summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-12-02Input: synaptics-rmi4 - allow to add attention dataBenjamin Tissoires
The HID implementation of RMI4 provides the data during the interrupt (in the input report). We need to provide a way for this transport driver to provide the attention data while calling an IRQ. We use a fifo in rmi_core to not lose any incoming event. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-02Input: synaptics-rmi4 - f03 - grab data passed by transport deviceDennis Wassenberg
First check if there are data available passed by the transport device. If data available use these data. If there are no data available try to read the rmi block if dsata are passed this way. This is the way the other rmi function handlers will do this. This patch is needed on HID devices because the firmware reads F03 data registers and adds them to the HID attention report. Reading those registers from the driver after the firmware read them will result in invalid data. Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-02Input: synaptics-rmi4 - add support for F03Lyude Paul
This adds basic functionality for PS/2 passthrough on Synaptics Touchpads using RMI4 through smbus. Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Lyude Paul <thatslyude@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-02remoteproc: qcom: mdt_loader: add include for sizesStanimir Varbanov
Add linux/sizes.h to prevent build failure on non ARM architectures as: CC [M] drivers/remoteproc/qcom_mdt_loader.o In file included from include/linux/cache.h:4:0, from include/linux/printk.h:8, from include/linux/kernel.h:13, from include/asm-generic/bug.h:13, from arch/x86/include/asm/bug.h:35, from include/linux/bug.h:4, from include/linux/thread_info.h:11, from arch/x86/include/asm/elf.h:7, from include/linux/elf.h:4, from drivers/remoteproc/qcom_mdt_loader.c:18: drivers/remoteproc/qcom_mdt_loader.c: In function ‘qcom_mdt_parse’: drivers/remoteproc/qcom_mdt_loader.c:90:52: error: ‘SZ_4K’ undeclared (first use in this function) Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-12-02hwmon: (adt7411) update to new hwmon registration APIMichael Walle
This is also a preparation for to support more properties like min, max and alarm. Signed-off-by: Michael Walle <michael@walle.cc> [groeck: Minor alignment changes] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-12-02hwmon: (via-cputemp) Remove pointless CPU check on each CPUThomas Gleixner
The check loop for the cpu type is pointless as we already have a cpu model match before that. The only thing which is not covered by that check would be a smp system with two different cores. Not likely to happen. Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-12-02hwmon: (mcp3021) add devicetree supportClemens Gruber
Support setting the reference voltage from the device tree. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-12-02hwmon: (mcp3021) replace S_IRUGO with 0444Clemens Gruber
Replace S_IRUGO with the better readable 0444. This fixes a checkpatch warning. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-12-02hwmon: (lm87) Use hwmon to create the sysfs groupsJason Gunthorpe
This is the expected thing for a hwmon driver to do, this changes the sysfs paths from, say: /sys/bus/i2c/devices/0-002c/temp1_input to: /sys/bus/i2c/devices/0-002c/hwmon/hwmon0/temp1_input Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-12-02hwmon: (adm1275) Enable adm1278 VOUT samplingYi Li
The adm1278 can optionally monitor the VOUT pin. This functionality is not enabled at reset, so PMON_CONFIG needs to be modified in order to enable it. Signed-off-by: Yi Li <adamliyi@msn.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-12-02hwmon: Add tc654 driverChris Packham
Add support for the tc654 and tc655 fan controllers from Microchip. http://ww1.microchip.com/downloads/en/DeviceDoc/20001734C.pdf Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Rob Herring <robh@kernel.org> [groeck: Fixed continuation line alignments] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-12-02hwmon: (amc6821) sign extension temperatureJared Bents
Converts the unsigned temperature values from the i2c read to be sign extended as defined in the datasheet so that negative temperatures are properly read. Fixes: 28e6274d8fa67 ("hwmon: (amc6821) Avoid forward declaration") Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com> Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com> [groeck: Dropped unnecessary continuation line] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-12-02hwmon: (scpi) Fix module autoloadJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/hwmon/scpi-hwmon.ko | grep alias $ After this patch: $ modinfo drivers/hwmon/scpi-hwmon.ko | grep alias alias: of:N*T*Carm,scpi-sensorsC* alias: of:N*T*Carm,scpi-sensors Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Fixes: ea98b29a05e9c ("hwmon: Support sensors exported via ARM SCP interface") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-12-02md/r5cache: run_no_space_stripes() when R5C_LOG_CRITICAL == 0Song Liu
With writeback cache, we define log space critical as free_space < 2 * reclaim_required_space So the deassert of R5C_LOG_CRITICAL could happen when 1. free_space increases 2. reclaim_required_space decreases Currently, run_no_space_stripes() is called when 1 happens, but not (always) when 2 happens. With this patch, run_no_space_stripes() is call when R5C_LOG_CRITICAL is cleared. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Lots more phydev and probe error path leaks in various drivers by Johan Hovold. 2) Fix race in packet_set_ring(), from Philip Pettersson. 3) Use after free in dccp_invalid_packet(), from Eric Dumazet. 4) Signnedness overflow in SO_{SND,RCV}BUFFORCE, also from Eric Dumazet. 5) When tunneling between ipv4 and ipv6 we can be left with the wrong skb->protocol value as we enter the IPSEC engine and this causes all kinds of problems. Set it before the output path does any dst_output() calls, from Eli Cooper. 6) bcmgenet uses wrong device struct pointer in DMA API calls, fix from Florian Fainelli. 7) Various netfilter nat bug fixes from FLorian Westphal. 8) Fix memory leak in ipvlan_link_new(), from Gao Feng. 9) Locking fixes, particularly wrt. socket lookups, in l2tp from Guillaume Nault. 10) Avoid invoking rhash teardowns in atomic context by moving netlink cb->done() dump completion from a worker thread. Fix from Herbert Xu. 11) Buffer refcount problems in tun and macvtap on errors, from Jason Wang. 12) We don't set Kconfig symbol DEFAULT_TCP_CONG properly when the user selects BBR. Fix from Julian Wollrath. 13) Fix deadlock in transmit path on altera TSE driver, from Lino Sanfilippo. 14) Fix unbalanced reference counting in dsa_switch_tree, from Nikita Yushchenko. 15) tc_tunnel_key needs to be properly exported to userspace via uapi, fix from Roi Dayan. 16) rds_tcp_init_net() doesn't unregister notifier in error path, fix from Sowmini Varadhan. 17) Stale packet header pointer access after pskb_expand_head() in genenve driver, fix from Sabrina Dubroca. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits) net: avoid signed overflows for SO_{SND|RCV}BUFFORCE geneve: avoid use-after-free of skb->data tipc: check minimum bearer MTU net: renesas: ravb: unintialized return value sh_eth: remove unchecked interrupts for RZ/A1 net: bcmgenet: Utilize correct struct device for all DMA operations NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040 cdc_ether: Fix handling connection notification ip6_offload: check segs for NULL in ipv6_gso_segment. RDS: TCP: unregister_netdevice_notifier() in error path of rds_tcp_init_net Revert: "ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()" ipv6: Set skb->protocol properly for local output ipv4: Set skb->protocol properly for local output packet: fix race condition in packet_set_ring net: ethernet: altera: TSE: do not use tx queue lock in tx completion handler net: ethernet: altera: TSE: Remove unneeded dma sync for tx buffers net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks net: ethernet: stmmac: platform: fix outdated function header net: ethernet: stmmac: dwmac-meson8b: fix probe error path net: ethernet: stmmac: dwmac-generic: fix probe error path ...
2016-12-02geneve: avoid use-after-free of skb->dataSabrina Dubroca
geneve{,6}_build_skb can end up doing a pskb_expand_head(), which makes the ip_hdr(skb) reference we stashed earlier stale. Since it's only needed as an argument to ip_tunnel_ecn_encap(), move this directly in the function call. Fixes: 08399efc6319 ("geneve: ensure ECN info is handled properly in all tx/rx paths") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02Merge tag 'linux-can-fixes-for-4.9-20161201' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-12-02 this is a pull request for net/master. There are two patches by Stephane Grosjean, who adds support for the new PCAN-USB X6 USB interface to the pcan_usb driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: renesas: ravb: unintialized return valueDan Carpenter
We want to set the other "err" variable here so that we can return it later. My version of GCC misses this issue but I caught it with a static checker. Fixes: 9f70eb339f52 ("net: ethernet: renesas: ravb: fix fixed-link phydev leaks") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02Merge tag 'wireless-drivers-next-for-davem-2016-12-01' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.10 Major changes: rsi * filter rx frames * configure tx power * make it possible to select antenna * support 802.11d brcmfmac * cleanup of scheduled scan code * support for bcm43341 chipset with different chip id * support rev6 of PCIe device interface ath10k * add spectral scan support for QCA6174 and QCA9377 families * show used tx bitrate with 10.4 firmware wil6210 * add power save mode support * add abort scan functionality * add support settings retry limit for short frames bcma * add Dell Inspiron 3148 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02sh_eth: remove unchecked interrupts for RZ/A1Chris Brandt
When streaming a lot of data and the RZ/A1 can't keep up, some status bits will get set that are not being checked or cleared which cause the following messages and the Ethernet driver to stop working. This patch fixes that issue. irq 21: nobody cared (try booting with the "irqpoll" option) handlers: [<c036b71c>] sh_eth_interrupt Disabling IRQ #21 Fixes: db893473d313a4ad ("sh_eth: Add support for r7s72100") Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: bcmgenet: Utilize correct struct device for all DMA operationsFlorian Fainelli
__bcmgenet_tx_reclaim() and bcmgenet_free_rx_buffers() are not using the same struct device during unmap that was used for the map operation, which makes DMA-API debugging warn about it. Fix this by always using &priv->pdev->dev throughout the driver, using an identical device reference for all map/unmap calls. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: mvneta: Add network support for Armada 3700 SoCMarcin Wojtas
Armada 3700 is a new ARMv8 SoC from Marvell using same network controller as older Armada 370/38x/XP. There are however some differences that needed taking into account when adding support for it: * open default MBUS window to 4GB of DRAM - Armada 3700 SoC's Mbus configuration for network controller has to be done on two levels: global and per-port. The first one is inherited from the bootloader. The latter can be opened in a default way, leaving arbitration to the bus controller. Hence filled mbus_dram_target_info structure is not needed * make per-CPU operation optional - Recent patches adding RSS and XPS support for Armada 38x/XP enabled per-CPU operation of the controller by default. Contrary to older SoC's Armada 3700 SoC's network controller is not capable of per-CPU processing due to interrupt lines' connectivity. This patch restores non-per-CPU operation, which is now optional and depends on neta_armada3700 flag value in mvneta_port structure. In order not to complicate the code, separate interrupt subroutine is implemented. For now, on the Armada 3700, RSS is disabled as the current implementation depend on the per cpu interrupts. [gregory.clement@free-electrons.com: extract from a larger patch, replace some ifdef and port to net-next for v4.10] Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: mvneta: Only disable mvneta_bm for 64-bitsGregory CLEMENT
Actually only the mvneta_bm support is not 64-bits compatible. The mvneta code itself can run on 64-bits architecture. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: mvneta: Convert to be 64 bits compatibleMarcin Wojtas
Prepare the mvneta driver in order to be usable on the 64 bits platform such as the Armada 3700. [gregory.clement@free-electrons.com]: this patch was extract from a larger one to ease review and maintenance. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: mvneta: Use cacheable memory to store the rx buffer virtual addressGregory CLEMENT
Until now the virtual address of the received buffer were stored in the cookie field of the rx descriptor. However, this field is 32-bits only which prevents to use the driver on a 64-bits architecture. With this patch the virtual address is stored in an array not shared with the hardware (no more need to use the DMA API). Thanks to this, it is possible to use cache contrary to the access of the rx descriptor member. The change is done in the swbm path only because the hwbm uses the cookie field, this also means that currently the hwbm is not usable in 64-bits. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Jisheng Zhang <jszhang@marvell.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: mvneta: Do not allocate buffer in rxq init with HWBMGregory CLEMENT
For HWBM all buffers are allocated in mvneta_bm_construct() and in runtime they are put into descriptors by hardware. There is no need to fill them at this point. Suggested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: mvneta: Optimize rx path for small frameGregory CLEMENT
For small frame reuse the phys_addr variable instead of accessing the uncacheable value in the rx descriptor. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040Daniele Palmas
This patch adds support for PID 0x1040 of Telit LE922A. The qmi adapter requires to have DTR set for proper working, so QMI_WWAN_QUIRK_DTR has been enabled. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02cdc_ether: Fix handling connection notificationKristian Evensen
Commit bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling") introduced a work-around in usbnet_cdc_status() for devices that exported cdc carrier on twice on connect. Before the commit, this behavior caused the link state to be incorrect. It was assumed that all CDC Ethernet devices would either export this behavior, or send one off and then one on notification (which seems to be the default behavior). Unfortunately, it turns out multiple devices sends a connection notification multiple times per second (via an interrupt), even when connection state does not change. This has been observed with several different USB LAN dongles (at least), for example 13b1:0041 (Linksys). After bfe9b9d2df66, the link state has been set as down and then up for each notification. This has caused a flood of Netlink NEWLINK messages and syslog to be flooded with messages similar to: cdc_ether 2-1:2.0 eth1: kevent 12 may have been dropped This commit fixes the behavior by reverting usbnet_cdc_status() to how it was before bfe9b9d2df66. The work-around has been moved to a separate status-function which is only called when a known, affect device is detected. v1->v2: * Do not open-code netif_carrier_ok() (thanks Henning Schild). * Call netif_carrier_off() instead of usb_link_change(). This prevents calling schedule_work() twice without giving the work queue a chance to be processed (thanks Bjørn Mork). Fixes: bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling") Reported-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02mlx4: fix use-after-free in mlx4_en_fold_software_stats()Eric Dumazet
My recent commit to get more precise rx/tx counters in ndo_get_stats64() can lead to crashes at device dismantle, as Jesper found out. We must prevent mlx4_en_fold_software_stats() trying to access tx/rx rings if they are deleted. Fix this by adding a test against priv->port_up in mlx4_en_fold_software_stats() Calling mlx4_en_fold_software_stats() from mlx4_en_stop_port() allows us to eventually broadcast the latest/current counters to rtnetlink monitors. Fixes: 40931b85113d ("mlx4: give precise rx/tx bytes/packets counters") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-and-bisected-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Saeed Mahameed <saeedm@dev.mellanox.co.il> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: thunderx: Fix transmit queue timeout issueSunil Goutham
Transmit queue timeout issue is seen in two cases - Due to a race condition btw setting stop_queue at xmit() and checking for stopped_queue in NAPI poll routine, at times transmission from a SQ comes to a halt. This is fixed by using barriers and also added a check for SQ free descriptors, incase SQ is stopped and there are only CQE_RX i.e no CQE_TX. - Contrary to an assumption, a HW errata where HW doesn't stop transmission even though there are not enough CQEs available for a CQE_TX is not fixed in T88 pass 2.x. This results in a Qset error with 'CQ_WR_FULL' stalling transmission. This is fixed by adjusting RXQ's RED levels for CQ level such that there is always enough space left for CQE_TXs. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02drm/etnaviv: move linear window on MC1.0 parts if necessaryLucas Stach
On i.MX6SX the physical memory is placed above the 2GB mark, so the GPU linear window has to be moved for the GPU to work at all. This doesn't mix with the FAST_CLEAR feature, as the TS unit doesn't take the linear window offset into account and will corrupt memory when used with a non-zero offset. Move the linear window if it's necessary for the GPU to work, but avoid announcing FAST_CLEAR support to userspace in this case. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Marek Vasut <marex@denx.de>
2016-12-02drm/etnaviv: don't invoke OOM killer from dump codeLucas Stach
The dumper is only a debugging aid so we don't want to invoke the OOM killer if buffer for the potentially large GPU state can't be vmalloced. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-12-02drm/etnaviv: fix gem_prime_get_sg_table to return new SG tableLucas Stach
The object internal SG table must not be returned, as the caller will take ownership of the returned table. Construct a new table from the object pages and return this one instead. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-12-02drm/etnaviv: Allow DRAW_INSTANCED commandsWladimir J. van der Laan
Vivante GPUs with HALTI0 feature support a DRAW_INSTANCED command in the command stream to draw a number of instances of the same geometry. The information that has been figured out about the command can be found here: https://github.com/etnaviv/etna_viv/blob/master/rnndb/cmdstream.xml#L270 This command is not allowed currently by the DRM driver because it was not known before. This patch enables parsing it in command streams and allows using it by userspace drivers. Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-12-02drm/etnaviv: implement dma-buf mmapLucas Stach
This adds the required boilerplate to allow direct mmap of exported etnaviv BOs. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-12-02net/mlx5e: Support adding ingress tc rule when egress device flag is setHadar Hen Zion
When ndo_setup_tc is called with an egress_dev flag set, it means that the ndo call was executed on the mirred action (egress) device and not on the ingress device. In order to support this kind of ndo_setup_tc call, and insert the correct decap rule to the hardware, the uplink device on the same eswitch should be found. Currently, we use this resolution between the mirred device and the uplink on the same eswitch to offload vxlan shared device decap rules. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net/mlx5e: Save the represntor netdevice as part of the representorHadar Hen Zion
Replace the representor private data to a net_device pointer holding the representor netdevice, instead of void pointer holding mlx5e_priv. It will be used by a new eswitch service function, returning the uplink representor netdevice. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net/mlx5e: Bring back representor's ndos that were accidentally removedHadar Hen Zion
The VF Representor udp tunnel ndo entries were removed by mistake, return them. Fixes: 370bad0f9a52 ('net/mlx5e: Support HW (offloaded) and SW counters for SRIOV switchdev mode') Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02qed: Add iSCSI out of order packet handling.Yuval Mintz
This patch adds out of order packet handling for hardware offloaded iSCSI. Out of order packet handling requires driver buffer allocation and assistance. Signed-off-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02qed: Add support for hardware offloaded iSCSI.Yuval Mintz
This adds the backbone required for the various HW initalizations which are necessary for the iSCSI driver (qedi) for QLogic FastLinQ 4xxxx line of adapters - FW notification, resource initializations, etc. Signed-off-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "Here is the revert for the regression of the i2c-octeon driver I mentioned last time. I wished for a bit more feedback, but all people working actively on it are in need of this patch, so here it goes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: octeon: thunderx: Limit register access retries"
2016-12-02net: ethernet: altera: TSE: do not use tx queue lock in tx completion handlerLino Sanfilippo
The driver already uses its private lock for synchronization between xmit and xmit completion handler making the additional use of the xmit_lock unnecessary. Furthermore the driver does not set NETIF_F_LLTX resulting in xmit to be called with the xmit_lock held and then taking the private lock while xmit completion handler does the reverse, first take the private lock, then the xmit_lock. Fix these issues by not taking the xmit_lock in the tx completion handler. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: ethernet: altera: TSE: Remove unneeded dma sync for tx buffersLino Sanfilippo
An explicit dma sync for device directly after mapping as well as an explicit dma sync for cpu directly before unmapping is unnecessary and costly on the hotpath. So remove these calls. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: atarilance: use %8ph for printing hex stringRasmus Villemoes
This is already using the %pM printf extension; might as well also use %ph to make the code smaller. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net/mlx5e: skip loopback selftest with !CONFIG_INETArnd Bergmann
When CONFIG_INET is disabled, the new selftest results in a link error: drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.o: In function `mlx5e_test_loopback': en_selftest.c:(.text.mlx5e_test_loopback+0x2ec): undefined reference to `ip_send_check' en_selftest.c:(.text.mlx5e_test_loopback+0x34c): undefined reference to `udp4_hwcsum' This hides the specific test in that configuration. Fixes: 0952da791c97 ("net/mlx5e: Add support for loopback selftest") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02drm/vmwgfx: Switch to mode_cmd2Daniel Vetter
Surprisingly few changes needed to make it happen. Compile-tested only. The idea is that this replaces the 2 patches from Ville's big fb->format patch series as a prep patch. Only impact to later patches should be the one instace added in this patch where we look at fb->pixel_format (instead of fb->bpp and fb->depth), so minor adjustements in the cocci-generated patches needed. v2: Restore pitch computation in vmw_fb_kms_framebuffer (Sinclair). Cc: ville.syrjala@linux.intel.com Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: linux-graphics-maintainer@vmware.com Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161202070740.31689-1-daniel.vetter@ffwll.ch
2016-12-02drm/vgem: Use ww_mutex_(un)lock even with a NULL contextNicolai Hähnle
v2: use resv->lock instead of resv->lock.base (Christian König) Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Maarten Lankhorst <dev@mblankhorst.nl> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Nicolai Hähnle <Nicolai.Haehnle@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1480601214-26583-2-git-send-email-nhaehnle@gmail.com
2016-12-02bpf, xdp: drop rcu_read_lock from bpf_prog_run_xdp and move to callerDaniel Borkmann
After 326fe02d1ed6 ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock"), the rcu_read_lock() in bpf_prog_run_xdp() is superfluous, since callers need to hold rcu_read_lock() already to make sure BPF program doesn't get released in the background. Thus, drop it from bpf_prog_run_xdp(), as it can otherwise be misleading. Still keeping the bpf_prog_run_xdp() is useful as it allows for grepping in XDP supported drivers and to keep the typecheck on the context intact. For mlx4, this means we don't have a double rcu_read_lock() anymore. nfp can just make use of bpf_prog_run_xdp(), too. For qede, just move rcu_read_lock() out of the helper. When the driver gets atomic replace support, this will move to call-sites eventually. mlx5 needs actual fixing as it has the same issue as described already in 326fe02d1ed6 ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock"), that is, we're under RCU bh at this time, BPF programs are released via call_rcu(), and call_rcu() != call_rcu_bh(), so we need to properly mark read side as programs can get xchg()'ed in mlx5e_xdp_set() without queue reset. Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net/mlx5e: Remove flow encap entry in the correct placeRoi Dayan
Handling flow encap entry should be inside tc del flow and is only relevant for offloaded eswitch TC rules. Fixes: 11a457e9b6c1 ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-19 11:26:01 +0000