| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit ca62297b2085b5b3168bd891ca24862242c635a1.
Commit ca62297b2085 ("drm/edid: Fix csync detailed mode parsing") fixed
EDID detailed mode sync parsing. Unfortunately, there are quite a few
displays out there that have bogus (zero) sync field that are broken by
the change. Zero means analog composite sync, which is not right for
digital displays, and the modes get rejected. Regardless, it used to
work, and it needs to continue to work. Revert the change.
Rejecting modes with analog composite sync was the part that fixed the
gitlab issue 8146 [1]. We'll need to get back to the drawing board with
that.
[1] https://gitlab.freedesktop.org/drm/intel/-/issues/8146
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8789
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8930
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9044
Fixes: ca62297b2085 ("drm/edid: Fix csync detailed mode parsing")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.4+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230815101907.2900768-1-jani.nikula@intel.com
|
|
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
Add a basic pinctrl driver which supports driver strength for the
various pins, gpios, and pinmux for the 2 multi-function pins.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-5-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
The MFD component registers and initialises the device and provides
PM/system power management.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-4-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Currently the in-band alerts for SoundWire peripherals can only
be communicated to the driver through the interrupt_callback
function. This however is slightly inconvenient for devices that wish
to share IRQ handling code between SoundWire and I2C/SPI, the later
would normally register an IRQ handler with the IRQ subsystem. However
there is no reason the SoundWire in-band IRQs can not also be
communicated as an actual IRQ to the driver.
Add support for SoundWire peripherals to register a normal IRQ
handler to receive SoundWire in-band alerts, allowing code to be
shared across control buses. Note that we allow users to use both the
interrupt_callback and the IRQ handler, this is useful for devices
which must clear additional chip specific SoundWire registers that are
not a part of the normal IRQ flow, or the SoundWire specification.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-2-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Because the cost of calling tick_nohz_get_sleep_length() may increase
in the future, reorder the code in menu_select() so it first uses the
statistics to determine the expected idle duration. If that value is
higher than RESIDENCY_THRESHOLD_NS, tick_nohz_get_sleep_length() will
be called to obtain the time till the closest timer and refine the
idle duration prediction if necessary.
This causes the governor to always take the full overhead of
get_typical_interval() with the assumption that the cost will be
amortized by skipping the tick_nohz_get_sleep_length() call in the
cases when the predicted idle duration is relatively very small.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Doug Smythies <dsmythies@telus.net>
|
|
Move the acpi_bus_generate_netlink_event() invocation into
acpi_thermal_trips_update() which allows the code duplication in
acpi_thermal_notify() to be cleaned up, but for this purpose the
event value needs to be passed to acpi_thermal_trips_update() and
from there to acpi_thermal_adjust_thermal_zone() which has to
determine the flag value for __acpi_thermal_trips_update() by
itself.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Drop the .get_trip_type(), .get_trip_temp() and .get_crit_temp() thermal
zone callbacks that are not necessary any more from the ACPI thermal
driver along with the corresponding callback functions.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Rework the ACPI thermal driver's .get_trend() callback function,
thermal_get_trend(), so that it does not call thermal_get_trip_type()
and thermal_get_trip_temp() which are going to be dropped.
This reduces the overhead of the function too, because it will always
carry out a trip point lookup once after the change.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make the ACPI thermal driver use thermal_zone_device_register_with_trips()
to register its thermal zones.
For this purpose, make it create a trip point table that will be passed to
thermal_zone_device_register_with_trips() as an argument.
Also use the thermal_zone_update_trip_temp() helper introduced
previously to update temperatures of the passive and active trip
points after a trip points change notification from the platform
firmware.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Rework the currently unused __for_each_thermal_trip() to pass original
pointers to struct thermal_trip objects to the callback, so it can be
used for updating trip data (e.g. temperatures), rename it to
for_each_thermal_trip() and make it available to modular drivers.
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add struct acpi_thermal_trip to contain the temperature and valid flag
of each trip point in the driver's local data structures.
This helps to make the subsequent changes more straightforward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is a race condition between acpi_thermal_trips_update() and
acpi_thermal_check_fn(), because the trip points may get updated while
the latter is running which in theory may lead to inconsistent results.
For example, if two trips are updated together, using the temperature
value of one of them from before the update and the temperature value
of the other one from after the update may not lead to the expected
outcome.
Moreover, if thermal_get_trend() runs when a trip points update is in
progress, it may end up using stale trip point temperatures.
To address this, make acpi_thermal_trips_update() call
thermal_zone_device_exec() to carry out the trip points update and
use a new acpi_thermal_adjust_thermal_zone() wrapper around
__acpi_thermal_trips_update() as the callback function for the latter.
While at it, change the acpi_thermal_trips_update() return data type
to void as that function always returns 0 anyway.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Rename the trips variable in acpi_thermal_register_thermal_zone() to
trip_count so its name better reflects the purpose, rearrange white
space in the loop over active trips for clarity and reduce code
duplication related to calling thermal_zone_device_register() by
using an extra local variable to store the passive delay value.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce a new helper function, thermal_zone_device_exec(), that can
be used by drivers to run a given callback routine under the zone lock.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The function cppc_freq_invariance_init() may failed to create
kworker_fie, make it more robust by setting fie_disabled to FIE_DISBALED
to prevent an invalid pointer dereference in kthread_destroy_worker(),
which called from cppc_freq_invariance_exit().
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The cpufreq framework used to use the zero of return value to reflect
the cppc_cpufreq_get_rate() had failed to get current frequecy and treat
all positive integer to be succeed. Since cppc_get_perf_ctrs() returns a
negative integer in error case, so it is better to convert the value to
zero as the return value of cppc_cpufreq_get_rate().
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
When a cpufreq_policy is allocated, the cpus, related_cpus and real_cpus
of policy are still unset. Therefore, it is preferable to print the
passed 'cpu' parameter instead of a empty 'cpus' cpumask in error
message when registering MIN/MAX QoS notifier fails.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
If the switch is reset during active EEPROM transactions, as in
just after an SoC reset after power up, the I2C bus transaction
may be cut short leaving the EEPROM internal I2C state machine
in the wrong state. When the switch is reset again, the bad
state machine state may result in data being read from the wrong
memory location causing the switch to enter unexpected mode
rendering it inoperational.
Fixes: a3dcb3e7e70c ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset")
Signed-off-by: Alfred Lee <l00g33k@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 90bc21aaef4adaefceda2d385756138fc247c0c2.
Patch was merged too hastily, Vladimir requested changes in:
https://lore.kernel.org/all/20230816121305.5dio5tk3chge2ndh@skbuf/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nouveau_connector_create
We can't simply free the connector after calling drm_connector_init on it.
We need to clean up the drm side first.
It might not fix all regressions from commit 2b5d1c29f6c4
("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"),
but at least it fixes a memory corruption in error handling related to
that commit.
Link: https://lore.kernel.org/lkml/20230806213107.GFZNARG6moWpFuSJ9W@fat_crate.local/
Fixes: 95983aea8003 ("drm/nouveau/disp: add connector class")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814144933.3956959-1-kherbst@redhat.com
|
|
The cited patch change mlx5_cmd_update_root_ft() to work with multiple
peer devices. However, it didn't align the error flow as well.
Hence, Fix the error code to work with multiple peer devices.
Fixes: 222dd185833e ("{net/RDMA}/mlx5: introduce lag_for_each_peer")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Before this fix, running high rate traffic through XDP_REDIRECT
with multibuf could overrun the fifo used to release the
xdp frames after tx completion. This resulted in corrupted data
being consumed on the free side.
The culplirt was a miscalculation of the fifo size: the maximum ratio
between fifo entries / data segments was incorrect. This ratio serves to
calculate the max fifo size for a full sq where each packet uses the
worst case number of entries in the fifo.
This patch fixes the formula and names the constant. It also makes sure
that future values will use a power of 2 number of entries for the fifo
mask to work.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: 3f734b8c594b ("net/mlx5e: XDP, Use multiple single-entry objects in xdpi_fifo")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This reverts commit 27dd79c00aeab36cd7542c7a4481a32549038659.
It appears MPC_SPLIT_DYNAMIC still causes problems with multiple
displays on DCN2.0 hardware. Switch back to MPC_SPLIT_AVOID_MULT_DISP.
This increases power usage with multiple displays, but avoids hangs.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2475
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.4.x
|
|
DCN 3.1.4 is reported to hang on s2idle entry if graphics activity
is happening during entry. This is because GFXOFF was scheduled as
delayed but RLC gets disabled in s2idle entry sequence which will
hang GFX IP if not already in GFXOFF.
To help this problem, flush any delayed work for GFXOFF early in
s2idle entry sequence to ensure that it's off when RLC is changed.
commit 4b31b92b143f ("drm/amdgpu: complete gfxoff allow signal during
suspend without delay") modified power gating flow so that if called
in s0ix that it ensured that GFXOFF wasn't put in work queue but
instead processed immediately.
This is dead code due to commit 10cb67eb8a1b ("drm/amdgpu: skip
CG/PG for gfx during S0ix") because GFXOFF will now not be explicitly
called as part of the suspend entry code. Remove that dead code.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
GFX v11.0.1 reported fence fallback timer expired issue on
SDMA and GFX rings after S0ix resume. This is generated by
EOP interrupts are disabled when S0ix suspend but fails to
re-enable when resume because of the GFX is in GFXOFF.
[ 203.349571] [drm] Fence fallback timer expired on ring sdma0
[ 203.349572] [drm] Fence fallback timer expired on ring gfx_0.0.0
[ 203.861635] [drm] Fence fallback timer expired on ring gfx_0.0.0
For S0ix, GFX is in GFXOFF state, avoid to touch the GFX registers
to configure the fence driver interrupts for rings that belong to GFX.
The interrupts configuration will be restored by GFXOFF exit.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Return 0 when drm device alloc failed with -ENOSPC in
order to allow amdgpu drive loading. But the xcp without
drm device node assigned won't be visiable in user space.
This helps amdgpu driver loading on system which has more
than 64 nodes, the current limitation.
The proposal to add more drm nodes is discussed in public,
which will support up to 2^20 nodes totally.
kernel drm:
https://lore.kernel.org/lkml/20230724211428.3831636-1-michal.winiarski@intel.com/T/
libdrm:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/305
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update addresses of PCIE link width registers,
& link width format used to populate gpu metrics
table for smu v13.0.6
v2:
Removed ESM register update
v3:
Updated patch subject and message
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Temperature needs to be reported in millidegree Celsius.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the right metrics table version based on the firmware.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2720
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The parameter amdgpu_mcbp shall have priority against the default value
calculated from the chip version.
User could disable mcbp by setting the parameter mcbp as zero.
v2: do not trigger preemption in sw ring muxer when mcbp is disabled.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drm/amd/pm: disallow the fan setting if there is no fan on smu 13.0.0
V2: depend on pm.no_fan to check
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Finally, fix 3 structures which are allocated technically correctly,
i.e. the calculated size equals to the one that struct_size() would
return, except for sizeof(). For &virtchnl_vlan_filter_list_v2, use
the same approach when there are no enough space as taken previously
for &virtchnl_vlan_filter_list, i.e. let the maximum size be calculated
automatically instead of trying to guestimate it using maths.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There are five virtchnl structures, which are allocated and checked in
the code as `nents + 1`, meaning that they always have memory for one
excessive element regardless of their actual number. This comes from
that their sizeof() includes space for 1 element and then they get
allocated via struct_size() or its open-coded equivalents, passing
the actual number of elements.
Expand virtchnl_struct_size() to handle such structures and replace
those 1-elem arrays with proper flex ones. Also fix several places
which open-code %IAVF_VIRTCHNL_VF_RESOURCE_SIZE. Finally, let the
virtchnl_ether_addr_list size be computed automatically when there's
no enough space for the whole list, otherwise we have to open-code
reverse struct_size() logics.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The two most problematic virtchnl structures are virtchnl_rss_key and
virtchnl_rss_lut. Their "flex" arrays have the type of u8, thus, when
allocating / checking, the actual size is calculated as `sizeof +
nents - 1 byte`. But their sizeof() is not 1 byte larger than the size
of such structure with proper flex array, it's two bytes larger due to
the padding. That said, their size is always 1 byte larger unless
there are no tail elements -- then it's +2 bytes.
Add virtchnl_struct_size() macro which will handle this case (and later
other cases as well). Make its calling conv the same as we call
struct_size() to allow it to be drop-in, even though it's unlikely to
become possible to switch to generic API. The macro will calculate a
proper size of a structure with a flex array at the end, so that it
becomes transparent for the compilers, but add the difference from the
old values, so that the real size of sorta-ABI-messages doesn't change.
Use it on the allocation side in IAVF and the receiving side (defined
as static inline in virtchnl.h) for the mentioned two structures.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit 137380c0ec40 renamed 'rnbd-client' to 'rnbd_client', this changed
sysfs interface to /sys/devices/virtual/rnbd_client/ctl/map_device
from /sys/devices/virtual/rnbd-client/ctl/map_device.
CC: Ivan Orlov <ivan.orlov0322@gmail.com>
CC: "Md. Haris Iqbal" <haris.iqbal@ionos.com>
CC: Jack Wang <jinpu.wang@ionos.com>
Fixes: 137380c0ec40 ("block/rnbd: make all 'class' structures const")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20230816022210.2501228-1-lizhijian@fujitsu.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Change "write" into the actual "read" word.
Change parameters description.
Fixes: 7073f46e443e ("i40e: Add AQ commands for NVM Update for X722")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Return an error if a field's mask is neither full nor empty. When a mask
is only partial the field is not being used for rule programming but it
gives a wrong impression it is used. Fix by returning an error on any
partial mask to make it clear they are not supported.
The ip_ver assignment is moved earlier in code to allow using it in
iavf_validate_fdir_fltr_masks.
Fixes: 527691bf0682 ("iavf: Support IPv4 Flow Director filters")
Fixes: e90cbc257a6f ("iavf: Support IPv6 Flow Director filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add const definition to the initialized local variable name to avoid
overriding. Also the second parameter in strscpy is const char * instead of
char *.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230816135550.146657-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The clk_register_clkdev() allocates memory by calling vclkdev_alloc() and
this memory is not freed in the error path. Similarly, resources allocated
by clk_register_fixed_rate() are not freed in the error path.
Fix these issues by using devm_clk_hw_register_fixed_rate() and
devm_clk_hw_register_clkdev().
After this, the static variable clk is not needed. Replace it with
local variable hw in probe() and drop calling clk_unregister_fixed_rate()
from raa215300_rtc_unregister_device().
Fixes: 7bce16630837 ("regulator: Add Renesas PMIC RAA215300 driver")
Cc: stable@kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230816135550.146657-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge up v6.5-rc6 which has a fix that gets Synquacer netbooting so we
can include it in our testing.
|
|
In current driver, counter0 will be enabled after ddr_perf_pmu_enable()
is called even though none of the 4 counters are used. This will cause
counter0 continue to count until ddr_perf_pmu_disabled() is called. If
pmu is not disabled all the time, the pmu interrupt will be asserted
from time to time due to counter0 will overflow and irq handler will
clear it. It's not an expected behavior. This patch will not enable
counter0 if none of 4 counters are used.
Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230811015438.1999307-2-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For i.MX8MP, we cannot ensure that cycle counter overflow occurs at least
4 times as often as other events. Due to byte counters will count for any
event configured, it will overflow more often. And if byte counters
overflow that related counters would stop since they share the
COUNTER_CNTL. We can speed up cycle counter overflow frequency by setting
counter parameter (CP) field of cycle counter. In this way, we can avoid
stop counting byte counters when interrupt didn't come and the byte
counters can be fetched or updated from each cycle counter overflow
interrupt.
Because we initialize CP filed to shorten counter0 overflow time, the cycle
counter will start couting from a fixed/base value each time. We need to
remove the base from the result too. Therefore, we could get precise result
from cycle counter.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230811015438.1999307-1-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The PCIe PMUs locate on different NUMA node but currently we don't
consider it and likely stack all the sessions on the same CPU:
[root@localhost tmp]# cat /sys/devices/hisi_pcie*/cpumask
0
0
0
0
0
0
This can be optimize a bit to use a local CPU for the PMU.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20230815131010.2147-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
dependency
The following circular locking dependency was reported when running
cpus online/offline test on an arm64 system.
[ 84.195923] Chain exists of:
dmc620_pmu_irqs_lock --> cpu_hotplug_lock --> cpuhp_state-down
[ 84.207305] Possible unsafe locking scenario:
[ 84.213212] CPU0 CPU1
[ 84.217729] ---- ----
[ 84.222247] lock(cpuhp_state-down);
[ 84.225899] lock(cpu_hotplug_lock);
[ 84.232068] lock(cpuhp_state-down);
[ 84.238237] lock(dmc620_pmu_irqs_lock);
[ 84.242236]
*** DEADLOCK ***
The following locking order happens when dmc620_pmu_get_irq() calls
cpuhp_state_add_instance_nocalls().
lock(dmc620_pmu_irqs_lock) --> lock(cpu_hotplug_lock)
On the other hand, the calling sequence
cpuhp_thread_fun()
=> cpuhp_invoke_callback()
=> dmc620_pmu_cpu_teardown()
leads to the locking sequence
lock(cpuhp_state-down) => lock(dmc620_pmu_irqs_lock)
Here dmc620_pmu_irqs_lock protects both the dmc620_pmu_irqs and the
pmus_node lists in various dmc620_pmu instances. dmc620_pmu_get_irq()
requires protected access to dmc620_pmu_irqs whereas
dmc620_pmu_cpu_teardown() needs protection to the pmus_node lists.
Break this circular locking dependency by using two separate locks to
protect dmc620_pmu_irqs list and the pmus_node lists respectively.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20230812235549.494174-1-longman@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk
association") introduced new logic for gendisk association, requiring
drivers to explicitly call dax_add_host() and dax_remove_host().
For dcssblk driver, some dax_remove_host() calls were missing, e.g. in
device remove path. The commit also broke error handling for out_dax case
in device add path, resulting in an extra put_device() w/o the previous
get_device() in that case.
This lead to stale xarray entries after device add / remove cycles. In the
case when a previously used struct gendisk pointer (xarray index) would be
used again, because blk_alloc_disk() happened to return such a pointer, the
xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra
put_device() in the error path. In combination with an already flawed error
handling in dcssblk (device_register() cleanup), which needs to be
addressed in a separate patch, this resulted in a missing device_del() /
klist_del(), and eventually in the kernel crash with list_add corruption on
a subsequent device_add() / klist_add().
Fix this by adding the missing dax_remove_host() calls, and also move the
put_device() in the error path to restore the previous logic.
Fixes: fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association")
Cc: <stable@vger.kernel.org> # 5.17+
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.
For symmetry do the same with pfn_to_virt() reflecting the
current layout in asm-generic/page.h.
Doing this reveals a number of offenders in the arch code and
the S390-specific drivers, so just bite the bullet and fix up
all of those as well.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20230812-virt-to-phys-s390-v2-1-6c40f31fe36f@linaro.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Switch to use modern name function devm_spi_alloc_host().
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230816094013.1275068-15-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The documentation has not use the new name(host/target),
so keep the comment words same as documentation used.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230816093938.1274806-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After we remove a GPIO chip that still has some requested descriptors,
gpiod_free_commit() will fail and we will never put the references to the
GPIO device and the owning module in gpiod_free().
Rework this function to:
- not warn on desc == NULL as this is a use-case on which most free
functions silently return
- put the references to desc->gdev and desc->gdev->owner unconditionally
so that the release callback actually gets called when the remaining
references are dropped by external GPIO users
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
It seems that sysfs interface implicitly relied on the gpiod_free() to
unexport the line. This is logically incorrect as core gpiolib should
not deal with sysfs so instead of restoring it, let's call
gpiod_unexport() from sysfs code.
Fixes: b0ce9ce408b6 ("gpiolib: Do not unexport GPIO on freeing")
Reported-by: Marek Behún <kabel@kernel.org>
Closes: https://lore.kernel.org/r/20230808102828.4a9eac09@dellmb
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Behún <kabel@kernel.org>
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
