| Age | Commit message (Collapse) | Author |
|---|
|
When WoL is enabled, we update the software state in phylink to
indicate that the link is down, and disable the resolver from
bringing the link back up.
On resume, we attempt to bring the overall state into consistency
by calling the .mac_link_down() method, but this is wrong if the
link was already down, as phylink strictly orders the .mac_link_up()
and .mac_link_down() methods - and this would break that ordering.
Fixes: f97493657c63 ("net: phylink: add suspend/resume support")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u55Qf-0016RN-PA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since b255ce4388e0, it is possible that the CRTC timing
information for the preferred mode has not yet been
calculated while amdgpu_dm_connector_mode_valid() is running.
In this case use the CRTC timing information of the actual mode.
Fixes: b255ce4388e0 ("drm/amdgpu: don't change mode in amdgpu_dm_connector_mode_valid()")
Closes: https://lore.kernel.org/all/ed09edb167e74167a694f4854102a3de6d2f1433.camel@irl.hu/
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4085
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 20232192a5044d1f66dcbef0a24de1bb8157738d)
Cc: stable@vger.kernel.org
|
|
[Why]
Recent findings show negligible power savings between IPS2 and RCG
during static desktop. In fact, DCN related clocks are higher
when IPS2 is enabled vs RCG.
RCG_IN_ACTIVE is also the default policy for another OS supported by
DC, and it has faster entry/exit.
[How]
Remove previous logic that checked for IPS2 support, and just default
to `DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF`.
Fixes: 199888aa25b3 ("drm/amd/display: Update IPS default mode for DCN35/DCN351")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8f772d79ef39b463ead00ef6f009bebada3a9d49)
Cc: stable@vger.kernel.org
|
|
[Why/How]
LTTPR are required to program DPCD 0000Eh to 0x4 (16ms) upon AUX read
reply to this register. Since old Sinks witih DPCD rev 1.1 and earlier
may not support this register, assume the mandatory value is programmed
by the LTTPR to avoid AUX timeout issues.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1594b60d74959c0680ddf777a74963c98afcdd7e)
|
|
[Why]
The ACPI EDID in the BIOS of a Lenovo laptop includes 3 blocks, but
dm_helpers_probe_acpi_edid() has a start that is 'char'. The 3rd
block index starts after 255, so it can't be indexed properly.
This leads to problems with the display when the EDID is parsed.
[How]
Change the variable type to 'short' so that larger values can be indexed.
Cc: Renjith Pananchikkal <renjith.pananchikkal@amd.com>
Reported-by: Mark Pearson <mpearson@lenovo.com>
Suggested-by: David Ober <dober@lenovo.com>
Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a918bb4a90d423ced2976a794f2724c362c1f063)
Cc: stable@vger.kernel.org
|
|
If peer memory is accessible through XGMI, allow leaving it in VRAM
rather than forcing its migration to GTT on DMABuf attachment.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 372c8d72c3680fdea3fbb2d6b089f76b4a6d596a)
|
|
[Why]
Urgent latency adjustment was disabled on DCN35 due to issues with P0
enablement on some platforms. Without urgent latency, underflows occur
when doing certain high timing configurations. After testing, we found
that reenabling urgent latency didn't reintroduce p0 support on multiple
platforms.
[How]
renable urgent latency on DCN35 and setting it to 3000 Mhz.
This reverts commit 3412860cc4c0c484f53f91b371483e6e4440c3e5.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Susanto <nsusanto@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cd74ce1f0cddffb3f36d0995d0f61e89f0010738)
|
|
[Why]
While system undergoing gpu reset always do full update
to sync the dc state before and after reset.
[How]
Return true in should_reset_plane() if gpu reset detected
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2ba8619b9a378ad218ad6c2e2ccaee8f531e08de)
Cc: stable@vger.kernel.org
|
|
[Why]
The indexing of stream_status in dm_gpureset_commit_state() is incorrect.
That leads to asserts in multi-display configuration after gpu reset.
[How]
Adjust the indexing logic to align stream_status with surface_updates.
Fixes: cdaae8371aa9 ("drm/amd/display: Handle GPU reset for DC block")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3808
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d91bc901398741d317d9b55c59ca949d4bc7394b)
Cc: stable@vger.kernel.org
|
|
Pinning of VRAM is for peer devices that don't support dynamic attachment
and move notifiers. But it requires that all such peer devices are able to
access VRAM via PCIe P2P. Any device without P2P access requires migration
to GTT, which fails if the memory is already pinned for another peer
device.
Sharing between GPUs should not require pinning in VRAM. However, if
DMABUF_MOVE_NOTIFY is disabled in the kernel build, even DMABufs shared
between GPUs must be pinned, which can lead to failures and functional
regressions on systems where some peer GPUs are not P2P accessible.
Disable VRAM pinning if move notifiers are disabled in the kernel build
to fix regressions when sharing BOs between GPUs.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05185812ae3695fe049c14847ce3cbeccff1bf2e)
|
|
When determining the domains for pinning DMABufs, filter allowed_domains
and fail with a warning if VRAM is forbidden and GTT is not an allowed
domain.
Fixes: f5e7fabd1f5c ("drm/amdgpu: allow pinning DMA-bufs into VRAM if all importers can do P2P")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3940796a6eefa555fec688a4adee5659ef9fa431)
|
|
If an error occurs after a successful stm32_ospi_dma_setup() call, some
dma_release_channel() calls are needed to release some resources, as
already done in the remove function.
Fixes: 79b8a705e26c ("spi: stm32: Add OSPI driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/2674c8df1d05ab312826b69bfe9559f81d125a0b.1744975624.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With lan88xx based devices the lan78xx driver can get stuck in an
interrupt loop while bringing the device up, flooding the kernel log
with messages like the following:
lan78xx 2-3:1.0 enp1s0u3: kevent 4 may have been dropped
Removing interrupt support from the lan88xx PHY driver forces the
driver to use polling instead, which avoids the problem.
The issue has been observed with Raspberry Pi devices at least since
4.14 (see [1], bug report for their downstream kernel), as well as
with Nvidia devices [2] in 2020, where disabling interrupts was the
vendor-suggested workaround (together with the claim that phylib
changes in 4.9 made the interrupt handling in lan78xx incompatible).
Iperf reports well over 900Mbits/sec per direction with client in
--dualtest mode, so there does not seem to be a significant impact on
throughput (lan88xx device connected via switch to the peer).
[1] https://github.com/raspberrypi/linux/issues/2447
[2] https://forums.developer.nvidia.com/t/jetson-xavier-and-lan7800-problem/142134/11
Link: https://lore.kernel.org/0901d90d-3f20-4a10-b680-9c978e04ddda@lunn.ch
Fixes: 792aec47d59d ("add microchip LAN88xx phy driver")
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Cc: kernel-list@raspberrypi.com
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250416102413.30654-1-fiona.klute@gmx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On x86_64 with gcc version 13.3.0, I compile kernel with:
make defconfig
./scripts/kconfig/merge_config.sh .config <(
echo CONFIG_COMPILE_TEST=y
)
make KCFLAGS="-fno-inline-functions -fno-inline-small-functions -fno-inline-functions-called-once"
Then I get a linker error:
ld: vmlinux.o: in function `pxp_fw_dependencies_completed':
kintel_pxp.c:(.text+0x95728f): undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
This is caused by not having a intel_pxp_gsccs_is_ready_for_sessions()
header stub for CONFIG_DRM_I915_PXP=n. Add it.
Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Fixes: 99afb7cc8c44 ("drm/i915/pxp: Add ARB session creation and cleanup")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250415090616.2649889-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit b484c1e225a6a582fc78c4d7af7b286408bb7d41)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
When trying to enable a port that has no transport configured yet,
nvmet_enable_port() uses NVMF_TRTYPE_MAX (255) to query the transports
array, causing an out-of-bounds access:
[ 106.058694] BUG: KASAN: global-out-of-bounds in nvmet_enable_port+0x42/0x1da
[ 106.058719] Read of size 8 at addr ffffffff89dafa58 by task ln/632
[...]
[ 106.076026] nvmet: transport type 255 not supported
Since commit 200adac75888, NVMF_TRTYPE_MAX is the default state as configured by
nvmet_ports_make().
Avoid this by checking for NVMF_TRTYPE_MAX before proceeding.
Fixes: 200adac75888 ("nvme: Add PCI transport type")
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
|
|
commit a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity")
fixed reset signal polarity in jadard_dsi_probe() and jadard_prepare().
It was not done in jadard_unprepare() because of an incorrect assumption
about reset line handling in power off mode. After looking into the
datasheet, it now appears that before disabling regulators, the reset line
is deasserted first, and if reset_before_power_off_vcioo is true, then the
reset line is asserted.
Fix reset polarity by inverting gpiod_set_value() second argument in
in jadard_unprepare().
Fixes: 6b818c533dd8 ("drm: panel: Add Jadard JD9365DA-H3 DSI panel")
Fixes: 2b976ad760dc ("drm/panel: jd9365da: Support for kd101ne3-40ti MIPI-DSI panel")
Fixes: a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com
|
|
Christian reports that 4K output using YUV420 encoding fails with the
following error:
Fatal Error, invalid HDMI vclk freq 593406
Modetest shows the following:
3840x2160 59.94 3840 4016 4104 4400 2160 2168 2178 2250 593407 flags: xxxx, xxxx,
drm calculated value -------------------------------------^
This indicates that there's a (1kHz) mismatch between the clock
calculated by the drm framework and the meson driver.
Relevant function call stack:
(drm framework)
-> meson_encoder_hdmi_atomic_enable()
-> meson_encoder_hdmi_set_vclk()
-> meson_vclk_setup()
The video clock requested by the drm framework is 593407kHz. This is
passed by meson_encoder_hdmi_atomic_enable() to
meson_encoder_hdmi_set_vclk() and the following formula is applied:
- the frequency is halved (which would be 296703.5kHz) and rounded down
to the next full integer, which is 296703kHz
- TMDS clock is calculated (296703kHz * 10)
- video encoder clock is calculated - this needs to match a table from
meson_vclk.c and so it doubles the previously halved value again
(resulting in 593406kHz)
- meson_vclk_setup() can't find (either directly, or by deriving it from
594000kHz * 1000 / 1001 and rounding to the closest integer value -
which is 593407kHz as originally requested by the drm framework) a
matching clock in it's internal table and errors out with "invalid
HDMI vclk freq"
Fix the division precision by switching the whole meson driver to use
unsigned long long (64-bit) Hz values for clock frequencies instead of
unsigned int (32-bit) kHz to fix the rouding error.
Fixes: e5fab2ec9ca4 ("drm/meson: vclk: add support for YUV420 setup")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250421201300.778955-3-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250421201300.778955-3-martin.blumenstingl@googlemail.com
|
|
This reverts commit bfbc68e.
The patch does permit the offending YUV420 @ 59.94 phy_freq and
vclk_freq mode to match in calculations. It also results in all
fractional rates being unavailable for use. This was unintended
and requires the patch to be reverted.
Fixes: bfbc68e4d869 ("drm/meson: vclk: fix calculation of 59.94 fractional rates")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250421201300.778955-2-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250421201300.778955-2-martin.blumenstingl@googlemail.com
|
|
With ATA devices supporting the CDL feature, using CDL requires that the
feature be enabled with a SET FEATURES command. This command is issued
as the translated command for the MODE SELECT command issued by
scsi_cdl_enable() when the user enables CDL through the device
cdl_enable sysfs attribute.
However, the implementation of scsi_cdl_enable() always issues a MODE
SELECT command for ATA devices when the enable argument is true, even if
CDL is already enabled on the device. While this does not cause any
issue with using CDL descriptors with read/write commands (the CDL
feature will be enabled on the drive), issuing the MODE SELECT command
even when the device CDL feature is already enabled will cause a reset
of the ATA device CDL statistics log page (as defined in ACS, any CDL
enable action must reset the device statistics).
Avoid this needless actions (and the implied statistics log page reset)
by modifying scsi_cdl_enable() to issue the MODE SELECT command to
enable CDL if and only if CDL is not reported as already enabled on the
device.
And while at it, simplify the initialization of the is_ata boolean
variable and move the declaration of the scsi mode data and sense header
variables to within the scope of ATA device handling.
Fixes: 1b22cfb14142 ("scsi: core: Allow enabling and disabling command duration limits")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
With ATA devices supporting the CDL feature, using CDL requires that the
feature be enabled with a SET FEATURES command. This command is issued
as the translated command for the MODE SELECT command issued by
scsi_cdl_enable() when the user enables CDL through the device
cdl_enable sysfs attribute.
Currently, ata_mselect_control_ata_feature() always translates a MODE
SELECT command for the ATA features subpage of the control mode page to
a SET FEATURES command to enable or disable CDL based on the cdl_ctrl
field. However, there is no need to issue the SET FEATURES command if:
1) The MODE SELECT command requests disabling CDL and CDL is already
disabled.
2) The MODE SELECT command requests enabling CDL and CDL is already
enabled.
Fix ata_mselect_control_ata_feature() to issue the SET FEATURES command
only when necessary. Since enabling CDL also implies a reset of the CDL
statistics log page, avoiding useless CDL enable operations also avoids
clearing the CDL statistics log.
Also add debug messages to clearly signal when CDL is being enabled or
disabled using a SET FEATURES command.
Fixes: df60f9c64576 ("scsi: ata: libata: Add ATA feature control sub-page translation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
For the ATA features subpage of the control mode page, the T10 SAT-6
specifications state that:
For a MODE SENSE command, the SATL shall return the CDL_CTRL field value
that was last set by an application client.
However, the function ata_msense_control_ata_feature() always sets the
CDL_CTRL field to the 0x02 value to indicate support for the CDL T2A and
T2B pages. This is thus incorrect and the value 0x02 must be reported
only after the user enables the CDL feature, which is indicated with the
ATA_DFLAG_CDL_ENABLED device flag. When this flag is not set, the
CDL_CTRL field of the ATA feature subpage of the control mode page must
report a value of 0x00.
Fix ata_msense_control_ata_feature() to report the correct values for
the CDL_CTRL field, according to the enable/disable state of the device
CDL feature.
Fixes: df60f9c64576 ("scsi: ata: libata: Add ATA feature control sub-page translation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
The function ata_mselect_control_ata_feature() has a return type defined
as unsigned int but this function may return negative error codes, which
are correctly propagated up the call chain as integers.
Fix ata_mselect_control_ata_feature() to have the correct int return
type.
While at it, also fix a typo in this function description comment.
Fixes: df60f9c64576 ("scsi: ata: libata: Add ATA feature control sub-page translation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
Vlatko Markovikj reported that XDP programs attached to ENETC do not
work well if they use bpf_xdp_adjust_head() or bpf_xdp_adjust_tail(),
combined with the XDP_PASS verdict. A typical use case is to add or
remove a VLAN tag.
The resulting sk_buff passed to the stack is corrupted, because the
algorithm used by the driver for XDP_PASS is to unwind the current
buffer pointer in the RX ring and to re-process the current frame with
enetc_build_skb() as if XDP hadn't run. That is incorrect because XDP
may have modified the geometry of the buffer, which we then are
completely unaware of. We are looking at a modified buffer with the
original geometry.
The initial reaction, both from me and from Vlatko, was to shop around
the kernel for code to steal that would calculate a delta between the
old and the new XDP buffer geometry, and apply that to the sk_buff too.
We noticed that veth and generic xdp have such code.
The headroom adjustment is pretty uncontroversial, but what turned out
severely problematic is the tailroom.
veth has this snippet:
__skb_put(skb, off); /* positive on grow, negative on shrink */
which on first sight looks decent enough, except __skb_put() takes an
"unsigned int" for the second argument, and the arithmetic seems to only
work correctly by coincidence. Second issue, __skb_put() contains a
SKB_LINEAR_ASSERT(). It's not a great pattern to make more widespread.
The skb may still be nonlinear at that point - it only becomes linear
later when resetting skb->data_len to zero.
To avoid the above, bpf_prog_run_generic_xdp() does this instead:
skb_set_tail_pointer(skb, xdp->data_end - xdp->data);
skb->len += off; /* positive on grow, negative on shrink */
which is more open-coded, uses lower-level functions and is in general a
bit too much to spread around in driver code.
Then there is the snippet:
if (xdp_buff_has_frags(xdp))
skb->data_len = skb_shinfo(skb)->xdp_frags_size;
else
skb->data_len = 0;
One would have expected __pskb_trim() to be the function of choice for
this task. But it's not used in veth/xdpgeneric because the extraneous
fragments were _already_ freed by bpf_xdp_adjust_tail() ->
bpf_xdp_frags_shrink_tail() -> ... -> __xdp_return() - the backing
memory for the skb frags and the xdp frags is the same, but they don't
keep individual references.
In fact, that is the biggest reason why this snippet cannot be reused
as-is, because ENETC temporarily constructs an skb with the original len
and the original number of frags. Because the extraneous frags are
already freed by bpf_xdp_adjust_tail() and returned to the page
allocator, it means the entire approach of using enetc_build_skb() is
questionable for XDP_PASS. To avoid that, one would need to elevate the
page refcount of all frags before calling bpf_prog_run_xdp() and drop it
after XDP_PASS.
There are other things that are missing in ENETC's handling of XDP_PASS,
like for example updating skb_shinfo(skb)->meta_len.
These are all handled correctly and cleanly in commit 539c1fba1ac7
("xdp: add generic xdp_build_skb_from_buff()"), added to net-next in
Dec 2024, and in addition might even be quicker that way. I have a very
strong preference towards backporting that commit for "stable", and that
is what is used to fix the handling bugs. It is way too messy to go
this deep into the guts of an sk_buff from the code of a device driver.
Fixes: d1b15102dd16 ("net: enetc: add support for XDP_DROP and XDP_PASS")
Reported-by: Vlatko Markovikj <vlatko.markovikj@etas.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250417120005.3288549-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This small snippet of code ensures that we do something with the array
of RX software buffer descriptor elements after passing the skb to the
stack. In this case, we see if the other half of the page is reusable,
and if so, we "turn around" the buffers, making them directly usable by
enetc_refill_rx_ring() without going to enetc_new_page().
We will need to perform this kind of buffer flipping from a new code
path, i.e. from XDP_PASS. Currently, enetc_build_skb() does it there
buffer by buffer, but in a subsequent change we will stop using
enetc_build_skb() for XDP_PASS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250417120005.3288549-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At the time when bpf_xdp_adjust_tail() gained support for non-linear
buffers, ENETC was already generating this kind of geometry on RX, due
to its use of 2K half page buffers. Frames larger than 1472 bytes
(without FCS) are stored as multi-buffer, presenting a need for multi
buffer support to work properly even in standard MTU circumstances.
Allow bpf_xdp_frags_increase_tail() to know the allocation size of paged
data, so it can safely permit growing the tailroom of the buffer from
XDP programs.
Fixes: bf25146a5595 ("bpf: add frags support to the bpf_xdp_adjust_tail() API")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250417120005.3288549-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function xdp_convert_buff_to_frame() may return NULL if it fails
to correctly convert the XDP buffer into an XDP frame due to memory
constraints, internal errors, or invalid data. Failing to check for NULL
may lead to a NULL pointer dereference if the result is used later in
processing, potentially causing crashes, data corruption, or undefined
behavior.
On XDP redirect failure, the associated page must be released explicitly
if it was previously retained via get_page(). Failing to do so may result
in a memory leak, as the pages reference count is not decremented.
Cc: stable@vger.kernel.org # v5.9+
Fixes: 6c5aa6fc4def ("xen networking: add basic XDP support for xen-netfront")
Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru>
Link: https://patch.msgid.link/20250417122118.1009824-1-sdl@nppct.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure event logs are only generated when the debug logging level
MPI3_DEBUG_EVENT is enabled. This prevents unnecessary logging.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250415101546.204018-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add a NULL check for the returned hwq pointer by ufshcd_mcq_req_to_hwq().
This is similar to the fix in commit 74736103fb41 ("scsi: ufs: core: Fix
ufshcd_abort_one racing issue").
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250412195909.315418-1-chenyuan0y@gmail.com
Fixes: ab248643d3d6 ("scsi: ufs: core: Add error handling for MCQ mode")
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commands that have not been completed with scsi_done() do not clear the
SCMD_INITIALIZED flag and therefore will not be properly reinitialized.
Thus, the next time the scsi_cmnd structure is used, the command may
fail in scsi_cmd_runtime_exceeded() due to the old jiffies_at_alloc
value:
kernel: sd 16:0:1:84: [sdts] tag#405 timing out command, waited 720s
kernel: sd 16:0:1:84: [sdts] tag#405 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=66636s
Clear flags for commands that have not been completed by SCSI.
Fixes: 4abafdc4360d ("block: remove the initialize_rq_fn blk_mq_ops method")
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Link: https://lore.kernel.org/r/20250324084933.15932-2-a.kovaleva@yadro.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Relocate the memory allocation for ttc table after the switch statement
that validates params->ns_type in both mlx5_create_inner_ttc_table() and
mlx5_create_ttc_table(). This ensures memory is only allocated after
confirming valid input, eliminating potential memory leaks when invalid
ns_type cases occur.
Fixes: 137f3d50ad2a ("net/mlx5: Support matching on l4_type for ttc_table")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250418023814.71789-3-bsdhenrymartin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add NULL check for mlx5_get_flow_namespace() returns in
mlx5_create_inner_ttc_table() and mlx5_create_ttc_table() to prevent
NULL pointer dereference.
Fixes: 137f3d50ad2a ("net/mlx5: Support matching on l4_type for ttc_table")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250418023814.71789-2-bsdhenrymartin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to CXL r3.2 section 8.2.1.2, the PCI_COMMAND register fields,
including Memory Space Enable bit, have no effect on the behavior of an
RCD Upstream Port. Retaining this check may incorrectly cause
cxl_pci_probe() to fail on a valid RCD upstream Port.
While the specification is explicit only for RCD Upstream Ports, this
check is solely for accessing the RCRB, which is always mapped through
memory space. Therefore, its safe to remove the check entirely. In
practice, firmware reliably enables the Memory Space Enable bit for
RCH Downstream Ports and no failures have been observed.
Removing the check simplifies the code and avoids unnecessary
special-casing, while relying on BIOS/firmware to configure devices
correctly. Moreover, any failures due to inaccessible RCRB regions
will still be caught either in __rcrb_to_component() or while
parsing the component register block.
The following failure was observed in dmesg when the check was present:
cxl_pci 0000:7f:00.0: No component registers (-6)
Fixes: d5b1a27143cb ("cxl/acpi: Extract component registers of restricted hosts from RCRB")
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20250407192734.70631-1-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
The inclinometer channels were previously defined with 14 realbits.
However, the ADIS16201 datasheet states the resolution for these output
channels is 12 bits (Page 14, text description; Page 15, table 7).
Correct the realbits value to 12 to accurately reflect the hardware.
Fixes: f7fe1d1dd5a5 ("staging: iio: new adis16201 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250421131539.912966-1-gshahrouzi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Fix register read/write routine as per datasheet.
When reading multiple consecutive registers, only the first one is read
properly. This is due to missing chip select deassert and assert again
between first and second 16bit transfer, as shown in the datasheet
AD7606C-16, rev 0, figure 110.
Fixes: f2a22e1e172f ("iio: adc: ad7606: Add support for software mode for ad7616")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250418-wip-bl-ad7606-fix-reg-access-v3-1-d5eeb440c738@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure the struct itself it also 8-byte aligned.
While touching this, convert struct mpr_chan to an anonymous struct
to consolidate the code a bit to make it easier for future readers.
Fixes: 713337d9143e ("iio: pressure: Honeywell mprls0025pa pressure sensor")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250418-iio-more-timestamp-alignment-v2-2-d6a5d2b1c9fe@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Align the buffers used with iio_push_to_buffers_with_timestamp() to
ensure the s64 timestamp is aligned to 8 bytes.
Fixes: bac4368fab62 ("iio: imu: adis16550: add adis16550 support")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250418-iio-more-timestamp-alignment-v2-1-d6a5d2b1c9fe@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
I had left the warning around but as a non-fatal error to get my gcc-15
builds going, but fixed up some of the most annoying warning cases so
that it wouldn't be *too* verbose.
Because I like the _concept_ of the warning, even if I detested the
implementation to shut it up.
It turns out the implementation to shut it up is even more broken than I
thought, and my "shut up most of the warnings" patch just caused fatal
errors on gcc-14 instead.
I had tested with clang, but when I upgrade my development environment,
I try to do it on all machines because I hate having different systems
to maintain, and hadn't realized that gcc-14 now had issues.
The ACPI case is literally why I wanted to have a *type* that doesn't
trigger the warning (see commit d5d45a7f2619: "gcc-15: make
'unterminated string initialization' just a warning"), instead of
marking individual places as "__nonstring".
But gcc-14 doesn't like that __nonstring location that shut gcc-15 up,
because it's on an array of char arrays, not on one single array:
drivers/acpi/tables.c:399:1: error: 'nonstring' attribute ignored on objects of type 'const char[][4]' [-Werror=attributes]
399 | static const char table_sigs[][ACPI_NAMESEG_SIZE] __initconst __nonstring = {
| ^~~~~~
and my attempts to nest it properly with a type had failed, because of
how gcc doesn't like marking the types as having attributes, only
symbols.
There may be some trick to it, but I was already annoyed by the bad
attribute design, now I'm just entirely fed up with it.
I wish gcc had a proper way to say "this type is a *byte* array, not a
string".
The obvious thing would be to distinguish between "char []" and an
explicitly signed "unsigned char []" (as opposed to an implicitly
unsigned char, which is typically an architecture-specific default, but
for the kernel is universal thanks to '-funsigned-char').
But any "we can typedef a 8-bit type to not become a string just because
it's an array" model would be fine.
But "__attribute__((nonstring))" is sadly not that sane model.
Reported-by: Chris Clayton <chris2553@googlemail.com>
Fixes: 4b4bd8c50f48 ("gcc-15: acpi: sprinkle random '__nonstring' crumbles around")
Fixes: d5d45a7f2619 ("gcc-15: make 'unterminated string initialization' just a warning")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The C sequence points are complicated things, and gcc-15 has apparently
added a warning for the case where an object is both used and modified
multiple times within the same sequence point.
That's a great warning.
Or rather, it would be a great warning, except gcc-15 seems to not
really be very exact about it, and doesn't notice that the modification
are to two entirely different members of the same object: the array
counter and the array entries.
So that seems kind of silly.
That said, the code that gcc complains about is unnecessarily
complicated, so moving the array counter update into a separate
statement seems like the most straightforward fix for these warnings:
drivers/net/wireless/intel/iwlwifi/mld/d3.c: In function ‘iwl_mld_set_netdetect_info’:
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1102:66: error: operation on ‘netdetect_info->n_matches’ may be undefined [-Werror=sequence-point]
1102 | netdetect_info->matches[netdetect_info->n_matches++] = match;
| ~~~~~~~~~~~~~~~~~~~~~~~~~^~
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1120:58: error: operation on ‘match->n_channels’ may be undefined [-Werror=sequence-point]
1120 | match->channels[match->n_channels++] =
| ~~~~~~~~~~~~~~~~~^~
side note: the code at that second warning is actively buggy, and only
works on little-endian machines that don't do strict alignment checks.
The code casts an array of integers into an array of unsigned long in
order to use our bitmap iterators. That happens to work fine on any
sane architecture, but it's still wrong.
This does *not* fix that more serious problem. This only splits the two
assignments into two statements and fixes the compiler warning. I need
to get rid of the new warnings in order to be able to actually do any
build testing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
All of these cases are perfectly valid and good traditional C, but hit
by the "you're not NUL-terminating your byte array" warning.
And none of the cases want any terminating NUL character.
Mark them __nonstring to shut up gcc-15 (and in the case of the ak8974
magnetometer driver, I just removed the explicit array size and let gcc
expand the 3-byte and 6-byte arrays by one extra byte, because it was
the simpler change).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This removes two cases of explicit NUL padding that now causes warnings
because of '-Wunterminated-string-initialization' being part of -Wextra
in gcc-15.
Gcc is being silly in this case when it says that it truncates a NUL
terminator, because in these cases there were _multiple_ NUL characters.
But we can get rid of the warning by just simplifying the two
initializers that trigger the warning for me, so this does exactly that.
I'm not sure why the power supply code did that odd
.attr_name = #_name "\0",
pattern: it was introduced in commit 2cabeaf15129 ("power: supply: core:
Cleanup power supply sysfs attribute list"), but that 'attr_name[]'
field is an explicitly sized character array in a statically initialized
variable, and a string initializer always has a terminating NUL _and_
statically initialized character arrays are zero-padded anyway, so it
really seems to be rather extraneous belt-and-suspenders.
The zero_uuid[16] initialization in drivers/md/bcache/super.c makes
perfect sense, but it isn't necessary for the same reasons, and not
worth the new gcc warning noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is not great: I'd much rather introduce a typedef that is a "ACPI
name byte buffer", and use that to mark these special 4-byte ACPI names
that do not use NUL termination.
But as noted in the previous commit ("gcc-15: make 'unterminated string
initialization' just a warning") gcc doesn't actually seem to support
that notion, so instead you have to just mark every single array
declaration individually.
So this is not pretty, but this gets rid of the bulk of the annoying
warnings during an allmodconfig build for me.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- Address translator: fix wrong include
- ChromeOS EC tunnel: fix potential NULL pointer dereference
* tag 'i2c-for-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: atr: Fix wrong include
i2c: cros-ec-tunnel: defer probe if parent EC is not present
|
|
Pull drm fixes from Dave Airlie:
"Easter rc3 pull request, fixes in all the usuals, amdgpu, xe, msm,
with some i915/ivpu/mgag200/v3d fixes, then a couple of bits in
dma-buf/gem.
Hopefully has no easter eggs in it.
dma-buf:
- Correctly decrement refcounter on errors
gem:
- Fix test for imported buffers
amdgpu:
- Cleaner shader sysfs fix
- Suspend fix
- Fix doorbell free ordering
- Video caps fix
- DML2 memory allocation optimization
- HDP fix
i915:
- Fix DP DSC configurations that require 3 DSC engines per pipe
xe:
- Fix LRC address being written too late for GuC
- Fix notifier vs folio deadlock
- Fix race betwen dma_buf unmap and vram eviction
- Fix debugfs handling PXP terminations unconditionally
msm:
- Display:
- Fix to call dpu_plane_atomic_check_pipe() for both SSPPs in
case of multi-rect
- Fix to validate plane_state pointer before using it in
dpu_plane_virtual_atomic_check()
- Fix to make sure dereferencing dpu_encoder_phys happens after
making sure it is valid in _dpu_encoder_trigger_start()
- Remove the remaining intr_tear_rd_ptr which we initialized to
-1 because NO_IRQ indices start from 0 now
- GPU:
- Fix IB_SIZE overflow
ivpu:
- Fix debugging
- Fixes to frequency
- Support firmware API 3.28.3
- Flush jobs upon reset
mgag200:
- Set vblank start to correct values
v3d:
- Fix Indirect Dispatch"
* tag 'drm-fixes-2025-04-19' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/msm/a6xx+: Don't let IB_SIZE overflow
drm/xe/pxp: do not queue unneeded terminations from debugfs
drm/xe/dma_buf: stop relying on placement in unmap
drm/xe/userptr: fix notifier vs folio deadlock
drm/xe: Set LRC addresses before guc load
drm/mgag200: Fix value in <VBLKSTR> register
drm/gem: Internally test import_attach for imported objects
drm/amdgpu: Use the right function for hdp flush
drm/amd/display/dml2: use vzalloc rather than kzalloc
drm/amdgpu: Add back JPEG to video caps for carrizo and newer
drm/amdgpu: fix warning of drm_mm_clean
drm/amd: Forbid suspending into non-default suspend states
drm/amdgpu: use a dummy owner for sysfs triggered cleaner shaders v4
drm/i915/dp: Check for HAS_DSC_3ENGINES while configuring DSC slices
drm/i915/display: Add macro for checking 3 DSC engines
dma-buf/sw_sync: Decrement refcount on error in sw_sync_ioctl_get_deadline()
accel/ivpu: Add cmdq_id to job related logs
accel/ivpu: Show NPU frequency in sysfs
accel/ivpu: Fix the NPU's DPU frequency calculation
accel/ivpu: Update FW Boot API to version 3.28.3
...
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.15-rc3
Display:
- Fix to call dpu_plane_atomic_check_pipe() for both SSPPs in
case of multi-rect
- Fix to validate plane_state pointer before using it in
dpu_plane_virtual_atomic_check()
- Fix to make sure dereferencing dpu_encoder_phys happens after
making sure it is valid in _dpu_encoder_trigger_start()
- Remove the remaining intr_tear_rd_ptr which we initialized
to -1 because NO_IRQ indices start from 0 now
GPU:
- Fix IB_SIZE overflow
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/CAF6AEGtVKXEVdzUzFWmQE8JmK3nx_hp+ynOd-5j3vnfcU-sgOA@mail.gmail.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix LRC address being written too late for GuC
- Fix notifier vs folio deadlock
- Fix race betwen dma_buf unmap and vram eviction
- Fix debugfs handling PXP terminations unconditionally
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/ndinq644zenywaaycxyfqqivsb2xer4z7err3dlpalbz33jfkm@ttabzsg6wnet
|
|
The current reset pulse width is measured to be 5us on a
Renesas RZ/G2L SOM. The manufacturer's minimum reset pulse width is
specified as 10us.
Extend reset pulse width to make sure it is long enough on all platforms.
Also reword confusing comments about reset pin assertion.
Fixes: 5b0c03e24a06 ("Input: Add driver for Cypress Generation 5 touchscreen")
Cc: stable@vger.kernel.org
Acked-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250410184633.1164837-1-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Fix follow warnings with clang-21i (and reformat for clarity):
drivers/input/misc/sparcspkr.c:78:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
78 | case SND_TONE: break;
| ^
drivers/input/misc/sparcspkr.c:78:3: note: insert 'break;' to avoid fall-through
78 | case SND_TONE: break;
| ^
| break;
drivers/input/misc/sparcspkr.c:113:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
113 | case SND_TONE: break;
| ^
drivers/input/misc/sparcspkr.c:113:3: note: insert 'break;' to avoid fall-through
113 | case SND_TONE: break;
| ^
| break;
2 warnings generated.
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/r/6730E40353C76908+20250415052439.155051-1-wangyuli@uniontech.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
GCC 15's new -Wunterminated-string-initialization notices that the
16 character lookup table "nibbles" (which is not used as a C-String)
needs to be marked as "nonstring":
drivers/input/joystick/magellan.c: In function 'magellan_crunch_nibbles':
drivers/input/joystick/magellan.c:51:44: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
51 | static unsigned char nibbles[16] = "0AB3D56GH9:K<MN?";
| ^~~~~~~~~~~~~~~~~~
Add the annotation and While at it, mark the table as const too.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250416174513.work.662-kees@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
IB_SIZE is only b0..b19. Starting with a6xx gen3, additional fields
were added above the IB_SIZE. Accidentially setting them can cause
badness. Fix this by properly defining the CP_INDIRECT_BUFFER packet
and using the generated builder macro to ensure unintended bits are not
set.
v2: add missing type attribute for IB_BASE
v3: fix offset attribute in xml
Reported-by: Connor Abbott <cwabbott0@gmail.com>
Fixes: a83366ef19ea ("drm/msm/a6xx: add A640/A650 to gpulist")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/643396/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.15-rc3
- ChromeOS EC tunnel: fix potential NULL pointer dereference
|
