f150 ffff88007450f138 ffffffff812dd58c ffff88007450f1d8 [ 8596.522856] ffffffff81113b80 0000000000000282 0000000000000001 ffffffff8101ee4d [ 8596.529599] Call Trace: [ 8596.530858] [<ffffffff822fa5e1>] dump_stack+0x4f/0x7b [ 8596.535080] [<ffffffff812dd58c>] kasan_report_error+0x3bc/0x3f0 [ 8596.540258] [<ffffffff81113b80>] ? __lock_acquire+0x90/0x2140 [ 8596.545245] [<ffffffff8101ee4d>] ? save_stack_trace+0x2d/0x80 [ 8596.550234] [<ffffffff812dda70>] kasan_report+0x40/0x50 [ 8596.554647] [<ffffffff81b211e4>] ? __vxlan_find_mac+0x24/0x100 [ 8596.559729] [<ffffffff812dc399>] __asan_load8+0x69/0xa0 [ 8596.564141] [<ffffffff81b211e4>] __vxlan_find_mac+0x24/0x100 [ 8596.569033] [<ffffffff81b2683d>] vxlan_fdb_create+0x9d/0x570 it can be fixed by enlarging the all_zeros_mac to 8 byte, although it is harmless; eth_hash() will be called in other place with the memory which is larger and equal to 8 byte. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29net: dsa: mv88e6xxx: fix port VLAN mapsVivien Didelot
Currently the port based VLAN maps should be configured to allow every port to egress frames on all other ports, except themselves. The debugfs interface shows that they are misconfigured. For instance, a 7-port switch has the following content in the related register 0x06: GLOBAL GLOBAL2 SERDES 0 1 2 3 4 5 6 ... 6: 1fa4 1f0f 4 7f 7e 7d 7c 7b 7a 79 ... This means that port 3 is allowed to talk to port 2-6, but cannot talk to ports 0 and 1. With this fix, port 3 can correctly talk to all ports except 3 itself: GLOBAL GLOBAL2 SERDES 0 1 2 3 4 5 6 ... 6: 1fa4 1f0f 4 7e 7d 7b 77 6f 5f 3f ... Fixes: ede8098d0fef ("net: dsa: mv88e6xxx: bridges do not need an FID") Reported-by: Kevin Smith <kevin.smith@elecsyscorp.com> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29net: moxart: use correct accessors for DMA memoryArnd Bergmann
The moxart ethernet driver confuses coherent DMA buffers with MMIO registers. moxart_ether.c: In function 'moxart_mac_setup_desc_ring': moxart_ether.c:146:428: error: passing argument 1 of '__fswab32' makes integer from pointer without a cast [-Werror=int-conversion] moxart_ether.c:74:39: warning: incorrect type in argument 3 (different address spaces) moxart_ether.c:74:39: expected void *cpu_addr moxart_ether.c:74:39: got void [noderef] <asn:2>*tx_desc_base This leaves the basic logic alone and uses normal pointers for the virtual address of the descriptor. As we cannot use readl/writel to access them, we also introduce our own moxart_desc_read moxart_desc_write helpers that perform the same endianess swap as the original code, but without the address space conversion. The barriers are made explicit here where needed: Even in the worst-case scenario, we just have to use a rmb() after checking ownership so we don't read any input data before we are sure it is value, and we use wmb() before transferring ownership back to the device. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCMQuinn Tran
During lun reset, TMR thread from TCM would issue abort to qla driver. At abort time, each command is in different state. Depending on the state, qla will use the TMR thread to trigger a command free(cmd_kref--) if command is not down at firmware. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-29qla2xxx: Fix warning reported by static checkerHimanshu Madhani
This patch fixes following warning drivers/scsi/qla2xxx/qla_target.c:3587 qlt_do_ctio_completion() warn: impossible condition '(logged_out == 41) => (0-1 == 41)' drivers/scsi/qla2xxx/qla_target.c 3580 case CTIO_PORT_LOGGED_OUT: 3581 case CTIO_PORT_UNAVAILABLE: 3582 { 3583 bool logged_out = (status & 0xFFFF); 3584 ql_dbg(ql_dbg_tgt_mgt, vha, 0xf059, 3585 "qla_target(%d): CTIO with %s status %x " 3586 "received (state %x, se_cmd %p)\n", vha->vp_idx, 3587 (logged_out == CTIO_PORT_LOGGED_OUT) ? ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Bool cannot equal 0x26. 3588 "PORT LOGGED OUT" : "PORT UNAVAILABLE", Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-29target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectorsMike Christie
In a couple places we are not converting to/from the Linux block layer 512 bytes sectors. 1. The request queue values and what we do are a mismatch of things: max_discard_sectors - This is in linux block layer 512 byte sectors. We are just copying this to max_unmap_lba_count. discard_granularity - This is in bytes. We are converting it to Linux block layer 512 byte sectors. discard_alignment - This is in bytes. We are just copying this over. The problem is that the core LIO code exports these values in spc_emulate_evpd_b0 and we use them to test request arguments in sbc_execute_unmap, but we never convert to the block size we export to the initiator. If we are not using 512 byte sectors then we are exporting the wrong values or are checks are off. And, for the discard_alignment/bytes case we are just plain messed up. 2. blkdev_issue_discard's start and number of sector arguments are supposed to be in linux block layer 512 byte sectors. We are currently passing in the values we get from the initiator which might be based on some other sector size. There is a similar problem in iblock_execute_write_same where the bio functions want values in 512 byte sectors but we are passing in what we got from the initiator. Signed-off-by: Mike Christie <mchristi@redhat.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-29xen/blkfront: realloc ring info in blkif_resumeBob Liu
Need to reallocate ring info in the resume path, because info->rinfo was freed in blkif_free(). And 'multi-queue-max-queues' backend reports may have been changed. Signed-off-by: Bob Liu <bob.liu@oracle.com> Reported-and-Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2016-01-29libnvdimm, pfn: fix restoring memmap locationDan Williams
This path was missed when turning on the memmap in pmem support. Permit 'pmem' as a valid location for the map. Reported-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-01-29bnxt_en: Fix crash in bnxt_free_tx_skbs() during tx timeout.Michael Chan
The ring index j is not wrapped properly at the end of the ring, causing it to reference pointers past the end of the ring. For proper loop termination and to access the ring properly, we need to increment j and mask it before referencing the ring entry. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29bnxt_en: Exclude rx_drop_pkts hw counter from the stack's rx_dropped counter.Michael Chan
This hardware counter is misleading as it counts dropped packets that don't match the hardware filters for unicast/broadcast/multicast. We will still report this counter in ethtool -S for diagnostics purposes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29bnxt_en: Ring free response from close path should use completion ringPrashant Sreedharan
Use completion ring for ring free response from firmware. The response will be the last entry in the ring and we can free the ring after getting the response. This will guarantee no spurious DMA to freed memory. Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29Merge tag 'v4.5-rockchip-clkfixes1' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes Pull rockchip fixes from Heiko Stuebner: Fixes for wrong register offsets in both rk3036 and rk3368. Also rename the external input for the emac on rk3036, which should still be ok to do, as that binding was only introduced during this merge-window. * tag 'v4.5-rockchip-clkfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: rk3368: fix some clock gates clk: rockchip: rk3036: rename emac ext source clock clk: rockchip: rk3036: fix the div offset for emac clock clk: rockchip: rk3036: fix uarts clock error clk: rockchip: rk3036: fix the FLAGs for clock mux
2016-01-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "An optimization for irq-restore, the SSM instruction is quite a bit slower than an if-statement and a STOSM. The copy_file_range system all is added. Cleanup for PCI and CIO. And a couple of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: update measurement characteristics s390/cio: ensure consistent measurement state s390/cio: fix measurement characteristics memleak s390/zcrypt: Fix cryptographic device id in kernel messages s390/pci: remove iomap sanity checks s390/pci: set error state for unusable functions s390/pci: fix bar check s390/pci: resize iomap s390/pci: improve ZPCI_* macros s390/pci: provide ZPCI_ADDR macro s390/pci: adjust IOMAP_MAX_ENTRIES s390/numa: move numa_init_late() from device to arch_initcall s390: remove all usages of PSW_ADDR_INSN s390: remove all usages of PSW_ADDR_AMODE s390: wire up copy_file_range syscall s390: remove superfluous memblock_alloc() return value checks s390/numa: allocate memory with correct alignment s390/irqflags: optimize irq restore s390/mm: use TASK_MAX_SIZE where applicable
2016-01-29Merge tag 'pm+acpi-4.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are: cpuidle fixes (including one fix for a recent regression), cpufreq fixes (including fixes for two issues introduced during the 4.2 cycle), generic power domains framework fixes (two locking fixes and one cleanup), one locking fix in the ACPI-based PCI hotplug framework (ACPIPHP), removal of one ACPI backlight blacklist entry that isn't necessary any more and a PM Kconfig cleanup. Specifics: - Fix a recent cpuidle core regression that broke suspend-to-idle on all systems where cpuidle drivers don't provide ->enter_freeze callbacks for any states (Sudeep Holla). - Drop an unnecessary symbol definition from the cpuidle core code handling coupled CPU cores (Anders Roxell). - Fix a race condition related to governor initialization and removal in the cpufreq core (Viresh Kumar). - Clean up the cpufreq core to use list_is_last() for checking if the given policy object is the last element of a list instead of open coding that in a clumsy way (Gautham R Shenoy). - Fix compiler warnings in the pxa2xx and cpufreq-dt cpufreq drivers (Arnd Bergmann). - Fix two locking issues and clean up a comment in the generic power domains framework (Ulf Hansson, Marek Szyprowski, Moritz Fischer). - Fix the error code path of one function in the ACPI-based PCI hotplug framework (ACPIPHP) that forgets to release a lock acquired previously (Insu Yun). - Drop the ACPI backlight blacklist entry for Dell Inspiron 5737 that is not necessary any more (Hans de Goede). - Clean up the top-level PM Kconfig to stop requiring APM emulation to depend on PM which in fact isn't necessary (Arnd Bergmann)" * tag 'pm+acpi-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: cpufreq-dt: avoid uninitialized variable warnings: cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype PM: APM_EMULATION does not depend on PM cpufreq: Use list_is_last() to check last entry of the policy list cpufreq: Fix NULL reference crash while accessing policy->governor_data cpuidle: coupled: remove unused define cpuidle_coupled_lock PM / Domains: Fix typo in comment PM / Domains: Fix potential deadlock while adding/removing subdomains ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot() ACPI: Revert "ACPI / video: Add Dell Inspiron 5737 to the blacklist" cpuidle: fix fallback mechanism for suspend to idle in absence of enter_freeze PM / domains: fix lockdep issue for all subdomains
2016-01-29Merge branch 'stable/for-linus-4.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm Pull cleancache cleanups from Konrad Rzeszutek Wilk: "Simple cleanups" * 'stable/for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm: include/linux/cleancache.h: Clean up code cleancache: constify cleancache_ops structure
2016-01-29Merge tag 'iommu-fixes-v4.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "Five patches queued up: - Two patches for the AMD and Intel IOMMU drivers to fix alias handling and ATS handling. - Fix build error with arm io-pgtable code - Two documentation fixes" * tag 'iommu-fixes-v4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Update struct iommu_ops comments iommu/vt-d: Fix link to Intel IOMMU Specification iommu/amd: Correct the wrong setting of alias DTE in do_attach iommu/vt-d: Don't skip PCI devices when disabling IOTLB iommu/io-pgtable-arm: Fix io-pgtable-arm build failure
2016-01-29Merge tag 'hwmon-for-linus-v4.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Use bit mask to calculate tdp limit in fam15h_power driver - Black-list Dell Studio XPS 8000 in dell-smm driver * tag 'hwmon-for-linus-v4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (fam15h_power) Add bit masking for tdp_limit hwmon: (dell-smm) Blacklist Dell Studio XPS 8000
2016-01-29Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four fixes: one to try to fix our repeated intermittent crashes in suspend/resume, one to correct a regression in the optimal I/O size reporting and a couple for randconfig build failures in the hisi_sas driver" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: SCSI: fix crashes in sd and sr runtime PM sd: Optimal I/O size is in bytes, not sectors hisi_sas: Restrict SCSI_HISI_SAS to arm64 hisi_sas: SCSI_HISI_SAS should depend on HAS_DMA
2016-01-29Merge branches 'pm-cpuidle', 'pm-cpufreq', 'pm-domains' and 'pm-sleep'Rafael J. Wysocki
* pm-cpuidle: cpuidle: coupled: remove unused define cpuidle_coupled_lock cpuidle: fix fallback mechanism for suspend to idle in absence of enter_freeze * pm-cpufreq: cpufreq: cpufreq-dt: avoid uninitialized variable warnings: cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype cpufreq: Use list_is_last() to check last entry of the policy list cpufreq: Fix NULL reference crash while accessing policy->governor_data * pm-domains: PM / Domains: Fix typo in comment PM / Domains: Fix potential deadlock while adding/removing subdomains PM / domains: fix lockdep issue for all subdomains * pm-sleep: PM: APM_EMULATION does not depend on PM
2016-01-29Merge branches 'acpi-video' and 'acpi-hotplug'Rafael J. Wysocki
* acpi-video: ACPI: Revert "ACPI / video: Add Dell Inspiron 5737 to the blacklist" * acpi-hotplug: ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot()
2016-01-29ptp: ixp46x: use helpers for converting ns to timespecKefeng Wang
Convert the driver to use ns_to_timespec64() and timespec64_to_ns() instead of open coding the same logic. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Summary: - Misc amdgpu/radeon fixes - VC4 build fix - vmwgfx fix - misc rockchip fixes The etnaviv guys had an API feature they wanted in their first release, so I've merged that with their fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (41 commits) drm/vmwgfx: respect 'nomodeset' drm/amdgpu: only move pt bos in LRU list on success drm/radeon: fix DP audio support for APU with DCE4.1 display engine drm/radeon: Add a common function for DFS handling drm/radeon: cleaned up VCO output settings for DP audio drm/amd/powerplay: Update SMU firmware loading for Stoney drm/etnaviv: call correct function when trying to vmap a DMABUF drm/etnaviv: rename etnaviv_gem_vaddr to etnaviv_gem_vmap drm/etnaviv: fix get pages error path in etnaviv_gem_vaddr drm/etnaviv: fix memory leak in IOMMU init path drm/etnaviv: add further minor features and varyings count drm/etnaviv: add helper for comparing model/revision IDs drm/etnaviv: add helper to extract bitfields drm/etnaviv: use defined constants for the chip model drm/etnaviv: update common and state_hi xml.h files drm/etnaviv: ignore VG GPUs with FE2.0 drm/amdgpu: don't init fbdev if we don't have any connectors drm/radeon: only init fbdev if we have connectors drm/radeon: Ensure radeon bo is unreserved in radeon_gem_va_ioctl drm/etnaviv: fix failure path if model is zero ...
2016-01-29macvlan: make operstate and carrier more accurateNikolay Aleksandrov
Currently when a macvlan is being initialized and the lower device is netif_carrier_ok(), the macvlan device doesn't run through rfc2863_policy() and is left with UNKNOWN operstate. Fix it by adding an unconditional linkwatch event for the new macvlan device. Similar fix is already used by the 8021q device (see register_vlan_dev()). Also fix the inconsistent state when the lower device has been down and its carrier was changed (when a device is down NETDEV_CHANGE doesn't get generated). The second issue can be seen f.e. when we have a macvlan on top of a 8021q device which has been down and its real device has been changing carrier states, after setting the 8021q device up, the macvlan device will have the same carrier state as it was before even though the 8021q can now have a different state. Example for case 1: 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 $ ip l add l eth2 macvl0 type macvlan $ ip l set macvl0 up $ ip l sh macvl0 72: macvl0@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether f6:0b:54:0a:9d:a3 brd ff:ff:ff:ff:ff:ff Example for case 2 (order is important): Prestate: eth2 UP/CARRIER, vlan1 down, vlan1-macvlan down $ ip l set vlan1-macvlan up $ ip l sh vlan1-macvlan 71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff [ eth2 loses CARRIER before vlan1 has been UP-ed ] $ ip l sh eth2 4: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:bf:57:16 brd ff:ff:ff:ff:ff:ff $ ip l sh vlan1-macvlan 71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff $ ip l set vlan1 up $ ip l sh vlan1 70: vlan1@eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:bf:57:16 brd ff:ff:ff:ff:ff:ff $ ip l sh vlan1-macvlan 71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff vlan1-macvlan is still UP, still has carrier and is still in the same operstate as before. After the patch in case 1 macvl0 has state UP as it should and in case 2 vlan1-macvlan has state LOWERLAYERDOWN again as it should. Note that while the lower macvlan device is down their carrier and thus operstate can go out of sync but that will be fixed once the lower device goes up again. This behaviour seems to have been present since beginning of git history. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29net: cavium: liquidio: use helpers ns_to_timespec64()Kefeng Wang
Convert the driver to use ns_to_timespec64() to keep consistency with timespec64_to_ns() instead of open coding the same logic. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29clk: tango4: rename ARCH_TANGOX to ARCH_TANGOMarc Gonzalez
Requested by arm-soc maintainer Kevin Hilman in v9 review. http://article.gmane.org/gmane.linux.ports.arm.kernel/456331 Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-29clk: scpi: Fix checking return value of platform_device_register_simple()Axel Lin
platform_device_register_simple() returns ERR_PTR on error. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-29clk: mvebu: Mark ioremapped memory as __iomemStephen Boyd
Silence the following sparse warning drivers/clk/mvebu/dove-divider.c:252:14: warning: incorrect type in assignment (different address spaces) drivers/clk/mvebu/dove-divider.c:252:14: expected void *base drivers/clk/mvebu/dove-divider.c:252:14: got void [noderef] <asn:2>* drivers/clk/mvebu/dove-divider.c:256:13: warning: incorrect type in argument 2 (different address spaces) drivers/clk/mvebu/dove-divider.c:256:13: expected void [noderef] <asn:2>*base drivers/clk/mvebu/dove-divider.c:256:13: got void *base drivers/clk/mvebu/dove-divider.c:257:25: warning: incorrect type in argument 1 (different address spaces) drivers/clk/mvebu/dove-divider.c:257:25: expected void volatile [noderef] <asn:2>*iomem_cookie drivers/clk/mvebu/dove-divider.c:257:25: got void *base Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-29serial: 8250_pci: Add Intel Broadwell portsMika Westerberg
Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as used on Intel Baytrail so we can reuse the existing Baytrail setup code. Add both Broadwell LPSS UART ports to the list of supported devices. Signed-off-by: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-29drm/amdgpu: no need to load MC firmware on fijiAlex Deucher
Vbios does this for us on asic_init. Reviewed-by: Ken Wang >Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-01-29video: fbdev: imxfb: Provide a reset mechanismFabio Estevam
Currently when we boot the kernel on a mx25pdk the LCDC controller does not show the Linux logo on boot. This problem is well explained by Sascha Hauer: "Unfortunately this LCD controller does not have an enable bit. The controller starts directly when the clocks are enabled. If the clocks are enabled when the controller is not yet programmed with proper register values then it just goes into some undefined state. What I suspect is that the clocks already were enabled before driver probe, presumably by the bootloader, so the controller is already in undefined state when entering Linux. Now by dis/enabling the ipg clock you effectively reset the controller. Since you have programmed it with valid register values in the mean time it starts working after this reset." So do as suggested and force a reset of the LCDC hardware by enabling and disabling the IPG clock. With this change the Linux logo can be seen on boot on a mx25pdk. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-01-29libata-sff: use WARN instead of BUG on illegal host state machine stateTejun Heo
ata_sff_hsm_move() triggers BUG if it sees a host state machine state that it dind't expect. The risk for data corruption when the condition occurs is low as it's highly unlikely that it would lead to spurious completion of commands. The BUG occasionally triggered for subtle race conditions in the driver. Let's downgrade it to WARN so that it doesn't kill the machine unnecessarily. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Dmitry Vyukov <dvyukov@google.com>
2016-01-29fbdev: mmp: print IRQ resource using %pR format stringArnd Bergmann
resource_size_t cannot be printed using the %x format string when we it is defined as u64: drivers/video/fbdev/mmp/hw/mmp_ctrl.c: In function 'mmphw_probe': drivers/video/fbdev/mmp/hw/mmp_ctrl.c:506:22: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=] dev_err(ctrl->dev, "%s: res %x - %x map failed\n", __func__, ^ drivers/video/fbdev/mmp/hw/mmp_ctrl.c:506:22: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=] This changes the format string to %pR, which is interpreted by the printk implementation to pretty-print a resource structure. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-01-29fbdev: da8xx-fb: remove incorrect type castArnd Bergmann
The probe function correct passes a dma_addr_t pointer into dma_alloc_coherent(), but has a cast to resource_size_t, which might be different from dma_addr_t: drivers/video/fbdev/da8xx-fb.c: In function 'fb_probe': drivers/video/fbdev/da8xx-fb.c:1431:10: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] This removes the cast, which avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-01-29fbdev: s6e8ax0: avoid unused function warningsArnd Bergmann
The s6e8ax0 suspend/resume functions are hidden inside of an #ifdef when CONFIG_PM is set to avoid unused function warnings, but they call some other functions that nothing else calls, and we get warnings about those: drivers/video/fbdev/exynos/s6e8ax0.c:449:13: error: 's6e8ax0_sleep_in' defined but not used [-Werror=unused-function] drivers/video/fbdev/exynos/s6e8ax0.c:485:13: error: 's6e8ax0_display_off' defined but not used [-Werror=unused-function] This marks the PM functions as __maybe_unused so the compiler can silently drop them when they are not referenced. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
generated by cgit (git 2.34.1) at 2025-09-15 07:53:41 +0000