summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-08-09PCI: designware-ep: Allow pci_epc_set_bar() update inbound map addressFrank Li
ntb_mw_set_trans() will set memory map window after endpoint function driver bind. The inbound map address need be updated dynamically when using NTB by PCIe Root Port and PCIe Endpoint connection. Checking if iatu already assigned to the BAR, if yes, using assigned iatu number to update inbound address map and skip set BAR's register. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-09can: mcp251x: Fix race condition on receive interruptSebastian Würl
The mcp251x driver uses both receiving mailboxes of the CAN controller chips. For retrieving the CAN frames from the controller via SPI, it checks once per interrupt which mailboxes have been filled and will retrieve the messages accordingly. This introduces a race condition, as another CAN frame can enter mailbox 1 while mailbox 0 is emptied. If now another CAN frame enters mailbox 0 until the interrupt handler is called next, mailbox 0 is emptied before mailbox 1, leading to out-of-order CAN frames in the network device. This is fixed by checking the interrupt flags once again after freeing mailbox 0, to correctly also empty mailbox 1 before leaving the handler. For reproducing the bug I created the following setup: - Two CAN devices, one Raspberry Pi with MCP2515, the other can be any. - Setup CAN to 1 MHz - Spam bursts of 5 CAN-messages with increasing CAN-ids - Continue sending the bursts while sleeping a second between the bursts - Check on the RPi whether the received messages have increasing CAN-ids - Without this patch, every burst of messages will contain a flipped pair v3: https://lore.kernel.org/all/20220804075914.67569-1-sebastian.wuerl@ororatech.com v2: https://lore.kernel.org/all/20220804064803.63157-1-sebastian.wuerl@ororatech.com v1: https://lore.kernel.org/all/20220803153300.58732-1-sebastian.wuerl@ororatech.com Fixes: bf66f3736a94 ("can: mcp251x: Move to threaded interrupts instead of workqueues.") Signed-off-by: Sebastian Würl <sebastian.wuerl@ororatech.com> Link: https://lore.kernel.org/all/20220804081411.68567-1-sebastian.wuerl@ororatech.com [mkl: reduce scope of intf1, eflag1] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-08-09plip: avoid rcu debug splatFlorian Westphal
WARNING: suspicious RCU usage 5.2.0-rc2-00605-g2638eb8b50cfc #1 Not tainted drivers/net/plip/plip.c:1110 suspicious rcu_dereference_check() usage! plip_open is called with RTNL held, switch to the correct helper. Fixes: 2638eb8b50cf ("net: ipv4: provide __rcu annotation for ifa_list") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20220807115304.13257-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-09net: bgmac: Fix a BUG triggered by wrong bytes_complSandor Bodo-Merle
On one of our machines we got: kernel BUG at lib/dynamic_queue_limits.c:27! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM CPU: 0 PID: 1166 Comm: irq/41-bgmac Tainted: G W O 4.14.275-rt132 #1 Hardware name: BRCM XGS iProc task: ee3415c0 task.stack: ee32a000 PC is at dql_completed+0x168/0x178 LR is at bgmac_poll+0x18c/0x6d8 pc : [<c03b9430>] lr : [<c04b5a18>] psr: 800a0313 sp : ee32be14 ip : 000005ea fp : 00000bd4 r10: ee558500 r9 : c0116298 r8 : 00000002 r7 : 00000000 r6 : ef128810 r5 : 01993267 r4 : 01993851 r3 : ee558000 r2 : 000070e1 r1 : 00000bd4 r0 : ee52c180 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 12c5387d Table: 8e88c04a DAC: 00000051 Process irq/41-bgmac (pid: 1166, stack limit = 0xee32a210) Stack: (0xee32be14 to 0xee32c000) be00: ee558520 ee52c100 ef128810 be20: 00000000 00000002 c0116298 c04b5a18 00000000 c0a0c8c4 c0951780 00000040 be40: c0701780 ee558500 ee55d520 ef05b340 ef6f9780 ee558520 00000001 00000040 be60: ffffe000 c0a56878 ef6fa040 c0952040 0000012c c0528744 ef6f97b0 fffcfb6a be80: c0a04104 2eda8000 c0a0c4ec c0a0d368 ee32bf44 c0153534 ee32be98 ee32be98 bea0: ee32bea0 ee32bea0 ee32bea8 ee32bea8 00000000 c01462e4 ffffe000 ef6f22a8 bec0: ffffe000 00000008 ee32bee4 c0147430 ffffe000 c094a2a8 00000003 ffffe000 bee0: c0a54528 00208040 0000000c c0a0c8c4 c0a65980 c0124d3c 00000008 ee558520 bf00: c094a23c c0a02080 00000000 c07a9910 ef136970 ef136970 ee30a440 ef136900 bf20: ee30a440 00000001 ef136900 ee30a440 c016d990 00000000 c0108db0 c012500c bf40: ef136900 c016da14 ee30a464 ffffe000 00000001 c016dd14 00000000 c016db28 bf60: ffffe000 ee21a080 ee30a400 00000000 ee32a000 ee30a440 c016dbfc ee25fd70 bf80: ee21a09c c013edcc ee32a000 ee30a400 c013ec7c 00000000 00000000 00000000 bfa0: 00000000 00000000 00000000 c0108470 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c03b9430>] (dql_completed) from [<c04b5a18>] (bgmac_poll+0x18c/0x6d8) [<c04b5a18>] (bgmac_poll) from [<c0528744>] (net_rx_action+0x1c4/0x494) [<c0528744>] (net_rx_action) from [<c0124d3c>] (do_current_softirqs+0x1ec/0x43c) [<c0124d3c>] (do_current_softirqs) from [<c012500c>] (__local_bh_enable+0x80/0x98) [<c012500c>] (__local_bh_enable) from [<c016da14>] (irq_forced_thread_fn+0x84/0x98) [<c016da14>] (irq_forced_thread_fn) from [<c016dd14>] (irq_thread+0x118/0x1c0) [<c016dd14>] (irq_thread) from [<c013edcc>] (kthread+0x150/0x158) [<c013edcc>] (kthread) from [<c0108470>] (ret_from_fork+0x14/0x24) Code: a83f15e0 0200001a 0630a0e1 c3ffffea (f201f0e7) The issue seems similar to commit 90b3b339364c ("net: hisilicon: Fix a BUG trigered by wrong bytes_compl") and potentially introduced by commit b38c83dd0866 ("bgmac: simplify tx ring index handling"). If there is an RX interrupt between setting ring->end and netdev_sent_queue() we can hit the BUG_ON as bgmac_dma_tx_free() can miscalculate the queue size while called from bgmac_poll(). The machine which triggered the BUG runs a v4.14 RT kernel - but the issue seems present in mainline too. Fixes: b38c83dd0866 ("bgmac: simplify tx ring index handling") Signed-off-by: Sandor Bodo-Merle <sbodomerle@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220808173939.193804-1-sbodomerle@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-09net: dsa: felix: suppress non-changes to the tagging protocolVladimir Oltean
The way in which dsa_tree_change_tag_proto() works is that when dsa_tree_notify() fails, it doesn't know whether the operation failed mid way in a multi-switch tree, or it failed for a single-switch tree. So even though drivers need to fail cleanly in ds->ops->change_tag_protocol(), DSA will still call dsa_tree_notify() again, to restore the old tag protocol for potential switches in the tree where the change did succeeed (before failing for others). This means for the felix driver that if we report an error in felix_change_tag_protocol(), we'll get another call where proto_ops == old_proto_ops. If we proceed to act upon that, we may do unexpected things. For example, we will call dsa_tag_8021q_register() twice in a row, without any dsa_tag_8021q_unregister() in between. Then we will actually call dsa_tag_8021q_unregister() via old_proto_ops->teardown, which (if it manages to run at all, after walking through corrupted data structures) will leave the ports inoperational anyway. The bug can be readily reproduced if we force an error while in tag_8021q mode; this crashes the kernel. echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo edsa > /sys/class/net/eno2/dsa/tagging # -EPROTONOSUPPORT Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014 Call trace: vcap_entry_get+0x24/0x124 ocelot_vcap_filter_del+0x198/0x270 felix_tag_8021q_vlan_del+0xd4/0x21c dsa_switch_tag_8021q_vlan_del+0x168/0x2cc dsa_switch_event+0x68/0x1170 dsa_tree_notify+0x14/0x34 dsa_port_tag_8021q_vlan_del+0x84/0x110 dsa_tag_8021q_unregister+0x15c/0x1c0 felix_tag_8021q_teardown+0x16c/0x180 felix_change_tag_protocol+0x1bc/0x230 dsa_switch_event+0x14c/0x1170 dsa_tree_change_tag_proto+0x118/0x1c0 Fixes: 7a29d220f4c0 ("net: dsa: felix: reimplement tagging protocol change with function pointers") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220808125127.3344094-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-09Merge tag 'wireless-2022-08-09' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.0 First set of fixes for v6.0. Small one this time, fix a cfg80211 warning seen with brcmfmac and remove an unncessary inline keyword from wilc1000. * tag 'wireless-2022-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: wilc1000: fix spurious inline in wilc_handle_disconnect() wifi: cfg80211: Fix validating BSS pointers in __cfg80211_connect_result ==================== Link: https://lore.kernel.org/r/20220809164756.B1DAEC433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-09ACPI: property: Fix error handling in acpi_init_properties()Sakari Ailus
buf.pointer, memory for storing _DSD data and nodes, was released if either parsing properties or, as recently added, attaching data node tags failed. Alas, properties were still left pointing to this memory if parsing properties were successful but attaching data node tags failed. Fix this by separating error handling for the two, and leaving properties intact if data nodes cannot be tagged for a reason or another. Reported-by: kernel test robot <oliver.sang@intel.com> Fixes: 1d52f10917a7 ("ACPI: property: Tie data nodes to acpi handles") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> [ rjw: Drop unrelated white space change ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-09drm/gem: Properly annotate WW context on drm_gem_lock_reservations() errorDmitry Osipenko
Use ww_acquire_fini() in the error code paths. Otherwise lockdep thinks that lock is held when lock's memory is freed after the drm_gem_lock_reservations() error. The ww_acquire_context needs to be annotated as "released", which fixes the noisy "WARNING: held lock freed!" splat of VirtIO-GPU driver with CONFIG_DEBUG_MUTEXES=y and enabled lockdep. Cc: stable@vger.kernel.org Fixes: 7edc3e3b975b5 ("drm: Add helpers for locking an array of BO reservations.") Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220630200405.1883897-2-dmitry.osipenko@collabora.com
2022-08-09drm/shmem-helper: Add missing vunmap on errorDmitry Osipenko
The vmapping of dma-buf may succeed, but DRM SHMEM rejects the IOMEM mapping, and thus, drm_gem_shmem_vmap_locked() should unvmap the IOMEM before erroring out. Cc: stable@vger.kernel.org Fixes: 49a3f51dfeee ("drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends") Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220630200058.1883506-2-dmitry.osipenko@collabora.com
2022-08-09ntb: intel: add GNR support for Intel PCIe gen5 NTBDave Jiang
Add Intel Granite Rapids NTB PCI device ID and related enabling. Expectation is same hardware interface as Saphire Rapids Xeon platforms. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-09NTB: ntb_tool: uninitialized heap data in tool_fn_write()Dan Carpenter
The call to: ret = simple_write_to_buffer(buf, size, offp, ubuf, size); will return success if it is able to write even one byte to "buf". The value of "*offp" controls which byte. This could result in reading uninitialized data when we do the sscanf() on the next line. This code is not really desigined to handle partial writes where *offp is non-zero and the "buf" is preserved and re-used between writes. Just ban partial writes and replace the simple_write_to_buffer() with copy_from_user(). Fixes: 578b881ba9c4 ("NTB: Add tool test client") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-09ntb: idt: fix clang -Wformat warningsJustin Stitt
When building with Clang we encounter these warnings: | drivers/ntb/hw/idt/ntb_hw_idt.c:2409:28: error: format specifies type | 'unsigned char' but the argument has type 'int' [-Werror,-Wformat] | "\t%hhu-%hhu.\t", idx + cnt - 1); - | drivers/ntb/hw/idt/ntb_hw_idt.c:2438:29: error: format specifies type | 'unsigned char' but the argument has type 'int' [-Werror,-Wformat] | "\t%hhu-%hhu.\t", idx + cnt - 1); - | drivers/ntb/hw/idt/ntb_hw_idt.c:2484:15: error: format specifies type | 'unsigned char' but the argument has type 'int' [-Werror,-Wformat], src); For the first two warnings the format specifier used is `%hhu` which describes a u8. Both `idx` and `cnt` are u8 as well. However, the expression as a whole is promoted to an int as you cannot get smaller-than-int from addition. Therefore, to fix the warning, use the promoted-to-type's format specifier -- in this case `%d`. example: `` uint8_t a = 4, b = 7; int size = sizeof(a + b - 1); printf("%d\n", size); // output: 4 ``` For the last warning, src is of type `int` while the format specifier describes a u8. The fix here is just to use the proper specifier `%d`. See more: (https://wiki.sei.cmu.edu/confluence/display/c/INT02-C.+Understand+integer+conversion+rules) "Integer types smaller than int are promoted when an operation is performed on them. If all values of the original type can be represented as an int, the value of the smaller type is converted to an int; otherwise, it is converted to an unsigned int." Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Justin Stitt <justinstitt@google.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-09can: ems_usb: fix clang's -Wunaligned-access warningMarc Kleine-Budde
clang emits a -Wunaligned-access warning on struct __packed ems_cpc_msg. The reason is that the anonymous union msg (not declared as packed) is being packed right after some non naturally aligned variables (3*8 bits + 2*32) inside a packed struct: | struct __packed ems_cpc_msg { | u8 type; /* type of message */ | u8 length; /* length of data within union 'msg' */ | u8 msgid; /* confirmation handle */ | __le32 ts_sec; /* timestamp in seconds */ | __le32 ts_nsec; /* timestamp in nano seconds */ | /* ^ not naturally aligned */ | | union { | /* ^ not declared as packed */ | u8 generic[64]; | struct cpc_can_msg can_msg; | struct cpc_can_params can_params; | struct cpc_confirm confirmation; | struct cpc_overrun overrun; | struct cpc_can_error error; | struct cpc_can_err_counter err_counter; | u8 can_state; | } msg; | }; Starting from LLVM 14, having an unpacked struct nested in a packed struct triggers a warning. c.f. [1]. Fix the warning by marking the anonymous union as packed. [1] https://github.com/llvm/llvm-project/issues/55520 Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Link: https://lore.kernel.org/all/20220802094021.959858-1-mkl@pengutronix.de Cc: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com> Cc: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-08-08s390/qeth: cache link_info for ethtoolAlexandra Winter
Since commit e6e771b3d897 ("s390/qeth: detach netdevice while card is offline") there was a timing window during recovery, that qeth_query_card_info could be sent to the card, even before it was ready for it, leading to a failing card recovery. There is evidence that this window was hit, as not all callers of get_link_ksettings() check for netif_device_present. Use cached values in qeth_get_link_ksettings(), instead of calling qeth_query_card_info() and falling back to default values in case it fails. Link info is already updated when the card goes online, e.g. after STARTLAN (physical link up). Set the link info to default values, when the card goes offline or at STOPLAN (physical link down). A follow-on patch will improve values reported for link down. Fixes: e6e771b3d897 ("s390/qeth: detach netdevice while card is offline") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com> Link: https://lore.kernel.org/r/20220805155714.59609-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-08net: phy: dp83867: fix get nvmem cell failNikita Shubin
If CONFIG_NVMEM is not set of_nvmem_cell_get, of_nvmem_device_get functions will return ERR_PTR(-EOPNOTSUPP) and "failed to get nvmem cell io_impedance_ctrl" error would be reported despite "io_impedance_ctrl" is completely missing in Device Tree and we should use default values. Check -EOPNOTSUPP togather with -ENOENT to avoid this situation. Fixes: 5c2d0a6a0701 ("net: phy: dp83867: implement support for io_impedance_ctrl nvmem cell") Signed-off-by: Nikita Shubin <n.shubin@yadro.com> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220805084843.24542-1-nikita.shubin@maquefel.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-08net: phy: c45 baset1: do not skip aneg configuration if clock role is not ↵Oleksij Rempel
specified In case master/slave clock role is not specified (which is default), the aneg registers will not be written. The visible impact of this is missing pause advertisement. So, rework genphy_c45_baset1_an_config_aneg() to be able to write advertisement registers even if clock role is unknown. Fixes: 3da8ffd8545f ("net: phy: Add 10BASE-T1L support in phy-c45") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220805073159.908643-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-08atm: idt77252: fix use-after-free bugs caused by tst_timerDuoming Zhou
There are use-after-free bugs caused by tst_timer. The root cause is that there are no functions to stop tst_timer in idt77252_exit(). One of the possible race conditions is shown below: (thread 1) | (thread 2) | idt77252_init_one | init_card | fill_tst | mod_timer(&card->tst_timer, ...) idt77252_exit | (wait a time) | tst_timer | | ... kfree(card) // FREE | | card->soft_tst[e] // USE The idt77252_dev is deallocated in idt77252_exit() and used in timer handler. This patch adds del_timer_sync() in idt77252_exit() in order that the timer handler could be stopped before the idt77252_dev is deallocated. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220805070008.18007-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-08net: dsa: felix: fix min gate len calculation for tc when its first gate is ↵Vladimir Oltean
closed min_gate_len[tc] is supposed to track the shortest interval of continuously open gates for a traffic class. For example, in the following case: TC 76543210 t0 00000001b 200000 ns t1 00000010b 200000 ns min_gate_len[0] and min_gate_len[1] should be 200000, while min_gate_len[2-7] should be 0. However what happens is that min_gate_len[0] is 200000, but min_gate_len[1] ends up being 0 (despite gate_len[1] being 200000 at the point where the logic detects the gate close event for TC 1). The problem is that the code considers a "gate close" event whenever it sees that there is a 0 for that TC (essentially it's level rather than edge triggered). By doing that, any time a gate is seen as closed without having been open prior, gate_len, which is 0, will be written into min_gate_len. Once min_gate_len becomes 0, it's impossible for it to track anything higher than that (the length of actually open intervals). To fix this, we make the writing to min_gate_len[tc] be edge-triggered, which avoids writes for gates that are closed in consecutive intervals. However what this does is it makes us need to special-case the permanently closed gates at the end. Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220804202817.1677572-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-08tsnep: Fix tsnep_tx_unmap() error path usageGerhard Engleder
If tsnep_tx_map() fails, then tsnep_tx_unmap() shall start at the write index like tsnep_tx_map(). This is different to the normal operation. Thus, add an additional parameter to tsnep_tx_unmap() to enable start at different positions for successful TX and failed TX. Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-08tsnep: Fix unused warning for 'tsnep_of_match'Gerhard Engleder
Kernel test robot found the following warning: drivers/net/ethernet/engleder/tsnep_main.c:1254:34: warning: 'tsnep_of_match' defined but not used [-Wunused-const-variable=] of_match_ptr() compiles into NULL if CONFIG_OF is disabled. tsnep_of_match exists always so use of of_match_ptr() is useless. Fix warning by dropping of_match_ptr(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-08Merge tag 'pull-work.iov_iter-rebased' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more iov_iter updates from Al Viro: - more new_sync_{read,write}() speedups - ITER_UBUF introduction - ITER_PIPE cleanups - unification of iov_iter_get_pages/iov_iter_get_pages_alloc and switching them to advancing semantics - making ITER_PIPE take high-order pages without splitting them - handling copy_page_from_iter() for high-order pages properly * tag 'pull-work.iov_iter-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits) fix copy_page_from_iter() for compound destinations hugetlbfs: copy_page_to_iter() can deal with compound pages copy_page_to_iter(): don't split high-order page in case of ITER_PIPE expand those iov_iter_advance()... pipe_get_pages(): switch to append_pipe() get rid of non-advancing variants ceph: switch the last caller of iov_iter_get_pages_alloc() 9p: convert to advancing variant of iov_iter_get_pages_alloc() af_alg_make_sg(): switch to advancing variant of iov_iter_get_pages() iter_to_pipe(): switch to advancing variant of iov_iter_get_pages() block: convert to advancing variants of iov_iter_get_pages{,_alloc}() iov_iter: advancing variants of iov_iter_get_pages{,_alloc}() iov_iter: saner helper for page array allocation fold __pipe_get_pages() into pipe_get_pages() ITER_XARRAY: don't open-code DIV_ROUND_UP() unify the rest of iov_iter_get_pages()/iov_iter_get_pages_alloc() guts unify xarray_get_pages() and xarray_get_pages_alloc() unify pipe_get_pages() and pipe_get_pages_alloc() iov_iter_get_pages(): sanity-check arguments iov_iter_get_pages_alloc(): lift freeing pages array on failure exits into wrapper ...
2022-08-08iov_iter: advancing variants of iov_iter_get_pages{,_alloc}()Al Viro
Most of the users immediately follow successful iov_iter_get_pages() with advancing by the amount it had returned. Provide inline wrappers doing that, convert trivial open-coded uses of those. BTW, iov_iter_get_pages() never returns more than it had been asked to; such checks in cifs ought to be removed someday... Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-08-09rtc: spear: set range maxZeng Jingxiang
In the commit f395e1d3b28d7c2c67b73bd467c4fb79523e1c65 ("rtc: spear: set range"), the value of RTC_TIMESTAMP_END_9999 was incorrectly set to range_min. 390 config->rtc->range_min = RTC_TIMESTAMP_BEGIN_0000; 391 config->rtc->range_max = RTC_TIMESTAMP_END_9999; Fixes: f395e1d3b28d ("rtc: spear: set range") Signed-off-by: Zeng Jingxiang <linuszeng@tencent.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220728100101.1906801-1-zengjx95@gmail.com
2022-08-08Merge tag 'rproc-v5.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "This introduces support for the remoteproc on Mediatek MT8188, and enables caches for MT8186 SCP. It adds support for PRU cores found on the TI K3 AM62x SoCs. It moves the recovery work after a firmware crash to an unbound workqueue, to allow recovery to happen in parallel. A new DMA API is introduced to release dma_mem for a device. It adds support a panic handler for the Qualcomm modem remoteproc, with the goal of having caches flushed in memory dumps for post-mortem debugging and it introduces a mechanism to wait for the modem firmware on SM8450 to decrypt part of its memory for post-mortem debugging. Qualcomm sysmon is restricted to only inform remote processors about peers that are actually running, to avoid a race where Linux tries to notify a recovering remote processor about its peers new state. A mechanism for waiting for the sysmon connection to be established is also introduced, to avoid out-of-sync updates for rapidly restarting remote processors. A number of Devicetree binding cleanups and conversions to YAML are introduced, to facilitate Devicetree validation. Lastly it introduces a number of smaller fixes and cleanups in the core and a few different drivers" * tag 'rproc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (42 commits) remoteproc: qcom_q6v5_pas: Do not fail if regulators are not found drivers/remoteproc: fix repeated words in comments remoteproc: Directly use ida_alloc()/free() remoteproc: Use unbounded workqueue for recovery work remoteproc: using pm_runtime_resume_and_get instead of pm_runtime_get_sync remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators remoteproc: sysmon: Send sysmon state only for running rprocs remoteproc: sysmon: Wait for SSCTL service to come up remoteproc: qcom: q6v5: Set q6 state to offline on receiving wdog irq remoteproc: qcom: pas: Check if coredump is enabled remoteproc: qcom: pas: Mark devices as wakeup capable remoteproc: qcom: pas: Mark va as io memory remoteproc: qcom: pas: Add decrypt shutdown support for modem remoteproc: qcom: q6v5-mss: add powerdomains to MSM8996 config remoteproc: qcom_q6v5: Introduce panic handler for MSS remoteproc: qcom_q6v5_mss: Update MBA log info remoteproc: qcom: correct kerneldoc remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use remoteproc: qcom: using pm_runtime_resume_and_get to simplify the code remoteproc: mediatek: Support MT8188 SCP ...
2022-08-08Merge tag 'rpmsg-v5.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull rpmsg updates from Bjorn Andersson: "This contains fixes and cleanups in the rpmsg core, Qualcomm SMD and GLINK drivers, a circular lock dependency in the Mediatek driver and a possible race condition in the rpmsg_char driver is resolved" * tag 'rpmsg-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: rpmsg: convert sysfs snprintf to sysfs_emit rpmsg: qcom_smd: Fix refcount leak in qcom_smd_parse_edge rpmsg: qcom: correct kerneldoc rpmsg: qcom: glink: remove unused name rpmsg: qcom: glink: replace strncpy() with strscpy_pad() rpmsg: Strcpy is not safe, use strscpy_pad() instead rpmsg: Fix possible refcount leak in rpmsg_register_device_override() rpmsg: Fix parameter naming for announce_create/destroy ops rpmsg: mtk_rpmsg: Fix circular locking dependency rpmsg: char: Add mutex protection for rpmsg_eptdev_open()
2022-08-08Merge tag 'linux-watchdog-5.20-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add RTL9310 support - sp805_wdt: add arm cmsdk apb wdt support - Remove #ifdef guards for PM related functions for several watchdog device drivers - pm8916_wdt reboot improvements - Several other fixes and improvements * tag 'linux-watchdog-5.20-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits) watchdog: armada_37xx_wdt: check the return value of devm_ioremap() in armada_37xx_wdt_probe() watchdog: dw_wdt: Fix comment typo watchdog: Fix comment typo dt-bindings: watchdog: Add fsl,scu-wdt yaml file watchdog:Fix typo in comment watchdog: pm8916_wdt: Handle watchdog enabled by bootloader watchdog: pm8916_wdt: Report reboot reason watchdog: pm8916_wdt: Avoid read of write-only PET register watchdog: wdat_wdt: Remove #ifdef guards for PM related functions watchdog: tegra_wdt: Remove #ifdef guards for PM related functions watchdog: st_lpc_wdt: Remove #ifdef guards for PM related functions watchdog: sama5d4_wdt: Remove #ifdef guards for PM related functions watchdog: s3c2410_wdt: Remove #ifdef guards for PM related functions watchdog: mtk_wdt: Remove #ifdef guards for PM related functions watchdog: dw_wdt: Remove #ifdef guards for PM related functions watchdog: bcm7038_wdt: Remove #ifdef guards for PM related functions watchdog: realtek-otto: add RTL9310 support dt-bindings: watchdog: realtek,otto-wdt: add RTL9310 watchdog: sp805_wdt: add arm cmsdk apb wdt support watchdog: sp5100_tco: Fix a memory leak of EFCH MMIO resource ...
2022-08-08Merge tag 'pm-5.20-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are ARM cpufreq updates and operating performance points (OPP) updates plus one cpuidle update adding a new trace point. Specifics: - Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang). - Minor cleanups and support for new boards for Qcom cpufreq drivers (Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang). - Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar). - Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh Kumar). - Add dev_pm_opp_set_config() and friends and migrate other users and helpers to using them (Viresh Kumar). - Add support for multiple clocks for a device (Viresh Kumar and Krzysztof Kozlowski). - Configure resources before adding OPP table for Venus (Stanimir Varbanov). - Keep reference count up for opp->np and opp_table->np while they are still in use (Liang He). - Minor OPP cleanups (Viresh Kumar and Yang Li). - Add a trace event for cpuidle to track missed (too deep or too shallow) wakeups (Kajetan Puchalski)" * tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits) cpuidle: Add cpu_idle_miss trace event venus: pm_helpers: Fix warning in OPP during probe OPP: Don't drop opp->np reference while it is still in use OPP: Don't drop opp_table->np reference while it is still in use cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible dt-bindings: opp: Add msm8939 to the compatible list dt-bindings: opp: Add missing compat devices dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks cpufreq: Change order of online() CB and policy->cpus modification cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call cpufreq: qcom-hw: Disable LMH irq when disabling policy cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init() OPP: Remove dev{m}_pm_opp_of_add_table_noclk() PM / devfreq: tegra30: Register config_clks helper OPP: Allow config_clks helper for single clk case OPP: Provide a simple implementation to configure multiple clocks OPP: Assert clk_count == 1 for single clk helpers ...
2022-08-08Merge tag 'thermal-5.20-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more thermal control updates from Rafael Wysocki: "These fix an error code path issue leading to a NULL pointer dereference, drop Kconfig dependencies that are not needed any more after recent changes, add CPU IDs for new chips to a driver and fix up the tmon utility. Specifics: - Fix NULL pointer dereference in the thermal sysfs interface that results from an error code path mishandling (Rafael Wysocki). - Drop COMPILE_TEST dependency that's not needed any more from two thermal Kconfig entries (Jean Delvare). - Make the Intel TCC cooling driver support Alder Lake-N and Raptor Lake-P (Sumeet Pawnikar). - Fix possible path truncations in the tmon utility (Florian Fainelli)" * tag 'thermal-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: tools/thermal: Fix possible path truncations thermal: Drop obsolete dependency on COMPILE_TEST thermal: sysfs: Fix cooling_device_stats_setup() error code path thermal: intel: Add TCC cooling support for Alder Lake-N and Raptor Lake-P
2022-08-08vfio: Move vfio.c to vfio_main.cJason Gunthorpe
If a source file has the same name as a module then kbuild only supports a single source file in the module. Rename vfio.c to vfio_main.c so that we can have more that one .c file in vfio.ko. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20220731125503.142683-5-yishaih@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-08-08Merge tag 'leds-5.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "A new driver for bcm63138, is31fl319x updates, fixups for multicolor. The clevo-mail driver got disabled, it needs an API fix" * tag 'leds-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (23 commits) leds: is31fl319x: use simple i2c probe function leds: is31fl319x: Fix devm vs. non-devm ordering leds: is31fl319x: Make use of dev_err_probe() leds: is31fl319x: Make use of device properties leds: is31fl319x: Cleanup formatting and dev_dbg calls leds: is31fl319x: Add support for is31fl319{0,1,3} chips leds: is31fl319x: Move chipset-specific values in chipdef struct leds: is31fl319x: Use non-wildcard names for vars, structs and defines leds: is31fl319x: Add missing si-en compatibles dt-bindings: leds: pwm-multicolor: document max-brigthness leds: turris-omnia: convert to use dev_groups leds: leds-bcm63138: get rid of LED_OFF leds: add help info about BCM63138 module name dt-bindings: leds: leds-bcm63138: unify full stops in descriptions dt-bindings: leds: lp50xx: fix LED children names dt-bindings: leds: class-multicolor: reference class directly in multi-led node leds: bcm63138: add support for BCM63138 controller dt-bindings: leds: add Broadcom's BCM63138 controller leds: clevo-mail: Mark as broken pending interface fix leds: pwm-multicolor: Support active-low LEDs ...
2022-08-08rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0Rafael J. Wysocki
The ACPI_FADT_LOW_POWER_S0 flag merely means that it is better to use low-power S0 idle on the given platform than S3 (provided that the latter is supported) and it doesn't preclude using either of them (which of them will be used depends on the choices made by user space). For this reason, there is no benefit from checking that flag in use_acpi_alarm_quirks(). First off, it cannot be a bug to do S3 with use_acpi_alarm set, because S3 can be used on systems with ACPI_FADT_LOW_POWER_S0 and it must work if really supported, so the ACPI_FADT_LOW_POWER_S0 check is not needed to protect the S3-capable systems from failing. Second, suspend-to-idle can be carried out on a system with ACPI_FADT_LOW_POWER_S0 unset and it is expected to work, so if setting use_acpi_alarm is needed to handle that case correctly, it should be set regardless of the ACPI_FADT_LOW_POWER_S0 value. Accordingly, drop the ACPI_FADT_LOW_POWER_S0 check from use_acpi_alarm_quirks(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/12054246.O9o76ZdvQC@kreacher
2022-08-08rtc: zynqmp: initialize fract_tickAlexandre Belloni
fract_tick is used uninitialized when fract_offset is 0 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20220727100018.3301470-1-alexandre.belloni@bootlin.com
2022-08-08Merge tag 'tty-6.0-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.0-rc1. It was delayed from last week as I wanted to make sure the last commit here got some good testing in linux-next and elsewhere as it seemed to show up only late in testing for some reason. Nothing major here, just lots of cleanups from Jiri and Ilpo to make the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo). Also included in here is the obligatory n_gsm updates from Daniel Starke and lots of tiny driver updates and minor fixes and tweaks for other smaller serial drivers. All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements tty: amiserial: Fix comment typo tty: serial: document uart_get_console() tty: serial: serial_core, reformat kernel-doc for functions Documentation: serial: link uart_ops properly Documentation: serial: move GPIO kernel-doc to the functions Documentation: serial: dedup kernel-doc for uart functions Documentation: serial: move uart_ops documentation to the struct dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126 serial: mvebu-uart: uart2 error bits clearing tty: serial: fsl_lpuart: correct the count of break characters serial: stm32: make info structs static to avoid sparse warnings serial: fsl_lpuart: zero out parity bit in CS7 mode tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate. serial: 8250_bcm2835aux: Add missing clk_disable_unprepare() tty: vt: initialize unicode screen buffer serial: remove VR41XX serial driver serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags serial: 8250_dwlib: remove redundant sanity check for RS485 flags dt_bindings: rs485: Correct delay values ...
2022-08-08Merge branches 'thermal-core' and 'thermal-tools'Rafael J. Wysocki
Merge additional changes in the thermal core and thermal tools updates for 5.20-rc1: - Fix NULL poiter dereference in the thermal sysfs interface that results from an error code path mishandling (Rafael Wysocki). - Drop COMPILE_TEST dependency that's not needed any more from two thermal Kconfig entries (Jean Delvare). - Fix possible path truncations in the tmon utility (Florian Fainelli). * thermal-core: thermal: Drop obsolete dependency on COMPILE_TEST thermal: sysfs: Fix cooling_device_stats_setup() error code path * thermal-tools: tools/thermal: Fix possible path truncations
2022-08-08Merge branch 'pm-cpufreq'Rafael J. Wysocki
Merge ARM cpufreq updates for 5.20-rc1. * pm-cpufreq: cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible dt-bindings: opp: Add msm8939 to the compatible list dt-bindings: opp: Add missing compat devices dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks cpufreq: Change order of online() CB and policy->cpus modification cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call cpufreq: qcom-hw: Disable LMH irq when disabling policy cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
2022-08-08Merge branch 'pm-opp'Rafael J. Wysocki
Merge operating performance points (OPP) updates for 5.20-rc1. * pm-opp: (43 commits) venus: pm_helpers: Fix warning in OPP during probe OPP: Don't drop opp->np reference while it is still in use OPP: Don't drop opp_table->np reference while it is still in use OPP: Remove dev{m}_pm_opp_of_add_table_noclk() PM / devfreq: tegra30: Register config_clks helper OPP: Allow config_clks helper for single clk case OPP: Provide a simple implementation to configure multiple clocks OPP: Assert clk_count == 1 for single clk helpers OPP: Add key specific assert() method to key finding helpers OPP: Compare bandwidths for all paths in _opp_compare_key() OPP: Allow multiple clocks for a device dt-bindings: opp: accept array of frequencies OPP: Make dev_pm_opp_set_opp() independent of frequency OPP: Reuse _opp_compare_key() in _opp_add_static_v2() OPP: Remove rate_not_available parameter to _opp_add() OPP: Use consistent names for OPP table instances OPP: Use generic key finding helpers for bandwidth key OPP: Use generic key finding helpers for level key OPP: Add generic key finding helpers and use them for freq APIs OPP: Remove dev_pm_opp_find_freq_ceil_by_volt() ...
2022-08-08ACPI: VIOT: Do not dereference fwnode in struct deviceAndy Shevchenko
In order to make the underneath API easier to change in the future, prevent users from dereferencing fwnode from struct device. Instead, use the specific dev_fwnode() and device_match_fwnode() APIs for that. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-08Merge tag 'hwlock-v5.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull hwspinlock updates from Bjorn Andersson: "This removes the need for representing the Qualcomm SFPB mutex using an intermediate syscon node and it clean up the pm_runtime_get_sync() usage in the OMAP hwspinlock driver" * tag 'hwlock-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: hwspinlock: qcom: Add support for mmio usage to sfpb-mutex hwspinlock: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
2022-08-08Merge tag 'mailbox-v5.20' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - mtk: - use rx_callback instead of cmdq_task_cb - qcom: - add syscon const - add SM6375 compatible - imx: - enable RST channel - clear pending irqs * tag 'mailbox-v5.20' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: imx: clear pending interrupts dt-bindings: mailbox: qcom-ipcc: Add SM6375 compatible mailbox: imx: support RST channel dt-bindings: mailbox: imx-mu: add RST channel dt-bindings: mailbox: qcom,apcs-kpss-global: Add syscon const for relevant entries mailbox: mtk-cmdq: Remove proprietary cmdq_task_cb
2022-08-08Merge tag 'hyperv-next-signed-20220807' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: "A few miscellaneous patches. There is no large patch series for this merge window" * tag 'hyperv-next-signed-20220807' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: Create debugfs file with hyper-v balloon usage information drm/hyperv : Removing the restruction of VRAM allocation with PCI bar size PCI: hv: Take a const cpumask in hv_compose_msi_req_get_cpu() Drivers: hv: vm_bus: Handle vmbus rescind calls after vmbus is suspended
2022-08-08remoteproc: qcom_q6v5_pas: Do not fail if regulators are not foundManivannan Sadhasivam
devm_regulator_get_optional() API will return -ENODEV if the regulator was not found. For the optional supplies CX, PX we should not fail in that case but rather continue. So let's catch that error and continue silently if those regulators are not found. The commit 3f52d118f992 ("remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators") was supposed to do the same but it missed the fact that devm_regulator_get_optional() API returns -ENODEV when the regulator was not found. Cc: Abel Vesa <abel.vesa@linaro.org> Fixes: 3f52d118f992 ("remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators") Reported-by: Steev Klimaszewski <steev@kali.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220801053939.12556-1-manivannan.sadhasivam@linaro.org
2022-08-08virtio_net: fix memory leak inside XPD_TX with mergeableXuan Zhuo
When we call xdp_convert_buff_to_frame() to get xdpf, if it returns NULL, we should check if xdp_page was allocated by xdp_linearize_page(). If it is newly allocated, it should be freed here alone. Just like any other "goto err_xdp". Fixes: 44fa2dbd4759 ("xdp: transition into using xdp_frame for ndo_xdp_xmit") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08wifi: wilc1000: fix spurious inline in wilc_handle_disconnect()Kalle Valo
Sparse warns: drivers/net/wireless/microchip/wilc1000/hif.h:218:35: error: marked inline, but without a definition Remove the inline, it's not needed. Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220801110440.13144-1-kvalo@kernel.org
2022-08-07Merge tag 'bitmap-6.0-rc1' of https://github.com/norov/linuxLinus Torvalds
Pull bitmap updates from Yury Norov: - fix the duplicated comments on bitmap_to_arr64() (Qu Wenruo) - optimize out non-atomic bitops on compile-time constants (Alexander Lobakin) - cleanup bitmap-related headers (Yury Norov) - x86/olpc: fix 'logical not is only applied to the left hand side' (Alexander Lobakin) - lib/nodemask: inline wrappers around bitmap (Yury Norov) * tag 'bitmap-6.0-rc1' of https://github.com/norov/linux: (26 commits) lib/nodemask: inline next_node_in() and node_random() powerpc: drop dependency on <asm/machdep.h> in archrandom.h x86/olpc: fix 'logical not is only applied to the left hand side' lib/cpumask: move some one-line wrappers to header file headers/deps: mm: align MANITAINERS and Docs with new gfp.h structure headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h> headers/deps: mm: Optimize <linux/gfp.h> header dependencies lib/cpumask: move trivial wrappers around find_bit to the header lib/cpumask: change return types to unsigned where appropriate cpumask: change return types to bool where appropriate lib/bitmap: change type of bitmap_weight to unsigned long lib/bitmap: change return types to bool where appropriate arm: align find_bit declarations with generic kernel iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE) lib/test_bitmap: test the tail after bitmap_to_arr64() lib/bitmap: fix off-by-one in bitmap_to_arr64() lib: test_bitmap: add compile-time optimization/evaluations assertions bitmap: don't assume compiler evaluates small mem*() builtins calls net/ice: fix initializing the bitmap in the switch code bitops: let optimize out non-atomic bitops on compile-time constants ...
2022-08-07Merge tag 'for-5.20/fbdev-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev updates from Helge Deller: "The two major changes in this patchset corrects VGA modes, color handling and various other smaller fixes in the Atari framebuffer (by Geert Uytterhoeven), and devm_* conversion, platform data fixes and header cleanups in the imxfb driver (by Uwe Kleine-König). Other small patches clean up code in sa1100fb, cirrusfb and omapfb, fix a refcount leak in amba-clcd (by Liang He), and adds parameter checks to arkfb, i740fb, vt8623fb and s3fb (by Zheyu Ma)" * tag 'for-5.20/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (27 commits) video: fbdev: s3fb: Check the size of screen before memset_io() video: fbdev: arkfb: Check the size of screen before memset_io() video: fbdev: vt8623fb: Check the size of screen before memset_io() video: fbdev: i740fb: Check the argument of i740_calc_vclk() video: fbdev: arkfb: Fix a divide-by-zero bug in ark_set_pixclock() video: fbdev: imxfb: fix return value check in imxfb_probe() video: fbdev: sis: fix typos in SiS_GetModeID() video: fbdev: imxfb: Convert request_mem_region + ioremap to devm_ioremap_resource video: fbdev: imxfb: Fold <linux/platform_data/video-imxfb.h> into only user video: fbdev: imxfb: Drop unused symbols from header video: fbdev: imxfb: Drop platform data support video: fbdev: amba-clcd: Fix refcount leak bugs video: fbdev: omapfb: Unexport omap*_update_window_async() video: fbdev: atari: Remove backward bug-compatibility video: fbdev: atari: Remove unused definitions and variables video: fbdev: atari: Fix VGA modes video: fbdev: atari: Fix TT High video mode vertical refresh video: fbdev: atari: Remove unneeded casts to void * video: fbdev: atari: Remove unneeded casts from void * video: fbdev: atari: Fix ext_setcolreg() ...
2022-08-06Merge tag 's390-5.20-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Rework copy_oldmem_page() callback to take an iov_iter. This includes a few prerequisite updates and fixes to the oldmem reading code. - Rework cpufeature implementation to allow for various CPU feature indications, which is not only limited to hardware capabilities, but also allows CPU facilities. - Use the cpufeature rework to autoload Ultravisor module when CPU facility 158 is available. - Add ELF note type for encrypted CPU state of a protected virtual CPU. The zgetdump tool from s390-tools package will decrypt the CPU state using a Customer Communication Key and overwrite respective notes to make the data accessible for crash and other debugging tools. - Use vzalloc() instead of vmalloc() + memset() in ChaCha20 crypto test. - Fix incorrect recovery of kretprobe modified return address in stacktrace. - Switch the NMI handler to use generic irqentry_nmi_enter() and irqentry_nmi_exit() helper functions. - Rework the cryptographic Adjunct Processors (AP) pass-through design to support dynamic changes to the AP matrix of a running guest as well as to implement more of the AP architecture. - Minor boot code cleanups. - Grammar and typo fixes to hmcdrv and tape drivers. * tag 's390-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits) Revert "s390/smp: enforce lowcore protection on CPU restart" Revert "s390/smp: rework absolute lowcore access" Revert "s390/smp,ptdump: add absolute lowcore markers" s390/unwind: fix fgraph return address recovery s390/nmi: use irqentry_nmi_enter()/irqentry_nmi_exit() s390: add ELF note type for encrypted CPU state of a PV VCPU s390/smp,ptdump: add absolute lowcore markers s390/smp: rework absolute lowcore access s390/setup: rearrange absolute lowcore initialization s390/boot: cleanup adjust_to_uv_max() function s390/smp: enforce lowcore protection on CPU restart s390/tape: fix comment typo s390/hmcdrv: fix Kconfig "its" grammar s390/docs: fix warnings for vfio_ap driver doc s390/docs: fix warnings for vfio_ap driver lock usage doc s390/crash: support multi-segment iterators s390/crash: use static swap buffer for copy_to_user_real() s390/crash: move copy_to_user_real() to crash_dump.c s390/zcore: fix race when reading from hardware system area s390/crash: fix incorrect number of bytes to copy to user space ...
2022-08-06Merge tag 'powerpc-6.0-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add support for syscall stack randomization - Add support for atomic operations to the 32 & 64-bit BPF JIT - Full support for KASAN on 64-bit Book3E - Add a watchdog driver for the new PowerVM hypervisor watchdog - Add a number of new selftests for the Power10 PMU support - Add a driver for the PowerVM Platform KeyStore - Increase the NMI watchdog timeout during live partition migration, to avoid timeouts due to increased memory access latency - Add support for using the 'linux,pci-domain' device tree property for PCI domain assignment - Many other small features and fixes Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A. Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada, Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár, Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu Jianfeng, and Zhouyi Zhou. * tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits) powerpc/64e: Fix kexec build error EDAC/ppc_4xx: Include required of_irq header directly powerpc/pci: Fix PHB numbering when using opal-phbid powerpc/64: Init jump labels before parse_early_param() selftests/powerpc: Avoid GCC 12 uninitialised variable warning powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address powerpc/xive: Fix refcount leak in xive_get_max_prio powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader powerpc/perf: Include caps feature for power10 DD1 version powerpc: add support for syscall stack randomization powerpc: Move system_call_exception() to syscall.c powerpc/powernv: rename remaining rng powernv_ functions to pnv_ powerpc/powernv/kvm: Use darn for H_RANDOM on Power9 powerpc/powernv: Avoid crashing if rng is NULL selftests/powerpc: Fix matrix multiply assist test powerpc/signal: Update comment for clarity powerpc: make facility_unavailable_exception 64s powerpc/platforms/83xx/suspend: Remove write-only global variable powerpc/platforms/83xx/suspend: Prevent unloading the driver powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration ...
2022-08-06Merge tag 'riscv-for-linus-5.20-mw0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Enabling the FPU is now a static_key - Improvements to the Svpbmt support - CPU topology bindings for a handful of systems - Support for systems with 64-bit hart IDs - Many settings have been enabled in the defconfig, including both support for the StarFive systems and many of the Docker requirements There are also a handful of cleanups and improvements, as usual. * tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits) riscv: enable Docker requirements in defconfig riscv: convert the t-head pbmt errata to use the __nops macro riscv: introduce nops and __nops macros for NOP sequences RISC-V: Add fast call path of crash_kexec() riscv: mmap with PROT_WRITE but no PROT_READ is invalid riscv/efi_stub: Add 64bit boot-hartid support on RV64 riscv: cpu: Add 64bit hartid support on RV64 riscv: smp: Add 64bit hartid support on RV64 riscv: spinwait: Fix hartid variable type riscv: cpu_ops_sbi: Add 64bit hartid support on RV64 riscv: dts: sifive: "fix" pmic watchdog node name riscv: dts: canaan: Add k210 topology information riscv: dts: sifive: Add fu740 topology information riscv: dts: sifive: Add fu540 topology information riscv: dts: starfive: Add JH7100 CPU topology RISC-V: Add CONFIG_{NON,}PORTABLE riscv: config: enable SOC_STARFIVE in defconfig riscv: dts: microchip: Add mpfs' topology information riscv: Kconfig.socs: Add comments riscv: Kconfig.erratas: Add comments ...
2022-08-06Revert "iommu/dma: Add config for PCI SAC address trick"Linus Torvalds
This reverts commit 4bf7fda4dce22214c70c49960b1b6438e6260b67. It turns out that it was hopelessly naive to think that this would work, considering that we've always done this. The first machine I actually tested this on broke at bootup, getting to Reached target cryptsetup.target - Local Encrypted Volumes. and then hanging. It's unclear what actually fails, since there's a lot else going on around that time (eg amdgpu probing also happens around that same time, but it could be some other random init thing that didn't complete earlier and just caused the boot to hang at that point). The expectations that we should default to some unsafe and untested mode seems entirely unfounded, and the belief that this wouldn't affect modern systems is clearly entirely false. The machine in question is about two years old, so it's not exactly shiny, but it's also not some dusty old museum piece PDP-11 in a closet. Cc: Robin Murphy <robin.murphy@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: John Garry <john.garry@huawei.com> Cc: Joerg Roedel <jroedel@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-06Merge tag 'for-6.0/dm-changes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull more device mapper updates from Mike Snitzer: - Add flags argument to dm_bufio_client_create and introduce DM_BUFIO_CLIENT_NO_SLEEP flag to have dm-bufio use spinlock rather than mutex for its locking. - Add optional "try_verify_in_tasklet" feature to DM verity target. This feature gives users the option to improve IO latency by using a tasklet to verify, using hashes in bufio's cache, rather than wait to schedule a work item via workqueue. But if there is a bufio cache miss, or an error, then the tasklet will fallback to using workqueue. - Incremental changes to both dm-bufio and the DM verity target to use jump_label to minimize cost of branching associated with the niche "try_verify_in_tasklet" feature. DM-bufio in particular is used by quite a few other DM targets so it doesn't make sense to incur additional bufio cost in those targets purely for the benefit of this niche verity feature if the feature isn't ever used. - Optimize verity_verify_io, which is used by both workqueue and tasklet based verification, if FEC is not configured or tasklet based verification isn't used. - Remove DM verity target's verify_wq's use of the WQ_CPU_INTENSIVE flag since it uses WQ_UNBOUND. Also, use the WQ_HIGHPRI flag if "try_verify_in_tasklet" is specified. * tag 'for-6.0/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm verity: have verify_wq use WQ_HIGHPRI if "try_verify_in_tasklet" dm verity: remove WQ_CPU_INTENSIVE flag since using WQ_UNBOUND dm verity: only copy bvec_iter in verity_verify_io if in_tasklet dm verity: optimize verity_verify_io if FEC not configured dm verity: conditionally enable branching for "try_verify_in_tasklet" dm bufio: conditionally enable branching for DM_BUFIO_CLIENT_NO_SLEEP dm verity: allow optional args to alter primary args handling dm verity: Add optional "try_verify_in_tasklet" feature dm bufio: Add DM_BUFIO_CLIENT_NO_SLEEP flag dm bufio: Add flags argument to dm_bufio_client_create
generated by cgit (git 2.34.1) at 2025-09-14 18:43:23 +0000