| Age | Commit message (Collapse) | Author |
|---|
|
Add support for XDP metadata on XSK RQs for cross-program
communication. The driver no longer calls xdp_set_data_meta_invalid and
copies the metadata to a newly allocated SKB on XDP_PASS.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_free_rx_mpwqe loops over all pages of a MPWQE, calling
mlx5e_page_release for ones that are not scheduled for XDP_TX or
XDP_REDIRECT; and mlx5e_page_release checks whether it's an XSK RQ or a
regular one for each page/XSK frame. This check can be moved outside the
loop to reduce the number of branches.
mlx5e_free_rx_wqe loops over all fragments, calling mlx5e_page_release
for the ones that are last in a page; and mlx5e_page_release checks
whether it's an XSK RQ or a regular one for each fragment. Using the
fact that XSK doesn't support multiple fragments, it can be optimized
for both XSK and regular usages:
1. Make an early check for XSK and call its deallocator directly, saving
3 branches (loop condition, frag->last_in_page and selection of
deallocator).
2. Call the regular deallocator directly in the non-XSK case, saving a
branch per fragment, except the first one.
After the changes, mlx5e_page_release is removed, as there are no
callers left.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_page_release calls the appropriate deallocator depending on
whether it's an XSK RQ or a regular one. Some flows that call this
function are not compatible with XSK, so they can call the non-XSK
deallocator directly to save a branch.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The SHAMPO flow is not compatible with XSK, it can call the page pool
allocator directly to save a branch.
mlx5e_page_alloc is removed, as it's no longer used in any flow.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
XSK provides a function to allocate frames in batches for more efficient
processing. This commit starts using this function on striding RQ and
creates an optimized flow for XSK. A side effect is an opportunity to
optimize the regular RX flow by dropping branching for XSK cases.
Performance improvement is up to 6.4% in the aligned mode and up to 7.5%
in the unaligned mode.
Aligned mode, 2048-byte frames: 12.9 Mpps -> 13.8 Mpps
Aligned mode, 4096-byte frames: 11.8 Mpps -> 12.5 Mpps
Unaligned mode, 2048-byte frames: 11.9 Mpps -> 12.8 Mpps
Unaligned mode, 3072-byte frames: 11.4 Mpps -> 12.1 Mpps
Unaligned mode, 4096-byte frames: 11.0 Mpps -> 11.2 Mpps
CPU: Intel(R) Xeon(R) Gold 6240 CPU @ 2.60GHz
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
XSK provides a function to allocate frames in batches for more efficient
processing. This commit starts using this function on legacy RQ, adding
a special case for XSK. The new branch introduced basically replaces the
branch that was removed from the same place a few commits before.
A check is made that DMA sync is not needed, because the batching
allocator falls back to returning one frame when DMA sync is needed, and
this is best handled by the loop in the standard case.
Performance improvement is up to 8% in the aligned mode and up to 9% in
the unaligned mode.
Aligned mode, 2048-byte frames: 12.8 Mpps -> 13.5 Mpps
Aligned mode, 4096-byte frames: 11.5 Mpps -> 12.4 Mpps
Unaligned mode, 2048-byte frames: 12.2 Mpps -> 13.4 Mpps
Unaligned mode, 3072-byte frames: 11.6 Mpps -> 12.5 Mpps
Unaligned mode, 4096-byte frames: 11.2 Mpps -> 12.2 Mpps
CPU: Intel(R) Xeon(R) Gold 6240 CPU @ 2.60GHz
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allocation of XSK frames on legacy RQ may be made more efficient with a
specialized routine that relies on certain assumptions, such as there is
only one fragment, allocation units (XSK frames) are not shared among
multiple packets. It reduces the number of branches both in the XSK code
and in the regular RQ, because with this approach there is only a single
check whether it's an XSK or regular RQ.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Legacy RQ WQEs are allocated in a loop in small batches (8 WQEs). As
partial batches are allowed, there is no point to have a loop in a loop,
so the outer loop is removed, and the batch size is increased up to the
total number of WQEs to allocate, still not smaller than 8.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The previous commit allowed allocating WQE batches in legacy RQ
partially, however, XSK still checks whether there are enough frames in
the fill ring. Remove this check to allow to allocate batches partially
also with XSK.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Legacy RQ allocates WQEs in batches. If the batch allocation fails, the
pages of the allocated part are released. This commit changes this
behavior to allow to use the pages that have been already allocated.
After this change, we need to be careful about indexing rq->wqe.frags[].
The WQ size is a power of two that divides by wqe_bulk (8), and the old
code used whole bulks, which allowed to use indices [8*K; 8*K+7] without
overflowing. Now that the bulks may be partial, the range can start at
any location (not only at 8*K), so we need to wrap them around to avoid
out-of-bounds array access.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The old calculation of wqe_index_mask may give false positives, i.e.
request bulking of pairs of WQEs when not strictly needed, for example,
when the first fragment size is equal to the PAGE_SIZE, bulking is not
needed, even if the number of fragments is odd.
Make the calculation more exact to cut false positives.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When fragments of different WQEs share the same page, mlx5e_post_rx_wqes
must wait until the old WQE stops using the page, only then the new WQE
can allocate the new page. Essentially, it means that if WQE index i is
still in use, the allocation must stop before `i % bulk`, where bulk is
the number of WQEs that may share the same page.
As bulk is always a power of two, `i % bulk = i & (bulk - 1)`, and the
new wqe_index_mask field will be equal to `bulk - 1`.
At the same time, wqe_bulk remains for optimization purposes and stores
`max(bulk, 8)`, which allows to skip the allocation until we have at
least 8 WQEs free.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MLX5E_CHANNEL_STATE_XSK flag checked in mlx5e_xsk_wakeup indicates
that XSK queues are open, but not necessarily activated. This check is
not very useful, because:
0. Both XSK setup and netdev state transitions take the same state_lock
mutex, so they can't happen at the same time.
1. If the netdev is up, xsk_is_bound can return true only when
MLX5E_CHANNEL_STATE_XSK is set on the corresponding channel.
mlx5e_xsk_wakeup is only called when xsk_is_bound is true.
2. If the XSK socket is bound, and the netdev is going up or down,
mlx5e_xsk_wakeup can take one of two branches, depending on the return
value of napi_if_scheduled_mark_missed:
2.1. True means one of two things: either NAPI was enabled at this
point, which means MLX5E_CHANNEL_STATE_XSK was also set; or NAPI was
disabled, and nothing really happened.
2.2. False means that NAPI was enabled by this point, which also implies
MLX5E_CHANNEL_STATE_XSK was set. Additionally, mlx5e_xsk_wakeup contains
a following check for MLX5E_SQ_STATE_ENABLED on async_icosq, and this
flag implies MLX5E_CHANNEL_STATE_XSK too on XSK channels.
As checking this flag doesn't cut any flows, remove the check.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_xsk_wakeup triggers an IRQ by posting a NOP to async_icosq, taking
a spinlock to protect from concurrent access. There is already a
function that does the same: mlx5e_trigger_napi_icosq. Use this function
in mlx5e_xsk_wakeup.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If create_singlethread_workqueue() fails, it returns a null pointer,
replace IS_ERR() check with NULL pointer check.
Fixes: 233cb8a47d65 ("power: supply: mt6370: Add MediaTek MT6370 charger driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: ChiaEn Wu <chiaen_wu@richtek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
After commit 75ee3f6f0c1a("power: supply: ab8500_chargalg: Drop enable/disable
sysfs"), no one use struct ab8500_chargalg_sysfs_entry, so remove it.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The mt6370-charger driver uses IIO interfaces and produces build
errors when CONFIG_IIO is not set, so it should depend on IIO.
ERROR: modpost: "iio_read_channel_processed" [drivers/power/supply/mt6370-charger.ko] undefined!
ERROR: modpost: "devm_iio_channel_get_all" [drivers/power/supply/mt6370-charger.ko] undefined!
Fixes: 233cb8a47d65 ("power: supply: mt6370: Add MediaTek MT6370 charger driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: ChiaEn Wu <chiaen_wu@richtek.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
There is a spelling mistake in the module description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are some tiny USB and Thunderbolt driver fixes and quirks.
Included in here are:
- three uas/usb-storage driver quirks to get the devices working
properly due to broken firmware images in them (they can not run at
high data rates, and are also throttled on other operating systems
because of this)
- thunderbolt bugfix for plug event delays
- typec runtime warning removal
- dwc3 st driver bugfix. Note, a follow-on fix for this will end up
coming in for 6.1-rc1 as the developers are still arguing over what
the final solution will be, but this should be sufficient for now
All of these have been in linux-next with no reported problems"
* tag 'usb-6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
uas: ignore UAS for Thinkplus chips
usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS
uas: add no-uas quirk for Hiksemi usb_disk
usb: dwc3: st: Fix node's child name
usb: typec: ucsi: Remove incorrect warning
thunderbolt: Explicitly reset plug events delay back to USB4 spec value
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
"USB-serial fixes for 6.0-rc8
Here's one more modem device id for 6.0-rc8/final.
All have been in linux-next with no reported issues."
* tag 'usb-serial-6.0-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: qcserial: add new usb-id for Dell branded EM7455
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some fixes for the v4l2 ioctl handler logic
- a fix for an out of bound access in the DVB videobuf2 handler
- three driver fixes (rkvdec, mediatek/vcodek and uvcvideo)
* tag 'media/v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: rkvdec: Disable H.264 error detection
media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ)
media: dvb_vb2: fix possible out of bound access
media: v4l2-ioctl.c: fix incorrect error path
media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args()
media: uvcvideo: Fix InterfaceProtocol for Quanta camera
|
|
Counterintuitively, mod_timer(..., jiffies + 1) will cause the timer to
fire not in the next jiffy, but in two jiffies. The way to cause
the timer to fire in the next jiffy is with mod_timer(..., jiffies).
Doing so then lets us bump the upper bound back up again.
Fixes: 50ee7529ec45 ("random: try to actively add entropy rather than passively wait for it")
Fixes: 829d680e82a9 ("random: cap jitter samples per bit to factor of HZ")
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The end_io_data member of the "struct request" type has type "void *", so
no cast is necessary.
Link: https://lore.kernel.org/r/20220928222241.131334-1-mklntf@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Markus Fuchs <mklntf@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are spelling mistakes in a log message and two comments. Fix them.
Link: https://lore.kernel.org/r/20220928222116.68294-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
One of the sysfs values reported for supported_speeds was not valid (20Gb/s
reported instead of 64Gb/s). Instead of driver internal speed mask
definition, use speed mask defined in transport_fc for reporting
host->supported_speeds.
Link: https://lore.kernel.org/r/20220927115946.17559-1-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
iblock_get_blocks()
Fold iblock_emulate_read_cap_with_block_size() into its only caller.
Link: https://lore.kernel.org/r/20220927082225.271975-1-hch@lst.de
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit b6faaaf796d7 ("scsi: qla2xxx: Serialize mailbox request") serialized
mailbox requests from userspace using the 'optrom' mutex. However, in the
case of DCBX TLV data, if the memory for it is already allocated, then the
mailbox request ends up not being serialized because it is done without
holding the 'optrom' mutex.
Link: https://lore.kernel.org/r/20220926230245.790508-1-rafaelmendsr@gmail.com
Fixes: b6faaaf796d7 ("scsi: qla2xxx: Serialize mailbox request")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
devm_ioremap_resource() already prints an error message. Remove the
redundant dev_err() call.
Link: https://lore.kernel.org/r/20220923101217.18345-1-shangxiaojing@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The megasas_dbg_lvl is a driver level parameter. Do not initialize it in
the probe path. Otherwise we will miss the debug print when binding a
new device to the megaraid driver.
Link: https://lore.kernel.org/r/1663145283-4872-6-git-send-email-kanie@linux.alibaba.com
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove memset() of pd_list and ld_ids in megasas_get_device_list().
These lists will be cleared by megasas_host_device_list_query(),
megasas_get_pd_list(), and megasas_ld_list_query().
Link: https://lore.kernel.org/r/1663145283-4872-5-git-send-email-kanie@linux.alibaba.com
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove unnecessary dcmd_ret check and goto statement.
Link: https://lore.kernel.org/r/1663145283-4872-4-git-send-email-kanie@linux.alibaba.com
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct the error message logged when allocation of ioc_init_request fails.
Link: https://lore.kernel.org/r/1663145283-4872-3-git-send-email-kanie@linux.alibaba.com
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The "id" parameter currently passed to scsi_device_lookup() when removing a
device is incorrect. It should be "ld_target_id %
MEGASAS_MAX_DEV_PER_CHANNEL".
Link: https://lore.kernel.org/r/1663145283-4872-2-git-send-email-kanie@linux.alibaba.com
Fixes: ae6874ba4b43 ("scsi: megaraid_sas: Early detection of VD deletion through RaidMap update")
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Allocate UNIT ATTENTION "BUS DEVICE RESET OCCURRED" on all LUNs on all
target ports of the device upon reception of TMF LUN RESET.
This change passes libiscsi test SCSI.MultipathIO.Reset.
Link: https://lore.kernel.org/r/20220913163602.20597-1-d.bogdanov@yadro.com
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
According to SPC4 5.12.8:
e) Retain the reservation key specified in the SERVICE ACTION RESERVATION
KEY field and associated information;
But currently sa_res_key is only used for the not existing I_T nexus. Add a
changing of the key for the existing I_T nexus the PR moved to.
Link: https://lore.kernel.org/r/20220909090425.14479-5-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
According to SPC the preempted commands shall be always aborted.
SPC-4: 5.12.11.2.6 Preempting and aborting
c) all commands from the I_T nexus(es) associated with the persistent
reservations or registrations being preempted (i.e., preempted commands)
except the PERSISTENT RESERVE OUT command itself shall be aborted as
defined in SAM-5;
Link: https://lore.kernel.org/r/20220909090425.14479-4-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Always release preempt_and_abort_list to avoid memory leak of
t10_pr_registration objects in it.
Link: https://lore.kernel.org/r/20220909090425.14479-3-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Match a key only if SARK is not zero according to SPC-4 and the comment
above the code:
If an all registrants persistent reservation is present and the SERVICE
ACTION RESERVATION KEY field is set to zero, then all registrations
shall be removed except for that of the I_T nexus that is being used
for the PERSISTENT RESERVE OUT command;
Without this patch in case of SARK==0 no registrants will be removed.
Link: https://lore.kernel.org/r/20220909090425.14479-2-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Setting ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear
routine as done by commit 0e80707d94e4c8 ("net: ethernet: mtk_eth_soc:
fix typo in __mtk_foe_entry_clear") breaks flow offloading, at least
on older MTK_NETSYS_V1 SoCs, OpenWrt users have confirmed the bug on
MT7622 and MT7621 systems.
Felix Fietkau suggested to use MTK_FOE_STATE_INVALID instead which
works well on both, MTK_NETSYS_V1 and MTK_NETSYS_V2.
Tested on MT7622 (Linksys E8450) and MT7986 (BananaPi BPI-R3).
Suggested-by: Felix Fietkau <nbd@nbd.name>
Fixes: 0e80707d94e4c8 ("net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear")
Fixes: 33fc42de33278b ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/YzY+1Yg0FBXcnrtc@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support restart of link auto-negotiation.
This may be initiated using:
# ethtool -r <intf>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Report the auto negotiation capability if it's supported
in management firmware, and advertise it if it's enabled.
Changing port speed is not allowed when autoneg is enabled.
The ethtool <intf> command displays the auto-neg capability:
# ethtool enp1s0np0
Settings for enp1s0np0:
Supported ports: [ FIBRE ]
Supported link modes: Not reported
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Supported FEC modes: None RS BASER
Advertised link modes: Not reported
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: None RS BASER
Speed: 25000Mb/s
Duplex: Full
Auto-negotiation: on
Port: FIBRE
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Considering that whether application firmware is indifferent to
port speed is a firmware property instead of port property, now use
a new rtsym to get the property instead of parsing per-port tlv caps.
With this change, relevant code is moved to `nfp_main` layer.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's not a fatal error when setting `hwinfo` into management firmware
fails, no need to halt the whole driver initialization process.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The latest management firmware can now report the active FEC
mode. Adapt driver accordingly so that user can get the active
FEC mode by running command:
# ethtool --show-fec <intf>
Also correct use of `fec` field.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rtl_disable_rxdvgate() is used for disable RXDV_GATE. It is opposite function
of rtl_enable_rxdvgate().
Disable RXDV_GATE does not have to delay. So in this patch, also remove the
delay after disale RXDV_GATE.
Signed-off-by: Chunhao Lin <hau@realtek.com>
Link: https://lore.kernel.org/r/20220928171356.3951-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next
- Add RTL8761BUV device (Edimax BT-8500)
- Add a new PID/VID 13d3/3583 for MT7921
- Add Realtek RTL8852C support ID 0x13D3:0x3592
- Add VID/PID 0489/e0e0 for MediaTek MT7921
- Add a new VID/PID 0e8d/0608 for MT7921
- Add a new PID/VID 13d3/3578 for MT7921
- Add BT device 0cb8:c549 from RTW8852AE
- Add support for Intel Magnetor
* tag 'for-net-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (49 commits)
Bluetooth: hci_sync: Fix not indicating power state
Bluetooth: L2CAP: Fix user-after-free
Bluetooth: Call shutdown for HCI_USER_CHANNEL
Bluetooth: Prevent double register of suspend
Bluetooth: hci_core: Fix not handling link timeouts propertly
Bluetooth: hci_event: Make sure ISO events don't affect non-ISO connections
Bluetooth: hci_debugfs: Fix not checking conn->debugfs
Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times
Bluetooth: MGMT: fix zalloc-simple.cocci warnings
Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure
Bluetooth: use hdev->workqueue when queuing hdev->{cmd,ncmd}_timer works
Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create()
Bluetooth: RFCOMM: Fix possible deadlock on socket shutdown/release
Bluetooth: hci_sync: allow advertise when scan without RPA
Bluetooth: btusb: Add a new VID/PID 0e8d/0608 for MT7921
Bluetooth: btusb: Add a new PID/VID 13d3/3583 for MT7921
Bluetooth: avoid hci_dev_test_and_set_flag() in mgmt_init_hdev()
Bluetooth: btintel: Mark Intel controller to support LE_STATES quirk
Bluetooth: btintel: Add support for Magnetor
Bluetooth: btusb: Add a new PID/VID 13d3/3578 for MT7921
...
====================
Link: https://lore.kernel.org/r/20221001004602.297366-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Return the value of_clk_add_hw_provider() directly instead of storing it
in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220906072322.337253-1-ye.xingchen@zte.com.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
pm_runtime_get_sync() will increment pm usage counter.
Forgetting to putting operation will result in reference leak.
Add missing pm_runtime_put_sync in some error paths.
Fixes: 9ac33b0ce81f ("CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220602030838.52057-1-linmq006@gmail.com
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Renesas Versaclock7 is a family of configurable clock generator ICs
with fractional and integer dividers. This driver has basic support
for the RC21008A device, a clock synthesizer with a crystal input and
8 outputs. The supports changing the FOD and IOD rates, and each
output can be gated.
Signed-off-by: Alex Helms <alexander.helms.jy@renesas.com>
Link: https://lore.kernel.org/r/20220912183613.22213-3-alexander.helms.jy@renesas.com
Tested-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
In ti_find_clock_provider(), of_find_node_by_name() will call
of_node_put() for the 'from' argument, possibly putting the node one too
many times. Let's maintain the of_node_get() from the previous search
and only put when we're exiting the function early. This should avoid a
misbalanced reference count on the node.
Fixes: 51f661ef9a10 ("clk: ti: Add ti_find_clock_provider() to use clock-output-names")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220915031121.4003589-1-windhl@126.com
[sboyd@kernel.org: Rewrite commit text, maintain reference instead of
get again]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
