summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-01-19asus-wireless: Add ACPI HID ATK4001João Paulo Rechi Vita
As reported in https://bugzilla.kernel.org/show_bug.cgi?id=98931#c22 in the Asus UX31A the Asus Wireless Radio Control device (ASHS) uses the HID "ATK4001". Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Reported-by: Tasev Nikola <tasev.stefanoska@skynet.be> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-19platform/x86: Add Asus Wireless Radio Control driverJoão Paulo Rechi Vita
Some Asus notebooks like the Asus E202SA and the Asus X555UB have a separate ACPI device for notifications from the airplane mode hotkey. This device is called "Wireless Radio Control" in Asus websites and ASHS in the DSDT, and its ACPI _HID is ATK4002 in the two models mentioned above. For these models, when the airplane mode hotkey (Fn+F2) is pressed, a query 0x0B is started in the Embedded Controller, and all this query does is a notify ASHS with the value 0x88 (for acpi_osi >= "Windows 2012"): Scope (_SB.PCI0.SBRG.EC0) { (...) Method (_Q0B, 0, NotSerialized) // _Qxx: EC Query { If ((MSOS () >= OSW8)) { Notify (ASHS, 0x88) // Device-Specific } Else { (...) } } } Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-19asus-wmi: drop to_platform_driver macroGeliang Tang
to_platform_driver has been defined in platform_device.h, so drop this repetitive macro in asus-wmi.c. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-19intel-hid: new hid event driver for hotkeysAlex Hung
This driver supports various HID events including hotkeys. Dell XPS 13 9350 requires it for the wireless hotkey. Signed-off-by: Alex Hung <alex.hung@canonical.com> Reviewed-and-tested-by: Andy Lutomirski <luto@kernel.org> [dvhart: Kconfig help typo fix and INPUT_SPARSEKMAP fix from Sedat Dilek] Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-20drm/rockchip: explain why we can't wait_for_vblanksJohn Keeping
Signed-off-by: John Keeping <john@metanate.com>
2016-01-20drm/rockchip: don't wait for vblank if fb hasn't changedJohn Keeping
As commented in drm_atomic_helper_wait_for_vblanks(), userspace relies on cursor ioctls being unsynced. Converting the rockchip driver to atomic has significantly impacted cursor performance by making every cursor update wait for vblank. By skipping the vblank sync when the framebuffer has not changed (as is done in drm_atomic_helper_wait_for_vblanks()) we can avoid this for the common case of moving the cursor and only need to delay the cursor ioctl when the cursor icon changes. We cannot add the check on legacy_cursor_update since that results in the cursor bo being unreferenced while the hardware may still be reading it. Fully supporting unsynced cursor updates is left for the future when the atomic helper framework supports async updates. Signed-off-by: John Keeping <john@metanate.com> Tested-by: Heiko Stuebner <heiko@sntech.de>
2016-01-20drm/atomic-helper: Export framebuffer_changed()John Keeping
The Rockchip driver cannot use drm_atomic_helper_wait_for_vblanks() because it has hardware counters for neither vblanks nor scanlines. In order to simplify re-implementing the functionality for this driver, export the framebuffer_changed() helper so it can be reused. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-19Keyboard backlight control for some Vaio Fit modelsMattia Dongili
SVF1521P6EW, SVF1521DCXW, SVF13N1L2ES and likely most SVF*. do not expose separate timeout controls in auto mode. Signed-off-by: Dominik Matta <dominik@matta.sk> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-19platform/x86: Add rfkill dependency to ACPI_TOSHIBA entryAzael Avalos
Commit 2fdde83443aa ("toshiba_acpi: Add WWAN RFKill support") added WWAN rfkill support to the driver, but the KConfig entry was not updated to add the RFKill dependency, causing a broken build if RFKill is not selected. This patch adds the RFKILL dependency to the KConfig entry, fixing the build issue. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-19platform:x86: add Intel P-Unit mailbox IPC driverQipeng Zha
This driver provides support for P-Unit mailbox IPC on Intel platforms. The heart of the P-Unit is the Foxton microcontroller and its firmware, which provide mailbox interface for power management usage. Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-19intel_pmc_ipc: update acpi resource structure for PunitQipeng Zha
BIOS restructure exported memory resources for Punit in acpi table, So update resources for Punit. Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-19ideapad-laptop: Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi listJosh Boyer
One of the newest ideapad models also lacks a physical hw rfkill switch, and trying to read the hw rfkill switch through the ideapad module causes it to always reported blocking breaking wifi. Fix it by adding this model to the DMI list. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1286293 Cc: stable@vger.kernel.org Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-19dell-wmi: Improve unknown hotkey handlingAndy Lutomirski
If DMI lists a hotkey that we don't recognize, log and ignore it instead of trying to map it to keycode 0. I haven't seen this happen, but it will help maintain the key map in the future and it will help avoid sending bogus events. This also improves the message that we log when we get an unknown key event. Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> [dvhart: remove BUILD_BUG_ON per mutual agreement on list] Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-19apple-gmux: Assign apple_gmux_data before registeringMatthew Garrett
Registering the handler after both GPUs will trigger a DDC switch for connector reprobing. This will oops if apple_gmux_data hasn't already been assigned. Reorder the code to do that. [Lukas: More generally, this commit fixes a race condition that is triggered by invoking a handler callback between the call to vga_switcheroo_register_handler() and the assignment of apple_gmux_data.] Tested-by: Pierre Moreau <pierre.morrow@free.fr> [MBP 5,3 2009 nvidia MCP79 + G96 pre-retina 15"] Tested-by: Paul Hordiienko <pvt.gord@gmail.com> [MBP 6,2 2010 intel ILK + nvidia GT216 pre-retina 15"] Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Tested-by: William Brown <william@blackhats.net.au> [MBP 8,2 2011 intel SNB + amd turks pre-retina 15"] Tested-by: Bruno Bierbaumer <bruno@bierbaumer.net> [MBP 11,3 2013 intel HSW + nvidia GK107 retina 15"] Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-19toshiba_acpi: Fix keyboard backlight sysfs entries not being updatedAzael Avalos
Certain Toshiba models with the second generation keyboard backlight (type 2) do not generate the keyboard backlight changed event (0x92), and thus, the sysfs entries are never being updated. This patch adds a workquee and a global boolean variable to address the issue. For those models that do generate the event, the sysfs entries are being updated via the *notify function and the boolean is set to true to avoid a second call to update the entries. For those models that do not generate the event, the workquee is used to update the sysfs entries and also to emulate the event via netlink, to make userspace aware of such change. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-19Merge branch 'for-4.5/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: "We don't have a lot of core changes this time around, it's mostly in drivers, which will come in a subsequent pull. The cores changes include: - blk-mq - Prep patch from Christoph, changing blk_mq_alloc_request() to take flags instead of just using gfp_t for sleep/nosleep. - Doc patch from me, clarifying the difference between legacy and blk-mq for timer usage. - Fixes from Raghavendra for memory-less numa nodes, and a reuse of CPU masks. - Cleanup from Geliang Tang, using offset_in_page() instead of open coding it. - From Ilya, rename request_queue slab to it reflects what it holds, and a fix for proper use of bdgrab/put. - A real fix for the split across stripe boundaries from Keith. We yanked a broken version of this from 4.4-rc final, this one works. - From Mike Krinkin, emit a trace message when we split. - From Wei Tang, two small cleanups, not explicitly clearing memory that is already cleared" * 'for-4.5/core' of git://git.kernel.dk/linux-block: block: use bd{grab,put}() instead of open-coding block: split bios to max possible length block: add call to split trace point blk-mq: Avoid memoryless numa node encoded in hctx numa_node blk-mq: Reuse hardware context cpumask for tags blk-mq: add a flags parameter to blk_mq_alloc_request Revert "blk-flush: Queue through IO scheduler when flush not required" block: clarify blk_add_timer() use case for blk-mq bio: use offset_in_page macro block: do not initialise statics to 0 or NULL block: do not initialise globals to 0 or NULL block: rename request_queue slab cache
2016-01-19IB/srpt: Remove redundant wc arraySagi Grimberg
No usage after the conversion to the new CQ API. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19drm/vc4: Remove broken attempt at GPU reset using genpd.Eric Anholt
I've tested and confirmed that it doesn't actually work. We'll need to sort out how to do this properly later, but for now just remove it since it also caused build breakage due to using CONFIG_PM_SLEEP functions without our Kconfig depending on PM_SLEEP. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
2016-01-19IB/qib: Improve ipoib UD performanceMike Marciniszyn
Based on profiling, UD performance drops in case of processes in a single client due to excess context switches when the progress workqueue is scheduled. This is solved by modifying the heuristic to select the direct progress instead of the scheduling progress via the workqueue when UD-like situations are detected in the heuristic. Reviewed-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Advertise RoCE v2 supportMatan Barak
Advertise RoCE v2 support in port_immutable attributes according to the hardware's capabilities. This enables the verbs stack to use RoCE v2 mode. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Create and use another QP1 for RoCEv2Moni Shoua
The mlx4 driver uses a special QP to implement the GSI QP. This kind of QP allows to build the InfiniBand headers in software. When mlx4 hardware builds the packet, it calculates the ICRC and puts it at the end of the payload. However, this ICRC calculation depends on the QP configuration, which is determined when the QP is modified (roce_mode during INIT->RTR). When receiving a packet, the ICRC verification doesn't depend on this configuration. Therefore, using two GSI QPs for send (one for each RoCE version) and one GSI QP for receive are required. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headersMoni Shoua
RoCEv2 packets are sent over IP/UDP protocols. The mlx4 driver uses a type of RAW QP to send packets for QP1 and therefore needs to build the network headers below BTH in software. This patch adds option to build QP1 packets with IP and UDP headers if RoCEv2 is requested. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Enable RoCE v2 when the IB device is addedMoni Shoua
If the hardware supports RoCE v2, we configure the hardware UDP port according to the RoCE v2 Annex when mlx4_ib device is added. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Support modify_qp for RoCE v2Moni Shoua
In order to support modify_qp for RoCE v2, we need to set the gid_type in the QP context. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19net/mlx4_core: Add support for RoCE v2 entropyMoni Shoua
In RoCE v2 we need to choose a source UDP port, we do so by using entropy over the source and dest QPNs. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19net/mlx4_core: Add support for configuring RoCE v2 UDP portMoni Shoua
In order to support RoCE v2, the hardware needs to be configured to classify certain UDP packets as RoCE v2 packets and pass it through its RoCE pipeline. This patch enables configuring this UDP port. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Add support for setting RoCEv2 gids in hardwareMoni Shoua
To tell hardware about a gid with type RoCEv2, software needs a new modifier to the SET_PORT command: MLX4_SET_PORT_ROCE_ADDR. This can replace the old method, MLX4_SET_PORT_GID_TABLE, for RoCEv1 gids. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19net/mlx4_core: Configure mlx4 hardware for mixed RoCE v1/v2 modesMoni Shoua
If the hardware supports RoCE v2 (mixed with RoCE v1) mode, we enable it. This is necessary in order to support RoCE v2. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Add gid_type to GID propertiesMoni Shoua
IB core driver adds a property of type to struct ib_gid_attr. The mlx4 driver should take that in consideration when modifying or querying the hardware gid table. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19net/mlx4: Query RoCE supportMoni Shoua
Query the RoCE support from firmware using the appropriate firmware commands. Downstream patches will read these capabilities and act accordingly. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Use hop-limit from IP stack for RoCEMatan Barak
Previously, IPV6_DEFAULT_HOPLIMIT was used as the hop limit value for RoCE. Fixing that by taking ip4_dst_hoplimit and ip6_dst_hoplimit as hop limit values. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Rename rdma_addr_find_dmac_by_grhMatan Barak
rdma_addr_find_dmac_by_grh resolves dmac, vlan_id and if_index and downsteram patch will also add hop_limit as an output parameter, thus we rename it to rdma_addr_find_l2_eth_by_grh. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/cm: Fix a recently introduced deadlockBart Van Assche
ib_send_cm_drep() calls cm_enter_timewait() while holding a spinlock that can be locked from inside an interrupt handler. Hence do not enable interrupts inside cm_enter_timewait() if called with interrupts disabled. This patch fixes e.g. the following deadlock: Acked-by: Erez Shitrit <erezsh@mellanox.com> ================================= [ INFO: inconsistent lock state ] 4.4.0-rc7+ #1 Tainted: G E --------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. swapper/8/0 [HC1[1]:SC0[0]:HE0:SE1] takes: (&(&cm_id_priv->lock)->rlock){?.+...}, at: [<ffffffffa036eec4>] cm_establish+0x 74/0x1b0 [ib_cm] {HARDIRQ-ON-W} state was registered at: [<ffffffff810a3c11>] mark_held_locks+0x71/0x90 [<ffffffff810a3e87>] trace_hardirqs_on_caller+0xa7/0x1c0 [<ffffffff810a3fad>] trace_hardirqs_on+0xd/0x10 [<ffffffff8151c40b>] _raw_spin_unlock_irq+0x2b/0x40 [<ffffffffa036ea8e>] cm_enter_timewait+0xae/0x100 [ib_cm] [<ffffffffa036ff76>] ib_send_cm_drep+0xb6/0x190 [ib_cm] [<ffffffffa052ed08>] srp_cm_handler+0x128/0x1a0 [ib_srp] [<ffffffffa0370340>] cm_process_work+0x20/0xf0 [ib_cm] [<ffffffffa0371335>] cm_dreq_handler+0x135/0x2c0 [ib_cm] [<ffffffffa03733c5>] cm_work_handler+0x75/0xd0 [ib_cm] [<ffffffff8107184d>] process_one_work+0x1bd/0x460 [<ffffffff81073148>] worker_thread+0x118/0x420 [<ffffffff81078454>] kthread+0xe4/0x100 [<ffffffff8151cbbf>] ret_from_fork+0x3f/0x70 irq event stamp: 1672286 hardirqs last enabled at (1672283): [<ffffffff81408ec0>] poll_idle+0x10/0x80 hardirqs last disabled at (1672284): [<ffffffff8151d304>] common_interrupt+0x84/0x89 softirqs last enabled at (1672286): [<ffffffff8105b4dc>] _local_bh_enable+0x1c/0x50 softirqs last disabled at (1672285): [<ffffffff8105b697>] irq_enter+0x47/0x70 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&cm_id_priv->lock)->rlock); <Interrupt> lock(&(&cm_id_priv->lock)->rlock); *** DEADLOCK *** no locks held by swapper/8/0. stack backtrace: CPU: 8 PID: 0 Comm: swapper/8 Tainted: G E 4.4.0-rc7+ #1 Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.0.2 11/17/2014 ffff88045af5e950 ffff88046e503a88 ffffffff81251c1b 0000000000000007 0000000000000006 0000000000000003 ffff88045af5ddc0 ffff88046e503ad8 ffffffff810a32f4 0000000000000000 0000000000000000 0000000000000001 Call Trace: <IRQ> [<ffffffff81251c1b>] dump_stack+0x4f/0x74 [<ffffffff810a32f4>] print_usage_bug+0x184/0x190 [<ffffffff810a36e2>] mark_lock_irq+0xf2/0x290 [<ffffffff810a3995>] mark_lock+0x115/0x1b0 [<ffffffff810a3b8c>] mark_irqflags+0x15c/0x170 [<ffffffff810a4fef>] __lock_acquire+0x1ef/0x560 [<ffffffff810a53c2>] lock_acquire+0x62/0x80 [<ffffffff8151bd33>] _raw_spin_lock_irqsave+0x43/0x60 [<ffffffffa036eec4>] cm_establish+0x74/0x1b0 [ib_cm] [<ffffffffa036f031>] ib_cm_notify+0x31/0x100 [ib_cm] [<ffffffffa0637f24>] srpt_qp_event+0x54/0xd0 [ib_srpt] [<ffffffffa0196052>] mlx4_ib_qp_event+0x72/0xc0 [mlx4_ib] [<ffffffffa00775b9>] mlx4_qp_event+0x69/0xd0 [mlx4_core] [<ffffffffa006000e>] mlx4_eq_int+0x51e/0xd50 [mlx4_core] [<ffffffffa006084f>] mlx4_msi_x_interrupt+0xf/0x20 [mlx4_core] [<ffffffff810b67b0>] handle_irq_event_percpu+0x40/0x110 [<ffffffff810b68bf>] handle_irq_event+0x3f/0x70 [<ffffffff810ba7f9>] handle_edge_irq+0x79/0x120 [<ffffffff81007f3d>] handle_irq+0x5d/0x130 [<ffffffff810071fd>] do_IRQ+0x6d/0x130 [<ffffffff8151d309>] common_interrupt+0x89/0x89 <EOI> [<ffffffff8140895f>] cpuidle_enter_state+0xcf/0x200 [<ffffffff81408aa2>] cpuidle_enter+0x12/0x20 [<ffffffff810990d6>] call_cpuidle+0x36/0x60 [<ffffffff81099163>] cpuidle_idle_call+0x63/0x110 [<ffffffff8109930a>] cpu_idle_loop+0xfa/0x130 [<ffffffff8109934e>] cpu_startup_entry+0xe/0x10 [<ffffffff8103c443>] start_secondary+0x83/0x90 Fixes: commit be4b499323bf ("IB/cm: Do not queue work to a device that's going away") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/srpt: Fix the RDMA completion handlersBart Van Assche
Avoid that the following kernel crash is triggered when processing an RDMA completion: BUG: unable to handle kernel paging request at 0000000100000198 IP: [<ffffffff810a4ea2>] __lock_acquire+0xa2/0x560 Call Trace: [<ffffffff810a53c2>] lock_acquire+0x62/0x80 [<ffffffff8151bd33>] _raw_spin_lock_irqsave+0x43/0x60 [<ffffffffa04fd437>] srpt_rdma_read_done+0x57/0x120 [ib_srpt] [<ffffffffa0144dd3>] __ib_process_cq+0x43/0xc0 [ib_core] [<ffffffffa0145115>] ib_cq_poll_work+0x25/0x70 [ib_core] [<ffffffff8107184d>] process_one_work+0x1bd/0x460 [<ffffffff81073148>] worker_thread+0x118/0x420 [<ffffffff81078454>] kthread+0xe4/0x100 [<ffffffff8151cbbf>] ret_from_fork+0x3f/0x70 Fixes: commit 59fae4deaad3 ("IB/srpt: chain RDMA READ/WRITE requests"). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Fix dereference before checkMatan Barak
Sparse complains about dereference before check. Fixing this by moving the check before the dereference. Fixes: 200298326b27 ('IB/core: Validate route when we init ah') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Eliminate sparse false context imbalance warningMatan Barak
When write_gid function needs to do a sleep-able operation, it unlocks table->rwlock and then relocks it. Sparse complains about context imbalance. This is safe as write_gid is always called with table->rwlock. write_gid protects from simultaneous writes to this GID entry by setting the GID_TABLE_ENTRY_INVALID flag. Fixes: 9c584f049596 ('IB/core: Change per-entry lock in RoCE GID table to one lock') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: sysfs.c: Fix PerfMgt ClassPortInfo handlingHal Rosenstock
Port number is not part of ClassPortInfo attribute but is still needed as a parameter when invoking process_mad. To properly handle this attribute, port_num is added as a parameter to get_counter_table and get_perf_mad was changed not to store port_num in the attribute itself when it's querying the ClassPortInfo attribute. This handles issue pointed out by Matan Barak <matanb@dev.mellanox.co.il> Fixes: 145d9c541032 ('IB/core: Display extended counter set if available') Signed-off-by: Hal Rosenstock <hal@mellanox.com> Acked-by: Matan Barak <matanb@mellanox.com> Acked-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Christoph Lameter <cl@linux.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Remove set-but-not-used variable from ib_sg_to_pages()Bart Van Assche
Detected this by building the IB core with W=1. See also patch "IB core: Fix ib_sg_to_pages()" (commit 8f5ba10ed40a). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Leon Romanovsky <leon.romanovsky@mellanox.com> Acked-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx5: Fix passing casted pointer in mlx5_query_port_roceLeon Romanovsky
Fix static checker warning: drivers/infiniband/hw/mlx5/main.c:149 mlx5_query_port_roce() warn: passing casted pointer '&props->qkey_viol_cntr' to 'mlx5_query_nic_vport_qkey_viol_cntr()' 32 vs 16. Fixes: 3f89a643eb29 ("IB/mlx5: Extend query_device/port to support RoCE") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mad: use CQ abstractionChristoph Hellwig
Remove the local workqueue to process mad completions and use the CQ API instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mad: pass ib_mad_send_buf explicitly to the recv_handlerChristoph Hellwig
Stop abusing wr_id and just pass the parameter explicitly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19infiniband: Replace memset with eth_zero_addrLucas Tanure
Use eth_zero_addr to assign the zero address to the given address array instead of memset when second argument is address of zero. Signed-off-by: Lucas Tanure <tanure@linux.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx5: Delete locally redefined variableLeon Romanovsky
Fix the following sparse warning: drivers/infiniband/hw/mlx5/main.c:1061:29: warning: symbol 'pfn' shadows an earlier one drivers/infiniband/hw/mlx5/main.c:1030:21: originally declared here Fixes: d69e3bcf7976 ('IB/mlx5: Mmap the HCA's core clock register to user-space') Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Take source mac from AH instead from the portMoni Shoua
In commit dbf727de7440 ("IB/core: Use GID table in AH creation and dmac resolution") we copy source mac to mlx4_ah from the attributes of gid at ib_ah_attr.grh.sgid_index. Now we can use it. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Initialize hop_limit when creating address handleMatan Barak
Hop limit value wasn't copied from attributes when ah was created. This may influence packets for unconnected services to get dropped in routers when endpoints are not in the same subnet. Fixes: fa417f7b520e ("IB/mlx4: Add support for IBoE") Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx5: Expose correct maximum number of CQE capacityLeon Romanovsky
Maximum number of EQE capacity per CQ was mistakenly exposed as CQE. Fix that. Fixes: 938fe83c8dcb ("net/mlx5_core: New device capabilities handling") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Cc: <stable@vger.kernel.org> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19iw_cxgb4: Take clip reference before starting IPv6 listenHariprasad S
The h/w is designed in such a way that, if you do anything IPv6 related, a valid clip entry must be there. So take clip reference before creating IPv6 listening servers, and then if we fail to create server, release the clip entry. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19iw_cxgb4: Fixes GW-Basic labels to meaningful error namesHariprasad S
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19iw_cxgb4: Fixes static checker warning in c4iw_rdev_open()Hariprasad S
Commit c5dfb000b904 ("iw_cxgb4: Pass qid range to user space driver") from Dec 11, 2015, leads to the following static checker warning: drivers/infiniband/hw/cxgb4/device.c:857 c4iw_rdev_open() warn: variable dereferenced before check 'rdev->status_page' Also we weren't deallocating ocqp pool in error path when failed to allocate status page. Fixing it too. Fixes: c5dfb000b904 ("iw_cxgb4: Pass qid range to user space driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/cma: allocating too much memory in make_cma_ports()Dan Carpenter
The issue here is that there is a cut and paste bug. When we allocate cma_dev_group->default_ports_group we use "sizeof(*cma_dev_group->ports)" instead of "sizeof(*cma_dev_group->default_ports_group)". We're bumping up against the 80 character limit so I introduced a new local pointer "ports_group" to get around that. Fixes: 045959db65c6 ('IB/cma: Add configfs for rdma_cm') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-16 17:03:09 +0000