summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-04-29ixgbe: delay tail write to every 'n' packetsJohn Fastabend
Current XDP implementation hits the tail on every XDP_TX return code. This patch changes driver behavior to only hit the tail after packet processing is complete. With this patch I can run XDP drop programs @ 14+Mpps and XDP_TX programs are at ~13.5Mpps. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbe: add support for XDP_TX actionJohn Fastabend
A couple design choices were made here. First I use a new ring pointer structure xdp_ring[] in the adapter struct instead of pushing the newly allocated XDP TX rings into the tx_ring[] structure. This means we have to duplicate loops around rings in places we want to initialize both TX rings and XDP rings. But by making it explicit it is obvious when we are using XDP rings and when we are using TX rings. Further we don't have to do ring arithmatic which is error prone. As a proof point for doing this my first patches used only a single ring structure and introduced bugs in FCoE code and macvlan code paths. Second I am aware this is not the most optimized version of this code possible. I want to get baseline support in using the most readable format possible and then once this series is included I will optimize the TX path in another series of patches. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbe: add XDP support for pass and drop actionsJohn Fastabend
Basic XDP drop support for ixgbe. Uses READ_ONCE/xchg semantics on XDP programs instead of RCU primitives as suggested by Daniel Borkmann and Alex Duyck. v2: fix the build issues seen w/ XDP when page sizes are larger than 4K and made minor fixes based on feedback from Jakub Kicinski Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-30crypto: stm32 - Fix OF module alias informationWei Yongjun
The module alias information passed to MODULE_DEVICE_TABLE() should use stm32_dt_ids instead of undefined sti_dt_ids. Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-28ixgbe: Acquire PHY semaphore before device resetPaul Greenwalt
A recent firmware change fixed an issue to acquire the PHY semaphore before accessing PHY registers. This led to a case where SW can issue a device reset clearing the MDIO registers. This patch makes SW acquire the PHY semaphore before issuing a device reset. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-28Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One odd config build fix for a recent Allwinner clock driver change that got merged. The common code called code in another file that wasn't always built. This just forces it on so people don't run into this bad configuration" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi-ng: always select CCU_GATE
2017-04-28libata: remove SCT WRITE SAME supportChristoph Hellwig
This was already disabled a while ago because it caused I/O errors, and it's severly getting into the way of the discard / write zeroes rework. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-04-28libata: reject passthrough WRITE SAME requestsChristoph Hellwig
The WRITE SAME to TRIM translation rewrites the DATA OUT buffer. While the SCSI code accomodates for this by passing a read-writable buffer userspace applications don't cater for this behavior. In fact it can be used to rewrite e.g. a readonly file through mmap and should be considered as a security fix. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-04-28Merge branches 'acpi-power', 'acpi-blacklist', 'acpi-video' and 'acpi-doc'Rafael J. Wysocki
* acpi-power: power: supply: axp288_charger: Only wait for INT3496 device if present ACPI / AC: Add a blacklist with PMIC ACPI HIDs with a native charger driver ACPI / battery: Add a blacklist with PMIC ACPI HIDs with a native battery driver ACPI / battery: Fix acpi_battery_exit on acpi_battery_init_async errors ACPI / utils: Add new acpi_dev_present helper * acpi-blacklist: ACPI / blacklist: add _REV quirk for Dell Inspiron 7537 * acpi-video: ACPI / video: add comments about subtle cases ACPI / video: get rid of magic numbers and use enum instead * acpi-doc: ACPI / doc: linuxized-acpica.txt: fix typos
2017-04-28Merge branches 'acpi-processor', 'acpi-cppc' and 'acpi-pmic'Rafael J. Wysocki
* acpi-processor: ACPI / Processor: Drop setup_max_cpus check from acpi_processor_add() * acpi-cppc: ACPI / CPPC: add sysfs entries for CPPC perf capabilities ACPI / CPPC: Read lowest nonlinear perf in cppc_get_perf_caps() * acpi-pmic: ACPI / PMIC: Stop xpower OPRegion handler relying on IIO ACPI / PMIC: Add opregion driver for Intel CHT Whiskey Cove PMIC
2017-04-28Merge branches 'acpi-scan', 'acpi-tables' and 'acpi-platform'Rafael J. Wysocki
* acpi-scan: ACPI / scan: Avoid enumerating devices more than once ACPI / scan: Apply default enumeration to devices with ACPI drivers ACPI / scan: Drop support for force_remove * acpi-tables: ACPI / tables: Drop acpi_parse_entries() which is not used * acpi-platform: ACPI / platform: Update platform device NUMA node based on _PXM method
2017-04-28Merge branches 'pm-cpuidle', 'pm-core', 'pm-domains', 'pm-avs' and 'pm-devfreq'Rafael J. Wysocki
* pm-cpuidle: cpuidle: powernv: Avoid a branch in the core snooze_loop() loop cpuidle: powernv: Don't continually set thread priority in snooze_loop() cpuidle: powernv: Don't bounce between low and very low thread priority cpuidle: cpuidle-cps: remove unused variable powernv-cpuidle: Validate DT property array size * pm-core: PM / runtime: Document autosuspend-helper side effects PM / runtime: Fix autosuspend documentation * pm-domains: PM / Domains: Ignore domain-idle-states that are not compatible PM / Domains: Don't warn about IRQ safe device for an always on PM domain PM / Domains: Respect errors from genpd's ->power_off() callback PM / Domains: Enable users of genpd to specify always on PM domains PM / Domains: Clean up code validating genpd's status PM / Domain: remove conditional from error case * pm-avs: PM / AVS: rockchip-io: add io selectors and supplies for rk3328 * pm-devfreq: PM / devfreq: Move struct devfreq_governor to devfreq directory
2017-04-28Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (37 commits) cpufreq: Add Tegra186 cpufreq driver cpufreq: imx6q: Fix error handling code cpufreq: imx6q: Set max suspend_freq to avoid changes during suspend cpufreq: imx6q: Fix handling EPROBE_DEFER from regulator cpufreq: schedutil: Use policy-dependent transition delays cpufreq: schedutil: Reduce frequencies slower cpufreq: intel_pstate: Add support for Gemini Lake cpufreq: intel_pstate: Eliminate intel_pstate_get_min_max() cpufreq: intel_pstate: Do not walk policy->cpus cpufreq: intel_pstate: Introduce pid_in_use() cpufreq: intel_pstate: Drop struct cpu_defaults cpufreq: intel_pstate: Move cpu_defaults definitions cpufreq: intel_pstate: Add update_util callback to pstate_funcs cpufreq: intel_pstate: Use different utilization update callbacks cpufreq: intel_pstate: Modify check in intel_pstate_update_status() cpufreq: intel_pstate: Drop driver_registered variable cpufreq: intel_pstate: Skip unnecessary PID resets on init cpufreq: intel_pstate: Set HWP sampling interval once cpufreq: intel_pstate: Clean up intel_pstate_busy_pid_reset() cpufreq: intel_pstate: Fold intel_pstate_reset_all_pid() into the caller ...
2017-04-28Merge schedutil governor updates for v4.12.Rafael J. Wysocki
2017-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Just a couple more stragglers, I really hope this is it. 1) Don't let frags slip down into the GRO segmentation handlers, from Steffen Klassert. 2) Truesize under-estimation triggers warnings in TCP over loopback with socket filters, 2 part fix from Eric Dumazet. 3) Fix undesirable reset of bonding MTU to ETH_HLEN on slave removal, from Paolo Abeni. 4) If we flush the XFRM policy after garbage collection, it doesn't work because stray entries can be created afterwards. Fix from Xin Long. 5) Hung socket connection fixes in TIPC from Parthasarathy Bhuvaragan. 6) Fix GRO regression with IPSEC when netfilter is disabled, from Sabrina Dubroca. 7) Fix cpsw driver Kconfig dependency regression, from Arnd Bergmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: hso: register netdev later to avoid a race condition net: adjust skb->truesize in ___pskb_trim() tcp: do not underestimate skb->truesize in tcp_trim_head() bonding: avoid defaulting hard_header_len to ETH_HLEN on slave removal ipv4: Don't pass IP fragments to upper layer GRO handlers. cpsw/netcp: refine cpts dependency tipc: close the connection if protocol messages contain errors tipc: improve error validations for sockets in CONNECTING state tipc: Fix missing connection request handling xfrm: fix GRO for !CONFIG_NETFILTER xfrm: do the garbage collection after flushing policy
2017-04-28Merge intel_pstate driver updates for v4.12.Rafael J. Wysocki
2017-04-28net: hso: register netdev later to avoid a race conditionAndreas Kemnade
If the netdev is accessed before the urbs are initialized, there will be NULL pointer dereferences. That is avoided by registering it when it is fully initialized. This case occurs e.g. if dhcpcd is running in the background and the device is probed, either after insmod hso or when the device appears on the usb bus. A backtrace is the following: [ 1357.356048] usb 1-2: new high-speed USB device number 12 using ehci-omap [ 1357.551177] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800 [ 1357.558654] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 1357.568572] usb 1-2: Product: Globetrotter HSUPA Modem [ 1357.574096] usb 1-2: Manufacturer: Option N.V. [ 1357.685882] hso 1-2:1.5: Not our interface [ 1460.886352] hso: unloaded [ 1460.889984] usbcore: deregistering interface driver hso [ 1513.769134] hso: ../drivers/net/usb/hso.c: Option Wireless [ 1513.846771] Unable to handle kernel NULL pointer dereference at virtual address 00000030 [ 1513.887664] hso 1-2:1.5: Not our interface [ 1513.906890] usbcore: registered new interface driver hso [ 1513.937988] pgd = ecdec000 [ 1513.949890] [00000030] *pgd=acd15831, *pte=00000000, *ppte=00000000 [ 1513.956573] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1513.962371] Modules linked in: hso usb_f_ecm omap2430 bnep bluetooth g_ether usb_f_rndis u_ether libcomposite configfs ipv6 arc4 wl18xx wlcore mac80211 cfg80211 bq27xxx_battery panel_tpo_td028ttec1 omapdrm drm_kms_helper cfbfillrect snd_soc_simple_card syscopyarea cfbimgblt snd_soc_simple_card_utils sysfillrect sysimgblt fb_sys_fops snd_soc_omap_twl4030 cfbcopyarea encoder_opa362 drm twl4030_madc_hwmon wwan_on_off snd_soc_gtm601 pwm_omap_dmtimer generic_adc_battery connector_analog_tv pwm_bl extcon_gpio omap3_isp wlcore_sdio videobuf2_dma_contig videobuf2_memops w1_bq27000 videobuf2_v4l2 videobuf2_core omap_hdq snd_soc_omap_mcbsp ov9650 snd_soc_omap bmp280_i2c bmg160_i2c v4l2_common snd_pcm_dmaengine bmp280 bmg160_core at24 bmc150_magn_i2c nvmem_core videodev phy_twl4030_usb bmc150_accel_i2c tsc2007 [ 1514.037384] bmc150_magn bmc150_accel_core media leds_tca6507 bno055 industrialio_triggered_buffer kfifo_buf gpio_twl4030 musb_hdrc snd_soc_twl4030 twl4030_vibra twl4030_madc twl4030_pwrbutton twl4030_charger industrialio w2sg0004 ehci_omap omapdss [last unloaded: hso] [ 1514.062622] CPU: 0 PID: 3433 Comm: dhcpcd Tainted: G W 4.11.0-rc8-letux+ #1 [ 1514.071136] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 1514.077758] task: ee748240 task.stack: ecdd6000 [ 1514.082580] PC is at hso_start_net_device+0x50/0xc0 [hso] [ 1514.088287] LR is at hso_net_open+0x68/0x84 [hso] [ 1514.093231] pc : [<bf79c304>] lr : [<bf79ced8>] psr: a00f0013 sp : ecdd7e20 ip : 00000000 fp : ffffffff [ 1514.105316] r10: 00000000 r9 : ed0e080c r8 : ecd8fe2c [ 1514.110839] r7 : bf79cef4 r6 : ecd8fe00 r5 : 00000000 r4 : ed0dbd80 [ 1514.117706] r3 : 00000000 r2 : c0020c80 r1 : 00000000 r0 : ecdb7800 [ 1514.124572] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 1514.132110] Control: 10c5387d Table: acdec019 DAC: 00000051 [ 1514.138153] Process dhcpcd (pid: 3433, stack limit = 0xecdd6218) [ 1514.144470] Stack: (0xecdd7e20 to 0xecdd8000) [ 1514.149078] 7e20: ed0dbd80 ecd8fe98 00000001 00000000 ecd8f800 ecd8fe00 ecd8fe60 00000000 [ 1514.157714] 7e40: ed0e080c bf79ced8 bf79ce70 ecd8f800 00000001 bf7a0258 ecd8f830 c068d958 [ 1514.166320] 7e60: c068d8b8 ecd8f800 00000001 00001091 00001090 c068dba4 ecd8f800 00001090 [ 1514.174926] 7e80: ecd8f940 ecd8f800 00000000 c068dc60 00000000 00000001 ed0e0800 ecd8f800 [ 1514.183563] 7ea0: 00000000 c06feaa8 c0ca39c2 beea57dc 00000020 00000000 306f7368 00000000 [ 1514.192169] 7ec0: 00000000 00000000 00001091 00000000 00000000 00000000 00000000 00008914 [ 1514.200805] 7ee0: eaa9ab60 beea57dc c0c9bfc0 eaa9ab40 00000006 00000000 00046858 c066a948 [ 1514.209411] 7f00: beea57dc eaa9ab60 ecc6b0c0 c02837b0 00000006 c0282c90 0000c000 c0283654 [ 1514.218017] 7f20: c09b0c00 c098bc31 00000001 c0c5e513 c0c5e513 00000000 c0151354 c01a20c0 [ 1514.226654] 7f40: c0c5e513 c01a3134 ecdd6000 c01a3160 ee7487f0 600f0013 00000000 ee748240 [ 1514.235260] 7f60: ee748734 00000000 ecc6b0c0 ecc6b0c0 beea57dc 00008914 00000006 00000000 [ 1514.243896] 7f80: 00046858 c02837b0 00001091 0003a1f0 00046608 0003a248 00000036 c01071e4 [ 1514.252502] 7fa0: ecdd6000 c0107040 0003a1f0 00046608 00000006 00008914 beea57dc 00001091 [ 1514.261108] 7fc0: 0003a1f0 00046608 0003a248 00000036 0003ac0c 00046608 00046610 00046858 [ 1514.269744] 7fe0: 0003a0ac beea57d4 000167eb b6f23106 400f0030 00000006 00000000 00000000 [ 1514.278411] [<bf79c304>] (hso_start_net_device [hso]) from [<bf79ced8>] (hso_net_open+0x68/0x84 [hso]) [ 1514.288238] [<bf79ced8>] (hso_net_open [hso]) from [<c068d958>] (__dev_open+0xa0/0xf4) [ 1514.296600] [<c068d958>] (__dev_open) from [<c068dba4>] (__dev_change_flags+0x8c/0x130) [ 1514.305023] [<c068dba4>] (__dev_change_flags) from [<c068dc60>] (dev_change_flags+0x18/0x48) [ 1514.313934] [<c068dc60>] (dev_change_flags) from [<c06feaa8>] (devinet_ioctl+0x348/0x714) [ 1514.322540] [<c06feaa8>] (devinet_ioctl) from [<c066a948>] (sock_ioctl+0x2b0/0x308) [ 1514.330627] [<c066a948>] (sock_ioctl) from [<c0282c90>] (vfs_ioctl+0x20/0x34) [ 1514.338165] [<c0282c90>] (vfs_ioctl) from [<c0283654>] (do_vfs_ioctl+0x82c/0x93c) [ 1514.346038] [<c0283654>] (do_vfs_ioctl) from [<c02837b0>] (SyS_ioctl+0x4c/0x74) [ 1514.353759] [<c02837b0>] (SyS_ioctl) from [<c0107040>] (ret_fast_syscall+0x0/0x1c) [ 1514.361755] Code: e3822103 e3822080 e1822781 e5981014 (e5832030) [ 1514.510833] ---[ end trace dfb3e53c657f34a0 ]--- Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28bonding: avoid defaulting hard_header_len to ETH_HLEN on slave removalPaolo Abeni
On slave list updates, the bonding driver computes its hard_header_len as the maximum of all enslaved devices's hard_header_len. If the slave list is empty, e.g. on last enslaved device removal, ETH_HLEN is used. Since the bonding header_ops are set only when the first enslaved device is attached, the above can lead to header_ops->create() being called with the wrong skb headroom in place. If bond0 is configured on top of ipoib devices, with the following commands: ifup bond0 for slave in $BOND_SLAVES_LIST; do ip link set dev $slave nomaster done ping -c 1 <ip on bond0 subnet> we will obtain a skb_under_panic() with a similar call trace: skb_push+0x3d/0x40 push_pseudo_header+0x17/0x30 [ib_ipoib] ipoib_hard_header+0x4e/0x80 [ib_ipoib] arp_create+0x12f/0x220 arp_send_dst.part.19+0x28/0x50 arp_solicit+0x115/0x290 neigh_probe+0x4d/0x70 __neigh_event_send+0xa7/0x230 neigh_resolve_output+0x12e/0x1c0 ip_finish_output2+0x14b/0x390 ip_finish_output+0x136/0x1e0 ip_output+0x76/0xe0 ip_local_out+0x35/0x40 ip_send_skb+0x19/0x40 ip_push_pending_frames+0x33/0x40 raw_sendmsg+0x7d3/0xb50 inet_sendmsg+0x31/0xb0 sock_sendmsg+0x38/0x50 SYSC_sendto+0x102/0x190 SyS_sendto+0xe/0x10 do_syscall_64+0x67/0x180 entry_SYSCALL64_slow_path+0x25/0x25 This change addresses the issue avoiding updating the bonding device hard_header_len when the slaves list become empty, forbidding to shrink it below the value used by header_ops->create(). The bug is there since commit 54ef31371407 ("[PATCH] bonding: Handle large hard_header_len") but the panic can be triggered only since commit fc791b633515 ("IB/ipoib: move back IB LL address into the hard header"). Reported-by: Norbert P <noe@physik.uzh.ch> Fixes: 54ef31371407 ("[PATCH] bonding: Handle large hard_header_len") Fixes: fc791b633515 ("IB/ipoib: move back IB LL address into the hard header") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28cpsw/netcp: refine cpts dependencyArnd Bergmann
Tony Lindgren reports a kernel oops that resulted from my compile-time fix on the default config. This shows two problems: a) configurations that did not already enable PTP_1588_CLOCK will now miss the cpts driver b) when cpts support is disabled, the driver crashes. This is a preexisting problem that we did not notice before my patch. While the second problem is still being investigated, this modifies the dependencies again, getting us back to the original state, with another 'select NET_PTP_CLASSIFY' added in to avoid the original link error we got, and the 'depends on POSIX_TIMERS' to hide the CPTS support when turning it on would be useless. Cc: stable@vger.kernel.org # 4.11 needs this Fixes: 07fef3623407 ("cpsw/netcp: cpts depends on posix_timers") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28ipmi/watchdog: fix wdog hang on panic waiting for ipmi responseRobert Lippert
Commit c49c097610fe ("ipmi: Don't call receive handler in the panic context") means that the panic_recv_free is not called during a panic and the atomic count does not drop to 0. Fix this by only expecting one decrement of the atomic variable which comes from panic_smi_free. Signed-off-by: Robert Lippert <rlippert@google.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-04-28Merge tag 'mac80211-next-for-davem-2017-04-28' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Another set of patches for -next: * API support for concurrent scheduled scan requests * API changes for roaming reporting * BSS max idle support in mac80211 * API changes for TX status reporting in mac80211 * API changes for RX rate reporting in mac80211 * rewrite monitor logic to prepare for BPF filters * bugfix for rare devices without 2.4 GHz support * a bugfix for recent DFS changes * some further cleanups The API changes are actually at a nice time, since it's typically quiet just before the merge window, and trees can be synchronized easily during it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "Yet another quirk to i8042 to get touchpad recognized on some laptops" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Clevo P650RS to the i8042 reset list
2017-04-28clk: sunxi-ng: always select CCU_GATEArnd Bergmann
When the base driver is enabled but all SoC specific drivers are turned off, we now get a build error after code was added to always refer to the clk gates: drivers/clk/built-in.o: In function `ccu_pll_notifier_cb': :(.text+0x154f8): undefined reference to `ccu_gate_helper_disable' :(.text+0x15504): undefined reference to `ccu_gate_helper_enable' This changes the Kconfig to always require the gate code to be built-in when CONFIG_SUNXI_CCU is set. Fixes: 02ae2bc6febd ("clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-28nbd: fix use after free on module unloadJosef Bacik
list_for_each_entry() isn't super safe if we're freeing the objects while we traverse the list. Also don't bother taking the extra reference, the module refcounting stuff will save us from having anybody messing with the device while we're trying to unload. Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-28mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046ayangbo lu
The ls1046a datasheet specified that the max SD clock frequency for eSDHC SDR104/HS200 was 167MHz, and the ls1012a datasheet specified it's 125MHz for ls1012a. So this patch is to add the limitation. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-28cfg80211: add request id to cfg80211_sched_scan_*() apiArend Van Spriel
Have proper request id filled in the SCHED_SCAN_RESULTS and SCHED_SCAN_STOPPED notifications toward user-space by having the driver provide it through the api. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mmc: sdhci-of-esdhc: poll ESDHC_CLOCK_STABLE bit with udelayyangbo lu
The loop to poll ESDHC_CLOCK_STABLE bit with mdelay would waste time because the time to stabilize is much less than 1 ms. This patch is to use udelay instead to avoid time wasting. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-28mmc: sdhci-xenon: Fix default value of LOGIC_TIMING_ADJUST for eMMC5.0 PHYHu Ziji
The default value of LOGIC_TIMING_ADJUST register in eMMC 5.0 PHY is different from that in eMMC 5.1 PHY. Set the specific value for that register in eMMC 5.0 PHY. Signed-off-by: Hu Ziji <huziji@marvell.com> Reported-by: Jisheng Zhang <jszhang@marvell.com> Tested-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-28mmc: sdhci-xenon: Fix the work flow in xenon_remove().Hu Ziji
sdhci_remove_host() might execute SOFT_RESET_ALL. Inside xenon_remove(), Xenon SDHC should be enabled during sdhci_remove_host(). Move xenon_sdhc_unprepare after sdhci_remove_host() such that Xenon SDHC is disabled after sdhci_remove_host() completes. Signed-off-by: Hu Ziji <huziji@marvell.com> Reported-by: Jisheng Zhang <jszhang@marvell.com> Tested-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-28cfg80211: unify cfg80211_roamed() and cfg80211_roamed_bss()Avraham Stern
cfg80211_roamed() and cfg80211_roamed_bss() take the same arguments except that cfg80211_roamed() requires the BSSID and cfg80211_roamed_bss() requires the bss entry. Unify the two functions by using a struct for driver initiated roaming information so that either the BSSID or the bss entry can be passed as an argument to the unified function. Signed-off-by: Avraham Stern <avraham.stern@intel.com> [modified the ath6k, brcm80211, rndis and wlan-ng drivers accordingly] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [modify brcmfmac to remove the useless cast, spotted by Arend] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: rename ieee80211_rx_status::vht_nss to just nssJohannes Berg
This field will need to be used again for HE, so rename it now. Again, mostly done with this spatch: @@ expression status; @@ -status->vht_nss +status->nss @@ expression status; @@ -status.vht_nss +status.nss Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg
We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28pinctrl: artpec6: Fix return value check in artpec6_pmx_probe()Wei Yongjun
In case of error, the function pinctrl_register() returns ERR_PTR() not NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-27Merge tag 'wireless-drivers-next-for-davem-2017-04-27' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.12 Few remaining patches for 4.12 submitted during the last week. Major changes: iwlwifi * the firmware for 7265D and 3168 NICs is frozen at version 29 * more support for the upcoming A000 series ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qed: Acquire/release ptt_ptp lock when enabling/disabling PTP.sudarsana.kalluru@cavium.com
Move the code for acquiring/releasing ptt_ptp lock to ptp specific implementations i.e., ptp_enable()/disable() respectively. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qed: Remove the un-needed ptp header file.sudarsana.kalluru@cavium.com
The patch deletes the qed_ptp.h file which is not required. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qede: Add support for PTP resource locking.sudarsana.kalluru@cavium.com
The patch adds necessary changes to the driver to use qed resource locking functionality. Currently the ptp initialization is spread between driver probe/open implementations, associated APIs are qede_ptp_register_phc()/qede_ptp_start(). Clubbed this functionality into single API qed_ptp_enable() to simplify the usage of qed resource locking implementation. The new API will be invoked in the probe path. Similarly the ptp clean-up code is moved to qede_ptp_disable() which gets invoked in the driver unload path. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qed: Add support for PTP resource locking.sudarsana.kalluru@cavium.com
The patch adds support for per-port resource lock in favour of PTP. PTP module acquires/releases the MFW resource lock while enabling/ disabling the PTP on the interface. The PF instance which has the ownership of this resource lock will get the exclusive access to the PTP clock functionality on the port. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qed: Add support for MFW resource locking.sudarsana.kalluru@cavium.com
The patch adds API for default initialization of the MFW resource locking. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27net: vrf: Do not allow looback to be moved to a VRFDavid Ahern
Moving the loopback into a VRF breaks networking for the default VRF. Since the VRF device is the loopback for VRF domains, there is no reason to move the loopback. Given the repercussions, block attempts to set lo into a VRF. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27Merge branch 'nvme-4.12' of git://git.infradead.org/nvme into ↵Jens Axboe
for-4.12/post-merge Christoph writes: "A couple more updates for 4.12. The biggest pile is fc and lpfc updates from James, but there are various small fixes and cleanups as well." Fixes up a few merge issues, and also a warning in lpfc_nvmet_rcv_unsol_abort() if CONFIG_NVME_TARGET_FC isn't enabled. Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-27mtip32xx: use runtime tag to initialize command headerMing Lei
mtip32xx supposes that 'request_idx' passed to .init_request() is tag of the request, and use that as request's tag to initialize command header. After MQ IO scheduler is in, request tag assigned isn't same with the request index anymore, so cause strange hardware failure on mtip32xx, even whole system panic is triggered. This patch fixes the issue by initializing command header via request's real tag. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-27EDAC, ghes: Do not enable it by defaultBorislav Petkov
Leave it to the user to decide whether to enable this or not. Otherwise, platform-specific drivers won't initialize (currently, EDAC supports only a single platform driver loaded). Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-27mailbox: handle empty message in tx_tickSudeep Holla
We already check if the message is empty before calling the client tx_done callback. Calling completion on a wait event is also invalid if the message is empty. This patch moves the existing empty message check earlier. Fixes: 2b6d83e2b8b7 ("mailbox: Introduce framework for mailbox") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-04-27mailbox: skip complete wait event if timer expiredSudeep Holla
If a wait_for_completion_timeout() call returns due to a timeout, complete() can get called after returning from the wait which is incorrect and can cause subsequent transmissions on a channel to fail. Since the wait_for_completion_timeout() sees the completion variable is non-zero caused by the erroneous/spurious complete() call, and it immediately returns without waiting for the time as expected by the client. This patch fixes the issue by skipping complete() call for the timer expiry. Fixes: 2b6d83e2b8b7 ("mailbox: Introduce framework for mailbox") Reported-by: Alexey Klimov <alexey.klimov@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-04-27mailbox: always wait in mbox_send_message for blocking Tx modeSudeep Holla
There exists a race when msg_submit return immediately as there was an active request being processed which may have completed just before it's checked again in mbox_send_message. This will result in return to the caller without waiting in mbox_send_message even when it's blocking Tx. This patch fixes the issue by waiting for the completion always if Tx is in blocking mode. Fixes: 2b6d83e2b8b7 ("mailbox: Introduce framework for mailbox") Reported-by: Alexey Klimov <alexey.klimov@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Alexey Klimov <alexey.klimov@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-04-27nvme-scsi: remove nvme_trans_security_protocolChristoph Hellwig
This function just returns the same error code and sense data as the default statement in the switch in the caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com>
2017-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26cfg80211: add request id parameter to .sched_scan_stop() signatureArend Van Spriel
For multiple scheduled scan support the driver needs to know which scheduled scan request is being stopped. Pass the request id in the .sched_scan_stop() callback. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-11 08:35:46 +0000