summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-08-04Input: silead - remove some dead codeDan Carpenter
buf[0] is an unsigned char. touch_nr is an int. The test for negative here doesn't make sense so I have removed it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-04Input: sis-i2c - select CONFIG_CRC_ITU_TArnd Bergmann
The newly added sis_i2c driver fails to link without the CRC_ITU_T driver enabled: drivers/input/touchscreen/sis_i2c.o: In function `sis_ts_irq_handler': sis_i2c.c:(.text+0xc0): undefined reference to `crc_itu_t' This adds a Kconfig select statement. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: a485cb037fe6 ("Input: add driver for SiS 9200 family I2C touchscreen controllers") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-04Merge branches 'misc' and 'rxe' into k.o/for-4.8-1Doug Ledford
2016-08-04Soft RoCE driverMoni Shoua
Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-04nvme-rdma: Remove unused includesSagi Grimberg
Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Steve Wise <swise@opengridcomputing.com>
2016-08-04nvme-rdma: start async event handler after reconnecting to a controllerSagi Grimberg
When we reset or reconnect to a controller, we are cancelling the async event handler so we can safely re-establish resources, but we need to remember to start it again when we successfully reconnect. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-04nvmet: Fix controller serial number inconsistencySagi Grimberg
The host is allowed to issue identify as many times as it wants, we need to stay consistent when reporting the serial number for a given controller. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-04nvmet-rdma: Don't use the inline buffer in order to avoid allocation for ↵Sagi Grimberg
small reads Under extreme conditions this might cause data corruptions. By doing that we we repost the buffer and then post this buffer for the device to send. If we happen to use shared receive queues the device might write to the buffer before it sends it (there is no ordering between send and recv queues). Without SRQs we probably won't get that if the host doesn't mis-behave and send more than we allowed it, but relying on that is not really a good idea. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-04nvmet-rdma: Correctly handle RDMA device hot removalSagi Grimberg
When configuring a device attached listener, we may see device removal events. In this case we return a non-zero return code from the cm event handler which implicitly destroys the cm_id. It is possible that in the future the user will remove this listener and by that trigger a second call to rdma_destroy_id on an already destroyed cm_id -> BUG. In addition, when a queue bound (active session) cm_id generates a DEVICE_REMOVAL event we must guarantee all resources are cleaned up by the time we return from the event handler. Introduce nvmet_rdma_device_removal which addresses (or at least attempts to) both scenarios. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-04dm raid: fix use of wrong status char during resynchronizationHeinz Mauelshagen
During a resynchronization, device status char 'a' is output on the raid status line for every device of a RAID set. It changes from 'a' to 'A' (unless device failure) when the resynchronization completes. Interrupting and restarting a resynchronization, by reloading the DM table, erroneously lead to status char 'A'. Fix this by avoiding setting the MD_RECOVERY_REQUESTED flag in raid_preresume(). Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-04Merge tag 'media/v4.8-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media DocBook removal and some fixups from Mauro Carvalho Chehab: - removal of the media DocBook (since it's all in Sphinx now) - videobuf2: Fix an allocation regression - a few fixes related to the CEC drivers * tag 'media/v4.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] cec: fix off-by-one memset [media] staging: add MEDIA_SUPPORT dependency [media] vivid: don't handle CEC_MSG_SET_STREAM_PATH [media] media: adv7180: Fix broken interrupt register access [media] vb2: Fix allocation size of dma_parms [media] vim2m: copy the other colorspace-related fields as well [media] adv7511: fix VIC autodetect doc-rst: Remove the media docbook
2016-08-04Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge even more updates from Andrew Morton: - dma-mapping API cleanup - a few cleanups and misc things - use jump labels in dynamic-debug * emailed patches from Andrew Morton <akpm@linux-foundation.org>: dynamic_debug: add jump label support jump_label: remove bug.h, atomic.h dependencies for HAVE_JUMP_LABEL arm: jump label may reference text in __exit tile: support static_key usage in non-module __exit sections sparc: support static_key usage in non-module __exit sections powerpc: add explicit #include <asm/asm-compat.h> for jump label drivers/media/dvb-frontends/cxd2841er.c: avoid misleading gcc warning MAINTAINERS: update email and list of Samsung HW driver maintainers block: remove BLK_DEV_DAX config option samples/kretprobe: fix the wrong type samples/kretprobe: convert the printk to pr_info/pr_err samples/jprobe: convert the printk to pr_info/pr_err samples/kprobe: convert the printk to pr_info/pr_err dma-mapping: use unsigned long for dma_attrs media: mtk-vcodec: remove unused dma_attrs include/linux/bitmap.h: cleanup tree-wide: replace config_enabled() with IS_ENABLED() drivers/fpga/Kconfig: fix build failure
2016-08-04drivers/media/dvb-frontends/cxd2841er.c: avoid misleading gcc warningArnd Bergmann
The addition of jump label support in dynamic_debug caused an unexpected warning in exactly one file in the kernel: drivers/media/dvb-frontends/cxd2841er.c: In function 'cxd2841er_tune_tc': include/linux/dynamic_debug.h:134:3: error: 'carrier_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] __dynamic_dev_dbg(&descriptor, dev, fmt, \ ^~~~~~~~~~~~~~~~~ drivers/media/dvb-frontends/cxd2841er.c:3177:11: note: 'carrier_offset' was declared here int ret, carrier_offset; ^~~~~~~~~~~~~~ The problem seems to be that the compiler gets confused by the extra conditionals in static_branch_unlikely, to the point where it can no longer keep track of which branches have already been taken, and it doesn't realize that this variable is now always initialized when it gets used. I have done lots of randconfig kernel builds and could not find any other file with this behavior, so I assume it's a rare enough glitch that we don't need to change the jump label support but instead just work around the warning in the driver. To achieve that, I'm moving the check for the return value into the switch() statement, which is an obvious transformation, but is enough to un-confuse the compiler here. The resulting code is not as nice to read, but at least we retain the behavior of warning if it gets changed to actually access an uninitialized carrier offset value in the future. Link: http://lkml.kernel.org/r/20160713204342.1221511-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Abylay Ospan <aospan@netup.ru> Cc: Sergey Kozlov <serjk@netup.ru> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04media: mtk-vcodec: remove unused dma_attrsKrzysztof Kozlowski
The local variable dma_attrs is set but never read. Link: http://lkml.kernel.org/r/1468399300-5399-1-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04tree-wide: replace config_enabled() with IS_ENABLED()Masahiro Yamada
The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04drivers/fpga/Kconfig: fix build failureSudip Mukherjee
While building m32r allmodconfig the build is failing with the error: ERROR: "bad_dma_ops" [drivers/fpga/zynq-fpga.ko] undefined! Xilinx Zynq FPGA is using DMA but there was no dependency while building. Link: http://lkml.kernel.org/r/1464346526-13913-1-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Alan Tull <atull@opensource.altera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04drm/i915/fbdev: Check for the framebuffer before useChris Wilson
If the fbdev probing fails, and in our error path we fail to clear the dev_priv->fbdev, then we can try and use a dangling fbdev pointer, and in particular a NULL fb. This could also happen in pathological cases where we try to operate on the fbdev prior to it being probed. Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1468431285-28264-2-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> (cherry picked from commit 6bc265424df02f8162f4a17a37e4982e1c64460e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-08-03Revert "ACPI / hotplug / PCI: Runtime resume bridge before rescan"Linus Torvalds
This reverts commit 16468c783cb4cf72475dcda23fabecb4a4bb0e17. Bisection showed that it was the root cause for a resume hang on a bog-standard all-Intel laptop (Sony Vaio Pro 11), and reverting fixes the hang. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03Merge branches 'hfi1' and 'sge-limit' into k.o/for-4.8-2Doug Ledford
2016-08-03Merge branch 'next' into for-linusDmitry Torokhov
Prepare second round of input updates for 4.8 merge window.
2016-08-03IB/core: Support for CMA multicast join flagsAlex Vesker
Added UCMA and CMA support for multicast join flags. Flags are passed using UCMA CM join command previously reserved fields. Currently supporting two join flags indicating two different multicast JoinStates: 1. Full Member: The initiator creates the Multicast group(MCG) if it wasn't previously created, can send Multicast messages to the group and receive messages from the MCG. 2. Send Only Full Member: The initiator creates the Multicast group(MCG) if it wasn't previously created, can send Multicast messages to the group but doesn't receive any messages from the MCG. IB: Send Only Full Member requires a query of ClassPortInfo to determine if SM/SA supports this option. If SM/SA doesn't support Send-Only there will be no join request sent and an error will be returned. ETH: When Send Only Full Member is requested no IGMP join will be sent. Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/sa: Add cached attribute containing SM information to SA portAlex Vesker
Added a new SA port attribute containing SM ClassPortInfo fields, (ClassPortInfo fields: Table 126 IB Spec 1.3.). This is useful for checking SM support for specific features. The attribute is cached to avoid resending queries, caching is done when a successful ClassPortInfo reply is received on the port. Invalidation of the attribute is done on SM change events, SM re-registration events, and SM LID change events. The fields in ClassPortInfo should not change during SM runtime without an event. Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/uverbs: Fix race between uverbs_close and remove_oneJason Gunthorpe
Fixes an oops that might happen if uverbs_close races with remove_one. Both contexts may run ib_uverbs_cleanup_ucontext, it depends on the flow. Currently, there is no protection for a case that remove_one didn't make the cleanup it runs to its end, the underlying ib_device was freed then uverbs_close will call ib_uverbs_cleanup_ucontext and OOPs. Above might happen if uverbs_close deleted the file from the list then remove_one didn't find it and runs to its end. Fixes to protect against that case by a new cleanup lock so that ib_uverbs_cleanup_ucontext will be called always before that remove_one is ended. Fixes: 35d4a0b63dc0 ("IB/uverbs: Fix race between ib_uverbs_open and remove_one") Reported-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/mthca: Clean up error unwind flow in mthca_reset()Markus Elfring
The kfree() function was called in a few cases by the mthca_reset() function during error handling even if the passed variables "bridge_header" and "hca_header" contained a null pointer. Adjust jump targets according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/mthca: NULL arg to pci_dev_put is OKMarkus Elfring
The pci_dev_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/hfi1: NULL arg to sc_return_credits is OKMarkus Elfring
The sc_return_credits() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/mlx4: Add diagnostic hardware countersMark Bloch
Expose IB diagnostic hardware counters. The counters count IB events and are applicable for IB and RoCE. The counters can be divided into two groups, per device and per port. Device counters are always exposed. Port counters are exposed only if the firmware supports per port counters. rq_num_dup and sq_num_to are only exposed if we have firmware support for them, if we do, we expose them per device and per port. rq_num_udsdprd and num_cqovf are device only counters. rq - denotes responder. sq - denotes requester. |-----------------------|---------------------------------------| | Name | Description | |-----------------------|---------------------------------------| |rq_num_lle | Number of local length errors | |-----------------------|---------------------------------------| |sq_num_lle | number of local length errors | |-----------------------|---------------------------------------| |rq_num_lqpoe | Number of local QP operation errors | |-----------------------|---------------------------------------| |sq_num_lqpoe | Number of local QP operation errors | |-----------------------|---------------------------------------| |rq_num_lpe | Number of local protection errors | |-----------------------|---------------------------------------| |sq_num_lpe | Number of local protection errors | |-----------------------|---------------------------------------| |rq_num_wrfe | Number of CQEs with error | |-----------------------|---------------------------------------| |sq_num_wrfe | Number of CQEs with error | |-----------------------|---------------------------------------| |sq_num_mwbe | Number of Memory Window bind errors | |-----------------------|---------------------------------------| |sq_num_bre | Number of bad response errors | |-----------------------|---------------------------------------| |sq_num_rire | Number of Remote Invalid request | | | errors | |-----------------------|---------------------------------------| |rq_num_rire | Number of Remote Invalid request | | | errors | |-----------------------|---------------------------------------| |sq_num_rae | Number of remote access errors | |-----------------------|---------------------------------------| |rq_num_rae | Number of remote access errors | |-----------------------|---------------------------------------| |sq_num_roe | Number of remote operation errors | |-----------------------|---------------------------------------| |sq_num_tree | Number of transport retries exceeded | | | errors | |-----------------------|---------------------------------------| |sq_num_rree | Number of RNR NAK retries exceeded | | | errors | |-----------------------|---------------------------------------| |rq_num_rnr | Number of RNR NAKs sent | |-----------------------|---------------------------------------| |sq_num_rnr | Number of RNR NAKs received | |-----------------------|---------------------------------------| |rq_num_oos | Number of Out of Sequence requests | | | received | |-----------------------|---------------------------------------| |sq_num_oos | Number of Out of Sequence NAKs | | | received | |-----------------------|---------------------------------------| |rq_num_udsdprd | Number of UD packets silently | | | discarded on the Receive Queue due to | | | lack of receive descriptor | |-----------------------|---------------------------------------| |rq_num_dup | Number of duplicate requests received | |-----------------------|---------------------------------------| |sq_num_to | Number of time out received | |-----------------------|---------------------------------------| |num_cqovf | Number of CQ overflows | |-----------------------|---------------------------------------| Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03net/mlx4: Query performance and diagnostics countersMark Bloch
Add a function to query diagnostics counters from the firmware. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03net/mlx4: Add diagnostic counters capability bitMark Bloch
Add a bit that indicates if the firmware supports per port diagnostic counters. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03Use smaller 512 byte messages for portmapper messagesMustafa Ismail
Portmapper messages are short and do not occupy more than 512 bytes. Lower portmapper message size to 512 bytes. This change significantly reduces the amount of memory needed when trying to establish a large number of connections simultaneously. The old value is based on page size. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/ipoib: Report SG feature regardless of HW UD CSUM capabilityYuval Shaia
Decouple SG support from HW ability to do UD checksum. This coupling is for historical reasons and removed with 'commit ec5f06156423 ("net: Kill link between CSUM and SG features.")' During driver load it is assumed that device does not supports SG. The final decision is taken after creating UD QP based on device capability. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/mlx4: Don't use GFP_ATOMIC for CQ resize structRoland Dreier
We allocate a small tracking structure as part of mlx4_ib_resize_cq(). However, we don't need to use GFP_ATOMIC -- immediately after the allocation, we call mlx4_cq_resize(), which allocates a command mailbox with GFP_KERNEL and then sleeps on a firmware command, so we better not be in an atomic context. This actually has a real impact, because when this GFP_ATOMIC allocation fails (and GFP_ATOMIC does fail in practice) then a userspace consumer resizing a CQ will get a spurious failure that we can easily avoid. Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/hfi1: Disable by defaultBart Van Assche
There is a strict policy in the Linux kernel that new drivers must be disabled by default. Hence leave out the "default m" line from Kconfig. Fixes: f48ad614c100 ("IB/hfi1: Move driver out of staging") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Jubin John <jubin.john@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: <stable@vger.kernel.org> # v4.7+ Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/rdmavt: Disable by defaultBart Van Assche
There is a strict policy in the Linux kernel that new drivers must be disabled by default. Hence leave out the "default m" line from Kconfig. Fixes: 0194621b2253 ("IB/rdmavt: Create module framework and handle driver registration") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Jubin John <jubin.john@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03Merge branch 'i40iw' into k.o/for-4.8Doug Ledford
2016-08-03Merge branches 'cxgb4' and 'mlx5' into k.o/for-4.8Doug Ledford
2016-08-04ACPI / EC: Work around method reentrancy limit in ACPICA for _QxxLv Zheng
A regression is caused by the following commit: Commit: 02b771b64b73226052d6e731a0987db3b47281e9 Subject: ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations In this commit, using system workqueue causes that the maximum parallel executions of _Qxx can exceed 255. This violates the method reentrancy limit in ACPICA and generates the following error log: ACPI Error: Method reached maximum reentrancy limit (255) (20150818/dsmethod-341) This patch creates a seperate workqueue and limits the number of parallel _Qxx evaluations down to a configurable value (can be tuned against number of online CPUs). Since EC events are handled after driver probe, we can create the workqueue in acpi_ec_init(). Fixes: 02b771b64b73 (ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations) Link: https://bugzilla.kernel.org/show_bug.cgi?id=135691 Cc: 4.3+ <stable@vger.kernel.org> # 4.3+ Reported-and-tested-by: Helen Buus <ubuntu@hbuus.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-03drm: i915: fix build when DEBUG_FS is disabledLinus Torvalds
This clearly had never gotten tested, probably because you need a fairly minimal configuration in order to disable DEBUG_FS (several other options select it). The dummy inline functions that were used for the no-DEBUG_FS case were missing the argument names in the declarations. Fixes: 1dac891c1c95 ("drm/i915: Register debugfs interface last") Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03qlcnic: Update version to 5.3.65Manish Chopra
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03qlcnic: fix napi budget alterationManish Chopra
Driver modifies the supplied NAPI budget in qlcnic_83xx_msix_tx_poll() function. Instead, it should use the budget as it is. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03qlcnic: fix data structure corruption in async mbx command handlingManish Chopra
This patch fixes a data structure corruption bug in the SRIOV VF mailbox handler code. While handling mailbox commands from the atomic context, driver is accessing and updating qlcnic_async_work_list_struct entry fields in the async work list. These fields could be concurrently accessed by the work function resulting in data corruption. This patch restructures async mbx command handling by using a separate async command list instead of using a list of work_struct structures. A single work_struct is used to schedule and handle the async commands with proper locking mechanism. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03tg3: Report the correct number of RSS queues through tg3_get_rxnfcSiva Reddy Kallam
This patch remove the wrong substraction from info->data in tg3_get_rxnfc function. Without this patch, the number of RSS queues reported is less by one. Reported-by: Michal Soltys <soltys@ziu.info> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03tg3: Fix for diasllow rx coalescing time to be 0Satish Baddipadige
When the rx coalescing time is 0, interrupts are not generated from the controller and rx path hangs. To avoid this rx hang, updating the driver to not allow rx coalescing time to be 0. Signed-off-by: Satish Baddipadige <satish.baddipadige@broadcom.com> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03net: xgene: fix maybe-uninitialized variableArnd Bergmann
Building with -Wmaybe-uninitialized shows a potential use of an uninitialized variable: drivers/net/ethernet/apm/xgene/xgene_enet_hw.c: In function 'xgene_enet_phy_connect': drivers/net/ethernet/apm/xgene/xgene_enet_hw.c:802:23: warning: 'phy_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] Although the compiler correctly identified this based on the function, the current code is still safe as long dev->of_node is non-NULL for the case of CONFIG_ACPI=n, which is currently the case. The warning is now disabled by default, but still appears when building with W=1, and other build test tools should be able to detect it as well. Adding an #else clause here makes the code more robust and makes it clear to the compiler that this cannot happen. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 8089a96f601b ("drivers: net: xgene: Add backward compatibility") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03dm raid: constructor fails on non-zero incompat_featuresHeinz Mauelshagen
When lvm2 userspace requests a RaidLV repair, it sets the rebuild constructor flag on the new replacement DataLVs but does not clear the respective MetaLVs. Hence the superblock that is loaded from such new MetaLVs may have a non-zero incompat_features member and the constructor will fail with false-positive on incompat_features. Solve by initializing the incompat_features member properly. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-03dm raid: fix processing of max_recovery_rate constructor flagHeinz Mauelshagen
__CTR_FLAG_MIN_RECOVERY_RATE was used instead of __CTR_FLAG_MAX_RECOVERY_RATE thus causing max_recovery_rate to be rejected in case min_recovery_rate was already set. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-03nvme-rdma: Make sure to shutdown the controller if we canSagi Grimberg
Relying on ctrl state in nvme_rdma_shutdown_ctrl is wrong because it will never be NVME_CTRL_LIVE (delete_ctrl or reset_ctrl invoked it). Instead, check that the admin queue is connected. Note that it is safe because we can never see a copmeting thread trying to destroy the admin queue (reset or delete controller). Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-03nvme-loop: Remove duplicate call to nvme_remove_namespacesSagi Grimberg
nvme_uninit_ctrl already does that for us. Note that we reordered nvme_loop_shutdown_ctrl with nvme_uninit_ctrl but its safe because we want controller uninit to happen before we shutdown the transport resources. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-03nvme-rdma: Free the I/O tags when we delete the controllerSagi Grimberg
If we wait until we free the controller (free_ctrl) we might lose our rdma device without any notification while we still have open resources (tags mrs and dma mappings). Instead, destroy the tags with their rdma resources once we delete the device and not when freeing it. Note that we don't do that in nvme_rdma_shutdown_ctrl because controller reset uses it as well and we want to give active I/O a chance to complete successfully. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de>
generated by cgit (git 2.34.1) at 2025-09-22 17:50:32 +0000