summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-10-05video/logo: do not generate unneeded logo C filesMasahiro Yamada
Currently, all the logo C files are generated irrespective of the CONFIG options. Adding them to extra-y is wrong. What we need to do here is to add them to 'targets' so that if_changed works properly. Files listed in 'targets' are cleaned, so clean-files is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-05video/logo: remove unneeded *.o pattern from clean-filesMasahiro Yamada
The pattern *.o is cleaned up globally by the top Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-04net: qlogic: Fix memory leak in ql_alloc_large_buffersNavid Emamdoost
In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb. This skb should be released if pci_dma_mapping_error fails. Fixes: 0f8ab89e825f ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: at803x: use operating parameters from PHY-specific statusRussell King
Read the PHY-specific status register for the current operating mode (speed and duplex) of the PHY. This register reflects the actual mode that the PHY has resolved depending on either the advertisements of autoneg is enabled, or the forced mode if autoneg is disabled. This ensures that phylib's software state always tracks the hardware state. It seems both AR8033 (which uses the AR8031 ID) and AR8035 support this status register. AR8030 is not known at the present time. This patch depends on "net: phy: extract pause mode" and "net: phy: extract link partner advertisement reading". Reported-by: tinywrkb <tinywrkb@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: tinywrkb <tinywrkb@gmail.com> Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: extract pause modeRussell King
Extract the update of phylib's software pause mode state from genphy_read_status(), so that we can re-use this functionality with PHYs that have alternative ways to read the negotiation results. Tested-by: tinywrkb <tinywrkb@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: extract link partner advertisement readingRussell King
Move reading the link partner advertisement out of genphy_read_status() into its own separate function. This will allow re-use of this code by PHY drivers that are able to read the resolved status from the PHY. Tested-by: tinywrkb <tinywrkb@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: fix write to mii-ctrl1000 registerRussell King
When userspace writes to the MII_ADVERTISE register, we update phylib's advertising mask and trigger a renegotiation. However, writing to the MII_CTRL1000 register, which contains the gigabit advertisement, does neither. This can lead to phylib's copy of the advertisement becoming de-synced with the values in the PHY register set, which can result in incorrect negotiation resolution. Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: allow for reset line to be tied to a sleepy GPIO controllerAndrea Merello
mdio_device_reset() makes use of the atomic-pretending API flavor for handling the PHY reset GPIO line. I found no hint that mdio_device_reset() is called from atomic context and indeed it uses usleep_range() since long time, so I would assume that it is OK to sleep there. This patch switch to gpiod_set_value_cansleep() in mdio_device_reset(). This is relevant if e.g. the PHY reset line is tied to a I2C GPIO controller. This has been tested on a ZynqMP board running an upstream 4.19 kernel and then hand-ported on current kernel tree. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04r8152: Set macpassthru in reset_resume callbackKai-Heng Feng
r8152 may fail to establish network connection after resume from system suspend. If the USB port connects to r8152 lost its power during system suspend, the MAC address was written before is lost. The reason is that The MAC address doesn't get written again in its reset_resume callback. So let's set MAC address again in reset_resume callback. Also remove unnecessary lock as no other locking attempt will happen during reset_resume. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: dsa: sja1105: Make function sja1105_xfer_long_buf staticzhengbin
Fix sparse warnings: drivers/net/dsa/sja1105/sja1105_spi.c:159:5: warning: symbol 'sja1105_xfer_long_buf' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04nvme: retain split access workaround for capability readsArd Biesheuvel
Commit 7fd8930f26be4 "nvme: add a common helper to read Identify Controller data" has re-introduced an issue that we have attempted to work around in the past, in commit a310acd7a7ea ("NVMe: use split lo_hi_{read,write}q"). The problem is that some PCIe NVMe controllers do not implement 64-bit outbound accesses correctly, which is why the commit above switched to using lo_hi_[read|write]q for all 64-bit BAR accesses occuring in the code. In the mean time, the NVMe subsystem has been refactored, and now calls into the PCIe support layer for NVMe via a .reg_read64() method, which fails to use lo_hi_readq(), and thus reintroduces the problem that the workaround above aimed to address. Given that, at the moment, .reg_read64() is only used to read the capability register [which is known to tolerate split reads], let's switch .reg_read64() to lo_hi_readq() as well. This fixes a boot issue on some ARM boxes with NVMe behind a Synopsys DesignWare PCIe host controller. Fixes: 7fd8930f26be4 ("nvme: add a common helper to read Identify Controller data") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-10-04nvme: fix possible deadlock when nvme_update_formats failsSagi Grimberg
nvme_update_formats may fail to revalidate the namespace and attempt to remove the namespace. This may lead to a deadlock as nvme_ns_remove will attempt to acquire the subsystem lock which is already acquired by the passthru command with effects. Move the invalid namepsace removal to after the passthru command releases the subsystem lock. Reported-by: Judy Brock <judy.brock@samsung.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-10-05pinctrl: ns2: Fix off by one bugs in ns2_pinmux_enable()Dan Carpenter
The pinctrl->functions[] array has pinctrl->num_functions elements and the pinctrl->groups[] array is the same way. These are set in ns2_pinmux_probe(). So the > comparisons should be >= so that we don't read one element beyond the end of the array. Fixes: b5aa1006e4a9 ("pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20190926081426.GB2332@mwanda Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-05pinctrl: bcm-iproc: Use SPDX headerLinus Walleij
This convert the BCM IPROC driver to use the SPDX header for indicating GPL v2.0 only licensing. Cc: Pramod Kumar <pramodku@broadcom.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Scott Branden <scott.branden@broadcom.com> Link: https://lore.kernel.org/r/20191002130217.4491-1-linus.walleij@linaro.org
2019-10-04gpio: max77620: Use correct unit for debounce timesThierry Reding
The gpiod_set_debounce() function takes the debounce time in microseconds. Adjust the switch/case values in the MAX77620 GPIO to use the correct unit. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191002122825.3948322-1-thierry.reding@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-04pinctrl: armada-37xx: fix control of pins 32 and upPatrick Williams
The 37xx configuration registers are only 32 bits long, so pins 32-35 spill over into the next register. The calculation for the register address was done, but the bitmask was not, so any configuration to pin 32 or above resulted in a bitmask that overflowed and performed no action. Fix the register / offset calculation to also adjust the offset. Fixes: 5715092a458c ("pinctrl: armada-37xx: Add gpio support") Signed-off-by: Patrick Williams <alpawi@amazon.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191001154634.96165-1-alpawi@amazon.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-04net: dsa: sja1105: Add support for port mirroringVladimir Oltean
Amazingly, of all features, this does not require a switch reset. Tested with: tc qdisc add dev swp2 clsact tc filter add dev swp2 ingress matchall skip_sw \ action mirred egress mirror dev swp3 tc filter show dev swp2 ingress tc filter del dev swp2 ingress pref 49152 Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04cxgb4:Fix out-of-bounds MSI-X info array accessVishal Kulkarni
When fetching free MSI-X vectors for ULDs, check for the error code before accessing MSI-X info array. Otherwise, an out-of-bounds access is attempted, which results in kernel panic. Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: broadcom: Use bcm54xx_config_clock_delay() for BCM54612EFlorian Fainelli
bcm54612e_config_init() duplicates what bcm54xx_config_clock_delay() does with respect to configuring RGMII TX/RX delays appropriately. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: broadcom: Fix RGMII delays configuration for BCM54210EFlorian Fainelli
Commit 0fc9ae107669 ("net: phy: broadcom: add support for BCM54210E") added support for BCM54210E but also unconditionally cleared the RXC to RXD skew and the TXD to TXC skew, thus only making PHY_INTERFACE_MODE_RGMII a possible configuration. Use bcm54xx_config_clock_delay() which correctly sets the registers depending on the 4 possible PHY interface values that exist for RGMII. Fixes: 0fc9ae107669 ("net: phy: broadcom: add support for BCM54210E") Reported-by: Manasa Mudireddy <manasa.mudireddy@broadcom.com> Reported-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: allow compiling TLS TOE outJakub Kicinski
TLS "record layer offload" requires TOE, and bypasses most of the normal networking stack. It is also significantly less maintained. Allow users to compile it out to avoid issues. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: rename tls_device to tls_toe_deviceJakub Kicinski
Rename struct tls_device to struct tls_toe_device to avoid confusion with normal, non-TOE offload. No functional changes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: move TOE-related structures to a separate headerJakub Kicinski
Move tls_device structure and register/unregister functions to a new header to avoid confusion with normal, non-TOE offload. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04qmi_wwan: add support for Cinterion CLS8 devicesReinhard Speyerer
Add support for Cinterion CLS8 devices. Use QMI_QUIRK_SET_DTR as required for Qualcomm MDM9x07 chipsets. T: Bus=01 Lev=03 Prnt=05 Port=01 Cnt=02 Dev#= 25 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b0 Rev= 3.18 S: Manufacturer=GEMALTO S: Product=USB Modem C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04RDMA/mlx5: Add missing synchronize_srcu() for MW casesJason Gunthorpe
While MR uses live as the SRCU 'update', the MW case uses the xarray directly, xa_erase() causes the MW to become inaccessible to the pagefault thread. Thus whenever a MW is removed from the xarray we must synchronize_srcu() before freeing it. This must be done before freeing the mkey as re-use of the mkey while the pagefault thread is using the stale mkey is undesirable. Add the missing synchronizes to MW and DEVX indirect mkey and delete the bogus protection against double destroy in mlx5_core_destroy_mkey() Fixes: 534fd7aac56a ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP") Fixes: 6aec21f6a832 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191001153821.23621-7-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/mlx5: Put live in the correct place for ODP MRsJason Gunthorpe
live is used to signal to the pagefault thread that the MR is initialized and ready for use. It should be after the umem is assigned and all other setup is completed. This prevents races (at least) of the form: CPU0 CPU1 mlx5_ib_alloc_implicit_mr() implicit_mr_alloc() live = 1 imr->umem = umem num_pending_prefetch_inc() if (live) atomic_inc(num_pending_prefetch) atomic_set(num_pending_prefetch,0) // Overwrites other thread's store Further, live is being used with SRCU as the 'update' in an acquire/release fashion, so it can not be read and written raw. Move all live = 1's to after MR initialization is completed and use smp_store_release/smp_load_acquire() for manipulating it. Add a missing live = 0 when an implicit MR child is deleted, before queuing work to do synchronize_srcu(). The barriers in update_odp_mr() were some broken attempt to create a acquire/release, but were not even applied consistently and missed the point, delete it as well. Fixes: 6aec21f6a832 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191001153821.23621-6-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/mlx5: Order num_pending_prefetch properly with synchronize_srcuJason Gunthorpe
During destroy setting live = 0 and then synchronize_srcu() prevents num_pending_prefetch from incrementing, and also, ensures that all work holding that count is queued on the WQ. Testing before causes races of the form: CPU0 CPU1 dereg_mr() mlx5_ib_advise_mr_prefetch() srcu_read_lock() num_pending_prefetch_inc() if (!live) live = 0 atomic_read() == 0 // skip flush_workqueue() atomic_inc() queue_work(); srcu_read_unlock() WARN_ON(atomic_read()) // Fails Swap the order so that the synchronize_srcu() prevents this. Fixes: a6bc3875f176 ("IB/mlx5: Protect against prefetch of invalid MR") Link: https://lore.kernel.org/r/20191001153821.23621-5-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/odp: Lift umem_mutex out of ib_umem_odp_unmap_dma_pages()Jason Gunthorpe
This fixes a race of the form: CPU0 CPU1 mlx5_ib_invalidate_range() mlx5_ib_invalidate_range() // This one actually makes npages == 0 ib_umem_odp_unmap_dma_pages() if (npages == 0 && !dying) // This one does nothing ib_umem_odp_unmap_dma_pages() if (npages == 0 && !dying) dying = 1; dying = 1; schedule_work(&umem_odp->work); // Double schedule of the same work schedule_work(&umem_odp->work); // BOOM npages and dying must be read and written under the umem_mutex lock. Since whenever ib_umem_odp_unmap_dma_pages() is called mlx5 must also call mlx5_ib_update_xlt, and both need to be done in the same locking region, hoist the lock out of unmap. This avoids an expensive double critical section in mlx5_ib_invalidate_range(). Fixes: 81713d3788d2 ("IB/mlx5: Add implicit MR support") Link: https://lore.kernel.org/r/20191001153821.23621-4-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/mlx5: Fix a race with mlx5_ib_update_xlt on an implicit MRJason Gunthorpe
mlx5_ib_update_xlt() must be protected against parallel free of the MR it is accessing, also it must be called single threaded while updating the HW. Otherwise we can have races of the form: CPU0 CPU1 mlx5_ib_update_xlt() mlx5_odp_populate_klm() odp_lookup() == NULL pklm = ZAP implicit_mr_get_data() implicit_mr_alloc() <update interval tree> mlx5_ib_update_xlt mlx5_odp_populate_klm() odp_lookup() != NULL pklm = VALID mlx5_ib_post_send_wait() mlx5_ib_post_send_wait() // Replaces VALID with ZAP This can be solved by putting both the SRCU and the umem_mutex lock around every call to mlx5_ib_update_xlt(). This ensures that the content of the interval tree relavent to mlx5_odp_populate_klm() (ie mr->parent == mr) will not change while it is running, and thus the posted WRs to update the KLM will always reflect the correct information. The race above will resolve by either having CPU1 wait till CPU0 completes the ZAP or CPU0 will run after the add and instead store VALID. The pagefault path adding children already holds the umem_mutex and SRCU, so the only missed lock is during MR destruction. Fixes: 81713d3788d2 ("IB/mlx5: Add implicit MR support") Link: https://lore.kernel.org/r/20191001153821.23621-3-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/mlx5: Do not allow rereg of a ODP MRJason Gunthorpe
This code is completely broken, the umem of a ODP MR simply cannot be discarded without a lot more locking, nor can an ODP mkey be blithely destroyed via destroy_mkey(). Fixes: 6aec21f6a832 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191001153821.23621-2-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04IB/core: Fix wrong iterating on portsMohamad Heib
rdma_for_each_port is already incrementing the iterator's value it receives therefore, after the first iteration the iterator is increased by 2 which eventually causing wrong queries and possible traces. Fix the above by removing the old redundant incrementation that was used before rdma_for_each_port() macro. Cc: <stable@vger.kernel.org> Fixes: ea1075edcbab ("RDMA: Add and use rdma_for_each_port") Link: https://lore.kernel.org/r/20191002122127.17571-1-leon@kernel.org Signed-off-by: Mohamad Heib <mohamadh@mellanox.com> Reviewed-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/nldev: Reshuffle the code to avoid need to rebind QP in error pathLeon Romanovsky
Properly unwind QP counter rebinding in case of failure. Trying to rebind the counter after unbiding it is not going to work reliably, move the unbind to the end so it doesn't have to be unwound. Fixes: b389327df905 ("RDMA/nldev: Allow counter manual mode configration through RDMA netlink") Link: https://lore.kernel.org/r/20191002115627.16740-1-leon@kernel.org Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/cxgb4: Do not dma memory off of the stackGreg KH
Nicolas pointed out that the cxgb4 driver is doing dma off of the stack, which is generally considered a very bad thing. On some architectures it could be a security problem, but odds are none of them actually run this driver, so it's just a "normal" bug. Resolve this by allocating the memory for a message off of the heap instead of the stack. kmalloc() always will give us a proper memory location that DMA will work correctly from. Link: https://lore.kernel.org/r/20191001165611.GA3542072@kroah.com Reported-by: Nicolas Waisman <nico@semmle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04Merge tag 'for-linus-5.4-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes and cleanups from Juergen Gross: - a fix in the Xen balloon driver avoiding hitting a BUG_ON() in some cases, plus a follow-on cleanup series for that driver - a patch for introducing non-blocking EFI callbacks in Xen's EFI driver, plu a cleanup patch for Xen EFI handling merging the x86 and ARM arch specific initialization into the Xen EFI driver - a fix of the Xen xenbus driver avoiding a self-deadlock when cleaning up after a user process has died - a fix for Xen on ARM after removal of ZONE_DMA - a cleanup patch for avoiding build warnings for Xen on ARM * tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: fix self-deadlock after killing user process xen/efi: have a common runtime setup function arm: xen: mm: use __GPF_DMA32 for arm64 xen/balloon: Clear PG_offline in balloon_retrieve() xen/balloon: Mark pages PG_offline in balloon_append() xen/balloon: Drop __balloon_append() xen/balloon: Set pages PageOffline() in balloon_add_region() ARM: xen: unexport HYPERVISOR_platform_op function xen/efi: Set nonblocking callbacks
2019-10-04net: devlink: allow to change namespaces during reloadJiri Pirko
All devlink instances are created in init_net and stay there for a lifetime. Allow user to be able to move devlink instances into namespaces during devlink reload operation. That ensures proper re-instantiation of driver objects, including netdevices. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: take devlink net instead of init_netJiri Pirko
Follow-up patch is going to allow to reload devlink instance into different network namespace, so use devlink_net() helper instead of init_net. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: register port netdevices into net of deviceJiri Pirko
Register newly created port netdevice into net namespace that the parent device belongs to. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: implement proper devlink reloadJiri Pirko
During devlink reload, all driver objects should be reinstantiated with the exception of devlink instance and devlink resources and params. Move existing devlink_resource_size_get() calls into fib_create() just before fib notifier is registered. Also, make sure that extack is propagated down to fib_notifier_register() call. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: add all ports in nsim_dev_create() and del them in destroy()Jiri Pirko
Currently the probe/remove function does this separately. Put the addition an deletion of ports into nsim_dev_create() and nsim_dev_destroy(). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: Propagate extack down to register_fib_notifier()Jiri Pirko
During the devlink reaload the extack is present, so propagate it all the way down to register_fib_notifier() call in spectrum_router.c. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: Register port netdevices into net of coreJiri Pirko
When creating netdevices for ports, put them under network namespace that the core/parent devlink belongs to. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: spectrum: Take devlink net instead of init_netJiri Pirko
Follow-up patch is going to allow to reload devlink instance into different network namespace, so use devlink_net() helper instead of init_net. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: fib_notifier: propagate extack down to the notifier block callbackJiri Pirko
Since errors are propagated all the way up to the caller, propagate possible extack of the caller all the way down to the notifier block callback. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: spectrum_router: Don't rely on missing extack to symbolize dumpJiri Pirko
Currently if info->extack is NULL, mlxsw assumes that the event came down from dump. Originally, the dump did not propagate the return value back to the original caller (fib_notifier_register()). However, that is now happening. So benefit from this and push the error up if it happened. Remove rule cases in work handlers that are now dead code. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: fib_notifier: make FIB notifier per-netnsJiri Pirko
Currently all users of FIB notifier only cares about events in init_net. Later in this patchset, users get interested in other namespaces too. However, for every registered block user is interested only about one namespace. Make the FIB notifier registration per-netns and avoid unnecessary calls of notifier block for other namespaces. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: change fib accounting and limitations to be per-deviceJiri Pirko
Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04RDMA/cm: Fix memory leak in cm_add/remove_oneJack Morgenstein
In the process of moving the debug counters sysfs entries, the commit mentioned below eliminated the cm_infiniband sysfs directory. This sysfs directory was tied to the cm_port object allocated in procedure cm_add_one(). Before the commit below, this cm_port object was freed via a call to kobject_put(port->kobj) in procedure cm_remove_port_fs(). Since port no longer uses its kobj, kobject_put(port->kobj) was eliminated. This, however, meant that kfree was never called for the cm_port buffers. Fix this by adding explicit kfree(port) calls to functions cm_add_one() and cm_remove_one(). Note: the kfree call in the first chunk below (in the cm_add_one error flow) fixes an old, undetected memory leak. Fixes: c87e65cfb97c ("RDMA/cm: Move debug counters to be under relevant IB device") Link: https://lore.kernel.org/r/20190916071154.20383-2-leon@kernel.org Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/core: Fix an error handling path in 'res_get_common_doit()'Christophe JAILLET
According to surrounding error paths, it is likely that 'goto err_get;' is expected here. Otherwise, a call to 'rdma_restrack_put(res);' would be missing. Fixes: c5dfe0ea6ffa ("RDMA/nldev: Add resource tracker doit callback") Link: https://lore.kernel.org/r/20190818091044.8845-1-christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04regulator: qcom-rpmh: Fix PMIC5 BoB min voltageKiran Gunda
Correct the PMIC5 BoB min voltage from 0.3V to 3V. Also correct the voltage selector accordingly. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Link: https://lore.kernel.org/r/1570184215-5355-1-git-send-email-kgunda@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-04RDMA/i40iw: Associate ibdev to netdev before IB device registrationShiraz, Saleem
i40iw IB device registration fails with ENODEV. ib_register_device setup_device/setup_port_data i40iw_port_immutable ib_query_port iw_query_port ib_device_get_netdev(ENODEV) ib_device_get_netdev() does not have a netdev associated with the ibdev and thus fails. Use ib_device_set_netdev() to associate netdev to ibdev in i40iw before IB device registration. Fixes: 4929116bdf72 ("RDMA/core: Add common iWARP query port") Link: https://lore.kernel.org/r/20190925164524.856-1-shiraz.saleem@intel.com Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com> Reviewed-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit (git 2.34.1) at 2025-09-15 13:50:33 +0000