summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-02-14igc: Remove temporary workaroundSasha Neftin
PHY_CONTROL register works as defined in the IEEE 802.3 specification (IEEE 802.3-2008 22.2.4.1). Tidy up the temporary workaround. User impact: PHY can now be powered down when the ethernet link is down. Testing hints: ip link set down <device> (or just disconnect the ethernet cable). Oldest tested NVM version is: 1045:740. Fixes: 5586838fe9ce ("igc: Add code for PHY support") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-14igb: Fix string truncation warnings in igb_set_fw_versionKunwu Chan
Commit 1978d3ead82c ("intel: fix string truncation warnings") fixes '-Wformat-truncation=' warnings in igb_main.c by using kasprintf. drivers/net/ethernet/intel/igb/igb_main.c:3092:53: warning：‘%d’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 1 and 13 [-Wformat-truncation=] 3092 | "%d.%d, 0x%08x, %d.%d.%d", | ^~ drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535] 3092 | "%d.%d, 0x%08x, %d.%d.%d", | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535] drivers/net/ethernet/intel/igb/igb_main.c:3090:25: note：‘snprintf’ output between 23 and 43 bytes into a destination of size 32 kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Fix this warning by using a larger space for adapter->fw_version, and then fall back and continue to use snprintf. Fixes: 1978d3ead82c ("intel: fix string truncation warnings") Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Cc: Kunwu Chan <kunwu.chan@hotmail.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-14nvmem: include bit index in cell sysfs file nameArnd Bergmann
Creating sysfs files for all Cells caused a boot failure for linux-6.8-rc1 on Apple M1, which (in downstream dts files) has multiple nvmem cells that use the same byte address. This causes the device probe to fail with [ 0.605336] sysfs: cannot create duplicate filename '/devices/platform/soc@200000000/2922bc000.efuse/apple_efuses_nvmem0/cells/efuse@a10' [ 0.605347] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S 6.8.0-rc1-arnd-5+ #133 [ 0.605355] Hardware name: Apple Mac Studio (M1 Ultra, 2022) (DT) [ 0.605362] Call trace: [ 0.605365] show_stack+0x18/0x2c [ 0.605374] dump_stack_lvl+0x60/0x80 [ 0.605383] dump_stack+0x18/0x24 [ 0.605388] sysfs_warn_dup+0x64/0x80 [ 0.605395] sysfs_add_bin_file_mode_ns+0xb0/0xd4 [ 0.605402] internal_create_group+0x268/0x404 [ 0.605409] sysfs_create_groups+0x38/0x94 [ 0.605415] devm_device_add_groups+0x50/0x94 [ 0.605572] nvmem_populate_sysfs_cells+0x180/0x1b0 [ 0.605682] nvmem_register+0x38c/0x470 [ 0.605789] devm_nvmem_register+0x1c/0x6c [ 0.605895] apple_efuses_probe+0xe4/0x120 [ 0.606000] platform_probe+0xa8/0xd0 As far as I can tell, this is a problem for any device with multiple cells on different bits of the same address. Avoid the issue by changing the file name to include the first bit number. Fixes: 0331c611949f ("nvmem: core: Expose cells through sysfs") Link: https://github.com/AsahiLinux/linux/blob/bd0a1a7d4/arch/arm64/boot/dts/apple/t600x-dieX.dtsi#L156 Cc: <regressions@lists.linux.dev> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Rafał Miłecki <rafal@milecki.pl> Cc: Chen-Yu Tsai <wenst@chromium.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <asahi@lists.linux.dev> Cc: Sven Peter <sven@svenpeter.dev> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20240209163454.98051-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-14Merge tag 'iio-fixes-for-6.8a' of ↵Greg Kroah-Hartman
http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: IIO: 1st set of fixes for the 6.8 cycle Usual mixed bag of issues introduced this cycle and fixes for long term issues that have been identified recently + one case where I messed up a merge resolution and dropped the build file changes. Most important is the userspace ABI fix for the iio_modifier enum where we accidentally added new entries in the middle rather than at the end. IIO Core - Close a memory leak in an error path. - Move LIGHT_UVA and LIGHT_UVB definitions to end of the iio_modifier enum to avoid breaking older userspace. (not yet in a released kernel thankfully). adi,adis - Fix a DMA buffer alignment issue that was missing in series that fixed these across IIO. adi,ad-sigma-delta - Fix a DMA buffer alignment issue that was missing in series that fixed these across IIO. adi,ad4130 - Zero init remaining fields of clock init data. - Only set GPIO control bits on pins that aren't in use for anything else. adi,ad5933 - Fix an old bug due to type mismatch. This is a rare device so good to get some new test coverage. adi,ad7091r - Use right variable for an error return code. bosch,bma400 - Add missing CONFIG_REGMAP_I2C dependency. bosch,bmp280: - Add missing bmp085 ID to the SPI table to avoid mismatch with the of_device_id table. hid-sensors: - Avoid returning an error for timestamp read back that succeeds. pni,rm3100 - Check value read from RM31000_REG_TMRC register is valid before using it. Hardening to avoid a real world issue seen on some faulty hardware. st,st-sensors - Fix a DMA buffer alignment issue that was missing in series that fixed these across IIO. ti,hdc3020 - Add missing Kconfig and Makefile entrees accidentally dropped when patches were applied. - Fix wrong temperature offset (negated) * tag 'iio-fixes-for-6.8a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: adc: ad4130: only set GPIO_CTRL if pin is unused iio: adc: ad4130: zero-initialize clock init data iio: accel: bma400: Fix a compilation problem iio: commom: st_sensors: ensure proper DMA alignment iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier staging: iio: ad5933: fix type mismatch regression iio: humidity: hdc3020: fix temperature offset iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup() iio: adc: ad_sigma_delta: ensure proper DMA alignment iio: imu: adis: ensure proper DMA alignment iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry iio: imu: bno055: serdev requires REGMAP iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC iio: pressure: bmp280: Add missing bmp085 to SPI id table iio: core: fix memleak in iio_device_register_sysfs
2024-02-14drm/tests/drm_buddy: add alloc_contiguous testMatthew Auld
Sanity check DRM_BUDDY_CONTIGUOUS_ALLOCATION. v2: Fix checkpatch warnings. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214131853.5934-2-Arunpravin.PaneerSelvam@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2024-02-14drm/buddy: Fix alloc_range() error handling codeArunpravin Paneer Selvam
Few users have observed display corruption when they boot the machine to KDE Plasma or playing games. We have root caused the problem that whenever alloc_range() couldn't find the required memory blocks the function was returning SUCCESS in some of the corner cases. The right approach would be if the total allocated size is less than the required size, the function should return -ENOSPC. Cc: <stable@vger.kernel.org> # 6.7+ Fixes: 0a1844bf0b53 ("drm/buddy: Improve contiguous memory allocation") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3097 Tested-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20240207174456.341121-1-Arunpravin.PaneerSelvam@amd.com/ Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214131853.5934-1-Arunpravin.PaneerSelvam@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2024-02-14can: netlink: Fix TDCO calculation using the old data bittimingMaxime Jayat
The TDCO calculation was done using the currently applied data bittiming, instead of the newly computed data bittiming, which means that the TDCO had an invalid value unless setting the same data bittiming twice. Fixes: d99755f71a80 ("can: netlink: add interface for CAN-FD Transmitter Delay Compensation (TDC)") Signed-off-by: Maxime Jayat <maxime.jayat@mobile-devices.fr> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/40579c18-63c0-43a4-8d4c-f3a6c1c0b417@munic.io Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-14ethernet: cpts: fix function pointer cast warningsArnd Bergmann
clang-16 warns about the mismatched prototypes for the devm_* callbacks: drivers/net/ethernet/ti/cpts.c:691:12: error: cast from 'void (*)(struct clk_hw *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 691 | (void(*)(void *))clk_hw_unregister_mux, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/device.h:406:34: note: expanded from macro 'devm_add_action_or_reset' 406 | __devm_add_action_or_reset(dev, action, data, #action) | ^~~~~~ drivers/net/ethernet/ti/cpts.c:703:12: error: cast from 'void (*)(struct device_node *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 703 | (void(*)(void *))of_clk_del_provider, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/device.h:406:34: note: expanded from macro 'devm_add_action_or_reset' 406 | __devm_add_action_or_reset(dev, action, data, #action) Use separate helper functions for this instead, using the expected prototypes with a void* argument. Fixes: a3047a81ba13 ("net: ethernet: ti: cpts: add support for ext rftclk selection") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14bnad: fix work_queue type mismatchArnd Bergmann
clang-16 warns about a function pointer cast: drivers/net/ethernet/brocade/bna/bnad.c:1995:4: error: cast from 'void (*)(struct delayed_work *)' to 'work_func_t' (aka 'void (*)(struct work_struct *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict] 1995 | (work_func_t)bnad_tx_cleanup); drivers/net/ethernet/brocade/bna/bnad.c:2252:4: error: cast from 'void (*)(void *)' to 'work_func_t' (aka 'void (*)(struct work_struct *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict] 2252 | (work_func_t)(bnad_rx_cleanup)); The problem here is mixing up work_struct and delayed_work, which relies the former being the first member of the latter. Change the code to use consistent types here to address the warning and make it more robust against workqueue interface changes. Side note: the use of a delayed workqueue for cleaning up TX descriptors is probably a bad idea since this introduces a noticeable delay. The driver currently does not appear to use BQL, but if one wanted to add that, this would have to be changed as well. Fixes: 01b54b145185 ("bna: tx rx cleanup fix") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-02-12 (i40e) This series contains updates to i40e driver only. Ivan Vecera corrects the looping value used while waiting for queues to be disabled as well as an incorrect mask being used for DCB configuration. Maciej resolves an issue related to XDP traffic; removing a double call to i40e_pf_rxq_wait() and accounting for XDP rings when stopping rings. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14mmc: mmci: stm32: fix DMA API overlapping mappings warningChristophe Kerello
Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning: DMA-API: mmci-pl18x 48220000.mmc: cacheline tracking EEXIST, overlapping mappings aren't supported WARNING: CPU: 1 PID: 51 at kernel/dma/debug.c:568 add_dma_entry+0x234/0x2f4 Modules linked in: CPU: 1 PID: 51 Comm: kworker/1:2 Not tainted 6.1.28 #1 Hardware name: STMicroelectronics STM32MP257F-EV1 Evaluation Board (DT) Workqueue: events_freezable mmc_rescan Call trace: add_dma_entry+0x234/0x2f4 debug_dma_map_sg+0x198/0x350 __dma_map_sg_attrs+0xa0/0x110 dma_map_sg_attrs+0x10/0x2c sdmmc_idma_prep_data+0x80/0xc0 mmci_prep_data+0x38/0x84 mmci_start_data+0x108/0x2dc mmci_request+0xe4/0x190 __mmc_start_request+0x68/0x140 mmc_start_request+0x94/0xc0 mmc_wait_for_req+0x70/0x100 mmc_send_tuning+0x108/0x1ac sdmmc_execute_tuning+0x14c/0x210 mmc_execute_tuning+0x48/0xec mmc_sd_init_uhs_card.part.0+0x208/0x464 mmc_sd_init_card+0x318/0x89c mmc_attach_sd+0xe4/0x180 mmc_rescan+0x244/0x320 DMA API debug brings to light leaking dma-mappings as dma_map_sg and dma_unmap_sg are not correctly balanced. If an error occurs in mmci_cmd_irq function, only mmci_dma_error function is called and as this API is not managed on stm32 variant, dma_unmap_sg is never called in this error path. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Fixes: 46b723dd867d ("mmc: mmci: add stm32 sdmmc variant") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240207143951.938144-1-christophe.kerello@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-14ata: libata-core: Do not try to set sleeping devices to standbyDamien Le Moal
In ata ata_dev_power_set_standby(), check that the target device is not sleeping. If it is, there is no need to do anything. Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-02-14octeontx2-af: Remove the PF_FUNC validation for NPC transmit rulesSubbaraya Sundeep
NPC transmit side mcam rules can use the pcifunc (in packet metadata added by hardware) of transmitting device for mcam lookup similar to the channel of receiving device at receive side. The commit 18603683d766 ("octeontx2-af: Remove channel verification while installing MCAM rules") removed the receive side channel verification to save hardware MCAM filters while switching packets across interfaces but missed removing transmit side checks. This patch removes transmit side rules validation. Fixes: 18603683d766 ("octeontx2-af: Remove channel verification while installing MCAM rules") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14RDMA/srpt: fix function pointer cast warningsArnd Bergmann
clang-16 notices that srpt_qp_event() gets called through an incompatible pointer here: drivers/infiniband/ulp/srpt/ib_srpt.c:1815:5: error: cast from 'void (*)(struct ib_event *, struct srpt_rdma_ch *)' to 'void (*)(struct ib_event *, void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 1815 | = (void(*)(struct ib_event *, void*))srpt_qp_event; Change srpt_qp_event() to use the correct prototype and adjust the argument inside of it. Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240213100728.458348-1-arnd@kernel.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-02-13nvmet: remove superfluous initializationChaitanya Kulkarni
Remove superfluous initialization of status variable in nvmet_execute_admin_connect() and nvmet_execute_io_connect(), since it will get overwritten by nvmet_copy_from_sgl(). Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-02-13mmc: core: Fix eMMC initialization with 1-bit bus connectionIvan Semenov
Initializing an eMMC that's connected via a 1-bit bus is current failing, if the HW (DT) informs that 4-bit bus is supported. In fact this is a regression, as we were earlier capable of falling back to 1-bit mode, when switching to 4/8-bit bus failed. Therefore, let's restore the behaviour. Log for Samsung eMMC 5.1 chip connected via 1bit bus (only D0 pin) Before patch: [134509.044225] mmc0: switch to bus width 4 failed [134509.044509] mmc0: new high speed MMC card at address 0001 [134509.054594] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB [134509.281602] mmc0: switch to bus width 4 failed [134509.282638] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.282657] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.284598] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.284602] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.284609] ldm_validate_partition_table(): Disk read failed. [134509.286495] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.286500] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.288303] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.288308] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.289540] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.289544] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.289553] mmcblk0: unable to read partition table [134509.289728] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB [134509.290283] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB [134509.294577] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [134509.295835] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.295841] Buffer I/O error on dev mmcblk0, logical block 0, async page read After patch: [134551.089613] mmc0: switch to bus width 4 failed [134551.090377] mmc0: new high speed MMC card at address 0001 [134551.102271] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB [134551.113365] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 [134551.114262] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB [134551.114925] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB Fixes: 577fb13199b1 ("mmc: rework selection of bus speed mode") Cc: stable@vger.kernel.org Signed-off-by: Ivan Semenov <ivan@semenov.dev> Link: https://lore.kernel.org/r/20240206172845.34316-1-ivan@semenov.dev Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-13drm/rockchip: vop2: add a missing unlock in vop2_crtc_atomic_enable()Harshit Mogalapalli
Unlock before returning on the error path. Fixes: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240119190841.1619443-1-harshit.m.mogalapalli@oracle.com
2024-02-13nvme: implement support for relaxed effectsKeith Busch
NVM Express TP4167 provides a way for controllers to report a relaxed execution constraint. Specifically, it notifies of exclusivity for IO vs. admin commands instead of grouping these together. If set, then we don't need to freeze IO in order to execute that admin command. The freezing distrupts IO processes, so it's nice to avoid that if the controller tells us it's not necessary. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-02-13nvme-fabrics: fix I/O connect error handlingChaitanya Kulkarni
In nvmf_connect_io_queue(), if connect I/O command fails, we log the error and continue for authentication. This overrides error captured from __nvme_submit_sync_cmd(), causing wrong return value. Add goto out_free_data after logging connect error to fix the issue. Fixes: f50fff73d620c ("nvme: implement In-Band authentication") Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-02-13drm/crtc: fix uninitialized variable use even harderRob Clark
DRM_MODESET_LOCK_ALL_BEGIN() has a hidden trap-door (aka retry loop), which means we can't rely too much on variable initializers. Fixes: 6e455f5dcdd1 ("drm/crtc: fix uninitialized variable use") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sc7180, sdm845 Link: https://patchwork.freedesktop.org/patch/msgid/20240212215534.190682-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-02-13spi-mxs: Fix chipselect glitchRalf Schlatterbeck
There was a change in the mxs-dma engine that uses a new custom flag. The change was not applied to the mxs spi driver. This results in chipselect being deasserted too early. This fixes the chipselect problem by using the new flag in the mxs-spi driver. Fixes: ceeeb99cd821 ("dmaengine: mxs: rename custom flag") Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com> Link: https://msgid.link/r/20240202115330.wxkbfmvd76sy3a6a@runtux.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-13regulator: max5970: Fix regulator child node nameNaresh Solanki
Update regulator child node name to lower case i.e., sw0 & sw1 as descibed in max5970 dt binding. Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com> Link: https://msgid.link/r/20240213145801.2564518-1-naresh.solanki@9elements.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-13drm/prime: Support page array >= 4GBPhilip Yang
Without unsigned long typecast, the size is passed in as zero if page array size >= 4GB, nr_pages >= 0x100000, then sg list converted will have the first and the last chunk lost. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821200201.24685-1-Philip.Yang@amd.com
2024-02-13efi/capsule-loader: fix incorrect allocation sizeArnd Bergmann
gcc-14 notices that the allocation with sizeof(void) on 32-bit architectures is not enough for a 64-bit phys_addr_t: drivers/firmware/efi/capsule-loader.c: In function 'efi_capsule_open': drivers/firmware/efi/capsule-loader.c:295:24: error: allocation of insufficient size '4' for type 'phys_addr_t' {aka 'long long unsigned int'} with size '8' [-Werror=alloc-size] 295 | cap_info->phys = kzalloc(sizeof(void *), GFP_KERNEL); | ^ Use the correct type instead here. Fixes: f24c4d478013 ("efi/capsule-loader: Reinstate virtual capsule mapping") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-02-13net: ti: icssg-prueth: add dependency for PTPRandy Dunlap
When CONFIG_PTP_1588_CLOCK=m and CONFIG_TI_ICSSG_PRUETH=y, there are kconfig dependency warnings and build errors referencing PTP functions. Fix these by making TI_ICSSG_PRUETH depend on PTP_1588_CLOCK_OPTIONAL. Fixes these build errors and warnings: WARNING: unmet direct dependencies detected for TI_ICSS_IEP Depends on [m]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_TI [=y] && PTP_1588_CLOCK_OPTIONAL [=m] && TI_PRUSS [=y] Selected by [y]: - TI_ICSSG_PRUETH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_TI [=y] && PRU_REMOTEPROC [=y] && ARCH_K3 [=y] && OF [=y] && TI_K3_UDMA_GLUE_LAYER [=y] aarch64-linux-ld: drivers/net/ethernet/ti/icssg/icss_iep.o: in function `icss_iep_get_ptp_clock_idx': icss_iep.c:(.text+0x1d4): undefined reference to `ptp_clock_index' aarch64-linux-ld: drivers/net/ethernet/ti/icssg/icss_iep.o: in function `icss_iep_exit': icss_iep.c:(.text+0xde8): undefined reference to `ptp_clock_unregister' aarch64-linux-ld: drivers/net/ethernet/ti/icssg/icss_iep.o: in function `icss_iep_init': icss_iep.c:(.text+0x176c): undefined reference to `ptp_clock_register' Fixes: 186734c15886 ("net: ti: icssg-prueth: add packet timestamping and ptp support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Roger Quadros <rogerq@ti.com> Cc: Md Danish Anwar <danishanwar@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Link: https://lore.kernel.org/r/20240211061152.14696-1-rdunlap@infradead.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-13Revert "iommu/arm-smmu: Convert to domain_alloc_paging()"Dmitry Baryshkov
This reverts commit 9b3febc3a3da ("iommu/arm-smmu: Convert to domain_alloc_paging()"). It breaks Qualcomm MSM8996 platform. Calling arm_smmu_write_context_bank() from new codepath results in the platform being reset because of the unclocked hardware access. Fixes: 9b3febc3a3da ("iommu/arm-smmu: Convert to domain_alloc_paging()") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20240213-iommu-revert-domain-alloc-v1-1-325ff55dece4@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2024-02-13pmdomain: arm: Fix NULL dereference on scmi_perf_domain removalCristian Marussi
On unloading of the scmi_perf_domain module got the below splat, when in the DT provided to the system under test the '#power-domain-cells' property was missing. Indeed, this particular setup causes the probe to bail out early without giving any error, which leads to the ->remove() callback gets to run too, but without all the expected initialized structures in place. Add a check and bail out early on remove too. Call trace: scmi_perf_domain_remove+0x28/0x70 [scmi_perf_domain] scmi_dev_remove+0x28/0x40 [scmi_core] device_remove+0x54/0x90 device_release_driver_internal+0x1dc/0x240 driver_detach+0x58/0xa8 bus_remove_driver+0x78/0x108 driver_unregister+0x38/0x70 scmi_driver_unregister+0x28/0x180 [scmi_core] scmi_perf_domain_driver_exit+0x18/0xb78 [scmi_perf_domain] __arm64_sys_delete_module+0x1a8/0x2c0 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0xb8 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 Code: a90153f3 f9403c14 f9414800 955f8a05 (b9400a80) ---[ end trace 0000000000000000 ]--- Fixes: 2af23ceb8624 ("pmdomain: arm: Add the SCMI performance domain") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240125191756.868860-1-cristian.marussi@arm.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-13HID: wacom: generic: Avoid reporting a serial of '0' to userspaceTatsunosuke Tobita
The xf86-input-wacom driver does not treat '0' as a valid serial number and will drop any input report which contains an MSC_SERIAL = 0 event. The kernel driver already takes care to avoid sending any MSC_SERIAL event if the value of serial[0] == 0 (which is the case for devices that don't actually report a serial number), but this is not quite sufficient. Only the lower 32 bits of the serial get reported to userspace, so if this portion of the serial is zero then there can still be problems. This commit allows the driver to report either the lower 32 bits if they are non-zero or the upper 32 bits otherwise. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com> Fixes: f85c9dc678a5 ("HID: wacom: generic: Support tool ID and additional tool types") CC: stable@vger.kernel.org # v4.10 Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-02-13HID: Intel-ish-hid: Ishtp: Fix sensor reads after ACPI S3 suspendEven Xu
After legacy suspend/resume via ACPI S3, sensor read operation fails with timeout. Also, it will cause delay in resume operation as there will be retries on failure. This is caused by commit f645a90e8ff7 ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection"), which used helper functions to simplify connect, reset and disconnect process. Also avoid freeing and allocating client buffers again during reconnect process. But there is a case, when ISH firmware resets after ACPI S3 suspend, ishtp bus driver frees client buffers. Since there is no realloc again during reconnect, there are no client buffers available to send connection requests to the firmware. Without successful connection to the firmware, subsequent sensor reads will timeout. To address this issue, ishtp bus driver does not free client buffers on warm reset after S3 resume. Simply add the buffers from the read list to free list of buffers. Fixes: f645a90e8ff7 ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218442 Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-02-13irqchip/gic-v3-its: Fix GICv4.1 VPE affinity updateMarc Zyngier
When updating the affinity of a VPE, the VMOVP command is currently skipped if the two CPUs are part of the same VPE affinity. But this is wrong, as the doorbell corresponding to this VPE is still delivered on the 'old' CPU, which screws up the balancing. Furthermore, offlining that 'old' CPU results in doorbell interrupts generated for this VPE being discarded. The harsh reality is that VMOVP cannot be elided when a set_affinity() request occurs. It needs to be obeyed, and if an optimisation is to be made, it is at the point where the affinity change request is made (such as in KVM). Drop the VMOVP elision altogether, and only use the vpe_table_mask to try and stay within the same ITS affinity group if at all possible. Fixes: dd3f050a216e (irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP) Reported-by: Kunkun Jiang <jiangkunkun@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240213101206.2137483-4-maz@kernel.org
2024-02-13irqchip/gic-v3-its: Restore quirk probing for ACPI-based systemsMarc Zyngier
While refactoring the way the ITSs are probed, the handling of quirks applicable to ACPI-based platforms was lost. As a result, systems such as HIP07 lose their GICv4 functionnality, and some other may even fail to boot, unless they are configured to boot with DT. Move the enabling of quirks into its_probe_one(), making it common to all firmware implementations. Fixes: 9585a495ac93 ("irqchip/gic-v3-its: Split allocation from initialisation of its_node") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240213101206.2137483-3-maz@kernel.org
2024-02-13irqchip/gic-v3-its: Handle non-coherent GICv4 redistributorsMarc Zyngier
Although the GICv3 code base has gained some handling of systems failing to handle the shareability attributes, the GICv4 side of things has been firmly ignored. This is unfortunate, as the new recent addition of the "dma-noncoherent" is supposed to apply to all of the GICR tables, and not just the ones that are common to v3 and v4. Add some checks to handle the VPROPBASE/VPENDBASE shareability and cacheability attributes in the same way we deal with the other GICR_BASE registers, wrapping the flag check in a helper for improved readability. Note that this has been found by inspection only, as I don't have access to HW that suffers from this particular issue. Fixes: 3a0fff0fb6a3 ("irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Link: https://lore.kernel.org/r/20240213101206.2137483-2-maz@kernel.org
2024-02-13HID: multitouch: Add required quirk for Synaptics 0xcddc deviceManuel Fombuena
Add support for the pointing stick (Accupoint) and 2 mouse buttons. Present on some Toshiba/dynabook Portege X30 and X40 laptops. It should close https://bugzilla.kernel.org/show_bug.cgi?id=205817 Signed-off-by: Manuel Fombuena <fombuena@outlook.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-02-13connector/cn_proc: revert "connector: Fix proc_event_num_listeners count not ↵Keqi Wang
cleared" This reverts commit c46bfba1337d ("connector: Fix proc_event_num_listeners count not cleared"). It is not accurate to reset proc_event_num_listeners according to cn_netlink_send_mult() return value -ESRCH. In the case of stress-ng netlink-proc, -ESRCH will always be returned, because netlink_broadcast_filtered will return -ESRCH, which may cause stress-ng netlink-proc performance degradation. Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202401112259.b23a1567-oliver.sang@intel.com Fixes: c46bfba1337d ("connector: Fix proc_event_num_listeners count not cleared") Signed-off-by: Keqi Wang <wangkeqi_chris@163.com> Link: https://lore.kernel.org/r/20240209091659.68723-1-wangkeqi_chris@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-13irqchip/qcom-mpm: Fix IS_ERR() vs NULL check in qcom_mpm_init()Dan Carpenter
devm_ioremap() doesn't return error pointers, it returns NULL on error. Update the check accordingly. Fixes: 221b110d87c2 ("irqchip/qcom-mpm: Support passing a slice of SRAM as reg space") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/22e1f4de-edce-4791-bd2d-2b2e98529492@moroto.mountain
2024-02-13irqchip/loongson-eiointc: Use correct struct type in eiointc_domain_alloc()Bibo Mao
eiointc_domain_alloc() uses struct eiointc, which is not defined, for a pointer. Older compilers treat that as a forward declaration and due to assignment of a void pointer there is no warning emitted. As the variable is then handed in as a void pointer argument to irq_domain_set_info() the code is functional. Use struct eiointc_priv instead. [ tglx: Rewrote changelog ] Fixes: dd281e1a1a93 ("irqchip: Add Loongson Extended I/O interrupt controller support") Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/r/20240130082722.2912576-2-maobibo@loongson.cn
2024-02-13xen/events: close evtchn after mapping cleanupMaximilian Heyne
shutdown_pirq and startup_pirq are not taking the irq_mapping_update_lock because they can't due to lock inversion. Both are called with the irq_desc->lock being taking. The lock order, however, is first irq_mapping_update_lock and then irq_desc->lock. This opens multiple races: - shutdown_pirq can be interrupted by a function that allocates an event channel: CPU0 CPU1 shutdown_pirq { xen_evtchn_close(e) __startup_pirq { EVTCHNOP_bind_pirq -> returns just freed evtchn e set_evtchn_to_irq(e, irq) } xen_irq_info_cleanup() { set_evtchn_to_irq(e, -1) } } Assume here event channel e refers here to the same event channel number. After this race the evtchn_to_irq mapping for e is invalid (-1). - __startup_pirq races with __unbind_from_irq in a similar way. Because __startup_pirq doesn't take irq_mapping_update_lock it can grab the evtchn that __unbind_from_irq is currently freeing and cleaning up. In this case even though the event channel is allocated, its mapping can be unset in evtchn_to_irq. The fix is to first cleanup the mappings and then close the event channel. In this way, when an event channel gets allocated it's potential previous evtchn_to_irq mappings are guaranteed to be unset already. This is also the reverse order of the allocation where first the event channel is allocated and then the mappings are setup. On a 5.10 kernel prior to commit 3fcdaf3d7634 ("xen/events: modify internal [un]bind interfaces"), we hit a BUG like the following during probing of NVMe devices. The issue is that during nvme_setup_io_queues, pci_free_irq is called for every device which results in a call to shutdown_pirq. With many nvme devices it's therefore likely to hit this race during boot because there will be multiple calls to shutdown_pirq and startup_pirq are running potentially in parallel. ------------[ cut here ]------------ blkfront: xvda: barrier or flush: disabled; persistent grants: enabled; indirect descriptors: enabled; bounce buffer: enabled kernel BUG at drivers/xen/events/events_base.c:499! invalid opcode: 0000 [#1] SMP PTI CPU: 44 PID: 375 Comm: kworker/u257:23 Not tainted 5.10.201-191.748.amzn2.x86_64 #1 Hardware name: Xen HVM domU, BIOS 4.11.amazon 08/24/2006 Workqueue: nvme-reset-wq nvme_reset_work RIP: 0010:bind_evtchn_to_cpu+0xdf/0xf0 Code: 5d 41 5e c3 cc cc cc cc 44 89 f7 e8 2b 55 ad ff 49 89 c5 48 85 c0 0f 84 64 ff ff ff 4c 8b 68 30 41 83 fe ff 0f 85 60 ff ff ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00 RSP: 0000:ffffc9000d533b08 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 RDX: 0000000000000028 RSI: 00000000ffffffff RDI: 00000000ffffffff RBP: ffff888107419680 R08: 0000000000000000 R09: ffffffff82d72b00 R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000001ed R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffff88bc8b500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000002610001 CR4: 00000000001706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? show_trace_log_lvl+0x1c1/0x2d9 ? show_trace_log_lvl+0x1c1/0x2d9 ? set_affinity_irq+0xdc/0x1c0 ? __die_body.cold+0x8/0xd ? die+0x2b/0x50 ? do_trap+0x90/0x110 ? bind_evtchn_to_cpu+0xdf/0xf0 ? do_error_trap+0x65/0x80 ? bind_evtchn_to_cpu+0xdf/0xf0 ? exc_invalid_op+0x4e/0x70 ? bind_evtchn_to_cpu+0xdf/0xf0 ? asm_exc_invalid_op+0x12/0x20 ? bind_evtchn_to_cpu+0xdf/0xf0 ? bind_evtchn_to_cpu+0xc5/0xf0 set_affinity_irq+0xdc/0x1c0 irq_do_set_affinity+0x1d7/0x1f0 irq_setup_affinity+0xd6/0x1a0 irq_startup+0x8a/0xf0 __setup_irq+0x639/0x6d0 ? nvme_suspend+0x150/0x150 request_threaded_irq+0x10c/0x180 ? nvme_suspend+0x150/0x150 pci_request_irq+0xa8/0xf0 ? __blk_mq_free_request+0x74/0xa0 queue_request_irq+0x6f/0x80 nvme_create_queue+0x1af/0x200 nvme_create_io_queues+0xbd/0xf0 nvme_setup_io_queues+0x246/0x320 ? nvme_irq_check+0x30/0x30 nvme_reset_work+0x1c8/0x400 process_one_work+0x1b0/0x350 worker_thread+0x49/0x310 ? process_one_work+0x350/0x350 kthread+0x11b/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 Modules linked in: ---[ end trace a11715de1eee1873 ]--- Fixes: d46a78b05c0e ("xen: implement pirq type event channels") Cc: stable@vger.kernel.org Co-debugged-by: Andrew Panyakin <apanyaki@amazon.com> Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20240124163130.31324-1-mheyne@amazon.de Signed-off-by: Juergen Gross <jgross@suse.com>
2024-02-13irqchip/irq-brcmstb-l2: Add write memory barrier before exitDoug Berger
It was observed on Broadcom devices that use GIC v3 architecture L1 interrupt controllers as the parent of brcmstb-l2 interrupt controllers that the deactivation of the parent interrupt could happen before the brcmstb-l2 deasserted its output. This would lead the GIC to reactivate the interrupt only to find that no L2 interrupt was pending. The result was a spurious interrupt invoking handle_bad_irq() with its associated messaging. While this did not create a functional problem it is a waste of cycles. The hazard exists because the memory mapped bus writes to the brcmstb-l2 registers are buffered and the GIC v3 architecture uses a very efficient system register write to deactivate the interrupt. Add a write memory barrier prior to invoking chained_irq_exit() to introduce a dsb(st) on those systems to ensure the system register write cannot be executed until the memory mapped writes are visible to the system. [ florian: Added Fixes tag ] Fixes: 7f646e92766e ("irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240210012449.3009125-1-florian.fainelli@broadcom.com
2024-02-13xen/gntalloc: Replace UAPI 1-element arrayKees Cook
Without changing the structure size (since it is UAPI), add a proper flexible array member, and reference it in the kernel so that it will not be trip the array-bounds sanitizer[1]. Link: https://github.com/KSPP/linux/issues/113 [1] Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: xen-devel@lists.xenproject.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20240206170320.work.437-kees@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2024-02-13xen: balloon: make balloon_subsys constRicardo B. Marliere
Now that the driver core can properly handle constant struct bus_type, move the balloon_subsys variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240203-bus_cleanup-xen-v1-2-c2f5fe89ed95@marliere.net Signed-off-by: Juergen Gross <jgross@suse.com>
2024-02-13xen: pcpu: make xen_pcpu_subsys constRicardo B. Marliere
Now that the driver core can properly handle constant struct bus_type, move the xen_pcpu_subsys variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240203-bus_cleanup-xen-v1-1-c2f5fe89ed95@marliere.net Signed-off-by: Juergen Gross <jgross@suse.com>
2024-02-13xen/privcmd: Use memdup_array_user() in alloc_ioreq()Markus Elfring
* The function “memdup_array_user” was added with the commit 313ebe47d75558511aa1237b6e35c663b5c0ec6f ("string.h: add array-wrappers for (v)memdup_user()"). Thus use it accordingly. This issue was detected by using the Coccinelle software. * Delete a label which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/41e333f7-1f3a-41b6-a121-a3c0ae54e36f@web.de Signed-off-by: Juergen Gross <jgross@suse.com>
2024-02-12scsi: fnic: Move fnic_fnic_flush_tx() to a work queueLee Duncan
Rather than call 'fnic_flush_tx()' from interrupt context we should be moving it onto a work queue to avoid any locking issues. Fixes: 1a1975551943 ("scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock") Co-developed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Duncan <lduncan@suse.com> Link: https://lore.kernel.org/r/ce5ffa5d0ff82c2b2e283b3b4bff23291d49b05c.1707500786.git.lduncan@suse.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-12scsi: Revert "scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock"Lee Duncan
This reverts commit 1a1975551943f681772720f639ff42fbaa746212. This commit causes interrupts to be lost for FCoE devices, since it changed sping locks from "bh" to "irqsave". Instead, a work queue should be used, and will be addressed in a separate commit. Fixes: 1a1975551943 ("scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock") Signed-off-by: Lee Duncan <lduncan@suse.com> Link: https://lore.kernel.org/r/c578cdcd46b60470535c4c4a953e6a1feca0dffd.1707500786.git.lduncan@suse.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-12scsi: target: Fix unmap setup during configurationMike Christie
This issue was found and also debugged by Carl Lei <me@xecycle.info>. If the device is not enabled, iblock/file will have not setup their se_device to bdev/file mappings. If a user tries to config the unmap settings at this time, we will then crash trying to access a NULL pointer where the bdev/file should be. This patch adds a check to make sure the device is configured before we try to call the configure_unmap callout. Fixes: 34bd1dcacf0d ("scsi: target: Detect UNMAP support post configuration") Reported-by: Carl Lei <me@xecycle.info> Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20240209215247.5213-1-michael.christie@oracle.com Reviewed-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-12pds_core: no health-thread in VF pathShannon Nelson
The VFs don't run the health thread, so don't try to stop or restart the non-existent timer or work item. Fixes: d9407ff11809 ("pds_core: Prevent health thread from running during reset/remove") Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240210002002.49483-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-12ionic: minimal work with 0 budgetShannon Nelson
We should be doing as little as possible besides freeing Tx space when our napi routines are called with budget of 0, so jump out before doing anything besides Tx cleaning. See commit afbed3f74830 ("net/mlx5e: do as little as possible in napi poll when budget is 0") for more info. Fixes: fe8c30b50835 ("ionic: separate interrupt for Tx and Rx") Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240210001307.48450-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-12net: stmmac: xgmac: use #define for string constantsSimon Horman
The cited commit introduces and uses the string constants dpp_tx_err and dpp_rx_err. These are assigned to constant fields of the array dwxgmac3_error_desc. It has been reported that on GCC 6 and 7.5.0 this results in warnings such as: .../dwxgmac2_core.c:836:20: error: initialiser element is not constant { true, "TDPES0", dpp_tx_err }, I have been able to reproduce this using: GCC 7.5.0, 8.4.0, 9.4.0 and 10.5.0. But not GCC 13.2.0. So it seems this effects older compilers but not newer ones. As Jon points out in his report, the minimum compiler supported by the kernel is GCC 5.1, so it does seem that this ought to be fixed. It is not clear to me what combination of 'const', if any, would address this problem. So this patch takes of using #defines for the string constants Compile tested only. Fixes: 46eba193d04f ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels") Reported-by: Jon Hunter <jonathanh@nvidia.com> Closes: https://lore.kernel.org/netdev/c25eb595-8d91-40ea-9f52-efa15ebafdbc@nvidia.com/ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402081135.lAxxBXHk-lkp@intel.com/ Signed-off-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240208-xgmac-const-v1-1-e69a1eeabfc8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-12i40e: take into account XDP Tx queues when stopping ringsMaciej Fijalkowski
Seth reported that on his side XDP traffic can not survive a round of down/up against i40e interface. Dmesg output was telling us that we were not able to disable the very first XDP ring. That was due to the fact that in i40e_vsi_stop_rings() in a pre-work that is done before calling i40e_vsi_wait_queues_disabled(), XDP Tx queues were not taken into the account. To fix this, let us distinguish between Rx and Tx queue boundaries and take into the account XDP queues for Tx side. Reported-by: Seth Forshee <sforshee@kernel.org> Closes: https://lore.kernel.org/netdev/ZbkE7Ep1N1Ou17sA@do-x1extreme/ Fixes: 65662a8dcdd0 ("i40e: Fix logic of disabling queues") Tested-by: Seth Forshee <sforshee@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12i40e: avoid double calling i40e_pf_rxq_wait()Maciej Fijalkowski
Currently, when interface is being brought down and i40e_vsi_stop_rings() is called, i40e_pf_rxq_wait() is called two times, which is wrong. To showcase this scenario, simplified call stack looks as follows: i40e_vsi_stop_rings() i40e_control wait rx_q() i40e_control_rx_q() i40e_pf_rxq_wait() i40e_vsi_wait_queues_disabled() i40e_pf_rxq_wait() // redundant call To fix this, let us s/i40e_control_wait_rx_q/i40e_control_rx_q within i40e_vsi_stop_rings(). Fixes: 65662a8dcdd0 ("i40e: Fix logic of disabling queues") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 10:51:14 +0000