summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-12-06net: ethernet: ti: cpsw: fix early budget splitIvan Khoronzhuk
The budget split function requires the phy speed to be known. While ndo open a phy speed identification is postponed till the moment link is up. Hence, move it to appropriate callback, when link is up. Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Fixes: 8feb0a196507 ("net: ethernet: ti: cpsw: split tx budget according between channels") Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net: dsa: mv88e6xxx: add PPU operationsVivien Didelot
Some Marvell chips can enable/disable the PPU on demand. This is needed to access the PHY registers when there is no indirection mechanism. Add two new ppu_enable and ppu_disable ops to describe this and finally get rid of the MV88E6XXX_FLAG_PPU* flags. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net: dsa: mv88e6xxx: add a soft reset operationVivien Didelot
Marvell chips have different way to issue a software reset. Old chips (such as 88E6060) have a reset bit in an ATU control register. Newer chips moved this bit in a Global control register. Chips with controllable PPU should reset the PPU when resetting the switch. Add a new reset operation to implement these differences and introduce a mv88e6xxx_software_reset() helper to wrap it conveniently. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net: dsa: mv88e6xxx: add helper to hardware resetVivien Didelot
Add an helper to toggle the eventual GPIO connected to the reset pin. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net: dsa: mv88e6xxx: add helper to disable portsVivien Didelot
Before resetting a switch, the ports should be set to the Disabled state and the transmit queues should be drained. Add an helper to explicit that. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06Merge branches 'arm/mediatek', 'arm/smmu', 'x86/amd', 's390', 'core' and ↵Joerg Roedel
'arm/exynos' into next
2016-12-06net: ethernet: slicoss: add slicoss gigabit ethernet driverLino Sanfilippo
Add driver for Alacritech gigabit ethernet cards with SLIC (session-layer interface control) technology. The driver provides basic support without SLIC for the following devices: - Mojave cards (single port PCI Gigabit) both copper and fiber - Oasis cards (single and dual port PCI-x Gigabit) copper and fiber - Kalahari cards (dual and quad port PCI-e Gigabit) copper and fiber Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06drm/panel: simple: Add support for AUO G185HAN01Lucas Stach
This adds support for the AU Optronics G185HAN01 18.5" LVDS FullHD TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06drm/panel: simple: Add support for AUO G133HAN01Lucas Stach
This adds support for the AU Optronics G133HAN01 13.3" LVDS FullHD TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06ACPI/IORT: Make dma masks set-up IORT specificLorenzo Pieralisi
The introduction of acpi_dma_configure() allows to configure DMA and related IOMMU for any device that is DMA capable. To achieve that goal it ensures DMA masks are set-up to sane default values before proceeding with IOMMU and DMA ops configuration. On x86/ia64 systems, through acpi_bind_one(), acpi_dma_configure() is called for every device that has an ACPI companion, in that every device is considered DMA capable on x86/ia64 systems (ie acpi_get_dma_attr() API), which has the side effect of initializing dma masks also for pseudo-devices (eg CPUs and memory nodes) and potentially for devices whose dma masks were not set-up before the acpi_dma_configure() API was introduced, which may have noxious side effects. Therefore, in preparation for IORT firmware specific DMA masks set-up, wrap the default DMA masks set-up in acpi_dma_configure() inside an IORT specific wrapper that reverts to a NOP on x86/ia64 systems, restoring the default expected behaviour on x86/ia64 systems and keeping DMA default masks set-up on IORT based (ie ARM) arch configurations. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-06drm/panel: simple: Add more properties to Innolux G121I1-L01Lucas Stach
Convert from a single mode to display timings, which allow to describe the minimum/maximium blanking and clock rates, add enable/disable delays and provide the bus format. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06drm/panel: simple: Add bits-per-component for Sharp LQ123P1JX31zain wang
The Sharp LQ123P1JX31 panel support 8 bits per component. Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06drm/panel: simple: Check against num_timings when setting preferred for timingChen-Yu Tsai
In the loop on .timings, we should check .num_timings to see if it's the only mode specified, not .num_modes, which should be used with .modes. Fixes: cda553725c92 ("drm/panel: simple: Set appropriate mode type") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06drm/panel: Add support for Chunghwa CLAA070WP03XG panelRandy Li
The Chunghwa CLAA070WP03XG is a 7" 1280x800 panel, which can be supported by the simple panel driver. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06net: stmmac: clear reset value of snps, wr_osr_lmt/snps, rd_osr_lmt before ↵Niklas Cassel
writing WR_OSR_LMT and RD_OSR_LMT have a reset value of 1. Since the reset value wasn't cleared before writing, the value in the register would be incorrect if specifying an uneven value for snps,wr_osr_lmt/snps,rd_osr_lmt. Zero is a valid value for the properties, since the databook specifies: maximum outstanding requests = WR_OSR_LMT + 1. We do not want to change the behavior for existing users when the property is missing. Therefore, default to 1 if the property is missing, since that is the same as the reset value. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net: hix5hd2_gmac: add reset control and clock signalsDongpo Li
Add three reset control signals, "mac_core_rst", "mac_ifc_rst" and "phy_rst". The following diagram explained how the reset signals work. SoC |----------------------------------------------------- | ------ | | | cpu | | | ------ | | | | | ------------ AMBA bus | | GMAC | | | ---------------------- | | ------------- mac_core_rst | -------------- | | | |clock and |-------------->| mac core | | | | |reset | | -------------- | | | |generator |---- | | | | | ------------- | | ---------------- | | | | ---------->| mac interface | | | | | mac_ifc_rst | ---------------- | | | | | | | | | | | ------------------ | | | |phy_rst | | RGMII interface | | | | | | ------------------ | | | | ---------------------- | |----------|------------------------------------------| | | | ---------- |--------------------- |PHY chip | ---------- The "mac_core_rst" represents "mac core reset signal", it resets the mac core including packet processing unit, descriptor processing unit, tx engine, rx engine, control unit. The "mac_ifc_rst" represents "mac interface reset signal", it resets the mac interface. The mac interface unit connects mac core and data interface like MII/RMII/RGMII. After we set a new value of interface mode, we must reset mac interface to reload the new mode value. The "mac_core_rst" and "mac_ifc_rst" are both optional to be backward compatible with the hix5hd2 SoC. The "phy_rst" represents "phy reset signal", it does a hardware reset on the PHY chip. This reset signal is optional if the PHY can work well without the hardware reset. Add one more clock signal, the existing is MAC core clock, and the new one is MAC interface clock. The MAC interface clock is optional to be backward compatible with the hix5hd2 SoC. Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net: hix5hd2_gmac: add tx scatter-gather featureDongpo Li
"hisi-gemac-v2" adds the SG/TXCSUM/TSO/UFO features. This patch only adds the SG(scatter-gather) driver for transmitting, the drivers of other features will be submitted later. Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net: hix5hd2_gmac: add generic compatible stringDongpo Li
The "hix5hd2" is SoC name, add the generic ethernet driver name. The "hisi-gemac-v1" is the basic version and "hisi-gemac-v2" adds the SG/TXCSUM/TSO/UFO features. Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net: dsa: mv88e6xxx: Use EDSA on mv88e6097Stefan Eichenberger
Use DSA_TAG_PROTO_EDSA as tag_protocol for the mv88e6097. The initialisation was missing before. Fixes: a1f482aa8c33 ("net: dsa: mv88e6xxx: Move the tagging protocol into info") Signed-off-by: Stefan Eichenberger <stefan.eichenberger@netmodule.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06nvme-fabrics: Add FC LLDD loopback driver to test FC-NVMEJames Smart
Add FC LLDD loopback driver to test FC host and target transport within nvme-fabrics To aid in the development and testing of the lower-level api of the FC transport, this loopback driver has been created to act as if it were a FC hba driver supporting both the host interfaces as well as the target interfaces with the nvme FC transport. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-06drm: Don't block the kworker waiting for mode_config.mutex in output_poll()Chris Wilson
If we cannot acquire the mode_config.mutex immediately, just back off and queue a new attempt after the poll interval. This is mostly to stop the hung task spam when the system is deadlocked, but it will also lessen the load (in such extreme cases). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> [danvet:s/lock/mutex/ per Eric's comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161206113715.30382-1-chris@chris-wilson.co.uk
2016-12-06drm: Return -ENOTSUPP when called for KMS cap with a non-KMS driverMichel Dänzer
This is an attempt to make the previous fix a bit more robust going forward. v2: * Only allow DRM_CAP_TIMESTAMP_MONOTONIC with UMS drivers (Daniel Vetter, Alex Deucher) * Different logic to keep DRM_CAP_TIMESTAMP_MONOTONIC separate from the other caps (Daniel Vetter) Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161201073731.5716-1-michel@daenzer.net
2016-12-06uio-hv-generic: new userspace i/o driver for VMBusStephen Hemminger
This is a new driver to enable userspace networking on VMBus. It is based largely on the similar driver that already exists for PCI, and earlier work done by Brocade to support DPDK. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06vmbus: add support for dynamic device id'sStephen Hemminger
This patch adds sysfs interface to dynamically bind new UUID values to existing VMBus device. This is useful for generic UIO driver to act similar to uio_pci_generic. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06hv: change clockevents unbind tacticsVitaly Kuznetsov
To get prepared to CPU offlining support we need co change the way how we unbind clockevent devices. As one CPU may go online/offline multiple times we need to bind it in hv_synic_init() and unbind it in hv_synic_cleanup(). There is an additional corner case: when we unload the module completely we need to switch to some other clockevent mechanism before stopping VMBus or we will hang. We can't call hv_synic_cleanup() before unloading VMBus as we won't be able to send UNLOAD request and get a response so hv_synic_clockevents_cleanup() has to live. Luckily, we can always call clockevents_unbind_device(), even if it wasn't bound before and there is no issue if we call it twice. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels()Vitaly Kuznetsov
"kernel BUG at drivers/hv/channel_mgmt.c:350!" is observed when hv_vmbus module is unloaded. BUG_ON() was introduced in commit 85d9aa705184 ("Drivers: hv: vmbus: add an API vmbus_hvsock_device_unregister()") as vmbus_free_channels() codepath was apparently forgotten. Fixes: 85d9aa705184 ("Drivers: hv: vmbus: add an API vmbus_hvsock_device_unregister()") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06hyperv: Fix spelling of HV_UNKOWNHaiyang Zhang
Changed it to HV_UNKNOWN Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06mei: bus: enable non-blocking RXAlexander Usyskin
Enable non-blocking receive for drivers on mei bus, this allows checking for data availability by mei client drivers. This is most effective for fixed address clients, that lacks flow control. This function adds new API function mei_cldev_recv_nonblock(), it retuns -EGAIN if function will block. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06mei: fix the back to back interrupt handlingAlexander Usyskin
Since the newer HW sports two interrupts causes we cannot just simply acknowledge the interrupts directly in the quick handler and store the cause in the member variable, as the cause will be overridden upon next interrupt while the interrupt thread was not yet scheduled handling the previous interrupt. The simple fix is to disable interrupts in quick handler and acknowledge and enabled them in the interrupt thread. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06mei: synchronize irq before initiating a reset.Tomas Winkler
We need to synchronize irqs before issuing reset to make sure that the clients communication is concluded and doesn't leak to the reset flow and confusing the state machine. This issue is happening during suspend/resume stress testing. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: libcfs: remove lnet upcall codeAlexander Zarochentsev
Removing lnet upcall infrastructure completely as nobody uses it anymore. The upcall causes a delay before calling BUG() and might even cause a hang making getting a crash dump unreliable or containing outdated info. Signed-off-by: Alexander Zarochentsev <alexander.zarochentsev@seagate.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8418 Seagate-bug-id: MRP-2939 Reviewed-on: http://review.whamcloud.com/21440 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: remove set but unused variablesYang Sheng
Remove set but unused variables in nidstring.c and osc_request.c as reported by make W=1. Signed-off-by: Yang Sheng <yang.sheng@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8378 Reviewed-on: http://review.whamcloud.com/23221 Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: Emoly Liu <emoly.liu@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: osc: set lock data for readahead lockJinshan Xiong
If osc_io_readahead() finds a lock that belongs to the previous instance of osc_object, the lock data pointer will be null. It has to instantiate with new instance otherwise those pages won't be destroyed at lock cancel, and then finally hit the assertion in osc_req_attr_set(). This patch revised dlmlock_at_pgoff() to call osc_match_base() to find caching locks for readahead. And new osc_object will be set to the lock if it doesn't have one yet. Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8005 Reviewed-on: http://review.whamcloud.com/19453 Reviewed-by: Bobi Jam <bobijam@hotmail.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: import: don't reconnect during connect interpretMikhal Pershin
The import connect flags might be cleared by ptlrpc_connect_import() wrongly if there is still connect interpret function is running. Use imp_connected boolean variable to indicate that we are still interpretting connect reply and don't try to reconnect until it ends. Signed-off-by: Mikhal Pershin <mike.pershin@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7558 Reviewed-on: http://review.whamcloud.com/19312 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: clio: remove mtime check in vvp_io_fault_start()Bobi Jam
In fault IO initialization, inode's mtime is saved, and after getting locks, when the IO is about to start, vvp_io_fault_start() checks the mtime's intactness. It's a false alarm, since the timestamp from MDS could be stale, we maintain mtime mainly on OST objects, and if the check in vvp_io_fault_start() happens before mtime on OST objects are merged, it will get wrong timestamp from the inode, even the timestamp it fetched in vvp_io_fault_init() could be wrong in the first place. This patch remove the mtime check in vvp_io_fault_start(). Signed-off-by: Bobi Jam <bobijam.xu@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7198 Reviewed-on: http://review.whamcloud.com/19162 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: llite: Invoke file_update_time in page_mkwriteYang Sheng
Only update file times if page_mkwrite is not set. So we need call file_update_time by ourselves. Signed-off-by: Yang Sheng <yang.sheng@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1118 Reviewed-on: http://review.whamcloud.com/18683 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Niu Yawei <yawei.niu@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: rpc: increase bulk sizeJinshan Xiong
To make the ptlrpc be able to size 16MB IO Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com> Signed-off-by: Gu Zheng <gzheng@ddn.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7990 Reviewed-on: http://review.whamcloud.com/19366 Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: statahead: set sai_index_wait with lli_sa_lock heldFan Yong
It is the sponsor thread of the statahead thread to update the sai::sai_index_wait. Originally, it didn't hold the lli_sa_lock when did that. Becuase of out-of-order execution others may miss to wakeup such thread. On the other hand, if the statahead RPC gets failure, it should wakeup the sponsor thread, not the statahead thread. Signed-off-by: Li Xi <lixi@ddn.com> Signed-off-by: Fan Yong <fan.yong@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7828 Reviewed-on: http://review.whamcloud.com/18499 Reviewed-by: Lai Siyao <lai.siyao@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: obdclass: limit lu_site hash table size on clientsLi Dongyang
Allocating a big hash table using the current formula does not really work for clients. We will create new hash table for each mount on a single client which is a lot of memory more than expected. This patch limits the hash table up to 8M for clients, which has 524288 entries. Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7689 Reviewed-on: http://review.whamcloud.com/18048 Reviewed-by: Fan Yong <fan.yong@intel.com> Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: llite: Add client mount opt to ignore suppress_pingsWally Wang
When Lustre servers enable 'suppress_pings', all clients will stop pinging. However, some clients may not have external mechanism to notify Lustre servers for node death and therefore need to preserve the Lustre ping. This patch provides a mount option 'always_ping' so that the client will not stop pinging even if the server has enabled 'suppress_pings'. Signed-off-by: Wally Wang <wang@cray.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6391 Reviewed-on: http://review.whamcloud.com/14127 Reviewed-by: Li Wei <wei.g.li@intel.com> Reviewed-by: Chris Horn <hornc@cray.com> Reviewed-by: Lai Siyao <lai.siyao@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: clio: revise read ahead algorithmJinshan Xiong
ras_window_len should only be updated in ras_update() by read pattern and it can't be adjusted in ll_readahead() at all; ras_consecutive_pages is used to detect read pattern from mmap. It will be used to increase read ahead window length gradually. Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5505 Reviewed-on: http://review.whamcloud.com/11528 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Bobi Jam <bobijam@hotmail.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: obdclass: lu_site_purge() to handle purge-allAlex Zhuravlev
if the callers wants to purge all objects, then scanning should start from the first bucket. Signed-off-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7038 Reviewed-on: http://review.whamcloud.com/18505 Reviewed-by: Mike Pershin <mike.pershin@intel.com> Reviewed-by: Faccini Bruno <bruno.faccini@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: llite: ll_dir_ioctl cleanup of redundant comparisonsParinay Kondekar
In ll_dir_ioctl() two identical comparisions are present for return code (rc) of ll_dir_getstripe(). This patch removes the other inside if( ) condition which is not necessary. Signed-off-by: Parinay Kondekar <parinay.kondekar@seagate.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6512 Reviewed-on: http://review.whamcloud.com/18027 Reviewed-by: Bobi Jam <bobijam@hotmail.com> Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: libcfs: report hnode value for cfs_hash_putrefYang Sheng
Add more debugging info. Signed-off-by: Yang Sheng <yang.sheng@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7084 Reviewed-on: http://review.whamcloud.com/17673 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Fan Yong <fan.yong@intel.com> Reviewed-by: Mike Pershin <mike.pershin@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: mdt: fail FMODE_WRITE open if the client is read onlyLi Dongyang
O_WRONLY/O_RDWR open on a file will get EROFS on a read only client, but the rpc gets sent to the mdt anyway. mdt will increase the mot_write_count of the mdt object, blocking subsequent FMODE_EXEC open to the same file. This patch makes sure we fail the FMODE_WRITE open with EROFS on the client straight away without sending the rpc to mdt. Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7727 Reviewed-on: http://review.whamcloud.com/18242 Reviewed-by: Ian Costello <icostello@ddn.com> Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com> Reviewed-by: Yang Sheng <yang.sheng@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: llog: reset llog bitmapwang di
Once update request fails due to eviction or other failures, all of update request in the sending list should return fail, because after the failure, the update log in the following request will have wrong llog bitmap. Signed-off-by: wang di <di.wang@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7039 Reviewed-on: http://review.whamcloud.com/16969 Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Lai Siyao <lai.siyao@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: mdt: race between open and migratewang di
During intent open, it was found that if the parent has been migrated to another MDT, it should retry the open request with the new object, so it needs to keep the old object in the orphan list, which will be cleanup during next recovery. Note: if the client still using the old FID after next recovery, it will return -ENOENT for the application. Also enqueue the lease lock of the migrating file, then compare the lease before migration to make sure no other clients open the file at the same time. Signed-off-by: wang di <di.wang@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6475 Reviewed-on: http://review.whamcloud.com/14497 Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: osc: fix debug log message formattingAshish Purkar
Corrected newline specifier in debug log message. Signed-off-by: Ashish Purkar <ashish.purkar@seagate.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7029 Reviewed-on: http://review.whamcloud.com/16046 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: llite: clear LLIF_DATA_MODIFIED in atomicJinshan Xiong
This flag should be cleared atomically after the op_data flag MDS_DATA_MODIFIED is packed. Otherwise, if there exists an operation to dirty the file again, the state may be missed on the MDT. Stop using spin lock lli_lock to protect operations of changing file flags; using bit operations instead. Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com> Signed-off-by: James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6377 Reviewed-on: http://review.whamcloud.com/14100 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06staging: lustre: cl_page: fix a typo in commentsDan Carpenter
We want to "sever" all the ways to get a new pointer to "pg". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-17 06:22:21 +0000