| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID subsystem fixes from Jiri Kosina:
- buffer management size fix for i2c-hid driver, from Adrian Salido
- tool ID regression fixes for Wacom driver from Jason Gerecke
- a few small assorted fixes and a few device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
Revert "HID: multitouch: Support ALPS PTP stick with pid 0x120A"
HID: hidraw: fix power sequence when closing device
HID: wacom: Always increment hdev refcount within wacom_get_hdev_data
HID: wacom: generic: Clear ABS_MISC when tool leaves proximity
HID: wacom: generic: Send MSC_SERIAL and ABS_MISC when leaving prox
HID: i2c-hid: allocate hid buffers for real worst case
HID: rmi: Make sure the HID device is opened on resume
HID: multitouch: Support ALPS PTP stick with pid 0x120A
HID: multitouch: support buttons and trackpoint on Lenovo X1 Tab Gen2
HID: wacom: Correct coordinate system of touchring and pen twist
HID: wacom: Properly report negative values from Intuos Pro 2 Bluetooth
HID: multitouch: Fix system-control buttons not working
HID: add multi-input quirk for IDC6680 touchscreen
HID: wacom: leds: Don't try to control the EKR's read-only LEDs
HID: wacom: bits shifted too much for 9th and 10th buttons
|
|
Pull NVMe fixes from Christoph:
"A trivial one-liner from Martin to fix the visible of the uuid attr,
and another one (originally from Abhishek Shah, rewritten by me) to fix
the CMB addresses passed back to the controller in case of a system that
remaps BAR addresses between host and device."
|
|
Pull networking fixes from David Miller:
1) Check iwlwifi 9000 reorder buffer out-of-space condition properly,
from Sara Sharon.
2) Fix RCU splat in qualcomm rmnet driver, from Subash Abhinov
Kasiviswanathan.
3) Fix session and tunnel release races in l2tp, from Guillaume Nault
and Sabrina Dubroca.
4) Fix endian bug in sctp_diag_dump(), from Dan Carpenter.
5) Several mlx5 driver fixes from the Mellanox folks (max flow counters
cap check, invalid memory access in IPoIB support, etc.)
6) tun_get_user() should bail if skb->len is zero, from Alexander
Potapenko.
7) Fix RCU lookups in inetpeer, from Eric Dumazet.
8) Fix locking in packet_do_bund().
9) Handle cb->start() error properly in netlink dump code, from Jason
A. Donenfeld.
10) Handle multicast properly in UDP socket early demux code. From Paolo
Abeni.
11) Several erspan bug fixes in ip_gre, from Xin Long.
12) Fix use-after-free in socket filter code, in order to handle the
fact that listener lock is no longer taken during the three-way TCP
handshake. From Eric Dumazet.
13) Fix infoleak in RTM_GETSTATS, from Nikolay Aleksandrov.
14) Fix tail call generation in x86-64 BPF JIT, from Alexei Starovoitov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits)
net: 8021q: skip packets if the vlan is down
bpf: fix bpf_tail_call() x64 JIT
net: stmmac: dwmac-rk: Add RK3128 GMAC support
rndis_host: support Novatel Verizon USB730L
net: rtnetlink: fix info leak in RTM_GETSTATS call
socket, bpf: fix possible use after free
mlxsw: spectrum_router: Track RIF of IPIP next hops
mlxsw: spectrum_router: Move VRF refcounting
net: hns3: Fix an error handling path in 'hclge_rss_init_hw()'
net: mvpp2: Fix clock resource by adding an optional bus clock
r8152: add Linksys USB3GIGV1 id
l2tp: fix l2tp_eth module loading
ip_gre: erspan device should keep dst
ip_gre: set tunnel hlen properly in erspan_tunnel_init
ip_gre: check packet length and mtu correctly in erspan_xmit
ip_gre: get key from session_id correctly in erspan_rcv
tipc: use only positive error codes in messages
ppp: fix __percpu annotation
udp: perform source validation for mcast early demux
IPv4: early demux can return an error code
...
|
|
The structure stm32f7_setup is local to the source and does not need
to be in global scope, make it static const.
Cleans up sparse warning:
symbol 'stm32f7_setup' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Make sure (of/i2c/platform)_device_id tables are NULL terminated.
Found by coccinelle spatch "misc/of_table.cocci"
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Add PCI ID for Intel Cedar Fork PCH.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
I2C drive setup structure is not properly allocated.
Make it static instead of pointer to store driver data.
Fixes: aeb068c5721485 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
parse_cec_param() compares a string with "cec_disable" using only 7
characters of the 11-character-long string.
The proper solution for this would be:
#define CEC_DISABLE "cec_disable"
strncmp(str, CEC_DISABLE, strlen(CEC_DISABLE))
but when comparing a string against a string constant strncmp() has no
advantage over strcmp() because the comparison is guaranteed to be bound by
the string constant. So just replace str strncmp() with strcmp().
[ tglx: Made it use strcmp and updated the changelog ]
Fixes: 011d82611172 ("RAS: Add a Corrected Errors Collector")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170903075440.30250-1-nicolas.iooss_linux@m4x.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Our first batch of fixes this release cycle, unfortunately a bit
noisier than usual. Two major groups stand out:
- Some pinctril dts/dtsi changes for stm32 due to a new driver being
merged during the merge window, and this aligns the DT contents
between the old format and the new. This could arguably be moved to
the next merge window but it also seemed relatively harmless to
include now.
- Amlogic/meson had driver changes merged that required devicetree
changes to avoid functional/performance regressions. I've already
asked them to be more careful about this going forward, and making
sure drivers are compatible with older DTs when they make these
kind of changes. The platform is actively being upstreamed so
there's a few things in flight, we've seen this happen before and
sometimes it's hard to catch in time.
Besides that there is the usual mix of minor fixes"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits)
ARM: dts: stm32: use right pinctrl compatible for stm32f469
ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board
ARM: defconfig: update Gemini defconfig
ARM: defconfig: FRAMEBUFFER_CONSOLE can no longer be =m
arm64: dts: rockchip: add the grf clk for dw-mipi-dsi on rk3399
reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TEST
ARM: dts: da850-evm: add serial and ethernet aliases
ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry
ARM: dts: am33xx: Add spi alias to match SOC schematics
ARM: OMAP2+: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both
ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux
ARM: OMAP2+: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
ARM: dts: nokia n900: drop unneeded/undocumented parts of the dts
arm64: dts: rockchip: Correct MIPI DPHY PLL clock on rk3399
arm64: dt marvell: Fix AP806 system controller size
MAINTAINERS: add Macchiatobin maintainers entry
ARC: reset: remove the misleading v1 suffix all over
ARC: reset: add missing DT binding documentation for HSDKv1 reset driver
ARC: reset: Only build on archs that have IOMEM
ARM: at91: Replace uses of virt_to_phys with __pa_symbol
...
|
|
Update my imgtec.com and personal email address to my kernel.org one in
a few places as MIPS will soon no longer be part of Imagination
Technologies, and add mappings in .mailcap so get_maintainer.pl reports
the right address.
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
According to BSpec GLK like BXT needs to ignore the idle state of cores
before starting the DMC firmware's DC state handler.
Fixes: dbb28b5c3d3c ("drm/i915/DMC/GLK: Load DMC on GLK")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-2-imre.deak@intel.com
(cherry picked from commit b7208a3f3e52791571df064fb96025ad48edd1bf)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The DMC firmware program memory is lost after S3/S4 system suspend, so
we need to reprogram it during resume.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103070
Fixes: cebfcead63de ("drm/i915/DMC/CNL: Load DMC on CNL")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-1-imre.deak@intel.com
(cherry picked from commit 57522c4c87de20d8f7ad4e142a3a4334066d55ff)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Port number 0 is an invalid port number. Set it to 1
as there is one port per i40iw device.
Fixes: d37498417947 ("i40iw: add files for iwarp interface")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Remove duplicate set_64bit_val call to offset 24.
Replace some instances of set_64bit_val with
i40iw_insert_wqe_hdr as valid bit needs a write
barrier and should be the last write operation for the WQE.
Fixes: 786c6adb3a94 ("i40iw: add puda code")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Parse the vlan priority from the vlan tag and configure it to the
WC's sl field.
Fixes: abd49676c707 ("qed: Add RoCE ll2 & GSI support")
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Rename vlan_id field name to vlan as it contains more than the vlan_id.
Mask out non vlan id fields from vlan tag of the QED LL2 RX GSI
vlan output. As it is expected to be vlan id only.
Ignore vlan_id with value of zero.
Fixes: abd49676c707 ("qed: Add RoCE ll2 & GSI support")
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When UAR get_page fails, it needs to continue to cleanup debugfs for
congestion control parameters. Labels for error path were incorrectly
ordered.
This patch fixes to do correct cleanup on debugfs init failure and uar
get page failure.
Fixes: 4a2da0b8c078 ("IB/mlx5: Add debug control parameters for congestion control")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
commit f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing
workarounds") removed kernel code that was allowing to initialize
and probe the SMMU devices early (ie earlier than PCI devices, through
linker script callback entries) in the boot process because it was not
needed any longer in that the SMMU devices/drivers now support deferred
probing.
Since the SMMUs probe routines are also in charge of requesting global
PCI ACS kernel enablement, commit f6810c15cf97 ("iommu/arm-smmu: Clean
up early-probing workarounds") also postponed PCI ACS enablement to
SMMUs devices probe time, which is too late given that PCI devices needs
to detect if PCI ACS is enabled to init the respective capability
through the following call path:
pci_device_add()
-> pci_init_capabilities()
-> pci_enable_acs()
Add code in the ACPI IORT SMMU platform devices initialization path
(that is called before ACPI PCI enumeration) to detect if there
exists firmware mappings to map root complexes ids to SMMU ids
and if so enable ACS for the system.
Fixes: f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Commit 6edfa11cb396 ("clk: samsung: Add enable/disable operation for
PLL36XX clocks") added enable/disable operations to PLL clocks. Prior that
VPLL and EPPL clocks were always enabled because the enable bit was never
touched. Those clocks have to be enabled during suspend/resume cycle,
because otherwise board fails to enter sleep mode. This patch enables them
unconditionally before entering system suspend state. System restore
function will set them to the previous state saved in the register cache
done before that unconditional enable.
Fixes: 6edfa11cb396 ("clk: samsung: Add enable/disable operation for PLL36XX clocks")
CC: stable@vger.kernel.org # v4.13
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
If a crypt mapping uses optional sector_size feature, additional
restrictions to mapped device segment size must be applied in
constructor, otherwise the device activation will fail later.
Fixes: 8f0009a225 ("dm crypt: optionally support larger encryption sector size")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The bit offset used to check if DCDC5 and DCDC6 are tied together in
poly-phase output is wrong. It was checking against a reserved bit,
which is always false.
In reality, neither the reference design layout nor actually produced
boards tie these two buck regulators together. But we should still
fix it, just in case.
Fixes: 1dbe0ccb0631 ("regulator: axp20x-regulator: add support for AXP803")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, NVMe PCI host driver is programming CMB dma address as
I/O SQs addresses. This results in failures on systems where 1:1
outbound mapping is not used (example Broadcom iProc SOCs) because
CMB BAR will be progammed with PCI bus address but NVMe PCI EP will
try to access CMB using dma address.
To have CMB working on systems without 1:1 outbound mapping, we
program PCI bus address for I/O SQs instead of dma address. This
approach will work on systems with/without 1:1 outbound mapping.
Based on a report and previous patch from Abhishek Shah.
Fixes: 8ffaadf7 ("NVMe: Use CMB for the IO SQes if available")
Cc: stable@vger.kernel.org
Reported-by: Abhishek Shah <abhishek.shah@broadcom.com>
Tested-by: Abhishek Shah <abhishek.shah@broadcom.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
User-space normally keeps the node alive when creating a transaction
since it has a reference to the target. The local strong ref keeps it
alive if the sending process dies before the target process processes
the transaction. If the source process is malicious or has a reference
counting bug, this can fail.
In this case, when we attempt to decrement the node in the failure
path, the node has already been freed.
This is fixed by taking a tmpref on the node while constructing
the transaction. To avoid re-acquiring the node lock and inner
proc lock to increment the proc's tmpref, a helper is used that
does the ref increments on both the node and proc.
Signed-off-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch addresses the following bugs in the current rescind handling code:
1. Fixes a race condition where we may be invoking hv_process_channel_removal()
on an already freed channel.
2. Prevents indefinite wait when rescinding sub-channels by correctly setting
the probe_complete state.
I would like to thank Dexuan for patiently reviewing earlier versions of this
patch and identifying many of the issues fixed here.
Greg, please apply this to 4.14-final.
Fixes: '54a66265d675 ("Drivers: hv: vmbus: Fix rescind handling")'
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Cc: stable@vger.kernel.org # (4.13 and above)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add Gemini Lake (GLK) device id.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes a regression caused by the new changes
in the "run wake" handlers.
The mei devices that support D0i3 are no longer receiving an interrupt
after entering runtime suspend state and will stall.
pci_dev_run_wake function now returns "true" for some devices
(including mei) for which it used to return "false",
arguably incorrectly as "run wake" used to mean that
wakeup signals can be generated for a device in
the working state of the system, so it could not be enabled
or disabled before too.
MEI maps runtime suspend/resume to its own defined
power gating (PG) states, (D0i3 or other depending on generation),
hence we need to go around the native PCI runtime service which
eventually brings the device into D3cold/hot state,
but the mei devices cannot wake up from D3 unlike from D0i3/PG state,
which keeps irq running.
To get around PCI device native runtime pm,
MEI uses runtime pm domain handlers which take precedence.
Cc: <stable@vger.kernel.org> #4.13+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock
is optional because not all the SoCs need them but at least for Armada
7K/8K it is actually mandatory.
The binding documentation is updating accordingly.
Without this patch the kernel hand during boot if the mvpp2.2 network
driver was not present in the kernel. Indeed the clock needed by the
xenon controller was set by the network driver.
Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core
functionality)"
CC: Stable <stable@vger.kernel.org>
Tested-by: Zhoujie Wu <zjwu@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
It has been reported that some platforms (odroid-c2) may require
a different tx phase setting to operate at high speed (hs200 and hs400)
To improve the situation, this patch includes tx phase in the tuning
process.
Fixes: d341ca88eead ("mmc: meson-gx: rework tuning function")
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Resetting the phase when POWER_ON is set the set_ios() call means that the
phase is reset almost every time the set_ios() is called, while the
expected behavior was to reset the phase on a power cycle.
This had gone unnoticed until now because in all mode (except hs400) the
tuning is done after the last to set_ios(). In such case, the tuning
result is used anyway. In HS400, there are a few calls to set_ios() after
the tuning is done, overwriting the tuning result.
Resetting the phase on POWER_UP instead of POWER_ON solve the problem.
Fixes: d341ca88eead ("mmc: meson-gx: rework tuning function")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Using CLK_DIVIDER_ROUND_CLOSEST is unsafe as the mmc clock could be
rounded to a rate higher the specified rate. Removing this flag ensure
that, if the rate needs to be rounded, it will be rounded down.
Fixes: 51c5d8447bd7 ("MMC: meson: initial support for GX platforms")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The SoCFPGA Stratix10 reset controller has 32-bit registers. Thus, we
cannot use BITS_PER_LONG in computing the register and bit offset. Instead,
we should be using the width of the hardware register for the calculation.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
In may, Steven sent a patch deleting the bounce buffer handling
and the CONFIG_MMC_BLOCK_BOUNCE option.
I chose the less invasive path of making it a runtime config
option, and we merged that successfully for kernel v4.12.
The code is however just standing in the way and taking up
space for seemingly no gain on any systems in wide use today.
Pierre says the code was there to improve speed on TI SDHCI
controllers on certain HP laptops and possibly some Ricoh
controllers as well. Early SDHCI controllers lacked the
scatter-gather feature, which made software bounce buffers
a significant speed boost.
We are clearly talking about the list of SDHCI PCI-based
MMC/SD card readers found in the pci_ids[] list in
drivers/mmc/host/sdhci-pci-core.c.
The TI SDHCI derivative is not supported by the upstream
kernel. This leaves the Ricoh.
What we can however notice is that the x86 defconfigs in the
kernel did not enable CONFIG_MMC_BLOCK_BOUNCE option, which
means that any such laptop would have to have a custom
configured kernel to actually take advantage of this
bounce buffer speed-up. It simply seems like there was
a speed optimization for the Ricoh controllers that noone
was using. (I have not checked the distro defconfigs but
I am pretty sure the situation is the same there.)
Bounce buffers increased performance on the OMAP HSMMC
at one point, and was part of the original submission in
commit a45c6cb81647 ("[ARM] 5369/1: omap mmc: Add new
omap hsmmc controller for 2430 and 34xx, v3")
This optimization was removed in
commit 0ccd76d4c236 ("omap_hsmmc: Implement scatter-gather
emulation")
which found that scatter-gather emulation provided even
better performance.
The same was introduced for SDHCI in
commit 2134a922c6e7 ("sdhci: scatter-gather (ADMA) support")
I am pretty positively convinced that software
scatter-gather emulation will do for any host controller what
the bounce buffers were doing. Essentially, the bounce buffer
was a reimplementation of software scatter-gather-emulation in
the MMC subsystem, and it should be done away with.
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Juha Yrjola <juha.yrjola@solidboot.com>
Cc: Steven J. Hill <Steven.Hill@cavium.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Suggested-by: Steven J. Hill <Steven.Hill@cavium.com>
Suggested-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
into fixes
Reset controller fixes for v4.14
- Remove misleading HSDK v1 suffix, as there is no v2 planned
- Add missing DT binding documentation for HSDK reset driver
- Fix HSDK reset driver dependencies
* tag 'reset-fixes-for-4.14' of git://git.pengutronix.de/git/pza/linux:
reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TEST
ARC: reset: remove the misleading v1 suffix all over
ARC: reset: add missing DT binding documentation for HSDKv1 reset driver
ARC: reset: Only build on archs that have IOMEM
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
In testing I found handle passed to zs_map_object in __zram_bvec_read is
NULL so eh kernel goes oops in pin_object().
The reason is there is no routine to check the slot's freeing after
getting the slot's lock. This patch fixes it.
[minchan@kernel.org: v2]
Link: http://lkml.kernel.org/r/1505887347-10881-1-git-send-email-minchan@kernel.org
Link: http://lkml.kernel.org/r/1505788488-26723-1-git-send-email-minchan@kernel.org
Fixes: 1f7319c74275 ("zram: partial IO refactoring")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Locking of config and doorbell operations should be done only if the
underlying hardware requires it.
This patch removes the global spinlocks from the rapidio subsystem and
moves them to the mport drivers (fsl_rio and tsi721), only to the
necessary places. For example, local config space read and write
operations (lcread/lcwrite) are atomic in all existing drivers, so there
should be no need for locking, while the cread/cwrite operations which
generate maintenance transactions need to be synchronized with a lock.
Later, each driver could chose to use a per-port lock instead of a
global one, or even more granular locking.
Link: http://lkml.kernel.org/r/20170824113023.GD50104@nokia.com
Signed-off-by: Ioan Nicu <ioan.nicu.ext@nokia.com>
Signed-off-by: Frank Kunz <frank.kunz@nokia.com>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Drop the global lru lock in isolate callback before calling
zap_page_range which calls cond_resched, and re-acquire the global lru
lock before returning. Also change return code to LRU_REMOVED_RETRY.
Use mmput_async when fail to acquire mmap sem in an atomic context.
Fix "BUG: sleeping function called from invalid context"
errors when CONFIG_DEBUG_ATOMIC_SLEEP is enabled.
Also restore mmput_async, which was initially introduced in commit
ec8d7c14ea14 ("mm, oom_reaper: do not mmput synchronously from the oom
reaper context"), and was removed in commit 212925802454 ("mm: oom: let
oom_reap_task and exit_mmap run concurrently").
Link: http://lkml.kernel.org/r/20170914182231.90908-1-sherryy@android.com
Fixes: f2517eb76f1f2 ("android: binder: Add global lru shrinker to binder")
Signed-off-by: Sherry Yang <sherryy@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Kyle Yan <kyan@codeaurora.org>
Acked-by: Arve Hjønnevåg <arve@android.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Martijn Coenen <maco@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Riley Andrews <riandrews@android.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hoeun Ryu <hoeun.ryu@gmail.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add constants and callback functions for the dwmac on rk3128 soc.
As can be seen, the base structure is the same, only registers
and the bits in them moved slightly.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A recent commit made null_blk depend on configfs, which is kind of
annoying since you now have to find this dependency and enable that
as well. Discovered this since I no longer had null_blk available
on a box I needed to debug, since it got killed when the config
updated after the configfs change was merged.
Fixes: 3bf2bd20734e ("nullb: add configfs interface")
Reviewed-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Treat the ef/04/01 interface class/subclass/protocol combination used
by the Novatel Verizon USB730L (1410:9030) as a possible RNDIS
interface.
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 17 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 3
P: Vendor=1410 ProdID=9030 Rev=03.10
S: Manufacturer=Novatel Wireless
S: Product=MiFi USB730L
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
I: If#= 2 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
Once the network interface is brought up, the user just needs to run a
DHCP client to get IP address and routing setup.
As a side note, other Novatel Verizon USB730L models with the same
vid:pid end up exposing a standard ECM interface which doesn't require
any other kernel update to make it work.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The common lane power down flag of a DPIO PHY has a funky semantic:
after the initial enabling of the PHY (so from a disabled state) this
flag will be clear. It will be set only after the PHY will be used for
the first time (for instance due to enabling the corresponding pipe) and
then become unused (due to disabling the pipe). During the initial PHY
enablement we don't know which of the above phases we are in, so move
the check for the flag where this is known, the HW readout code. This is
where the rest of lane power down status checks are done anyway.
This fixes at least a problem on GLK where after module reloading, the
common lane power down flag of PHY1 is set, but the PHY is actually
powered-on and properly set up. The GRC readout code for other PHYs will
hence think that PHY1 is not powered initially and disable it after the
GRC readout. This will cause the AUX power well related to PHY1 to get
disabled in a stuck state, timing out when we try to enable it later.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Fixes: e93da0a0137b ("drm/i915/bxt: Sanitiy check the PHY lane power down status")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102777
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171002135307.26117-1-imre.deak@intel.com
(cherry picked from commit e19c1eb885ac4186e64c7e484424124f3145318e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We used to assign IRQs for all devices at boot-time, before any drivers
claimed devices. The following commits:
30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
changed this so we now call pci_assign_irq() from pci_device_probe() when
we call a driver's probe method.
The ide_scan_pcibus() path (enabled by CONFIG_IDEPCI_PCIBUS_ORDER) bypasses
pci_device_probe() so it can guarantee devices are claimed in order of PCI
bus address. It calls the driver's probe method directly, so it misses the
pci_assign_irq() call (and other PCI initialization functions), which
causes failures like this:
ide0: disabled, no IRQ
ide0: failed to initialize IDE interface
ide0: disabling port
cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057]
cmd64x 0000:00:02.0: can't reserve resources
CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
ide_generic: please use "probe_mask=0x3f" module parameter for probing
all legacy ISA IDE ports
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0
sysfs: cannot create duplicate filename '/class/ide_port/ide0'
...
Trace:
[<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
[<fffffc0000330928>] warn_slowpath_fmt+0x58/0x70
[<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
[<fffffc0000486d40>] kernfs_path_from_node+0x30/0x60
[<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
[<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
[<fffffc000048d010>] sysfs_do_create_link_sd.isra.2+0x100/0x120
[<fffffc00005b9d64>] device_add+0x2a4/0x7c0
[<fffffc00005ba5cc>] device_create_groups_vargs+0x14c/0x170
[<fffffc00005ba518>] device_create_groups_vargs+0x98/0x170
[<fffffc00005ba690>] device_create+0x50/0x70
[<fffffc00005df36c>] ide_host_register+0x48c/0xa00
[<fffffc00005df330>] ide_host_register+0x450/0xa00
[<fffffc00005ba2a0>] device_register+0x20/0x50
[<fffffc00005df330>] ide_host_register+0x450/0xa00
[<fffffc00005df944>] ide_host_add+0x64/0xe0
[<fffffc000079b41c>] kobject_uevent_env+0x16c/0x710
[<fffffc0000310288>] do_one_initcall+0x68/0x260
[<fffffc00007b13bc>] kernel_init+0x1c/0x1a0
...
---[ end trace 24a70433c3e4d374 ]---
ide0: disabling port
Fix the IRQ allocation issue by calling pci_assign_irq() from
ide_scan_pcidev() before probing the IDE PCI drivers, so that IRQs for a
given PCI device are allocated for the IDE PCI drivers to use them for
device configuration.
Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
|
|
Recent pci_assign_irq() changes uncovered a problem with missing freeing of
PCI BARs on PCI IDE host initialization failure:
ide0: disabled, no IRQ
ide0: failed to initialize IDE interface
ide0: disabling port
cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057]
cmd64x 0000:00:02.0: can't reserve resources
CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
Fix the problem by adding missing freeing of PCI BARs to
ide_setup_pci_controller() and ide_pci_init_two().
Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[bhelgaas: add Fixes:]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
|
|
Recent pci_assign_irq() changes uncovered a problem with missing freeing of
ide_port class instance on hwif_init() failure in ide_host_register():
ide0: disabled, no IRQ
ide0: failed to initialize IDE interface
ide0: disabling port
cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057]
cmd64x 0000:00:02.0: can't reserve resources
CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0
sysfs: cannot create duplicate filename '/class/ide_port/ide0'
...
Trace:
[<fffffc00003308a0>] __warn+0x160/0x190
[<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
[<fffffc0000330928>] warn_slowpath_fmt+0x58/0x70
[<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
[<fffffc0000486d40>] kernfs_path_from_node+0x30/0x60
[<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
[<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
[<fffffc000048d010>] sysfs_do_create_link_sd.isra.2+0x100/0x120
[<fffffc00005b9d64>] device_add+0x2a4/0x7c0
[<fffffc00005ba5cc>] device_create_groups_vargs+0x14c/0x170
[<fffffc00005ba518>] device_create_groups_vargs+0x98/0x170
[<fffffc00005ba690>] device_create+0x50/0x70
[<fffffc00005df36c>] ide_host_register+0x48c/0xa00
[<fffffc00005df330>] ide_host_register+0x450/0xa00
[<fffffc00005ba2a0>] device_register+0x20/0x50
[<fffffc00005df330>] ide_host_register+0x450/0xa00
[<fffffc00005df944>] ide_host_add+0x64/0xe0
[<fffffc000079b41c>] kobject_uevent_env+0x16c/0x710
[<fffffc0000310288>] do_one_initcall+0x68/0x260
[<fffffc00007b13bc>] kernel_init+0x1c/0x1a0
[<fffffc00007b13a0>] kernel_init+0x0/0x1a0
[<fffffc0000311868>] ret_from_kernel_thread+0x18/0x20
[<fffffc00007b13a0>] kernel_init+0x0/0x1a0
---[ end trace 24a70433c3e4d374 ]---
ide0: disabling port
Fix the problem by adding missing code to ide_host_register().
Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[bhelgaas: add Fixes:]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"Nothing too interesting.
Arnd's gcc-7 warning fixes that slipped through the cracks for two
release cycles (my bad), and two minor low level driver updates"
* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: don't ignore result code of ahci_reset_controller()
ata_piix: Add Fujitsu-Siemens Lifebook S6120 to short cable IDs
ata: avoid gcc-7 warning in ata_timing_quantize
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for 4.14-rc4 to resolved reported
issues.
There's a bunch of stuff in here based on the great work Andrey
Konovalov is doing in fuzzing the USB stack. Lots of bug fixes when
dealing with corrupted USB descriptors that we've never seen in
"normal" operation, but is now ensuring the stack is much more
hardened overall.
There's also the usual XHCI and gadget driver fixes as well, and a
build error fix, and a few other minor things, full details in the
shortlog.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (38 commits)
usb: dwc3: of-simple: Add compatible for Spreadtrum SC9860 platform
usb: gadget: udc: atmel: set vbus irqflags explicitly
usb: gadget: ffs: handle I/O completion in-order
usb: renesas_usbhs: fix usbhsf_fifo_clear() for RX direction
usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipe
usb: gadget: udc: renesas_usb3: Fix return value of usb3_write_pipe()
usb: gadget: udc: renesas_usb3: fix Pn_RAMMAP.Pn_MPKT value
usb: gadget: udc: renesas_usb3: fix for no-data control transfer
USB: dummy-hcd: Fix erroneous synchronization change
USB: dummy-hcd: fix infinite-loop resubmission bug
USB: dummy-hcd: fix connection failures (wrong speed)
USB: cdc-wdm: ignore -EPIPE from GetEncapsulatedResponse
USB: devio: Don't corrupt user memory
USB: devio: Prevent integer overflow in proc_do_submiturb()
USB: g_mass_storage: Fix deadlock when driver is unbound
USB: gadgetfs: Fix crash caused by inadequate synchronization
USB: gadgetfs: fix copy_to_user while holding spinlock
USB: uas: fix bug in handling of alternate settings
usb-storage: unusual_devs entry to fix write-access regression for Seagate external drives
usb-storage: fix bogus hardware error messages for ATA pass-thru devices
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are a small number (5) of patches for some reported TTY and
serial issues. Nothing major, a documentation update, timing fix,
error handling fix, name reporting fix, and a timeout issue resolved.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sccnxp: Fix error handling in sccnxp_probe()
tty: serial: lpuart: avoid report NULL interrupt
serial: bcm63xx: fix timing issue.
mxser: fix timeout calculation for low rates
serial: sh-sci: document R8A77970 bindings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are some small staging/IIO driver fixes for 4.14-rc4
Most of these have been in my tree for a while due to travels, sorry
for the delay. They resolve a number of small issues reported by
people, mostly for the iio drivers. Nothing major in here, full
details are in the shortlog.
All have been linux-next for a few weeks with no reported issues"
* tag 'staging-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
staging: iio: ad7192: Fix - use the dedicated reset function avoiding dma from stack.
iio: core: Return error for failed read_reg
iio: ad7793: Fix the serial interface reset
iio: ad_sigma_delta: Implement a dedicated reset function
IIO: BME280: Updates to Humidity readings need ctrl_reg write!
iio: adc: mcp320x: Fix readout of negative voltages
iio: adc: mcp320x: Fix oops on module unload
iio: adc: stm32: fix bad error check on max_channels
iio: trigger: stm32-timer: fix a corner case to write preset
iio: trigger: stm32-timer: preset shouldn't be buffered
iio: adc: twl4030: Return an error if we can not enable the vusb3v1 regulator in 'twl4030_madc_probe()'
iio: adc: twl4030: Disable the vusb3v1 rugulator in the error handling path of 'twl4030_madc_probe()'
iio: adc: twl4030: Fix an error handling path in 'twl4030_madc_probe()'
staging: rtl8723bs: avoid null pointer dereference on pmlmepriv
staging: rtl8723bs: add missing range check on id
staging: vchiq_2835_arm: Fix NULL ptr dereference in free_pagelist
staging: speakup: fix speakup-r empty line lockup
staging: pi433: Move limit check to switch default to kill warning
staging: r8822be: fix null pointer dereferences with a null driver_adapter
staging: mt29f_spinand: Enable the read ECC before program the page
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are a few small fixes for 4.14-rc4.
The removal of DRIVER_ATTR() was almost completed by 4.14-rc1, but one
straggler made it in through some other tree (odds are, one of
mine...) So there's a simple removal of the last user, and then
finally the macro is removed from the tree.
There's a fix for old crazy udev instances that insist on reloading a
module when it is removed from the kernel due to the new uevents for
bind/unbind. This fixes the reported regression, hopefully some year
in the future we can drop the workaround, once users update to the
latest version, but I'm not holding my breath.
And then there's a build fix for a linker warning, and a buffer
overflow fix to match the PCI fixes you took through the PCI tree in
the same area.
All of these have been in linux-next for a few weeks while I've been
traveling, sorry for the delay"
* tag 'driver-core-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: remove DRIVER_ATTR
fpga: altera-cvp: remove DRIVER_ATTR() usage
driver core: platform: Don't read past the end of "driver_override" buffer
base: arch_topology: fix section mismatch build warnings
driver core: suppress sending MODALIAS in UNBIND uevents
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are a handful of char/misc driver fixes for 4.14-rc4.
Nothing major, some binder fixups, hyperv fixes, and other tiny
things.
All of these have been sitting in my tree for way too long, sorry for
the delay in getting them to you. All have been in linux-next for a
few weeks, and despite some people's feeling about if linux-next
actually tests things, I think it's a good "soak test" for patches"
* tag 'char-misc-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Drivers: hv: fcopy: restore correct transfer length
vmbus: don't acquire the mutex in vmbus_hvsock_device_unregister()
intel_th: pci: Add Lewisburg PCH support
intel_th: pci: Add Cedar Fork PCH support
stm class: Fix a use-after-free
nvmem: add missing of_node_put() in of_nvmem_cell_get()
nvmem: core: return EFBIG on out-of-range write
auxdisplay: charlcd: properly restore atomic counter on error path
binder: fix memory corruption in binder_transaction binder
binder: fix an ret value override
android: binder: fix type mismatch warning
|
|
Dell Wireless 5819/5818 devices are re-branded Sierra Wireless MC74
series which will by default boot with vid 0x413c and pid's 0x81cf,
0x81d0, 0x81d1, 0x81d2.
Signed-off-by: Shrirang Bagul <shrirang.bagul@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
