summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-02-22drm/imx: imx-tve: depend on COMMON_CLKPhilipp Zabel
Since the TVE provides a clock to the DI, the driver can only be compiled if the common clock framework is enabled. With the COMMON_CLK dependency in place, it will be possible to allow building the other parts of imx-drm under COMPILE_TEST on architectures that do not select the common clock framework. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-22drm/imx: ipuv3-plane: add zpos propertyPhilipp Zabel
Add a zpos property to planes. Call drm_atomic_helper_check() instead of calling drm_atomic_helper_check_modeset() and drm_atomic_check_planes() manually. This effectively adds a call to drm_atomic_normalize_zpos() before checking planes. Reorder atomic update to allow changing plane zpos without modeset. Note that the initial zpos is set in ipu_plane_state_reset(). The initial value set in ipu_plane_init() is just for show. The zpos parameter of drm_plane_create_zpos_property() is ignored because the newly created plane do not have state yet. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Marius Vlad <marius.vlad@collabora.com>
2019-02-22drm/imx: ipuv3-plane: add function to query atomic update statusLucas Stach
This function allows upper layer to check if a requested atomic update to the plane has been applied or is still pending. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> [p.zabel@pengutronix.de: inverted logic: done -> pending] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-02-22gpu: ipu-v3: prg: add function to get channel configure statusLucas Stach
This allows channels using the PRG to check if a requested configuration update has been applied or is still pending. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> [p.zabel@pengutronix.de: inverted logic: done -> pending] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-02-22gpu: ipu-v3: pre: add double buffer status readbackLucas Stach
This allows the upper layers to check if a double buffer update has been applied by the PRE or is still pending. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> [p.zabel@pengutronix.de: inverted logic: done -> pending] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-02-22PCI: pci-bridge-emul: Extend pci_bridge_emul_init() with flagsThomas Petazzoni
Depending on the capabilities of the PCI controller/platform, the PCI-to-PCI bridge emulation behavior might need to be different. For example, on platforms that use the pci-mvebu code, we currently don't support prefetchable memory BARs, so the corresponding fields in the PCI-to-PCI bridge configuration space should be read-only. To implement this, extend pci_bridge_emul_init() to take a "flags" argument, with currently one flag supported: PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR that will make the prefetchable memory base and limit registers read-only. The pci-mvebu and pci-aardvark drivers are updated accordingly. Fixes: 1f08673eef123 ("PCI: mvebu: Convert to PCI emulated bridge config space") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Reported-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Cc: Luís Mendes <luis.p.mendes@gmail.com> Cc: Leigh Brown <leigh@solinno.co.uk>
2019-02-22PCI: pci-bridge-emul: Create per-bridge copy of register behaviorThomas Petazzoni
The behavior of the different registers of the PCI-to-PCI bridge is currently encoded in two global arrays, shared by all instances of PCI-to-PCI bridge emulation. However, we will need to tweak the behavior on a per-bridge basis, to accommodate for different capabilities of the platforms where this code is used. In preparation for this, create a per-bridge copy of the register behavior arrays, so that they can later be tweaked on a per-bridge basis. Fixes: 1f08673eef123 ("PCI: mvebu: Convert to PCI emulated bridge config space") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Reported-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Cc: Luís Mendes <luis.p.mendes@gmail.com> Cc: Leigh Brown <leigh@solinno.co.uk>
2019-02-22irqchip/imx-irqsteer: Add multi output interrupts supportAisheng Dong
One irqsteer channel can support up to 8 output interrupts. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-22irqchip/imx-irqsteer: Change to use reg_num instead of irq_groupAisheng Dong
One group can manage 64 interrupts by using two registers (e.g. STATUS/SET). However, the integrated irqsteer may support only 32 interrupts which needs only one register in a group. But the current driver assume there's a mininum of two registers in a group which result in a wrong register map for 32 interrupts per channel irqsteer. Let's use the reg_num caculated by interrupts per channel instead of irq_group to cover this case. Cc: Rob Herring <robh+dt@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-22Merge branch 'pm-cpufreq-fixes'Rafael J. Wysocki
* pm-cpufreq-fixes: cpufreq: scmi: Fix use-after-free in scmi_cpufreq_exit()
2019-02-22drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()Bartosz Golaszewski
We only build devm_ioremap_resource() if HAS_IOMEM is selected, so this dependency must cascade down to devm_platform_ioremap_resource(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-22usb: core: add option of only authorizing internal devicesDmitry Torokhov
On Chrome OS we want to use USBguard to potentially limit access to USB devices based on policy. We however to do not want to wait for userspace to come up before initializing fixed USB devices to not regress our boot times. This patch adds option to instruct the kernel to only authorize devices connected to the internal ports. Previously we could either authorize all or none (or, by default, we'd only authorize wired devices). The behavior is controlled via usbcore.authorized_default command line option. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-22s390: vfio_ap: link the vfio_ap devices to the vfio_ap bus subsystemPierre Morel
Libudev relies on having a subsystem link for non-root devices. To avoid libudev (and potentially other userspace tools) choking on the matrix device let us introduce a matrix bus and with it the matrix bus subsytem. Also make the matrix device reside within the matrix bus. Doing this we remove the forced link from the matrix device to the vfio_ap driver and the device_type we do not need anymore. Since the associated matrix driver is not the vfio_ap driver any more, we have to change the search for the devices on the vfio_ap driver in the function vfio_ap_verify_queue_reserved. Fixes: 1fde573413b5 ("s390: vfio-ap: base implementation of VFIO AP device driver") Cc: stable@vger.kernel.org Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-22clk: x86: Move clk-lpss.h to platform_data/x86Andy Shevchenko
clk-lpss.h is solely x86 related header. Move it to correct folder. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: fractional-divider: check parent rate only if flag is setKatsuhiro Suzuki
Custom approximation of fractional-divider may not need parent clock rate checking. For example Rockchip SoCs work fine using grand parent clock rate even if target rate is greater than parent. This patch checks parent clock rate only if CLK_SET_RATE_PARENT flag is set. For detailed example, clock tree of Rockchip I2S audio hardware. - Clock rate of CPLL is 1.2GHz, GPLL is 491.52MHz. - i2s1_div is integer divider can divide N (N is 1~128). Input clock is CPLL or GPLL. Initial divider value is N = 1. Ex) PLL = CPLL, N = 10, i2s1_div output rate is CPLL / 10 = 1.2GHz / 10 = 120MHz - i2s1_frac is fractional divider can divide input to x/y, x and y are 16bit integer. CPLL --> | selector | ---> i2s1_div -+--> | selector | --> I2S1 MCLK GPLL --> | | ,--------------' | | `--> i2s1_frac ---> | | Clock mux system try to choose suitable one from i2s1_div and i2s1_frac for master clock (MCLK) of I2S1. Bad scenario as follows: - Try to set MCLK to 8.192MHz (32kHz audio replay) Candidate setting is - i2s1_div: GPLL / 60 = 8.192MHz i2s1_div candidate is exactly same as target clock rate, so mux choose this clock source. i2s1_div output rate is changed 491.52MHz -> 8.192MHz - After that try to set to 11.2896MHz (44.1kHz audio replay) Candidate settings are - i2s1_div : CPLL / 107 = 11.214945MHz - i2s1_frac: i2s1_div = 8.192MHz This is because clk_fd_round_rate() thinks target rate (11.2896MHz) is higher than parent rate (i2s1_div = 8.192MHz) and returns parent clock rate. Above is current upstreamed behavior. Clock mux system choose i2s1_div, but this clock rate is not acceptable for I2S driver, so users cannot replay audio. Expected behavior is: - Try to set master clock to 11.2896MHz (44.1kHz audio replay) Candidate settings are - i2s1_div : CPLL / 107 = 11.214945MHz - i2s1_frac: i2s1_div * 147/6400 = 11.2896MHz Change i2s1_div to GPLL / 1 = 491.52MHz at same time. If apply this commit, clk_fd_round_rate() calls custom approximate function of Rockchip even if target rate is higher than parent. Custom function changes both grand parent (i2s1_div) and parent (i2s_frac) settings at same time. Clock mux system can choose i2s1_frac and audio works fine. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Reviewed-by: Heiko Stuebner <heiko@sntech.de> [sboyd@kernel.org: Make function into a macro instead] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: qcom: Make common clk_hw registrationsJeffrey Hugo
Several clock controller drivers define a list of clk_hw devices, and then register those devices in probe() before using common code to process the rest of initialization. Extend the common code to accept a list of clk_hw devices to process, thus eliminating many duplicate implementations. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Suggested-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: actions: Add clock driver for S500 SoCManivannan Sadhasivam
Add common clock driver for Actions Semi S500 SoC. Signed-off-by: Edgar Bernardi Righi <edgar.righi@lsitec.org.br> [Mani: cleaned up the driver] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: actions: Add configurable PLL delayManivannan Sadhasivam
S500 SoC requires configurable delay for different PLLs. Hence, add a separate macro for declaring a PLL with configurable delay and also modify the existing OWL_PLL_NO_PARENT macro to use default delay so that no need to modify the existing S700/S900 drivers. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22habanalabs: use GFP_ATOMIC under spin lockWei Yongjun
A spin lock is taken here so we should use GFP_ATOMIC. Fixes: 0feaf86d4e69 ("habanalabs: add virtual memory and MMU modules") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-22Merge branch 'drm-next-5.1' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Fixes for 5.1: amdgpu: - Fix missing fw declaration after dropping old CI DPM code - Fix debugfs access to registers beyond the MMIO bar size - Fix context priority handling - Add missing license on some new files - Various cleanups and bug fixes radeon: - Fix missing break in CS parser for evergreen - Various cleanups and bug fixes sched: - Fix entities with 0 run queues Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190221214134.3308-1-alexander.deucher@amd.com
2019-02-21rocker: Add missing break for PRE_BRIDGE_FLAGSFlorian Fainelli
A missing break keyword should have been added after adding support for PRE_BRIDGE_FLAGS. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 93700458ff63 ("rocker: Check Handle PORT_PRE_BRIDGE_FLAGS") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22crypto: ccp - Update driver messages to remove some confusionLendacky, Thomas
The current content of some of the driver messages and the way that they are issued results in some confusion, especially in the area of the PSP as it relates to SEV support. If SEV is not supported, a message is issued that says "psp initialization failed." This makes it seem like there was a problem, when in fact, the PSP support is just disabled if SEV is not supported. Update the driver to check SEV support a bit earlier and issue a debug- level message if SEV is not supported, followed by a debug-level message that the PSP is disabled. This way you will only see PSP messages if SEV is supported or if debug information is desired. Also, remove the overall "enabled" and "disabled" messages for the driver and rely on the CCP and PSP support to issue component-specific messages. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-22crypto: rockchip - update new iv to device in multiple operationsZhang Zhijie
For chain mode in cipher(eg. AES-CBC/DES-CBC), the iv is continuously updated in the operation. The new iv value should be written to device register by software. Reported-by: Eric Biggers <ebiggers@google.com> Fixes: 433cd2c617bf ("crypto: rockchip - add crypto driver for rk3288") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Zhang Zhijie <zhangzj@rock-chips.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-22crypto: rockchip - fix scatterlist nents errorZhang Zhijie
In some cases, the nents of src scatterlist is different from dst scatterlist. So two variables are used to handle the nents of src&dst scatterlist. Reported-by: Eric Biggers <ebiggers@google.com> Fixes: 433cd2c617bf ("crypto: rockchip - add crypto driver for rk3288") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Zhang Zhijie <zhangzj@rock-chips.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-22crypto: ccree - fix missing break in switch statementGustavo A. R. Silva
Add missing break statement in order to prevent the code from falling through to case S_DIN_to_DES. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: 63ee04c8b491 ("crypto: ccree - add skcipher support") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-22crypto: caam/qi2 - relax busy polling while enqueuing FDsHoria Geantă
Add cpu_relax() in the loop that tries to enqueue the FDs. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-22crypto: caam/qi2 - rate-limit enqueue failure printsHoria Geantă
Avoid console being flooded with prints in case HW is too busy to accept new enqueue requests. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-22crypto: caam/qi2 - use affine DPIOsHoria Geantă
Driver was relying on an older DPIO API, which provided a CPU-affine DPIO in case it was called with preemption disabled. Since this is no longer the case, save the CPU-affine DPIO in per-cpu private structure during setup and further use it on the hot path. Note that preemption is no longer disabled while trying to enqueue an FD. Thus it might be possible to run the enqueue on a different CPU (due to migration, when in process context), however this wouldn't be a functionality issue. Since we allow for all cores to enqueue, we take care of data structures setup to handle the case when number of (Rx, Tx) queue pairs is smaller than number of cores. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-22crypto: chtls - remove cdev_list_lockSebastian Andrzej Siewior
Last user of cdev_list_lock was removed in commit 6422ccc5fbefb ("crypto/chelsio/chtls: listen fails with multiadapt") Cc: Atul Gupta <atul.gupta@chelsio.com> Cc: Harsh Jain <harsh@chelsio.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux nextHerbert Xu
Pull changes from Freescale SoC drivers tree that are required by subsequent caam/qi2 patches.
2019-02-22crypto: ccree - add missing inline qualifierGilad Ben-Yossef
Commit 1358c13a48c4 ("crypto: ccree - fix resume race condition on init") was missing a "inline" qualifier for stub function used when CONFIG_PM is not set causing a build warning. Fixes: 1358c13a48c4 ("crypto: ccree - fix resume race condition on init") Cc: stable@kernel.org # v4.20 Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-21net: hns3: clear command queue's registers when unloading VF driverHuazhong Tan
According to the hardware's description, the driver should clear the command queue's registers when uloading VF driver. Otherwise, these existing value may lead the IMP get into a wrong state. Fixes: fedd0c15d288 ("net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: uninitialize command queue while unloading PF driverHuazhong Tan
According to the hardware's description, the driver should clear the command queue's registers when uloading driver. Otherwise, these existing value may lead the IMP get into a wrong state. Also this patch adds hclge_cmd_uninit() to do the command queue uninitialization which includes clearing registers and freeing memory. Fixes: 68c0a5c70614 ("net: hns3: Add HNS3 IMP(Integrated Mgmt Proc) Cmd Interface Support") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: Record VF vlan tablesliuzhongzhu
Record the vlan tables that the VF sends to the chip. After the VF exception, the PF actively clears the VF to chip config. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: Record VF unicast and multicast tablesliuzhongzhu
Record the unicast and multicast tables that the VF sends to the chip. After the VF exception, the PF actively clears the VF to chip config. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: fix 6th bit of ppp mpf abnormal errorsWeihang Li
This patch modify print message of 6th bit of ppp mpf abnormal errors, there is a extra letter e in it. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: enable 8~11th bit of mac common msi-x errorWeihang Li
These bits are enabled now and have been test. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: some bugfix of ppu(rcb) ras errorsWeihang Li
The 3rd and 4th of PPU(RCB) PF Abnormal is RAS errors instead of MSI-X like other bits. This patch adds process of handling and logging this two bits. Otherwise, this patch modifies print message of 28th and 29th bit of PPU MPF Abnormal errors, which keep same with other errors now. Fixes: f69b10b317f9 ("net: hns3: handle hw errors of PPU(RCB)") Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: modify print message of ssu common ecc errorsWeihang Li
This patch add information of specific bit in log to be consistent with other type of errors, so that we can know which memory of ssu has occurred a ecc ras errors. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: fix port info query issue for copper portJian Shen
In original codes, for copper port which doesn't connect to phy, it always returns -EOPNOTSUPP when query port information. This patch fixes it by return the port information of MAC. Fixes: 5f373b158523 ("net: hns3: Fix speed/duplex information loss problem when executing ethtool ethx cmd of VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: convert mac advertize and supported from u32 to link modeJian Shen
The link mode with bits has been up to more than 31 for some MAC and phy. Convert to using a linkmode bitmap, which can support all link modes. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: Check variable is valid before assigning it to anotherYonglong Liu
In hnae3_register_ae_dev(), ae_algo->ops is assigned to ae_dev->ops before check that ae_algo->ops is valid. And in hnae3_register_ae_algo(), missing check for ae_algo->ops. This patch fixes them. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: add pointer checking at the beginning of the exported functions.Yonglong Liu
These functions are exported, add pointer checking at the beginning can make them more safe. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Reject overlarge headroom size requestsPetr Machata
cap_max_headroom_size holds maximum headroom size supported. Overstepping that limit might under certain conditions lead to ASIC freeze. Query and store the value, and add mlxsw_sp_sb_max_headroom_cells() for obtaining the stored value. In __mlxsw_sp_port_headroom_set(), reject requests where the total port buffer is larger than the advertised maximum. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Update port headroom configurationPetr Machata
The recommendation for headroom size for 100Gbps port and 100m cable is 101.6KB, reduced accordingly for split ports. The closest higher number evenly divisible by cell size for both Spectrum-1 and Spectrum-2, and such that the number of cells can be further divided by maximum split factor of 4, is 102528 bytes, or 25632 bytes per lane. Update mlxsw_sp_port_pb_init() to compute the headroom taking into account this recommended per-lane value and number of lanes actually dedicated to a given port. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Add Spectrum-2 shared buffer configurationPetr Machata
Customize the tables related to shared buffer configuration to match the current recommendation for Spectrum-2 systems. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Keep mlxsw_sp_sb_mm in sb_valsPetr Machata
The SBMM register configures the shared buffer quota for MC packets according to Switch-Priority. The default configuration depends on the chip type. Therefore keep the table and length in struct mlxsw_sp_sb_vals. Redirect the references from the global definitions to the fields. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Keep mlxsw_sp_sb_cm in sb_valsPetr Machata
The SBCM register configures shared buffer quota according to port-priority resp. port-TC. The default configuration depends on the chip type. Therefore keep the tables and their lengths in struct mlxsw_sp_sb_vals. Redirect the references from the global definitions to the fields. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Keep mlxsw_sp_sb_prs in mlxsw_sp_sb_valsPetr Machata
The SBPR register configures shared buffer pools. The default configuration depends on the chip type. Therefore keep it in struct mlxsw_sp_sb_vals. Redirect the one reference from the global array to the field. Because the pool descriptor ID is implicit in the ordering of array members, both this array and the pool descriptor array have the same length. Therefore reuse mlxsw_sp_sb.pool_dess_len for the purpose of determining the length of SBPR array. Drop the now useless MLXSW_SP_SB_PRS_LEN. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Keep mlxsw_sp_sb_pms in mlxsw_sp_sb_valsPetr Machata
The SBPM register can be used to configure quotas for packets ingressing from a certain pool to a certain port, and egressing from a certain pool to a certain port. The default configuration depends on the chip type. Therefore keep it in struct mlxsw_sp_sb_vals. Redirect the one reference from the global array to the field. Because the pool descriptor ID is implicit in the ordering of array members, both this array and the pool descriptor array have the same length. Therefore reuse mlxsw_sp_sb.pool_dess_len for the purpose of determining the length of SBPM array. Drop the now useless MLXSW_SP_SB_PMS_LEN. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-19 12:24:47 +0000