| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit 05ca14fdb6fe65614e0652d03e44b02748d25af7.
On early silicon engineering samples observed bit shrinking issue when
we use brp as 1. Hence updated brp_min as 2. As in production silicon
this issue is fixed, so reverting the patch.
Link: https://lore.kernel.org/all/20220609082433.1191060-2-srinivas.neeli@xilinx.com
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Set return value in rsp_buf alloc error path before going to
error handling.
drivers/misc/cardreader/rtsx_usb.c:639:6: warning: variable 'ret' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (!ucr->rsp_buf)
^~~~~~~~~~~~~
drivers/misc/cardreader/rtsx_usb.c:678:9: note: uninitialized use occurs here
return ret;
^~~
drivers/misc/cardreader/rtsx_usb.c:639:2: note: remove the 'if' if its condition is always false
if (!ucr->rsp_buf)
^~~~~~~~~~~~~~~~~~
drivers/misc/cardreader/rtsx_usb.c:622:9: note: initialize the variable 'ret' to silence this warning
int ret;
^
= 0
Fixes: 3776c7855985 ("misc: rtsx_usb: use separate command and response buffers")
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220701165352.15687-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Vishal Verma:
- Fix a bug in the libnvdimm 'BTT' (Block Translation Table) driver
where accounting for poison blocks to be cleared was off by one,
causing a failure to clear the the last badblock in an nvdimm region.
* tag 'libnvdimm-fixes-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Fix badblocks clear off-by-one error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI firmware driver fixes for v5.19
Few more fixes to address:
1. Issue reported on Juno with HDLCD clock which turned out to be yet
another firmware issue. The firmware is not conformant to the spec and
we now have to workaround as this may be copied to other platforms as
well. The spec expects to return size of 3 for a range clock rate
description while the firmware returns 1. We have other ways to validate
all the 3 entries the driver reads are polpulated and we use the same
to workaround this firmware bug.
2. Optee transport not setting the correct reponse length which is similar
to the one reported earlier on Rockchip platform.
3. Drop the usage of the deprecated ida_simple_{get,remove} and migrate to the
ida_{alloc,free}
* tag 'scmi-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API
firmware: arm_scmi: Fix response size warning for OPTEE transport
firmware: arm_scmi: Relax CLOCK_DESCRIBE_RATES out-of-spec checks
Link: https://lore.kernel.org/r/20220628133315.699803-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Add a new CPU ID to the list of supported processors in the
intel_tcc_cooling driver (Sumeet Pawnikar)"
* tag 'thermal-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel_tcc_cooling: Add TCC cooling support for RaptorLake
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix some issues in cpufreq drivers and some issues in devfreq:
- Fix error code path issues related PROBE_DEFER handling in devfreq
(Christian Marangi)
- Revert an editing accident in SPDX-License line in the devfreq
passive governor (Lukas Bulwahn)
- Fix refcount leak in of_get_devfreq_events() in the exynos-ppmu
devfreq driver (Miaoqian Lin)
- Use HZ_PER_KHZ macro in the passive devfreq governor (Yicong Yang)
- Fix missing of_node_put for qoriq and pmac32 driver (Liang He)
- Fix issues around throttle interrupt for qcom driver (Stephen Boyd)
- Add MT8186 to cpufreq-dt-platdev blocklist (AngeloGioacchino Del
Regno)
- Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su)"
* tag 'pm-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / devfreq: passive: revert an editing accident in SPDX-License line
PM / devfreq: Fix kernel warning with cpufreq passive register fail
PM / devfreq: Rework freq_table to be local to devfreq struct
PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events
PM / devfreq: passive: Use HZ_PER_KHZ macro in units.h
PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER
PM / devfreq: Mute warning on governor PROBE_DEFER
PM / devfreq: Fix kernel panic with cpu based scaling to passive gov
cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist
cpufreq: pmac32-cpufreq: Fix refcount leak bug
cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt
drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
cpufreq: amd-pstate: Add resume and suspend callbacks
|
|
Merge cpufreq fixes for 5.19-rc5, including ARM cpufreq fixes and the
following one:
- Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su).
* pm-cpufreq:
cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist
cpufreq: pmac32-cpufreq: Fix refcount leak bug
cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt
drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
cpufreq: amd-pstate: Add resume and suspend callbacks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix error handling in ibmaem driver initialization
- Fix bad data reported by occ driver after setting power cap
- Fix typos in pmbus/ucd9200 driver comments
* tag 'hwmon-for-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ibmaem) don't call platform_device_del() if platform_device_add() fails
hwmon: (pmbus/ucd9200) fix typos in comments
hwmon: (occ) Prevent power cap command overwriting poll response
|
|
Because pm_runtime_get_suppliers() bumps up the rpm_active counter
of each device link to a supplier of the given device in addition
to bumping up the supplier's PM-runtime usage counter, a runtime
suspend of the consumer device may case the latter to go down to 0
when pm_runtime_put_suppliers() is running on a remote CPU. If that
happens after pm_runtime_put_suppliers() has released power.lock for
the consumer device, and a runtime resume of that device takes place
immediately after it, before pm_runtime_put() is called for the
supplier, that pm_runtime_put() call may cause the supplier to be
suspended even though the consumer is active.
To prevent that from happening, modify pm_runtime_get_suppliers() to
call pm_runtime_get_sync() for the given device's suppliers without
touching the rpm_active counters of the involved device links
Accordingly, modify pm_runtime_put_suppliers() to call pm_runtime_put()
for the given device's suppliers without looking at the rpm_active
counters of the device links at hand. [This is analogous to what
happened before commit 4c06c4e6cf63 ("driver core: Fix possible
supplier PM-usage counter imbalance").]
Since pm_runtime_get_suppliers() sets supplier_preactivated for each
device link where the supplier's PM-runtime usage counter has been
incremented and pm_runtime_put_suppliers() calls pm_runtime_put() for
the suppliers whose device links have supplier_preactivated set, the
PM-runtime usage counter is balanced for each supplier and this is
independent of the runtime suspend and resume of the consumer device.
However, in case a device link with DL_FLAG_PM_RUNTIME set is dropped
during the consumer device probe, so pm_runtime_get_suppliers() bumps
up the supplier's PM-runtime usage counter, but it cannot be dropped by
pm_runtime_put_suppliers(), make device_link_release_fn() take care of
that.
Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance")
Reported-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
|
|
Instead of passing an extra bool argument to pm_runtime_release_supplier(),
make its callers take care of triggering a runtime-suspend of the
supplier device as needed.
No expected functional impact.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
|
|
If platform_device_add() fails, it no need to call platform_device_del(), split
platform_device_unregister() into platform_device_del/put(), so platform_device_put()
can be called separately.
Fixes: 8808a793f052 ("ibmaem: new driver for power/energy/temp meters in IBM System X hardware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220701074153.4021556-1-yangyingliang@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix purgatory build process so bin2c tool does not get built
unnecessarily and the Makefile is more consistent with other
architectures.
- Return earlier simple design of arch_get_random_seed_long|int() and
arch_get_random_long|int() callbacks as result of changes in generic
RNG code.
- Fix minor comment typos and spelling mistakes.
* tag 's390-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/qdio: Fix spelling mistake
s390/sclp: Fix typo in comments
s390/archrandom: simplify back to earlier design and initialize earlier
s390/purgatory: remove duplicated build rule of kexec-purgatory.o
s390/purgatory: hard-code obj-y in Makefile
s390: remove unneeded 'select BUILD_BIN2C'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Three fixes for invalid memory accesses discovered by using KASAN
while running the lvm2 testsuite's dm-raid tests. Includes changes to
MD's raid5.c given the dependency dm-raid has on the MD code"
* tag 'for-5.19/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm raid: fix KASAN warning in raid5_add_disks
dm raid: fix KASAN warning in raid5_remove_disk
dm raid: fix accesses beyond end of raid member array
|
|
Pull block fixes from Jens Axboe:
- Fix for batch getting of tags in sbitmap (wuchi)
- NVMe pull request via Christoph:
- More quirks (Lamarque Vieira Souza, Pablo Greco)
- Fix a fabrics disconnect regression (Ruozhu Li)
- Fix a nvmet-tcp data_digest calculation regression (Sagi
Grimberg)
- Fix nvme-tcp send failure handling (Sagi Grimberg)
- Fix a regression with nvmet-loop and passthrough controllers
(Alan Adamson)
* tag 'block-5.19-2022-07-01' of git://git.kernel.dk/linux-block:
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA IM2P33F8ABR1
nvmet: add a clear_ids attribute for passthru targets
nvme: fix regression when disconnect a recovering ctrl
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG SX6000LNP (AKA SPECTRIX S40G)
nvme-tcp: always fail a request when sending it failed
nvmet-tcp: fix regression in data_digest calculation
lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One simple driver fix for a dma overrun"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Limit max hw sectors for v3 HW
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fix from Damien Le Moal:
- Fix a compilation warning with some versions of gcc/sparse when
compiling the pata_cs5535 driver, from John.
* tag 'ata-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_cs5535: Fix W=1 warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two small fixes
- Initialize a spinlock in the stm32 reset code
- Add dt bindings to the clk maintainer filepattern"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
MAINTAINERS: add include/dt-bindings/clock to COMMON CLK FRAMEWORK
clk: stm32: rcc_reset: Fix missing spin_lock_init()
|
|
An interrupt for a channel might be pending even after struct
dma_device::device_terminate_all has been called. In that case the
recently introduced warning message "restart cyclic channel..." triggers
and the channel will be restarted. This is not desired as the channel
has just been stopped. Only restart the channel when we still have a
descriptor set for it (which will be set to NULL in
sdma_terminate_all()).
Fixes: 5b215c28b9235 ("dmaengine: imx-sdma: restart cyclic channel if needed")
Cc: stable@vger.kernel.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220617115042.4004062-1-s.hauer@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The sparse tool complains as follows:
drivers/irqchip/irq-apple-aic.c:231:1: warning:
symbol 'use_fast_ipi' was not declared. Should it be static?
This symbol is not used outside of irq-apple-aic.c, so marks it static.
Fixes: 2cf68211664a ("irqchip/apple-aic: Add Fast IPI support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220618072824.562350-1-weiyongjun1@huawei.com
|
|
Commit b84dc7f0e364 ("irqchip/xilinx: Remove microblaze+zynq
dependency") relaxed the dependencies on the Xilinx interrupt controller
to be OF only, but some OF architectures (s390 for example) do not
support OF_ADDRESS and so a build of the driver will result in undefined
references to of_iomap/iounmap and friends.
Fixes: b84dc7f0e364 ("irqchip/xilinx: Remove microblaze+zynq dependency")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630111008.3838307-1-jamie@jamieiles.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 5.19
It contains 3 SoC fixes and 2 DT fixes:
SoC:
- fix the wakeup from RTC and RTT for ULP1 mode
- fix section mismatch warning
- fix SAM9X60 SiP detection
DT:
- fixes the EEPROMs compatibles for sama5d2_icp and sam9x60ek and EEPROM
size for sam9x60ek
* tag 'at91-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: pm: Mark at91_pm_secure_init as __init
ARM: at91: fix soc detection for SAM9X60 SiPs
ARM: dts: at91: sama5d2_icp: fix eeprom compatibles
ARM: dts: at91: sam9x60ek: fix eeprom compatible and size
ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt
ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt
ARM: at91: pm: use proper compatible for sama5d2's rtc
Link: https://lore.kernel.org/r/20220628135130.3114878-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The kernel test robot found this inconsistency:
drivers/soc/ixp4xx/ixp4xx-npe.c:737:34: warning:
'ixp4xx_npe_of_match' defined but not used [-Wunused-const-variable=]
737 | static const struct of_device_id ixp4xx_npe_of_match[] = {
This is because the match is enclosed in the of_match_ptr()
which compiles into NULL when OF is disabled and this
is unnecessary.
Fix it by dropping of_match_ptr() around the match.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220626074315.61209-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Remove the repeated ';' from code.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the DMA is configured for more than 8 channels the bits controlling
suspend moves to another register. However when adding support for this
the new register would be completely overwritten in one case and
overwritten with values from the old register in another case.
Found by comparing the parallel implementation of more than 8 channel
support for the StarFive JH7100 SoC by Samin.
Fixes: 824351668a41 ("dmaengine: dw-axi-dmac: support DMAX_NUM_CHANNELS > 8")
Co-developed-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220627090939.1775717-1-emil.renner.berthing@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Testing shown that when a wq mode is setup to be dedicated and then torn
down and reconfigured to shared, the wq configured end up being dedicated
anyays. The root cause is when idxd_device_wqs_clear_state() gets called
during idxd_driver removal, idxd_wq_disable_cleanup() does not get called
vs when the wq driver is removed first. The check of wq state being
"enabled" causes the cleanup to be bypassed. However, idxd_driver->remove()
releases all wq drivers. So the wqs goes to "disabled" state and will never
be "enabled". By that point, the driver has no idea if the wq was
previously configured or clean. So force call idxd_wq_disable_cleanup() on
all wqs always to make sure everything gets cleaned up.
Reported-by: Tony Zhu <tony.zhu@intel.com>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Fixes: 0dcfe41e9a4c ("dmanegine: idxd: cleanup all device related bits after disabling device")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220628230056.2527816-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit dbad41e7bb5f ("dmaengine: qcom: bam_dma: check if the runtime pm enabled")
caused unbalanced pm_runtime_get/put() calls when the bam is
controlled remotely. This commit reverts it and just enables pm_runtime
in all cases, the clk_* functions already just nop when the clock is NULL.
Also clean up a bit by removing unnecessary bamclk null checks.
Suggested-by: Stephan Gerhold <stephan@gerhold.net>
Fixes: dbad41e7bb5f ("dmaengine: qcom: bam_dma: check if the runtime pm enabled")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20220629140559.118537-1-caleb.connolly@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-06-30
This series contains updates to i40e driver only.
Lukasz adds reporting of packets dropped for being too large into the Rx
dropped statistics.
Norbert clears VF filter and MAC address to resolve issue with older VFs
being unable to change their MAC address.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Lenovo Yoga Tablet 2 830F / 830L use a panel which has been mounted
90 degrees rotated. Add a quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623112710.15693-1-hdegoede@redhat.com
|
|
The commit referenced below moved the invocation past the "next" label,
without any explanation. In fact this allows misbehaving backends undue
control over the domain the frontend runs in, as earlier detected errors
require the skb to not be freed (it may be retained for later processing
via xennet_move_rx_slot(), or it may simply be unsafe to have it freed).
This is CVE-2022-33743 / XSA-405.
Fixes: 6c5aa6fc4def ("xen networking: add basic XDP support for xen-netfront")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Split the current bounce buffering logic used with persistent grants
into it's own option, and allow enabling it independently of
persistent grants. This allows to reuse the same code paths to
perform the bounce buffering required to avoid leaking contiguous data
in shared pages not part of the request fragments.
Reporting whether the backend is to be trusted can be done using a
module parameter, or from the xenstore frontend path as set by the
toolstack when adding the device.
This is CVE-2022-33742, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Bounce all data on the skbs to be transmitted into zeroed pages if the
backend is untrusted. This avoids leaking data present in the pages
shared with the backend but not part of the skb fragments. This
requires introducing a new helper in order to allocate skbs with a
size multiple of XEN_PAGE_SIZE so we don't leak contiguous data on the
granted pages.
Reporting whether the backend is to be trusted can be done using a
module parameter, or from the xenstore frontend path as set by the
toolstack when adding the device.
This is CVE-2022-33741, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When allocating pages to be used for shared communication with the
backend always zero them, this avoids leaking unintended data present
on the pages.
This is CVE-2022-33740, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
hfa384x_usbctlx_completion_task() is bogusly using the reaper BH when
in fact this is the completion_bh. This was reflected when trying
to acquire the hw->ctlxq.lock and getting a failed lockdep class
initialized to it.
Fixes: 9442e81d7e7c ("staging/wlan-ng, prism2usb: replace completion_bh tasklet with work")
Reported-by: syzbot+ce3408364c4a234dd90c@syzkaller.appspotmail.com
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20220629165225.3436822-1-dave@stgolabs.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rtsx_usb uses same buffer for command and response. There could
be a potential conflict using the same buffer for both especially
if retries and timeouts are involved.
Use separate command and response buffers to avoid conflicts.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/07e3721804ff07aaab9ef5b39a5691d0718b9ade.1656642167.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rtsx_usb driver allocates coherent dma buffer for urb transfers.
This buffer is passed to usb_bulk_msg() and usb core tries to
map already mapped buffer running into a dma mapping error.
xhci_hcd 0000:01:00.0: rejecting DMA map of vmalloc memory
WARNING: CPU: 1 PID: 279 at include/linux/dma-mapping.h:326 usb_ hcd_map_urb_for_dma+0x7d6/0x820
...
xhci_map_urb_for_dma+0x291/0x4e0
usb_hcd_submit_urb+0x199/0x12b0
...
usb_submit_urb+0x3b8/0x9e0
usb_start_wait_urb+0xe3/0x2d0
usb_bulk_msg+0x115/0x240
rtsx_usb_transfer_data+0x185/0x1a8 [rtsx_usb]
rtsx_usb_send_cmd+0xbb/0x123 [rtsx_usb]
rtsx_usb_write_register+0x12c/0x143 [rtsx_usb]
rtsx_usb_probe+0x226/0x4b2 [rtsx_usb]
Fix it to use kmalloc() to get DMA-able memory region instead.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/667d627d502e1ba9ff4f9b94966df3299d2d3c0d.1656642167.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When allocating pages to be used for shared communication with the
backend always zero them, this avoids leaking unintended data present
on the pages.
This is CVE-2022-26365, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Pull drm fixes from Dave Airlie:
"Bit quieter this week, the main thing is it pulls in the fixes for the
sysfb resource issue you were seeing. these had been queued for next
so should have had some decent testing.
Otherwise amdgpu, i915 and msm each have a few fixes, and vc4 has one.
fbdev:
- sysfb fixes/conflicting fb fixes
amdgpu:
- GPU recovery fix
- Fix integer type usage in fourcc header for AMD modifiers
- KFD TLB flush fix for gfx9 APUs
- Display fix
i915:
- Fix ioctl argument error return
- Fix d3cold disable to allow PCI upstream bridge D3 transition
- Fix setting cache_dirty for dma-buf objects on discrete
msm:
- Fix to increment vsync_cnt before calling drm_crtc_handle_vblank so
that userspace sees the value *after* it is incremented if waiting
for vblank events
- Fix to reset drm_dev to NULL in dp_display_unbind to avoid a crash
in probe/bind error paths
- Fix to resolve the smatch error of de-referencing before NULL check
in dpu_encoder_phys_wb.c
- Fix error return to userspace if fence-id allocation fails in
submit ioctl
vc4:
- NULL ptr dereference fix"
* tag 'drm-fixes-2022-07-01' of git://anongit.freedesktop.org/drm/drm:
Revert "drm/amdgpu/display: set vblank_disable_immediate for DC"
drm/amdgpu: To flush tlb for MMHUB of RAVEN series
drm/fourcc: fix integer type usage in uapi header
drm/amdgpu: fix adev variable used in amdgpu_device_gpu_recover()
fbdev: Disable sysfb device registration when removing conflicting FBs
firmware: sysfb: Add sysfb_disable() helper function
firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointer
drm/msm/gem: Fix error return on fence id alloc fail
drm/i915: tweak the ordering in cpu_write_needs_clflush
drm/i915/dgfx: Disable d3cold at gfx root port
drm/i915/gem: add missing else
drm/vc4: perfmon: Fix variable dereferenced before check
drm/msm/dpu: Fix variable dereferenced before check
drm/msm/dp: reset drm_dev to NULL at dp_display_unbind()
drm/msm/dpu: Increment vsync_cnt before waking up userspace
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A NULL pointer dereference fix for vc4, and 3 patches to improve the
sysfb device behaviour when removing conflicting framebuffers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630072404.2fa4z3nk5h5q34ci@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - new code bugs:
- clear msg_get_inq in __sys_recvfrom() and __copy_msghdr_from_user()
- mptcp:
- invoke MP_FAIL response only when needed
- fix shutdown vs fallback race
- consistent map handling on failure
- octeon_ep: use bitwise AND
Previous releases - regressions:
- tipc: move bc link creation back to tipc_node_create, fix NPD
Previous releases - always broken:
- tcp: add a missing nf_reset_ct() in 3WHS handling to prevent socket
buffered skbs from keeping refcount on the conntrack module
- ipv6: take care of disable_policy when restoring routes
- tun: make sure to always disable and unlink NAPI instances
- phy: don't trigger state machine while in suspend
- netfilter: nf_tables: avoid skb access on nf_stolen
- asix: fix "can't send until first packet is send" issue
- usb: asix: do not force pause frames support
- nxp-nci: don't issue a zero length i2c_master_read()
Misc:
- ncsi: allow use of proper "mellanox" DT vendor prefix
- act_api: add a message for user space if any actions were already
flushed before the error was hit"
* tag 'net-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
net: dsa: felix: fix race between reading PSFP stats and port stats
selftest: tun: add test for NAPI dismantle
net: tun: avoid disabling NAPI twice
net: sparx5: mdb add/del handle non-sparx5 devices
net: sfp: fix memory leak in sfp_probe()
mlxsw: spectrum_router: Fix rollback in tunnel next hop init
net: rose: fix UAF bugs caused by timer handler
net: usb: ax88179_178a: Fix packet receiving
net: bonding: fix use-after-free after 802.3ad slave unbind
ipv6: fix lockdep splat in in6_dump_addrs()
net: phy: ax88772a: fix lost pause advertisement configuration
net: phy: Don't trigger state machine while in suspend
usbnet: fix memory allocation in helpers
selftests net: fix kselftest net fatal error
NFC: nxp-nci: don't print header length mismatch on i2c error
NFC: nxp-nci: Don't issue a zero length i2c_master_read()
net: tipc: fix possible refcount leak in tipc_sk_create()
nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
net: ipv6: unexport __init-annotated seg6_hmac_net_init()
ipv6/sit: fix ipip6_tunnel_get_prl return value
...
|
|
Clear VF MAC from parent PF and remove VF filter from VSI when both
conditions are true:
-VIRTCHNL_VF_OFFLOAD_USO is not used
-VM MAC was not set from PF level
It affects older version of IAVF and it allow them to change MAC
Address on VM, newer IAVF won't change their behaviour.
Previously it wasn't possible to change VF's MAC Address on VM
because there is flag on IAVF driver that won't allow to
change MAC Address if this address is given from PF driver.
Fixes: 155f0ac2c96b ("iavf: allow permanent MAC address to change")
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Dropped packets caused by too large frames were not included in
dropped RX packets statistics.
Issue was caused by not reading the GL_RXERR1 register. That register
stores count of packet which was have been dropped due to too large
size.
Fix it by reading GL_RXERR1 register for each interface.
Repro steps:
Send a packet larger than the set MTU to SUT
Observe rx statists: ethtool -S <interface> | grep rx | grep -v ": 0"
Fixes: 41a9e55c89be ("i40e: add missing VSI statistics")
Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Both PSFP stats and the port stats read by ocelot_check_stats_work() are
indirectly read through the same mechanism - write to STAT_CFG:STAT_VIEW,
read from SYS:STAT:CNT[n].
It's just that for port stats, we write STAT_VIEW with the index of the
port, and for PSFP stats, we write STAT_VIEW with the filter index.
So if we allow them to run concurrently, ocelot_check_stats_work() may
change the view from vsc9959_psfp_counters_get(), and vice versa.
Fixes: 7d4b564d6add ("net: dsa: felix: support psfp filter on vsc9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220629183007.3808130-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric reports that syzbot made short work out of my speculative
fix. Indeed when queue gets detached its tfile->tun remains,
so we would try to stop NAPI twice with a detach(), close()
sequence.
Alternative fix would be to move tun_napi_disable() to
tun_detach_all() and let the NAPI run after the queue
has been detached.
Fixes: a8fc8cb5692a ("net: tun: stop NAPI when detaching queues")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220629181911.372047-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When adding/deleting mdb entries on other net_devices, eg., tap
interfaces, it should not crash.
Fixes: 3bacfccdcb2d ("net: sparx5: Add mdb handlers")
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220630122226.316812-1-casper.casan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add RaptorLake to the list of processor models supported by the Intel
TCC cooling driver.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
[ rjw: Subject edits, new changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove the repeated word 'and' from comments
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220622142713.14187-1-jiangjian@cdjrlc.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Three minor bug fixes:
- qedr not setting the QP timeout properly toward userspace
- Memory leak on error path in ib_cm
- Divide by 0 in RDMA interrupt moderation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
linux/dim: Fix divide by 0 in RDMA DIM
RDMA/cm: Fix memory leak in ib_cm_insert_listen
RDMA/qedr: Fix reporting QP timeout attribute
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a regression that breaks the ccp driver"
* tag 'v5.19-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Fix device IRQ counting by using platform_irq_count()
|
|
sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When
devm_add_action() fails, sfp is not freed, which leads to a memory leak.
We should use devm_add_action_or_reset() instead of devm_add_action().
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220629075550.2152003-1-niejianglei2021@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In mlxsw_sp_nexthop6_init(), a next hop is always added to the router
linked list, and mlxsw_sp_nexthop_type_init() is invoked afterwards. When
that function results in an error, the next hop will not have been removed
from the linked list. As the error is propagated upwards and the caller
frees the next hop object, the linked list ends up holding an invalid
object.
A similar issue comes up with mlxsw_sp_nexthop4_init(), where rollback
block does exist, however does not include the linked list removal.
Both IPv6 and IPv4 next hops have a similar issue with next-hop counter
rollbacks. As these were introduced in the same patchset as the next hop
linked list, include the cleanup in this patch.
Fixes: dbe4598c1e92 ("mlxsw: spectrum_router: Keep nexthops in a linked list")
Fixes: a5390278a5eb ("mlxsw: spectrum: Add support for setting counters on nexthops")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220629070205.803952-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
