summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-10-09rtlwifi: btcoex: Remove set but not used variables 'wifi_busy','bt_info_ext'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c: In function btc8723b1ant_tdma_dur_adj_for_acl: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c:1428:7: warning: variable wifi_busy set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c: In function btc8723b1ant_tdma_dur_adj_for_acl: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c:1427:22: warning: variable bt_info_ext set but not used [-Wunused-but-set-variable] 'wifi_busy' is not used since commit 158707f9584c ("rtlwifi: btcoex: Restore 23b 1ant routine for tdma adjustment") 'bt_info_ext' is not used since commit 2622d7d86a57 ("rtlwifi: btcoex: 23b 1ant: TDMA duration for ACL busy") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-09rtlwifi: btcoex: Remove set but not used variable 'result'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8192e2ant.c: In function btc8192e2ant_tdma_duration_adjust: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8192e2ant.c:1584:6: warning: variable result set but not used [-Wunused-but-set-variable] It is not used since commit 27a31a60a4de ("rtlwifi: btcoex: remove unused functions") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-09rtlwifi: rtl8188ee: Remove set but not used variable 'h2c_parameter'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/dm.c: In function rtl88e_dm_pwdb_monitor: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/dm.c:763:6: warning: variable h2c_parameter set but not used [-Wunused-but-set-variable] It is not used since commit f1d2b4d338bf ("rtlwifi: rtl818x: Move drivers into new realtek directory") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-09rtlwifi: rtl8188ee: Remove set but not used variables ↵zhengbin
'v3','rtstatus','reg_ecc','reg_ec4','reg_eac','b_pathb_ok' Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function phy_config_bb_with_pghdr: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:652:22: warning: variable v3 set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function rtl88e_phy_config_rf_with_headerfile: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:772:7: warning: variable rtstatus set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function rtl88e_phy_iq_calibrate: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:1945:6: warning: variable reg_ecc set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function rtl88e_phy_iq_calibrate: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:1944:61: warning: variable reg_ec4 set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function rtl88e_phy_iq_calibrate: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:1944:34: warning: variable reg_eac set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function rtl88e_phy_iq_calibrate: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:1943:19: warning: variable b_pathb_ok set but not used [-Wunused-but-set-variable] They are not used since commit f1d2b4d338bf ("rtlwifi: rtl818x: Move drivers into new realtek directory") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-09rtlwifi: rtl8192c: Remove set but not used variables 'reg_ecc','reg_eac'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c: In function rtl92c_phy_iq_calibrate: drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c:1373:6: warning: variable reg_ecc set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c: In function rtl92c_phy_iq_calibrate: drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c:1372:34: warning: variable reg_eac set but not used [-Wunused-but-set-variable] They are not used since commit f1d2b4d338bf ("rtlwifi: rtl818x: Move drivers into new realtek directory") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-09rtlwifi: rtl8723ae: Remove set but not used variables ↵zhengbin
'reg_ecc','reg_ec4','reg_eac','b_pathb_ok' Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c: In function rtl8723e_phy_iq_calibrate: drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:1346:6: warning: variable reg_ecc set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c: In function rtl8723e_phy_iq_calibrate: drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:1345:61: warning: variable reg_ec4 set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c: In function rtl8723e_phy_iq_calibrate: drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:1345:34: warning: variable reg_eac set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c: In function rtl8723e_phy_iq_calibrate: drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:1344:19: warning: variable b_pathb_ok set but not used [-Wunused-but-set-variable] They are not used since commit f1d2b4d338bf ("rtlwifi: rtl818x: Move drivers into new realtek directory") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-09rtlwifi: rtl8821ae: Remove set but not used variables 'rtstatus','bd'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function rtl8812ae_phy_config_rf_with_headerfile: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:2079:7: warning: variable rtstatus set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function rtl8821ae_phy_config_rf_with_headerfile: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:2114:7: warning: variable rtstatus set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function _rtl8812ae_phy_get_txpower_limit: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:2354:6: warning: variable bd set but not used [-Wunused-but-set-variable] They are not used since commit f1d2b4d338bf ("rtlwifi: rtl818x: Move drivers into new realtek directory") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-09rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driverChris Chiu
We have 3 laptops which connect the wifi by the same RTL8723BU. The PCI VID/PID of the wifi chip is 10EC:B720 which is supported. They have the same problem with the in-kernel rtl8xxxu driver, the iperf (as a client to an ethernet-connected server) gets ~1Mbps. Nevertheless, the signal strength is reported as around -40dBm, which is quite good. From the wireshark capture, the tx rate for each data and qos data packet is only 1Mbps. Compare to the Realtek driver at https://github.com/lwfinger/rtl8723bu, the same iperf test gets ~12Mbps or better. The signal strength is reported similarly around -40dBm. That's why we want to improve. After reading the source code of the rtl8xxxu driver and Realtek's, the major difference is that Realtek's driver has a watchdog which will keep monitoring the signal quality and updating the rate mask just like the rtl8xxxu_gen2_update_rate_mask() does if signal quality changes. And this kind of watchdog also exists in rtlwifi driver of some specific chips, ex rtl8192ee, rtl8188ee, rtl8723ae, rtl8821ae...etc. They have the same member function named dm_watchdog and will invoke the corresponding dm_refresh_rate_adaptive_mask to adjust the tx rate mask. With this commit, the tx rate of each data and qos data packet will be 39Mbps (MCS4) with the 0xF00000 as the tx rate mask. The 20th bit to 23th bit means MCS4 to MCS7. It means that the firmware still picks the lowest rate from the rate mask and explains why the tx rate of data and qos data is always lowest 1Mbps because the default rate mask passed is always 0xFFFFFFF ranges from the basic CCK rate, OFDM rate, and MCS rate. However, with Realtek's driver, the tx rate observed from wireshark under the same condition is almost 65Mbps or 72Mbps, which indicating that rtl8xxxu could still be further improved. Signed-off-by: Chris Chiu <chiu@endlessm.com> Reviewed-by: Daniel Drake <drake@endlessm.com> Acked-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-09pinctrl: armada-37xx: swap polarity on LED groupPatrick Williams
The configuration registers for the LED group have inverted polarity, which puts the GPIO into open-drain state when used in GPIO mode. Switch to '0' for GPIO and '1' for LED modes. Fixes: 87466ccd9401 ("pinctrl: armada-37xx: Add pin controller support for Armada 37xx") Signed-off-by: Patrick Williams <alpawi@amazon.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191001155154.99710-1-alpawi@amazon.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-08Revert "tun: call dev_get_valid_name() before register_netdevice()"Eric Dumazet
This reverts commit 0ad646c81b2182f7fa67ec0c8c825e0ee165696d. As noticed by Jakub, this is no longer needed after commit 11fc7d5a0a2d ("tun: fix memory leak in error path") This no longer exports dev_get_valid_name() for the exclusive use of tun driver. Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08Merge tag 'mac80211-for-davem-2019-10-08' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A number of fixes: * allow scanning when operating on radar channels in ETSI regdomains * accept deauth frames in IBSS - we have code to parse and handle them, but were dropping them early * fix an allocation failure path in hwsim * fix a failure path memory leak in nl80211 FTM code * fix RCU handling & locking in multi-BSSID parsing * reject malformed SSID in mac80211 (this shouldn't really be able to happen, but defense in depth) * avoid userspace buffer overrun in ancient wext code if SSID was too long ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08net: hns3: support tx-scatter-gather-fraglist featureYunsheng Lin
The hardware supports up to 8 TX BD for non-tso skb and up to 63 TX BD for TSO skb. Currently, the hns3 driver supports RX skb with fraglist when HW GRO is enabled, when the stack forwards a RX skb with fraglist, the stack need to linearize the skb before sending to other interface without TX fraglist support. This patch adds support for TX fraglist. The performance increases from 1 GByte to 1.5 GByte for one iperf TCP stream during forwarding test after this patch. BTW, the minimum BD number of ring should be updated to 72 for supporting TX fraglist. This patch also changes the error handling of some function that called by hns3_fill_desc, which returns BD num when there is no error, change some macro to more meaningful name. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08net: hns3: add support for configuring VF MAC from the hostHuazhong Tan
This patch adds support of configuring VF MAC from the host for the HNS3 driver. BTW, the parameter init in the hns3_init_mac_addr is unnecessary now, since the MAC address will not read from NCL_CONFIG when doing reset, so it should be removed, otherwise it will affect VF's MAC address initialization. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08net: hns3: add support for configuring bandwidth of VF on the hostYonglong Liu
This patch adds support for configuring bandwidth of VF on the host for HNS3 drivers. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08net: hns3: add support for setting VF trustJian Shen
This patch adds supports for setting VF trust by host. If specified VF is trusted, then it can enable promisc(include allmulti mode). If a trusted VF enabled promisc, and being untrusted, host will disable promisc mode for this VF. For VF will update its promisc mode from set_rx_mode now, so it's unnecessary to set broadcst promisc mode when initialization or reset. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08net: hns3: add support for spoof check settingJian Shen
This patch adds support for spoof check configuration for VFs. When it is enabled, "spoof checking" is done for both mac address and VLAN. For each VF, the HW ensures that the source MAC address (or VLAN) of every outgoing packet exists in the MAC-list (or VLAN-list) configured for RX filtering for that VF. If not, the packet is dropped. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08net: hns3: add support for setting VF link status on the hostYufeng Mo
This patch adds support to configure VF link properties. The options are auto, enable, and disable. Even if the PF is down, the communication between VFs will be normal if the VFs are set to enable. The commands are as follows: 'ip link set <pf> vf <vf_id> state <auto|enable|disable>' change the VF status 'ip link show' show the setting status Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08NFC: pn533: fix use-after-free and memleaksJohan Hovold
The driver would fail to deregister and its class device and free related resources on late probe errors. Reported-by: syzbot+cb035c75c03dbe34b796@syzkaller.appspotmail.com Fixes: 32ecc75ded72 ("NFC: pn533: change order operations in dev registation") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08Input: soc_button_array - partial revert of support for newer surface devicesHans de Goede
Commit c394159310d0 ("Input: soc_button_array - add support for newer surface devices") not only added support for the MSHW0040 ACPI HID, but for some reason it also makes changes to the error handling of the soc_button_lookup_gpio() call in soc_button_device_create(). Note ideally this seamingly unrelated change would have been made in a separate commit, with a message explaining the what and why of this change. I guess this change may have been added to deal with -EPROBE_DEFER errors, but in case of the existing support for PNP0C40 devices, treating -EPROBE_DEFER as any other error is deliberate, see the comment this commit adds for why. The actual returning of -EPROBE_DEFER to the caller of soc_button_probe() introduced by the new error checking causes a serious regression: On devices with so called virtual GPIOs soc_button_lookup_gpio() will always return -EPROBE_DEFER for these fake GPIOs, when this happens during the second call of soc_button_device_create() we already have successfully registered our first child. This causes the kernel to think we are making progress with probing things even though we unregister the child before again before we return the -EPROBE_DEFER. Since we are making progress the kernel will retry deferred-probes again immediately ending up stuck in a loop with the following showing in dmesg: [ 124.022697] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6537 [ 124.040764] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6538 [ 124.056967] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6539 [ 124.072143] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6540 [ 124.092373] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6541 [ 124.108065] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6542 [ 124.128483] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6543 [ 124.147141] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6544 [ 124.165070] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6545 [ 124.179775] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6546 [ 124.202726] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6547 <continues on and on and on> And 1 CPU core being stuck at 100% and udev hanging since it is waiting for the modprobe of soc_button_array to return. This patch reverts the soc_button_lookup_gpio() error handling changes, fixing this regression. Fixes: c394159310d0 ("Input: soc_button_array - add support for newer surface devices") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205031 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20191005105551.353273-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-08net/mlx5: DR, Allow insertion of duplicate rulesAlex Vesker
Duplicate rules were not allowed to be configured with SW steering. This restriction caused failures with the replace rule logic done by upper layers. This fix allows for multiple rules with the same match values, in such case the first inserted rules will match. Fixes: 41d07074154c ("net/mlx5: DR, Expose steering rule functionality") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08tun: fix memory leak in error pathEric Dumazet
syzbot reported a warning [1] that triggered after recent Jiri patch. This exposes a bug that we hit already in the past (see commit ff244c6b29b1 ("tun: handle register_netdevice() failures properly") for details) tun uses priv->destructor without an ndo_init() method. register_netdevice() can return an error, but will not call priv->destructor() in some cases. Jiri recent patch added one more. A long term fix would be to transfer the initialization of what we destroy in ->destructor() in the ndo_init() This looks a bit risky given the complexity of tun driver. A simpler fix is to detect after the failed register_netdevice() if the tun_free_netdev() function was called already. [1] ODEBUG: free active (active state 0) object type: timer_list hint: tun_flow_cleanup+0x0/0x280 drivers/net/tun.c:457 WARNING: CPU: 0 PID: 8653 at lib/debugobjects.c:481 debug_print_object+0x168/0x250 lib/debugobjects.c:481 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 8653 Comm: syz-executor976 Not tainted 5.4.0-rc1-next-20191004 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2dc/0x755 kernel/panic.c:220 __warn.cold+0x2f/0x3c kernel/panic.c:581 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1028 RIP: 0010:debug_print_object+0x168/0x250 lib/debugobjects.c:481 Code: dd 80 b9 e6 87 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 b5 00 00 00 48 8b 14 dd 80 b9 e6 87 48 c7 c7 e0 ae e6 87 e8 80 84 ff fd <0f> 0b 83 05 e3 ee 80 06 01 48 83 c4 20 5b 41 5c 41 5d 41 5e 5d c3 RSP: 0018:ffff888095997a28 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815cb526 RDI: ffffed1012b32f37 RBP: ffff888095997a68 R08: ffff8880a92ac580 R09: ffffed1015d04101 R10: ffffed1015d04100 R11: ffff8880ae820807 R12: 0000000000000001 R13: ffffffff88fb5340 R14: ffffffff81627110 R15: ffff8880aa41eab8 __debug_check_no_obj_freed lib/debugobjects.c:963 [inline] debug_check_no_obj_freed+0x2d4/0x43f lib/debugobjects.c:994 kfree+0xf8/0x2c0 mm/slab.c:3755 kvfree+0x61/0x70 mm/util.c:593 netdev_freemem net/core/dev.c:9384 [inline] free_netdev+0x39d/0x450 net/core/dev.c:9533 tun_set_iff drivers/net/tun.c:2871 [inline] __tun_chr_ioctl+0x317b/0x3f30 drivers/net/tun.c:3075 tun_chr_ioctl+0x2b/0x40 drivers/net/tun.c:3355 vfs_ioctl fs/ioctl.c:47 [inline] file_ioctl fs/ioctl.c:539 [inline] do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:726 ksys_ioctl+0xab/0xd0 fs/ioctl.c:743 __do_sys_ioctl fs/ioctl.c:750 [inline] __se_sys_ioctl fs/ioctl.c:748 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:748 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441439 Code: e8 9c ae 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff61c37438 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441439 RDX: 0000000020000400 RSI: 00000000400454ca RDI: 0000000000000004 RBP: 00007fff61c37470 R08: 0000000000000001 R09: 0000000100000000 R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffffff R13: 0000000000000005 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: ff92741270bf ("net: introduce name_node struct to be used in hashlist") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08netdevsim: fix spelling mistake "forbidded" -> "forbid"Colin Ian King
There is a spelling mistake in a NL_SET_ERR_MSG_MOD message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08net: phy: mscc: make arrays static, makes object smallerColin Ian King
Don't populate const arrays on the stack but instead make them static. Makes the object code smaller by 1058 bytes. Before: text data bss dec hex filename 29879 6144 0 36023 8cb7 drivers/net/phy/mscc.o After: text data bss dec hex filename 28437 6528 0 34965 8895 drivers/net/phy/mscc.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08nfp: bpf: make array exp_mask static, makes object smallerColin Ian King
Don't populate the array exp_mask on the stack but instead make it static. Makes the object code smaller by 224 bytes. Before: text data bss dec hex filename 77832 2290 0 80122 138fa ethernet/netronome/nfp/bpf/jit.o After: text data bss dec hex filename 77544 2354 0 79898 1381a ethernet/netronome/nfp/bpf/jit.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08dm clone: Make __hash_find staticYueHaibing
drivers/md/dm-clone-target.c:594:34: warning: symbol '__hash_find' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-10-08Merge tag 'gpio-v5.4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - don't clear FLAG_IS_OUT when emulating open drain/source in gpiolib - fix up the usage of nonexclusive GPIO descriptors from device trees - fix the incorrect IEC offset when toggling trigger edge in the Spreadtrum driver - use the correct unit for debounce settings in the MAX77620 driver * tag 'gpio-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: max77620: Use correct unit for debounce times gpio: eic: sprd: Fix the incorrect EIC offset when toggling gpio: fix getting nonexclusive gpiods from DT gpiolib: don't clear FLAG_IS_OUT when emulating open-drain/open-source
2019-10-08spi: Add a PTP system timestamp to the transfer structureVladimir Oltean
SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-08rt2x00: remove input-polldev.h headerDmitry Torokhov
The driver does not use input subsystem so we do not need this header, and it is being removed, so stop pulling it in. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-08efi/tpm: Fix sanity check of unsigned tbl_size being less than zeroColin Ian King
Currently the check for tbl_size being less than zero is always false because tbl_size is unsigned. Fix this by making it a signed int. Addresses-Coverity: ("Unsigned compared against 0") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-janitors@vger.kernel.org Cc: linux-efi@vger.kernel.org Fixes: e658c82be556 ("efi/tpm: Only set 'efi_tpm_final_log_size' after successful event log parsing") Link: https://lkml.kernel.org/r/20191008100153.8499-1-colin.king@canonical.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-08Merge branch 'for-joerg/arm-smmu/fixes' of ↵Joerg Roedel
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into iommu/fixes
2019-10-08drm/panel: tpo-td043mtea1: Fix SPI aliasLaurent Pinchart
The panel-tpo-td043mtea1 driver incorrectly includes the OF vendor prefix in its SPI alias. Fix it, and move the manual alias to an SPI module device table. Fixes: dc2e1e5b2799 ("drm/panel: Add driver for the Toppoly TD043MTEA1 panel") Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191007170801.27647-6-laurent.pinchart@ideasonboard.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
2019-10-08drm/panel: tpo-td028ttec1: Fix SPI aliasLaurent Pinchart
The panel-tpo-td028ttec1 driver incorrectly includes the OF vendor prefix in its SPI alias. Fix it. Fixes: 415b8dd08711 ("drm/panel: Add driver for the Toppoly TD028TTEC1 panel") Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191007170801.27647-5-laurent.pinchart@ideasonboard.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-by: Andreas Kemnade <andreas@kemnade.info>
2019-10-08drm/panel: sony-acx565akm: Fix SPI aliasLaurent Pinchart
The panel-sony-acx565akm driver incorrectly includes the OF vendor prefix in its SPI alias. Fix it, and move the manual alias to an SPI module device table. Fixes: 1c8fc3f0c5d2 ("drm/panel: Add driver for the Sony ACX565AKM panel") Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191007170801.27647-4-laurent.pinchart@ideasonboard.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-10-08drm/panel: nec-nl8048hl11: Fix SPI aliasLaurent Pinchart
The panel-nec-nl8048hl11 driver incorrectly includes the OF vendor prefix in its SPI alias. Fix it, and move the manual alias to an SPI module device table. Fixes: df439abe6501 ("drm/panel: Add driver for the NEC NL8048HL11 panel") Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191007170801.27647-3-laurent.pinchart@ideasonboard.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-10-08drm/panel: lg-lb035q02: Fix SPI aliasLaurent Pinchart
The panel-lg-lb035q02 driver incorrectly includes the OF vendor prefix in its SPI alias. Fix it, and move the manual alias to an SPI module device table. Fixes: f5b0c6542476 ("drm/panel: Add driver for the LG Philips LB035Q02 panel") Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191007170801.27647-2-laurent.pinchart@ideasonboard.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-10-07ptp: fix typo of "mechanism" in Kconfig help textAntonio Borneo
Fix typo s/mechansim/mechanism/ Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07drm/i915: Mark contents as dirty on a write faultChris Wilson
Since dropping the set-to-gtt-domain in commit a679f58d0510 ("drm/i915: Flush pages on acquisition"), we no longer mark the contents as dirty on a write fault. This has the issue of us then not marking the pages as dirty on releasing the buffer, which means the contents are not written out to the swap device (should we ever pick that buffer as a victim). Notably, this is visible in the dumb buffer interface used for cursors. Having updated the cursor contents via mmap, and swapped away, if the shrinker should evict the old cursor, upon next reuse, the cursor would be invisible. E.g. echo 80 > /proc/sys/kernel/sysrq ; echo f > /proc/sysrq-trigger Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111541 Fixes: a679f58d0510 ("drm/i915: Flush pages on acquisition") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190920121821.7223-1-chris@chris-wilson.co.uk (cherry picked from commit 5028851cdfdf78dc22eacbc44a0ab0b3f599ee4a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-07drm/i915: Prevent bonded requests from overtaking each other on preemptionChris Wilson
Force bonded requests to run on distinct engines so that they cannot be shuffled onto the same engine where timeslicing will reverse the order. A bonded request will often wait on a semaphore signaled by its master, creating an implicit dependency -- if we ignore that implicit dependency and allow the bonded request to run on the same engine and before its master, we will cause a GPU hang. [Whether it will hang the GPU is debatable, we should keep on timeslicing and each timeslice should be "accidentally" counted as forward progress, in which case it should run but at one-half to one-third speed.] We can prevent this inversion by restricting which engines we allow ourselves to jump to upon preemption, i.e. baking in the arrangement established at first execution. (We should also consider capturing the implicit dependency using i915_sched_add_dependency(), but first we need to think about the constraints that requires on the execution/retirement ordering.) Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing") References: ee1136908e9b ("drm/i915/execlists: Virtual engine bonding") Testcase: igt/gem_exec_balancer/bonded-slice Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-3-chris@chris-wilson.co.uk (cherry picked from commit e2144503bf3b22275dd33cef2880e1cb5fb200c5) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-07drm/i915: Bump skl+ max plane width to 5k for linear/x-tiledVille Syrjälä
The officially validated plane width limit is 4k on skl+, however we already had people using 5k displays before we started to enforce the limit. Also it seems Windows allows 5k resolutions as well (though not sure if they do it with one plane or two). According to hw folks 5k should work with the possible exception of the following features: - Ytile (already limited to 4k) - FP16 (already limited to 4k) - render compression (already limited to 4k) - KVMR sprite and cursor (don't care) - horizontal panning (need to verify this) - pipe and plane scaling (need to verify this) So apart from last two items on that list we are already fine. We should really verify what happens with those last two items but I don't have a 5k display on hand atm so it'll have to wait. In the meantime let's just bump the limit back up to 5k since several users have already been using it without apparent issues. At least we'll be no worse off than we were prior to lowering the limits. Cc: stable@vger.kernel.org Cc: Sean Paul <sean@poorly.run> Cc: José Roberto de Souza <jose.souza@intel.com> Tested-by: Leho Kraav <leho@kraav.com> Fixes: 372b9ffb5799 ("drm/i915: Fix skl+ max plane width") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111501 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190905135044.2001-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Sean Paul <sean@poorly.run> (cherry picked from commit bed34ef544f9ab37ab349c04cf4142282c4dcf5d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-07drm/i915: Verify the engine after acquiring the active.lockChris Wilson
When using virtual engines, the rq->engine is not stable until we hold the engine->active.lock (as the virtual engine may be exchanged with the sibling). Since commit 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy") we may retire a request concurrently with resubmitting it to HW, we need to be extra careful to verify we are holding the correct lock for the request's active list. This is similar to the issue we saw with rescheduling the virtual requests, see sched_lock_engine(). Or else: <4> [876.736126] list_add corruption. prev->next should be next (ffff8883f931a1f8), but was dead000000000100. (prev=ffff888361ffa610). <4> [876.736136] WARNING: CPU: 2 PID: 21 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70 <4> [876.736137] Modules linked in: i915(+) amdgpu gpu_sched ttm vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul snd_intel_nhlt snd_hda_codec snd_hwdep snd_hda_core ghash_clmulni_intel e1000e cdc_ether usbnet mii snd_pcm ptp pps_core mei_me mei prime_numbers btusb btrtl btbcm btintel bluetooth ecdh_generic ecc [last unloaded: i915] <4> [876.736154] CPU: 2 PID: 21 Comm: ksoftirqd/2 Tainted: G U 5.3.0-CI-CI_DRM_6898+ #1 <4> [876.736156] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019 <4> [876.736157] RIP: 0010:__list_add_valid+0x4d/0x70 <4> [876.736159] Code: c3 48 89 d1 48 c7 c7 20 33 0e 82 48 89 c2 e8 4a 4a bc ff 0f 0b 31 c0 c3 48 89 c1 4c 89 c6 48 c7 c7 70 33 0e 82 e8 33 4a bc ff <0f> 0b 31 c0 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 c0 33 0e 82 e8 <4> [876.736160] RSP: 0018:ffffc9000018bd30 EFLAGS: 00010082 <4> [876.736162] RAX: 0000000000000000 RBX: ffff888361ffc840 RCX: 0000000000000104 <4> [876.736163] RDX: 0000000080000104 RSI: 0000000000000000 RDI: 00000000ffffffff <4> [876.736164] RBP: ffffc9000018bd68 R08: 0000000000000000 R09: 0000000000000001 <4> [876.736165] R10: 00000000aed95de3 R11: 000000007fe927eb R12: ffff888361ffca10 <4> [876.736166] R13: ffff888361ffa610 R14: ffff888361ffc880 R15: ffff8883f931a1f8 <4> [876.736168] FS: 0000000000000000(0000) GS:ffff88849fd00000(0000) knlGS:0000000000000000 <4> [876.736169] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [876.736170] CR2: 00007f093a9173c0 CR3: 00000003bba08005 CR4: 0000000000760ee0 <4> [876.736171] PKRU: 55555554 <4> [876.736172] Call Trace: <4> [876.736226] __i915_request_submit+0x152/0x370 [i915] <4> [876.736263] __execlists_submission_tasklet+0x6da/0x1f50 [i915] <4> [876.736293] ? execlists_submission_tasklet+0x29/0x50 [i915] <4> [876.736321] execlists_submission_tasklet+0x34/0x50 [i915] <4> [876.736325] tasklet_action_common.isra.5+0x47/0xb0 <4> [876.736328] __do_softirq+0xd8/0x4ae <4> [876.736332] ? smpboot_thread_fn+0x23/0x280 <4> [876.736334] ? smpboot_thread_fn+0x6b/0x280 <4> [876.736336] run_ksoftirqd+0x2b/0x50 <4> [876.736338] smpboot_thread_fn+0x1d3/0x280 <4> [876.736341] ? sort_range+0x20/0x20 <4> [876.736343] kthread+0x119/0x130 <4> [876.736345] ? kthread_park+0xa0/0xa0 <4> [876.736347] ret_from_fork+0x24/0x50 <4> [876.736353] irq event stamp: 2290145 <4> [876.736356] hardirqs last enabled at (2290144): [<ffffffff8123cde8>] __slab_free+0x3e8/0x500 <4> [876.736358] hardirqs last disabled at (2290145): [<ffffffff819cfb4d>] _raw_spin_lock_irqsave+0xd/0x50 <4> [876.736360] softirqs last enabled at (2290114): [<ffffffff81c0033e>] __do_softirq+0x33e/0x4ae <4> [876.736361] softirqs last disabled at (2290119): [<ffffffff810b815b>] run_ksoftirqd+0x2b/0x50 <4> [876.736363] WARNING: CPU: 2 PID: 21 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70 <4> [876.736364] ---[ end trace 3e58d6c7356c65bf ]--- <4> [876.736406] ------------[ cut here ]------------ <4> [876.736415] list_del corruption. prev->next should be ffff888361ffca10, but was ffff88840ac2c730 <4> [876.736421] WARNING: CPU: 2 PID: 5490 at lib/list_debug.c:53 __list_del_entry_valid+0x79/0x90 <4> [876.736422] Modules linked in: i915(+) amdgpu gpu_sched ttm vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul snd_intel_nhlt snd_hda_codec snd_hwdep snd_hda_core ghash_clmulni_intel e1000e cdc_ether usbnet mii snd_pcm ptp pps_core mei_me mei prime_numbers btusb btrtl btbcm btintel bluetooth ecdh_generic ecc [last unloaded: i915] <4> [876.736433] CPU: 2 PID: 5490 Comm: i915_selftest Tainted: G U W 5.3.0-CI-CI_DRM_6898+ #1 <4> [876.736435] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019 <4> [876.736436] RIP: 0010:__list_del_entry_valid+0x79/0x90 <4> [876.736438] Code: 0b 31 c0 c3 48 89 fe 48 c7 c7 30 34 0e 82 e8 ae 49 bc ff 0f 0b 31 c0 c3 48 89 f2 48 89 fe 48 c7 c7 68 34 0e 82 e8 97 49 bc ff <0f> 0b 31 c0 c3 48 c7 c7 a8 34 0e 82 e8 86 49 bc ff 0f 0b 31 c0 c3 <4> [876.736439] RSP: 0018:ffffc900003ef758 EFLAGS: 00010086 <4> [876.736440] RAX: 0000000000000000 RBX: ffff888361ffc840 RCX: 0000000000000002 <4> [876.736442] RDX: 0000000080000002 RSI: 0000000000000000 RDI: 00000000ffffffff <4> [876.736443] RBP: ffffc900003ef780 R08: 0000000000000000 R09: 0000000000000001 <4> [876.736444] R10: 000000001418e4b7 R11: 000000007f0ea93b R12: ffff888361ffcab8 <4> [876.736445] R13: ffff88843b6d0000 R14: 000000000000217c R15: 0000000000000001 <4> [876.736447] FS: 00007f4e6f255240(0000) GS:ffff88849fd00000(0000) knlGS:0000000000000000 <4> [876.736448] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [876.736449] CR2: 00007f093a9173c0 CR3: 00000003bba08005 CR4: 0000000000760ee0 <4> [876.736450] PKRU: 55555554 <4> [876.736451] Call Trace: <4> [876.736488] i915_request_retire+0x224/0x8e0 [i915] <4> [876.736521] i915_request_create+0x4b/0x1b0 [i915] <4> [876.736550] nop_virtual_engine+0x230/0x4d0 [i915] Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111695 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190918145453.8800-1-chris@chris-wilson.co.uk (cherry picked from commit 37fa0de3c137d5f54f7e64f53495c9d501d42a4d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-07drm/i915: Extend Haswell GT1 PSMI workaround to allChris Wilson
A few times in CI, we have detected a GPU hang on our Haswell GT2 systems with the characteristic IPEHR of 0x780c0000. When the PSMI w/a was first introducted, it was applied to all Haswell, but later on we found an erratum that supposedly restricted the issue to GT1 and so constrained it only be applied on GT1. That may have been a mistake... Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111692 Fixes: 167bc759e823 ("drm/i915: Restrict PSMI context load w/a to Haswell GT1") References: 2c550183476d ("drm/i915: Disable PSMI sleep messages on all rings around context switches") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190917194746.26710-1-chris@chris-wilson.co.uk (cherry picked from commit 56c05de6bd773b96deca379370965c49042b5fbf) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-07drm/i915: Don't mix srcu tag and negative error codesChris Wilson
While srcu may use an integer tag, it does not exclude potential error codes and so may overlap with our own use of -EINTR. Use a separate outparam to store the tag, and report the error code separately. Fixes: 2caffbf11762 ("drm/i915: Revoke mmaps and prevent access to fence registers across reset") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190912160834.30601-1-chris@chris-wilson.co.uk (cherry picked from commit eebab60f224fcfd560957715d08c31564d8672ed) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-07drm/i915: Whitelist COMMON_SLICE_CHICKEN2Kenneth Graunke
This allows userspace to use "legacy" mode for push constants, where they are committed at 3DPRIMITIVE or flush time, rather than being committed at 3DSTATE_BINDING_TABLE_POINTERS_XS time. Gen6-8 and Gen11 both use the "legacy" behavior - only Gen9 works in the "new" way. Conflating push constants with binding tables is painful for userspace, we would like to be able to avoid doing so. Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190911014801.26821-1-kenneth@whitecape.org (cherry picked from commit 0606259e3b3a1220a0f04a92a1654a3f674f47ee) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-07drm/i915: Perform GGTT restore much earlier during resumeChris Wilson
As soon as we re-enable the various functions within the HW, they may go off and read data via a GGTT offset. Hence, if we have not yet restored the GGTT PTE before then, they may read and even *write* random locations in memory. Detected by DMAR faults during resume. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Martin Peres <martin.peres@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190909110011.8958-4-chris@chris-wilson.co.uk (cherry picked from commit cec5ca08e36fd18d2939b98055346b3b06f56c6c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-07drm/i915/execlists: Remove incorrect BUG_ON for schedule-outChris Wilson
As we may unwind incomplete requests (for preemption) prior to processing the CSB and the schedule-out events, we may update rq->engine (resetting it to point back to the parent virtual engine) prior to calling execlists_schedule_out(), invalidating the assertion that the request still points to the inflight engine. (The likelihood of this is increased if the CSB interrupt processing is pushed to the ksoftirqd for being too slow and direct submission overtakes it.) Tvrtko summarised it as: "So unwind from direct submission resets rq->engine and races with process_csb from the tasklet which notices request has actually completed." Reported-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Fixes: df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190907105046.19934-1-chris@chris-wilson.co.uk (cherry picked from commit d810583fc2fcf139cc766eb2303500b2d9cf064d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-07dpaa2-eth: Avoid unbounded while loopsIoana Radulescu
Throughout the driver there are several places where we wait indefinitely for DPIO portal commands to be executed, while the portal returns a busy response code. Even though in theory we are guaranteed the portals become available eventually, in practice the QBMan hardware module may become unresponsive in various corner cases. Make sure we can never get stuck in an infinite while loop by adding a retry counter for all portal commands. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07dpaa2-eth: Fix minor bug in ethtool stats reportingIoana Radulescu
Don't print error message for a successful return value. Fixes: d84c3a4ded96 ("dpaa2-eth: Add new DPNI statistics counters") Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07dpaa2-eth: Cleanup dead codeIoana Radulescu
Remove one function call whose result was not used anywhere. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07net: hns3: make array tick_array static, makes object smallerColin Ian King
Don't populate the array tick_array on the stack but instead make it static. Makes the object code smaller by 29 bytes. Before: text data bss dec hex filename 19191 432 0 19623 4ca7 hisilicon/hns3/hns3pf/hclge_tm.o After: text data bss dec hex filename 19098 496 0 19594 4c8a hisilicon/hns3/hns3pf/hclge_tm.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07net: hns: make arrays static, makes object smallerColin Ian King
Don't populate the arrays port_map and sl_map on the stack but instead make them static. Makes the object code smaller by 64 bytes. Before: text data bss dec hex filename 49575 6872 64 56511 dcbf hisilicon/hns/hns_dsaf_main.o After: text data bss dec hex filename 49350 7032 64 56446 dc7e hisilicon/hns/hns_dsaf_main.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 02:57:59 +0000