| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc irq fixes from Ingo Molnar:
- Fix BCM2712 irqchip driver Kconfig dependencies required on the
Raspberry PI5
- Fix spurious interrupts on RZ/G3E SMARC EVK systems
- Fix crash regression on Sun/NIU hardware
- Apply MSI driver quirk for Sun Neptune chips
* tag 'irq-urgent-2025-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-bcm2712-mip: Enable driver when ARCH_BCM2835 is enabled
irqchip/renesas-rzv2h: Prevent TINT spurious interrupt
net/niu: Niu requires MSIX ENTRY_DATA fields touch before entry reads
PCI/MSI: Add an option to write MSIX ENTRY_DATA before any reads
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- check for both the new AND old (deprecated) setter callback when
changing GPIO direction to output
* tag 'gpio-fixes-for-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Allow to use setters with return value for output-only gpios
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Add missing DVFS support flags for the Lunar Lake and Panther Lake
platforms to the int340x Intel thermal driver and fix DLVR support
for Panther Lake in it (Srinivas Pandruvada)"
* tag 'thermal-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: Fix Panther Lake DLVR support
thermal: intel: int340x: Add missing DVFS support flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These are mostly cpufreq fixes, some of which address recent
regressions and some address older issues that have come to light
during the last two weeks, and a runtime PM documentation correction:
- Fix the performance-to-frequency scaling factor computation on
systems using HWP in the intel_pstate driver after a recent
incorrect update of it (Rafael Wysocki)
- Fix the usage of the CPUFREQ_NEED_UPDATE_LIMITS cpufreq driver flag
in the schedutil cpufreq governor after a recent update of it that
has caused frequency limits changes to be missed sometimes (Rafael
Wysocki)
- Address some recently discovered synchronization issues related to
frequency limits changes in the schedutil cpufreq governor and in
the cpufreq core (Rafael Wysocki)
- Fix ITMT support in the amd-pstate cpufreq driver so that it is
enabled after asym priorities have been correctly initialized for
all CPUs (K Prateek Nayak)
- Fix changing min/max limits in the amd-pstate cpufreq driver while
on the performance governor (Dhananjay Ugwekar)
- Fix a function name in the runtime PM documentation that was
previously incorrectly updated by mistake (Sakari Ailus)"
* tag 'pm-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Avoid using inconsistent policy->min and policy->max
cpufreq/sched: Set need_freq_update in ignore_dl_rate_limit()
cpufreq/sched: Explicitly synchronize limits_changed flag handling
cpufreq/sched: Fix the usage of CPUFREQ_NEED_UPDATE_LIMITS
Documentation: PM: runtime: Fix a reference to pm_runtime_autosuspend()
cpufreq: intel_pstate: Fix hwp_get_cpu_scaling()
cpufreq/amd-pstate: Enable ITMT support after initializing core rankings
cpufreq/amd-pstate: Fix min_limit perf and freq updation for performance governor
|
|
CXL subsystem supports userspace to configure features via fwctl
interface, it will configure features by using Set Feature command.
Whatever Set Feature succeeds or fails, CXL driver always needs to
return a structure fwctl_rpc_cxl_out to caller, and returned size is
updated in a out_len parameter. The out_len should be updated not only
when the set feature succeeds, but also when the set feature fails.
Fixes: eb5dfcb9e36d ("cxl: Add support to handle user feature commands for set feature")
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250410024521.514095-1-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Testing revealed the following error message for a CXL memdev that has
Feature support:
[ 56.690430] cxl mem0: Resources present before probing
Attach the allocation of cxl_fwctl to the parent device of cxl_memdev.
devm_add_* calls for cxl_memdev should not happen before the memdev
probe function or outside the scope of the memdev driver.
cxl_test missed this bug because cxl_test always arranges for the
cxl_mem driver to be loaded before cxl_mock_mem runs. So the driver core
always finds the devres list idle in that case.
[DJ: Updated subject title and added commit log suggestion from djbw]
Fixes: 858ce2f56b52 ("cxl: Add FWCTL support to CXL")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/linux-cxl/6801aea053466_71fe2944c@dwillia2-xfh.jf.intel.com.notmuch/
Link: https://patch.msgid.link/20250418002933.406439-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Pull block fixes from Jens Axboe:
- MD pull via Yu:
- fix raid10 missing discard IO accounting (Yu Kuai)
- fix bitmap stats for bitmap file (Zheng Qixing)
- fix oops while reading all member disks failed during
check/repair (Meir Elisha)
- NVMe pull via Christoph:
- fix scan failure for non-ANA multipath controllers (Hannes
Reinecke)
- fix multipath sysfs links creation for some cases (Hannes
Reinecke)
- PCIe endpoint fixes (Damien Le Moal)
- use NULL instead of 0 in the auth code (Damien Le Moal)
- Various ublk fixes:
- Slew of selftest additions
- Improvements and fixes for IO cancelation
- Tweak to Kconfig verbiage
- Fix for page dirtying for blk integrity mapped pages
- loop fixes:
- buffered IO fix
- uevent fixes
- request priority inheritance fix
- Various little fixes
* tag 'block-6.15-20250417' of git://git.kernel.dk/linux: (38 commits)
selftests: ublk: add generic_06 for covering fault inject
ublk: simplify aborting ublk request
ublk: remove __ublk_quiesce_dev()
ublk: improve detection and handling of ublk server exit
ublk: move device reset into ublk_ch_release()
ublk: rely on ->canceling for dealing with ublk_nosrv_dev_should_queue_io
ublk: add ublk_force_abort_dev()
ublk: properly serialize all FETCH_REQs
selftests: ublk: move creating UBLK_TMP into _prep_test()
selftests: ublk: add test_stress_05.sh
selftests: ublk: support user recovery
selftests: ublk: support target specific command line
selftests: ublk: increase max nr_queues and queue depth
selftests: ublk: set queue pthread's cpu affinity
selftests: ublk: setup ring with IORING_SETUP_SINGLE_ISSUER/IORING_SETUP_DEFER_TASKRUN
selftests: ublk: add two stress tests for zero copy feature
selftests: ublk: run stress tests in parallel
selftests: ublk: make sure _add_ublk_dev can return in sub-shell
selftests: ublk: cleanup backfile automatically
selftests: ublk: add io_uring uapi header
...
|
|
The mode setting logic in ad7816_store_mode was reversed due to
incorrect handling of the strcmp return value. strcmp returns 0 on
match, so the `if (strcmp(buf, "full"))` block executed when the
input was not "full".
This resulted in "full" setting the mode to AD7816_PD (power-down) and
other inputs setting it to AD7816_FULL.
Fix this by checking it against 0 to correctly check for "full" and
"power-down", mapping them to AD7816_FULL and AD7816_PD respectively.
Fixes: 7924425db04a ("staging: iio: adc: new driver for AD7816 devices")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/stable/20250414152920.467505-1-gshahrouzi%40gmail.com
Link: https://patch.msgid.link/20250414154050.469482-1-gshahrouzi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
On architectures where an s64 is only 32-bit aligned insufficient padding
would be left between the earlier elements and the timestamp. Use
aligned_s64 to enforce the correct placement and ensure the storage is
large enough.
Fixes: 54e018da3141 ("iio:ad7266: Mark transfer buffer as __be16") # aligned_s64 is much newer.
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-2-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
On architectures where an s64 is not 64-bit aligned, this may result
insufficient alignment of the timestamp and the structure being too small.
Use aligned_s64 to force the alignment.
Fixes: a1caeebab07e ("iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()") # aligned_s64 newer
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-3-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Here the lack of marking allows the overall structure to not be
sufficiently aligned resulting in misplacement of the timestamp
in iio_push_to_buffers_with_timestamp(). Use aligned_s64 to
force the alignment on all architectures.
Fixes: 7c0299e879dd ("iio: adc: Add support for DLN2 ADC")
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The IIO ABI requires 64-bit aligned timestamps. In this case insufficient
padding would have been added on architectures where an s64 is only 32-bit
aligned. Use aligned_s64 to enforce the correct alignment.
Fixes: 327a0eaf19d5 ("iio: accel: adxl355: Add triggered buffer support")
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The trick of using __aligned(IIO_DMA_MINALIGN) ensures that there is
no overlap between buffers used for DMA and those used for driver
state storage that are before the marking. It doesn't ensure
anything above state variables found after the marking. Hence
move this particular bit of state earlier in the structure.
Fixes: 10897f34309b ("iio: temp: maxim_thermocouple: Fix alignment for DMA safety")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-14-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Also move the unaligned.h header while touching this since it was the
only one not in alphabetical order.
Fixes: 13e945631c2f ("iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-4-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Fixes: a5bf6fdd19c3 ("iio:chemical:sps30: Fix timestamp alignment")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-5-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Align the buffer used with iio_push_to_buffers_with_timestamp() to
ensure the s64 timestamp is aligned to 8 bytes.
Fixes: 0829edc43e0a ("iio: imu: inv_mpu6050: read the full fifo when processing data")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-7-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Although the support of VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 was
signaled by the commit 664ed90e621c ("vhost/scsi: Set
VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits"),
vhost_scsi_send_bad_target() still assumes the response in a single
descriptor.
Similar issue in vhost_scsi_send_bad_target() has been fixed in previous
commit. In addition, similar issue for vhost_scsi_complete_cmd_work() has
been fixed by the commit 6dd88fd59da8 ("vhost-scsi: unbreak any layout for
response").
Fixes: 3ca51662f818 ("vhost-scsi: Add better resource allocation failure handling")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20250403063028.16045-4-dongli.zhang@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Although the support of VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 was
signaled by the commit 664ed90e621c ("vhost/scsi: Set
VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits"),
vhost_scsi_send_bad_target() still assumes the response in a single
descriptor.
In addition, although vhost_scsi_send_bad_target() is used by both I/O
queue and control queue, the response header is always
virtio_scsi_cmd_resp. It is required to use virtio_scsi_ctrl_tmf_resp or
virtio_scsi_ctrl_an_resp for control queue.
Fixes: 664ed90e621c ("vhost/scsi: Set VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20250403063028.16045-3-dongli.zhang@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The vhost-scsi completion path may access vq->log_base when vq->log_used is
already set to false.
vhost-thread QEMU-thread
vhost_scsi_complete_cmd_work()
-> vhost_add_used()
-> vhost_add_used_n()
if (unlikely(vq->log_used))
QEMU disables vq->log_used
via VHOST_SET_VRING_ADDR.
mutex_lock(&vq->mutex);
vq->log_used = false now!
mutex_unlock(&vq->mutex);
QEMU gfree(vq->log_base)
log_used()
-> log_write(vq->log_base)
Assuming the VMM is QEMU. The vq->log_base is from QEMU userpace and can be
reclaimed via gfree(). As a result, this causes invalid memory writes to
QEMU userspace.
The control queue path has the same issue.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20250403063028.16045-2-dongli.zhang@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
According to section 5.3.6.2 (Multiport Device Operation) of the virtio
spec(version 1.2) a control buffer with the event VIRTIO_CONSOLE_RESIZE
is followed by a virtio_console_resize struct containing cols then rows.
The kernel implements this the wrong way around (rows then cols) resulting
in the two values being swapped.
Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com>
Message-Id: <20250324144300.905535-1-maxbr@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
As per virtio spec the fields cols and rows are specified as little
endian. Although there is no legacy interface requirement that would
state that cols and rows need to be handled as native endian when legacy
interface is used, unlike for the fields of the adjacent struct
virtio_console_control, I decided to err on the side of caution based
on some non-conclusive virtio spec repo archaeology and opt for using
virtio16_to_cpu() much like for virtio_console_control.event. Strictly
by the letter of the spec virtio_le_to_cpu() would have been sufficient.
But when the legacy interface is not used, it boils down to the same.
And when using the legacy interface, the device formatting these as
little endian when the guest is big endian would surprise me more than
it using guest native byte order (which would make it compatible with
the current implementation). Nevertheless somebody trying to implement
the spec following it to the letter could end up forcing little endian
byte order when the legacy interface is in use. So IMHO this ultimately
needs a judgement call by the maintainers.
Fixes: 8345adbf96fc1 ("virtio: console: Accept console size along with resize control message")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Cc: stable@vger.kernel.org # v2.6.35+
Message-Id: <20250322002954.3129282-1-pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
It looks like GPUs are used after shutdown is invoked.
Thus, breaking virtio gpu in the shutdown callback is not a good idea -
guest hangs attempting to finish console drawing, with these warnings:
[ 20.504464] WARNING: CPU: 0 PID: 568 at drivers/gpu/drm/virtio/virtgpu_vq.c:358 virtio_gpu_queue_ctrl_sgs+0x236/0x290 [virtio_gpu]
[ 20.505685] Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables nfnetlink vfat fat intel_rapl_msr intel_rapl_common intel_uncore_frequency_common nfit libnvdimm kvm_intel kvm rapl iTCO_wdt iTCO_vendor_support virtio_gpu virtio_dma_buf pcspkr drm_shmem_helper i2c_i801 drm_kms_helper lpc_ich i2c_smbus virtio_balloon joydev drm fuse xfs libcrc32c ahci libahci crct10dif_pclmul crc32_pclmul crc32c_intel libata virtio_net ghash_clmulni_intel net_failover virtio_blk failover serio_raw dm_mirror dm_region_hash dm_log dm_mod
[ 20.511847] CPU: 0 PID: 568 Comm: kworker/0:3 Kdump: loaded Tainted: G W ------- --- 5.14.0-578.6675_1757216455.el9.x86_64 #1
[ 20.513157] Hardware name: Red Hat KVM/RHEL, BIOS edk2-20241117-3.el9 11/17/2024
[ 20.513918] Workqueue: events drm_fb_helper_damage_work [drm_kms_helper]
[ 20.514626] RIP: 0010:virtio_gpu_queue_ctrl_sgs+0x236/0x290 [virtio_gpu]
[ 20.515332] Code: 00 00 48 85 c0 74 0c 48 8b 78 08 48 89 ee e8 51 50 00 00 65 ff 0d 42 e3 74 3f 0f 85 69 ff ff ff 0f 1f 44 00 00 e9 5f ff ff ff <0f> 0b e9 3f ff ff ff 48 83 3c 24 00 74 0e 49 8b 7f 40 48 85 ff 74
[ 20.517272] RSP: 0018:ff34f0a8c0787ad8 EFLAGS: 00010282
[ 20.517820] RAX: 00000000fffffffb RBX: 0000000000000000 RCX: 0000000000000820
[ 20.518565] RDX: 0000000000000000 RSI: ff34f0a8c0787be0 RDI: ff218bef03a26300
[ 20.519308] RBP: ff218bef03a26300 R08: 0000000000000001 R09: ff218bef07224360
[ 20.520059] R10: 0000000000008dc0 R11: 0000000000000002 R12: ff218bef02630028
[ 20.520806] R13: ff218bef0263fb48 R14: ff218bef00cb8000 R15: ff218bef07224360
[ 20.521555] FS: 0000000000000000(0000) GS:ff218bef7ba00000(0000) knlGS:0000000000000000
[ 20.522397] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 20.522996] CR2: 000055ac4f7871c0 CR3: 000000010b9f2002 CR4: 0000000000771ef0
[ 20.523740] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 20.524477] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 20.525223] PKRU: 55555554
[ 20.525515] Call Trace:
[ 20.525777] <TASK>
[ 20.526003] ? show_trace_log_lvl+0x1c4/0x2df
[ 20.526464] ? show_trace_log_lvl+0x1c4/0x2df
[ 20.526925] ? virtio_gpu_queue_fenced_ctrl_buffer+0x82/0x2c0 [virtio_gpu]
[ 20.527643] ? virtio_gpu_queue_ctrl_sgs+0x236/0x290 [virtio_gpu]
[ 20.528282] ? __warn+0x7e/0xd0
[ 20.528621] ? virtio_gpu_queue_ctrl_sgs+0x236/0x290 [virtio_gpu]
[ 20.529256] ? report_bug+0x100/0x140
[ 20.529643] ? handle_bug+0x3c/0x70
[ 20.530010] ? exc_invalid_op+0x14/0x70
[ 20.530421] ? asm_exc_invalid_op+0x16/0x20
[ 20.530862] ? virtio_gpu_queue_ctrl_sgs+0x236/0x290 [virtio_gpu]
[ 20.531506] ? virtio_gpu_queue_ctrl_sgs+0x174/0x290 [virtio_gpu]
[ 20.532148] virtio_gpu_queue_fenced_ctrl_buffer+0x82/0x2c0 [virtio_gpu]
[ 20.532843] virtio_gpu_primary_plane_update+0x3e2/0x460 [virtio_gpu]
[ 20.533520] drm_atomic_helper_commit_planes+0x108/0x320 [drm_kms_helper]
[ 20.534233] drm_atomic_helper_commit_tail+0x45/0x80 [drm_kms_helper]
[ 20.534914] commit_tail+0xd2/0x130 [drm_kms_helper]
[ 20.535446] drm_atomic_helper_commit+0x11b/0x140 [drm_kms_helper]
[ 20.536097] drm_atomic_commit+0xa4/0xe0 [drm]
[ 20.536588] ? __pfx___drm_printfn_info+0x10/0x10 [drm]
[ 20.537162] drm_atomic_helper_dirtyfb+0x192/0x270 [drm_kms_helper]
[ 20.537823] drm_fbdev_shmem_helper_fb_dirty+0x43/0xa0 [drm_shmem_helper]
[ 20.538536] drm_fb_helper_damage_work+0x87/0x160 [drm_kms_helper]
[ 20.539188] process_one_work+0x194/0x380
[ 20.539612] worker_thread+0x2fe/0x410
[ 20.540007] ? __pfx_worker_thread+0x10/0x10
[ 20.540456] kthread+0xdd/0x100
[ 20.540791] ? __pfx_kthread+0x10/0x10
[ 20.541190] ret_from_fork+0x29/0x50
[ 20.541566] </TASK>
[ 20.541802] ---[ end trace 0000000000000000 ]---
It looks like the shutdown is called in the middle of console drawing, so
we should either wait for it to finish, or let drm handle the shutdown.
This patch implements this second option:
Add an option for drivers to bypass the common break+reset handling.
As DRM is careful to flush/synchronize outstanding buffers, it looks like
GPU can just have a NOP there.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Fixes: 8bd2fa086a04 ("virtio: break and reset virtio devices on device_shutdown()")
Cc: Eric Auger <eauger@redhat.com>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <8490dbeb6f79ed039e6c11d121002618972538a3.1744293540.git.mst@redhat.com>
|
|
PCI resource fitting code in __assign_resources_sorted() runs in multiple
steps. A resource that was successfully assigned may have to be released
before the next step attempts assignment again. The assign+release cycle is
destructive to a start-aligned struct resource (bridge window or IOV
resource) because the start field is overwritten with the real address when
the resource got assigned.
One symptom:
pci 0002:00:00.0: bridge window [mem size 0x00100000]: can't assign; bogus alignment
Properly restore the resource after releasing it. The start, end, and flags
fields must be stored into the related struct pci_dev_resource in order to
be able to restore the resource to its original state.
Fixes: 96336ec70264 ("PCI: Perform reset_resource() and build fail list in sync")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/r/01eb7d40-f5b5-4ec5-b390-a5c042c30aff@roeck-us.net/
Reported-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Closes: https://lore.kernel.org/r/3578030.5fSG56mABF@workhorse
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ondrej Jirman <megi@xff.cz>
Link: https://patch.msgid.link/20250403093137.1481-1-ilpo.jarvinen@linux.intel.com
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.15-rc3
Here's a new simple driver for Owon oscilloscopes and a couple of new
new modem and smart meter device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.15-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: simple: add OWON HDS200 series oscilloscope support
USB: serial: ftdi_sio: add support for Abacus Electrics Optical Probe
USB: serial: option: add Sierra Wireless EM9291
|
|
The PXP terminate debugfs currently unconditionally simulates a
termination, no matter what the HW status is. This is unneeded if PXP is
not in use and can cause errors if the HW init hasn't completed yet.
To solve these issues, we can simply limit the terminations to the cases
where PXP is fully initialized and in use.
v2: s/pxp_status/ready/ to avoid confusion with pxp->status (John)
Fixes: 385a8015b214 ("drm/xe/pxp: Add PXP debugfs support")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4749
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250416201622.1295369-1-daniele.ceraolospurio@intel.com
(cherry picked from commit ba1f62a0cac84757ca35f4217e3cd3a2654233ae)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The is_vram() is checking the current placement, however if we consider
exported VRAM with dynamic dma-buf, it looks possible for the xe driver
to async evict the memory, notifying the importer, however importer does
not have to call unmap_attachment() immediately, but rather just as
"soon as possible", like when the dma-resv idles. Following from this we
would then pipeline the move, attaching the fence to the manager, and
then update the current placement. But when the unmap_attachment() runs
at some later point we might see that is_vram() is now false, and take
the complete wrong path when dma-unmapping the sg, leading to
explosions.
To fix this check if the sgl was mapping a struct page.
v2:
- The attachment can be mapped multiple times it seems, so we can't
really rely on encoding something in the attachment->priv. Instead
see if the page_link has an encoded struct page. For vram we expect
this to be NULL.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4563
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250410162716.159403-2-matthew.auld@intel.com
(cherry picked from commit d755887f8e5a2a18e15e6632a5193e5feea18499)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
User is reporting what smells like notifier vs folio deadlock, where
migrate_pages_batch() on core kernel side is holding folio lock(s) and
then interacting with the mappings of it, however those mappings are
tied to some userptr, which means calling into the notifier callback and
grabbing the notifier lock. With perfect timing it looks possible that
the pages we pulled from the hmm fault can get sniped by
migrate_pages_batch() at the same time that we are holding the notifier
lock to mark the pages as accessed/dirty, but at this point we also want
to grab the folio locks(s) to mark them as dirty, but if they are
contended from notifier/migrate_pages_batch side then we deadlock since
folio lock won't be dropped until we drop the notifier lock.
Fortunately the mark_page_accessed/dirty is not really needed in the
first place it seems and should have already been done by hmm fault, so
just remove it.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4765
Fixes: 0a98219bcc96 ("drm/xe/hmm: Don't dereference struct page pointers without notifier lock")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250414132539.26654-2-matthew.auld@intel.com
(cherry picked from commit bd7c0cb695e87c0e43247be8196b4919edbe0e85)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The metadata saved in the ADS is read by GuC when it's initialized.
Saving the addresses to the LRCs when they are populated is too late as
GuC will keep using the old ones.
This was causing GuC to use the RCS LRC for any engine class. It's not a
big problem on a Linux-only scenario since the they are used by GuC only
on media engines when the watchdog is triggered. However, in a
virtualization scenario with Windows as the VF, it causes the wrong LRCs
to be loaded as the watchdog is used for all engines.
Fix it by letting guc_golden_lrc_init() initialize the metadata, like
other *_init() functions, and later guc_golden_lrc_populate() to copy
the LRCs to the right places. The former is called before the second GuC
load, while the latter is called after LRCs have been recorded.
Cc: Chee Yin Wong <chee.yin.wong@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org> # v6.11+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Chee Yin Wong <chee.yin.wong@intel.com>
Link: https://lore.kernel.org/r/20250409-fix-guc-ads-v1-1-494135f7a5d0@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit c31a0b6402d15b530514eee9925adfcb8cfbb1c9)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Revert a reset patch that broke VFIO passthrough because devices
ended up with no available reset mechanisms (Alex Williamson)
* tag 'pci-v6.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: Avoid reset when disabled via sysfs"
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
dma-buf:
- Correctly decrement refcounter on errors
gem:
- Fix test for imported buffers
ivpu:
- Fix debugging
- Fixes to frequency
- Support firmware API 3.28.3
- Flush jobs upon reset
mgag200:
- Set vblank start to correct values
v3d:
- Fix Indirect Dispatch
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250417084043.GA365738@linux.fritz.box
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
drm/i915 fixes for v6.15-rc3:
- Fix DP DSC configurations that require 3 DSC engines per pipe
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/87fri7p8tp.fsf@intel.com
|
|
Pull vfio fix from Alex Williamson:
- Include devices where the platform indicates PCI INTx is not routed
by setting pdev->irq to zero in the expanded virtualization of the
PCI pin register. This provides consistency in the INFO and SET_IRQS
ioctls (Alex Williamson)
* tag 'vfio-v6.15-rc3' of https://github.com/awilliam/linux-vfio:
vfio/pci: Virtualize zero INTx PIN if no pdev->irq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few more device specific fixes plus one trivial quirk.
There's a couple of patches for Tegra which avoid some fairly
spectacular log spam if the hardware breaks in ways which were
actually seen in production, plus a fix for the i.MX driver to
propagate errors properly when setting up the hardware.
We also have a trivial patch marking the sun4i driver as being
compatible with GPIO chip selects"
* tag 'spi-fix-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-imx: Add check for spi_imx_setupxfer()
spi: tegra210-quad: add rate limiting and simplify timeout error message
spi: tegra210-quad: use WARN_ON_ONCE instead of WARN_ON for timeouts
spi: sun4i: add support for GPIO chip select lines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, CAN and Netfilter.
Current release - regressions:
- two fixes for the netdev per-instance locking
- batman-adv: fix double-hold of meshif when getting enabled
Current release - new code bugs:
- Bluetooth: increment TX timestamping tskey always for stream
sockets
- wifi: static analysis and build fixes for the new Intel sub-driver
Previous releases - regressions:
- net: fib_rules: fix iif / oif matching on L3 master (VRF) device
- ipv6: add exception routes to GC list in rt6_insert_exception()
- netfilter: conntrack: fix erroneous removal of offload bit
- Bluetooth:
- fix sending MGMT_EV_DEVICE_FOUND for invalid address
- l2cap: process valid commands in too long frame
- btnxpuart: Revert baudrate change in nxp_shutdown
Previous releases - always broken:
- ethtool: fix memory corruption during SFP FW flashing
- eth:
- hibmcge: fixes for link and MTU handling, pause frames etc
- igc: fixes for PTM (PCIe timestamping)
- dsa: b53: enable BPDU reception for management port
Misc:
- fixes for Netlink protocol schemas"
* tag 'net-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: ethernet: mtk_eth_soc: revise QDMA packet scheduler settings
net: ethernet: mtk_eth_soc: correct the max weight of the queue limit for 100Mbps
net: ethernet: mtk_eth_soc: reapply mdc divider on reset
net: ti: icss-iep: Fix possible NULL pointer dereference for perout request
net: ti: icssg-prueth: Fix possible NULL pointer dereference inside emac_xmit_xdp_frame()
net: ti: icssg-prueth: Fix kernel warning while bringing down network interface
netfilter: conntrack: fix erronous removal of offload bit
net: don't try to ops lock uninitialized devs
ptp: ocp: fix start time alignment in ptp_ocp_signal_set
net: dsa: avoid refcount warnings when ds->ops->tag_8021q_vlan_del() fails
net: dsa: free routing table on probe failure
net: dsa: clean up FDB, MDB, VLAN entries on unbind
net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported
net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered
net: txgbe: fix memory leak in txgbe_probe() error path
net: bridge: switchdev: do not notify new brentries as changed
net: b53: enable BPDU reception for management port
netlink: specs: rt-neigh: prefix struct nfmsg members with ndm
netlink: specs: rt-link: adjust mctp attribute naming
netlink: specs: rtnetlink: attribute naming corrections
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull fwctl fixes from Jason Gunthorpe:
"Three small changes from further build testing:
- Don't rely on the userspace uuid.h for the uapi header
- Fix sparse warnings in pds
- Typo in log message"
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
fwctl: Fix repeated device word in log message
pds_fwctl: Fix type and endian complaints
fwctl/cxl: Fix uuid_t usage in uapi
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All are device-specific like quirks, new
IDs, and other safe (or rather boring) changes"
* tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version
ASoC: codecs: Add of_match_table for aw888081 driver
ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START event
mailmap: Add entry for Srinivas Kandagatla
MAINTAINERS: use kernel.org alias
ASoC: cs42l43: Reset clamp override on jack removal
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ALSA: hda/cirrus_scodec_test: Don't select dependencies
ALSA: azt2320: Replace deprecated strcpy() with strscpy()
ASoC: hdmi-codec: use RTD ID instead of DAI ID for ELD entry
ASoC: Intel: avs: Constrain path based on BE capabilities
ALSA: hda/tas2781: Remove unnecessary NULL check before release_firmware()
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
ASoC: fsl_asrc_dma: get codec or cpu dai from backend
ASoC: qcom: Fix sc7280 lpass potential buffer overflow
ASoC: dwc: always enable/disable i2s irqs
ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S16
ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels
ASoC: codecs:lpass-wsa-macro: Fix vi feedback rate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Fixes:
- amd/pmf: Fix STT limits
- asus-laptop: Fix an uninitialized variable
- intel_pmc_ipc: Allow building without ACPI
- mlxbf-bootctl: Use sysfs_emit_at() in secure_boot_fuse_state_show()
- msi-wmi-platform: Add locking to workaround ACPI firmware bug
New HW support:
- alienware-wmi-wmax:
- Extended thermal control support to:
- Alienware Area-51m R2
- Alienware m16 R1
- Alienware m16 R2
- Dell G16 7630
- Dell G5 5505 SE
- G-Mode support to Alienware m16 R1
- x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data"
* tag 'platform-drivers-x86-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: msi-wmi-platform: Workaround a ACPI firmware bug
platform/x86: msi-wmi-platform: Rename "data" variable
platform/x86: alienware-wmi-wmax: Extend support to more laptops
platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1
platform/x86: amd: pmf: Fix STT limits
mlxbf-bootctl: use sysfs_emit_at() in secure_boot_fuse_state_show()
platform/x86: x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data
platform/x86: x86-android-tablets: Add "9v" to Vexia EDU ATLA 10 tablet symbols
asus-laptop: Fix an uninitialized variable
platform/x86: intel_pmc_ipc: add option to build without ACPI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Small drivers fixes, except for ufs which has two large updates, one
for exposing the device level feature, which is a new addition to the
device spec and the other reworking the exynos driver to fix coherence
issues on some android phones"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Driver version update to 07.734.00.00-rc1
scsi: megaraid_sas: Block zero-length ATA VPD inquiry
scsi: scsi_transport_srp: Replace min/max nesting with clamp()
scsi: ufs: core: Add device level exception support
scsi: ufs: core: Rename ufshcd_wb_presrv_usrspc_keep_vcc_on()
scsi: smartpqi: Use is_kdump_kernel() to check for kdump
scsi: pm80xx: Set phy_attached to zero when device is gone
scsi: ufs: exynos: gs101: Put UFS device in reset on .suspend()
scsi: ufs: exynos: Move phy calls to .exit() callback
scsi: ufs: exynos: Enable PRDT pre-fetching with UFSHCD_CAP_CRYPTO
scsi: ufs: exynos: Ensure consistent phy reference counts
scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set
scsi: ufs: exynos: Move UFS shareability value to drvdata
scsi: ufs: exynos: Ensure pre_link() executes before exynos_ufs_phy_init()
scsi: iscsi: Fix missing scsi_host_put() in error path
scsi: ufs: core: Fix a race condition related to device commands
scsi: hisi_sas: Fix I/O errors caused by hardware port ID changes
scsi: hisi_sas: Enable force phy when SATA disk directly connected
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Fix how sense data from the sense data for successfull NCQ commands
log page is used to fully initialize the result_tf of a completed
command, so that the sense data returned to the scsi layer is fully
initialized with all the device provided information (from Niklas)
* tag 'ata-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-sata: Save all fields from sense data descriptor
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate content for 6.15 (4/15/25) from Mario Limonciello:
"Add a fix for X3D processors where depending upon what BIOS was
set initially rankings might be set improperly.
Add a fix for changing min/max limits while on the performance
governor."
* tag 'amd-pstate-v6.15-2025-04-15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Enable ITMT support after initializing core rankings
cpufreq/amd-pstate: Fix min_limit perf and freq updation for performance governor
|
|
Since cpufreq_driver_resolve_freq() can run in parallel with
cpufreq_set_policy() and there is no synchronization between them,
the former may access policy->min and policy->max while the latter
is updating them and it may see intermediate values of them due
to the way the update is carried out. Also the compiler is free
to apply any optimizations it wants both to the stores in
cpufreq_set_policy() and to the loads in cpufreq_driver_resolve_freq()
which may result in additional inconsistencies.
To address this, use WRITE_ONCE() when updating policy->min and
policy->max in cpufreq_set_policy() and use READ_ONCE() for reading
them in cpufreq_driver_resolve_freq(). Moreover, rearrange the update
in cpufreq_set_policy() to avoid storing intermediate values in
policy->min and policy->max with the help of the observation that
their new values are expected to be properly ordered upfront.
Also modify cpufreq_driver_resolve_freq() to take the possible reverse
ordering of policy->min and policy->max, which may happen depending on
the ordering of operations when this function and cpufreq_set_policy()
run concurrently, into account by always honoring the max when it
turns out to be less than the min (in case it comes from thermal
throttling or similar).
Fixes: 151717690694 ("cpufreq: Make policy min/max hard requirements")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/5907080.DvuYhMxLoT@rjwysocki.net
|
|
The QDMA packet scheduler suffers from a performance issue.
Fix this by picking up changes from MediaTek's SDK which change to use
Token Bucket instead of Leaky Bucket and fix the SPEED_1000 configuration.
Fixes: 160d3a9b1929 ("net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/18040f60f9e2f5855036b75b28c4332a2d2ebdd8.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
100Mbps
Without this patch, the maximum weight of the queue limit will be
incorrect when linked at 100Mbps due to an apparent typo.
Fixes: f63959c7eec31 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/74111ba0bdb13743313999ed467ce564e8189006.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the current method, the MDC divider was reset to the default setting
of 2.5MHz after the NETSYS SER. Therefore, we need to reapply the MDC
divider configuration function in mtk_hw_init() after reset.
Fixes: c0a440031d431 ("net: ethernet: mtk_eth_soc: set MDIO bus clock frequency")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/8ab7381447e6cdcb317d5b5a6ddd90a1734efcb0.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit <5518f239aff1> ("iommu/vt-d: Move scalable mode ATS enablement to
probe path") changed the PCI ATS enablement logic to run earlier,
specifically before the default domain attachment.
On some client platforms, this change resulted in boot failures, causing
the kernel to panic with the following message and call trace:
Kernel panic - not syncing: DMAR hardware is malfunctioning
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc3+ #175
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
dump_stack+0x10/0x16
panic+0x10a/0x2b7
iommu_enable_translation.cold+0xc/0xc
intel_iommu_init+0xe39/0xec0
? trace_hardirqs_on+0x1e/0xd0
? __pfx_pci_iommu_init+0x10/0x10
pci_iommu_init+0xd/0x40
do_one_initcall+0x5b/0x390
kernel_init_freeable+0x26d/0x2b0
? __pfx_kernel_init+0x10/0x10
kernel_init+0x15/0x120
ret_from_fork+0x35/0x60
? __pfx_kernel_init+0x10/0x10
ret_from_fork_asm+0x1a/0x30
RIP: 1f0f:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0000:0000000000000000 EFLAGS: 841f0f2e66 ORIG_RAX:
1f0f2e6600000000
RAX: 0000000000000000 RBX: 1f0f2e6600000000 RCX:
2e66000000000084
RDX: 0000000000841f0f RSI: 000000841f0f2e66 RDI:
00841f0f2e660000
RBP: 00841f0f2e660000 R08: 00841f0f2e660000 R09:
000000841f0f2e66
R10: 0000000000841f0f R11: 2e66000000000084 R12:
000000841f0f2e66
R13: 0000000000841f0f R14: 2e66000000000084 R15:
1f0f2e6600000000
</TASK>
---[ end Kernel panic - not syncing: DMAR hardware is malfunctioning ]---
Fix this by reverting the timing change for ATS enablement introduced by
the offending commit and restoring the previous behavior.
Fixes: 5518f239aff1 ("iommu/vt-d: Move scalable mode ATS enablement to probe path")
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Closes: https://lore.kernel.org/linux-iommu/01b9c72f-460d-4f77-b696-54c6825babc9@linux.intel.com/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250416073608.1799578-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There is a string parsing logic error which can lead to an overflow of hid
or uid buffers. Comparing ACPIID_LEN against a total string length doesn't
take into account the lengths of individual hid and uid buffers so the
check is insufficient in some cases. For example if the length of hid
string is 4 and the length of the uid string is 260, the length of str
will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer
which size is 256.
The same applies to the hid string with length 13 and uid string with
length 250.
Check the length of hid and uid strings separately to prevent
buffer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: ca3bf5d47cec ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Paklov <Pavel.Paklov@cyberprotect.ru>
Link: https://lore.kernel.org/r/20250325092259.392844-1-Pavel.Paklov@cyberprotect.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.15
- fix scan failure for non-ANA multipath controllers (Hannes Reinecke)
- fix multipath sysfs links creation for some cases (Hannes Reinecke)
- PCIe endpoint fixes (Damien Le Moal)
- use NULL instead of 0 in the auth code (Damien Le Moal)"
* tag 'nvme-6.15-2025-04-17' of git://git.infradead.org/nvme:
nvmet: pci-epf: cleanup link state management
nvmet: pci-epf: clear CC and CSTS when disabling the controller
nvmet: pci-epf: always fully initialize completion entries
nvmet: auth: use NULL to clear a pointer in nvmet_auth_sq_free()
nvme-multipath: sysfs links may not be created for devices
nvme: fixup scan failure for non-ANA multipath controllers
|
|
We've never supported StreamID aliasing between devices, and as such
they will never have had functioning DMA, but this is not fatal to the
SMMU itself. Although aliasing between hard-wired platform device
StreamIDs would tend to raise questions about the whole system, in
practice it's far more likely to occur relatively innocently due to
legacy PCI bridges, where the underlying StreamID mappings are still
perfectly reasonable.
As such, return a more benign -ENODEV when failing probe for such an
unsupported device (and log a more obvious error message), so that it
doesn't break the entire SMMU probe now that bus_iommu_probe() runs in
the right order and can propagate that error back. The end result is
still that the device doesn't get an IOMMU group and probably won't
work, same as before.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/39d54e49c8476efc4653e352150d44b185d6d50f.1744380554.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ASPEED VGA card has two built-in devices:
0008:06:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 06)
0008:07:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 52)
Its toplogy looks like this:
+-[0008:00]---00.0-[01-09]--+-00.0-[02-09]--+-00.0-[03]----00.0 Sandisk Corp Device 5017
| +-01.0-[04]--
| +-02.0-[05]----00.0 NVIDIA Corporation Device
| +-03.0-[06-07]----00.0-[07]----00.0 ASPEED Technology, Inc. ASPEED Graphics Family
| +-04.0-[08]----00.0 Renesas Technology Corp. uPD720201 USB 3.0 Host Controller
| \-05.0-[09]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
\-00.1 PMC-Sierra Inc. Device 4028
The IORT logic populaties two identical IDs into the fwspec->ids array via
DMA aliasing in iort_pci_iommu_init() called by pci_for_each_dma_alias().
Though the SMMU driver had been able to handle this situation since commit
563b5cbe334e ("iommu/arm-smmu-v3: Cope with duplicated Stream IDs"), that
got broken by the later commit cdf315f907d4 ("iommu/arm-smmu-v3: Maintain
a SID->device structure"), which ended up with allocating separate streams
with the same stuffing.
On a kernel prior to v6.15-rc1, there has been an overlooked warning:
pci 0008:07:00.0: vgaarb: setting as boot VGA device
pci 0008:07:00.0: vgaarb: bridge control possible
pci 0008:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pcieport 0008:06:00.0: Adding to iommu group 14
ast 0008:07:00.0: stream 67328 already in tree <===== WARNING
ast 0008:07:00.0: enabling device (0002 -> 0003)
ast 0008:07:00.0: Using default configuration
ast 0008:07:00.0: AST 2600 detected
ast 0008:07:00.0: [drm] Using analog VGA
ast 0008:07:00.0: [drm] dram MCLK=396 Mhz type=1 bus_width=16
[drm] Initialized ast 0.1.0 for 0008:07:00.0 on minor 0
ast 0008:07:00.0: [drm] fb0: astdrmfb frame buffer device
With v6.15-rc, since the commit bcb81ac6ae3c ("iommu: Get DT/ACPI parsing
into the proper probe path"), the error returned with the warning is moved
to the SMMU device probe flow:
arm_smmu_probe_device+0x15c/0x4c0
__iommu_probe_device+0x150/0x4f8
probe_iommu_group+0x44/0x80
bus_for_each_dev+0x7c/0x100
bus_iommu_probe+0x48/0x1a8
iommu_device_register+0xb8/0x178
arm_smmu_device_probe+0x1350/0x1db0
which then fails the entire SMMU driver probe:
pci 0008:06:00.0: Adding to iommu group 21
pci 0008:07:00.0: stream 67328 already in tree
arm-smmu-v3 arm-smmu-v3.9.auto: Failed to register iommu
arm-smmu-v3 arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22
Since SMMU driver had been already expecting a potential duplicated Stream
ID in arm_smmu_install_ste_for_dev(), change the arm_smmu_insert_master()
routine to ignore a duplicated ID from the fwspec->sids array as well.
Note: this has been failing the iommu_device_probe() since 2021, although a
recent iommu commit in v6.15-rc1 that moves iommu_device_probe() started to
fail the SMMU driver probe. Since nobody has cared about DMA Alias support,
leave that as it was but fix the fundamental iommu_device_probe() breakage.
Fixes: cdf315f907d4 ("iommu/arm-smmu-v3: Maintain a SID->device structure")
Cc: stable@vger.kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20250415185620.504299-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
UBSan caught a bug with IOMMU SVA domains, where the reported exponent
value in __arm_smmu_tlb_inv_range() was >= 64.
__arm_smmu_tlb_inv_range() uses the domain's pgsize_bitmap to compute
the number of pages to invalidate and the invalidation range. Currently
arm_smmu_sva_domain_alloc() does not setup the iommu domain's
pgsize_bitmap. This leads to __ffs() on the value returning 64 and that
leads to undefined behaviour w.r.t. shift operations
Fix this by initializing the iommu_domain's pgsize_bitmap to PAGE_SIZE.
Effectively the code needs to use the smallest page size for
invalidation
Cc: stable@vger.kernel.org
Fixes: eb6c97647be2 ("iommu/arm-smmu-v3: Avoid constructing invalid range commands")
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250412002354.3071449-1-balbirs@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
